I'm on MIUI, and just recently started using my phone has a music player with my headphones. The minimum volume on the phone is pretty damn loud, and most of the time I can't listen to it that loud. When I put the volume up it gets louder. I've tired just about every DSPManager setting I could find, nothing gets the volume any lower.
Is this just an issue with non-stock based roms? I know that the max volume issue is a non-stock issue (where the volume gets maxed at about 50% of the volume indicator).
It is a known issue for miui (I believe all miui) or cwm. I mpved out of miui because of that although I love it otherwise. Galnet miui also has the same issue.
Sent from my SAMSUNG-SGH-I777 using XDA App
Try out poweramp and its preamp gain setting on its built in equalizer.
penguinlogik said:
Try out poweramp and its preamp gain setting on its built in equalizer.
Click to expand...
Click to collapse
I just downloaded "equalizer" whats difference between poweramp?
I'm definitely looking for "better sound quality" and "loud + clear"
because I was experiencing volume Loss (auto dimm, yet volume still at max?) during calls (or just low volume), sometimes audio just seems Low during music playback vs my friends phone?? why a difference.
Edgarhighman said:
I just downloaded "equalizer" whats difference between poweramp?
I'm definitely looking for "better sound quality" and "loud + clear"
because I was experiencing volume Loss (auto dimm, yet volume still at max?) during calls (or just low volume), sometimes audio just seems Low during music playback vs my friends phone?? why a difference.
Click to expand...
Click to collapse
Your problem is different than the OP's and would normally deserve another thread...
Anyways, poweramp is just for music playback, and if you don't know how to use an equalizer properly, I would recommend not touching it or you would make it sound more like crap. The difference is how much power the audio jack can put out and the impedance of your headphones, and that determines how loud it sounds on your end. All phones are not the same, however, you should search for the in call audio fix thread for a solution to your problem.
Related
During music play, has anyone else noticed small amount of static when changing volume. This happens to me particularly when increasing the volume control. However, it is very inconsistent. When I say static, I mean there is a volume increase (or decrease) with some amount of "other" sound added in. This was not something I noticed with my ipod touch and was just curious if anyone else has this or it's a hardware or software issue.
Do you see when playing music through the speaker only, or with earphones as well?
Speaker is not clear enough to hear if there is any audible noise during volume increase or decrease. . . also hear it when using other music players such as cubed. Also, I was listening through my earphones to Avatar and even though the audio is very clear, when increasing and decreasing the volume I still hear what I guess is better described as a small pop instead of static. That might be a better description for the music noise as well.
Static, crackle, pop
I've been listening to audio books on my Vibrant lately and I've noticed this happening a lot. I've heard it through headphones and I have even heard popping / crackling on the speaker when it plays notification sounds.
Did this turn out to be a defect or is it an issue that everyone has occassionally but just ignores?
Thanks
Does this happen when using the on-screen volume control in the music app or only the rocker button?
Mine will actually crackle even when I'm not touching it.
Sent from my SGH-T959 using XDA App
Yes mine too. It will sporadically "skip" in all music players whether I'm using headphones or not.
Vibrant vibrating nicely now,Kthx!
Hello, did anyone find that the background noise of vibrant is very clear, when using headsets.
If you want to have a test, I think you can do as fellow.
1. Find a quiet environment, plug in your headsets
2. Open music player, turn the volume to 0
3. Play a song, you'll hear the background noise immediately
4. If stop the song, the background noise hold on for several seconds, then disappear.
What's the cause of this? Driver or hardware design? or just software.
So did anyone have some idear for solving this problem?
I have no background noise, try different head phones, maybe they are the problem.
I've heard it with iems in silence, same as what you described.
oka1 said:
I have no background noise, try different head phones, maybe they are the problem.
Click to expand...
Click to collapse
I use te headset comes from tmobile, factory headset.
Which headset are you using? and also rom and kernel.
I tested in several kernels and roms, all have this question.
It's what you get for listening to crappy MP3's use something better than MP3 preferably lossless
z0phi3l said:
It's what you get for listening to crappy MP3's use something better than MP3 preferably lossless
Click to expand...
Click to collapse
no, noise does not come from mp3. I use musicplayer just to take a example.
the noise comes when the dsp has outputs,and disappears when the dsp has no outputs
I am pretty sure you are hearing hardware static noise from the audio circuit. The sound quality of the headphone amp in the galaxy phones is better than most HTC phones, but sadly still falls short compared to an iPhone and many dedicated mp3 players. The static is even more evident with higher sensitivity headphones like the ultimate ears tripple-fis and the like.
Sent from my SGH-T959
Yeah I hear this also...if you don't hear it you're probably using cheap headphones.
I went from an iPhone 4 to the sgs 2. It seems to be giving me some audio distortion and static that wasn't there with my iPhone. Its most noticeable on the high end and with lower (128kbps) audio files. Any one else experiencing this or have suggestions on how to tweak things to make it better?
Only happens on Bluetooth a far as I can tell.
Sent from my SAMSUNG-SGH-I777 using XDA App
I found I needed to get a balance of the volume controls. I use a stereo bt headset, Motorola s305. It sounded best at about 2/3 volume on the phone, and crank up the headset. Also check out the eq settings if you are using the stock music player. I don't listen to much music, but listen to tons of audiobooks. When I do listen to music its usually Pandora, on the high quality setting, and it sounds great.
Sent from my SGS II
Hmm. I'll try the volume thing. Thanks.
Is there any way to 'lock' that volume max, so i don't accidentally switch that up?
I know there are apps on the market to increase volume levels, but I don't know of any to limit volume levels.
Sent from my SGS II
This is due to a low bitpool setting. There is no way to change this unless you flash CM7 or any AOSP ROM, which comes stock with a higher bitpool, thus better sounding bluetooth audio.
kletiz said:
This is due to a low bitpool setting. There is no way to change this unless you flash CM7 or any AOSP ROM, which comes stock with a higher bitpool, thus better sounding bluetooth audio.
Click to expand...
Click to collapse
just curious how this would affect BT earpieces but not car BT systems? I used my car's BT to make calls a lot and never had any audio issues.
I'm not opposed to flashing... Which would you suggest, CM7 or AOSP?
bfinleyui said:
I'm not opposed to flashing... Which would you suggest, CM7 or AOSP?
Click to expand...
Click to collapse
everyone has their own opinion. Try one and see if you like it.
Hi all,
I am having problem with Navigon/CoPilot GPS software where the voice volume is very soft. Especially if I am using the phone to play the music as well. It seems like both of this GPS uses the System volume which I've maxed out but it just seems too soft when compare to the media volume.
Sygic seems to work fine as it uses the media volume instead of the System volume. Just that I seems to prefer the routing provided by Navigon.
I've tried using Siyah kernel but it seems even worst due to the fact that Siyah allows you the amplify the media sound which makes the voice from the GPS almost inaudible. Is there anyone else that uses either Navigon or CoPilot that knows anyway or workaround to fix this?
One way I know is to lower the media volume and just turn up the car radio when using Aux input so that both the system volume and media volume are the same but the issue is that sometimes I forget about that and just turn back on to radio without lowering down the volume. Trust me, the sudden increase in volume is not really good for the heart and not to mention the ear.
Hope someone is able to provide me with a better workaround!
Thanks!
escaflo said:
Hi all,
I am having problem with Navigon/CoPilot GPS software where the voice volume is very soft. Especially if I am using the phone to play the music as well. It seems like both of this GPS uses the System volume which I've maxed out but it just seems too soft when compare to the media volume.
Sygic seems to work fine as it uses the media volume instead of the System volume. Just that I seems to prefer the routing provided by Navigon.
I've tried using Siyah kernel but it seems even worst due to the fact that Siyah allows you the amplify the media sound which makes the voice from the GPS almost inaudible. Is there anyone else that uses either Navigon or CoPilot that knows anyway or workaround to fix this?
One way I know is to lower the media volume and just turn up the car radio when using Aux input so that both the system volume and media volume are the same but the issue is that sometimes I forget about that and just turn back on to radio without lowering down the volume. Trust me, the sudden increase in volume is not really good for the heart and not to mention the ear.
Hope someone is able to provide me with a better workaround!
Thanks!
Click to expand...
Click to collapse
I use Siyah here and STweaks to amplify the Speaker volume.
The default value is 57, try to use 59 or 60 it can get pretty damn loud.
haranbh said:
I use Siyah here and STweaks to amplify the Speaker volume.
The default value is 57, try to use 59 or 60 it can get pretty damn loud.
Click to expand...
Click to collapse
Hi,
Thanks for that. But I am using it plugin to my car radio (aux in). This is so that I can listen to the music on my phone at the same time while the GPS is running. WIth the speaker volume, does that works if the output is not on the phone speaker itself?
escaflo said:
Hi,
Thanks for that. But I am using it plugin to my car radio (aux in). This is so that I can listen to the music on my phone at the same time while the GPS is running. WIth the speaker volume, does that works if the output is not on the phone speaker itself?
Click to expand...
Click to collapse
Speaker volume = Phone's speaker..
In your case, you need to increase the headset volume, also available in STweaks with the same values (57 default).
Does anybody else's navigation volume seem very low? Like obviously too quiet? I was at full volume and could not hear it very well over road noise. Any way to increase volume?
Update: just tried playing some spotify songs over speaker and it also seems quite low for full volume. Is there a way to test speaker output to make sure they are working how they should?
tbns said:
Does anybody else's navigation volume seem very low? Like obviously too quiet? I was at full volume and could not hear it very well over road noise. Any way to increase volume?
Update: just tried playing some spotify songs over speaker and it also seems quite low for full volume. Is there a way to test speaker output to make sure they are working how they should?
Click to expand...
Click to collapse
I have tried a few things. I noticed slacker Pandora and iheart radio were all loud while no matter what I couldn't get the navigation voice to ever increase to the same level as them. When I disabled beats I noticed they were closer in volume level. But still not effective. Voice should be higher. Maybe if someone can verify wether or not the navigation uses beats our not would be a start.
sent from my rooted DNA
S121Guy said:
I have tried a few things. I noticed slacker Pandora and iheart radio were all loud while no matter what I couldn't get the navigation voice to ever increase to the same level as them. When I disabled beats I noticed they were closer in volume level. But still not effective. Voice should be higher. Maybe if someone can verify wether or not the navigation uses beats our not would be a start.
sent from my rooted DNA
Click to expand...
Click to collapse
Interesting; I'll try turning off beats and see if that helps.