I did the mistake of attempting to install this pre rooted kernel: STOCKPLUS-GT-I9100-XXLPB-KERNEL-ROOTED through Odin.¨
I couldn't find a version that matched my kernel gingerbread.XXKL5 so I thought it would be okay to just install any kernel with the same android 2.3.6 version.
All I wanted was to root my phone, now my phone won't even boot. I think it's stuck on a bootloop ? It goes to the samsung warning triangle screen and stays there.
My phone doesn't seem to be able to enter recovery mode. However, it can enter download mode ..
I'm finding this whole rooting business slightly difficult. I'm in over my head. Please, assist me.
Kind regards,
Nate.
* UPDATE: Managed to reset my phone using the steps detailed by Ctomgee (my hero) I thought my phone was done for. Again, thanks everyone for the invaluable assistance you guys have provided! I even got back all my apps and data
ACHIEVEMENT UNLOCKED: Back from the dead.
Now I'm kind of scared to try but if anyone could explain exactly how to root the i9100G version I'd be much obliged ..
NateWnz said:
I did the mistake of attempting to install this pre rooted kernel: STOCKPLUS-GT-I9100-XXLPB-KERNEL-ROOTED through Odin.¨
I couldn't find a version that matched my kernel gingerbread.XXKL5 so I thought it would be okay to just install any kernel with the same android 2.3.6 version.
All I wanted was to root my phone, now my phone won't even boot. I think it's stuck on a bootloop ? It goes to the samsung warning triangle screen and stays there.
My phone doesn't seem to be able to enter recovery mode. However, it can enter download mode ..
I'm finding this whole rooting business slightly difficult. I'm in over my head. Please, assist me.
Kind regards,
Nate.
Click to expand...
Click to collapse
ACHIEVEMENT UNLOCKED: Softbrick your phone
A quick look at the Q&A stickies on the top would lead you to this thread
http://forum.xda-developers.com/showthread.php?t=1457458
NateWnz said:
I did the mistake of attempting to install this pre rooted kernel: STOCKPLUS-GT-I9100-XXLPB-KERNEL-ROOTED through Odin.¨
I couldn't find a version that matched my kernel gingerbread.XXKL5 so I thought it would be okay to just install any kernel with the same android 2.3.6 version.
Click to expand...
Click to collapse
Surely STOCKPLUS-GT-I9100-XXLPB-KERNEL would be 4.0.3. rather than 2.3.6?
If you're a noob, why ignore all the stickies and FAQ and jump straight for some random kernel?
I was reading a lot of posts via xda dev forum and someone linked to that kernel and I dunno what I was thinking. Apparently I wasn't thinking at all. SORRY. Now how do I fix this? =(
NateWnz said:
I reading a lot of posts via xda dev forum and someone link to that kernel and I dunno what I was thinking. Apparently I wasn't thinking at all. SORRY. Now how do I fix this? =(
Click to expand...
Click to collapse
1) calm down
2) I already replied to your problem
Reading it right now, thanks, however, the download link for the kernel file they're advising you to d/l seem to have expired? Which kernel should I use?
NateWnz said:
Reading it right now, thanks, however, the download link for the kernel file they're advising you to d/l seem to have expired? Which kernel should I use?
Click to expand...
Click to collapse
Please give me a link to the kernel file I should use to restore my phone =)
Before you make things worse, are you even sure you have an I9100? A quick search for XXKL5 revealed I9100G as more likely.
Stop waiting to be spoon fed and do some searching and reading.
NateWnz said:
Please give me a link to the kernel file I should use to restore my phone =)
Click to expand...
Click to collapse
You can try KL3 from Chainfire's CF-Root thread. Should work. Or just use Siyah or Speedmod, and be done with it.
oinkylicious is right... I didn't even think of that.
I attempted to do steps 1-4 in http://forum.xda-developers.com/showthread.php?t=1457458
.. However, After checking the box the phone came in I can conclude that the phone is indeed a GT-9100G. It never occurred to me that there are indeed different SIIs
NateWnz said:
I attempted to do steps 1-4 in http://forum.xda-developers.com/showthread.php?t=1457458
.. However, After checking the box the phone came in I can conclude that the phone is indeed a GT-9100G. It never occurred to me that there are indeed different SIIs
Click to expand...
Click to collapse
This is what I got after attempting to flash the recovery pack.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also I should note that I now don't get the normal download screen but a different screen with an icon of a cell phone and a computer connected by four dots and a small triangle. However odin still seem to recognized my cell. Is my phone completely broken now? =(
I really appreciate your assistance guys. And if I ever recover this phone I vow not to do stupid uninformed mistakes like this ever again
NateWnz said:
I attempted to do steps 1-4 in http://forum.xda-developers.com/showthread.php?t=1457458
.. However, After checking the box the phone came in I can conclude that the phone is indeed a GT-9100G. It never occurred to me that there are indeed different SIIs
Click to expand...
Click to collapse
Yup. There are MANY different SII's... Most have completely different model numbers. GT-I9100 and GT-I9100G are similar, but have different chipsets, so are not compatible for firmwares. Take very good care you only flash things meant for the I9100G.
---------- Post added at 05:39 PM ---------- Previous post was at 05:36 PM ----------
NateWnz said:
This is what I got after attempting to flash the recovery pack.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also I should note that I now don't get the normal download screen but a different screen with an icon of a cell phone and a computer connected by four dots and a small triangle. However odin still seem to recognized my cell. Is my phone completely broken now? =(
I really appreciate your assistance guys. And if I ever recover this phone I vow not to do stupid uninformed mistakes like this ever again
Click to expand...
Click to collapse
That is forced download mode. Means you have to flash something to get it working again.
As long as you can get to download mode, it's not hopeless.
Try this.
Thanks! Just completet step 2. Repartition with Odin successfully!
Waiting 30 mins due to d/l limit on mirror site but then I will download firmware from http://www.sammobile.com/firmware/ and proceed with step 3. Should I just get the European one?
NateWnz said:
Thanks! Just completet step 2. Repartition with Odin successfully!
Waiting 30 mins due to d/l limit on mirror site but then I will download firmware from http://www.sammobile.com/firmware/ and proceed with step 3. Should I just get the European one?
Click to expand...
Click to collapse
I've got no experience with this. I found it with a search. I have a non-G model. Just make sure you use a G firmware.
Sent from my GT-I9100 using XDA App
you may download stock rom suitable to ur s2 and download it to ur s2 via odin. which file then? you need to know ur PDA number.
Sent from my GT-I9100 using Tapatalk
sudonto said:
you may download stock rom suitable to ur s2 and download it to ur s2 via odin. which file then? you need to know ur PDA number.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I can only find firmwares from China, Malaysia and india from the aforementioned link .. anyone found any european, british or american ones?
I9100GDZKJ2 ## 2011 October I9100GOLCKJ2 Malaysia Download
I9100GXWKJ2 ## 2011 November I9100GODDKJ2 India Download
I9100GDZKL3 ## 2.3.6 2011 December I9100GOLCKL3 Malaysia Download
I experienced it last weekend. Bricked!
Having the same issue mistaken I9100G for I9100 and flashed Kernel based on I9100. Initially hanged at the Samsung logo with Yellow Triangle when reboot the phone it shows Phone---Exclamation----PC.
Searched and tried almost everything except sending to MobileTech.
After days of trying I resend it back to Samsung Service Centre claiming got the Logo after updating new FW from Kies.
With no questions asked from Service Centre, they restored my phone the next day.
I would advice you to send it back to service centre if you run outta options.
NateWnz said:
I can only find firmwares from China, Malaysia and india from the aforementioned link .. anyone found any european, british or american ones?
I9100GDZKJ2 ## 2011 October I9100GOLCKJ2 Malaysia Download
I9100GXWKJ2 ## 2011 November I9100GODDKJ2 India Download
I9100GDZKL3 ## 2.3.6 2011 December I9100GOLCKL3 Malaysia Download
Click to expand...
Click to collapse
Probably not... The G variant was only sold in those regions you're finding, as far as I know. Just use the I9100GOLCKL3 Malaysia one, it looks like the latest one. They'll all have english.
Sent from my GT-I9100 using XDA App
ctomgee said:
Probably not... The G variant was only sold in those regions you're finding, as far as I know. Just use the I9100GOLCKL3 Malaysia one, it looks like the latest one. They'll all have english.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Strange, since I purchased it from a swedish online retailer. But thanks will try the Malaysia firmware.
NateWnz said:
Strange, since I purchased it from a swedish online retailer. But thanks will try the Malaysia firmware.
Click to expand...
Click to collapse
I actually feel slightly cheated since the product advertised is clearly the S2 with dual core see
http://www.bazula.se/Samsung-Galaxy/Samsung-Galaxy---mobiler/Samsung-Galaxy-S-II-i9100.htm
Read " Dual Core Processor på 1,2 Ghz "
According to my knowledge, the i9100G is actually limited to single core and is clocked at 1Ghz ?
Related
Hi i've had CM9 in my phone for a half year now without any issues, however two days ago i woke up and went to check my phone, it froze and after that i haven't been able to boot it up, it just hungs at the samsung logo with the triangle and all that, so i've been trying to sort out this for two days straight now and i'm getting really sick of this, what i've done so far is:
* tried to flash alot of rom's and such with no success, stucks at: NAND Write Start!!
* tried to flash on a different computer
* tried to flash with different usb ports
Oh and i can't get into the recovery mode, only the download mode.
This is the files i've tried to flash and such to get my phone working again:
Kernel_I9100XXLPH
I9100XXLPQ_I9100HTSLP3_HTS
I9100XWLPG_I9100XXLPX_I9100NEELP4_NEE
I9100XWLPG_I9100XXLPX_I9100NEELP4_HOME.tar
I9100XWLPG_I9100NEELP4_NEE
GT-I9100_Kernel_Gingerbread-supercurio-3
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4
cm-10-20120927-EXPERIMENTAL-i9100-jb_mali-changmin
cm-10-20120926-NIGHTLY-i9100
cm-9-20120330-ODIN-galaxys2.tar
CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5
CF-Root-SGS2_XX_OXA_KP8-v5.2-CWM5
GT-I9100_NEE_I9100XWLPD_I9100XXLPW_I9100NEELP4
Please, can anyone try to help me? I can't explain how tired i am of this, i really need and want my phone to work again! Thanks
Emperia said:
Hi i've had CM9 in my phone for a half year now without any issues, however two days ago i woke up and went to check my phone, it froze and after that i haven't been able to boot it up, it just hungs at the samsung logo with the triangle and all that, so i've been trying to sort out this for two days straight now and i'm getting really sick of this, what i've done so far is:
* tried to flash alot of rom's and such with no success, stucks at: NAND Write Start!!
* tried to flash on a different computer
* tried to flash with different usb ports
Oh and i can't get into the recovery mode, only the download mode.
This is the files i've tried to flash and such to get my phone working again:
Kernel_I9100XXLPH
I9100XXLPQ_I9100HTSLP3_HTS
I9100XWLPG_I9100XXLPX_I9100NEELP4_NEE
I9100XWLPG_I9100XXLPX_I9100NEELP4_HOME.tar
I9100XWLPG_I9100NEELP4_NEE
GT-I9100_Kernel_Gingerbread-supercurio-3
GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4
cm-10-20120927-EXPERIMENTAL-i9100-jb_mali-changmin
cm-10-20120926-NIGHTLY-i9100
cm-9-20120330-ODIN-galaxys2.tar
CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5
CF-Root-SGS2_XX_OXA_KP8-v5.2-CWM5
GT-I9100_NEE_I9100XWLPD_I9100XXLPW_I9100NEELP4
Please, can anyone try to help me? I can't explain how tired i am of this, i really need and want my phone to work again! Thanks
Click to expand...
Click to collapse
try flashing a stockfirmware which comes with a .pit file and see
Sun90 said:
try flashing a stockfirmware which comes with a .pit file and see
Click to expand...
Click to collapse
Could you please help me out, i'm not really sure where i can find that.
Edit: I live in Sweden, Europe so i need a nordic firmware.
Emperia said:
Could you please help me out, i'm not really sure where i can find that.
Edit: I live in Sweden, Europe so i need a nordic firmware.
Click to expand...
Click to collapse
check the link below read the main post(#1) of that thread and proceed carefully to revive back ur phone
http://forum.xda-developers.com/showthread.php?t=1457458
Sun90 said:
check the link below read the main post(#1) of that thread and proceed carefully to revive back ur phone
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
Thanks, i've read that guide earlier and tried a few steps with no luck.
Is this what i should do?
"WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues "
Emperia said:
Thanks, i've read that guide earlier and tried a few steps with no luck.
Is this what i should do?
"WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues "
Click to expand...
Click to collapse
no dont mess with that 'Bootloader' one ma8, there is one on how to use pit file look into that
look for this in that thread
Recovering a soft bricked phone
1) Grab the Recovery Package, and you'll see a bunch of .tar files. Take a look at the names. You'll see CODE, MODEM, CSC and .PIT. Put each one in its place.
2) Turn off your phone. Enter Download mode by presing Volume Down + Home + Power button.
3) Plug in your phone. It will show you, in a yellow box in ODIN, ID:COMx (x being the number displayed, sometimes displays 7, sometimes displays 9)
Now here, take a breath
First try flashing WITHOUT the .PIT and re-partition. And only if it DOESN'T WORK OR FIX then you flash with the .PIT and Re-Partition ticked.
4) Once ready and done all your prayers, press Start. Wait patiently. It usually takes 5 minutes to flash.
Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
Sun90 said:
no dont mess with that 'Bootloader' one ma8, there is one on how to use pit file look into that
Click to expand...
Click to collapse
Hmm, well the only files i got when i downloaded the recovery package via that thread is:
MODEM_I9100XXLPH_REV_02_CL1104396.tar
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar
GT-I9100-MULTI-CSC-OXALPH.tar
thanks for trying to help me, it's appreciated!
Emperia said:
Hmm, well the only files i got when i downloaded the recovery package via that thread is:
MODEM_I9100XXLPH_REV_02_CL1104396.tar
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar
GT-I9100-MULTI-CSC-OXALPH.tar
thanks for trying to help me, it's appreciated!
Click to expand...
Click to collapse
did u dwnld'd that file under Gingerbread or ICS?
Sun90 said:
did u dwnld'd that file under Gingerbread or ICS?
Click to expand...
Click to collapse
The ICS one, is that wrong?
Emperia said:
The ICS one, is that wrong?
Click to expand...
Click to collapse
yes its correct, The ICS one is the right one for u
now follow the instruction over that thread for where to put those files in ODIN and flash the same
Sun90 said:
yes its correct, The ICS one is the right one for u
now follow the instruction over that thread for where to put those files in ODIN and flash the same
Click to expand...
Click to collapse
Alright, we'll see what happens, there is no pit file thought, correct?
Emperia said:
Alright, we'll see what happens, there is no pit file thought, correct?
Click to expand...
Click to collapse
its only needed in the worst case scenerio
Sun90 said:
its only needed in the worst case scenerio
Click to expand...
Click to collapse
Ah alright, so i should put all those files even the bootloader in odin and try to flash? Just making sure!
Emperia said:
Ah alright, so i should put all those files even the bootloader in odin and try to flash? Just making sure!
Click to expand...
Click to collapse
yes
ps- and remember that u r doing all this thing at ur own risk, do not complain in the Future if something goes wrong there
Sun90 said:
yes
Click to expand...
Click to collapse
This is what happens:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
Emperia said:
This is what happens:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> NAND Write Start!!
Click to expand...
Click to collapse
do u see a red 'fail' message in the big rectangle box in odin
Sun90 said:
do u see a red 'fail' message in the big rectangle box in odin
Click to expand...
Click to collapse
Nope, it just seems like it's stuck, this is what always happens, i never get fail messages or such.
Emperia said:
Nope, it just seems like it's stuck, this is what always happens, i never get fail messages or such.
Click to expand...
Click to collapse
which version of windows ur using is it XP or 7
Sun90 said:
which version of windows ur using is it XP or 7
Click to expand...
Click to collapse
Windows 7, i've tried to flash on windows xp as well, and it gets stuck too, no fail error.
Emperia said:
Windows 7, i've tried to flash on windows xp as well, and it gets stuck too, no fail error.
Click to expand...
Click to collapse
try to reflash using the PIT file att below, extract the file put it in the pit section on odin along with the other files in there respective section also check the re-partition and see
Hello guys!
First of all, I'd like to say Hi to everyone here, because it's my first post, even if i was seeking and reading forum earlier.
Okay, so from the beginning.
I got that phone from a girl who tried to unroot it and change FW. Now, the phone just boots, and stucks on the bootscreen, or goes to Download Mode, and:
1. I don't know what firmware it really is.
2. IMEI is still unknown, until tomorrow, i hope so.
3. I tried to flash everything, just EVERYTHING and:
- I can flash all kind of PIT files, hadn't tried with custom PIT's
- Also, I'm able to flash all kinds of bootloaders, but without any visible changes in phone
- I made my own JIG USB PLUG, but no matter how hard i tried, it didn't work (i'll try tomorrow with 301k, instead of 300k, but i think it's too small difference to work different)(+++ it didn't work even with older bootloader, even with two types of turning off the phone)
- Phone is recognized by system as Samsung Device, but after bootscreen stucking, it changes to an unknown device.
- Flashing kernel ends up with boot.bin and stucks
- Flashing other stuff ends up with NAND Write Start!! or zImage etc.
- I tried all versions of Odin.
I'm getting tired after 4 days, and nights of trying to rivive that screwsung (sry, i'm really mad )
So, again: What am I supposed to do? Any ideas?
Thanks in advance,
CU tomorrow!
celu said:
Hello guys!
First of all, I'd like to say Hi to everyone here, because it's my first post, even if i was seeking and reading forum earlier.
Okay, so from the beginning.
I got that phone from a girl who tried to unroot it and change FW. Now, the phone just boots, and stucks on the bootscreen, or goes to Download Mode, and:
1. I don't know what firmware it really is.
2. IMEI is still unknown, until tomorrow, i hope so.
3. I tried to flash everything, just EVERYTHING and:
- I can flash all kind of PIT files, hadn't tried with custom PIT's
- Also, I'm able to flash all kinds of bootloaders, but without any visible changes in phone
- I made my own JIG USB PLUG, but no matter how hard i tried, it didn't work (i'll try tomorrow with 301k, instead of 300k, but i think it's too small difference to work different)(+++ it didn't work even with older bootloader, even with two types of turning off the phone)
- Phone is recognized by system as Samsung Device, but after bootscreen stucking, it changes to an unknown device.
- Flashing kernel ends up with boot.bin and stucks
- Flashing other stuff ends up with NAND Write Start!! or zImage etc.
- I tried all versions of Odin.
I'm getting tired after 4 days, and nights of trying to rivive that screwsung (sry, i'm really mad )
So, again: What am I supposed to do? Any ideas?
Thanks in advance,
CU tomorrow!
Click to expand...
Click to collapse
Let's start with a model number. It'll be on the label underneath the battery.
ctomgee said:
Let's start with a model number. It'll be on the label underneath the battery.
Click to expand...
Click to collapse
Model number? You mean GT-I9100 or what? I thought it's obvious, so i didn't mention that...
+ I got the IMEI (I feel like an idiot, forgot it is sticked under battery) - first two digits: 35 (someone in some thread found it useful, so maybe it will be useful again)
celu said:
Model number? You mean GT-I9100 or what? I thought it's obvious, so i didn't mention that...
+ I got the IMEI (I feel like an idiot, forgot it is sticked under battery) - first two digits: 35 (someone in some thread found it useful, so maybe it will be useful again)
Click to expand...
Click to collapse
Not so obvious, really. I've seen more people I can count who have different models of SII come to this forum and flash random I9100 stuff to their SGH-I777/SGH-I727/SGH-T989/SPH-D710/SCH-R760/whatever.
Anyways, if you can get to download mode, just try flashing an original Samsung stock firmware. I recommend 4.0.3 or earlier. You can download one from www.sammobile.com.
Also, you said you can flash all sorts of PIT files. What PIT files? If you happened to flash a PIT file NOT meant for an I9100, you may have screwed the pooch.
ctomgee said:
Not so obvious, really. I've seen more people I can count who have different models of SII come to this forum and flash random I9100 stuff to their SGH-I777/SGH-I727/SGH-T989/SPH-D710/SCH-R760/whatever.
Anyways, if you can get to download mode, just try flashing an original Samsung stock firmware. I recommend 4.0.3 or earlier. You can download one from (link).
Also, you said you can flash all sorts of PIT files. What PIT files? If you happened to flash a PIT file NOT meant for an I9100, you may have screwed the pooch.
Click to expand...
Click to collapse
I mean, PIT files of the same type, but from different sources (each one was meant for an I9100)
I tried that one, stucks at NAND Write Start!!... Maybe I'm doing something in wrong order?
I need to go to sleep, really, I don't want to screw something up because of my tiredness. I'll be back in a few hours, and for the moment, thanks for help
celu said:
I mean, PIT files of the same type, but from different sources (each one was meant for an I9100)
I tried that one, stucks at NAND Write Start!!... Maybe I'm doing something in wrong order?
I need to go to sleep, really, I don't want to screw something up because of my tiredness. I'll be back in a few hours, and for the moment, thanks for help
Click to expand...
Click to collapse
We have the same model of SGS2 and tried the same. It also stucks in the bootscren.
celu said:
I mean, PIT files of the same type, but from different sources (each one was meant for an I9100)
I tried that one, stucks at NAND Write Start!!... Maybe I'm doing something in wrong order?
I need to go to sleep, really, I don't want to screw something up because of my tiredness. I'll be back in a few hours, and for the moment, thanks for help
Click to expand...
Click to collapse
I'd also make sure your cable is good, and is connected directly to a port on the computer instead of through a USB hub, or a port on your keyboard, monitor, or other pass-through port.
Hello again.
I've just came home, and first of all, I've tried a few wires, all original, two from Nokia, one from HTC, two from Sony Ericsson, all with the same result.
One thing I want to ask you is that i don't really know which thing i need to flash first, kernel or firmware.
As far as i know flashing ICS Kernel with Gingerbread firmware may cause softbrick, or even hardbrick.
I've tried everything you said and I'm still stuck.
Thanks for your replies.
celu said:
Hello again.
I've just came home, and first of all, I've tried a few wires, all original, two from Nokia, one from HTC, two from Sony Ericsson, all with the same result.
One thing I want to ask you is that i don't really know which thing i need to flash first, kernel or firmware.
As far as i know flashing ICS Kernel with Gingerbread firmware may cause softbrick, or even hardbrick.
I've tried everything you said and I'm still stuck.
Thanks for your replies.
Click to expand...
Click to collapse
Firmwares will contain a kernel. Thus, if you want a custom kernel, you would have to flash a firmware first, then the custom kernel. Otherwise, if you do it in the reverse and flash a custom kernel first, then the kernel contained in the firmware would overwrite the custom kernel.
And you are correct that you cannot use ICS kernels with GB, or GB kernels with ICS.
Try following the instructions in this thread for the original I9100 model: http://forum.xda-developers.com/showthread.php?t=1457458. They are the first two sets of instructions labelled "GINGERBREAD VERSION" and "ICS VERSION". I would try the ICS version first.
ctomgee said:
Firmwares will contain a kernel. Thus, if you want a custom kernel, you would have to flash a firmware first, then the custom kernel. Otherwise, if you do it in the reverse and flash a custom kernel first, then the kernel contained in the firmware would overwrite the custom kernel.
And you are correct that you cannot use ICS kernels with GB, or GB kernels with ICS.
Try following the instructions in this thread for the original I9100 model: http://forum.xda-developers.com/showthread.php?t=1457458. They are the first two sets of instructions labelled "GINGERBREAD VERSION" and "ICS VERSION". I would try the ICS version first.
Click to expand...
Click to collapse
Just to be sure: with Odin v.1.85?
celu said:
Just to be sure: with Odin v.1.85?
Click to expand...
Click to collapse
Any version of Odin should work fine, including 1.85, but I currently use Odin 3.04.
Odin is not recognizing my phone, v 3.04.
I'll try with older version.
EDIT:
Something is wrong with drivers, i'm reinstalling them, just a sec.
EDIT2:
Drivers are ok now, but:
Odin log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
EDIT3:
I was thinking about using Heimdall to flash, but is there any difference?
Is there any possibility to force flash kernel? Or even whole firmware?
celu said:
Odin is not recognizing my phone, v 3.04.
I'll try with older version.
EDIT:
Something is wrong with drivers, i'm reinstalling them, just a sec.
EDIT2:
Drivers are ok now, but:
Odin log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 is valid.
<OSM> GT-I9100-MULTI-CSC-OXALPH.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
Click to expand...
Click to collapse
So you never answered about the USB port - are you plugged directly into the computer? Have you tried other direct ports on the computer yet?
Last resort is to try a different computer altogether.
ctomgee said:
So you never answered about the USB port - are you plugged directly into the computer? Have you tried other direct ports on the computer yet?
Last resort is to try a different computer altogether.
Click to expand...
Click to collapse
I've got 3 USB ports (I'm using a laptop, also Samsung, if it matters), and tried all of them. Maybe I could be able to use PC tomorrow. Or i'll reinstall windows, because i'm using 64-bit version atm.
EDIT:
My father told me, that it could be broken "board to board header connector".. But i'm still trying!
EDIT2:
I've just had a small talk with samsung service manager, he told me that they had one phone that started to work after 24hours spent without battery. Seems a little bit silly, but why wouldn't i try?
EDIT3:
And so.. I'm loosing hope. JIG doesn't work, don't even turns on the phone. Kernel, or firmware can't be loaded at all.. I'm completely out of ideas.
Hey guys,
First up, this is what I was running.
-Samsung Galaxy S3 GT-I9300
-FCC ID: A3LGTI9300A
-SSN: -I9300GSMH
-RootBox v3.8
So I installed RootBox v3.8 a few weeks ago and the update for v3.9 appeared on my phone along with the GAPPS update. I made the mistake of ONLY flashing the first update. So when my phone rebooted it kept on giving me the error 'Android.process.acore has stopped unexpectedly'. I was forced to then revert back to v3.8 and everything seemed peachy. Up until the other night where I turned on my phone and it showed, 'Firmware upgrade encountered an issue. Please select recovery mode in kies and try again'. I accessed 'Download Mode' and tried to flash my stock rom back on but it failed in ODIN and gave me this error.
'<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300OPSEMA1_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!'
Also if I switch on my phone, this is what appears, I can still access 'Download Mode'. Any help would be greatly appreciated.
AW: [Q] [HELP] Soft-Bricked Galaxy S3-I9300
Baraa01 said:
Hey guys,
First up, this is what I was running.
-Samsung Galaxy S3 GT-I9300
-FCC ID: A3LGTI9300A
-SSN: -I9300GSMH
-RootBox v3.8
So I installed RootBox v3.8 a few weeks ago and the update for v3.9 appeared on my phone along with the GAPPS update. I made the mistake of ONLY flashing the first update. So when my phone rebooted it kept on giving me the error 'Android.process.acore has stopped unexpectedly'. I was forced to then revert back to v3.8 and everything seemed peachy. Up until the other night where I turned on my phone and it showed, 'Firmware upgrade encountered an issue. Please select recovery mode in kies and try again'. I accessed 'Download Mode' and tried to flash my stock rom back on but it failed in ODIN and gave me this error.
' Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9300XXEMA2_I9300OPSEMA1_I9300XXELLA_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
boot.img
NAND Write Start!!
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
Removed!!'
Also if I switch on my phone, this is what appears, I can still access 'Download Mode'. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Heya!
Your SIII looks bad with this stripes!
Have you flashed your StockROM via Odin while you were in DownloadMode? If it don't be in DownloadMode, it also can't be flashed.
Try to download a firmware from samfirmware.com and to flash it via Odin in the PDA field while your device is in DownloadMode!
And when you have finished, go to Recovery and Wipe your Data&Cache!
Greetings...
Sent from my GT-I9300 using xda app-developers app
Of course I used ODIN to flash stock rom, it didn't work.
AW: [Q] [HELP] Soft-Bricked Galaxy S3-I9300
Of course I used ODIN to flash stock rom, it didn't work.
Click to expand...
Click to collapse
Sorry that I ask, but have you flashed it in Downloadmode?
Sent from my GT-I9300 using xda app-developers app
TheRealFelix0212 said:
Sorry that I ask, but have you flashed it in Downloadmode?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you read my first post, yes, I did flash it in Download Mode via ODIN.
Well, it obviously had a problem writing the rom into the phone (nand write failed). You may have a hardware fault. Do you have the nand chip that suffers from sds?
Sent from my GT-I9300 using xda premium
I've had similar issues before, not that exact screen, but issues with Odin. It worked eventually.
Try Odin3 v.1.85 from here (CF-Auto-Root thread).
Next, be sure you got a valid file, those from sammobile (Choose your country for).
Next, use only PDA button, nothing else, make sure it's the same settings as in root thread above.
Also make sure all Kies processes are closed.
Now, try until it works. It might take a few tries. This is what worked for me, hope it does for you too.
ratatattata said:
I've had similar issues before, not that exact screen, but issues with Odin. It worked eventually.
Try Odin3 v.1.85 from here (CF-Auto-Root thread).
Next, be sure you got a valid file, those from sammobile (Choose your country for).
Next, use only PDA button, nothing else, make sure it's the same settings as in root thread above.
Also make sure all Kies processes are closed.
Now, try until it works. It might take a few tries. This is what worked for me, hope it does for you too.
Click to expand...
Click to collapse
Still failed in ODIN. You reckon the eMMC chip is damaged?
Baraa01 said:
Still failed in ODIN. You reckon the eMMC chip is damaged?
Click to expand...
Click to collapse
That's what it sounds like keep trying to flash, try a different usb cable and computer if you can. Also remove any sim or sd card.
Also maybe the partition table is messed up but emmc is Ok?
Sent from my GT-I9300 using xda premium
jmpmjmpm said:
That's what it sounds like keep trying to flash, try a different usb cable and computer if you can. Also remove any sim or sd card.
Also maybe the partition table is messed up but emmc is Ok?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Same isssue here, same screen and everything.... I tried for over a month and nothing... got an expensive door steep. If you have any lights about this... let me know!!
try flashing recovery only and then flash 3.8 again through recovery.
try flashing the resurrection rom from the checkrom site through odin in download mode..
galaxys3lover said:
try flashing the resurrection rom from the checkrom site through odin in download mode..
Click to expand...
Click to collapse
Been there, done that. Nothing happens. Same error, Re-Partition failed.
please help?
-Samsung Galaxy S3 GT-I9300
-FCC ID: A3LGTI9300A
-SSN: -I9300GSMH
I hope I've not ended up with this phone mentioned in this thread....purchased a phone from ebay and the seller said its stuck on Android SIII logo...I can get into download mode but before I attempt anything can someone tell me if this is a UK phone so I can apply the correct ROM (if it works!).
Also, currently the phone does not charge, battery is fine as i've tried the battery from own s3 and vice versa...both batteries are fine but the phone does not appear to charge...I'm hoping this is ROM related....
Any help will be much appreciated otherwise its an expensive gamble!
BTW...In the download mode the product bit is blank and does not say Samsung galaxy s3 like my own working phone does...
I'm interested in rooting my new Galaxy S4 but I also would like the original stock rom in case if I ever need to go back to it. Would anyone by any chance have the original stock ROM?
Model: SCH-I545
Android Version: 4.2.2
*If any other details are needed, let me know.
This is a Verizon phone fyi.
Also, could someone please link me to a tutorial/guide for rooting the S4 and some other links that have ROMs that are a "must-get".
Thanks,
Hydra
Read the development forums. The stock image is ready enough to find, as are step by step root instructions. As to your last question, that is the type of thing that gets a thread locked. Read the dev forums, pick a few roms that pique your interest, and give them a test drive.
Sent from my Nexus 7 using Tapatalk HD
najaboy said:
Read the development forums. The stock image is ready enough to find, as are step by step root instructions. As to your last question, that is the type of thing that gets a thread locked. Read the dev forums, pick a few roms that pique your interest, and give them a test drive.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I'm new here so tried my best to find the correct section, and did search for guides.
I'm currently using this guide, http://forum.xda-developers.com/showthread.php?t=2290798 , but upon flashing the prerelease kernal, it failed.
http://i.imgur.com/MjbRPrK.png
Also, in case of anything, how can I leave ODIN mode on the phone? Do I just power it off and reboot?
CM10.1 has been treating me pretty well. Haven't had any crashes or anything and runs fast and stable.
The only issue I noticed is you can't get a GPS lock while Network & Wireless location is on. Once you disable it GPS locks right in.
Sent from my SCH-I545 using Tapatalk 2
I now have a huge problem. I'm at the screen: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Need to resolve this as soon as possible.
HydraS4 said:
I now have a huge problem. I'm at the screen: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Need to resolve this as soon as possible.
Click to expand...
Click to collapse
Go to this guide and download the .tar image to be used in Odin http://forum.xda-developers.com/showthread.php?t=2301259. Boot into Odin mode following this guide http://forum.xda-developers.com/showthread.php?t=2290771. Follow all the instructions exactly and ask questions here if you have any.
Ryno77 said:
Go to this guide and download the .tar image to be used in Odin http://forum.xda-developers.com/showthread.php?t=2301259. Boot into Odin mode following this guide http://forum.xda-developers.com/showthread.php?t=2290771. Follow all the instructions exactly and ask questions here if you have any.
Click to expand...
Click to collapse
The tar file is 1.8 Gbs, is this the only method? I have horrible download speed and going to take 3 hours to download it.
Btw, can someone educate me on what just happened? Did I brick my phone? Will I lose any data?
Thanks,
Hydra
HydraS4 said:
The tar file is 1.8 Gbs, is this the only method? I have horrible download speed and going to take 3 hours to download it.
Btw, can someone educate me on what just happened? Did I brick my phone? Will I lose any data?
Thanks,
Hydra
Click to expand...
Click to collapse
Can you get into regular android recovery?
Ryno77 said:
Can you get into regular android recovery?
Click to expand...
Click to collapse
Nope, I'm working on trying Samsung Kies, maybe that will do it but I tried to get into recovery mode thru the phone but takes me to that same window.
I'm also downloading the stock firmware.
Did you try just flashing the stock kernel back using Odin? Everything you've done is listed in this thread, right? Technically if you tried to flash the pre release kernel and it failed nothing should have happened.
Ryno77 said:
Did you try just flashing the stock kernel back using Odin? Everything you've done is listed in this thread, right?
Click to expand...
Click to collapse
No, I haven't. Is that the one in the guide? If so, I'll do it soon. I have to go out, and now without a phone so going to be a problem for me.
Thanks for the quick support btw, appreciate it.
HydraS4 said:
No, I haven't. Is that the one in the guide? If so, I'll do it soon. I have to go out, and now without a phone so going to be a problem for me.
Thanks for the quick support btw, appreciate it.
Click to expand...
Click to collapse
I don't know if it will work but it's worth trying. The stock Odin should definitely fix your problem though. Yes it's in the thread.
Ryno77 said:
I don't know if it will work but it's worth trying. The stock Odin should definitely fix your problem though. Yes it's in the thread.
Click to expand...
Click to collapse
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Kernel.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Is what I get upon flashing kernel to the stock kernel. I am downloading the stock ROM as I type this. 1 Hour left to download it. Btw, does it matter what type of ROM I download?
Is there a difference from, http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR and http://forum.xda-developers.com/showthread.php?t=2301259 ?
I'm guessing it's the No Wipe feature?
And what's the worst case scenario with rooting the phone? Anything permanent? If this stock ROM fixes the current problem, then I'll attempt to root once more.
Thanks,
Hydra
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRUAMDK_NoWipe.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
What is the PIT partition? Is that my internal storage?
Are you using the factory charging cable to connect to the computer? I don't know why everything keeps failing.... Odin has never failed for me. Do you have another computer you can try this on? Stock charging cable, different usb port or another computer are the things I would try next. I don't know anything about pit files.
Sent from my SCH-I545 using xda premium
Ryno77 said:
Are you using the factory charging cable to connect to the computer? I don't know why everything keeps failing.... Odin has never failed for me. Do you have another computer you can try this on? Stock charging cable, different usb port or another computer are the things I would try next. I don't know anything about pit files.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Tried two types of cables, a generic one and factory/original one. I tried two different computers with 2 different OS. Tried 3 different ports per computer.
Don't know what else I can do.
Since you're able to boot into Odin mode I think this can be fixed but it may require a pit file. Since I know nothing about pit files or why Odin kept failing for you I'm going to let someone else try and help you. I do not think your phone is beyond hope at this point. Good luck.... I hope someone chimes in with the help you need.
Sent from my SCH-I545 using xda premium
Ryno77 said:
Since you're able to boot into Odin mode I think this can be fixed but it may require a pit file. Since I know nothing about pit files or why Odin kept failing for you I'm going to let someone else try and help you. I do not think your phone is beyond hope at this point. Good luck.... I hope someone chimes in with the help you need.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Alright, I appreciate all the help. Thanks!
Hopefully someone can help me out before I head over to Verizon later today.
HydraS4 said:
Alright, I appreciate all the help. Thanks!
Hopefully someone can help me out before I head over to Verizon later today.
Click to expand...
Click to collapse
Yeah, no problem. I'm sorry nothing worked for you.
Sent from my SCH-I545 using xda premium
Does anyone know if Verizon will replace it if it isn't my fault? There is no proof of rooting just a messed up system.
Could anybody please help me finding the original network of this phone , i got following information on back of my phone
Model : GT-9300
FCC ID : A3LGTI9300A
ssn : I9300GSMH
z1284
Made in vietnam
just found one more phone with these numbers from T mobile UK, could anybody please let me know region code for Tmobile UK ?
Try the sticky threads in general forum, original network is irrelevant as the hardware in the i9300 doesn't care.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the sticky threads in general forum, original network is irrelevant as the hardware in the i9300 doesn't care.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for your help, I have been in general section and many more sections on i9300. i have spent like 3 hours on google and XDA to check for an answer. Thats always my first choice , we gain a lot of knowledge when we go thru different sections. But big problem in this model is more than 50 countries are using same model and its really hard to find which country its belong to.
I have already tried ROM from China, India and now I am working on BTU UK and if that doest work i will go for Other UK companies, its coming back fail in ODIN most of the time.
Your problem in Odin is not unknown .
Usual reason is bad download or phone semi bricked .
Go to sammobile.com or samsung-updates.com
Or read the stock rom guide and or the guide on sammobile refrences firmware codes .
Most new Tmobile will be EE .
But i suggest the Kies Emergency Firmware thread will give you a better idea of original firmware .
JJEgan said:
Your problem in Odin is not unknown .
Usual reason is bad download or phone semi bricked .
Go to sammobile.com or samsung-updates.com
Or read the stock rom guide and or the guide on sammobile refrences firmware codes .
Most new Tmobile will be EE .
But i suggest the Kies Emergency Firmware thread will give you a better idea of original firmware .
Click to expand...
Click to collapse
I will post the full log next time, after trying a few steps if everything go okay it will says PASS in green unless for any error it will show FAIL in red
This is the log when i try to add INS firmware file from India in ODIN
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Reading as either a damaged file or motherboard nand damage .
JJEgan said:
Reading as either a damaged file or motherboard nand damage .
Click to expand...
Click to collapse
Thanks JJ, I am downloading some more files and i will let you know about results after trying those files ...
JJEgan said:
Reading as either a damaged file or motherboard nand damage .
Click to expand...
Click to collapse
I have already tried following files
UK: BTU
india : INS
UK : TMU
it seems like there is something wrong with motherboard Nand, if i reflow Nand chip on motherboard , Do you think it will help ??
No, emmc chip is damaged so new motherboard is required.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
No, emmc chip is damaged so new motherboard is required.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks a lot Guys for your help so far , i will go for motherboard replacement ..