okay so i have finaly topped up my tg01 and got my free texts and web.
3g works perfectly !!!!!
if anyonne ca help me how do i get my sms to work?
theye recieve to my tg01 perfect and fast but sending out i get cannot send message of something.
anny tips ?
it seems that i can send 1 sms fine but then if i try send another one in the same thread it wont. ay ideas?
also, i would like to test out navigation so has anyone got any ideas for good apps like nokia drive, or something like that and where to get it
jonnyhall1bmx1 said:
it seems that i can send 1 sms fine but then if i try send another one in the same thread it wont. ay ideas?
also, i would like to test out navigation so has anyone got any ideas for good apps like nokia drive, or something like that and where to get it
Click to expand...
Click to collapse
If you got the contact saved in phonebook, then you can create new SMS to that contact and it will be send.
It's because you send SMS first without prefix, then receive SMS with prefix and the number in thread gets overwritten from nonprefix to prefix.
If you have prefix in sms center number in settings, remove it.
thank you for your reply yeah i thought that myself when the first one sent then the next one didnt i thought i wonder if its adding the prefix back on with the next message thanks for your reply i will remove the prefix in the centre number. i was in 2 minds as to do that but now i have a second opinion i will try it thanks bro for your reply
Jonny,
I had the same problem as you with this ROM (on Virgin) and nothing I did would make SMS's send - either new, or replies.
I have now installed Aeroflyluby's VDG Mango 8107 and with that ROM, sometimes I can send SMS - but it is not consistent AND GPS works on that ROM (it doesn't work for me on Miro's ROM).
HOWEVER, on VDG Mango 8107, I find it impossible to set the SMS Message Centre - when I fill in the number and hit "save" as the phone either hangs or the Message Centre number remains blank. On this ROM, I have also tried using the HTC Connection setup (which works fine on Miro's ROM's) but it complains that it's database is empty.
So, here is a very long shot. Check out HKEY_CURRENT_USER\ControlPanel\Phone\CallIDMatch - which should be a dword. I think that you might find in Miro's ROM it is set to 7, but for the UK we need it set to 10 (to match the last 10 digits of a mobile or landline number).
On the VDG Mango 8107 ROM, this key doesn't exist - and I don't have permissions to create it - but if it is already there, you should be OK to change it.
Good luck!
thanks for your reply im not sure about fiddling with the registry. back in wm6.5 i was always making a mess of the registry but, i must admit i made some really good tweaks with editing the registry, but, in wp7 id rather leave it up to the experts on that one as i have never owned a wp7 phone before so im not sure how things will react.
thanks for your input tho , much appreciated
Related
My Siemens SX56 won't give me SMS Sent Message Confirmation even if I tick the box that requests for it.
How do I do it guys???
What you need to do is this...
Start writing a message, and then choose Edit > Edit My Text Messages. Next, choose one of the messages you won't use (I choose the last one for ease of use and the fact I'd never say "I love my Pocket PC!" to anyone) and edit it to show
*0#
exactly as typed. Asterisk number 0 and hash key / pound sign. Save it and then the next time you type a message, put this in the Subject field of your message. The bad news is that it takes up 3 chars in your 160 max per message, but the good news is that once the message is delivered or pending etc, you get a message telling you. The tickbox in the sms options doesn't seem to work whenever I've tried it (why is it there? - does this work on non o2 providers, out of interest?) but the *0# definitely does.
Hope this helps.
Anthony
the tick box option seems to work fine for me on orange, i know that trying to use delivery reports on nokias with o2 dosent work either! i think its just some o2 thing
Yeah now you say that I remember myself. It was a friend on o2 (who didn't have an XDA type phone) who told me about using the *0# in the first place.
Wonder why they can't set it up as all other networks seem to and it's a very useful feature when it works properly.
Anthony
hey thanks
just posting to thank you for providing this answer.
I've long wondered why ticking the checkbox did nothing but hadn't realised there was a way round it.
that's cool, xda-developers never lets you down
Hi there,
This software is an Antitheft and you can use it to track your device when it was lost or stolen. It works catching a formated SMS sent from any phone and then send useful informations back.
You can use it to others objectives, like keep your eye in your child. Use your imagination!
If the thief change your SIM card, you will receive a SMS alerting you and you still can track your device. All you need to do is set an emergency cel number.
RemoteTracker can be added to third part custom ROMs. But, with a hard reset all configurations was lost. Now, RTRegCreate tool can create a configuration file using your PC. ROM cookers can use this DLL to make RT hard reset safe!
I need to learn VisualStudio 2008 and develop to Windows Mobile for professional purposes. I choose to make this projet because thought it might be fun
My Glofish X800 has Panot (from eten-users.eu) custom ROM with WM6.1 and native .NET 3.5, but you can download this .NET version if needed here: http://www.microsoft.com/Downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
The installer CAB file and source code of RemoteTracker can be downloaded here:
http://remotetracker.sourceforge.net
This version answer the commands below:
rt#help - send this list of commands;
rt#ehelp - send this list of commands by e-mail;
rt#cb#<some_tel_number> - turn on the Phone and call the number passed as parameter;
rt#gp#<some_cel_number> - try to get GPS coordinates and send back to cel number passed as parameter.
rt#egp#<some_e-mail_account> - try to get GPS coordinates and send back to e-mail passed as parameter.
rt#pb#<some_cel_number> - Use them to receive your contacts stored in SIM card back. If you do not take the phone back, at least the contacts will be saved.
rt#epb#<some_e-mail_account> - Same as pb, but the message goes by e-mail.
rt#elt#<some_e-mail_account> - This command will start GPS, Log the path about 5-6 minutes and send the KMZ file by e-mail. This file can be opened with Google Earth. Very cool.
rt#go#<some_cel_number> - get 'settings/owner' informations.
rt#ego#<some_e-mail_account> - Same as go, but the message goes by e-mail.
rt#rst - softreset device.
rt#dkz - delete all kmz files.
rt#dsc - delete all contacts in SIM card.
rt#eganfl - Send, by e-mail, a list of all incoming and outgoing calls if you have VITO audio notes installed.
rt#eganf - Send, by e-mail, all incoming and outgoing calls records if you have VITO audio notes installed.
rt#findme - Same as 'gp' command, but ask you if you want to answer the command.
rt#alarm - Just play a sound. Useful when you don't remember where the device is, but you know it's your home.
rt#gi - Send informations about your phone: IMSI and IMEI.
rt#egi - Same as 'gi' but the answer goes by e-mail.
rt#msg - Send a message to be displayed on your device.
The main screen has a tab with help.
I did this project to be multi-language. In this version there is Portuguese (my mother language), English (sorry about it, my english is very bad), Dutch (thanks to Cybermoose, from etenusers) and Spanish (thanks to Popy from etenusers). If you want to make your own translate, I can tell how. Very simple.
If you decide to try RemoteTracker, I would like to read reviews, comments and suggestions. Remember this is a beta version and may contain bugs. Use at your own risk and with caution.
Please see ChangeLog.txt to see the improvements.
For those of you who are having the problem with the help file,
with some strange certificate errors and PIE opening when you start RTconfig, the problem lies with having the default program that opens html set to something besides PIE (Opera 9.5, perhaps)
To fix this, use schap's Advanced Config tool to set .htm and .html files to be opened by:
Code: iexplore.exe file: %1
Originally Posted by xd1936. Thank you very much!!!
Keep RemoteTracker up to date!
There is an integration with AppToDate. This application verify if configured softwares are up to date or not. If not, you are alerted, and invited to download the new version! Very cool and useful.
You can download AppToDate here: http://www.modaco.com/content/apptodate/267096/download-apptodate-supported-applications/
After install AppToDate, please download RemoteTracker and run RTConfig or softreset your device to configure AppToDate.
Try this and don't forget a new version never more!
--> It is a work in progress. In future versions I will make a lot more.
Support this project
You can support this project making a donation clicking here or clicking the banners in the project website: http://remotetracker.sourceforge.net
Cheers,
Joubert Vasconcelos
my apologies if i'm blowing up a bubble here.. but doesn't TrackMe do the EXACT same thing?
nir36 said:
my apologies if i'm blowing up a bubble here.. but isn't TrackMe does the EXACT same thing?
Click to expand...
Click to collapse
I didn't know this software. Very good I think, I'll try later. But I suspect the objectives are different. RemoteTracker works only in silent mode to help you find your device if you loose it.
There is only one user interface to configure few parameters. After that you don't need to use it any more.
All functions are activated by SMS (remotely) and the answers will be by SMS or e-mail. For example you can use your wife's phone to send SMS to your lost phone and then receive GPS coordinates to find it.
If you want to compare RemoteTracker with other software, it's more similar to Mobile Justice, but with more features.
This is first goal of RemoteTracker. The second is help you to retrieve your personal data back. It's not totaly done yet. There is a work in progress.
Hope this answer your question
I think this is fantastic! Great idea! Do you think you can incorperate more CDMA-friendly, not-solely-sim-card features? I'm downloading now
I don't have a CDMA device But I think I can search for informations and then code, but without tests.
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
shantzg001 said:
About suggestions that similar software already exists, this is no argument that this software should not be developed. We see so many sw that do the same thing. Some do it better than the others. So, even reinventing the wheel is necessary smtimes because smone came made the tubeless tyres by reinventing the tubed ones. (and ofcourse, we all made "Hello World"'s, isn't it)
Thanks joubertvasc, and I wish you luck in your endeavour. Any development is good development.
Click to expand...
Click to collapse
I agree and thanks. I did not like the similar software in the market. And I need to learn VS .net, so I decide to make one by my self to learn and also for fun.
S.V.I said:
wow. If this is going to work as it should, then perhaps it is something that needs to be built into the rom itself?
what happens if the new owner decides to hard reset?
Sounds very promising! I'm bookmarking the page already!. can't wait to try it. than you for this!
Click to expand...
Click to collapse
One thing I'm thinking is how to reinstall RT automaticaly after a hard reset. May be using external cards, but the autorun feature only works when card in inserted.
Built into the ROM is possible, but only ROM cookers or manufactures can do it.
I think its early to think about it. RT have to me more tested.
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
nir36 said:
oh oh oh . my bad. i meant "Where Is My Phone"
where is my phone does the same thing
Click to expand...
Click to collapse
All WIMP does is send an SMS back with the current GPS co-ordinates, very useful but severely lacking compared to what the OP is trying to do. That said it is native PPC code with no need for .NET.
Surely we should commend anyone trying to write alternatives as without that attitude we would all be using Windows with MS Office and browsing using IE. Possibly not the best analogy but it will do.
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
i wasn't complaining. i think it's wonderful people are trying to develope new software. i was just giving reference.
phamhien said:
Thanks! It's great! Can I ask a question?
When the device's stolen, may be the thieft removed your SIM card and then insert a new one. So how to known a new phone number in that SIM card to you send a SMS?Tks!
Click to expand...
Click to collapse
When you run RT for the first time, the IMSI of your SIM card is stored. After a new 'boot' this IMSI is verified again. If the new IMSI does not match with the old, you will receive a SMS alerting you. This message has the new number. You must input an emercency mobile number in config tab. This number, of course, must be a mobile number diferent of yours (your wifes, mother, son, or so).
hoolahoous said:
maybe it can send sms with phone number whenever a sim card which is not in preconfigured list is inserted.
also another suggestion is, for the phones which do not have GPS, maybe it can send the tower information ? So that it could be used to track where it is based on the tower information ?
Click to expand...
Click to collapse
I have no idea how to get this information! But it's a good idead and I'll search this information.
Greaattttttt !!!
Can help for french translation, if you want to.
naboleo said:
Greaattttttt !!!
Can help for french translation, if you want to.
Click to expand...
Click to collapse
Of course I do! Thank you very much!
Very simple: copy and rename english.xml and english.htm to french.xml and french.html.
Edit both files and just translate ignoring the words between < and > characters (those are "commands").
Edit language.xml file and insert the lines below before </languages> (last line):
<language>
<code>4</code>
<name>Français</name>
<file>french.xml</file>
<help>french.html</help>
</language>
Today I was roaming around some blogs and stumbled upon an article with some tips to protect your "smartphone", they talked about a software called mSafe, I even downloaded it for test.
Anyway, it does mostly what you want to develop. The site is http://www.motionapps.com. Their apps are intended for Treos but mSafe states that it's compatible with WM5.
Just for your reference.
joubertvasc said:
I have no idea how to get this information! But it's a good idead and I'll search this information.
Click to expand...
Click to collapse
Well... I'm not familiar with windows mobile programming but I'm a SIM Card programmer. I don't know if you can access STK commands (commands to the sim card) via the Windows Mobile API's but, if you can, there is a function ("proactive command" using the specific SIM terms) called "PROVIDE LOCAL INFORMATION" that gives you exactly this information (and more)...
Hope it helps...
I have Verizion Wireless. I just installed BootLoader 2.40, Titan_Radio_ROM_3.42.30, dcd_titan_kitchen_3.2.2, and dcd Verizon Carrier 20080706.cab. I don't know if I was supposed to, but also did *228 option 1 to program my phone and *228 option 2 for updating roaming cababilities. The internet works fine on the phone and I can recieve text messages without any problems, but I can't make or recieve phone calls. Thanks for your help and time!!
Gonna go out on a limb here and guess that it's saying you're not authenticated?
You need to call Verizon and have them authenticate you. It's normal when you go from stock to a GPS radio.
I go with gc14 on this one. Just had the same thing happen to me a while ago after just doing a hard reset...no update ROM, radio, or anything. Just hard reset and no more authentication...what a pain. lol
Oh, yeah. I listened again and that's what she said. OK, I'll call them tomorrow.
I even got my TomTom GPS software working. I didn't need to use any 3rd party software to get it working either like it said on the forums.
I even got Opera Java working, but I got some kind of message when I was installing the Java software saying that Sprint couldn't guarantee something. I don't remember the exact message, but I don't have Sprint, I have Verizon. Did I install the wrong ROM or something? Am I going to have problems now? Thanks!
How come everywhere I go now it thinks my phone is a Sprint PPC-6800, when it's really a Verizion XV-6800? I just went to Yahoo.com and it's calling my phone a Sprint PPC-6800. Is this going to cause any problems with my Verizon account? Thanks..
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Apota said:
OK, I called Verizon this morning and they gave me a new A-Key, and I can make and receive phone calls now. I got a couple of other issues.
When I go to Messaging only Text Messages are their now and MMS Messages are missing. So, I can't figure out how to Send picture or video messages anymore. Before when I clicked on a pic it gave me the option of sending it via MMS and that option is now gone. Now, if I click on Send it takes me to, "Select an Account" but only Text Messages and Setup E-mail acount is there now. I don't know if the new version of WM6.1 handles MMS messages differently but I can't figure out how to send MMS text messages anymore. Am I missing something?
Also, I installed the v5 of the camera software and I can't figure out how to turn on the Flash. I've been messing with it, but can't figure it out.
Well, those are the only two issues so far, so hopefully somebody knows what's up and if I get them fixed I'll be really happy. Thanks everybody for all the help!!
Click to expand...
Click to collapse
I don't use text messages, so I can't be sure, but I think there are other links about text messages. You likely need to install a program. Try searching and let us know if you find it.
As far as the flash with v5 of camera, I think you are out of luck. My memory is there is no flash. There is a way of installing the old camera back without doing a hard reset. I just don't remember how to do it. You can try searching for this too. Again let us know if you find it. Hopefully someone else will be able to help more.
Yes, I think I found the solution, I did what it said and now it says SMS/MMS, but I haven't tested it yet. So, I'll see. I just need to know about the camera now. That's the only issue..
http://forum.xda-developers.com/showpost.php?p=2220029&postcount=6
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
don't down grade just reflash a cooked rom with the version 4.05 something camera has a flash
Reflashing ver 4.05 when you'd installed ver 5 IS downgrading in my book
Big Dawg 23 said:
Here is the updated link to Arcsoft. Works perfectly. The only defect I see is that incoming MMS show the phone number and the name in your contact. But when you reply as a text it comes back.
http://forum.xda-developers.com/showthread.php?t=404345
Click to expand...
Click to collapse
1st - The camera you used is version 5, to have the flash again you will need to re-cook a ROM with version 4.X....
2nd - For the latest MMS, use GC14's 5.0.31.25 cab of Arcsoft. The incoming MMS issue where the phone number is shown instead of your contact has been fixed. Find that cab here MMS 5.0.31.25
Yes, I've already read all of those links many times. I saw the information about the OEMizer. It said it was OPTIONAL. It doesn't really tell me what it is, or what it's for. Since this was the first time I ever installed a new bootloader, radio, rom and VZW cab, and didn't really know what I was doing, I didn't want to make it too complicated and overwelm myself. I still don't know what the OEMizer is, but I guess I can run it and see what happens. I need to make a new ROM anyways for the camera. I still have a few questions.
- What is the OEMizer for and is there someplace that explains it's settings?
- I can't find OEMizer in the Kitchen's Tool directory or any of the other Kitchen's directories. Where is it at? I did a search on the internet and couldn't find it.
- What is PagePool Changer? Is that something I need to use?
- Now I have the latest bootloader and radio installed in my phone already, can I make a new rom via the kitchen and just install it without having to worry about anything else?
- I guess I will still need to run the VZW cab file after I install a new ROM, but that should be it, right? Just those two things?
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
- WM6.1 is grouping all my text messages together, which is great and I love it, but the only problem is sometimes I want to deleate one text message and it seems like you can't and you have to delete all the text messages from the same person. Is that true, or is there a way around it?
Thanks everybody again for all your help!!!
BrianLayman said:
You really need to read through a whole ROM thread to understand all this, but there are so many little "Got ya!"s that the pay off is there. The Wiki is also a good place to start.
These three pages explain a lot of the issues:
http://wiki.xda-developers.com/index.php?pagename=TitanForBeginners
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
If you read the details of DCD's stuff you find that the kitchen/rom does not contain anything network specific and you MUST apply the OEMizer tool afterwords. The link to the verizon one is right in the post. That will solve some of your issues.
Also DCD has explained that the updated camera software was ripped from a phone that does not have a flash therefore it is not supported in the software. If you want the flash, you need to downgrade.
Click to expand...
Click to collapse
- I need a free registery editor. It looks like to upgrade to the latest Arcsoft MMS I need to edit the registery since I have an older version of Arcsoft installed right now.
Click to expand...
Click to collapse
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
To use this, uninstall any version of Arcsoft you may have installed currently. Once it is fully uninstalled, check your registry and make sure there is nothing for Arcsoft under "HKLM\Software." Next, install this cab. Once it is done installing, check your registry under "HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader" and make sure X-VzW-MDN is set correctly with your phone number.
gc14 said:
There is no need for any registry changes with my new version of Arcsoft. Uninstall the old one, then install the new one.
Click to expand...
Click to collapse
Yeah that was just for testing purposes originally...to make sure the previous one was completely uninstalled, then to make sure the new one installed correctly. It's been verified working though for a while.
Hello,
is there a way (software or setting) to configure my Wallaby (with PPC2002 or WM2003) that any incoming sms is forwarded to a defined number?
Thanks for any answer
Best regards
nobody an idea how to do that?
wallaby is the first htc phone out and a pretty dead device
I would
1 use search and look in the forum search for any info about forward calls
2 ask in another forum as forwarding of sms's would likely be a general wm thing rather then a spec wallaby thing
Hello Rudegar,
thanks for your answer.
The forwarding of calls is not really a problem.
But the forwarding of sms is one!
I have found some programs that can do automatic sms forwarding, but the problem is that they don't work with WM2003 or PPC2002 (the two OS for Wallaby).
Now i'm searching for a program that works on WM2003 or PPC2002!
I know that this device is very old, but i only want that this device forwards my calls and sms! So this device would be the whole time in the cradle. And i would use another device "Samsung Omnia" for working with it. So i think it would be a little bit to expensive to buy a new device only for being in the cradle and forwarding sms and calls!
I hope you know what i mean!
Best regards
Andy
i've not seen any .net sdk code that can handle sms for wm02/3, just the pocketoutlook for wm5/6.
i could be missing it, but goodchance you're going to be out of luck.
holgenoni said:
I have found some programs that can do automatic sms forwarding
Click to expand...
Click to collapse
Can you recommend any of these programs? Or name a few decent ones? It would be appreciated
Thanks
Hello,
none of them is working with the wallaby!!
holgenoni said:
Hello,
none of them is working with the wallaby!!
Click to expand...
Click to collapse
I'm off topic - or device - here, I use HTC touch Pro and Treo Pro, so i would appreciate if you know anything that runs on WM6, 6.1 or 6.5 that does this well. I DLed a trial of txtForward, it doesnt seem to work.
ANY suggestion/solution used with any success would be appreciated.
ohouigheighi said:
I'm off topic - or device - here, I use HTC touch Pro and Treo Pro, so i would appreciate if you know anything that runs on WM6, 6.1 or 6.5 that does this well. I DLed a trial of txtForward, it doesnt seem to work.
ANY suggestion/solution used with any success would be appreciated.
Click to expand...
Click to collapse
I bought txtForward. It forwards incoming text messages (with an option for outgoing as well) to an email address. So, since all my "phones" have at least exchange/active sync support, i get my text messages delivered to my email that i am always connected to. Good enough.
I have a problem since day he releassed the rom your "message has no valid recipients cannot send this message" any help woild be highly appreatiated. Thanks in advance
I tried adding +1 in front of the number, they are all mobile contacts and I tried erasing whole contacts and adding one number at the time but still no luck.
It's a problem with the MiUI build he was running. It's not just him, it's the actual base MiUI ROM that it's based on. Reading the forums there, it's still an issue to this day.
What you gotta do is remove all the brackets, dashes, spaces, etc, to make the number one long continuous thing. So instead of, for example, (403) 555-1212, you gotta make it +14035551212, no spaces, dashes, anything. AND you gotta have the + and country code (Canada and USA is 1).