[Q] [Really Need Help] Xperia Neo would not start, only shows "sony ericsson" :(
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Your phone's boot loader unlocked or not & if yes what method?(s1tool,official SE or setool2 paid) ? Here's a good tutorial about flashtool.
lilbunnyf said:
Hi guys, I am new to this forum and a new smartphone user.
Last night I was updating my phone through PC companion, but the software dies half way for some unknown reason. Since then I could not turn on my phone.. It will only vibrates, shows "Sony Ericsson", and then an image of yellow triangle with an exclamation mark shows up, then it is turned off again. I tried charging, restarting my pc companion software to try to update my phone, but none of them work.
I saw some threads here and it seems that there are possible solutions, but because the terminology is quite strange to me I could not fully understand what I have to do What is a flashtool and SEUS? I tried to search them up on the net but the downloads seem to be unavailable?? I must be missing something here.
If anyone can help me with simple terminology I will really really appreciate it.. Thanks a lot!
Click to expand...
Click to collapse
Hi,
This is my suggestion:
first download FlashTool_0.2.9.1_FOTAUnbrick
http://forum.xda-developers.com/showthread.php?t=1126358
Follow instructions (if u familiar with updating with sony ericsson pc companion, this u can do)
Simple, start FlashTool_0.2.9.1_FOTAUnbrick, click flash. Choose loader.sin on the right. Then click OK,
Turn of phone, hold in back button while connect phone with usb cable.
See its flashing, wait til its done, unplug phone,. try to boot up phone.
I am also a newbie, but this worked for me
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
emailprashanthvg said:
pls give me a link to download SEUS, for xperia neo pls. pls help I am having the same problem pls help,
Click to expand...
Click to collapse
Try: http://dl-www.sonyericsson.com/cws/download/1/110/61/1323075336/Update_Service_Setup-2.11.12.5.exe
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Thank you guys! My phone is finally working again!
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Good! Enjoy your neo!
abhinav333 said:
Guys dont panic if you bricked your phone go through the Xperia neo Forums and im sure you can unbrick your phone i have bricked my phone 2 times and i was able to unbrick !
http://forum.xda-developers.com/show....php?t=1126358 ...even i suggest this page because this is were i was able to unbrick my phone successfully !
Click to expand...
Click to collapse
I don't think link is right mate, 404 page not found
Anyway @lilbunnyf if your phones boot loader is unlocked using s1tool method do not use seus or pc companion.As I read in forum this can brick your phone.Try flashtool.If you got a locked boot loader or patched one with setool2 then you can use pc companion(this thing saved my phone like 5-6 times now after kinda bricking it with roms kudos se for this xD)
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
oh xD didn't saw this,Good
lilbunnyf said:
Thank you guys! My phone is finally working again!
Click to expand...
Click to collapse
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
LOL so your are ready to brick your phone !
dioggo92 said:
Tell us how did you unbrick it, maybe in future someone will have the same problem as you
Click to expand...
Click to collapse
Most likely the post #3. That should help.
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
I managed to get stuck in a boot loop today. I have a locked bootloader and SEUS did the job, so I guess that is the best solution for the problem mentioned by OP.
JOeYJAcX said:
I have the same problem...
but mine already unlock using s1tool, rooted using zergexploit and using cwm...
i wanted to install se tweak so i use cwm the installation is complete after rebooting my phone is bricked... so please... im begging help me...
i've tried using flashtool to reflash to stock but i cant get my phone connected... it seems i cant go to fastboot mode...
Click to expand...
Click to collapse
Since you unlock it via s1tool, you should still be able to use SEUS.
Anw, why fastboot mode? Have you tried to connect it in flashmode?
Related
Hi everybody
I need help for my friends xperia x10.
I dont know a lot about Sony Ericsson because im using Samsung Galaxy S.
This xperia x10 was with firmware 1.6 and he tried to upgrade to 2.1. After upgrade he had a lot of problems whith the phone, actually the sound was not working for some days then according to my friend it didnt boot anymore.
The problem with the phone is like this: when you press the power button it vibrates and you can see only the black screen for few seconds. After that restarts and this repeats all the time. When i connect to pc it cant find the drivers.
Please if somebody can help me to solve this because in my country we dont have Sony Ericsson care center.
Thanks in advance and sorry for my bad english
Sent from my GT-I9000 using XDA App
Download SEUS and do a repair.
Sent from my X10project using XDA Premium App
realunited123 said:
Download SEUS and do a repair.
Sent from my X10project using XDA Premium App
Click to expand...
Click to collapse
I used SEUS and updated to 2.2 but i have again the same problem, it keep restarting. I cant get even the boot animation or logo. Anyway thanks for trying to help
cipiculla said:
I used SEUS and updated to 2.2 but i have again the same problem, it keep restarting. I cant get even the boot animation or logo. Anyway thanks for trying to help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928343
rendeiro2005 said:
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thanks for the help but this didnt work too
During the flash I dont get the pop up message and in the end of the flash i get this lines
INFO - Flashing finished.
INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging
After i turn the phone on it repeats again the same thing. It does'nt display anything just after few seconds it restarts again and again, all the time.
Please if somebody can help me. I just want to know if it can be repaired or not, or is it maybe any hardware problem!!!
if SEUS, PCCompanion or flashtool can´t do the job you may have some hardware issues. in that case, if you have warranty still valid, use it.
cipiculla said:
Thanks for the help but this didnt work too
During the flash I dont get the pop up message and in the end of the flash i get this lines
INFO - Flashing finished.
INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging
After i turn the phone on it repeats again the same thing. It does'nt display anything just after few seconds it restarts again and again, all the time.
Please if somebody can help me. I just want to know if it can be repaired or not, or is it maybe any hardware problem!!!
Click to expand...
Click to collapse
Here is an even more specific step by step guide for AT&T noobs....
http://forum.xda-developers.com/showthread.php?t=1012380
Usually when the flash tool aborts like that, it is due to either a) battery isn't fully charged or b) there's a problem with the ftf file you downloaded. Try charging battery first and a new download of the ftf firmware.
hy i have an xperi x10 and i upgrade it whit the xperia mini firmware an now my phone freezes on startup and companion says tht i have the latest update and it wount do anything pls help !
wizzard_2009 said:
hy i have an xperi x10 and i upgrade it whit the xperia mini firmware an now my phone freezes on startup and companion says tht i have the latest update and it wount do anything pls help !
Click to expand...
Click to collapse
Have you tried to repair (not update) in PC companion ?
Have you tried with SEUS ?
wizzard_2009 said:
hy i have an xperi x10 and i upgrade it whit the xperia mini firmware an now my phone freezes on startup and companion says tht i have the latest update and it wount do anything pls help !
Click to expand...
Click to collapse
Why would you update it with an xperia mini firmware anyway?
No Xrecovery backup ?
I brick my phone x10 mini and it's now stuck in SE white written name. I searched in forum and I found few solutions. I try flash tool and we succeeded to re-flash , but still not working. There has been no change, the phone remains stuck . (sorry for my english , but I don't speak very good english)
TNX in advanced !
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
tnx very much. work perfect !
awpboss said:
tnx very much. work perfect !
Click to expand...
Click to collapse
A pleasure to have helped you out!
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Seus lol so easy but asked so much SEUS lol
TimmyHate said:
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
Can you give me the link for downloading SEUS that support X10 mini
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
sectorzero said:
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
Click to expand...
Click to collapse
Even with "ur phone is up to date" you r able to click on Repair button, that solves all your problems.
NOOB question!
albanezi said:
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
Click to expand...
Click to collapse
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
velo25 said:
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
Click to expand...
Click to collapse
Taking out the battery will put it off
In defense of the noobs around here i can't find the repair button n'or does SEUS give me the Install Anyway option. Have the latest SEUS and now i'm trying an older one hope it works, but for precaution can anybody post a link to an alternative flashing tool ? Much appreciated.
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
brimbi said:
Hi guys, i don't know how to solve a problem with my Sola. I read the recover soft-brick guide for xperia models but i can't solve it. I think i bricked.
When i try to turn on it's on Sony screen and there's nothing to do. I can use on flash mode and flash the kernel but the result is the same when i turn on. The led works like green in flash mode, or red when i finish the flash and the device is still connected. I have a locked bootloader, and all this happened when i wanted to restore a backup, i probably made a mistake: do a full wipe after that. I think that's is still in warranty, isnt' it? What can i do? There are some tips on the tutorial but i'm afraid to kill the battery or make other mistakes. Please help me guys.
And sorry for my bad english =(
Click to expand...
Click to collapse
Have you tried to flash a stock firmware with flashtool?
elia222 said:
Have you tried to flash a stock firmware with flashtool?
Click to expand...
Click to collapse
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
brimbi said:
Yes and flash is ok but when i turn on it's still on sony screen...i waited about 5 minutes. I tried with 6.1.1.B.1.54 and with 6.1.1.B.1.1.0 with same result. I know i have to wait after flash a stock firmware but i see it's too much time. Maybe because when i want to switch off i have to use hard reset (i mean with all 3 button). I don't know..thanks to reply in any case
Click to expand...
Click to collapse
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
elia222 said:
In any case, if you don't solve the issue by yourself, your phone is still in warranty (just don't say to the reparation service that you played with flashtool )
Click to expand...
Click to collapse
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
brimbi said:
Yep i hope. What can i do now? When i charge it turn on by itself and always on sony logo (but led is off)
Also when i flash and it's still on usb port the led is red but the device is off, i'm looking for a solution on RECOVER SOFT-brick thread but i don't know in which part am i.
Click to expand...
Click to collapse
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Try to start from the beginning, and follow the instructions carefully.
dotafan said:
You tried with the Sony PC Companion/Update Service? It uses flashmode.. When I bricked my U i had relocked my bootloader and flashed via PC Companion... Worked for me :fingers-crossed:
Press thanks if I helped:good:
Click to expand...
Click to collapse
But i have a locked bootloader, will i invalidate warranty? i'm going to try with pc companion =)
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
It works!!!!!!!!
dotafan said:
No it won't!!
If you were on a custom rom flash kernel/ftf via flashtool nd then use PC Companion:thumbup:
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
It works! My sola works now! Thank you guys! Thank you very much!
brimbi said:
It works! My sola works now! Thank you guys! Thank you very much!
Click to expand...
Click to collapse
Glad I could help :good: