Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.
Related
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
Hi to all, I connected my GS 3 to Samsung Kies and found the LFB update.. I proceeded with the download which seems to be taking a lifetime, I am on a 50MB connection, the program itself took a few seconds to upgrade, the download of the firmware however is taking a lifetime! it would go to 2% and report an error, restart the download goes up to 3 or 5% and again reports an error, every time i redownload it increments by 1 to 2% and reports an error.
Anyone experiencing such issues with Kies?
Can I simply download the LFB firmware via SamMobile and flash it with Odin?
Thanks for the help..
edd080 said:
Hi to all, I connected my GS 3 to Samsung Kies and found the LFB update.. I proceeded with the download which seems to be taking a lifetime, I am on a 50MB connection, the program itself took a few seconds to upgrade, the download of the firmware however is taking a lifetime! it would go to 2% and report an error, restart the download goes up to 3 or 5% and again reports an error, every time i redownload it increments by 1 to 2% and reports an error.
Anyone experiencing such issues with Kies?
Can I simply download the LFB firmware via SamMobile and flash it with Odin?
Thanks for the help..
Click to expand...
Click to collapse
sorry mate can't help as mine worked fine.
I just followed the instructions and walked away from the phone until it restarted.
is your phone fully charged before you start the update? and are you updating via USB(I assume you are)
Phone was 88% and is now fully charged since the download started!!, Yep it is connected via USB..
edd080 said:
Hi to all, I connected my GS 3 to Samsung Kies and found the LFB update.. I proceeded with the download which seems to be taking a lifetime, I am on a 50MB connection, the program itself took a few seconds to upgrade, the download of the firmware however is taking a lifetime! it would go to 2% and report an error, restart the download goes up to 3 or 5% and again reports an error, every time i redownload it increments by 1 to 2% and reports an error.
Anyone experiencing such issues with Kies?
Can I simply download the LFB firmware via SamMobile and flash it with Odin?
Thanks for the help..
Click to expand...
Click to collapse
I had that too, do yourself a favour and uninstall Kies (except for the usb drivers).
Than download the rom you need from here http://www.sammobile.com/firmware/ ,
download Odin V3 3.0.4 and flash the rom with Odin. You don`t need Kies perse to update. Kies is a nightmare
gee2012 said:
I had that too, do yourself a favour and uninstall Kies (except for the usb drivers).
Than download the rom you need from here http://www.sammobile.com/firmware/ ,
download Odin V3 3.0.4 and flash the rom with Odin. You don`t need Kies perse to update. Kies is a nightmare
Click to expand...
Click to collapse
Ah ok so I can download the firmware and flash with odin.. thanks alot mate thats what i needed to know..:good: to hell with Kies... it really is useless ...
Thanks again..
Just make sure you follow Odin to the letter...... Don't tick any boxes that look as if they need ticking..... and make sure you drop the phone into Download mode before connecting otheriwse Odin won't find the phone.
Beards said:
Just make sure you follow Odin to the letter...... Don't tick any boxes that look as if they need ticking..... and make sure you drop the phone into Download mode before connecting otheriwse Odin won't find the phone.
Click to expand...
Click to collapse
Yep I am familiar with Odin, used the CF root twice 6.3 and 6.4 to root my GS3, wont tick any boxes for sure
:
edd080 said:
Ah ok so I can download the firmware and flash with odin.. thanks alot mate thats what i needed to know..:good: to hell with Kies... it really is useless ...
Thanks again..
Click to expand...
Click to collapse
Readup a bit, it isn`t hard but there are a few things you must know:
1. Enable usb debugging on your phone
2. Go into downloadmode (volume down + power + menu all at the same time)
3. See if IDCOM light up yellow and in the left bottom window it says added when you connect your phone to the pc.
4. Unzip the downloaded file ONCE into a .tar or md5 file
5. Place that file in the PDA section.
6. Do not tick anything, only f.reset.time and autoreboot should be ticked.
7. Start
Too late but maybe usefull for someone else
I installed Samsung Kies on my main PC, on one of my secondary SSDs. It prevented my entire PC from closing down, the processes could not be ended in task manager, and it bluescreened my PC when it started up. Had to uninstall it from safe mode in the end. However, on my laptop it worked fine... WTF? Giant POS.
Yep kies sucks, I'm using odin most of the times!
Sent from my GT-I9300 using xda premium
jaju123 said:
I installed Samsung Kies on my main PC, on one of my secondary SSDs. It prevented my entire PC from closing down, the processes could not be ended in task manager, and it bluescreened my PC when it started up. Had to uninstall it from safe mode in the end. However, on my laptop it worked fine... WTF? Giant POS.
Click to expand...
Click to collapse
If you`re using a windows pc you could install a programm called Revo uninstaller to uninstall software, it works fine for me and cleans all directories that windows doesn`t clean.
Managed to update my gs3 using odin, just had to reflash cf foot all seems ok ;-)
Sent from my Galaxy S3
edd080 said:
Managed to update my gs3 using odin, just had to reflash cf foot all seems ok ;-)
Sent from my Galaxy S3
Click to expand...
Click to collapse
Nice one Edd
Well done
Sent from my GT-I9300 using xda premium
Kies in short is a cancer.
Hey all.... Long time lurker and reader here. I usually find all my answers through previous posts but I'm a little stuck here and cannot find the appropriate guide to help me out.
I have a GT-P7510 which has always been rooted and has had a few ROM lifes, so I'm no stranger to CWM and download mode, Odin Etc... (But I'm certainly no expert by any means)
Last week I tried a flash and ended up bricked. (Soft brick) I tried several times to flash back to stock with the current as well as last known good firmware from SamFiles, but ODIN would fail partially through the flash. I got the message "Can't open the specified file. (Line: 1876)", so I checked here: http://forum.xda-developers.com/showthread.php?t=1370433 But that didn't help me.... And now, my tab is not recognized in any of the laptops or desktops I plug it into. (WinXP, WinVista, Win7 -- Kies drivers all fresh from Samsung)
I can get into Download mode. I can get into recovery, (I have done a wipe/re-format Factory reset in recovery a few times now) but nothing seems to help. I'd be willing to learn how to probe around with ADB, but haven't tried for lack of a driver being recognized. I have a few Linux boxes here at the house and haven't tried them. I wouldn't know where to start if the device was recognized by them.
Any suggestions on how to get the device recognized? Or, maybe what I can do from CWM (Sideload?). or even if I get an ADB connection from one of my linux boxes, would I be able to re-flash the firmware?
Thanks in advance.
first thing is to check your cable, then your pc drivers, if u can get in to cwm, try a new cable and mount the usb from there, put in a new rom, and flash it.
hope this helps, dude. Good luck.
If you foobarred the tab by a failed flash using Odin as you described logic would dictate that it has absolutely nothing too do with pc drivers suddenly not being good if they worked before, same for pc and cable.
You need to reinstall using Odin as you say you can get into download, using a .pit file, ticking repartition, and a stock firmware file. If that works you can go on to play another day....
If you're not sue about stuff you're using, good version of Odin (not all versions flash the 7510 properly) for 7510 and drivers are here http://forum.xda-developers.com/showthread.php?t=1518895
I'll put a .pit file up here when I get to a computer and get yourself a STOCK rom from samfirmware to flash thro Odin and you should be good to go
Sent from my GT-P7510 using XDA Premium HD app
stinky73 said:
If you foobarred the tab by a failed flash using Odin as you described logic would dictate that it has absolutely nothing too do with pc drivers suddenly not being good if they worked before, same for pc and cable.
You need to reinstall using Odin as you say you can get into download, using a .pit file, ticking repartition, and a stock firmware file. If that works you can go on to play another day....
If you're not sue about stuff you're using, good version of Odin (not all versions flash the 7510 properly) for 7510 and drivers are here http://forum.xda-developers.com/showthread.php?t=1518895
I'll put a .pit file up here when I get to a computer and get yourself a STOCK rom from samfirmware to flash thro Odin and you should be good to go
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
That sounds great man.... THANKS! I do have the correct Odin, and I have a clean firmware from SamFiles. But I have tried looking for a pit for the 7510 and haven't had much luck. If you could post one, I'd be forever in your debt.
Here y'are
stinky73 said:
Here y'are
Click to expand...
Click to collapse
Thank you brother! I'll report back in a day or so.
Good luck!
sent from my still superb Google I/O 7510
stinky73 said:
Good luck!
Click to expand...
Click to collapse
Back to the drawing board I guess... I have a new cable on-order. However I was able to get the driver loaded by utilizing the dreaded "Plug - Unplug" routine several times until I just got lucky.
Odin can see it as COM5, and I used your pit (Again, TY!) I tried using the "P7510XABLPL_P7510UELPL" file I got from Samsung, but Odin is locked up at this point. (See screen cap)
I'll keep beating my head against this wall
:silly:
Odin 1.85 is just about the most random version of the prog when it comes to the 7510...
Try the one I have posted below (v1.3) it has never let me down (whereas 1.85 often has done to me what it is doing to you)
Worth a try
stinky73 said:
Odin 1.85 is just about the most random version of the prog when it comes to the 7510...
Try the one I have posted below (v1.3) it has never let me down (whereas 1.85 often has done to me what it is doing to you)
Worth a try
Click to expand...
Click to collapse
Yes. Sorry I forgot to mention that.
I saw your other post and did grab that 1.3 version. However, When I get the drivers loaded (When windows "sees" the tablet after plugging and unplugging numerous times) It will show up as COM3 or COM5 in any version of odin Except 1.3.
I tried various versions of Odin and when they all see the com port, 1.3 does not. Truly bizarre to me.... With 1.85 and or 1.7 I was successful in just loading the pit file, but if I try to load a PDA, it just freezes.
I installed Android SDK and started playing with ADB yesterday. I haven't had much success in addressing the Tablet. Also, I cannot get into recovery any more. It appears that the tablet is stuck in download mode, as if it's in a loop. ('the device states that it's downloading even after a reboot with no cable attached.)
My new cables will be here in a couple of days. Until then, I'm letting the battery die completely and will try again with the new cables.
P-tek said:
Yes. Sorry I forgot to mention that.
I saw your other post and did grab that 1.3 version. However, When I get the drivers loaded (When windows "sees" the tablet after plugging and unplugging numerous times) It will show up as COM3 or COM5 in any version of odin Except 1.3.
I tried various versions of Odin and when they all see the com port, 1.3 does not. Truly bizarre to me.... With 1.85 and or 1.7 I was successful in just loading the pit file, but if I try to load a PDA, it just freezes.
I installed Android SDK and started playing with ADB yesterday. I haven't had much success in addressing the Tablet. Also, I cannot get into recovery any more. It appears that the tablet is stuck in download mode, as if it's in a loop. ('the device states that it's downloading even after a reboot with no cable attached.)
My new cables will be here in a couple of days. Until then, I'm letting the battery die completely and will try again with the new cables.
Click to expand...
Click to collapse
That's an odd one for the download reboot.... As normally you should get choice of recovery or download as first step... Would tend to signal a failed download
I've often seen people say here "have you tried a different computer?" and scoffed a bit at that but maybe in your case...
However to be scientific you should only change one variable at a time so as to know where the result comes from, so start with the cable and we can see where you go from there
sent from my still superb Google I/O 7510 (xda hd)
Victorious
stinky73 said:
That's an odd one for the download reboot.... As normally you should get choice of recovery or download as first step... Would tend to signal a failed download
I've often seen people say here "have you tried a different computer?" and scoffed a bit at that but maybe in your case...
However to be scientific you should only change one variable at a time so as to know where the result comes from, so start with the cable and we can see where you go from there
sent from my still superb Google I/O 7510 (xda hd)
Click to expand...
Click to collapse
Thank you again for all your help!
My new cables arrived and appeared to be at the center of the issue. Once plugged in, the drivers properly loaded and I was successful with Odin. I used the pit you gave me for a re-partition, and the UELPL PDA from Samfiles.
It was initially stuck in a boot loop after the successful flash, but I was able to reboot to recovery, F/R, wipe and clean it up and now it's ALIVE! :victory:
Yeeee. Haaaaah!!!!
sent from my still superb Google I/O 7510 (xda hd)
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
xdanewbie2014 said:
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Click to expand...
Click to collapse
As long as you can access download mode you should be able to get the device working again. I'd try heimdall (get suite 1.3 I believe) instead of Odin. It usually works better. You just need to find the Odin stock package for your device.
Sent from my YP-G1 using XDA Free mobile app
xdanewbie2014 said:
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
Click to expand...
Click to collapse
No you didn't break your device forever. All you have to do is install your stock rim that suites your device and flash it with hemidall
Sent from my YP-G70 using XDA Free mobile app
Hi
I have found all the files I need here
http://forum.xda-developers.com/showthread.php?t=1531850
BUT I cant get the device into download mode. I start the device with Powe+vold down+home key and it asks me to press vol up to continue. However, when I press vol up I get the "firmware upgrade encountered an issue" error.
Boy am i learning now
Thanks - xdanewbie
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
xdanewbie2014 said:
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Is This Progress ?
obscuresword said:
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Click to expand...
Click to collapse
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
Did you try getting the 4.2 drivers from Samsung Kies and then using zadig? Also it seems like you're using an S2 restore, which isn't for your device. The comment I linked you to is for restoring a YP-G1 so you would have to get the right heimdall package for your 4.2 like zaclimon said.
Sent from my YP-G1 using XDA Free mobile app
zaclimon said:
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
xdanewbie2014 said:
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
Click to expand...
Click to collapse
I think you are going to have to use Heimdall for this. Try and get the drivers installed for this device, and see if zadig picks it up.
Day 4
Hi
OK. It appears that I can either setup my PC to Use Heimdall (which requres the samsung KIES drivers NOT to be installed) or Odin (which requires the drivers to be installed)
I have now deinstalled the kies usb drivers, run drivecleanup to remove the old usb entries and downloaded Heimdall 1.3.1. When I run zdiag it picks up the samsung usb driver and install the heimdall driver.
Im trying now to use the rootted rom available (which seems ok for odin) available at
http://forum.xda-developers.com/showthread.php?t=1884071
However, if I try to use it with Heimdall 1.3.1 it says missing firmware.xml
I have a friends galaxy 4.2 also. Is there any way to extract the required info from that device or can anyone give pointers to where i might find a heimdall package for the YP-GI1CWXEU
Thanks - xdanewbie
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
drakonizer said:
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
Click to expand...
Click to collapse
Hi
Thanks for your help. I have the rom from the link above but where would i get the pit file from ?
Thanks - xdanewbie
Update: I found the PIT file for the international 4.2 version. I used odin 3.04 with the pit file followed by the rom and my device its now working again Is there any way now to get rid of the Salaxy S2 logo ?
Either way, many thanks to all who helped and I hope this thread helps those who were as silly as I was !
Thanks - xdanewbie
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
drakonizer said:
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
Click to expand...
Click to collapse
Hi I used this usb jig which not nly removed the yellow triangle but thegalaxy S2 logo as well. My player now looks exactly like it did before.
http://www.ebay.co.uk/itm/Micro-USB...UK_Mobiles_Accessories_RL&hash=item4ab688d076
PS: For those who may be interested, 4.2 case seem very expensive. I purchased this (whch is for a galaxy S2) and its a perfect fit but you need to
extended the button holes with a dremel.
http://www.ebay.co.uk/itm/Luxury-Ge...lePhonesCasesPouches&var=&hash=item48626b4b8c
Many thanks to all those who have helped a newbie learn a little bit more.
xdanewbie