Related
I have a GTab runn Vegan 5.1 and it runs great. The one issue that I have is that my Wifi gets disabled each night when it goes to sleep. When I say "disabled" I do not mean this it disconnect, but rather that something is actually putting it into a "Disabled" state and I must select the connection and choose to enable it.
Does anyone have any thoughts on what could be doing this? I have dug through every setting I can think of and also looked at any apps that might be doing this. I even went so far as to remove all my battery saving apps, but no dice.
Any suggestions?
kmclaren said:
I have a GTab runn Vegan 5.1 and it runs great. The one issue that I have is that my Wifi gets disabled each night when it goes to sleep. When I say "disabled" I do not mean this it disconnect, but rather that something is actually putting it into a "Disabled" state and I must select the connection and choose to enable it.
Does anyone have any thoughts on what could be doing this? I have dug through every setting I can think of and also looked at any apps that might be doing this. I even went so far as to remove all my battery saving apps, but no dice.
Any suggestions?
Click to expand...
Click to collapse
Settings - Wireless - Wireless Settings - (Press Soft Menu Button, you will see Scan and Advanced buttons popup) - Advanced - Wifi Sleep Policy - Never
Still getting Wifi disabled...
MasterColdSoul said:
Settings - Wireless - Wireless Settings - (Press Soft Menu Button, you will see Scan and Advanced buttons popup) - Advanced - Wifi Sleep Policy - Never
Click to expand...
Click to collapse
Have the sleep policy set at never and this does not change anything. From what I understand this setting will disconnect wifi when the device goes to sleep. In my case the connection is not disconnected but rather completely disabled. So it seems that there is some other thing disabling the connection.
So, to give a bit more info here, I have installed wifi keep alive to try and save the connection. This keeps the wifi from being disabled when it is plugged in, but it still gets disabled when it sleeps and is also unplugged. (I.e. on battery and sleeping)
So, I am starting to think that the setting that fixes the problem while pluggedin is settings / applications / development / stay awake. I have this turned on and it seems that with stay awake and the wifi keep alive I am good when plugged in.
So, does anyone have thoughts for a similar setting when on battery power?
I can't help to much with battery power since I almost always have mine plugged in.
It's odd that not helping you, once I made that chance I stopped having my Wifi turn itself off (not sleep, off, and the tablet would need to be reset a lot).
Sorry that wasn't much help.
Having this problem as well. Anyone know how to fix?
If you notice other weird stuff happening in the future you may need to repartition your internal memory. Mine started with similar flubs and progressed to never remembering logins online. I had to login to xda every time I turned my device back on. Keep this in mind, about 30% of people need to reformat.
Sent from my Chromatic Magic using XDA Premium App
"WiFi stay alive" will help you!
Mantara said:
If you notice other weird stuff happening in the future you may need to repartition your internal memory. Mine started with similar flubs and progressed to never remembering logins online. I had to login to xda every time I turned my device back on. Keep this in mind, about 30% of people need to reformat.
Sent from my Chromatic Magic using XDA Premium App
Click to expand...
Click to collapse
can you give some info as to how one would go about doing this?
For what its worth, might help to set a fixed IP address. I often got a problem with Wifi not being able to reconnect because it got stuck on "getting an IP address" and failed to do so. I seem to remember it disabled the connexion to that AP after too many tries on my Nexus One.
On my g tablet, I was having what seemed to be the same problem, so I did the same thing and it seems stable since. Granted I didn't toy with it as much as I did on the N1, but I wouldn't be supprised if it were a general Android problem.
Anyways, its free to try.
The wireless uses a lot of power. When the tablet "sleeps", it should go into a power saving mode. Disabling the wireless is a feature, not a bug.
Either way how can I keep the wifi signal on so when i wake my g tab up the wifi is ready to go and does not have to reconnect?
anyone have anything to help with this?
I am not sure, but it seems to me that downloaded apps can play with wifi this way, as long as they have rights to "access internet, modify and bla-bla-bla".
I am having same problem after sleep. And it was not present from the beginning. It may starts after I upload some app. I will play with this after coming back home.
yes please let us know thank you!
wasserkapf said:
The wireless uses a lot of power. When the tablet "sleeps", it should go into a power saving mode. Disabling the wireless is a feature, not a bug.
Click to expand...
Click to collapse
When my tablet is plugged in and it goes to sleep, the Wifi also disconnects, so I don't think this is a feature any more than the screen angle issue is a "privacy feature." I've never had an Android device that powered down connectivity when the screen goes off, that totally negates the notification features. You basically have a comatose tablet after a few minutes of the screen being off.
I don't think the Xoom or Galaxy Tab have this problem, so there's definitely an issue. Sadly, I might be sending mine back to TigerDirect as faulty because of this.
I have this problem too. As others have said, the problem isnt that the wifi turns off when the tablet sleeps. The problem is the last connected access point gets disabled so when you wake, you have to go into settings and tell it to connect again.
In my case, it happens most of the time, but not always. My Android phone doesnt have this problem.
I did a factory reset, then used nvFlash to restore, and then did a fresh install of Vegan (thought it did the same on every other 2.2 ROM I tried). I didn't install any apps, and the problem still occurs. Tried using Wifi Fixer, and the problem still occurs (though on the bright side, it does reconnect about 10 seconds or so after waking).
I'm out of ideas. I hate to send this thing back because it's the most fun piece of tech I've had in years, but a comatose Android device is a dealbreaker Going to try a GB ROM, and then I give up.
I've got the same kind of issue. I lose my PSA key in my wireless settings every time and have to re-enter it.
I installed the Vegan GB ROM (along with pershoot's kernel), and the wifi stays on if you choose "Never" for wifi sleep (you have to hit the menu button and choose "Advanced" when you're in the wifi settings). Only problem is, the GB ROMs, while zippy, are a little raw right now, and my Launcher Pro GMail widget doesn't work
I'm going to try one of the 2.2 ROMs again today along with pershoot's Froyo kernel to see if it makes a difference.
Ok, YMMV, but I am using Calkukin's ROM with pershoot's kernel (was using Clemsyn's before), with wifi set to never sleep, and my wifi doesn't sleep any more. I left my phone and tab here at work while I went out for lunch (felt naked ...), and came back about 45 mins later, woke the tab, and wifi was still connected, without that "looks connected, oh the icon is now disconnected, oh it's back again!" bit.
I still receive notifications and email, and widgets update. Guess I'm keeping it
I enabled the option under Development to never turn off the screen when plugged in, so now instead of shutting off, it dims. Has anyone found a way to make the screen stay at useful brightness when plugged in but still shut down automatically when on battery? There are ways to make it stay on all the time, but those defeat the auto shutdown.
I used to use an app that was called StayAwake, but for some reason I can't access it anymore on the market. It keeps telling me it is already installed so I can't reinstall it. But it does what you are asking.
xilpaxim said:
I used to use an app that was called StayAwake, but for some reason I can't access it anymore on the market. It keeps telling me it is already installed so I can't reinstall it. But it does what you are asking.
Click to expand...
Click to collapse
I have that happen a lot. It only happens when browsing the market on a PC. The market remembers what you have downloaded. If you go to it from your phone it should work okay.
The Market said that the one you recommended is not approved for the Streak but thanks to the suggestion I found a neat little widget that puts the option on the desktop. It is just the word "Never" and when it is disabled there is a line through it.
"Screen Timeout Toggle".
Maybe I just recently noticed, but i cant remember it doing this before:
does everyones tab turn its wifi off when it goes on "standby" ie: the screen turns off? I don't remember it doing this before, i am stock, unrooted.
Everytime i press the power button to see the time or to do something, i notice that at the bottom tray it says no internet connection, but almost as quickly as I slide to unlock my wifi is restored. I have my tab next to me most of the day while I work on my computer, and rely on it to use gtalk, but if it turns wifi off, then I don't get notifications
is there a setting that i have checked or something? I have power saver off.
thank!
Go into your wifi settings, then go into wifi sleep policy, you can change it in there, having the wifi sleep with the screen off will save battery though, so unless you need constant updates or polling for apps I would leave it the way it is
thanks man, didn't see that setting. I am usally plugged in durign the day so setting it to never when pluggin in is exactly what i was looking for.
jaoropez said:
thanks man, didn't see that setting. I am usally plugged in durign the day so setting it to never when pluggin in is exactly what i was looking for.
Click to expand...
Click to collapse
Glad to help
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off) - UPDATE: I see now this one will not work in the HC OS as the system requires user interaction to set GPS
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Never heard of that but it sounds like an awesome app
Sent from my Transformer Prime TF201 using xda premium
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Haven't gotten my Prime yet, but that Tasker app sounds pretty cool. It sound kind of like JuiceDefender, except there's a lot more options.
With those settings, what kind of Battery life do you get?
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Lock-N-Load said:
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Click to expand...
Click to collapse
That's epic.
Sent from my Transformer Prime TF201 using xda premium
Tasker is pretty awesome!
A bit of a learning curve, but once you figure it out, the sky is the limit.
I have a profile that if I receive a text while driving, it autoresponds telling the person texting and driving is dangerous and I am currently driving at xx MPH and will get with them later.
I get a lot of people inquiring about that one.
The most useful one I have is it looks at my calendar and if it is during the time of my meeting, it automatically puts my phone on vibrate. That way I don't have to worry about it. When meeting is over, it reverts back to normal.
Yes, tasker is INCREDIBLE. Once you figure it out, it can almost double your battery life (at least it did on my phone).
You can try reddit.com/r/tasker, where most people post awesome tasker profiles and ask for help accomplishing certain settings. There are also a ton on the internet if you google search for tasker set-ups:
http://tasker.wikidot.com/profile-index (this is a great one)
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Tasker is one of the defining differences between ios and Android. Really shows off how powerful android can really be if you're willing to take the time
OP wanna post your profiles? And maybe a quick writeup (or link) how to apply them for those who dont know...
I used to use tasker for BLN to enable notifications from various apps that normally didnt work with BLN, as well as making my phone vibrate every minute or so if theres a missed notification (text, etc) for aprox 5 minutes just so that way if i was with a customer at work (retail) i could deal with the customer but wouldnt forget about the messages i got
Awesome app indeed.
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
Put a small SD card in the dock. Have Tasker check when it mounts/unmounts.
Might not work since there's no notification on unmounting /Removable/SD. Maybe have it check for access to /Removable/SD every X minutes?
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
if you are rooted, keyboard manager is a free app in the market that does this. when im not docked, i gvet thumb keyboard 4. when i am docked, asus stock. hasnt failed me yet
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
I have 4 profiles that I copied from my phone to do the same tasks:
Home: When near my Home wi-fi AP, turn on wi-fi. When no longer near the AP, turn off wi-fi.
Sleep Mode: Put device on silent, turn on airplane mode (11PM-5AM).
Work Location: When near my office wi-fi, turn on wi-fi, turn on silent mode. When no longer near the AP (i.e. not at work), turn off wi-fi, turn off silent mode off.
Work Timer: During work days/hours (M-F 6-3), turn silent mode on. After work hours, turn silent mode off. Exception: if there's an event with a description of "Vacation" on the calendar. If that exists, device does not go into silent mode.
There are others that I use on my phone.
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
BRILLIANT! I have actually seen no use for tasker for myself til now. I've always REALLY liked he concept, but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
stretchwookie said:
but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
Click to expand...
Click to collapse
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Lock-N-Load said:
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Click to expand...
Click to collapse
i understand how powerful this tool can and is. but i shut my prime off at night... there is no battery to conserve... lol sorry. im glad it works for you guys though! it REALLY may be worth investing the money into though JUST for microsd unmount alerts.
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Lock-N-Load said:
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Click to expand...
Click to collapse
i believe you are correct. but i am not very imaginative. so its very possible that i cant just find a use for it, doesnt meant that it isnt there. i plan on doing some research into some of the already made profiles to see if someone interests me. so far, the unmount microsd seems to be the only plausible for me
Not sure how I missed this thread before; I'm a huge fan of Tasker. All of what follows was written for my Samsung Epic 4G: I don't even have Tasker installed on my TFP because so much of what I do is smartphone-focused. Sooner or later I'll get around to putting together some tablet-specific scripts.
Surreptitiously snaps a photo from the front-facing camera every time the screen is unlocked, with no visual or audio indication. This is set up so as to always keep the last 2 photos stored, and will overwrite older photos. Images can be retrieved remotely via a secret text message.
Set up secret text messages that trigger the phone to gather information such as GPS location (reverse geocoded to an address), speed, heading, altitude, local cell tower ID and signal strength, nearby and connected WiFi SSIDs, WAN IP, currently open app, whether the screen is turned on, battery strength, and covert photographs taken from the front and rear cameras (including the one that was captured from the front camera when the screen was last unlocked) and text/email me back without notifying whomever has the phone. Another message will make my phone freak out, announce it's been stolen, announce that all of the above information has been sent to the owner of the phone, flash the LED in an SOS, and force all outbound calls to go to me.
If I send a secret message to my phone, it calls me back, and enables speakerphone, so I can speak with whomever has my phone. It also reroutes any outbound calls to my number. I can also ask it to send me photos from the front and rear cameras on the phone.
Ensured that when the phone is connected to my home's local cell tower, it always rings when I call it. I never have to worry about it being on vibrate while under a couch cushion or in a snowbank next to the driveway.
When I plug in a headset or it connects to my car's bluetooth, it pops up a list of media applications for me to use, and if I don't select one or back out of the selection, it automatically starts my Pandora, and kills the app when I unplug / disconnect. Basically, I get in my car, my music plays. I get out, it stops. Same with headphones.
When it detects the cell tower near my work, it enables vibrate.
If it detects a cell tower that is not the one near my home or work, it turns on the ringer and disables WiFi (unless I re-enable it).
If someone calls me that I don't even want a voicemail from, I add their number to a list in Tasker, and when they call me, it picks up the line and immediately hangs it up. Working on one that will play back a fake "Your call could not be completed as dialed" message.
Checks accuweather.com in the morning on work days to see if it's raining, snowing, sleeting, or hailing. If any of the above, it rings an alarm 30 minutes early. I also built in snooze functions and a voice notification in the morning about the outside temperature and conditions. This script recently broke (accuweather probably did something to affect the output of my HTTPGet) so I've been using the voice notification in Alarm Clock Plus, though it doesn't wake me up early. With current weather conditions I'm going to have to get my script fixed for the head start. My how-to on this script is on Tasker's wiki, here: http://tasker.wikidot.com/weather-clock
If I start Google Navigation with GPS disabled, it closes the app, enables GPS, and starts the app back up again. No more fiddling with GPS settings while on the go. Sometimes this script is not 100% reliable... I've got to look at it again some time to figure out why.
I made a blog post a while back about how to take the pictures remotely with the camera, and you can read about it here:
http://sean-the-electrofreak.blogspot.com/2011/10/more-fun-with-tasker-covert-mugshots.html
The email-attachment part can also be used to send audio recordings, which I've not actually implemented yet but wouldn't be difficult.
I've been putting off for the last 6 months or so my write-up on all the rest... I just have to find time for it!
now this may be a dumb question since i don't consider myself new to android, i've changed three android tablets so far, rooted my phone, installed and tweaked dozen of roms on it, so i know some relativelly average things about android, but this one puzzles me:
on both my tablet and phone i have facebook and gmail applications. they are basically the same .apks since i have a backup of them on a sd card and if i format one device, i often use restire the apps from the sd card.
and you know how you get an instant notification on your phone if you receive a fb message or an e-mail? that doesn't happen on my tablet. it seems that a couple of minutes after i turn off the display on my tablet, it drops the wifi connection (a power save thing i suppose).
is there any way to ensure a constant wifi connection on my tablet so that i receive email/fb notifications in real time and just not after i turn the display on?
this may be only an unchecked box in my network settings, but i really haven't noticed it
thanks for your help on advance
Sent from my PMP5570C using Tapatalk HD
Go to Settings > Wireless & network settings > Press Menu > Advanced, and change Wi-Fi sleep policy to Never (or Never when plugged in, to avoid drain your battery)
thank you! i'll try to keep it turned on constantly, and see what the battery drain will be
Sent from my PMP5570C using Tapatalk HD
noup... i gave up after a few days... the battery drain is too big... even when it's pluged in, the charging process takes a lot since i'm almost constantly using it, in such a case, it almost doesn't charge
Sent from my PMP5570C using Tapatalk HD
Have u tried using tasker?
U can use that app to like turn on Wi-Fi every half hour for a minute or so to check for notifications, and then turn off.
All automated
no, but that's an excellent idea! thank you for the suggestion! will install it and give it a try
Sent from my PMP5570C using Tapatalk HD
hey... i need help with tasker... i seem to have programmed it to connect to wifi every 30 minutes, to check facebook, gmail and tapatalk, and the profile is on, according to on/off switch in tasker itself. but when i check notification icon, it says "no active" profiles.
also, i would like to write you how my profile looks like, but i don't know how i realize that tasker is a powerful app, with a lot of options, but they seem so complicated when trying to adjust them. :/
Sent from my PMP5570C using Tapatalk HD
Hmm...first try installing tasker as a system app and see if that fixes it. Also check accessibility settings as it may be listed there.
If the above doesn't work then it may be a problem with your profile.
Nbsss said:
Hmm...first try installing tasker as a system app and see if that fixes it. Also check accessibility settings as it may be listed there.
If the above doesn't work then it may be a problem with your profile.
Click to expand...
Click to collapse
well the problem with your first solution is that my tablet isn't roited so i can't install tasker in system/app, the other is that it might be a problem with my profile, but i realy don't know how to set it up... i mean, i tried, and i think it's good, but it doesn't have to be good. that's why i needed help in the first place
Sent from my PMP5570C using Tapatalk HD