Related
Build#: 4.5.2A-51_OLL-17
System: 45.2.17.MB860.BellMobility.en.CA
Version: 2.3.4 (on rooted stock Gingerbread)
I rooted my 2.3.4 Bell Atrix using the instructions on Atrixforums website, and it worked like a charm. Then i went into the market and downloaded ROM Manager, through which i flashed the latest Clockwork Mod Recovery. Since this was going to be my first time flashing a Custom ROM, I followed online advice of performing a Nandroid backup. I pressed "Backup Current ROM" in ROM Manager, and my phone turned off. When it turned back on, I was at the Motorola Dual Core screen, and at the top there was a message: "Failed to boot 2 Starting RSD Mode". After reading some more on the forums, I noticed that I never unlocked my phone and that I couldn't flash a custom Recovery meaning Nandroid backups won't work.
But now I'm stuck with a broken Recovery mode and I don't know what to do to fix this. Can I still flash the original recovery image back to fix the Failed to boot error?
Can someone please help point me to the right direction?
Thanks
Try pulling the battery. Hope that works, then unlock your phone, re root it and install rom racers recovery and you should be good to go. Thoroughly read the beginners thread, it will answer a lot of your questions and help walk you through everything you ned to do. Saved me a lot of hassle and headaches
JRW 28 said:
Try pulling the battery. Hope that works, then unlock your phone, re root it and install rom racers recovery and you should be good to go. Thoroughly read the beginners thread, it will answer a lot of your questions and help walk you through everything you ned to do. Saved me a lot of hassle and headaches
Click to expand...
Click to collapse
to unlock my phone, don't i need to get into the recovery mode first? I can still boot into the homescreen and do stuff, but it's just the recovery mode is screwed up. RSD lite and stuff still works though. Would you be kind enough to provide a link to the right direction to unlock the phone? Will this fix my recovery mode problem? I've been going on a wild goose chase to find a way to install a custom ROM and alot of the posts were for the AT&T Atrix (or at least i believe it's only compatible with the ATT Atrix).
no, you have to use RDS to flash a unlockable bootloader, use fastboot, and then install the custom recovery
Sent from my MB860 using XDA App
i am having this same exact problem as the original poster. i am still new to the "rooting" world, and the motorola atrix is quite a bit more difficult then the other devices i have rooted, if someone could link a guide to follow it would be very much appreciated, i have been browsing the forum for quite awhile now searching for a guide. again, thank you very much for your time and please excuse my ignorance.
guidoido004 said:
no, you have to use RDS to flash a unlockable bootloader, use fastboot, and then install the custom recovery
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
+1
Sent from my MB860 using XDA App
How to unlock:
http://forum.xda-developers.com/showthread.php?t=1136261
Maybe somebody can help me with this. I went through all the steps to unlock the bootloader and root the phone using Lokifish Marz guide(very helpful by the way). and now when you boot the phone up in the top left of the screen is the word unlocked.
However, when I go through the process of moto-fastboot. it acts like it's working just fine,erase recovery...OK, Sending Recovery.... OKAY, writing Recovery.... OK. but when I go to boot into recovery (power+volume down, scroll down to Android recovery and hit volume up) I get the Triangle with a !.
To make matters even more confusing, is I have got it to boot up to CWM. I did a full back up on internal, including web top and I thought I was good. I had to run to the grocery store so I booted my phone back up for the time being and went and did my errands, came back and booted into recovery(with the above way.) and bam! triangle, !, android guy.
I've done this a couple times. I'm assuming I'm doing something wrong however I can't seem to find anybody else that has had the same problem. I've held of on trying to flash a different rom, so I'm still running stock rooted.
I'm running Android Ver. 2.3.4 Build 198_6 and I've tried flashing a coule diffent versions of recovery3 including the one that came with Root-Unlock-Recover.
Anybody have any ideas?
I also have the same problem with my motorola photon. i went thru the steps
to unlock the bootloader it said it was unlocked i checked to make sure i was rooted with root check and it said i was. but when i power the phone on and boot i can see android recovery but when i select it the menu is not there just
a triangle and the android symbal, then i have to pull the battery to restart
it does and the phone seems to be working ok.
Well it make me feel better that im not the only one. What tools did you use to unlock your boot loader?
Sent from my MB855 using Tapatalk
What version of stock did you guys start with? I think there was an USCC OTA that IIRC locked up the boot loader on the Electrify.
Sent from my MB855 using xda premium
Started with Android Ver. 2.3.4 Build 198_6 , its the same one that's on there right now. and it's saying my boot loader is unlocked, I actually went through the fastboot unlock process again to check and it said it was already unlocked. Although I just tried flashing twrp recovery and the same thing happened, so it seems to be behaving like it flash's the new recovery but it doesn't.
Strangely though, I've been able to get into Clockwork Mod once or twice, but as soon as I reboot, and to go to recovery it takes me to triangle !, is that just stock recovery/bootloader? So basically CWM is a one time use then back to fast-boot to try again and again.
maybe I should look into re-locking and just going with a boot-strap?
So with some more Tinkering it seems I can get to ClockWorkMod so long as I don't reboot my phone all the way.
if I flash clockwork mod. pull the battery and boot into CWM it works fine, but if I fastboot reboot all the way it goes back to stock recovery. I'm beginning to think the boot loader isn't really unlocked even though it says it is.
Anybody else heard of this?
I have the same problem
please help me what to do
an9093 said:
I have the same problem
please help me what to do
Click to expand...
Click to collapse
READ THIS
and then
READ THIS
an9093 said:
I have the same problem
please help me what to do
Click to expand...
Click to collapse
I end up posting over in the developers form and the problem appears to be the file install-recovery.sh inside system/etc
I posted how I fixed it and somebody else also posted. check down at the bottom.
http://forum.xda-developers.com/showthread.php?t=1468978
I did my research on how to install ROMS with a locked S On and Kernels, but just got even more confused about the process. I am coming from an Evo 4g CDMA.
I have H BOOT 1.5 unlocked S ON. My back up was lost. I tried to flash something like the newest MIUI using TWRP 1.1. w/e. I can't get past the boot screen for MIUI. As I was reading up on the forums, it seemed to me that you had to use a program called Flash Image GUI to get a kernel going on a ROM. Though, here is where I was confused. If a ROM has a kernel in it and I flash the ROM, does the Kernel part of that flash not get set up as well?
Would I need to flash the rom like normal from the SD Card then use something separate to flash a Kernel? If so, I am kinda boned. I can't get into the phone, just the recovery and can't get that program installed on the phone Trying to flash up Xplode now to see if maybe I just got a bad download.
If these questions were answered, please forgive me, I did try to find the answers, but as I read up more and more, it was getting to be more and more confusing to my personal issue at hand.
Thanks for the help!!
If you grab the kernel from your Miui zip, it's in the zips root called boot.img
Put that into your folder with your fastboot exe
Boot into bootloader the same as when you flashed the CWM
Use fastboot command... fastboot flash boot boot.img
this will flash the kernel and you should be able to boot up properly
Oh, well that is the problem. I had someone else flash TWRP for me. Guess I need to find out more on how to flash up that to get the kernel going. This S On thing is a massive PITA, lol. Guess once I get the phone up and going and I can use that program, things will be way easier
Nametaken said:
Oh, well that is the problem. I had someone else flash TWRP for me. Guess I need to find out more on how to flash up that to get the kernel going. This S On thing is a massive PITA, lol. Guess once I get the phone up and going and I can use that program, things will be way easier
Click to expand...
Click to collapse
I see. i skipped the how to part since i thought you had alrady flashed the CMW your self, it's fairly easy.
you need..
1) to install the evo 3d usb drivers.. filename HTCDriver3.0.0.007.exe .sorry i don't have a link, i got them off these forums somewhere
2) you need the fastboot.exe , again search google/these forums
then shut down your phone
pull battery out, then back in
hold down volume- (minus) and then hold the power button as well, only let go once in the bootloader, choose the fastboot option then insert usb cable to phone->pc .. you should see fastboot-usb message come up on your phone
then you can type out that fastboot command in the previous post from a dos command prompt, from the directory with your fastboot exe and boot.img
It's easier to put rom you want on the SD card make sure debug is on.
Adb reboot bootloader . Now
Fastboot boot recovery.img now wipe and flash rom you are good to go man. Works flawless .
Sent from the Reaper.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Sorry about posting in the wrong area.
What I did, which can help out other 3D noobs is this:
Since I just unlocked and have no back up, my kernel was still stock
Downloading a stock rom and moving it to my phone via comp, twrp recovery mode>> USB Toggle allows you to connect to PC! Put the rom on the main part of the SD card and just flash like normal.
Here you should be able to boot up like normal again.
Let me say, Flash Image GUI is a noobs friend till you can learn to use adb more.
I was told you can put a Rom on your card and just flash allowing the kernel to flash as well. I have not had success with this with HBoot 1.5 S On.
Flash Image GUI:
Download the rom you want, Aosp to Sense is fine.
Open Flash GUI and choose the Browse option.
Locate your rom on your card and choose it.
The app will give you a message saying the rom is big yada yada, say yes.
Wait a few moments as it finds the kernel. Once it does, choose flash Image.
Choose reboot recovery and flash the exact rom you picked with the App. Reboot and win.
This is just what I, a noob, have found to work.
I have NOT been able to just flash any rom on the SD Card and have it work. Flash Image UI has NOT been able to get Virus' Rom to load
A's I find more noob friendly tips I can report.
Thanks everyone else for the input! I won't lie, I came from an Evo 4g and am totally lazy as I am used to S Off and just flashing away. S On, I hate you. ADB, I fear you. Flash Image GUI, I want to marry you!
CDMA 3D, I wish we had more AOSP lol
Hope this helps out some people.
Sent from my PG86100 using XDA
Nametaken said:
Sorry about posting in the wrong area.
What I did, which can help out other 3D noobs is this:
Since I just unlocked and have no back up, my kernel was still stock
Downloading a stock rom and moving it to my phone via comp, twrp recovery mode>> USB Toggle allows you to connect to PC! Put the rom on the main part of the SD card and just flash like normal.
Here you should be able to boot up like normal again.
Let me say, Flash Image GUI is a noobs friend till you can learn to use adb more.
I was told you can put a Rom on your card and just flash allowing the kernel to flash as well. I have not had success with this with HBoot 1.5 S On.
Flash Image GUI:
Download the rom you want, Aosp to Sense is fine.
Open Flash GUI and choose the Browse option.
Locate your rom on your card and choose it.
The app will give you a message saying the rom is big yada yada, say yes.
Wait a few moments as it finds the kernel. Once it does, choose flash Image.
Choose reboot recovery and flash the exact rom you picked with the App. Reboot and win.
This is just what I, a noob, have found to work.
I have NOT been able to just flash any rom on the SD Card and have it work. Flash Image UI has NOT been able to get Virus' Rom to load
A's I find more noob friendly tips I can report.
Thanks everyone else for the input! I won't lie, I came from an Evo 4g and am totally lazy as I am used to S Off and just flashing away. S On, I hate you. ADB, I fear you. Flash Image GUI, I want to marry you!
CDMA 3D, I wish we had more AOSP lol
Hope this helps out some people.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
ADB is pretty simple to flash with lol
All you do is keep a copy of the recovery.img you are using in your adb folder...
You hold shift down right click on the folder that adb is in platform tools folder is where it's at say open cmd prompt to it. That is the fast painless method
Make sure you have a rom on your sd card.... Also that debug is turned on...
Plug phone in hook to computer...
ADB:
adb reboot bootloader
now:
fastboot boot recovery.img takes you into recovery...
Now wipe don't wipe SD card...
Flash rom your set works on virus roms and any other rom 0 issues
Also Flash GUI works for everyone nothing wrong with it....
I just prefer Good Old Adb to do my work If you need any help feel free to ask man.. I'll do what I can to help ya out if you get stuck..
reaper24 said:
ADB is pretty simple to flash with lol
All you do is keep a copy of the recovery.img you are using in your adb folder...
You hold shift down right click on the folder that adb is in platform tools folder is where it's at say open cmd prompt to it. That is the fast painless method
Make sure you have a rom on your sd card.... Also that debug is turned on...
Plug phone in hook to computer...
ADB:
adb reboot bootloader
now:
fastboot boot recovery.img takes you into recovery...
Now wipe don't wipe SD card...
Flash rom your set works on virus roms and any other rom 0 issues
Also Flash GUI works for everyone nothing wrong with it....
I just prefer Good Old Adb to do my work If you need any help feel free to ask man.. I'll do what I can to help ya out if you get stuck..
Click to expand...
Click to collapse
You can not flash some ROMS through ADB/Fastboot with s-on, it just doesn't work no matter which way you go about it. Flashing a recovery is easy but that was not the OP's problem. The "noob" way that the OP suggested is the only way to get roms with custom boot.img in the zip to stick. I just installed CM9 and ADB/fastboot was of no use. Getting into recovery is easy but will not provide results unless you have used FlashImageGUI.apk first on a working ROM.
Nether CWM nor TWRP work to flash such ROM's with the right boot.img. You must use FlashImageGUI.apk!
StevetotheH said:
You can not flash some ROMS through ADB/Fastboot with s-on, it just doesn't work no matter which way you go about it. Flashing a recovery is easy but that was not the OP's problem. The "noob" way that the OP suggested is the only way to get roms with custom boot.img in the zip to stick. I just installed CM9 and ADB/fastboot was of no use. Getting into recovery is easy but will not provide results unless you have used FlashImageGUI.apk first on a working ROM.
Nether CWM nor TWRP work to flash such ROM's with the right boot.img. You must use FlashImageGUI.apk!
Click to expand...
Click to collapse
I never had any issues using cwm the older version 4.0 to flash any rom the fastboot method Anyway's older TWRP and Newest CWM had some issues with not wiping right to flashing funky...
I will help the OP out if he ever gets stuck
Yeah reaper your right! I think I came off like a ****, I am one, but didn't mean to come off sounding snide.
Sent from my HTC Evo 3D using XDA
StevetotheH said:
Yeah reaper your right! I think I came off like a ****, I am one, but didn't mean to come off sounding snide.
Sent from my HTC Evo 3D using XDA
Click to expand...
Click to collapse
It's all good man no worries Your cool
Sent from my PG86100 using xda premium
Dah da dat ta ta! (Swoops in with my 2 cents)
See the Guide/Flashing Notes in my signature for a walkthru for flashing roms, recoveries, etc. All up to date. Choose your method: fastboot & recovery or flashimage & recovery.
Note: TWRP 2.0 with Dumlock is a workaround to avoid using fastboot (pc). FlashImage is not a requirement, its also a workaround vs fastboot.
mpgrimm2 said:
Dah da dat ta ta! (Swoops in with my 2 cents)
See the Guide/Flashing Notes in my signature for a walkthru for flashing roms, recoveries, etc. All up to date. Choose your method: fastboot & recovery or flashimage & recovery.
Note: TWRP 2.0 with Dumlock is a workaround to avoid using fastboot (pc). FlashImage is not a requirement, its also a workaround vs fastboot.
Click to expand...
Click to collapse
Nice I was wondering when you was gonna pop in . LOL
Sent from my PG86100 using xda premium
Thanks erryone. I hope others were able to get some help here that are new to 3vo and flashing. I am so waiting for a nub proof s-off method.
Sent from my PG86100 using XDA
There is the HBOOT downgrade. I have ZERO linux experience whatsoever and thought the process was very easy. I know it says to 'brick' the phone, but it is honestly not that scary. I have done two of these already both being successful on the first attempt. The live cd by closeone actually takes care of almost everything, except for actually doing the brick. Trust me being on 1.40 s-off is much much nicer.
Hi, I have an Amaze 4G with ICS 4.0.3, and I want to change the rom for space in the internal memory and battery life, but it has the android 3e recovery, and will not let me flash any recovery or roms or any ZIP, always gives me the error "e: signature failure". I root, I replaced the recovery of the / system / bin for one of this forum, as amended, but still all the same. I visited all the xda forums and HTCMania, I'm Spanish and I can hardly understand English, but I have not found a way to flash without me signing error android 3e.
Help, please
Read This. It has EVERYTHING Amaze Related. Before asking another question always revert back to that to see if the question you have already has an answer.
Double0EK said:
Read This. It has EVERYTHING Amaze Related. Before asking another question always revert back to that to see if the question you have already has an answer.
Click to expand...
Click to collapse
thanks for you fast response, but i trying do it the guide step by step, no errors are saying for my phone, but reboot in recovery and beguin in android recovery 3e.
i trying more and more and more things, but never go.
odin error
amon-ra error
4ext error
clockworkmod all well but reboot in the 3e
etc, etc.
now i desilusions, for a wipe format, my google apps no go. google play no downs the apks.
i desesperated, i sorry for discomfort, but now not to try.
[Deleted]
Is your bootloader unlocked?
Sent from my SGH-T999 using xda app-developers app
Its really hard to understand but I don't think you unlocked your boot loader and flashed a recovery.
What method did you use to root?
Double0EK said:
Its really hard to understand but I don't think you unlocked your boot loader and flashed a recovery.
What method did you use to root?
Click to expand...
Click to collapse
i`m root with unlockroot.
Gasuky said:
i`m root with unlockroot.
Click to expand...
Click to collapse
How sure are you that you're rooted? Anyways, if you just used an app to root, it won't be possible to flash a custom recovery until you unlock your bootloader.
hello, I have not posted before, it broke my wifi.
Turns out my ruby, is a Chinese clone, if you have not unlocked the bootloader, but try to flash the recovery.img with flashtools and I did, but it was starting to 3e, so try flashing boot.img, a boot.img flashtools accept, and did, but when you restart the phone, it stays in green android screen with black background.
Any idea?
Gasuky said:
hello, I have not posted before, it broke my wifi.
Turns out my ruby, is a Chinese clone, if you have not unlocked the bootloader, but try to flash the recovery.img with flashtools and I did, but it was starting to 3e, so try flashing boot.img, a boot.img flashtools accept, and did, but when you restart the phone, it stays in green android screen with black background.
Any idea?
Click to expand...
Click to collapse
You honestly lost me there, if your device is a Chinese clone, why would you attempt to flash files from this device to begin with? You'll need the stock files for that device to recover it.
of course, but i buy an Htc Amaze 4g and not a chinese phone. i dont know that thing, and now flash recovery.img and boot img compatibles with htc ruby, with flashtools and my phone fake is brick. Only on to android green and hold in that screen.
Today, i open new thread
http://forum.xda-developers.com/showthread.php?t=1916935.
i am not know this phone is a fake.
somebody can help me.
Thanks.
otherwise, a friend too buy the same phone. I can get the archives necessary to recovery my phone?
I did not know it was a clone, I bought it as HTC Amaze 4G:
http://www.fastcardtech.com/goods.php?id=7080
but when I hear that is a clone someone contact the customer service, and gave me the link to download the stock ROM from my phone.
http://www.sendspace.com/file/lgkfyw
So I made my query in this forum. From what I have seen, this MOBILE, carries a EVO 4g rom, so I'll try to find solutions for this.
I appreciate all the responses received.
thanks
Hi, sorry to xda for posting in bad sections in the past but i am dumb hence my problem please please please help
I have mb860 i think i have emara as firmware? when i browse through my backup files from titanium backup in text mode i see android 2.3.4 then emara and its version...
I cant fully check this all because my phone is not working and only boots into android recovery. I have stock, my bootloader is not unlocked. I tried flashing over cwm into the recovery partition and got an error basocally saying my bl was locked, so i tried some fixes with fastboot but both methods gave me "(bootloader)OEM unlock not implementable"
So i dont know how to unlock bl, which means i dont know how to open a adb shell and move around my phone...
Also i got rsd lite (i never used this when i programed for android) because i wanted to push an entire sbf.. Only problem is every sbf link is broken for my version that i find and even xda links to a filefsctory depository wich is littered with actual viruses...
My head really hurts so if anyone can help im so sorry if im not clear i will try hard to explain just ask.... I havnt slept since it happened about 40 or 50 hours ago?
Oh yeah what happened?
I moved an app called "system tuner" out of /sys and instantly got notifications telling me applications were force closing... They were back to back and i could not long hold home and just move system tuner back and ignore them, i tried and almost made it to move system tuner back but then all i saw was a vertical display of my battery being charged....... Now i can boot into android recovery mode and nvflash fastboot rsd and about 7 more...
I thought i had luck with usb enumeration and that would make it go as usb mass storage and i could do something. And my usb driver read it as a usb storage device but it didnt work.
I have a backup of user and syte, data by backup titanium on my pc thats how i saw i had 2.3.4... The update.zip backup is on my phone... Speaking of that can i somehow fix my problem by putting a .zip file on my phone? To repopulate it? I think its all gone????
EDIT: MY BLOOTLOADER IS LOCKED... IM 99%
And idk if it means anything when i plug into rsd mode, my ui on my pc tells me im connected to "se flash olympus" which is all good but it doesnt have an (imei/esn/meid) number.?????
leathan said:
Hi, sorry to xda for posting in bad sections in the past but i am dumb hence my problem please please please help
I have mb860 i think i have emara as firmware? when i browse through my backup files from titanium backup in text mode i see android 2.3.4 then emara and its version...
I cant fully check this all because my phone is not working and only boots into android recovery. I have stock, my bootloader is not unlocked. I tried flashing over cwm into the recovery partition and got an error basocally saying my bl was locked, so i tried some fixes with fastboot but both methods gave me "(bootloader)OEM unlock not implementable"
So i dont know how to unlock bl, which means i dont know how to open a adb shell and move around my phone...
Also i got rsd lite (i never used this when i programed for android) because i wanted to push an entire sbf.. Only problem is every sbf link is broken for my version that i find and even xda links to a filefsctory depository wich is littered with actual viruses...
My head really hurts so if anyone can help im so sorry if im not clear i will try hard to explain just ask.... I havnt slept since it happened about 40 or 50 hours ago?
Oh yeah what happened?
I moved an app called "system tuner" out of /sys and instantly got notifications telling me applications were force closing... They were back to back and i could not long hold home and just move system tuner back and ignore them, i tried and almost made it to move system tuner back but then all i saw was a vertical display of my battery being charged....... Now i can boot into android recovery mode and nvflash fastboot rsd and about 7 more...
I thought i had luck with usb enumeration and that would make it go as usb mass storage and i could do something. And my usb driver read it as a usb storage device but it didnt work.
I have a backup of user and syte, data by backup titanium on my pc thats how i saw i had 2.3.4... The update.zip backup is on my phone... Speaking of that can i somehow fix my problem by putting a .zip file on my phone? To repopulate it? I think its all gone????
EDIT: MY BLOOTLOADER IS LOCKED... IM 99%
And idk if it means anything when i plug into rsd mode, my ui on my pc tells me im connected to "se flash olympus" which is all good but it doesnt have an (imei/esn/meid) number.?????
Click to expand...
Click to collapse
So basically what you're saying is you have a stock device, locked bootloader, and you failed to read the directions about unlocking (pudding sbf, oem unlock, custom recovery). How do you expect to flash custom roms or custom recoveries with a locked bootloader?
palmbeach05 said:
So basically what you're saying is you have a stock device, locked bootloader, and you failed to read the directions about unlocking (pudding sbf, oem unlock, custom recovery). How do you expect to flash custom roms or custom recoveries with a locked bootloader?
Click to expand...
Click to collapse
What do you mean failed to read the instructions, i have done this before ... and i even thought flashing was actually one way to unlock the bl. Also i followed more than one tutorial explaining how to unlock the bl.
How do i expect to flash over a stock recovery?
I really dont know man im asking for help i just tried using rsd lite to flash a 2.3.6 att firmware stock rom...
My head hurts help me out what should i do?
leathan said:
What do you mean failed to read the instructions, i have done this before ... and i even thought flashing was actually one way to unlock the bl. Also i followed more than one tutorial explaining how to unlock the bl.
How do i expect to flash over a stock recovery?
I really dont know man im asking for help i just tried using rsd lite to flash a 2.3.6 att firmware stock rom...
My head hurts help me out what should i do?
Click to expand...
Click to collapse
You can use sbf as a means of unlocking bl... RIGHT..... ?...
Also idk if you read but i cant properly boot up so i need to use adb or fastboot or rsd... Right....? Maybe i explained things bad? I think with a sbf that is compatible ill be ok... Or maybe help unlocking bl first? I need help i tried alot on my own...
Don't you ever flash an SBF, they are not safe.
Unlock bootloader
Flash recovery
Flash stock 2.3.6 fruitcake
DONE!
Feche said:
Don't you ever flash an SBF, they are not safe.
Unlock bootloader
Flash recovery
Flash stock 2.3.6 fruitcake
DONE!
Click to expand...
Click to collapse
The xda tutorial had be download ihop_bell.sbf ???? Pretty sure im bricking my phone now.... Can not find working unlock code, or working sbf. And right now my phones stuck flashing something... Its stuck on "phone being booted" ill let it go till battery drains... Or close... But yeah ithink i brinked it... Ill let you know
Edit: it said finished checking...
Edit2: HOLY BUUTMUNCHES!! i did the exact same thing as always and this time it worked!! Bootloader unlocked!! I have no idea what i did differentlY.. I SWER I DID THIS BEFORE.. Im not uber dumb.. Oooookie im so happy so now i can get custom rom!!!!??? I just wanted stock but i cant find that lol... Gunna try pushing cwm to recovery again...
leathan said:
You can use sbf as a means of unlocking bl... RIGHT..... ?...
Also idk if you read but i cant properly boot up so i need to use adb or fastboot or rsd... Right....? Maybe i explained things bad? I think with a sbf that is compatible ill be ok... Or maybe help unlocking bl first? I need help i tried alot on my own...
Click to expand...
Click to collapse
SUCCESS!!! Any links for something good i can install now? I havnt used cwm in years. Help a bit with links... I here cm7 is good... Believe it or not im actually not an adroid noob... Im just a noob period. Anyway i redid the process of flashing an sbf that would allow me to unlock bootloader... The 4th time i did it it worked. I have a veru very very very very bad laptop maybe thats why? Or im just a noob. Regardless its fixed and im so happy thats to the user who treated me like a noob it made me go back and redo everything i had done
Search for a 2.3.6 fruitcake, that is stock.
---------- Post added at 03:12 AM ---------- Previous post was at 03:02 AM ----------
Here you have stock fruitcakes http://www.das8nt.com/sbffiles.html
Feche said:
Search for a 2.3.6 fruitcake, that is stock.
---------- Post added at 03:12 AM ---------- Previous post was at 03:02 AM ----------
Here you have stock fruitcakes http://www.das8nt.com/sbffiles.html
Click to expand...
Click to collapse
Much thanks... Google -> 2.3.6 fruitcake update.zip
Thats what im searching...?
Oops i m dumb ok got it!