Not sure why only SOME people have wifi issue.
I was using Xron vB1.3 for a while without any wifi issue. Since I update to vB2. Wifi drop off like crazy. Switch back to vB1.3 .. no help.
Today I did a ACMEUninstall and ACMEInstall CM73.5 from flesh. Wifi drop off still the main problem. Tried other wifi network in McDonald. Still the same. Flash it back to Xron vB1.3 ... wifi problem remain the same.
What I will do is ACMEUninstall it again and start with CM7 3.
Is that wifi is control by the config file /etc/wifi
Any recommendation is welcome .... ?
i only just put xron on my touchpad. but i put vb2 on and it wouldnt even connect to wifi at all. just got stuck on obtaining ip address. i uninstalled and reinstalled it with the same result. it wouldnt connect until i put b1 on it
I've tried all the tomorrow from 3.0 to vb2... They are giving me Wi-Fi connection problem..
Log on my router, channel is set to Auto and is using 11. I switch it to 7 and connection work fine. I test it for about an hour and got stable connection. Further testing with channel 1 in great success.
So it may still have trouble when trying to connect public hotspot.
happyta5 said:
Not sure why only SOME people have wifi issue.
I was using Xron vB1.3 for a while without any wifi issue. Since I update to vB2. Wifi drop off like crazy. Switch back to vB1.3 .. no help.
Today I did a ACMEUninstall and ACMEInstall CM73.5 from flesh. Wifi drop off still the main problem. Tried other wifi network in McDonald. Still the same. Flash it back to Xron vB1.3 ... wifi problem remain the same.
What I will do is ACMEUninstall it again and start with CM7 3.
Is that wifi is control by the config file /etc/wifi
Any recommendation is welcome .... ?
Click to expand...
Click to collapse
I don't now have the wifi problem.
I did have a looping problem a couple of versions ago, but fixed it by rebooting the router; another fix I've read about is setting the channel # to 4.
But erasing everything and starting fresh is a good idea also.......
happyta5 said:
Not sure why only SOME people have wifi issue.
I was using Xron vB1.3 for a while without any wifi issue. Since I update to vB2. Wifi drop off like crazy. Switch back to vB1.3 .. no help.
Today I did a ACMEUninstall and ACMEInstall CM73.5 from flesh. Wifi drop off still the main problem. Tried other wifi network in McDonald. Still the same. Flash it back to Xron vB1.3 ... wifi problem remain the same.
What I will do is ACMEUninstall it again and start with CM7 3.
Is that wifi is control by the config file /etc/wifi
Any recommendation is welcome .... ?
Click to expand...
Click to collapse
The same thing happened to me. I always thought it was the router until it happened to me. My wifi worked perfectly until B2, after that it would boot with wifi but would shut itself off after a little while. The wifi bars would stay blue but it would not connect without going into the wifi settings.
same here...very annoying not sure what to do...tried changing the wifi channel and reseting router, nogo.
I am in the same boat, just loaded android on it for the first time and used vb2. Tried all the fixes I could find, I am not even sure how I go about changing versions (roms) now so I guess I have some reading to do..
I am not running vB2 yet but I have been seeing that it might be a problem with your date and time. Make sure your date and time are correct.
Ron
I just went from 1.3 to b2 as well. I was also having no issues, then started having nothing but issues after the update.
I was able to fix mine after re-reading the OP for xron.
I booted back into CWM, cleared cache, wipe data / factory reset. After it booted when I was presented with the clock info I did not select auto (as I did the first time) changed the time zone, then changed the time by one minute. After that point I turned on wifi and connected to my router. Haven't had any wifi issues since.
Also, I did a titanium backup restored of missing apps only, no data. But, I am still having lots of fc issues, like with the xda app, when ever I try to sign in.
Sent from my Galaxy S II (i777)
quarlow said:
I just went from 1.3 to b2 as well. I was also having no issues, then started having nothing but issues after the update.
I was able to fix mine after re-reading the OP for xron.
I booted back into CWM, cleared cache, wipe data / factory reset. After it booted when I was presented with the clock info I did not select auto (as I did the first time) changed the time zone, then changed the time by one minute. After that point I turned on wifi and connected to my router. Haven't had any wifi issues since.
Also, I did a titanium backup restored of missing apps only, no data. But, I am still having lots of fc issues, like with the xda app, when ever I try to sign in.
Sent from my Galaxy S II (i777)
Click to expand...
Click to collapse
Thanks I gave this a shot but still no luck, getting connected....
did anyone test this in b2.2
---------- Post added at 06:48 PM ---------- Previous post was at 06:37 PM ----------
lol nvm i will, gimme a bit
---------- Post added at 07:32 PM ---------- Previous post was at 06:48 PM ----------
YES! wifi works like a charm without any modification
newbie with touchpad, just got it 2 days ago. tried it immediately with CM7 3.5 version wifi issues badly would not connect at all after google account setup.
swith to Xron vB 2.1 dec 14/17 releases connected successfully no drops but only if router channel 5 or less was selected. Flash today Xron vB 2.2 version,
wifi issues a thing of the past for me.Thanks leo....
3 routers at home.
Att uverse, Dlink N, Asus rt-n16 (tomato)
Wifi Channel
Humm ..
More sucessful when using lower channel no. 1-6.
This is the experiment I did....
- Got solid connection on channel 6.
- Manually switch my router to channel 11. Connection still fine and WiFi Manger report changed to 11. Browsing without any problem for a while.
- Reboot the TP. No connection, router not in range. Wait for about 5 mins. (Not doing anything on the TP) It connect ...
- Reboot .. connect is fine ..
Oh .. I'm using Xron vB2.2 at the moment...
Related
GTab running CM v7.0.3 Harmony.
WiFi just stopped working correctly out of nowhere. It'll go from "Scanning...", to "Connecting...", to "Disconnected", in an endless loop without ever actually connecting.
I tried just rebooting, and nothing. Tried even flashing back to stock (two different versions), then to the latest Nightly, then back to v7.0.3, then did a restore (just to get back to where I was), and all of them had the same issue. None of them had the ability to connect, and still with that same looping.
I even tried some program I found called "WeFi". No go with that either.
I've had this tablet since the 19th, working perfectly. On CyanogenMod7 the whole time. No major changes were made to the system.
Does anyone know of a fix or something that could get me back to functional WiFi?
I'd appreciate the help.
Thanks.
I realize this is not the correct section for this thread but id like to say yours is not an isolated issue. It happened to me with Vegan-Gingerbread edition and i flashed all the way back to Belkins 1.0 2638 (nvflash) and its still doing it.
Strangely enough, it works from my home but will NOT work at hotels airports etc (even though my my lap tops and phones etc will connect from those same locations. This has rendered my gtab nearly useless (without wifi its useless) even though i am familiar with nvflash and trying different roms..i have no idea why the wi-fi keeps looping into this "dead" behavior......
Delete...wrong thread. Lol
Strange, just recently I noticed the same thing, but mine tends to drop connection when using wireless tether via my phone. Even though wifi says connected any apps utilizing wifi will not connect. I have to shut off wifi & then turn it back on only to have it drop once more in less than 5 min. I know it's not the phones end because I can wifi tether to my laptop with no problems & I'm able to connect to my home wifi with no problems as well.
I'm running the latest nightly build of CM7 & have been using it since it was pushed out (June 25th I believe). No other ROM updates other than the usual app updates have been installed. This has been going on for about a week now.
No wifi on CM 7
Me too wi fi on the GTAB running CM7 died today. All other computers are connected.
miracle...now working.
Someone wrote me a PM and made a suggestion to delete user. I tried that, and removed my home network from the list. I also did a hard reset on my router.
The next day, it just worked. So who the hell knows. I'm glad in any case.
I've been having issues with wifi on my tab. I visit a friends house and it won't pick up the wifi. My phone picks it up fine, laptops pick it up ect. I stand AT the router and still it doesn't pick it up.
I thought it was a 1 off but it started happening at work too. The only differenceis that is WAS working fine at work, now won't pick it up. And now I have the same issue at my parents.
Does anyone else have this issue? Does anyone know a fix?
Cheers
Try wifi sleep policy and play with the options. Mine was set to "Never" and I was having random problems. Now set to "when screen turns off", and I never lose connection, screen on or off... On the other hand your problem may be different.
/reviveThread
Can't be sleep policy as it picks up other wireless networks fine.
I was just living with this issue until it lost my Home Wifi! Now thats gone I have to turn Hotspot on my phone, which I shouldn't have to do.
I thought it might be a problem with the ROM, so I've tried Task's GalaxyTask v5.0 and I still have the same issue. Might try flashing Stock and seeing if I get the same issue.
This is doing my head in now!
I flashed 3.2 Stock (rooted) and it picked up the missing Wifi connections. The rom is full of hebrew with silly boot and shutdown animations though. Tried flashing several custom 3.2 ROMS other than that and same issue as before.
Also, added connection manually and stood next to the Wifi antenna at work. Still got nothing. WTH is going on?
I read somewhere that Galaxy tab is not able to connect to some channels of wifi.
I believe it was not working with channels above 11
Try changing the channel and check
Thanks for the reply.
My home network is on channel 3. Plus it doesn't really explain how it can work 1 sec then totally disapear forever. Also doesn't explain how it works with the stock hebrew ROM but not with any others I've tried.
Just trying to find the wireless details for work now so I can change the channel anyway.
Then go with the Hebrew Rom and select English as language
Sent from my GT-P7510
ansonantonym said:
Then go with the Hebrew Rom and select English as language
Sent from my GT-P7510
Click to expand...
Click to collapse
I'd rather have no Wifi than see that nasty looking shutdown animation.
Anyway, problem seems to be semi resolved now.
Changed my wireless from channel 2 to 12, still didn't show. Back to 2, still didn't show. Changed it to 10 and it magically appeared.
Not sure what the work one is on. Still waiting for access.
The short of it is, my Wifi crapped out for reasons beyond my experiences thus far.
The long of it. I flashed epinter's 07/25/2012 Nightly and everything seemed to be working nicely, Wifi especially. Then today, out running errands and dropped my Atrix in my Car Dock and attempted to turn on Bluetooth for the first time since flashing, and the device froze then restarted. Once back up, I tried turning Wifi back on, and the device froze again and restarted. Thinking maybe the radio driver went south, I grabbed epinter's 07/27/2012 build (epinter-cm10-20120727_1846-UNOFFICIAL-olympus.zip), and still no luck. Back into Recovery, Wiping everything and also factory resetting then flashing twice over again, boot up, still no wifi, and if it manages to seemingly fire up, the device hangs and restarts.
Within the last 2 hours (Been at this for about 12 hours now.) I grabbed Jokersax's build (Beta 0.1.0), wiped/reset/flash twice as I have before. Now as I take a breath I noticed that the Wifi Icon came up in the Notification bar, but when I go into Settings and Scan, I see none of the Networks around me. I looked under Advanced and noticed that my MAC Address is 'Unavailable' nor am I showing an IP address, even though Wifi is saying 'On'. Verified on my Router, my Phone is not connected to it.
Odd Side note, installed aLogcat just to see if I could catch any errors, and it is not giving me anything, that is, I am not seeing any logs through the app. Most likely an unrelated issue, but still a tad annoying.
Everything else seems in order, including Mobile Data (Able to access Web Pages, Market/Play Store, receive email, etc.). Just Wifi pretty much 'Lights are on, but no one is Home.'. Any suggestions on next steps?
We discussed this issue over in some other threads and conclusion is that it's a hardware malfunction Ur broadcom chip is burned,many people (including me) had that problem.
Sent from my MB860 using xda app-developers app
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
try making a clean install and you'll se that you won't have that problem!
Stark5 said:
I need to really work on my searching, tried several variations of 'atrix WiFi cm10' and could not pin down a related thread.
But back on topic, CRAP! What I was hoping was not the case. Thanks for the reply, will continue to dig for those threads and cross fingers the chip really is not fried (doubtful but hey, people can dream right?).
Thank you for the reply.
Sent from Xoom running cm10
Click to expand...
Click to collapse
I can't search the threads right now as i am typing from my phone-search is limited to 20-30 posts... But keywords for ur search should be : "atrix wifi error" or "wifi and bluetooth error on atrix" Several forums have this kinda threads,not just xda unfortunately ... seems like it's very often malfunction on this lovely phone. I couldn't repair my previous atrix so i bought another one.
Sent from my MB860 using xda app-developers app
imarmand said:
try making a clean install and you'll se that you won't have that problem!
Click to expand...
Click to collapse
We're talking fastboot wipe kind of clean install? Going to give that a go as a last attempt, will post results here.
Glimmer of hope tonight, was discussing the problem with a friend, went to turn on WiFi and it actually scanned and connected for about 2 minutes before crapping out. This tells me there maybe life to the chip still. Now to get fastboot to connect and try a wipe and see what happens.
Sent from Xoom running cm10
Any news on this front? I am one of the afflicted as well.
I'm having a similar issue. though my BT works just fine, no delays, no errors, no intermittance.
Wifi, I can scan for networks just fine. i click on mine to connect. it shows connecting, noting that when it says connecting the signal shows 1 bar as compared to the full set of wifi bars when scanning, i am also right next to the AP. is tries connceting for about 20 seconds or so. then goes back to saying "saved" under the SSID, other networks showing "disabled" when this happens. i originally noticed this after flashing epinters cm10. i tried flashing 37p, 36p and 30p radios with no difference.
EDIT: also want to note that i HAVE disabled the "avoid poor connections" option. and have tried setting static IP.
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
johnmartin1981 said:
I flashed the same and I am unable to get my wifi to work after clean wipe, radio install or anything else that I have tried. Could software have really burned up a wifi radio????
Click to expand...
Click to collapse
Mine works occasionally so I don't think the radio is dead. The rom just acts like it's not there most of the time and doesn't give a mac address. Sometimes it works though after a reboot. Would flashing a different radio help? My baseband version says N_01.77.37P
I had an IP and a MAC, but no wifi internet.
Using mobile data, I downloaded Set DNS and then enabled wifi, works fine.
Now it's working but mobile data is going very very slow, it took 5min to download Set DNS.
I have a skyrocket but the "no wifi" issue is probably the same - your not getting DNS
I'm going back to CM9 for now.
+1 wifi matter under CM10
Try rebooting the router.
Experienced same issue (unable to connect, showing full bars, dropping to 1 bar when connecting and never being able to complete a connection) rebooting my router has fixed the issue. I'm not technical but it might have to do with the DNS release for addresses .. in any case unplugging my router for a bit and restarting it fixed the issue for me.
I updated to OTA jb 4.1.1 3-4 days ago
till yesterday, wifi was working normal but from today morning I see some weird problem.
When i try to connect my phone to my home's wifi, it gets connected. After that I open any internet based app, for the first time it works. then the internet stops.
I mean the wifi symbol is still there on the status bar but. it doesn't work.
I can't open any web pages, i have to turn wifi on-off to make it works, after loading one page it stops again.
But internet from the pc is working.
I tried restarting, keeping battery out for sometime, nothing happens.
What should i do?
Facing this problem first time in 5 months after updating to Jelly bean/
swapniltiwari said:
I updated to OTA jb 4.1.1 3-4 days ago
till yesterday, wifi was working normal but from today morning I see some weird problem.
When i try to connect my phone to my home's wifi, it gets connected. After that I open any internet based app, for the first time it works. then the internet stops.
I mean the wifi symbol is still there on the status bar but. it doesn't work.
I can't open any web pages, i have to turn wifi on-off to make it works, after loading one page it stops again.
But internet from the pc is working.
I tried restarting, keeping battery out for sometime, nothing happens.
What should i do?
Facing this problem first time in 5 months after updating to Jelly bean/
Click to expand...
Click to collapse
1) re-start ur home wifi router once and see
2) delete the exsisting home wifi netwrk on ur phone, reboot and let the wifi scan for the available netwrk on ur phone, then reconnect it back and see
Sun90 said:
1) re-start ur home wifi router once and see
2) delete the exsisting home wifi netwrk on ur phone, reboot and let the wifi scan for the available netwrk on ur phone, then reconnect it back and see
Click to expand...
Click to collapse
I have tried both the things already.
friendly bump
I have same problem as you have, like it took me sometime to finally figure it out. Try resetting your router. You see this small hole at the back of the router, hold & press it for about 20-30 seconds. Your router will now be restored to its factory settings, then connect your S3 & voila! your device is good to go.
I had the same problem at home once, I tried everything from wiping caches to reinstalling my rom. Turned out it was my router so yeah the guys above are probably correct.
Sent From My Omega'd Galaxy S3 ...
guys please help!
this sh*t is killing me >.<
i have tried and resetted my modem too, its no good!
xmrenegade7 said:
I had the same problem at home once, I tried everything from wiping caches to reinstalling my rom. Turned out it was my router so yeah the guys above are probably correct.
Sent From My Omega'd Galaxy S3 ...
Click to expand...
Click to collapse
Glad be of help..
swapniltiwari said:
guys please help!
this sh*t is killing me >.<
i have tried and resetted my modem too, its no good!
Click to expand...
Click to collapse
Did you ever try pressing the router hole for about 20-3- seconds? If it still didn't work, try manually input the your static IP. That worked too with me,
I don't have idea about static ip
And I've seen, while my screen is on. . WiFi remains connected and if I lock screen even for a second. .WiFi goes off
Sent from my GT-I9300 using xda app-developers app
Hi, Had same issue with WiFi, was doing my head in.
Problem for me was bad update from the OTA update,
go into recovery and factory reset wipe data, and cache, if still no luck then
your best solution which worked for me was download the full Samsung Official Firmware Stock from samfirmware (Google it)
and use odin to redo the phone.
Hope you get sorted. :good:
Go somewhere else with available WiFi, try connecting, if you succeed with no following issues, it's your WiFi router, if you can't connect to any other available WiFi, it's your phone, reflash ROM and test.
Have you tried turning power save mode off. In the dialer dial *#0011# then press menu button then WiFi then where it says on, turn it off. Be aware that it goes back on after every reset of your phone.
Sent From My Omega'd Galaxy S3 ...
---------- Post added at 05:49 PM ---------- Previous post was at 05:48 PM ----------
And as for it going off when your screen is off go to WiFi settings - advanced - and change the option about WiFi when screen off to always on.
Sent From My Omega'd Galaxy S3 ...
I have the exact issue. I tried everything here:
* Doing static ip on my phone
* *#0011# turning wifi power save mod to off
Still the issue. I didnt reset the router as my wife's s3 does not have and also this is issue is happening to other routers as well. Please help...
same issue
i have the same issue. I just bought a new S3 four days ago. Wifi of that stopped working exactly after 1 day of the purchase. Same symptoms , it worked at my home for a day and stopped on 2nd day. After stop and restart of the wifi, it again started but then after one page being opened, it again stopped. Tried "forgetting" the wifi uid , it didn't work. Stopped the wifi power saving mode, no gain. The version is stock JB 4.1.1 (came preinstalled) . On the other router, it did work but I am sure(though haven't confirmed) that it woudl stop after a day too.
After this issue, I changed my handset from the seller(original Samsung retail shop) and now, after 2 days, it again stopped today working, on almost the same time again. The same router is used by two ipods, two laptops and one HTC One X and it's working fine. I am not sure what to say to the seller now as he simply won't agree to me but the issue is clearly there. Any help please!
I too am having this problem after updating to 4.1.2. It helps to turn off the wifi then turn it back on, and but I don't want to keep having to do this.
Sent from my GT-I9300 using xda premium
Sounds like an ip related issue.. Your phone remains connected to the local network but can't find it way to the Internet (dns), right? . Try setting a static ip or soft reset the router every time it happens (turn it off and then back on). Try even locating the router somewhere it doesn't get too hot. These work for me
Sent from my GT-I9300 using xda premium
iliadis_babis said:
Sounds like an ip related issue.. Your phone remains connected to the local network but can't find it way to the Internet (dns), right? . Try setting a static ip or soft reset the router every time it happens (turn it off and then back on). Try even locating the router somewhere it doesn't get too hot. These work for me
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi,
But this issue never came up in the ICS and with the other devices , it's working fine. Also, can you guide how to set the static IP for the GS3?
Thanks and regards
---------- Post added at 04:09 AM ---------- Previous post was at 03:31 AM ----------
Okay, did a little Google search and found how to put static IP. Gave it now but still, no joy. Ironically, yesterday , after doing a lot of search I found that I should enable "dynamic routing" on the router. I did that and internet started. Worked for the night and today morning , it stopped and now not working at all.
Any help please!
Even I have this problem on my S3 LTE version on Jelly Bean 4.1.1. Trying hard reset and changing settings on router or fixed ip on phone won't be of any help. I tried all these and the problem comes back within no time. So don't waste time. Send the unit for repair or replacement. Think of it this way, if there is a problem with your router or other routers, your other devices would also have a similar problem so suggest not to tinker with router settings. Problem is with the phone. Whether there is a problem with hardware and/or software, it's Samsung's headache to deal with. Planning to send the phone for repair shortly. Fed up with Samsung. Previously had a problem with bluetooth and screen on S2 and now Wifi. Irritating.
Sent from my GT-I9305 using xda app-developers app
S3 Wifi problem solved
i have same issue regarding i connected my s3 with my home network but unable to acess internet . i also used static ip .but nothing gona work . i also used wifi power saving mode by dialing *#0011# but fail.Then I went to coutmer care center they reinstall my phone software and when i again connect to wifi router same problem.internet still not working on my s3 but its working on my labtop,tv..i also reset my router nothing
gona work.
Then guys.i simply change my ip adress of my router and internet is gona work on my s3..i changed to 192.168.1.2 to 192.168.1.5
Just change Your Router IP Adress
I know this has been discussed before, but after hours of searching last night on google, i have come to a standstill.
Has the wifi constant disconnect / reconnect been addressed.
Cheers.
re
looks like i will have to post my own reply.
I have reset the phone, and now it holds my wifi connections and does not disconnect.
Id suggest that if you have the same wifi disconnect and reconnect issues.. try a factory reset.
It connects fine, it just doesn't receive any data. I have tried flashing the stock modules. That didn't seem to help, I"ll keep trying hopefully when an decent AOSP rom appears i'll flash that and it'll correct the problem
Thanks
ManOfMyth said:
It connects fine, it just doesn't receive any data. I have tried flashing the stock modules. That didn't seem to help, I"ll keep trying hopefully when an decent AOSP rom appears i'll flash that and it'll correct the problem
Thanks
Click to expand...
Click to collapse
Is this with all wifi or just at your house, may be your equipment, does another phone have trouble connecting?
re
i just noticed last night something interesting, but not sure if it means anything to anybody else.
I have installed the chrome browser and have been using that for the last few days.
I connected to my home wifi and cruised around the web for an hour with no issues.
I decided to try the stock android browser and it would not load, like the wifi signal was gone.
i went back to my chrome browser and there was no issue loading new web pages.
I went back to my stock browser and reset it back to defaults and bamm it was working like the chrome browser with no hiccups.
Not saying this is a fix.. but it worked for me!
re
RLGL said:
Is this with all wifi or just at your house, may be your equipment, does another phone have trouble connecting?
Click to expand...
Click to collapse
i was having trouble at work and at home.
Tried every wifi/wpa setting/channel/encryption/speed etc.
i have 5 other wifi devices that have no issues.
But after resetting my phone and then running chrome / clearing , resetting my stock browser .. all is good in data land.
edit.. just tested out my work wifi with the stock browser for about 10 min.. not one issue.
I have had success forgetting the Wi-Fi network that is causing issue and then reconnecting.
Sent from my HTC6435LVW using xda app-developers app
^^ i too face the same problem