Related
Hi xda I just rooted my phone and im going to unlock my boatloader but I was reading when I update sbf my phone gets deactivated and o have to call sprint.? Can I do it online. Sorry guys its my first motorla phone im coming from an htc phone. And I mostly flash at night time cause that's when I have time to do it plus sprint is closed during night lol.
Thanks fellow xda conrads.!
Sent from my MB855 using XDA App
Most of the time hands free activation kicks in and does it for you has been my experience with it
Sent from my MB855 using xda premium
Most of the time, yea. Butwhen I installed stock sbf, my phone was not activating, tried reboots, battery pulls, and nothing, then I went to about phone aand seen that my phone number was not what it should be, so that's why the phone doesn't go throught hands free activation. I ended up calling sprint, they fixed it, but they asked if anything was messed with the phone , ofcorse I said "no" lol. Just say you haven't been able to make calls or receive, they'll go through the activation process with you.
Sent from my Mopho Cm7.2
I also don't see why you wouldn't be able to do it online. I didn't try that, . Lol
Sent from my Mopho Cm7.2
Now I get it lol.! Thanks guys for the answer now im going to go unlock.! Tired of stock lol im a flash cracker.!
Sent from my MB855 using XDA App
what i did was i called but that took me a good 15 minutes so the next time i flashed to stock i took a screenshot of the activation number and what number you have to dial to activate your phone so you can do it by yourself
I wrote my info somewrre, but I lost it, so when I do, if I have to go back to stock, ill probably have to call again unless you can tell me what's the number you have to type in the phone dialer, I can get all the other info from my about phone..
Sent from my Mopho Cm7.2
Wait what? I just went to unlocked CM 7.2 and have had no issues calling/txting etc. Are you guys saying it'll be a problem if I try to switch back to stock?
When I was having problems with my photon, I followed qbkings unbrick video, returning to stock via RSD lite, sbf. Yes it fixed my problems but phone wouldn't activate, that's when I checked on about phone, and phone number did not match, so I had to call sprint. Its not a major problem but yeah it didn't hand free activate for me.
Sent from my Mopho Cm7.2
But if you made a backup of stock, beforeyou flashed, then you can just run the restore, it will restore stock/or whatever ROM you were on without this problem, I think its only when flashing stock thru RSD lite.
Sent from my Mopho Cm7.2
Verizon is sending out replacement phone and need to restore this to stock.
This also started prior to flashing the new ICS leak and after dling ~600mb's via wireless tether.
Not sure if something burned up.
Phone is stuck on 1X only. Tried everything and can't get 3g or reliable 4g.
It get's 4G but only a minute at a time.
I tried doing the various "Fix network bootloop 1x issue threads" but still a no go.
Phone doesn't take the CDMA only option under Mobile networks, it resets back to to lte/cdma.
It never drops to 3g.
I dled the RUU but it does not update nor recover.
Any ideas?
Thanks!
Flash the stock Rom from scrosler's website.
www.scottsroms.com
Droidel said:
Verizon is sending out replacement phone and need to restore this to stock.
This also started prior to flashing the new ICS leak and after dling ~600mb's via wireless tether.
Not sure if something burned up.
Phone is stuck on 1X only. Tried everything and can't get 3g or reliable 4g.
It get's 4G but only a minute at a time.
I tried doing the various "Fix network bootloop 1x issue threads" but still a no go.
Phone doesn't take the CDMA only option under Mobile networks, it resets back to to lte/cdma.
It never drops to 3g.
I dled the RUU but it does not update nor recover.
Any ideas?
Thanks!
Click to expand...
Click to collapse
First thing I'm thinking is you can't RUU back in your situation because the version number is higher than the old RUU. My suggestion is to ROM it, and then flash back to stock RUU, because most ROMs set the version number to 1.0.0.0, therefore all RUU's are a higher version number. Then when you go to flash it, it will recognize, read and flash.
On a side note form this, you're pretty much screwed if you're trying to go to stock from something ripped, since your bootloader will show relocked or tampered, or something other than 'locked' as it shows when completely stock out of the box. This is of course unless you never unlocked it, which means you cant change version numbers, which means you're screwed either way.
Verizon will be able to look at your bootloader and know that it isnt factory stock, so chances are, they are going to charge you for your phone. I'm just trying to be honest and upfront, since I'm kind of a realist when it comes to getting screwed by big corporations like Verizon.
Good luck getting it back to an older version though.
p.s. on the note of your signal issue... the back is on the phone, right? Did you check the contacts inside the cover?
poppajules said:
First thing I'm thinking is you can't RUU back in your situation because the version number is higher than the old RUU. My suggestion is to ROM it, and then flash back to stock RUU, because most ROMs set the version number to 1.0.0.0, therefore all RUU's are a higher version number. Then when you go to flash it, it will recognize, read and flash.
On a side note form this, you're pretty much screwed if you're trying to go to stock from something ripped, since your bootloader will show relocked or tampered, or something other than 'locked' as it shows when completely stock out of the box. This is of course unless you never unlocked it, which means you cant change version numbers, which means you're screwed either way.
Verizon will be able to look at your bootloader and know that it isnt factory stock, so chances are, they are going to charge you for your phone. I'm just trying to be honest and upfront, since I'm kind of a realist when it comes to getting screwed by big corporations like Verizon.
Good luck getting it back to an older version though.
p.s. on the note of your signal issue... the back is on the phone, right? Did you check the contacts inside the cover?
Click to expand...
Click to collapse
The contacts are fine. what if the phone bricked during a software update in hboot? Can they still see relocked and tampered?
Some say that vz doesnt care as long as it has no physical damage.
I don't know about Verizon not caring, but I highly doubt they would take back all of our rooted phones..
I doubt the phone bricked if it booted up. I would flash the ICS RUU and see if the radios fix your signal issue.
Like I said before, I am running Scott's CleamROM and it sets the software versions to 1.0.0.0, so any RUU will flash over it. This is your best bet.
If VZW doesn't care about the bootloader, then you're golden, but don't count on that.
If I may pry, why are you sending it back for the replacement? If it's because of the radios, then I really doubt they are going to just take the phone back, since you could have messed up software to cause the issue.
Just try flashing some stuff before you call it busted. I would go with the ICS leak, Scott's CleanROM, and then back to your old RUU if you want. There's also a patch you have to install to downgrade from CleanROM and ICS leak back to GB, so you might want to do research, also. If you need help finding stuff, just send me a PM.
p.s. Anyone can boot your phone to bootloader (unless of course your phone is in little tiny pieces all over the street), and see that the bootloader is unlocked, possibly tampered for the custom recovery installed, and even if you lock it again, it will say relocked, indicating to everyone that it has been unlocked at one point. 'Unlocked', 'Relocked', 'Tampered', and 'Security Warning' void certain parts of your warranty (in the words of HTC dev.com). The only thing that doesn't void it is if it reads 'Locked'. Period.
Some say that vz doesnt care as long as it has no physical damage.[/QUOTE] Dude I sent two Dinc2 back completed rooted with no problems. Most times the tech at big V. couldn't care less. Most don't wouldn't know what rooting is and the ones that do, more than likely are rooted themselves. The question is if they send it to HTC? And will it meet their requirment now that they have a record that you are rooted as I'm sure if you're had to go thru HTC to unlock. However in reading alot of cases noone have posted a problem with returning a rooted or relocked phone at lease none I've read about. Good luck tho as there's always that first time.
ghostt021 said:
Dude I sent two Dinc2 back completed rooted with no problems. Most times the tech at big V. couldn't care less. Most don't wouldn't know what rooting is and the ones that do, more than likely are rooted themselves. The question is if they send it to HTC? And will it meet their requirment now that they have a record that you are rooted as I'm sure if you're had to go thru HTC to unlock. However in reading alot of cases noone have posted a problem with returning a rooted or relocked phone at lease none I've read about. Good luck tho as there's always that first time.
Click to expand...
Click to collapse
Yeah, I've never tried to send a rooted phone back, personally, but I've never asked anyone at VZW about it. (I'm paranoid that SWAT will descend from the roof and take me down if they knew my phone was rooted)
Good luck dude, just box it up and ship it off then. 'F' 'em.
No go, reflashed ICS leak, the tamper and security warning are gone.
I don't understand why it's not letting me switch to CDMA only. It goes back to CDMA/LTE. Could a bad SIM card cause 3g issues?
I doubt the SIM card would cause 3G issues, but hey, anything is possible I guess. I would say that you wouldn't get ANY signal if the SIM card were bad. Do you have another SIM card phone to test with, perhaps? Just an idea...
Did you go to a ROM instead of just the leak? Hell, you might just have signal issues where you are.. Maybe?
Maybe the antenna did burn up.. never heard of it, but that's not saying it can't happen.
I think tracing your steps back is going to be the best at figuring out the issue. When you flashed the ICS leak, you relocked and flashed, right? no errors? the install went straight down the list with no skipping around? After the install, you went through full HTC/Verizon setup? Have you tried the phone in other locations, i.e. work, groceiry store, gas station, interstate, etc.? Even outside the house will give a different strength... Forgive these sugestions as 'elementary' or 'duh' type suggestions, but something just doesn't sound right.
Also, go to your network settings and try changing the network type from automatic to home only. See what happens.
poppajules said:
I doubt the SIM card would cause 3G issues, but hey, anything is possible I guess. I would say that you wouldn't get ANY signal if the SIM card were bad. Do you have another SIM card phone to test with, perhaps? Just an idea...
Did you go to a ROM instead of just the leak? Hell, you might just have signal issues where you are.. Maybe?
Maybe the antenna did burn up.. never heard of it, but that's not saying it can't happen.
I think tracing your steps back is going to be the best at figuring out the issue. When you flashed the ICS leak, you relocked and flashed, right? no errors? the install went straight down the list with no skipping around? After the install, you went through full HTC/Verizon setup? Have you tried the phone in other locations, i.e. work, groceiry store, gas station, interstate, etc.? Even outside the house will give a different strength... Forgive these sugestions as 'elementary' or 'duh' type suggestions, but something just doesn't sound right.
Also, go to your network settings and try changing the network type from automatic to home only. See what happens.
Click to expand...
Click to collapse
I noticed this happeneng a day prior to flashing the ICS leak. I was using wifi tether do download about 600mb's and notice a couple of hours later that it dropped to 1x. Restarted phone and it went to 4g. I usually switch to 3g to save battery, that's when i notice the problem.
The ics leak flash didn't show any errors.
I am trying to flash GB to this new firmware but i'm having a hard time flashing the PH98IMG RUU from scott's site. It reads and checks it but doesnt flash it.
RUU.exe errored out with "Unknown Error"
Droidel said:
I am trying to flash GB to this new firmware but i'm having a hard time flashing the PH98IMG RUU from scott's site. It reads and checks it but doesnt flash it.
RUU.exe errored out with "Unknown Error"
Click to expand...
Click to collapse
Make SURE you are pulling the PH98IMG for the stock RUU from the android police website, NOT Scott. He didn't post up the new leak. The RUU that Scott has will NOT flash over the old ICS stuff he's put out before.
Go here to get the leaked RUU.
In this process, relock your bootloader, flash the file from A.P.(TWICE, this is important), unlock your bootloader with your unlock token from htcdev, and THEN flash what scott has. It's a time consuming process. It's up to you though. The directions are out there on A.P., Scott's website, all over Scott's thread around the 400-page range for the 4.0.1 release... and my abbreviated directions here.
Grab one of the top three selections, not the pre-rooted version.
also, try going back and re-downloading your ROM file, maybe you got a bad download.
If you upgraded to ics, you can't ruu to gingerbread at all because of the older hboot. But you can flash a gb kernel then a Rom or nandroid+ scrosler sdcard fix
Sent from my ADR6425LVW using xda premium
So, long story short, took the Phone into Sprint so they could look at my headphone jack (was cracked and left ear bud would constantly cut in and out) because its acting up.
Gave the Tech the phone without the battery in it (since he didn’t need to power up the device to clearly see the headphone jack has a huge crack in it) but I left my SD card installed. As he was walking away, I asked him if I could remove my SD card and he let me, then seen that I gave him the phone without a battery. So, I ended up giving it to him (praying he didn’t turn it on and see ViperBoys sick ass ROM booting up) and he accidently pressed the power button turning the phone on. Promptly short after, he removed the battery when the phone was on the HTC screen, didn’t even get the boot animation. I was like OHH $h!t, that gonna mess up my phone & sure as $h!t, it did… Just loops in and out of that screen resetting each time with a little vibrate then looping.
I can get into Fastboot and use ADB, I’ve flashed RUU’s, put Stock image on root of SD and let recovery restore (losing my CWM & my HBOOT 1.400), unlocked, relocked, wiped, thrown, and screamed at it with no luck.
I did do a CWM backup before even setting foot in the Store, so I do have a backup. The 1st thing I tried was restoring it through CWM recovery and that didn’t stop the looping. I can still get into fastboot via power + vol down and adb functionality is still there.
HBOOT is 1.50 and s-on is enabled..
Been reading through threads since lunch and tried many different solutions without success. It seems once a phone is this far gone, people stop responding.
Anyone have any ideas?
New phone will be here tomorrow (free of coarse courtesy of Sprint insurance) but I’ve been without a phone all day and most of yesterday. I’d like to get this one back to stock and booting before I trade it in for the replacement tomorrow
So you ran an RUU and it still didnt work? And you're sure the RUU SUCCESSFULLY ran without any parts of it failing right?
If that's true, there's no hope AFAIK. Try to get it not to show the bootanimation by bricking it further.
yousefak said:
So you ran an RUU and it still didnt work? And you're sure the RUU SUCCESSFULLY ran without any parts of it failing right?
If that's true, there's no hope AFAIK. Try to get it not to show the bootanimation by bricking it further.
Click to expand...
Click to collapse
Yup, RUU ran though fine and finished without error. Thing has been rooted since Revolutionary came out with the 1st rooting scheme for the 3D.. Flashed tons of ROM's never had this problem.
lessegr said:
Yup, RUU ran though fine and finished without error. Thing has been rooted since Revolutionary came out with the 1st rooting scheme for the 3D.. Flashed tons of ROM's never had this problem.
Click to expand...
Click to collapse
My only explanation is that while he removed the battery some of your hardware got borked. This can't possibly be a software issue.
yousefak said:
My only explanation is that while he removed the battery some of your hardware got borked. This can't possibly be a software issue.
Click to expand...
Click to collapse
BUMMER! In case the question comes up I ran "RUU_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216_NV_NV_spcs_1.42_release_233304_signed" and it ran just fine.
Hmm, hardware issue. Dont see how I can check for that if it doesnt boot.
Guess I'll just have to wait for the new Phone
try to fastboot oem lock it from fastboot. Then RUU, see if that works.
Why even get this one to work if you are getting a replacement?
Sprint is just going to put the phone back to stock....
jdeoxys said:
try to fastboot oem lock it from fastboot. Then RUU, see if that works.
Click to expand...
Click to collapse
The HTC unlock went as expected. Followed the directions to the "T", then relocked, checked in fastboot (not that I could check anywhere else, LOL) and the phone says "*** RELOCKED***". Ran 2.17.651.5 RUU successfully to the finish. Still looping
WEIRD!
DarkManX4lf said:
Why even get this one to work if you are getting a replacement?
Sprint is just going to put the phone back to stock....
Click to expand...
Click to collapse
Because I just want to know WTF happened!!! Had this Phone since release, abused\used the hell out of it by flashing ROMs constantly, restoring backups, tethering like crazy, emailing, texting, FBing...
No reason for it to crap out on me from a simple mistake, not even of my responsibility, lol!
The only issue I've had with this Phone is that damn headphone jack 1/2 way failing..
Got new phone, terrified to even think about trying to flash new ROM though
lessegr said:
Got new phone, terrified to even think about trying to flash new ROM though
Click to expand...
Click to collapse
LULZ
Same problem with me happened.. Except I had hboot 1.5 and I went one month or two without rooting because I was scared to brick it. I ended up rooting it with desperation and I found my one true love ZR3D rom.
BEAUTIFUL, FAST, plus 4.0 skins ;D. Do it man
Sent from my PG86100 using XDA
Threevo said:
LULZ
Same problem with me happened.. Except I had hboot 1.5 and I went one month or two without rooting because I was scared to brick it. I ended up rooting it with desperation and I found my one true love ZR3D rom.
BEAUTIFUL, FAST, plus 4.0 skins ;D. Do it man
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
DONT TEMPT ME DAMMIT! lol! Just been without a phone for almost 3 days. I'm also seeing a lot of new threads about people experiencing what I've gone through.
Woops, sprint\HTC! once again rooted, and running viperROM.... SWWWWWET!
HBOOT 1.5 and s-on is a *****!
Not to mention... But in Linux, I never got revo recovery to flash... You can do it in windows just do it via fastboot.
Took my Orig cwm bsckup "recovery" & "boot" .img and threw them @ the phone via command prompt.
After cwm was restored, I restored my 4\29\2012 backup that I made before I entered the Sprint store, now my phone is back to the exact same way
It was. Pretty Damn sweet!
So much info here!! I'm truly thankful!!!
Sent from my PG86100 using xda premium
Alright, so last week, I attempted the "Water Drop" fix. Nothing. Today, I rebooted my phone, and the touch screen is non-functional.
Latest stock, Rooted, Locked.
Attempted flashing the original touch screen file over ADB, no luck. Tried booting into stock recovery, and it wasn't there. I need a fix in the next few hours, as I'm on vacation, and I need a functional phone. What's my best bet?
Tried a stock SBF over RSD, and it failed after renumeration.
I feel your pain I wish I could help haha though I had absolutely no problems flashing the water drop fix I've actually never heard of someone flashing the touch capability away xD if you have a costum recovery try downloading a LOCKED rom, put it on your SD card and flash it on your phone OR even better would be to use a nandroid backup or did you not backup your setup before you flashed?
Sent from my Kitchen Sync'ed MoPho!
My Nandroid backup is 700 miles away and inaccessible. So you say there are locked roms, what's my best option on that?
http://forum.xda-developers.com/showthread.php?t=1331648
Download "skinny4g" it's a locked rom and flash it like you would any other rom(wipe first) hopefully this could fix your problem
Sent from my Kitchen Sync'ed MoPho!
Well, I tried that, and the result was a still dead screen. So I flashed back to full stock and took it to Sprint. They spent 2 hours fiddling with it while I was in Target next door, and told me that it turns out that the connection for input was DOA, and the fact that it'd worked for a month was by the grace of some deity. 35 bucks, and a replacement will be on my doorstep when I return home. Motorola warranty w/ Sprint restocking.
Now, I cannot stress this enough, if you're under warranty and have a problem, do not be afraid to go to Sprint. It's better to be without a phone for a few days than to stress out and worry. If you're courteous and patient, and acknowledge that you need their help, things will work.
Glad it all worked out for you! Hopefully the new one you get won't have the most recent photon update (it perma-locks the boot loader)
Sent from my Kitchen Sync'ed MoPho!
TheChronicDroid said:
Glad it all worked out for you! Hopefully the new one you get won't have the most recent photon update (it perma-locks the boot loader)
Sent from my Kitchen Sync'ed MoPho!
Click to expand...
Click to collapse
They ship with 2.3.4 - just got a brand new one earlier this week
Sent from my MB855 using Tapatalk 2
Ok. Let me run some info.
1) Rooted
2) Flashed to run Page Plus
3) CDMA
4) Stock ROM currently
So, I've been nagged by the sprint download for a long while now. I finally decided to go ahead and run the update that was suppose to only install the Sprint Optimizer. Well, after running it and phone restarting, I can't get connected to WiFi. In settings, WiFi now says "Error" as the status.
Well, being the genius that I am, I decided to try and find the download and re-run the update. Couldn't find it. So, I went on XDA Developers and downloaded the PACMAN ROM. When attempting to flash, I get "Error 7". Having no clue what that is, I tried flashing again and got the same error code.
Does anyone have some kind of ROM to flash to get my wifi back or knows of what to do to fix this? Thanks!
FYI. I did go to:
Settings>wireless and networks>mobile networks>automatic connections
and turned it off, rebooted, and nothing still for wifi.
If your phones not s-off it won't be able to flash anything other than HTC/sence roms but if you do that you can flash any sence Rom with either kernel and that will fix it. Being rooted and trying to update will mess up the kernel witch controls thing like WiFi and data connectivity also CPU speed and other things.
Sent from my HTCEVOV4G using xda app-developers app
Ahhh haaa!! Thanks! Going to find a sense rom to flash now.
Welcome! I had the same experience when I was useing a Rom that didn't accept a kernel...
Sent from my HTCEVOV4G using xda app-developers app
Today has been hell! I switched over to Next G Mobile since PP had been down since yesterday (everyone on H***** Forums was talking about it and the buyout). Even though I'm a dealer, I found out that the stuff is actually done MANUALLY. When I put in a request for a port on my dealer page, it goes to someone at NGM to do it manually. Anyways, after 3 hours of on the phone with them, I finally got ported over and 3G data working on my EVO 3D. I re-rooted the phone since I had done a hard reset. Now, I'm scared to add a rom and hose it up again. I think I'm going to buy a Samsung Galaxy S II from Ebay (less than $100 if you buy the bad ESN models) and go from there.