SIR,
I just rooted my SGA 2.3.4 DDKQ6 (INDIAN)... and installed clockworkmod 5.0.2.6 ..... with help from androidflip.com
i restarted my phone after doing a sd card partion by the above CW and it rebooted fine... then i used the clockwork app in my main menu to reboot in recovery mode...( as i thought of flashing the new cyanogenmod 7.2).....
i did a factory reset from here wiped cache pqartition and cleared dalvik cache...
i rebooted to check if everything is okay(i did not flashed anything).... AND NOW MY ACE is in REBOOT LOOP ...
''i read all available forums... did multiple factory reset and cleared cache and dalvik cache in each case but was of no use.....
i also tried to use my earlier NANDROID BACKUP which i just created before reset (i renamed the folder to ''Gingerbred ddkq6 22dec'').....but it said ---
checking MD5 sums....
MD5 mismatch!
plz help ..... i dont want to loose my phone
ambujpriyadarshi1991 said:
SIR,
I just rooted my SGA 2.3.4 DDKQ6 (INDIAN)... and installed clockworkmod 5.0.2.6 ..... with help from androidflip.com
i restarted my phone after doing a sd card partion by the above CW and it rebooted fine... then i used the clockwork app in my main menu to reboot in recovery mode...( as i thought of flashing the new cyanogenmod 7.2).....
i did a factory reset from here wiped cache pqartition and cleared dalvik cache...
i rebooted to check if everything is okay(i did not flashed anything).... AND NOW MY ACE is in REBOOT LOOP ...
''i read all available forums... did multiple factory reset and cleared cache and dalvik cache in each case but was of no use.....
i also tried to use my earlier NANDROID BACKUP which i just created before reset (i renamed the folder to ''Gingerbred ddkq6 22dec'').....but it said ---
checking MD5 sums....
MD5 mismatch!
plz help ..... i dont want to loose my phone
Click to expand...
Click to collapse
You renamed the backup , that's why it has a md5 mismatch .
Change the name back to the original one and you can restore .
CWM 5.0.2.6 is for CM7 , use CWM 4 instead .
EmoBoiix3 said:
You renamed the backup , that's why it has a md5 mismatch .
Change the name back to the original one and you can restore .
CWM 5.0.2.6 is for CM7 , use CWM 4 instead .
Click to expand...
Click to collapse
thanks for the suggestion....
but i dnt remember the exact name of the original nandroid backup.....
also how can i now move to cw 4????
ambujpriyadarshi1991 said:
thanks for the suggestion....
but i dnt remember the exact name of the original nandroid backup.....
also how can i now move to cw 4????
Click to expand...
Click to collapse
You're screwed if you can't remember the original backup name .
But you can try installing CM7 again , but mount /system and /data .
EmoBoiix3 said:
You're screwed if you can't remember the original backup name .
But you can try installing CM7 again , but mount /system and /data .
Click to expand...
Click to collapse
sir..
i dont want to give you much trouble.,.. but can u plz gimme the links for a better sound and safe flash this time. (cm7 kang cooper i have... in zip ... shall i use this with CW5 ''install from sd'' option) or plz suggest the right one....
ambujpriyadarshi1991 said:
sir..
i dont want to give you much trouble.,.. but can u plz gimme the links for a better sound and safe flash this time. (cm7 kang cooper i have... in zip ... shall i use this with CW5 ''install from sd'' option) or plz suggest the right one....
Click to expand...
Click to collapse
You can use that , just remember to mount /system and /data
EmoBoiix3 said:
You can use that , just remember to mount /system and /data
Click to expand...
Click to collapse
okay sir,,
i will try and get back to yuo... thanks for help..
ambujpriyadarshi1991 said:
okay sir,,
i will try and get back to yuo... thanks for help..
Click to expand...
Click to collapse
sir ...
i haven't flashed cyanogenmod till now... as i tried to explore what i have done and found one intresting thing...
after i partitione my sd card 512 mb by CW5 ... and did a factory reset the memory size of my 4 gb card still stucks at 3.1 gb....(after factory reset it should fall to original value).. i tried format on pc but it remained the same...
any link with the problem coz of this??? (i booted without sd and had no effect)...
also shall i mount /system and /data before installing the updates by CW5 ... (i respect you).. but i havent read this in any CW5 tutorial.9i dont mean disrespect here)...
shall i jump to a lower CW version ???? if so how??? and if not shall i flash the cyanogen 7.2 or better hand it to customer support????
m srry as m troubling you
ambujpriyadarshi1991 said:
sir ...
i haven't flashed cyanogenmod till now... as i tried to explore what i have done and found one intresting thing...
after i partitione my sd card 512 mb by CW5 ... and did a factory reset the memory size of my 4 gb card still stucks at 3.1 gb....(after factory reset it should fall to original value).. i tried format on pc but it remained the same...
any link with the problem coz of this??? (i booted without sd and had no effect)...
also shall i mount /system and /data before installing the updates by CW5 ... (i respect you).. but i havent read this in any CW5 tutorial.9i dont mean disrespect here)...
shall i jump to a lower CW version ???? if so how??? and if not shall i flash the cyanogen 7.2 or better hand it to customer support????
m srry as m troubling you
Click to expand...
Click to collapse
why the hell you people do partitioning stuffs and backups if you dont know how to fix it and what are they meant.......
your pc as i can tell have windows install will not recognize ext3/4 partitions on sd card thats reason why its still 3.1gigs... to get that there is some tool
secondly you have no choice than flashing your firmware or doing some advance stuffs to make md5 match with the backup
my suggestion would be flash the firmware with odin and for your information you will loose all apps and all contacts/sms .... this would be good lesson to you before doing something wrong and knowing nothing of
ambujpriyadarshi1991 said:
sir ...
i haven't flashed cyanogenmod till now... as i tried to explore what i have done and found one intresting thing...
after i partitione my sd card 512 mb by CW5 ... and did a factory reset the memory size of my 4 gb card still stucks at 3.1 gb....(after factory reset it should fall to original value).. i tried format on pc but it remained the same...
any link with the problem coz of this??? (i booted without sd and had no effect)...
also shall i mount /system and /data before installing the updates by CW5 ... (i respect you).. but i havent read this in any CW5 tutorial.9i dont mean disrespect here)...
shall i jump to a lower CW version ???? if so how??? and if not shall i flash the cyanogen 7.2 or better hand it to customer support????
m srry as m troubling you
Click to expand...
Click to collapse
THANKS THANKS THANKS THANKS !!!!!!!!!!!!!!!!!!!!!!!!!!
i flashed with cyanogen 7.2 i got my lovely ACE back to function... ..
so many thanks for boosting me too install it..... i would have gone for odin flash of 2.3.5..
it feels heavenly as my ace is working right now .... gotta check this rom now...... THANKS XDA....i came to know of many mistakes that i did and learnt from it...... and special thanks to u EmoBoiix3 ...
ambujpriyadarshi1991 said:
THANKS THANKS THANKS THANKS !!!!!!!!!!!!!!!!!!!!!!!!!!
i flashed with cyanogen 7.2 i got my lovely ACE back to function... ..
so many thanks for boosting me too install it..... i would have gone for odin flash of 2.3.5..
it feels heavenly as my ace is working right now .... gotta check this rom now...... THANKS XDA....i came to know of many mistakes that i did and learnt from it...... and special thanks to u EmoBoiix3 ...
Click to expand...
Click to collapse
Look,small advice,dont do things you dont know much about,right?
Right here,you just lost all your data because you tried to do things without doing a proper research.BTW,after you do a wipe,flash the rom,when you do a factory reset,your stock rom is gone,so your phone doesnt have anything to boot into...
Be carefule next time
Related
Hi after spending a huge time I finally did it and got into recovery and made backup.
Of also made a titanium backup.
Obviously my mem card has backup folders should I save them?
How I mean is there any particular way?
After the answer to above then comes the next problem.
I just need to download the zip file of the custom rom and then just flash directly.
then one more thing
assuming that now I'm in a custom firmware and wanna switch back to the default is it easy?
How do I do the custom recovery? Of the default obviously.:-D
Thanks in advance.
Sent from my LG-P500 using XDA App
Really guys everybody says this and that can someone give at least a proper that gives method to get back to original.
Sent from my LG-P500 using XDA App
Since ur done with recovery n backup,make sure u have the thunderg Custom recovery,clockwork isn't supported my majority of the roms u find here
Save the backup files from the sdcard to ur PC to be safe
Next just download a custom rom that suits ur need,copy it ur sdcard,boot into the recovery with the 3 button combo and just flash the zip from there
All instruction can be found in individual rom threads
Now,going back to the stock rom,its simple and easy
Just download the LG original firware and flash it with KDZ Updater
No warranty will be void so just chill play arnd with ur phone....
Thanks dude +1 for you.
Sent from my LG-P500 using XDA App
And what about the titanium backup? Any use to store it?
I mean I thought that I could go back to the same state using all these and I mean the exact state as now.
if I have to flash with a new rom even if its default only then what it the use of back up that I just did if I won't be using it at all.?
Sent from my LG-P500 using XDA App
divyanshu308 said:
Hi after spending a huge time I finally did it and got into recovery and made backup.
Of also made a titanium backup.
Obviously my mem card has backup folders should I save them?
How I mean is there any particular way?
After the answer to above then comes the next problem.
I just need to download the zip file of the custom rom and then just flash directly.
then one more thing
assuming that now I'm in a custom firmware and wanna switch back to the default is it easy?
How do I do the custom recovery? Of the default obviously.:-D
Thanks in advance.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
truely make a backup in recovery its worth mentioning which recovery u r using as thunderg 1.2.1 cannot restore so use 1.2 or lower-clockwork is better but it doesnt support installing all rom at this point of time but its better than thunderg.once u get support from all rom its worth installing clockwork.
now the main part
boot into recovery
make a backup of current rom and transfer it to pc
Wipe data/factory reset.
3. Wipe Cache.
4. Wipe sd-ext.
5. Format /system.
6.make partition swap 0 ,ext 512(convert ext 2 to ext 3 ,ext 3 to ext 4- class 4 sd card minimum required for ext4)
7.Select usb ms-toogle |copy the rom image to sd card
6. Intall zip from sd card.|Flash CM7.(if using cm7)
7. Reboot.
8. Done.
hope it was helpful.more tweaks and market zip is provided in differnt rom thread choose accordingly whatever u need.
ENJOY
if u get a bootloop just flash the zip file provided in mik rom for bootloop and then wipe again and flash the rom
AS FAR AS TITANIUM BACKUP IS CONCERNED ONCE U INSTALL THAT IN UR NEW ROM U GET TO RESTORE ALL APLLICATION U HAVE BACKUP EARLIER.JUST MAKE SURE U HAVE SAVED THE BACKUP FILE IN PC AND TRANSFER IT BACK AGAIN.AND IF U WANT TO GET BACK TO ORIGINAL JUST RESTORE THE BACKUP U CREATED EARLIER BEFORE FLASHING NEW ROM.
U CAN CHECK OUT THE THREAD IT MENTION A LOT OF THINGS ABOUT CLOCKWORK AND A2SD AND STUFF http://forum.xda-developers.com/showthread.php?t=1038338
shhbz said:
truely make a backup in recovery its worth mentioning which recovery u r using as thunderg 1.2.1 cannot restore so use 1.2 or lower-clockwork is better but it doesnt support installing all rom at this point of time but its better than thunderg.once u get support from all rom its worth installing clockwork.
now the main part
boot into recovery
make a backup of current rom and transfer it to pc
Wipe data/factory reset.
3. Wipe Cache.
4. Wipe sd-ext.
5. Format /system.
6.make partition swap 0 ,ext 512(convert ext 2 to ext 3 ,ext 3 to ext 4- class 4 sd card minimum required for ext4)
7.Select usb ms-toogle |copy the rom image to sd card
6. Intall zip from sd card.|Flash CM7.(if using cm7)
7. Reboot.
8. Done.
hope it was helpful.more tweaks and market zip is provided in differnt rom thread choose accordingly whatever u need.
ENJOY
if u get a bootloop just flash the zip file provided in mik rom for bootloop and then wipe again and flash the rom
AS FAR AS TITANIUM BACKUP IS CONCERNED ONCE U INSTALL THAT IN UR NEW ROM U GET TO RESTORE ALL APLLICATION U HAVE BACKUP EARLIER.JUST MAKE SURE U HAVE SAVED THE BACKUP FILE IN PC AND TRANSFER IT BACK AGAIN.AND IF U WANT TO GET BACK TO ORIGINAL JUST RESTORE THE BACKUP U CREATED EARLIER BEFORE FLASHING NEW ROM.
U CAN CHECK OUT THE THREAD IT MENTION A LOT OF THINGS ABOUT CLOCKWORK AND A2SD AND STUFF http://forum.xda-developers.com/showthread.php?t=1038338
Click to expand...
Click to collapse
i'm sorry to say as that as it did took a lot of time for me to finally got to recovery i cant remember which one i used.
I guess it was the one from android forums . com.
shhbz said:
truely make a backup in recovery its worth mentioning which recovery u r using as thunderg 1.2.1 cannot restore so use 1.2 or lower-clockwork is better but it doesnt support installing all rom at this point of time but its better than thunderg.once u get support from all rom its worth installing clockwork.
now the main part
boot into recovery
make a backup of current rom and transfer it to pc
Wipe data/factory reset.
3. Wipe Cache.
4. Wipe sd-ext.
5. Format /system.
6.make partition swap 0 ,ext 512(convert ext 2 to ext 3 ,ext 3 to ext 4- class 4 sd card minimum required for ext4)
7.Select usb ms-toogle |copy the rom image to sd card
6. Intall zip from sd card.|Flash CM7.(if using cm7)
7. Reboot.
8. Done.
hope it was helpful.more tweaks and market zip is provided in differnt rom thread choose accordingly whatever u need.
ENJOY
if u get a bootloop just flash the zip file provided in mik rom for bootloop and then wipe again and flash the rom
AS FAR AS TITANIUM BACKUP IS CONCERNED ONCE U INSTALL THAT IN UR NEW ROM U GET TO RESTORE ALL APLLICATION U HAVE BACKUP EARLIER.JUST MAKE SURE U HAVE SAVED THE BACKUP FILE IN PC AND TRANSFER IT BACK AGAIN.AND IF U WANT TO GET BACK TO ORIGINAL JUST RESTORE THE BACKUP U CREATED EARLIER BEFORE FLASHING NEW ROM.
U CAN CHECK OUT THE THREAD IT MENTION A LOT OF THINGS ABOUT CLOCKWORK AND A2SD AND STUFF http://forum.xda-developers.com/showthread.php?t=1038338
Click to expand...
Click to collapse
Can u tell me what is the difference between both the recovery? Why is clockwork worth it? And does it support CM7?
divyanshu308 said:
i'm sorry to say as that as it did took a lot of time for me to finally got to recovery i cant remember which one i used.
I guess it was the one from android forums . com.
Click to expand...
Click to collapse
just chk the file name u have in ur pc and u will come to know as 1.2.1 will land u in problem later
sweettaniyaa said:
Can u tell me what is the difference between both the recovery? Why is clockwork worth it? And does it support CM7?
Click to expand...
Click to collapse
thunderg recovery is the old preocess of flashing file which sometimes leads to bootloop or unsupportive to some tweaks and add on as it is unable to run the scrip porperly hence clockwork is considered better which handles everything smoothly as it the latest way of flashing zip and files.
But i would suggest to use thunderg as for now as all rom developed here are not suppoting clockwork so once it gets updated u can flash the clockworkmode and yeah finally it does support cm7.
i just hope that clockwork gets some updates like it is in hd2 forum solving some minor issue
Clockworkmod doesnt support many ROMs because the ROMs are using the old Amend scripts. Even google has stopped supporting Amend from Android 1.6.
If you want the old roms to work with clockworkmod, you can use the amed to edify tool to make it compatible with clockworkmod.
rforums said:
Clockworkmod doesnt support many ROMs because the ROMs are using the old Amend scripts. Even google has stopped supporting Amend from Android 1.6.
If you want the old roms to work with clockworkmod, you can use the amed to edify tool to make it compatible with clockworkmod.
Click to expand...
Click to collapse
So r u saying that all the new ROMS will be compatible with Clockworkmod?
just successfully installed custom recovery, can i now delete the img and flash_image from my sd root?, and also the zip file used in flashing new kernel can i delete that as well?
hi i used thunderg recovery 1.1.
i asked a question about how to recovery with 1.2.
basically when i follow the lin k with 1.2 it ends up with recovery image only.
there is no flash iamge attached with it.
so should i use the flash image of 1.1 to do recovery again.?
or what?
anybody here knows the answer ??
divyanshu308 said:
hi i used thunderg recovery 1.1.
i asked a question about how to recovery with 1.2.
basically when i follow the lin k with 1.2 it ends up with recovery image only.
there is no flash iamge attached with it.
so should i use the flash image of 1.1 to do recovery again.?
or what?
anybody here knows the answer ??
Click to expand...
Click to collapse
Yes.you need to use the same flash image file to install v1.2 or v1.2.1.
I suggest that you follow the instructions given in the following thread -
[HOWTO] Rooting, Installing -Android SDK, Custom Recovery, Custom ROM's
http://forum.xda-developers.com/showthread.php?t=1007244
divyanshu308 said:
hi i used thunderg recovery 1.1.
i asked a question about how to recovery with 1.2.
basically when i follow the lin k with 1.2 it ends up with recovery image only.
there is no flash iamge attached with it.
so should i use the flash image of 1.1 to do recovery again.?
or what?
anybody here knows the answer ??
Click to expand...
Click to collapse
just place 1.1 with 1.2 in ur sd card along with the same flash image
http://forum.xda-developers.com/showthread.php?t=1038338
this might help u to use adb properly
Thanks
Sent from my LG-P500 using XDA App
i currently have Megatron v1 rom in my p500
i installed the custom recovery thing and installed the rom and after that i flashed mik_os kernal..
phone is working great from some time now but now i m thinking of updating to franco's as megatron is pretty outdated now + i m getting a new memory card..
so i dont know from where to start ?
pls guide me ?
Hey,
1 : Dload Rom an Kernel .
2 : create backup !!
2.5 : reboot in recovery !!
3 : clear cache , all
4 : create partition as per req
5 : toggle usb
6 : copy rom an kernel , then flash from sd !!
If I missed anything , sorry :!
So i straightaway put in the new memory card and restart into custom recovery and follow the steps u mentioned ??
Some questions/doubts i have.
As i have partioned this current memory card... what files does it hold ?? (Hope i wont face any prob after removing this card)
And should i flash the rom first or the kernal ??
And in francos topic he has menrioned that data2sd thing is not stable yet ??
So what kind of problems are we talking about and is franco's kernal and rom stable altogether ??
I dont like my fone to be stuck after eveylry 5 mins or so .... pls reply...
Nd thanks in advance..
Sent from my LG-P500 using Tapatalk
Just put in the new card, reboot into recovery, create the ext partition (the card will be formatted afterwards), wipe everything Franco says in his first post, then toggle USB mode, connect to PC, paste the rom and kernel, exit USB mode, flash the rom, reboot. Then power off, enter custom recovery, flash the kernel, wipe caches, reboot.
Install SetCPU, set 729max - 480min with smartass and set it on boot.
Rest assured, Franco's devoid is a very stable build... you will really be amazed by your phone afterwards. If you want, afterwards you can install all sapps or just the essestial gapps (you can find links in the ROM thread - in the last 2-3 pages).
Thanks for the reply..
One ques remains abt data2sd thing (which is step 1 in his topic)
What steps shud i follow to install that ? Or is it already a part of the rom ?? If not where cn i dl it ? Is it gud ??
Nd i heard there is an altermative (apps2sd) ??
Which one do u recommend ?
Apps2sd is used in megatron rom rite ??
Sent from my LG-P500 using Tapatalk
Oh, sorry... I forgot about that!
Neither app2sd nor data2sd is included in the rom, but you can easily flash them in recovery. You will need to enable them afterwards (there's a market app and also a command for the terminal emulator).
Use Darktremor's app2sd, not ungaze's data2sd (since from what I've read, it's pretty buggy with Franco's ROM&kernel).
I don't know what is used in Megatron, but you can find out all you want about app2sd here: http://forum.xda-developers.com/showthread.php?t=670087.
Thanks a lot dude !
Sent from my LG-P500 using Tapatalk
Glad to be of help!
(you can also click the thanks button)
Happy flashing!
sholimar said:
Glad to be of help!
(you can also click the thanks button)
Happy flashing!
Click to expand...
Click to collapse
sorry i m new
done
hey one last thing
the link u gave to the app2sd topic
it says ***OUTDated*** right in the topic name
so just wanna ask should i install the latest version found here
or is that outdated version only compatible to our phones ??
I apologize, I was in a hurry and provided you with an old link...
The latest versions of Darktremor's app2sd are supported by Franco's rom, so install whichever you like from http://forum.xda-developers.com/showthread.php?t=926015.
Oh, and from what I've read, Franco also supports ext4 partitions (although I recommend having an SDHC 6 or above card).
ok
so here goes ?
1) Download rom kernal and app2sd image
2) boot in custom recovery (i have RA_thunderg-1.1.0-GNM)
3) Wipe everything (everything rite ?? all the options ?)
4) partition my new sd card (swap: 0, ext: 512, ext2-ext3, then ext3-ext4 it.)
5) Flash the app2sd image file (gonna flash the last stable build.. not latest beta)
6) after its completed straightaway flash franco.devoid rom file
7) after its completed i reboot < chk out the new rom for a moment
8) reboot into recovery again and then flash the kernal
9) Wipe cache (not sure how to do this ??)
10) install set cpu through the link u gave ?
and please afterwards how to make sure the app2sd is working as u said earlier i need to fill in a command or install an app ??
oh before wipe i will create a backup too
what kind of backup do u recommend ?? as there are 5-6 options i guess ??
and should i wipe before or after partioning my sd card ?
Gagan91 said:
oh before wipe i will create a backup too
what kind of backup do u recommend ?? as there are 5-6 options i guess ??
and should i wipe before or after partioning my sd card ?
Click to expand...
Click to collapse
I think there is only one option for backup, that's nandroid backup.
Which is there in CWM.
Sent from my LG-P500 using XDA Premium App
It aso shows options like nand backup, nand+android secure, nand + ext
and then at last they say google something..
So pls suggest ?
Sent from my LG-P500 using Tapatalk
You have amon RA, so a simple nand backup will be fine. And after that you can wipe, then partition. I installed DT apps2sd (the beta 4) after flashing the ROM and kernel and it works great. So I guess it's fine.
Lets say I don't want to flash any app2sd or d2sd on my phone and I want only the native a2sd which comes with the ROM. Do I need to create any partitions? Or can I simply skip that step?
sweettaniyaa said:
Lets say I don't want to flash any app2sd or d2sd on my phone and I want only the native a2sd which comes with the ROM. Do I need to create any partitions? Or can I simply skip that step?
Click to expand...
Click to collapse
No, you don't have to create any partitions in that case.
I have download the file (25/5/12) in sd card.I need to flash CWM but not sure
wipe cache/date,factory reset. Do I install from sd or update from sd card?? Which one is correct. I newbie, please help me...... This is 1st Rom I liked so much.
Thanks guys.
sabah98 said:
I have download the file (25/5/12) in sd card.I need to flash CWM but not sure
wipe cache/date,factory reset. Do I install from sd or update from sd card?? Which one is correct. I newbie, please help me...... This is 1st Rom I liked so much.
Thanks guys.
Click to expand...
Click to collapse
Do factory reset and wipe cache...
then select install zip from sd card and select the zip file of the ROM..
Cheers
Isn't he is trying to install the update of the ROM only? 0.o
I had used LeWa before, just flash it using CWM...
Sent from my WAREZ impulses.
Hello There,
Yeah you right! I want to upgrade the rom so should I need to wipe anything. And what will be the command: install or update from sd card. I hv already installed the old version dated 4/5/12. Thanks to both of you.
sabah98 said:
Hello There,
Yeah you right! I want to upgrade the rom so should I need to wipe anything. And what will be the command: install or update from sd card. I hv already installed the old version dated 4/5/12. Thanks to both of you.
Click to expand...
Click to collapse
Just flash it using CWM
Respecting others never hurt, let's build a better XDA community.
sabah98 said:
Hello There,
Yeah you right! I want to upgrade the rom so should I need to wipe anything. And what will be the command: install or update from sd card. I hv already installed the old version dated 4/5/12. Thanks to both of you.
Click to expand...
Click to collapse
Use install, don't use the update option. There's no need to do a wipe if your just updating.
Sent from my GT-S5830 using my hands
@yeowwwai/tomb20
I done what you told me. But the installation aborted with this message: apply_patch_check("system/bin/debugged") Error in /sdcard/LeWa_OTA_Cooper_12.05.18_12.05.25...fc532.zip (Status 7) What does this mean? How should I correct it?? I have not change the settings except the language English. Installed Link2Sd and Market + games. Please advise me what are the steps?? Thanks again.
sabah98 said:
@yeowwwai/tomb20
I done what you told me. But the installation aborted with this message: apply_patch_check("system/bin/debugged") Error in /sdcard/LeWa_OTA_Cooper_12.05.18_12.05.25...fc532.zip (Status 7) What does this mean? How should I correct it?? I have not change the settings except the language English. Installed Link2Sd and Market + games. Please advise me what are the steps?? Thanks again.
Click to expand...
Click to collapse
Which version of CWM are you using?
Respecting others never hurt, let's build a better XDA community.
@yeowwwai
CWM 5.0.2.6 I hv installed the Lewa Rom(old version) and everything works fine. Another way is I flash the latest rom but I lose Link2Sd partition and all data. What should I do?? Or I stay on the old version?
sabah98 said:
@yeowwwai
CWM 5.0.2.6 I hv installed the Lewa Rom(old version) and everything works fine. Another way is I flash the latest rom but I lose Link2Sd partition and all data. What should I do?? Or I stay on the old version?
Click to expand...
Click to collapse
You need 5.0.2.8 LeWa version of CWM in order to install updates...
Hello there!
I hv searched few hrs on CWM5.0.2.8 Lewa but couldn't find it. Can you port it over here for users having this Lewa Rom who also need this. Your help goes a long way.
Hei There!
I solved the problem. I flashed the latest rom after wiping cache/data. I still cant find the CWM5.0.2.8 even I searched the chinese website:115.com/file/ane69mcp they stated it as cm_zip
Hi.. I am unable to update below update on lewa ROM .. The last updated patch is 12 _05_25
LeWa_OTA_Cooper_12.05.25-12.06.01_7a5ab.zip
I have latest CWM... get message update aborted
Thanks...
yeowwwai said:
You need 5.0.2.8 LeWa version of CWM in order to install updates...
Click to expand...
Click to collapse
It's not true, now you can update with ota also with cwm 5.0.2.6. The problem is link2sd: if you want ota updates you must use native a2sd (moving app to sd in settings) and also you can't modify any system file, like gps.conf and any others
Inviato dal mio GT-S5830 con Tapatalk 2
BUMP!!!
me too! I have been able to update prior to the last update. But now, I can't. I've read in some post that you should delete the .Zip that contains 0 bytes. Yet again its not the solution. The error is: "E:Error in /sdcard/LEWA/ota/download/LeWa_OTA_Cooper_12.05.25-12.06.01_71a5ab.zip(Status 7)"
P.S. I dont want to flash the whole rom. I just want the update. Please help.
Uninstall Link2sd and do not alter any settings. Download OTA from first page flash it with CWM. No need to wipe. It works for me. Hope this help you.
hi guys.. i have a big issue with my razr when i try to use cyanogenmod ( the official one obviously)
the problem is quite simple..i use safestrap to install the custom rom in rom slot1, i flash the rom and gapps, i wipe cache/dalvik cache ( so i do everything that should be done) but when i try to use google now (in particular the voice search) google search close down and it doesn't worked...this happened even when i was on official 4.0.4 and even now that i'm on 4.1.2....i have noticed that in the stock rom if i get "motorola service" unistalled, google voice doesn't work anymore... ( and even in this case with the stock rom i'm the only one who has this problem)
but with cyanogenmod 10.1 ,which is a modified rom installed in a different partition i really can't understand why it doesn't work to me!! ( i've already asked in other italian's forums if someone else had the same problem, but i'm still the only one..)
how can i solve it?
p.s. sorry for my imperfect english :crying:
ok guys, problem solved by myself updating the app/ reinstalling it
i have another question...is there any possibility to have only cyanogenmod on the device instead of dual boot with safestrap? or is it impossible? :silly: (stupid locked bootloader :crying: )
Dallo28 said:
ok guys, problem solved by myself updating the app/ reinstalling it
i have another question...is there any possibility to have only cyanogenmod on the device instead of dual boot with safestrap? or is it impossible? :silly: (stupid locked bootloader :crying: )
Click to expand...
Click to collapse
yes u can do it.:good: but it is impossible with safestrap installed
install bootmenu manager and wipe your system 1. then flash cm10.1 to the system 1 and there u have it. only one rom running on your phone
DISCLAIMER: Could be potentially harmful incase cm 10.1 does not boot up properly on bootmenu or if u mess up in the process
Gautam Padirooted said:
yes u can do it.:good: but it is impossible with safestrap installed
install bootmenu manager and wipe your system 1. then flash cm10.1 to the system 1 and there u have it. only one rom running on your phone
DISCLAIMER: Could be potentially harmful incase cm 10.1 does not boot up properly on bootmenu or if u mess up in the process
Click to expand...
Click to collapse
done it this afternoon :good: at the first restart i have had to fight a lot with my phone to boot properly, but with rc2 it works very fine! and i also have more free space in rom partition :good: and obviously in data partition because of less bloatware..
i have another small question about bmm, maybe you can help me...before doing what i have just said , i installed cyanogenmod in system 2, then i have format the partition ,wiped everything and so on...i want to ask if after this format all the space in system 2 has been released
(sorry for my mechanical and uncorrect way of writing..when there are too many verbs my mind explodes :silly: )
edit : to work it without any problems, is important to wait before restart and to select "install bmm to main menu" in advanced settings
Dallo28 said:
done it this afternoon :good: at the first restart i have had to fight a lot with my phone to boot properly, but with rc2 it works very fine! and i also have more free space in rom partition :good: and obviously in data partition because of less bloatware..
i have another small question about bmm, maybe you can help me...before doing what i have just said , i installed cyanogenmod in system 2, then i have format the partition ,wiped everything and so on...i want to ask if after this format all the space in system 2 has been released
(sorry for my mechanical and uncorrect way of writing..when there are too many verbs my mind explodes :silly: )
edit : to work it without any problems, is important to wait before restart and to select "install bmm to main menu" in advanced settings
Click to expand...
Click to collapse
u better not mess around with the processes happening in bmm ( install bmm to main nemu) accept it if it asks
actually deleting system 2 does not release any space. that space was withheld by motorola for the webtop partition on EVERY phone
now that we dont use that space , it is used as a place to test roms on our phones AKA system 2
on the other hand safestrap does not use this and utilizes the internal sd partition to install roms
hit like if i helped!
Gautam Padirooted said:
u better not mess around with the processes happening in bmm ( install bmm to main nemu) accept it if it asks
Click to expand...
Click to collapse
ok for system 2..understood :good:
but for bmm , after deleting all system 1 and flashing a custom rom, i think that if you do not install bmm to main system, the phone won't boot up due to locked bootloader :good:
Dallo28 said:
ok for system 2..understood :good:
but for bmm , after deleting all system 1 and flashing a custom rom, i think that if you do not install bmm to main system, the phone won't boot up due to locked bootloader :good:
Click to expand...
Click to collapse
yep. u should install bmm to your main system
Gautam Padirooted said:
yep. u should install bmm to your main system
Click to expand...
Click to collapse
it's what i've done :laugh: i just wrote because someone may need to know it :good:
first time i install cm10.1 nightly on s2 i9100, there was no prob...then flashed pacman rom ..was a little glitchy and slow.
So moved on to paranoid android..this is where the prob started... it keeps on bootlooping :?
Right now flashed stock 4.1.2 via odin and rooted with siyah kernel s2 v6 0.5b ..works fine
but if i flash any custom ROM it bootloops ,even with the prior cm10.1 that i had..
checked xda , did a lot of work but still stuck at square one..{wiping this , wiping that}
only thing i can find fault with is in recovery when wiping data says
Format/sdcard/.android_secure ..fail
skip Format
Format completed
when trying to intsall from sdcard it says
E:/ cannot mount..
tried different cwm recovery .. all with the same findings..
so please help me.. its boring to be stuck with stock ROM..
i am a doctor ..i tried but couldnt follow running SDK and commands ..so please keep it simple
or if possible publish a video.. bcause iam not the only one with this predicament...during my research i found a lot android users with the same problems..
Thanks
hi ..you should find your answer herehttp://forum.xda-developers.com/showthread.php?t=1108499
maybe you have apps on your SD card so thats whats causing the issue
ammar1514 said:
hi ..you should find your answer herehttp://forum.xda-developers.com/showthread.php?t=1108499
maybe you have apps on your SD card so thats whats causing the issue
Click to expand...
Click to collapse
Thank you..ammar but as i have already said my phone works but with the stock rom...i end up bootlooping only when iinstall custom ROM
n the solution given in that thread 1. is to flash a stock rom.. 2. flashing villain rom but the download links are not working..
i think it has do with fail to format .androidsecure thing but what do i know?
again thanx..
check this http://forum.xda-developers.com/showthread.php?t=1906362
also backup all ur internal memory data to a pc and then format your Internal memory from within the rom
You could try using a couple of wipe scripts by a guy called hawkerpaul....I think they're called 'romwipe' and 'kernelwipe'.......
Use the XDA search function....should be easy enough to find.
It may be that there are some 'leftovers' following the usual wipes (cache, dalvik and data) that are causing conflicts with your fresh installs.....
The above mentioned scripts perform a more in depth wipe....might help.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
keithross39 said:
You could try using a couple of wipe scripts by a guy called hawkerpaul....I think they're called 'romwipe' and 'kernelwipe'.......
Use the XDA search function....should be easy enough to find.
It may be that there are some 'leftovers' following the usual wipes (cache, dalvik and data) that are causing conflicts with your fresh installs.....
The above mentioned scripts perform a more in depth wipe....might help.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
i have tried that GS2ROM wipe and nuke scripts already, with no luck ... yes that runs bigger wipe but it still fail to format sdcard .andoidsecure
i think it has do with renaming of the sdcard{silly doubt when recovery states sdcard , it doesnt refer to extsd right?} from sdcard to sdcard0 while installing CM10.1,,
if i could safely erase that {.andoidsecure}, probably things will back to normal .. anyone know how to
oh iam not able to use install from sdcard option in recovery(formerly before flashing any ROM i was able to..i hav to install from "internal memory"
Again iam grabbin at random bcause i want to go bac to custom ROMs. .if any of sounds untechi ..let me remind u i am just , what do they call it.. a noob and i do apologise...
ammar1514 said:
check this http://forum.xda-developers.com/showthread.php?t=1906362
also backup all ur internal memory data to a pc and then format your Internal memory from within the rom
Click to expand...
Click to collapse
i can find folder .androidsecure in extsd card and that erasing that doesnt solve the problem.. there must be another copy
iam not able to find .androidsecure in sdcard {internal}..with neither ES explorer nor Root explorer..
i dont know if this helps but i tried to intall that int2ext mod once but it didnt take ..installation aborted in recovery..i cant really remember if this was before or after i started havin the bootloop problem...Most likely after ...when i was running stock rom
There those are all the cards ...someone please solve the puzzle...
hey i can install custom roms again
1.formatted extsd and usb storage{after making back up of course} in storage setting in ROM
2.in recovery : Mount emmc
Mount sdcard
wipe user data
Flash the custom ROM
and it didnt go into bootloop ...hurrah
Running CM10.1 on i9100...
thanks guys..
looking into dual boot with siyah...are cm10.1 and PA rom compatible? jumping the gun too soon..lol..