Hello,
I tried posting this to the development forum, however since it's my first post I ended up here, so I'm sorry if this seems a bit off topic. Anyway, hi and thanks for having me
Now, what I've been trying to do is load a (backed-up) stock Xperia X10 Mini Pro (U20i) 2.1.1.A.0.6 system.img into the Android SDK Emulator. The problem is I get a corrupted image like the one in the screen shot, here:
imageshack.us/photo/my-images/32/u20iscreen.png
I'm not sure what's causing this, I can only guess that it's a bad screen configuration parameter, so I hoped someone here might have the solution.
I know it's not the system.img, cause I've tried several of them and ended up with the same results, and it's not my OS/SDK/... setup, because without the system.img the emulator works fine.
Here's my avd config:
Code:
hw.dPad=no
hw.lcd.density=160
hw.camera.maxHorizontalPixels=2592
hw.cpu.arch=arm
sdcard.size=512M
hw.camera=yes
hw.gpu.enabled=yes
hw.touchScreen=yes
skin.path=platforms\android-7\skins\QVGA
hw.keyboard.lid=yes
hw.keyboard=yes
hw.lcd.depth=16
hw.ramSize=176
hw.sensors.magnetic_field=yes
hw.sdCard=yes
hw.mainKeys=yes
hw.accelerometer=yes
hw.lcd.height=320
skin.name=QVGA
abi.type=armeabi
hw.audioOutput=yes
hw.trackBall=no
hw.camera.maxVerticalPixels=1944
hw.battery=yes
image.sysdir.1=platforms\android-7\images\
hw.audioInput=yes
hw.sensors.orientation=yes
hw.gps=yes
hw.lcd.width=240
vm.heapSize=24
So, do you see anything wrong with this? Maybe the LCD parameters are wrong? I really don't know
Anyway, ask if you need any more info and thanks in advance
Partially solved
Well, after another hour of trial and error I managed to get it working
Setting the resolution to 320x480 fixed the graphics corruption problem and, although stretched, the emulated screen is now usable. Also, setting the LCD density to 320 really improved the image.
For my purposes (safely testing themes) this is close enough, but I would really appreciate it if someone found the right way of doing this.
Here's the working adv config in case anyone needs it. I'll keep trying, but please let me know if you find the correct screen parameters.
Code:
hw.lcd.density=320
hw.dPad=no
hw.camera.maxHorizontalPixels=2592
sdcard.size=512M
hw.cpu.arch=arm
hw.camera=yes
hw.gpu.enabled=yes
hw.touchScreen=yes
skin.path=320x480
hw.keyboard.lid=yes
hw.keyboard=yes
hw.lcd.depth=16
hw.ramSize=176
hw.sensors.magnetic_field=yes
hw.sdCard=yes
hw.mainKeys=yes
hw.accelerometer=yes
skin.name=320x480
abi.type=armeabi
hw.audioOutput=yes
hw.trackBall=no
hw.camera.maxVerticalPixels=1944
hw.battery=yes
image.sysdir.1=platforms\android-7\images\
hw.lcd.backlight=yes
hw.audioInput=yes
hw.sensors.orientation=yes
hw.gps=yes
vm.heapSize=24
Related
http://forum.xda-developers.com/showthread.php?t=336587
tried copying over to prophet but have not done any modification yet. Looks like we need more changes to make it work in our device. Guess I need help from experts here. Below is the screenshot of my failed attempt.
i hope someone will make it work well on our device !
can't wait to have this new keyboard, it seems awesome
there are two things that i need to do now...
1. get the mapping right...which I am trying figure out now
2. produce it as a cab file so that everyone here can use it...have to worry about this later since i have no experience creating a cab file
it's working on my prophet now but for some strange reason it only works in Word mobile I don't know why but I'm looking into it
Edit:
It works in most apps but only when making a new file or document.
i had little success, suspecting picture files are not complete. if you looking at the entire sets of image file, you will probably see various file similar to those in http://forum.xda-developers.com/showthread.php?t=331155 and registry key may have point to the wrong files as well.
as for me, i managed to get to the stage same as shown in the thread. but after typing a few keys , it went haywire....sigh...
Try this http://www.cootek.com/ and quity wasting your time ...
thanks..i have mentioned that to fellow members before. maybe i shld wait for the official release by end of this month
the cootek software is pretty nice
too bad there's no multilanguage support yet
I've searched this and other forums for solutions (.cab and regedits), but none of them worked for me.
I'm trying to get PC Anywhere 12.5 mobile to run on a custom ROM on my VZW HTC Touch Pro. It works perfectly on the stock ROM, the "pre-release" linked in the stock section, Scott's "6.5 beta" post -- but I can't get the darn thing to properly work on any of Scott's 6.1 custom ROMs. It will install w/o errors just fine on the latter, but as soon as I reboot and try to run the program I get the dreaded "application cannot be found or not signed with a trusted certificate error."
Any help would be greatly appreciated.
Landlocked
I have the same problem with HTC Touch HD...
I´m having the same problem. I try everything that you can think.
My phone is a HTC Touch HD.
The strange thing is that my wife has an Sansumg Omnia with windows mobile 6.1, and I install PCAnywhere and works fine.
If you find a solution, please tell to everybody, i will do the same.
Thank you.
I'm also having an issue with pcAnywhere on my HTC Touch Pro.
It installs fine. However, when I go to connect to a host it sits there with a warning "Warning: Reducing encryption level." -- and it hangs. On the Host I can see the phone trying to connect, but it never makes it. I've tried changing the encryption level to none, tried adding encryption, made sure the phone (remote) and host match.. and nothing. It'll never connect.
The same version of pcAnywhere mobile (3.0.0 Build 123) works fine on my HP iPAQ and HTC Apache without any issues. I've also tried a newer build (from the pcAnywhere 12.5 CD) and I've come away with the same results.
If anyone has any ideas....
Any updates?
Same problem on my htc touch pro
Beefheart36 said:
Same problem on my htc touch pro
Click to expand...
Click to collapse
That sucks, as this is one of the programs that I actually did use. Hopefully someone will figure it out. I'd be willing to donate some $ to the cause.
can you upload the cab so i can take a look at the files and see if i can find an issue...if you want pm me so you dont have to post in the open public...
Any news on these invalid cert. messages? I am having the same issue. Is there a way to turn off certificate on programs??? Wouldn't that be much simpler?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
I had the same problem. At least for me, the fix was to delete all the files that were MFC80xxx.dll. Then I could reinstall this.
I posted this fix a long time ago, but for anyone that may need it again, the way to get this program to work (at least for me):
After install - reboot the device.
Then, look for all the MFC80xxx.DLL files
Rename them to MFC80xxx.dll - it is important that these are all lowercase (the .dll extension).
It should work indefinitely after that fix.
For whatever reason, when pcAnywhere installs, after initial use or after reboot all the MFC80xxx.dll files have a capital .DLL extension. This will make it so that they cannot be read correctly for any application (including my backup applications). But changing it to smaller case .dll works. If you are concerned, reboot and check if it is still in lower case. It should be, but if not, just rename it again - it should stay for good.
Good luck for all that use this program.
Hey Folks,as u read: I am totally new to android.
But here are some facts about me I'll tell you just to say sorry for dumbp questions right at the beginning.
I have a good base of Linux knowlege and i also always was modding my phones. If it was my Motorola Razr v3i or my Rhodium Windows 6.5.
Most important: I REALLY dont want others to make MY work. Dont missunderstand me: Some People just dont have the ability to make that on their own and i think, they needed to be helped too, but not me. I want to learn it and i CAN learn it.
But sorry if I post a question in the wrong Forum or ask questions wich have been answerted pretty often. My Problem ist not to read or speak english: It is to imagine the words I need to use for google and stuff to find my answeres. So, some hints, tips or links to Howtos or stuff woud help me alot.
Burt here the bunde of my most important questions:
It all started with Adobe Flash. I guess my Pad has a arm6 or 7 CPU... it has 600mhz and i found a version for that here on xda- i installed it and its working so far for the adobe flv player and swf files but not as an plugin 4 the reguar browser or dolphin hd. any suggestions?
I also wanted to download teamspeak 3. it seems, there i have the same problem. it tells me, my device is incomatible at the market. So is there a way to get it anywhere else and my to recompile it and patch it to work?
next: i tried to root my device using androot and also z4root. it goes through the process without errors and everything seems to be fine but sshdroid tells me, root is disabled. the access to some locations of the phone still is denied and so i cant install nandroid for backups and before i will go on, i REALLY shoud install an backup solution, right folks?
Well- for the first, thats it. if i know that i guess, the rest is more easy to find out on myself as it is right noe.
Again: You dont need to make my work. sorry and thanks at once && greetings from ?good? ol' germany. Alex
well- one thing i also coud need some help... i was searching arround how 2 set my phone for data2ext4 ... but if i wont get running my phone rooted, i can forget about that, cant I? my card already hav an 4GB ext4 partition beside a 12GB FAT partition
...let you decompile and apk and edit the layout in the xmls, and then display the results in a device emulator without having to recompile and sign the apk and push it to your device? I have all the tools (SDK, Eclipse, apk manager, etc etc etc) but as I am new to Android tweaking I may be missing some simple knowledge that will save a lot of trial and error!
I am looking initially to edit the HtcQuickLaunchWidget.apk (the non-m10 version) and was wondering if there was a way of loading the apk or decompiled apk back into Eclipse or something similar to then be able to tweak the layout of the widget and view the result on the PC rather than spending hours of making single changes and pushing to my phone each time to see the result.
The answer might be a simple 'no other way' or as I say I might be missing something obvious and all I need to do is 'this, this and this'... Any advice would be greatly appreciated. And before you mock, remember we all have to start (or in my case start again) somewhere
Thanks.
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Hi.. I have been trying to fix a tv stick for a few months now (basically is more about the knowledge i am getting - I am not desperate in fixing it). It is a strange piece, probably clone that i have been tricked in buying. It has an Allwinner A20 dual core cpu with an AP6210 wifi module...
Tried to flash another firmware ti improve it, ended up with the wifi problem. Wifi (and bleutooth) will not start. When i press the button, it just slides back to off... I have read and tried anything i could find on the internet. I have also tried tens of firmwares, but the wifi problem persisted (the original firmware is nowhere to be found).. To cut the story short, the device will not connect to a computer through ADB (it just doesn't seem to support this function - is not a matter of drivers). So everything i have been trying did not include this option...Also the recovery can not be changed to support backup and restore from custom recoveries (i.e CWM, or TWRP)..
What i did manage was to extract a backup from the rom, of another identical device, with the Nandroid App (online version, not through the recovery). Then i used the Dragonface program to edit another similar firmware (MK808C). While loaded, i open the FSOP folder which is the folder that dragonface collapses the loaded firmware for editing and then, i replaced the existing system folder with the one i had backed up trough the Nandroid procedure... Then hit the save button of the Dragonface...
I flashed the new *.img to my tv stick with the phoenix tool, and the tv stick booted normally, looking EXACTLY the same as when i first bought it. I even managed to get the bleutooth going this time, BUT, the bloody wifi still refuses to come on :-/
I must tell you, I know my way through some computer technical stuff but I am not an expert into the coding level and i haven't had the experience of Linux systems (thus i don't really understand coding). I really thought all settings and drivers are included in the system file and copying the original system file into another firmware, would do the trick.. but i guess is not that simple... The thing is that, the way i see it, the problem is probably hidden at the booting level... hitting the system configuration in the advance settings of the Dragon face, will open some coding thing which i don't understand.. but i do see the AP6210 module in that coding, which means that the new firmware includes those drivers..If anybody have any idea or can point me to the right direction I would really appreciate it.. Thanks
I have the same problem with AP6210 on H3 Allwinner STB box. After firmware ugrade from Android 4.4.2 to Android 10 Wifi just don't work, button slides back to off. Drivers are present. Have both firware files unpacked.
Please help! What i have to do? Sys_config? Init.rc?