i get this error everytime i try to update my gs2 (failed to update firmware try again useing pc software kies)
android version 2.3.3
basband i9100xxke7
kernal [email protected] #2
any help would be greatly appriciated
Jonny112 said:
i get this error everytime i try to update my gs2 (failed to update firmware try again useing pc software kies)
android version 2.3.3
basband i9100xxke7
kernal [email protected] #2
any help would be greatly appriciated
Click to expand...
Click to collapse
Umm , judging by what I'm seeing , I suppose you only ran the "Check for updates" thingy in the Settings ? It only checks if there are any updates available, you have to do the actual updating via PC with an application called Kies. Get it from Samsung official website and follow instructions to get the updates, if any.
Edit : ... or by using Kies Air, but that's something else.
gr4ndm4st3r_bl4ck said:
Umm , judging by what I'm seeing , I suppose you only ran the "Check for updates" thingy in the Settings ? It only checks if there are any updates available, you have to do the actual updating via PC with an application called Kies. Get it from Samsung official website and follow instructions to get the updates, if any.
Edit : ... or by using Kies Air, but that's something else.
Click to expand...
Click to collapse
ive tryed with kies and all i get is this firmware is not compatible with kies ive also updated kies with no luck
forget about kies - it sucks! use stock rom + odin
were can i get stock roms from sorry for the stupid question new to this fourm ive used odin and all that jazz b4
Jonny112 said:
were can i get stock roms from sorry for the stupid question new to this fourm ive used odin and all that jazz b4
Click to expand...
Click to collapse
let me check that for you... what country? do you have international SGS2 (I9100)?
golcheck said:
let me check that for you... what country? do you have international SGS2 (I9100)?
Click to expand...
Click to collapse
its an o2 uk galaxy s2
Jonny112 said:
its an o2 uk galaxy s2
Click to expand...
Click to collapse
so the same as mine I recommend XWKL1:
PDA: XWKL1| Modem/phone: XXKL1| CSC: XEUKH2
Download: http://www.multiupload.com/9EQNGCY4RV
It's the newest for Europe. Latest O2 branded firmware is still 2.3.5
I use XWKL1 and it's working perfectly
golcheck said:
so the same as mine I recommend XWKL1:
PDA: XWKL1| Modem/phone: XXKL1| CSC: XEUKH2
Download: http://www.multiupload.com/9EQNGCY4RV
It's the newest for Europe. Latest O2 branded firmware is still 2.3.5
I use XWKL1 and it's working perfectly
Click to expand...
Click to collapse
is it official samsung software ?
Jonny112 said:
is it official samsung software ?
Click to expand...
Click to collapse
yes. all of the custom roms are based on this firmware. This is the most recent and the most stable. clean and official
---------- Post added at 10:11 PM ---------- Previous post was at 10:08 PM ----------
and kernel if you need one:
XXKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
thank you, you have been great help xD
Jonny112 said:
thank you, you have been great help xD
Click to expand...
Click to collapse
no probs
can you tell me how to install kernal please
The same way you flash rom. Put kernel file in PDA
Sent from my GT-I9100 using XDA App
Related
Hello,
I am brand new here and just got my S2, which I would like to root. I have read the post from Chainfire. My question now is:
My base version is I9100BOKD1
Buidl. GINGERBREAD.BOKE4
Kernel 2.6.35.7-9100BOKE4-CL-188639root DELL102#2
Can I use the XWKDD_insecure.tar for rooting or do I need another version. Would an upgrade by Samsung to a newer version still be possible?
Hope some can help me on this, not willing to brick it!
Thanks in advance
you definitely can use this kernel for rooting, just flash back your stock kernel afterwards!
Sent from my GT-I9100 using XDA Premium App
Teddybear2 said:
Would an upgrade by Samsung to a newer version still be possible?
Click to expand...
Click to collapse
That's an interesting question for me, as well. Should an update come out, how can I apply it, since my phone is rooted?
you can always flash new fw versions with ODIN
Sent from my GT-I9100 using XDA Premium App
damascato said:
That's an interesting question for me, as well. Should an update come out, how can I apply it, since my phone is rooted?
Click to expand...
Click to collapse
Update depends upon the product code on the phone .
for updates via Kies or flash generic via Odin .
jje
TML1504 said:
you definitely can use this kernel for rooting, just flash back your stock kernel afterwards!
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Thanks for the answer. Where do I get the stock kernel from? Is it possible to backup it from the device.
I read that I would need the adb driver for my phone. I have KIES installed and I am able to get on the phone via MyPhoneExplorer. However, KIES does not work. Where do I get the adb driver from? Uninstall and reinstall KIES? Thanks anyway for the quick response!
Teddybear2 said:
Thanks for the answer. Where do I get the stock kernel from? Is it possible to backup it from the device.
I read that I would need the adb driver for my phone. I have KIES installed and I am able to get on the phone via MyPhoneExplorer. However, KIES does not work. Where do I get the adb driver from? Uninstall and reinstall KIES? Thanks anyway for the quick response!
Click to expand...
Click to collapse
welcome
regarding adb drivers: install the android sdk or search in google for a suitable driver, you definitely will find one!
regarding stock kernel take a look here
TML1504 said:
welcome
regarding adb drivers: install the android sdk or search in google for a suitable driver, you definitely will find one!
regarding stock kernel take a look here
Click to expand...
Click to collapse
So essentially for my version I would need the KE4? right?
I already rooted SonyEricsson Xperia X10 and X10mini, so this should not be a problem. I just want to make sure to have the right stuff in place and not to brick it. Thanks again!
No KE7 should work it has KE4 modem baseband .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
JJEgan said:
No KE7 should work it has KE4 modem baseband .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Click to expand...
Click to collapse
So you are saying I already have KE7 although it says KE4 in the build? Why should I use the KE7 then?
I tried to use KIES to look for updates, however S2 is not recognized by KIES.
In terms of the adb driver ( I use WIN XP SP3), do I need to see it. I am able to connect to the internal SD Card. So does it work then?
Teddybear2 said:
So you are saying I already have KE7 although it says KE4 in the build? Why should I use the KE7 then?
No i saide KE7 should work
KE4 is not firmware its the modem if you are reading . = Baseband
KE7 Build KE4 Baseband is what about phone reads .
I tried to use KIES to look for updates, however S2 is not recognized by KIES.
No you have no longer got the firmware that goes with the phone so it cannot find correct codes .
ABD no idea never us it .
jje
Click to expand...
Click to collapse
JJEgan said:
Teddybear2 said:
So you are saying I already have KE7 although it says KE4 in the build? Why should I use the KE7 then?
No i saide KE7 should work
KE4 is not firmware its the modem if you are reading . = Baseband
KE7 Build KE4 Baseband is what about phone reads .
I tried to use KIES to look for updates, however S2 is not recognized by KIES.
No you have no longer got the firmware that goes with the phone so it cannot find correct codes .
ABD no idea never us it .
jje
Click to expand...
Click to collapse
Thanks. As I am a Newbie I jsut need little advice.
I finally managed to connect with KIES by simply disabling UBS debugging. Now I have what is rquired to know:
PDA: KE4
Phone KD1
CSC KE4 (DTM).
So I suspect I could take the KE4 from here:
http://forum.xda-developers.com/showthread.php?t=1101671
As far as I understood from our conversation is that KE7 is the newest kernel and KE4 is included. Would an upgrade to KE7 still allow me to officially upgrade to a possible newer version?
You would advice to take KE7?
Click to expand...
Click to collapse
Could someone help me with this please!
Teddybear2 said:
JJEgan said:
As far as I understood from our conversation is that KE7 is the newest kernel and KE4 is included. Would an upgrade to KE7 still allow me to officially upgrade to a possible newer version?
Ke7 is now superseded for some by KE8
Modem in KE7 is KE4 .
Once you move to stock rom you may lose your update path through Kies .
You have posted
PDA: KE4 older firmware than KE7
Phone KD1 Older Modem than KE4
CSC KE4 (DTM).
But the Kies update path will always be open if you update via Kies from original firmware even if its much later for updates than flashing stock rom via Odin .
Path for firmware is Samsung build stock rom its then passed to the network /providers for testing and customisation they then send to Kies . Kies matches original firmware product codes etc finds a matching update and downloads .
jje
Click to expand...
Click to collapse
Click to expand...
Click to collapse
JJEgan said:
Teddybear2 said:
JJEgan said:
As far as I understood from our conversation is that KE7 is the newest kernel and KE4 is included. Would an upgrade to KE7 still allow me to officially upgrade to a possible newer version?
Ke7 is now superseded for some by KE8
Modem in KE7 is KE4 .
Once you move to stock rom you may lose your update path through Kies .
You have posted
PDA: KE4 older firmware than KE7
Phone KD1 Older Modem than KE4
CSC KE4 (DTM).
But the Kies update path will always be open if you update via Kies from original firmware even if its much later for updates than flashing stock rom via Odin .
Path for firmware is Samsung build stock rom its then passed to the network /providers for testing and customisation they then send to Kies . Kies matches original firmware product codes etc finds a matching update and downloads .
jje
Click to expand...
Click to collapse
That helps! Thank you!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
is it possible to root without kies? i have a mac and a 5 year old laptop.
I have tried numerous time to install kies but time and again it just get's stuck on "installing software" i waited for housing and it didn't do a thing.
can you use the odin/oneclickmethod without the need of kies? thanks
Did I figure it out I new also and I started to read chainfire procedure and but my problem is what kernel drive should I use .*
My kernel version currently is 2.6.35.7 - i9100 MUGKG2 - CL37 1789dhl 130.yoo @ sep-48 #2
Did I figure it out I new also and I started to read chainfire procedure and but my problem is what kernel drive should I use .*
My kernel version currently is 2.6.35.7 - i9100 MUGKG2 - CL37 1789dhl 130.yoo @ sep-48 #2
Click to expand...
Click to collapse
where are you from ?? which language you need ?? which Android Version you have (2.3.3. or 2.3.4)
MUG ???
MUGKG2 is from Canada droid version 2.3.3 if im not mistaken.
can i grab the original kernal files off you by any chance op?
MUGKG2 2.3.3? Thanks
Ok so i've returned my phone to stock firmware, which is 02 branded KF3. Kies reads my phone as PDA:KF3 / PHONE:KE7 / CSC:KJ1 (FOP). It initially said KG2 for CSC but i've changed it thinking this was my problem.
Anyway enough blabbering. My problem is kies wont update, it says this version of the device cannot be updated. Any ideas what i need to do next?
Cheers
Ricey
ricey1986 said:
Ok so i've returned my phone to stock firmware, which is 02 branded KF3. Kies reads my phone as PDA:KF3 / PHONE:KE7 / CSC:KJ1 (FOP). It initially said KG2 for CSC but i've changed it thinking this was my problem.
Anyway enough blabbering. My problem is kies wont update, it says this version of the device cannot be updated. Any ideas what i need to do next?
Cheers
Ricey
Click to expand...
Click to collapse
I would forget about Kies. They are extremely slow in releasing updates. I recommend updating via Odin to XWKL1 (Open Europe) 2.3.6
Or alternatively update to UK vodafone branded BUKJ3 2.3.5
golcheck said:
I would forget about Kies. They are extremely slow in releasing updates. I recommend updating via Odin to XWKL1 (Open Europe) 2.3.6
Or alternatively update to UK vodafone branded BUKJ3 2.3.5
Click to expand...
Click to collapse
I would never use keis normally, but my concern is if i ever need to return for warranty am i doing something wrong for them to be able to tell?
Thanks
Ricey
ricey1986 said:
I would never use keis normally, but my concern is if i ever need to return for warranty am i doing something wrong for them to be able to tell?
Thanks
Ricey
Click to expand...
Click to collapse
It was my concern as well. But if you follow flashing steps then nothing could go wrong. But if... then just flash stock rom version you had at the beginning, if needed use jig to reset the counter and you can easily take your phone back to the shop
golcheck said:
It was my concern as well. But if you follow flashing steps then nothing could go wrong. But if... then just flash stock rom version you had at the beginning, if needed use jig to reset the counter and you can easily take your phone back to the shop
Click to expand...
Click to collapse
Yeah i know that but my point is if kies knows so easily that im not running complete stock i must be doing something wrong or missing an extra step??
Ricey
ricey1986 said:
Yeah i know that but my point is if kies knows so easily that im not running complete stock i must be doing something wrong or missing an extra step??
Ricey
Click to expand...
Click to collapse
this may be the case of CSC as you mentioned. If you want stock O2 then try one more time KF3 but it's old 2.3.3, if CSC won't update then use O2 KJ1 2.3.5
---------- Post added at 09:35 PM ---------- Previous post was at 09:31 PM ----------
you cans also try flashing just CSC:
UK XEUKD1 CSC: http://www.multiupload.com/Q1B368562N
Password: [email protected]
UK XEUKH2 CSC: http://www.multiupload.com/UR5DI1JKXU
Okay cheers ill try them CSC tonight when i get home. Just thinking that I sim unlocked my phone using the galaxy s tool off the market would this have that affect?
Sent from my GT-I9100 using xda premium
Hey guys,
I flashed a custom kernel and i'm don't be satisfied with it. Can you guys say me how I can revert my phone back to stock and get away this triangle and the reset the counter?
Thanks Jahai
Sent from my GT-I9100G using xda premium
Which custom rom did you use?
Sent from my GT-I9100G using XDA App
ronhoover88 said:
Which custom rom did you use?
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
A kernel called superatmos.
Sent from my GT-I9100G using xda premium
Restore your Nandroid backup .
A flash stock kernel or
B flash full firmware
Both found via Search .
jje
Jahai said:
A kernel called superatmos.
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Not kernel,What stock ROM/Firmware do you want??
If you only want the stock kernel then you will need to give us the original firmware you have on your phone.
unable to locate stock rom
I have recently purchased an sgs2 (actually came to my senses and swapped it for a blackberry) and have been scouring the forum for information on how to restore the rom to stock so I have a base to start from. I am new to Android so excuse my ignorance on this. If I do a *#1234# I get the following:
PDA: I9100XXKI3
PHONE: I9100XXKI3
CSC: I910OXAKI3
Build Info: Thu Sep 15 13:53:07 KST 2011
I am based in South Africa and can use the phone as normal but it does currently seem to be a bit unstable and the Market Place crashes fairly regularly on the phone. My carrier is Vodacom South Africa and from research the ROM I have on the phone is a generic for Europe (not sure if this is relevant).
In Kies, there is a message that says updates cannot be done using KIES.
I have tried download the stock ROM from the links on the forum but multiupload.com seems to be down or has very high congestion.
HELP PLEASE!!!
cooza said:
Not kernel,What stock ROM/Firmware do you want??
If you only want the stock kernel then you will need to give us the original firmware you have on your phone.
Click to expand...
Click to collapse
I only want to go back to stock ROM, German unbranded stock ROM. doesn't matter what firmware.
Sent from my GT-I9100G using xda premium
Jahai said:
I only want to go back to stock ROM, German unbranded stock ROM. doesn't matter what firmware.
Find in the stock rom thread .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
---------- Post added at 03:52 PM ---------- Previous post was at 03:50 PM ----------
Bazilla said:
I have tried download the stock ROM from the links on the forum but multiupload.com seems to be down or has very high congestion.
HELP PLEASE!!!
Click to expand...
Click to collapse
Multiupload closed by the FBI .
Use Sammobile.com or a Google search for the firmware .
jje
Click to expand...
Click to collapse
which is the correct
Jahai said:
Use Sammobile.com or a Google search for the firmware .
Click to expand...
Click to collapse
The real question I have is which is the correct ROM to download? There is such a lot of information that I am totally confused now.
On all the posts I've seen so far the one to download for South Africa could be many different versions. What is the relevance of this information?
XWKI4
Firmware info
PDA:XWKI4
PHONE: XXKI1
Date: 14/09/2011
Android 2.3.4
What information do I use to determine the correct version of file to download. I am completely confused by the mass of information available, especially considering my phone is currently running what I assume to be XXKI3 which is non south african.
Could it be that my phone was originally purchased in Europe? If thisd is so should I be installing a version of ROM for that region or will any region do?
Bazilla said:
The real question I have is which is the correct ROM to download?
What firmware was on the phone originally or what firmware do you want .
Could it be that my phone was originally purchased in Europe?
Who knows ???
CSC: I910OXAKI3 but that reads as Polish CSC from memory .
Its normal to download the firmware for the location the phone is being used in .
Its also usual to download the latest version .
Its the CSC that gives local network details and the baseband /modem that may be changed if poor reception .
XILA2
Android 2.3.6
This package has: PDA: XILA2| Modem/phone: XXKL1| CSC: XEUKH2
Latest posted for the UK .
I would flash that enter network settings if needed manually .
CSC or modem can be changed later .
Note multiupload is closed down for good you will need a Google search or Sammobile .com for firmware .
jje
Click to expand...
Click to collapse
Jahai said:
I only want to go back to stock ROM, German unbranded stock ROM. doesn't matter what firmware.
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Here mate.Dont think it has a password but if it asks for one when you unzip it try samfirmware.com or samsung-firmwares.com
XXLA1 2.3.6 Open Germany i9100G
http://www.hotfile.com/dl/147226259/a5d1655/I9100GXXLA1_I9100GDBTKL2_DBT.zip.html
---------- Post added at 03:05 AM ---------- Previous post was at 02:50 AM ----------
Bazilla said:
The real question I have is which is the correct ROM to download? There is such a lot of information that I am totally confused now.
On all the posts I've seen so far the one to download for South Africa could be many different versions. What is the relevance of this information?
XWKI4
Firmware info
PDA:XWKI4
PHONE: XXKI1
Date: 14/09/2011
Android 2.3.4
What information do I use to determine the correct version of file to download. I am completely confused by the mass of information available, especially considering my phone is currently running what I assume to be XXKI3 which is non south african.
Could it be that my phone was originally purchased in Europe? If thisd is so should I be installing a version of ROM for that region or will any region do?
Click to expand...
Click to collapse
Download this stock ROM.Possibly no password but as I posted before if it asks for one try samfirmware.com or samsung-firmwares.com
http://hotfile.com/dl/145847543/170c2ed/I9100XWKI4_I9100OJCKI1_XFA.zip.html
This is a South African Firmware and although its 2.3.4 it contains the regional info (CSC) that you need to make it stable.Dont forget to do a factory reset after flashing.
I want to update my phone by samsung kies but i can't cause i have modded system. Can u tell me how can i turn back changes and make my phone stock? I want to have my SGSII like right from the store. Help.
coolstory said:
I want to update my phone by samsung kies but i can't cause i have modded system. Can u tell me how can i turn back changes and make my phone stock? I want to have my SGSII like right from the store. Help.
Click to expand...
Click to collapse
Let's start here.
Your profile says "T-Mobile", with a US flag. So are you sure you are an I9100 user? Or do you actually have an SGH-T989, which is the T-Mobile USA variant of Galaxy SII?
FYI, this is the I9100 forum, which is a completely different model of phone than the T-Mobile USA variant.
I'm form poland and i'm in t-mobile. And i'm sure i have SGH-I9100 -.- And i want to make phone stock to kies compatibile with it.
coolstory said:
I'm form poland and i'm in t-mobile. And i'm sure i have SGH-I9100 -.- And i want to make phone stock to kies compatibile with it.
Click to expand...
Click to collapse
Ah, good, you changed your flag.
Unfortunately, a lot of the links in Intratech's thread are for multiupload, which has been shut down.
However, you should be able to download a stock firmware for Poland from samfirmware.com. Flash that, and you should be good to go.
ok ill try
By the way - I hope you meant "GT-I9100"... as there is no such model as "SGH-I9100".
I downloaded from that site the newest rom for my country and kies says my device isn't operating kies update.
ctomgee said:
By the way - I hope you meant "GT-I9100"... as there is no such model as "SGH-I9100".
Click to expand...
Click to collapse
IT's SGSII I9100 omg
coolstory said:
I downloaded from that site the newest rom for my country and kies says my device isn't operating kies update.
Click to expand...
Click to collapse
Which one? I'm not good at guessing.
GT-I9100 I9100XXLPQ Android 4.0.3 2012 March I9100OXALPQ Poland from this site:
http://www.sammobile.com/firmware/?page=3
coolstory said:
GT-I9100 I9100XXLPQ Android 4.0.3 2012 March I9100OXALPQ Poland from this site:
http://www.sammobile.com/firmware/?page=3
Click to expand...
Click to collapse
So you flashed an ICS firmware (4.0.3) already. Flash to a 2.3.6 firmware if your want Kies to update it to ICS for you.
ok ill try
So if i have current version (ICS) this is the same as i would update it by kies ?
coolstory said:
IT's SGSII I9100 omg
Click to expand...
Click to collapse
*sigh*
My point here, was you have to be precise on model numbers.
GT-I9100 is not the same as GT-I9100G, is not the same as GT-I9100P, is not the same as GT-I9100T.
I9100G cannot use the same firmwares as any of the other three.
I9100P can use I9100 firmwares, but will lose NFC if you do (unless you re-enable it via a mod)
I9100T can use I9100 firmwares, but will probably have to flash a modem optimized for Tesltra to get good signal afterwards.
If you start telling people you have an "SGH-I9100", no one will know what you have, or be able to help you.
coolstory said:
So if i have current version (ICS) this is the same as i would update it by kies ?
Click to expand...
Click to collapse
Probably, yes.
ok sorry and thx for help
coolstory said:
IT's SGSII I9100 omg
Click to expand...
Click to collapse
......facepalm.
Can't you use the CheckFUS downloader to get the latest "stock" firmware for your region and model?
coolstory said:
So if i have current version (ICS) this is the same as i would update it by kies ?
Click to expand...
Click to collapse
Yes to this, most likely
If you have Galaxy S2 I9100 (International Version) you can flash it via ODIN.
Okay so long story short I was stuck in bootloop so I restored my phone back to like 3 months ago and now when I try to upgrade it back to ICS from 2.3.6 in Kies it says I cant it gives this error:
Your device does not support software upgrading via Kies.
Current fireware version : I9100XWKI4/I900XEUKH2/I9100XXLPS/I9100XWKI4 (XEU)
Please help and tell me what I must do I am so lost
Really no one knows?!?!?! Here is some more info if it helps...
GT-I9100
2.3.4
I9100XXLPS
2.6.35.7-I9100XWKI4-CL575468
[email protected] #2
GINGERBREAD.XWKI4
*#1234#
See what you get
I think you will get Lps in phone which is modem.
Just flash the stock modem back and you will get kies working.
Sent from my GT-I9100 using Tapatalk 2
atifsh said:
*#1234#
See what you get
I think you will get Lps in phone which is modem.
Just flash the stock modem back and you will get kies working.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
PDA : I9100XWKI4
PHONE : I9100XXLPS
CSC : I9100XEUKH2
Yeap you were right so which do I flash it to can you give me a link please? I been download one for about an hour now and im scared its the wrong one the file name is: I9100UMKK1_I9100TCEKK1_TCE
Yes wrong
You have to correct modem via Odin and use kies or you can flash the stock Ics whole ROM via Odin, time saving
Sent from my GT-I9100
atifsh said:
Yes wrong
You have to correct modem via Odin and use kies or you can flash the stock Ics whole ROM via Odin, time saving
Sent from my GT-I9100
Click to expand...
Click to collapse
You lost me there LOL how can I fix the modem via Odin? I would also like to upgrade to ICS via Kies since the downloads are so slow over here via Kies would be a lot faster, I download at 350kbs but when I download the full files for use with Odin it only goes at 50kbs soooooo how can I fix the modem? I am downloading a firmware flash will that fix it all?
Just get the UK ICS from Sammobile and flash using Odin. Or use checkfus download.
or wait one hour, I'll post some links, on the move now
Sent from my GT-I9100
Well my phone is the international version so I really don't know which one to chose from sammobile.com :/ The only UK version without a carrier in parenthesis is: I9100XWLP7 4.0.3 2012 April I9100XEULP5 United Kingdom / Ireland
m8 jus download modem frm modem collection and flash it or use cwm ...its simple as tht.or roll back one step behind frm current firmware an then everything is stock again....cheeeerz
Link please for the modem collection? Also explain which one to use please I don't want to screw my phone up anymore then it already is :/
ANOTHER THING!!! ... I live in Dominican Republic, so if I use Check Fus and download the Dominican Republic one can I flash it and it will all change to DR and work again via Kies to upgrade to ICS? Sorry I'm such a noob
atifsh said:
Just get the UK ICS from Sammobile and flash using Odin. Or use checkfus download.
or wait one hour, I'll post some links, on the move now
Sent from my GT-I9100
Click to expand...
Click to collapse
Its been an hour, I NEED YOUUUUUUU!!! LOL You're the only one who helps me! LOL I'm a little impatient sometimes xD
Griingo said:
Its been an hour, I NEED YOUUUUUUU!!! LOL You're the only one who helps me! LOL I'm a little impatient sometimes xD
Click to expand...
Click to collapse
wat u want modem (gb) or ics ?
rocky23 said:
wat u want modem (gb) or ics ?
Click to expand...
Click to collapse
I'm a noob I have no idea I just want my phone to work with Kies again
EDIT: Ignore what I just said, I need it for GB 2.3.4 thats what I have now
Griingo said:
EDIT: Ignore what I just said, I need it for GB 2.3.4 thats what I have now
Click to expand...
Click to collapse
http://skywanker.net/download/downl...9100_XEU_I9100XWKI4_I9100XEUKH2_I9100XXKI1.7z download i think its 3 file pakage ,if yes then jus flash the modem in pda in odin....
1: if you want to save something save it on pc or external sdcard
2: dial *2767*3855# it will wipe your phone to factory defaults
3: learn how to use odin
4: download that ICS file uk/ireland thats fine
5: using odin flash it will be fine and you get ICS stock
6: after reboot dial that code again
http://forum.xda-developers.com/showthread.php?t=1544487
you can use sammobile and checkfus
you can flash any rom for i9100 it will work
you dont waste your time for finding modem and flashing when at the end you want ICS.
atifsh said:
1: if you want to save something save it on pc or external sdcard
2: dial *2767*3855# it will wipe your phone to factory defaults
3: learn how to use odin
4: download that ICS file uk/ireland thats fine
5: using odin flash it will be fine and you get ICS stock
6: after reboot dial that code again
http://forum.xda-developers.com/showthread.php?t=1544487
you can use sammobile and checkfus
you can flash any rom for i9100 it will work
you dont waste your time for finding modem and flashing when at the end you want ICS.
Click to expand...
Click to collapse
Okay I wiped it, so anything from checkfus will work? I can download any of themM
Griingo said:
Okay I wiped it, so anything from checkfus will work? I can download any of themM
Click to expand...
Click to collapse
yes as far its for i9100
atifsh said:
yes as far its for i9100
Click to expand...
Click to collapse
Okay well I am going to download one from that thread link you gave me the one that says:
I9100XWLP7 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP7 (4.0.3)
Region United Kingdom / Ireland
Carrier: SIM FREE (Generic)
Build Date: 3rd April 2012
Modem: XXLPS
CSC: XEULP5 (XEU)
Change List: 340913
CF-Root v5.4 LP7: Download
Because it has no carrier it is XXLPS and XEU exactly what I have, THANKS!!! I hope this works I'll let you know after it downloads, unless you have a hotfile account I could use to download it instantly?