Neok UltimateS Kernel v3.9Ti
2.6.38.8, 128-1190, CFS, NOOP/CFQ/BFQv2/SIO/VR, SWAP, SLAB, HAVS, AXI, HW3D kernel included (base on Tiamat 4.0.6)
my Kernel changeset (compare Tiamat4.0.6)
- Amazing Smooth working
- Add SIO IO Scheduler
- Add VR IO Scheduler
- Change kernel optimization flags
- Compiled by 2011.10 Linaro GCC4.5.4 with -O2 and other optimization flags
- CFS Tweak (SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 0))
- Applied Preempt TinyRCU & RCU Booster
- Applied RCU Optimization
- Applied RCU FAST NO HZ
- Added InteractiveX cpu governor
- Default IO Scheduler set to noop
- Config.hz 500HZ
- Improve battery efficiency
- Improve battery AVS Code (source by Intersect-Raven)
- support call record (source by cm7)
- WIFI Driver change to pershoot's kernel driver
(no problem at wifi channel 13)
- Support Voltage Control (VDD Control - /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs)
- Ondemand tweak
- Support AXI,HW3D
- CPU Clock control 128-1190 (not recomanded 128Mhz at AXI Kernel)
- Improve SDHC card stability
- Ultra save battery
mesured Current-widget - minimum 2mA at sleep
3.2r1 -> 3.3 changeset
- change smartass codes and tweak
3.3 -> 3.7 changeset
- change AVS, Cpufreq Driver
- Excluded Smartass governor
- add SmartassV2 CPU Governor
- add Lagfree CPU Governor
- add Lazy CPU Governor
- VFP Compile flag change
- module tun.ko, cifs.ko
- change WIFI Driver by pershoot
3.7 -> 3.9 changeset
- High frequency cpu clock AVS Votage change for improve stability
- amplification sound
- Compiled by Linaro GCC 4.5.4 (2011.08)
- fuse module
- Other module settings changed
KERNEL works on Cyanogenmod, MIUI, Oxygen(higher version) Rom
Strongly recomand "Ondemand" governor
it's smoothest
experience "Extreme Smooth"
Better than iphone4 or GalaxyS2
Next Kernel will be change to base on CM7 Stock kernel
Happy new year!!!!!
Thanks to Cayniarb, Cyanogenmod team, intersectRaven, ch33kybutt, pershoot
Wipe dalvik-cache after update
KGPNeok Nexroid UltimateS v3.3 Kernel source (for developer only)
http://www.multiupload.com/3HIM8VGVMD
Dude, you know how to catch us
Testing it now...
Sent from my Nexus One using Tapatalk
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
what governor works best?
Markdental said:
what governor works best?
Click to expand...
Click to collapse
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
How install it? Should i put the zip on the SD card and install it in the bootloader?
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
ebautista said:
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
Click to expand...
Click to collapse
thanks
Markdental said:
what governor works best?
Click to expand...
Click to collapse
i strongly recommand ondemand
bunnahabhain said:
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
Click to expand...
Click to collapse
smartass is bad working on my kernel
strongly recommand ondemand
giganielsie said:
How install it? Should i put the zip on the SD card and install it in the bootloader?
Click to expand...
Click to collapse
update on recovery mode
cpm said:
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
i tried to add smartassv2 but it has some problem
sorry
texasice said:
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
Click to expand...
Click to collapse
that's very interesting
if you provide kernel source,
i'm try to build kernel
revthanki said:
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Click to expand...
Click to collapse
alisabki said:
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
Click to expand...
Click to collapse
it's little change
added Improve SDHC card stability on r1 version
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
kgp700 said:
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
Click to expand...
Click to collapse
need to wipe dalvik cache too right?
alisabki said:
need to wipe dalvik cache too right?
Click to expand...
Click to collapse
recommand that
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
pongalong said:
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
Click to expand...
Click to collapse
yes, this kernel working on oxygen1mod
but old version is not working
working on OxygeN1mod-2011.11.26 version or higher version
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
DaxElectro said:
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
thanks!!
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
aujbman said:
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
Click to expand...
Click to collapse
4 hours with lastest kernel (r2) and Wifi ON. No problems at all.
Related
Before you do anything: I will not be held responsible for anything bad that happens to your phone.
Hello World! I want to share with you my first kernel for our N1. It's based on the great job of Evervolv team, texasice and the rest of developers that contribute with this great ROM running Jellybean 4.2.
Please, consider that this is a personal experiment with kernel builds, so don't expect a dedicated personal support but I accept all your comments.
This kernel should work in Evervolv and CM10.1 ROMs.
What will you installing exactly in v0.7?
Based in Evervolv's Jellybean repo (android_kernel_htc_qsd8k)
Applied UKSM patches.
Built with Linaro v4.7 toolchain
Added some extra CPU governors. Full list available:
- lionheart smartassV2 interactive conservative userspace powersave ondemand performance
Added SIO scheduler
Applied patch for events waiting to get input_event lock: https://code.google.com/p/android/issues/detail?id=42265#c162 (hope to fix some GUI lags)
Zen scheduler set to default (new in 0.7)
Other few changes (new in 0.7)
Downloads
msku-kernel-xtra-for-Evervolv-0.7.zip
Code pushed to my [new] github account: https://github.com/figue/android_kernel_htc_qsd8k
Full changelog, references and some tests look here
Instructions
Push it to sdcard
Flash into recovery
Wipe only cache+dalvik
To revert your kernel to stock, flash your ROM again.
reserved
jolinnard said:
Instructions
Push it to sdcard
Flash into recovery
Wipe only cache+dalvik
To revert your kernel to stock, flash Evervolv's ROM again.
To test SIO scheduler, use SetCPU or another similar. To do it manually, execute in adb shell or terminal emulator (type "su" first):
Code:
for p in /sys/devices/virtual/mtd/mtd*/mtdblock*/queue/scheduler ; do echo sio > $p ; done
Right now I'm having great results with lionheart governor. Try it...
Click to expand...
Click to collapse
Could you please tell us the benefits of using your kernel versus stock kernel? For example, sounds, wifi, speed, etc....
Reasons are simple: you have more governors and schedulers to choice, UKSM patches are an experiment that maybe free more memory (something to read about it), but I'm not sure that it's working in Android. Only can say that it works great on my device. And with my kernel you can test the proposed patch for the "famous" entropy bug (well, at least the only real that it's proposed by Android developers, not placebo).
But try it yourself and test it!
Sent from my Nexus One using xda premium
w0w! c00l! Thanks, I'll give a try...
Works smooth on Evervolv Nightly 05/01 with Lionheart governor... Will try other governor n will update if got any issues. Thanks for the kernel, thought kernel update for N1 is dead. Hope more to come. Thanks again!
Suddenly reboot.. Huhu... Here the logcat... Thanks
http://pastebin.com/raw.php?i=6MRYZQfn
clustered said:
Suddenly reboot.. Huhu... Here the logcat... Thanks
http://pastebin.com/raw.php?i=6MRYZQfn
Click to expand...
Click to collapse
Thanks, don't know what's happening, I was running 2 days without any issues. I'm removing kernels meanwhile.
When I was on previous nightly 05/01, it was running fine.. Update to latest nightly 11/01 it start to reboot again n again. I flashed back the latest nightly, now fine. Maybe you could take a look from the latest nightly... Thanks...
Sent from my Nexus One using xda app-developers app
I restart all kernel changes. I've uploaded a first version to test. If somebody wants to try:
v0.5
It's a boot.img, flash from bootloader (fastboot flash boot boot-0.5.2.img) or recovery (flash_image boot /sdcard/0/boot-0.5.2.img).
jolinnard said:
I restart all kernel changes. I've uploaded a first version to test. If somebody wants to try:
v0.5
It's a boot.img, flash from bootloader (fastboot flash boot boot-0.5.2.img) or recovery (flash_image boot /sdcard/0/boot-0.5.2.img).
Click to expand...
Click to collapse
No reboot for me with this version... With the previous version I had reboot using smartassv2, now using lionheart it works just fine!
Will give a try later on when in front of PC.. Got zip version? Can try now.. Thanks
Sent from my Nexus One using xda app-developers app
v0.5 seem to be working well. I'm using the Evervolv 11th daily build and it seems zippier than the default kernel. What's new in v0.5?
yulius said:
v0.5 seem to be working well. I'm using the Evervolv 11th daily build and it seems zippier than the default kernel. What's new in v0.5?
Click to expand...
Click to collapse
v0.5 it's a rebased version. Only applied SIO scheduled and lionheart (both set to default)
jolinnard said:
v0.5 it's a rebased version. Only applied SIO scheduled and lionheart (both set to default)
Click to expand...
Click to collapse
Just pushed 0.6. Check the OP.
This version includes all previous patches (so UKSM enabled again) and it shouldn't crash.
The OP has a bad link for the download but the changelog link is good and has the zip. So far the kernel is looking good.
yulius said:
The OP has a bad link for the download but the changelog link is good and has the zip. So far the kernel is looking good.
Click to expand...
Click to collapse
Fixed!
I get this error in the logs. I don't know if it's relevant or not.
E/PowerHAL( 476): Error opening /sys/kernel/mm/ksm/sleep_millisecs: No such file or directory
The uksm directory exists. This doesn't seem to be affecting anything on the phone for me.
yulius said:
I get this error in the logs. I don't know if it's relevant or not.
E/PowerHAL( 476): Error opening /sys/kernel/mm/ksm/sleep_millisecs: No such file or directory
The uksm directory exists. This doesn't seem to be affecting anything on the phone for me.
Click to expand...
Click to collapse
Yeah, I noticed the same too. Probably it's because I set strategy to UKSM in kernel config and PowerHAL it's set to search into KSM directory. I need to investigate a bit more.
Almost 2 days on this latest kernel... works fine, smooth without any problem at all... running lionheart governor... thanks anyway...
Hi guys....i'm an experienced developer who ported CM9 on lg P500......today i have a Galaxy SIII Mini and i want to start to develop for this device. Meanwhile i'm helping oliver for cm10, i want to develop a custom kernel. The objective is to have good battery life and great perfomances.
Changelog for v2:
MultiCore Sched Support
JRCU (an RCU optimized for multicore devices)
Optimized Arm RWSem Algorithm
Autogroup Sched
LowmemoryKiller updated to latest version and enabled an option that calculates automatically oom values
Added some Mali patches (thanks to cocafe)
SLQB memory allocator
Row I/O Scheduler default
JIT compiler for net packages
CleanCache
A lots of new Governors
A lots of patches that you can find here: https://github.com/lupohirp/GoldenKernel/commits/master
BUG!!!!! : Reboot option doesn't work. Must fix this in samsung drivers!
Here's changelog for v1:
Kernel compiled with linaro gcc 4.7.3
Added hotplug and pegasusq governor
Cpu unaligned specified path
Dynamic fsync control
Here's the download link(V2):https://hotfile.com/dl/202694028/d947bb6/goldenkernelv2.zip.html
Kernel Sources Here: https://github.com/lupohirp/GoldenKernel
Change Governor with setcpu or nofrills. I reccomend to use OnDemandQ governor for this reason: OnDemandQ disable the second core when is not needed and reactivate it when cpu load is heavy. the result is a great perfomance with a a really good battery drain
For install this FLASH WITH RECOVERY!!!
lupohirp said:
Hi guys....i'm an experienced developer who ported CM9 on lg P500......today i have a Galaxy SIII Mini and i want to start to develop for this device. Meanwhile i'm helping oliver for cm10, i want to develop a custom kernel. The objective is to have good battery life and great perfomances.
Here's changelog for v1
Kernel compiled with linaro gcc 4.7.3
Added hotplug and pegasusq governor
Cpu unaligned specified path
Dynamic fsync control
Here's the download link:https://hotfile.com/dl/196945944/e6599fb/GoldenKernelv1.zip.html
Change Governor with setcpu or nofrills. I reccomend to use hotplug governor for this reason: hotplug disable the second core when is not needed and reactivate it when cpu load is heavy. the result is a great perfomance with a a really good battery drain
For install this FLASH WITH RECOVERY!!!
Click to expand...
Click to collapse
Have you compiled it using goldennfc_config?
lupohirp said:
Hi guys....i'm an experienced developer who ported CM9 on lg P500......today i have a Galaxy SIII Mini and i want to start to develop for this device. Meanwhile i'm helping oliver for cm10, i want to develop a custom kernel. The objective is to have good battery life and great perfomances.
Here's changelog for v1
Kernel compiled with linaro gcc 4.7.3
Added hotplug and pegasusq governor
Cpu unaligned specified path
Dynamic fsync control
Here's the download link:https://hotfile.com/dl/196945944/e6599fb/GoldenKernelv1.zip.html
Change Governor with setcpu or nofrills. I reccomend to use hotplug governor for this reason: hotplug disable the second core when is not needed and reactivate it when cpu load is heavy. the result is a great perfomance with a a really good battery drain
For install this FLASH WITH RECOVERY!!!
Click to expand...
Click to collapse
thx a lot for your work, have installed, there is one problem i can see at once, i can not set cpu freq above 800, when you set to 1000 it´s changes to 800
Edit: forget about 800, i did not understood power saving mode , but governor choice does not persist reboot
Installed and setCPU governor to hotplug and I will see how it goes.
Is it possible to have also stock CWR kernel , just in case...?
Re: [Kernel]GoldenKernel[v1]
There's dariolob 's CWM stock kernel here for I8190 only here: http://forum.xda-developers.com/attachment.php?attachmentid=1763968&d=1361921910
Sent from my GT-I8190 using xda premium
Thanks alot! Testing it now
btw..update says flashing BLN kernel. Maybe you wanna change that.
---------- Post added at 02:20 PM ---------- Previous post was at 02:16 PM ----------
funiewski said:
thx a lot for your work, have installed, there is one problem i can see at once, i can not set cpu freq above 800, when you set to 1000 it´s changes to 800
Click to expand...
Click to collapse
Make sure you don't have cpu power saving mode on in powersaving settings. Otherwise you'll get max 800.
gonna try now
core7x said:
gonna try now
Click to expand...
Click to collapse
If your signature is correct you have the -N version S3 mini would you try to switch NFC on after flashing the kernel? if it works it means he used the right configuration file when compiling and the kernel is universal for all the I8190 variants Thank you very much!
tys0n said:
Thanks alot! Testing it now
btw..update says flashing BLN kernel. Maybe you wanna change that.
oooppps i have used BLN ramdisk for base
---------- Post added at 02:20 PM ---------- Previous post was at 02:16 PM ----------
Make sure you don't have cpu power saving mode on in powersaving settings. Otherwise you'll get max 800.
Click to expand...
Click to collapse
dariolob said:
If your signature is correct you have the -N version S3 mini would you try to switch NFC on after flashing the kernel? if it works it means he used the right configuration file when compiling and the kernel is universal for all the I8190 variants Thank you very much!
Click to expand...
Click to collapse
no it is only for model without nfc. But i can do a NFC version for those that have this model
lupohirp said:
no it is only for model without nfc. But i can do a NFC version for those that have this model
Click to expand...
Click to collapse
Thank you very much it would be awesome :victory: You just have to compile using goldennfc_config and the kernel will be suitable for both versions
Re: [Kernel]GoldenKernel[v1]
Whoa seemed ok until I turned off power saving then I started getting some serious battery drain..
Sent from the dark side on my GT-I8190
Re: [Kernel]GoldenKernel[v1]
Seems to of gone back to normal after a charge.. I don't know what caused the drain, the phone was sleeping
Sent from the dark side on my GT-I8190
R: [Kernel]GoldenKernel[v1]
but it's fine on 4.1.1?
Sent from my GT-I8190 using xda app-developers app
Good news! thanks for the work!
hello ... how come when I try to install from cwm recovery tells me failed?'ve also done wipe cache / davil
help!
maxsara78 said:
hello ... how come when I try to install from cwm recovery tells me failed?'ve also done wipe cache / davil
help!
Click to expand...
Click to collapse
What error you get?
Try to turn off signature verification check in cwm if that's what get you errors.
tys0n said:
What error you get?
Try to turn off signature verification check in cwm if that's what get you errors.
Click to expand...
Click to collapse
just tells me failed .... twrp-2.4.2.0-golden.....where you disable signature verification? I'm sorry ...
maxsara78 said:
just tells me failed .... where you disable signature verification? I'm sorry ...
Click to expand...
Click to collapse
I think it's under "install zip..." You can toggle signature verification on/off.
Anybody experience problems to backup ROM through Rom Manager?
tys0n said:
I think it's under "install zip..." You can toggle signature verification on/off.
Click to expand...
Click to collapse
thanks for the help, but also doing as you say failed me .... I do not understand ... now I try to re-download the zip .... thanks again
Kernel Features:
- Sony 6.2.A.0.400 /.402 /.404
- Linaro-4.6.2
- Automatic process group sheduling
- Memory compaction
- KSM
- Cleancache
- SLUB allocator
- SWAP/ZRAM
- LZMA kernel compression mode
- 5GHz band support
- NTFS
- ext 3 / 4
- CIFS
- CWM 6.0.2.8
- modified ramdisk from Xperia GO
- RootExplorer is working
- Governers:
hotplugx
interactivex
pegasusq
smartassv2
powersave
ondemand
ondemandq
ondemandx
performance
userspace
- I/O Shedulers:
noop
deadline
CFQ
SIO
VR
ROW
Credits:
DeepUnknown for his advices and help
FXP for recovery
munjeni for his JB rom for Sola
Sony for Kernel Source Code
Sources:
Github
Recomendation:
Use Ondemand+SIO with v3.2 of the kernel.
Downloads:
Dev-host:
kernel.img - 6.50 MB
CWM.zip - 6.63 MB
Mirror (old version included):
Mediafire
How To Flash:
1. fastboot flash boot your_kernel.img
or flash .zip via CWM recovery
2. Enter CWM (button Volume Up untill the second vibrate) and make wipe cache partition and wipe dalvik cache
3. Reboot
Changelog in the second post.
Changelog:
[31-5-2013] Version 3.2
- linaro-4.6.2
- SQLB Allocator
- shed.c patching
- increase readahead value
- disable preemption in machine_shutdown
- ARM_THUMBEE support
- CIFS, NTFS , FUSE as external modules
- salvage some RAM
- random: entropy tweaks
[31-5-2013] Version 2.2 second edition
- modified ramdisk
- increase performance and ram
- battery life
- hope finally fixed mounting /system
[27-5-2013] Version 2.2
- zcache
- added interactive gov
[23-5-2013] Version 2.1
just
- fix blue frames
- fix softtouch button double touch
- App FC's
[23-5-2013] Version 3.1 - unstable, deleted
- zcache deleted
[23-5-2013] Version 3.0 - unstable, deleted
- Linaro-4.8
- O2 optimization
- google snappy drivers (compression / decompression)
- zcache
- fix blue frames
- fix softtouch button double touch
[20-5-2013] Version 2.0
- Initial Release
Version 1.0
- skipped
will work on jb from munjeni??
Yes, it works with munjeni's rom
Sent from my MT27i using xda app-developers app
Please make a mirror in devhost can dl in yandisk
ianjay06 said:
Please make a mirror in devhost can dl in yandisk
Click to expand...
Click to collapse
Another link : https://www.box.com/s/gud4oo28re7n4hxr3foo
tapatalk
Can I jus fastbot this kernel and flash jmunjeni's jb??? Or fastbot kernel from the zip then flash the jb let it settles then flash ur kernel
ianjay06 said:
Can I jus fastbot this kernel and flash jmunjeni's jb??? Or fastbot kernel from the zip then flash the jb let it settles then flash ur kernel
Click to expand...
Click to collapse
Flash already the jb kernel and after when all is ok, flash this kernel on cw .i think...
Test tomorrow for me
tapatalk
ianjay06 said:
Can I jus fastbot this kernel and flash jmunjeni's jb???
Click to expand...
Click to collapse
where can I find munjeni'jb?
ianjay06 said:
Please make a mirror in devhost can dl in yandisk
Click to expand...
Click to collapse
OK, just made
ianjay06 said:
Can I jus fastbot this kernel and flash jmunjeni's jb??? Or fastbot kernel from the zip then flash the jb let it settles then flash ur kernel
Click to expand...
Click to collapse
Didn't try "clean" installation munjeni's rom on my kernel, just flashed on the installed. But my JB rom installed OK.
Sent from my MT27i using xda app-developers app
Confirmed, this kernel works on munjeni rom, just flashed with cwm.
First of all,thank you for your great work.
I think you should add 100 and 600mhz to the frequencies too...also, no oc/linaro optimizations?
Eth4n said:
no oc/linaro optimizations?
Click to expand...
Click to collapse
working on it
Eth4n said:
Confirmed, this kernel works on munjeni rom, just flashed with cwm.
First of all,thank you for your great work.
I think you should add 100 and 600mhz to the frequencies too...also, no oc/linaro optimizations?
Click to expand...
Click to collapse
+1
Adding 100mhz and 600mhz would be really great combo with oc!
Also someone please report performance, if at all any FCs or reboots and battery drain??
Sent from my MT27i using xda app-developers app
dwaipayanray95 said:
+1
Adding 100mhz and 600mhz would be really great combo with oc!
Also someone please report performance, if at all any FCs or reboots and battery drain??
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
100MHz is tool low, about 200MHz is optimal minimun, less that that can actually cause drains and stability issues.
matood said:
100MHz is tool low, about 200MHz is optimal minimun, less that that can actually cause drains and stability issues.
Click to expand...
Click to collapse
Nope nothing like that....
Vengeance 1.24 had 100Mhz support. Even with powersave governor my phone was operational.
Doesn't cause any stability or battery drain issues!
FCs on heavy games and can't set options on stock camera..
okram001 said:
FCs on heavy games and can't set options on stock camera..
Click to expand...
Click to collapse
In two or three days I'll make new version and try to resolve the issues.
Just tell me are there any FCs on heavy games on munjeni's kernel?
alivanov79 said:
In two or three days I'll make new version and try to resolve the issues.
Just tell me are there any FCs on heavy games on munjeni's kernel?
Click to expand...
Click to collapse
Yes, munjeni's also FCs but I can play for 1 or 2 mins.. In this kernel.. I can't play it just FCs
Don't add OVERCLOCK to the Kernel please.
Features:
Sony sources 12.0.A.1.257
Linaro 4.6.2
Neon Optimizations
Overclock up to 1.89GHz (disabled)
Dynamic Fsync
RAM optimization
WiFi optimization
CIFS, NTFS as external modules
kernel level Sound Control (how to)
CPU Voltage Control interface (VDD) (how to)
NLS_UTF8
ro.secure=0
/rootfs and /system mounted as rw
Init.d support
CWM 6.0.3.2
Governors:
- Interactive
- Ondemand
- Performance
- Powersave
- Conservative
- Userspace
I/O shedulers:
- SIO
- Deadline
- noop
...
Credits:
@varun.chitre15 for CWM 6.0.3.5
@DoomLord for ramdisk
@sj8023ld for CWM 6.0.3.2
How To Flash:
fastboot flash boot your_kernel.elf or flash .zip via CWM recovery
Enter CWM (button Volume Up) and make Wipe Cache Partition and Wipe Dalvik Cache
Reboot
Downloads:
CWM 6.0.3.2: sp_kernel_cwm.zip
CWM 6.0.3.5: sp_kernel_cwm.zip
Sources:
Github
Changelog:
[06.08.2013] v4
- synchronized numbers of versions between 4pda forum and xda forum
- Add a simple GPU governor for Adreno xxx GPU series
- Optimized simple GPU governor for Adreno xxx GPU series
- Intellidemand governer
- Some perf optimization
- version with CWM 6.0.3.5
[29.07.2013] v2.2
- deadline optimized
- ZSMALLOC
- ZRAM (module)
- ZRAM optimized for Android
- KSM
- ARM THUMBEE
[18.07.2013] v2.1
- fiops i/o shed
- row i/o shed
[09.07.2013] v2
Some minor changes:
- without overclock
- disabled dynamic file sync as it causes display flickering when locking
[08.07.2013] v1
- first version
alivanov79 said:
Changelog:
[08.07.2013]
- first version
Click to expand...
Click to collapse
Excellent giving this a try and let you know the feedback soon.
cool! going to flash it now
can i flash it on lock bootloader????
saberamani said:
can i flash it on lock bootloader????
Click to expand...
Click to collapse
+1
saberamani said:
can i flash it on lock bootloader????
Click to expand...
Click to collapse
NO.
To flash any custom kernel you must unlock bootloader first.
Updated the kernel:
[09.07.2013] v2
Some minor changes:
- without overclock
- disabled dynamic file sync as it causes display flickering when locking
nice, noticed screen flickering too when locking, after 2 days i didnt find any bugs or problems
can you add fiops scheduler and extra governors like intellidemand and Wheatley ?
tr0llica said:
nice, noticed screen flickering too when locking, after 2 days i didnt find any bugs or problems
can you add fiops scheduler and extra governors like intellidemand and Wheatley ?
Click to expand...
Click to collapse
Will do
Whats the difference between this kernel and the one from doomlord?
Redeque said:
Whats the difference between this kernel and the one from doomlord?
Click to expand...
Click to collapse
See commits on github and description in OP
Hi i flashed ur Kernel over Doom's One. One Question. Can i need to flash the Module.zip separately ? For a better wifi Connection ?
Edit:
That Module.zip not seems to be a flashable one... Whats the use of it. ? Pls explain. I am asking because i am not find any description about it in OP... I really need that after flashing SP kernel ?
Thanks in advance
Rajeev said:
Hi i flashed ur Kernel over Doom's One. One Question. Can i need to flash the Module.zip separately ? For a better wifi Connection ?
Edit:
That Module.zip not seems to be a flashable one... Whats the use of it. ? Pls explain. I am asking because i am not find any description about it in OP... I really need that after flashing SP kernel ?
Thanks in advance
Click to expand...
Click to collapse
Yes, it's not flashable .zip. You don't need to install them. The kernel works with stock ones OK. There are only two modules that can be needed: cifs.ko and ntfs.ko.
The free ram never low than 200M. The minimum RAM is too big. Can you redistribute RAM? For example the minimum RAM to 50M. I want to play the Vegas but SP always kill the game process because RAM not enough. Sorry for my poor English.
某龙兄 said:
The free ram never low than 200M. The minimum RAM is too big. Can you redistribute RAM? For example the minimum RAM to 50M. I want to play the Vegas but SP always kill the game process because RAM not enough. Sorry for my poor English.
Click to expand...
Click to collapse
Yes. That is a problem.
On the other hand, is there any way to install only a voltage module instead the whole kernel? I've got no unlockable bootloader i fear.
lanluckez said:
Yes. That is a problem.
On the other hand, is there any way to install only a voltage module instead the whole kernel? I've got no unlockable bootloader i fear.
Click to expand...
Click to collapse
I think there is no way...
Hi, cwm don't flash updatepacks. It's show flash but nothing. I must copy all with aroma filemanager . Thanks
Gesendet von meinem Xperia SP
joke19 said:
Hi, cwm don't flash updatepacks. It's show flash but nothing. I must copy all with aroma filemanager . Thanks
Gesendet von meinem Xperia SP
Click to expand...
Click to collapse
In order to check I deodexed my rom via CWM and install Xperia Honami Home & Widgets via CWM. Have installed them from external sd card and everything is OK.
Maybe updater-script in your flashable .zip is wrong?
Been using this kernel now for a 6 days and everything is fine but the music skips! i've tried several players and this happens!
Custom Cyanogenmod12 kernel for the LG G Pad 8.3 V510 (GPE)
Updated 2-21-15 Added FastCharge and three other IO Schedulers to play with. Made Row the default scheduler, and turned off Knock-on by default. Use my app from the second post to activate Knock-on after each boot.
The CyanogenMod12 ROM can be downloaded from HERE
Thank you @aidfarh for all of your hard work!
Custom Kernel built from the cyanogenmod12 kernel source - Download Below
*NOTE - This kernel currently works with stock lollipop as well!
Features:
Flash Through Recovery!
Interactive Governer as default
Compiled using Linaro Toolchain cortex a15-4.9.3
o3 Compile optimizations
Knock-on enabled through app in second post
Fastcharge added as option - enable using Trickstermod
Row, Sio, Fiops, and Zen IO Schedulers added - trickstermod to change
Sound Control using TricksterMod
LCD Screen Control using TricksterMod
Fsync On/Off using Trickstermod (off as default)
User Space Voltage Control - TricksterMod or my 88sleektweaks init.d script to change.
Exfat support (2-4-15 and later CyanogenMod version)
Lots of optimizations with more to come!
The kernel source and Commits that show all changes for this kernel can be found here:GITHUB
Prerequisites
Unlocked bootloader
Root
Install Busybox for init.d support
TricksterMod is recommended for changing settings
How does this work?
Start by making a Backup of your boot in recovery, then:
Flash the latest version in Recovery . Proceed to the downloads below, download to your tablet, reboot into recovery and install the zip --That simple!
if you want to build your own kernel start to finish with complete instructions, you can follow my guide for rolling your own kernel HERE
Please hit "Thanks" to show your support!
DOWNLOAD HERE:
ATTACHED FILES
Knock-on app for my kernel can be downloaded here.
To add my sleektweeks init.d file, and/or the Zipalign file, see my post: HERE
Updated -SleekCyan2 - to include exfat support, LCD screen control, and further optimizations for GPU and the linaro toolchain.
Updated - SleekCyan3 - to include knock-on by default, removal of some debugging, quicker deep sleep. (better battery?)
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
Exfat support for sdcards now works out of the box with CyanogenMod version 2-4-15 and later.
So I flashed this last night when I saw you posted it recently and this morning I checked it and it had zero battery drain overnight, very nice. Can't wait to dig in a little deeper when I get time. Between this and the new CM12, 2015 is really shaping up to be a good year for the old (but great) v510, finally, thank you.
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
techinv said:
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
Click to expand...
Click to collapse
Yep! The latest 88sleektweaks has voltage control table as well ( already adjusted down a bit to the settings I use). These can be changed here but be careful! TricksterMod is useful for making the initial changes to test as they won't get restored on boot. If you change them in the file and something goes wrong, you will have to remove the file using twrp.
sleekmason said:
Thank you! Let me know what you observe.
Click to expand...
Click to collapse
Just tried it with CM12 and it's a super V510 combo! Feels fast and smooth! Thanks for your XDA development & contribution.
UPDATED 2-12-15
Added Row IO Scheduler and Sound control - Change using trickster or in settings for row, and in trickster for sound control. Also added upstream fixes.
Is Row better than cfq? I think maybe it is . . . Battery will be the deciding factor for me. If anybody wants Row default for this kernel, let me know and I will implement it on next version. Regards,
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
galaxys said:
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
Click to expand...
Click to collapse
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
sleekmason said:
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
Click to expand...
Click to collapse
Not much difference maybe slightly faster but still analyzing with the new rom update...
BTW, did you see my post cm12 rom about GPS? Maybe you can take a look...
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
galaxys said:
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
Click to expand...
Click to collapse
Those who speak up get to choose! Row it is! Will update including row as default next compile.
Great kernel guide thread for those of us who like to mod & test settings in Sleek's Cool kernels!
http://forum.xda-developers.com/lg-...gn=Feed:+xda-developers/ShsH+(xda-developers)