[Q] how to install rom - Vibrant Q&A, Help & Troubleshooting

I have been trying to get to the screen where i can install from sd but it will not let me get to that point. I boot into recovery mode but the options it gives me is
reboot system now
reinstall packages
delete all user data
delete cache data
format internal sd-card
the letters are blue..................
can some help me out????? i want to install a different rom but i can't get to the install rom from sd option
Thanks

Download cwm rom manager from the manager, and install the recovery.
After that you can install the rom you desire!

i tried that and still same result. I have install other roms before but now it wont let me get to the install from sd screen

You should probably learn how to flash back to stock first (instructions are in many of the Guides). If you are flashing roms, eventually something will go wrong, and you will need to reflash to stock, or at least install a new kernel and recovery. Using Odin or Heimdall to install a kernel is part of the instructions for installing CM. Better to have Odin and the JFD file on hand when your phone bricks or boot-loops.

doozerpaul said:
I have been trying to get to the screen where i can install from sd but it will not let me get to that point. I boot into recovery mode but the options it gives me is
reboot system now
reinstall packages
delete all user data
delete cache data
format internal sd-card
the letters are blue..................
can some help me out????? i want to install a different rom but i can't get to the install rom from sd option
Thanks
Click to expand...
Click to collapse
Select reinstall packsges....you may have to do it twice then you should be out of stock recovery and into clockwork recovery
Sent from My I Screamed Vibrant

You can download CWR from my signature and put it on your internal SD. Put the update.zip on the internal and make sure it is only thing labeled .zip on there. Hit Reinstall Packages, let it cycle then hit it again. Recovery will go from blue to green and then you can install ROM from SD.
+1 on the reading and how to install ROMs. Plus while you are in CWR, go to Backup/Restore and do a nandriod backup.
Good luck.

i have all that and have gone back to stock and everything. still same results

doozerpaul said:
i have all that and have gone back to stock and everything. still same results
Click to expand...
Click to collapse
What these guys have told you has worked time and time again for most everyone else. What I would recommend is that you get the AIO toolbox. Everything you need in a one-stop-shop.

Related

Flashing from Recovery

This may be rather silly, but I am having a lot of trouble flashing from recovery.
My screen just says
reboot system now
reinstall packages
delete all user data
delete cache data
where do i go to flash a rom?
using the rom manager doesn't work either, it just takes me to the same screen, nothing flashes.
gsvnet said:
This may be rather silly, but I am having a lot of trouble flashing from recovery.
My screen just says
reboot system now
reinstall packages
delete all user data
delete cache data
where do i go to flash a rom?
using the rom manager doesn't work either, it just takes me to the same screen, nothing flashes.
Click to expand...
Click to collapse
Hit reinstall packages and it should take you into the clockworkmod recovery. Have you even downloaded a rom? Is it on your SD? Do you know how to flash a rom even? Just trying to help
just trying to get all the info so those can better assist you
gsvnet said:
This may be rather silly, but I am having a lot of trouble flashing from recovery.
My screen just says
reboot system now
reinstall packages
delete all user data
delete cache data
where do i go to flash a rom?
using the rom manager doesn't work either, it just takes me to the same screen, nothing flashes.
Click to expand...
Click to collapse
open ROM Manager and select "Flash ClockworkMod Recovery".....you need clockwork to be flashing
once you do this, everytime you boot into recovery it will take you to the stock recovery that you are seeing. click "renistall packages" and that will take you to Clockwork Recovery (you have to do this everytime).
And to flash through clockwork select "choose .zip to install", and this is where you can select any .zip that is on the root of your sdcard to flash
------------------
not being rude, but you really should be reading tutorials before attempting to flash. It sounds like you are just attempting things and hoping they work. This usually leads to threads titled "Am I bricked? Please help!"......check out the "Vibrant Bible" stickie under the Vibrant Development forum, theres a lot of cool/valuable information to be learned....not to mention a lot of unnecessary headaches to be avoided

[Q] Rooted my TBOLT with easy root, latest edition, now error when flash clockworld..

I finally managed to root my TBOLT with easy root, the latest version he put out last night. I made it through step 3 which just said congrats you have rooted, or w.e then it says flash clock world and i get "error occurred while attempting to run privative commands" any help for this?
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
pmazz850 said:
In rom manager you have to check delete cache, then install latest version of CWM.
http://forum.xda-developers.com/showthread.php?t=1002667
Click to expand...
Click to collapse
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
oneders65 said:
Thanks!
I guess the way to Flash a ROM is to place a Custome ROM in the SD Card and Use ROM Manager to Reboot into Recovery and Flash with Clockwork Recovery?
Or Can I select Install ROM from SD Card option in ROM Manager.....?
Click to expand...
Click to collapse
you can do either. I prefer to just boot into recovery, so I can wipe data/factory twice, and wipe cache, and delvik cache twice. then flash a new rom.
the second way you mentioned is more automated, but I don't feel is a thorough.
I tried all the steps but sometimes it just takes a simple reboot.

[Q] 2.3.5 with KI3 . Unable to install CM7

Hi,
Currently using latest firmware KI3 with root.
I'm able to use CWM, backup, install zips, everything.
However, if i install a ROM trough a ZIP, i get a boot loop.
Only way to get back the phone, it's to install via ODIN with latest KI3.
Even tried with Litening Rom, and got the boot loop.
Any ideas ?
I was very keen to return to CM7.
Tx in advance.
Did you exactly what's mentioned here?
Install via ClockworkMod (do not use ROMManager for initial install):
Make sure you're running a rooted device.
Root your device and install ClockworkMod Recovery (http://forum.xda-developers.com/show....php?t=1118693)
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition) - do it for real.
Install the ROM from internal sdcard using ClockworkMod Recovery.
Do not reboot! We mean it - do nothing except choose zip and continue next step (if you come back to us with permission issues in install, we will know you did not read the directions and will call you an idiot). If it just plain hangs, reboot directly back into ClockworkMod recovery and continue at the next step.
Install the ROM from internal sdcard using ClockworkMod Recovery, again (due to a bug in the install).
Reboot
Install the Google Addon through ROMManager which is easiest, but you can
download the gapps.zip and install via ClockworkMod recovery instead.
Click to expand...
Click to collapse
Did you try flashing a old stock ROM like KH3, root it then try from this base?
I went from Villain ROM 2.3.5 to CyanogenMOD without any problems.
It's essential that you flash CyanogenMOD !TWICE! in a row when you're coming from a stock ROM.
Thanks.
Gonna check, as soon as i'm @ 127.0.0.1
Same behaviour, back to boot loop.
Tanx anyway!
I had a similar problem so here goes my help.
Cf root kernel uses a modified version of CWM that isn't compatible with CM7 or something like that. So what I did was flash this kernel http://forum.xda-developers.com/showthread.php?t=1118693. Get the kernel with CWM 5.x.y.z With that I got a compatible version of CWM and from there I flashed CM7. It is important that you do a full wipe, wipe cache, wipe dalvik cache, format \system, everything so you don't get any trouble. THen you flash the CM7 zip file, when tha t is done, flash the zip again for a second time (don't reboot just do it after the first flash). After that reboot. That worked for me at least.
A tip: If you can't reboot your phone and you have no ROM zip file to flash via CWM you can mount usb storage from CWM for putting the ROM in sd card and flash with CWM. That way you don't have to use ODIN to recover.
Tanx Tomas.
Tried with CWM 5.x.y.z and upon "WIPE" always got an error for mounting partitions.
Could't mount CACHE, SDCARD .....
Tx anyway.
Back to ODIN, back to stock 2.3.5
PS : I have to get a JIG to reset ...

GOD I feel like a noob! Optimus V, CWM, and rom issues

I rooted my device using Gingerbreak.
I have 2.2.2 installed out of the box. I installed CWM. I installed busybox.
Busybox failed. I tried all the versions that it contains.
I checked root status, and RootCheckBasic says I'm rooted.
I installed Flash ClockworkMod Recovery. It will not reboot to CWM.
It only reboots to the standard Android recovery.
I'm trying to install Bumblebee ROM 2.4.
Here are some things I am having issues understanding with it...
Backup current apps and their data with Titanium Backup (available in the Market). Is this required? The phone is new. I have nothing to back up.
Do a nandroid backup in recovery before doing anything else below.
And the nandroid backup is done with CWM? Again CWM won't reboot, only the standard Android recovery boots.
Required if installing BB 2.x for the first time: Wipe. Wipe it all. Data, cache, system, dalvik-cache, sd-ext if you've got it (might need to look under Advanced or Mounts in recovery to do the last two, and while you're there format /system). I assume you wipe it all with CWM while in recovery?
If upgrading from BB 2.3, wipe cache (and only cache) in recovery.
Does not apply to me
If not upgrading from 2.3, install Wiper zip (see below), just to be extra sure that all is wiped. Don't reboot yet. Installing wiper.zip is done by sideloading using adb commands?
Install ROM zip (see below).
I assume this too is done by copying the zip to the external SD, then selecting update from SD card in recovery... right?
Please someone shed some light on this for me.
In standard Android recovery it says e3. I know on my Captivate I had to use Odin to install GB loaders to get it to work.
THANKS!​
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
tvall said:
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
Click to expand...
Click to collapse
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
bulltproof said:
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
Click to expand...
Click to collapse
Oh, okay, um... are you using the reboot into recovery option in rom manager right after flashing?
After flashing what?
I reboot into recovery through rom manager and get:
Android system recovery <3e>
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
_________________________________________________________
Android System recovery...
Do not pull out the battery!!
After hitting flash clockworkmod recovery, immediately hit reboot recovery
After hitting anything in CWM it did nothing more than reboot into the standard android recovery.
This phone has 2.2.2 on it. Problem? Probably.
I followed instructions at androidcentral and got it to work.
Needed Xionia_CWMA_12518.6_VM
Installed BACKside-IHO-VM670-11222011
using Xionia_CWMA_12518.6_VM_Recovery-signed
Had a little problem today and needed to activate the phone. BUUUUT......
the rom didn't allow activation.
So I installed Bumblebee. No go.
Then I tried [rom] basic stock rom.
Neither of these will let my phone boot. It gets stuck at boot.
Nothing happens.
I can still boot into Xiona_CWMA. But no roms will work.
PLEASE HELP!!!!
Dude i m noob, and i m facing same problem,
I did root with super one click soc, and it is rooted and i am using root needed apps,
But when i m trying to clobk work recovery (i did flashing CWR from rom manager and aft that i select boot from cwr option from rom manager) it just factory reset i did this 3time all time just factory reset, then i again did but while rebooting i click home button so it gave me same option which came to above member said some e3............
And i try to select any option from it with menu button it was not applied, and no use so i removed battry and place again and start then device started dont know more what to do, help
Sent from my LG-P500 using Android-HQ App
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Bullet if u found solution pls tell me too
Sent from my LG-P500 using Android-HQ App
bulltproof said:
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Click to expand...
Click to collapse
I believe that may be due to the newer display in your phone (I'm new to this device so I dont know much yet). From the little bit of information I've gathered, devices manufactured recently have a different display that requires a kernel that supports it. In the iho roms this is included, on others you'll need to flash a kernel right after the rom.
For the stock rom I can upload what I use if you need it. Its basically the one posted here just with the boot.img swapped with one from a nandroid backup I made before switching roms
I think you're spot on with that idea.
I loaded CM7 variant, and it worked.
My question is, how do I get another ROM on it if it has the newer screen?
I loaded different kernels that were supposed to fix it, but no go.

Bootloop (Device Always Boots Into CWM)

Hi everyone, I have a problem with my phone.
It is no longer booting into the OS, instead it boots into the recovery mode.
So here's what happened. I was on Google Play Store looking for some utility apps, and found this "[ROOT] Rashr" app, read its details and got interested in it since I also do wanna try to back up my CWM Recovery. I don't even completely understand what it means, but as what the apps says, I really thought that with it, backing up my recovery will be very easy, just like how ROM is backed up when you do a NANDroid backup. So, after it was installed, I head on to its Back-Up section, ticked the box for "Recovery", and tapped on "Go", expecting that it would work. It said "Rebooting..." and booted to recovery mode, so I thought that I had to complete the "Recovery Back-Up" inside CWM, so I spent time looking through the options. And, this is where I discovered that CWM has a rainbow color mode. When I found out that no signs of back up could be done in CWM, I rebooted from within CWM. BUT, it still booted to Recovery Mode.
I tried . . .
Odin, but since it boots only to recovery, Odin isn't detecting it.
Wiped the data, cache partition, and Dalvik cache. Then restore.
Can this be fixed? I badly need help.
I have:
CWM Recovery v6.0.3.6 (used when I rooted the phone), updated to v6.0.4.5 (current)
Stock ROM 4.1.2
Recent NANDroid Backup
Any inputs will be very much appreciated. Thanks.
No intention of giving the "Rashr" app a bad name. I just didn't know how to use it.
Endroyed said:
My device is no longer booting into the OS, instead it boots into the recovery mode.
So here's what happened. I was on Google Play Store looking for some utility apps, and found this "[ROOT] Rashr" app, read its details and I got interested in it since I also do wanna try to back up my CWM Recovery. I don't even completely understand what it means, but as the apps says, I really thought that with it, backing up my recovery will be very easy, just like how ROM is backed up when you do a NANDroid backup. So, after it was installed, I head on to its Back-Up section, ticked the box for "Recovery", and tapped on "Go" with expecting that it would work. It said "Rebooting..." and it booted to recovery mode. And I thought that I had to complete the "Recovery Back-Up" inside CWM, so I spent time looking through the options. When I found out that no signs of back up could be done in CWM, I rebooted from within CWM. BUT, it still booted into Recovery Mode. Can this be fixed?
I have:
CWM Recovery v6.0.3.6 (used when I rooted the phone), updated to v6.0.4.5 (current)
Stock ROM 4.1.2
Recent NANDroid Backup
Click to expand...
Click to collapse
Flash Stock Revovery.
http://forum.xda-developers.com/showthread.php?t=2716953
Can Download From Here.
put into memory card.
and select install zip external-sd card select zip and flash it
Cheers!
manojkumar8552 said:
Flash Stock Revovery.
http://forum.xda-developers.com/showthread.php?t=2716953
Can Download From Here.
put into memory card.
and select install zip external-sd card select zip and flash it
Click to expand...
Click to collapse
I never thought the solution would be that simple. Hehe Thanks manoj. :good:
Finally fixed it!
What I did:
1) Flashed the stock Recovery. I was surprised it was able to boot to Android cause I was thinking that the zip is only the stock recovery. It had errors though. Home Screen won't appear or load.
2) When rebooted, it got stuck in SAMSUNG boot animation, but it was all good cause Odin was still able to detect it which means it can still be rooted. So . . .
3) Flashed CWM Recovery v6.0.3.6
3) Wiped data, cache partition, and Dalvik cache.
4) Restored the backup.
Endroyed said:
I never thought the solution would be that simple. Hehe Thanks manoj. :good:
Click to expand...
Click to collapse
No Problems Buddy !!!
Step by step getting all f,,,, Fundas of Android soon

Categories

Resources