{roms}-{kernel}-{bricking}-{customization}=all in one thread for xperias - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

THREAD OVERVIEW
Post 1 : ROMS FOR XPERIA MINI
Post 2 : ROMS FOR XPERIA MINI PRO
Post 3 : ROMS FOR XPERIA LIVE WITH WALKMAN
Post 4 : ROMS FOR XPERIA ACTIVE
Post 5 : COMMON ROMS
Post 5 : CUSTOM KERNEL
Post 6 : BRICKIG AND SOLUTION
Post 7 : CUSTOMIZATION
NOTE :
you can port any rom from other devices because XMP, XM and LWW brothers. and that is why we are in theard the same. porting means just, replace a few files. So you can do it Replace the hw_config, sensors.conf, copy smultron touch hex firmware file /etc_firmware/ and DELETE mango hex's, and edit the build prop /just replace all sk17 and mango or mini pro lines/. And this is all. Flash the mini kernel and install the rom.but for XMP, you must replace the "usr" to the physical keyboard and some file for the adjustment.
thanks to kamarush
BEFORE WE START THERE ARE SOME REQUIRMENTS TO FLASH A ROM AND KERNEL SUCH AS..
{1}.YOUR Bootloader MUST BE unlocked.I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
THERE ARE TWO WAYS OR METHODS OF UNLOCKING BOOTLOADER...
(1).OFFICIAL WAY:http://unlockbootloader.sonyericsson.com/
(2).TEST POINT METHOD:http://forum.xda-developers.com/showthread.php?t=1285285
YOU WILL VOID YOUR WARRENTY IF YOU UNLOCK YOUR BOOTLOADER...
....YOU CAN FIND MORE INFORMATION ABOUT UNLOCKING BOOTLOADER ON ABOVE LINKS....
{2}.YOU MUST BE ROOTED AND HAVE CMW(ClockWorkMode) INSTALL ON YOUR PHONE
HOW TO FLASH CMW IS GIVEN HERE:http://forum.xda-developers.com/showthread.php?t=1345741
BEST WAY TO HAVE ROOT AND CMW IS TO FLASH CUSTOM KERNEL.
IF YOU HAVE ABOVE THINGS THEN YOU ARE READY TO GO...
...TO FLASH CUSTOM KARNEL YOU WILL NEED FLASTOOL:http://forum.xda-developers.com/showthread.php?t=1351309....
POST 1
ROMS FOR XPERIA MINI
1.MiniCMSandwich AOSP Android 4.0.3 RC2:http://forum.xda-developers.com/showthread.php?t=1434001
2.Flush78_v6S:http://forum.xda-developers.com/showthread.php?t=1423058
3.Clean 'n' Tweaked - v4.1:http://forum.xda-developers.com/showthread.php?t=1417621
4.ST15i (Mini) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439293
POST 2
ROMS FOR XPERIA MINI PRO
1.NeroDroid ROM v5:http://forum.xda-developers.com/showthread.php?t=1458963
2.Lewa OS:http://forum.xda-developers.com/showthread.php?t=1462678
3.SK17i (Mini Pro) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439298
POST 3
ROMS FOR XPERIA LIVE WITH WALKMAN
1.XROM™ v1.4:http://forum.xda-developers.com/showthread.php?t=1538083
2.WT19i (Live with Walkman) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439311
3.MIUIv4 beta 2 build 2:http://forum.xda-developers.com/showthread.php?t=1490166
4.[IPHONE-STYLE]Joy os:http://forum.xda-developers.com/showthread.php?t=1540755
POST 4
ROMS FOR XPERIA ACTIVE
1.Spartan Rom V1.8.5:http://forum.xda-developers.com/showthread.php?t=1375991
2.ST17i (Active) 4.0.2.A.0.42:http://forum.xda-developers.com/showthread.php?t=1310292
POST 5
COMMON ROMS
1.CM7.2.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1226715
2.CM9.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1445821
3.HYBROM v16:http://forum.xda-developers.com/showthread.php?t=1373435
4.MIUIv4 2.3.16:http://forum.xda-developers.com/showthread.php?t=1554996
5.Xperia UXP NXT:http://forum.xda-developers.com/showthread.php?t=1520456
6.ExMIUIv4 2.3.30-r1:http://forum.xda-developers.com/showthread.php?t=1578109
7.MiniCMSandwich AOSP Android 4.0.4 RC3:http://forum.xda-developers.com/showthread.php?t=1434001
POST 6
CUSTOM KERNEL
1.[Mini/MiniPro/LiveWithWalkman/Active] Rage Kernel v2.6:http://forum.xda-developers.com/showthread.php?t=1398910
2.KRsH Kernel v3.0 (MiniPro):http://forum.xda-developers.com/showthread.php?t=1349630
3.[Mini/MiniPro/LiveWithWalkman/Active] X kernel 2.6.32.58 ZRAM:http://forum.xda-developers.com/showthread.php?t=1451150
4.NeroDroid Kernel(FOR NERODROID ROM):http://forum.xda-developers.com/showthread.php?t=1458963
5.b KERNELS(FOR SK17i-ST15i-WT19i):http://forum.xda-developers.com/showthread.php?t=1440161
6.KRsH Kernel v3.0 (Mini):http://forum.xda-developers.com/showthread.php?t=1351709
POST 6
BRICKIG AND SOLUTION
...I BRICK MY XPERIA MINI TWISE AND I MANAGE TO SOLVE IT..I AM ADDING THIS POST BEACAUSE I KNOW HOW IT FEELS WHEN YOUR MOBILE BRICKED..
{1}.IF YOU HAVE UNLOCK BOOTLOADER AND YOU ACCIDENTALLY RECEIVE FOTA THEN YOUR XPERIA WILL NOT START IT WILL JUST VIBRATE.
FOR SOLUTION GO HERE:http://forum.xda-developers.com/showthread.php?t=1126358..
{2}.IF YOU ACCIDENTALLY FLASH ANOTHER MODELS ROM ON YOUR PHONE..AND IF YOUR TOUCHSCREEN DOES NOT WORK
THEN GO HERE FOR SOLUTION:http://forum.xda-developers.com/showthread.php?t=1423562
{3}.NEXT TIME WHEN I BRICK MY MOBILE AND I ABLE TO FIND SOLUTION THEN I WILL POST HERE...
POST 7
CUSTOMIZATION
I AM ADDING THIS POST FOR THOSE WHO DONT WANT TO UNLOCK BOOTLOADER..
THAT MEANS TO CUSTOMIZE YOUR XPERIA YOU DONT NEED TO UNLOCK BOOTLOADER..
BUT YOU WILL NEED ROOT ACCESS AND CMW INSTALL ON YOUR MOBILE..
FOR THOSE WHO WANTS CMW WITH LOCK BOOTLOADER GO HERE:http://forum.xda-developers.com/showthread.php?t=1437840
THERE ARE PLENTY THREAD BUT I AM ADDING SOME OF THEM..REST YOU CAN CHECK IT OUT BY YOURSELF..
SO LETS GET STARTED..
1.Customizable Quickpanel, Flashlight toggle:http://forum.xda-developers.com/showthread.php?t=1306044
2.Xperia S v1.7:http://forum.xda-developers.com/showthread.php?t=1503570
3.IceCream Sandwich Xperia V4.0:http://forum.xda-developers.com/showthread.php?t=1453698
4.SE Mix ICS v4:http://forum.xda-developers.com/showthread.php?t=1482244
5.All In One-Live/Mini/Mini Pro/Active:http://forum.xda-developers.com/showthread.php?t=1404786
6.HTC Sense Theme:http://forum.xda-developers.com/showthread.php?t=1546345
If there is anything that I missed please send me a PM to have it added. Please provide a link in the PM, thanks.
If I helped you in anyway, please say thanks!

You should also post links to the stock kernels for the latest f/w's..... ;-)

amey2606 said:
you should also post links to the stock kernels for the latest f/w's..... ;-)
Click to expand...
Click to collapse
your request has been granted..

thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)

ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..

akshay13071990 said:
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
Click to expand...
Click to collapse
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help

ramezzidane said:
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
Click to expand...
Click to collapse
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..

akshay13071990 said:
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
Click to expand...
Click to collapse
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way

ramezzidane said:
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
Click to expand...
Click to collapse
sorry dude i have tell you what i know..i cant help you..
i hope you will solve your problem in future..
try to go to service center and tell them your problem...

ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
TA stands for TrimArea.....
http://forum.xda-developers.com/showthread.php?t=1126358
Ask Bin4ry about it..
He knows better.....

nice thread akshay keep it up

metalrawk said:
nice thread akshay keep it up
Click to expand...
Click to collapse
thanks..

thanks any way

ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53

ramezzidane said:
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
Click to expand...
Click to collapse
that is a great news..and best of luck with your new born live with walkman

akshay13071990 said:
that is a great news..and best of luck with your new born live with walkman
Click to expand...
Click to collapse
thanks dude

akshay13071990 said:
THREAD OVERVIEW
I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
Click to expand...
Click to collapse
Witch rom Can I flash with locked bootloader then?

piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
Just stock rom, no more.
Sent from my SK17i using xda premium

piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
all in one:http://forum.xda-developers.com/showthread.php?t=1404786
this is a kind of a rom..it changes all things..but dont have any script..but you can try rom toolbox pro from android market it has many features like sd card read speed font change,boot animation change..to do all this you need only root and cmw install...without unlocking bootloader...isnt it great.so if you want then try it..

I already mod my sk17i this way,only thoud there is something else I can do with it.Thanks any way.

Related

[Q] CM9 problem Bricked phone (no response at all)

Hello
My phone: sony ericsson experia Neo (MT15i)
I tried to instal CM9 but something went wrong and now i cant start my phone.(normal, recovery nor fastboot)
I downloaded CM9, extracted the boot.img file, and placed it in the fastboot folder.
Then i placed the Zip and the google apps on the SD-card.
I then rebooted the phone in Fastboot and flashed the boot.img file.
Everything looked like it went fine but the phone wasn't rebooting. I've tried alot of things now but nothing works.
The only thing that happens when I try to put on the phone is the slight vibration in the beginning and then nothing happens.
Can somebody please help me? I cant even go in recovery with CWM
I also had this problem with CM 9. You just have the flash the old kernel back. Or you can flash the whole firmware again: http://talk.sonymobile.com/thread/35239
Edit: with Flashtool.
I would have tried that, but the problem is i cant go into flashmode anymore. Nothing works.
Fastboot?
Doesn't work either
GleDel said:
Doesn't work either
Click to expand...
Click to collapse
Follow these steps
1.Download Sony Ericssion Update Service (SEUS)
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
3.If this does not work remove the battery and put it back again and do step no 2.
4.SEUS will detect ur phone and install the latest ICS i.e.4.0.4
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
samneov said:
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
Click to expand...
Click to collapse
2)why volume down?
5)seus nor pcc doesn't relock bootloader, plus if he unlocked it via official way, he won't be able to use pcc nor seus.
@OP: what happens when you try connecting in fastboot mode? No blue led? Hows your phone named in device manager?
@madfysh
I had the same problem with that CM9 kernel and I had unlocked bootloader & I recovered my phone using SUSE by the same process I wrote that's y I suggested him those steps
Sent from my MT11i using xda app-developers app
samneov said:
Follow these steps
1.Download Sony Ericssion Update Service (SEUS)
2.Hold the volume down button key of ur phone and connect to the USB connected to your PC
3.If this does not work remove the battery and put it back again and do step no 2.
4.SEUS will detect ur phone and install the latest ICS i.e.4.0.4
5. U will have a bootloader relocked and rooted phone :fingers-crossed:
Click to expand...
Click to collapse
I will give this a try.
I think there might be a problem with the Trim Area though. I have been looking for a solution but it seems hard.
Madfysh said:
2)why volume down?
5)seus nor pcc doesn't relock bootloader, plus if he unlocked it via official way, he won't be able to use pcc nor seus.
@OP: what happens when you try connecting in fastboot mode? No blue led? Hows your phone named in device manager?
Click to expand...
Click to collapse
I was thinking there was a trim area problem so I was looking for a solution.
At first there was nothing, no device recognized when I attached it to a pc. No flastboot, no flash, no recovery, no leds, nothing at al (exept for a slight vibration in the beginning).
Then I followed the method for unlocking the boot loader with testpoint and then te pc recognized the device as a neo. But thats all. Nothing more, stil no reaction when i try to turn the phone on in any way.
I disconnected the device and now when I reconnect it it isn't recognized anymore.
GleDel said:
Hello
My phone: sony ericsson experia Neo (MT15i)
I tried to instal CM9 but something went wrong and now i cant start my phone.(normal, recovery nor fastboot)
I downloaded CM9, extracted the boot.img file, and placed it in the fastboot folder.
Then i placed the Zip and the google apps on the SD-card.
I then rebooted the phone in Fastboot and flashed the boot.img file.
Everything looked like it went fine but the phone wasn't rebooting. I've tried alot of things now but nothing works.
The only thing that happens when I try to put on the phone is the slight vibration in the beginning and then nothing happens.
Can somebody please help me? I cant even go in recovery with CWM
Click to expand...
Click to collapse
Use Flashtool, flash an Official Global ftf from SONY, then let it boot up. It will work. Only way to do it. PM me if needed
Is this the OFFICIAL CyanogenMod 9 RC1? The boot.img does not work. Use the boot.img from FXP's Unofficial CyanogenMod 9. It works. Personally though, use FXP's CM9 cause it's working better then the official one.
Before using the full restore method (The Flashtool thing) try flashing the boot.img from FXP first. Still doesn't work? Flash official, boot-up, turn off, flash FXP kernel, full-wipe, flash ROM, reboot.
My Phone is fixed.
Alejandrissimo helped me with rebuilding the Trim Area.
Everything works fine now, except connecting to 3G/HSDPA. I used to be able to connect to it but now it doesn't anymore.
Does someone knows a solution for that?
bricked
can you also help me my bricked neo v...im from .238 and i upgrade to .62 from update center...when downloading is done..i press install then my phone goes black....i try it to on sometimes, it vibrates but phone does not boot,always black screen....i try and tried to on but it stopped on vibrating..my phone have no response at all i try to reflash a rom in flash tool but it does not work the still dont boot
PLEASE HELP ME... :crying:
GleDel said:
My Phone is fixed.
Alejandrissimo helped me with rebuilding the Trim Area.
Everything works fine now, except connecting to 3G/HSDPA. I used to be able to connect to it but now it doesn't anymore.
Does someone knows a solution for that?
Click to expand...
Click to collapse
hey,, could u give me some tips that the way to my bricked neo.. . i have tried a lot of ways.. it really hit me:cyclops:

Did i Bricked my Xperia mini St15i - no Touch anymore

Hello Evrybody
i have a huge Problem with my ST15i
I had Rooted GB on it and evrything works fine till i decided to try a custom ROM
so i instal Recovery Tool and installed a Custom Rom for ST15 i
after installling and rebooting to the new rom, i noticed when i tried to open the screen lock bar that the touchscreen didnt react exactly - i had to slide at the other side of the display to unlock it!
So i decided to make the phone fresh with SEUS and ICS4.0! After SEUS update i restarted my phone and the whole touch display didnt work anymore!
only the hardbuttons - i cannot back to any Recovery tool , with out touch display i cant switch to uUSB Debug Mode!!
Is there hope to help my Phone!!
Thx in Advatage!!
Hi,
This means you installed custom rom and it didn't work? And then you connected your phone to pc and used seus while you were on custom rom? You did not flash original sony from back first and updated (or tried to update) while you were on custom rom?
Have you tried to use flashtool? I don't know if your touchscreen has bricked up completely, but you could flash gb firmware back, so you have a clean gb rom.
For this download sony flashtool from here and install it. You go to the drivers section of the flashtool folder on your computer and install them. Then you download the 4.0.2.A.0.42 rom (for SK17i) rom from here and move it to the firmware folder of flashtool on your pc. Then you start flashtool and click on the flash. You select flashmode and then you select the 4.0.2.A.0.42 rom and click ok.
Then you turn off your phone (make sure it is over 50% charged) and hold volume down key. Then you plugin the usb cable to pc and smartphone while holding volume down. It should flash the original gingerbread rom.
If the flash finished you can hope that the touchscreen workd, if not I don't know a solution.
BUT: I DONT TAKE ANY RESPOSIBILITY FOR THIS METHOD!!!
If it has worked you can be lucky, if not you are on non-rooted gingerbread rom and could bring your device to the service, but I'm not sure!
OR: First read this thread cause he has similar problem!
Best regards
Michael
i managed it already to install androis SDK on pc and ADB Drivers - via Fastboot i can reach the Device and Bootloader seems to be open, the blue led is wworking, windows accepts my phone as installed android ADB Device - and when i try with Flashtool, and some other different tools to flash new kernel - i always become the mesagge ithe device must be rooted even from fastboot when i use the (fastboot flash boot boot.img) command
I will try some other things , when this does not helps so i try with service
THX
But led is working anyway, it doesn't say, that the bootloader is unlocked. Maybe really flash the 4.0.2.A.0.42 firmware using flashtool and then try if touch works, otherwise bring device to service, but I don't know if they can notice your try to install a custom rom.
Hope it will work for you!
Marethno said:
Hello Evrybody
i have a huge Problem with my ST15i
I had Rooted GB on it and evrything works fine till i decided to try a custom ROM
so i instal Recovery Tool and installed a Custom Rom for ST15 i
after installling and rebooting to the new rom, i noticed when i tried to open the screen lock bar that the touchscreen didnt react exactly - i had to slide at the other side of the display to unlock it!
So i decided to make the phone fresh with SEUS and ICS4.0! After SEUS update i restarted my phone and the whole touch display didnt work anymore!
only the hardbuttons - i cannot back to any Recovery tool , with out touch display i cant switch to uUSB Debug Mode!!
Is there hope to help my Phone!!
Thx in Advatage!!
Click to expand...
Click to collapse
to fix your problem:
flash stock firmware via flash tools
flash a custom kernel and flash that custom(that you had problem with)
flash stock firmware again
i had your problem and i fixed it.
so... 100%working
fixing
scorpion 13 said:
to fix your problem:
flash stock firmware via flash tools
flash a custom kernel and flash that custom(that you had problem with)
flash stock firmware again
i had your problem and i fixed it.
so... 100%working
Click to expand...
Click to collapse
what if on 4.0.4 rom so i need to reflash same custom firmware(problem)

Totally Bricked: S1 Bootloader wrong. No flashmode/no fastboot/no boot only SOMC

Hello guys, today it's a really bad day for me. My M4 is now totally bricked.
Here's why:
I installed CM 12.1 and I will get back to stock, but my phone not enter in flashmode. So I flashed a zip file of stock rom but it not booted. I want to get Flashmode back, and I find a flashable zip that restore flashmode in Sony Xperia M. I flashed it and... bye bye M4. Now the phone only enter in SOMC FLASH DEVICE, Flashtool not flash, but say:
Device connected with USB debugging OFF. For 2011 devices line be sure that you aren't in MTP mode.
Sometimes enter in Unkown device. I have all drivers and I'm using original cable with USB 2.0 port. Now I'm trying to restore with PCC.
I removed the battery connectors for a while, put them back, but nothing changed.
My battery is at 100%.
What should I do?
So flash mode does not work anymore? This may seem inappropriate to say now that your phone is dead but if you have technical experience you could make a guide to opening and repairing the M4 or at least take pictures. But if flash mode or fastboot works try to restore it first
Well... Sorry to hear that :/ but uh..
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
It uses a MSM8939 board same as ours. It's up to you if you want to attempt it but I'm suggesting not to.. Good luck anyway!
Thank you very much! Firstly I will try to send it to the shop where I buyd (sorry my english) and if they don't change the phone I will try this. Really thank you again!
EDIT: Ok, I am following the tutorial, but my M4 show only qhsusb_bulk with no driver. What I have to do?
alby_var said:
Hello guys, today it's a really bad day for me. My M4 is now totally bricked.
Here's why:
I installed CM 12.1 and I will get back to stock, but my phone not enter in flashmode. So I flashed a zip file of stock rom but it not booted. I want to get Flashmode back, and I find a flashable zip that restore flashmode in Sony Xperia M. I flashed it and... bye bye M4. Now the phone only enter in SOMC FLASH DEVICE, Flashtool not flash, but say:
Device connected with USB debugging OFF. For 2011 devices line be sure that you aren't in MTP mode.
Sometimes enter in Unkown device. I have all drivers and I'm using original cable with USB 2.0 port. Now I'm trying to restore with PCC.
I removed the battery connectors for a while, put them back, but nothing changed.
My battery is at 100%.
What should I do?
Click to expand...
Click to collapse
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
samysimbu said:
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
Click to expand...
Click to collapse
probably you flashed custom kernel/rom with bootloader unlock=NO , you can try the S1 tool to restore your bootloader but you must have the original one.
PiSpecialist said:
probably you flashed custom kernel/rom with bootloader unlock=NO , you can try the S1 tool to restore your bootloader but you must have the original one.
Click to expand...
Click to collapse
Thanx for reply,
My bootloader status is yes.
I think wrong kernel makes this problem,
By the way, how s1 bootloader restore.
Any tools?
And how get original bootloader.
Is loader.sin is helpful from ftf?
Thank u.
I'm waiting for your reply
samysimbu said:
Same problem guys, pls help me.
I have alternative way 2 flash by zip using recovery.
But my Xperia c3 dual won't boot to flash mode makes me little worry.
The green lights turns off suddenly when enter flash mode.
Device driver shows qhsusb_bulk.
After install driver from flash tool it shows SEMC FLASH DEVICE.
FT shows device connected in debugging off.
Can't flash ftf.
Ps: device can boot fastboot
Help
Help
Help
Click to expand...
Click to collapse
samysimbu said:
Thanx for reply,
My bootloader status is yes.
I think wrong kernel makes this problem,
By the way, how s1 bootloader restore.
Any tools?
And how get original bootloader.
Is loader.sin is helpful from ftf?
Thank u.
I'm waiting for your reply
Click to expand...
Click to collapse
you must have qhsusb_dload detected if yes then download this zip extract it and run s1tool, you must copy boot.sin and s1boot from your stock rom, the two files inside the zip are not for your C3, but you can try at your own risk.
PiSpecialist said:
you must have qhsusb_dload detected if yes then download this zip extract it and run s1tool, you must copy boot.sin and s1boot from your stock rom, the two files inside the zip are not for your C3, but you can try at your own risk.
Click to expand...
Click to collapse
Friend, Google Drive file need permission. I did leave request to the file owner. If u r the owner pls give permission to download access

Bricked M4 Aqua E2303 pls help me

i was wished try to new kernel v5 i flashed img with twrp but unfortunelly my system deleted and my kernel too
i can charge with recovery but i can't charge when phone turn off and won't turn red led and i can't boot with flashmode or fastboot please help me
edit: i think i need twrp backup pls help me
advancel said:
i was wished try to new kernel v5 i flashed img with twrp but unfortunelly my system deleted and my kernel too
i can charge with recovery but i can't charge when phone turn off and won't turn red led and i can't boot with flashmode or fastboot please help me
edit: i think i need twrp backup pls help me
Click to expand...
Click to collapse
You must be Flash another version Like V3 of this kernel with FastBoot or Flashtools
Sorry no longer possible cause as if the kernel was disabled. Not working
EHSAN™ said:
You must be Flash another version Like V3 of this kernel with FastBoot or Flashtools
Click to expand...
Click to collapse
Sorry no longer possible cause as if the kernel was disabled. Not working
Try to install firmware with Flashtool "Emma" from Sony.
jtg01 said:
Try to install firmware with Flashtool "Emma" from Sony.
Click to expand...
Click to collapse
Sorry My phone don't get in flashmode and fastboot and do not charging while turned off i have only running firmware and recovery
advancel said:
Sorry My phone don't get in flashmode and fastboot and do not charging while turned off i have only running firmware and recovery
Click to expand...
Click to collapse
Have u tried to do a repair in Sony companion?
Sonyfanatic said:
Have u tried to do a repair in Sony companion?
Click to expand...
Click to collapse
Yes it said to me "get in to flash mode"
advancel said:
Yes it said to me " in to flash mode"
Click to expand...
Click to collapse
Actually I had this problem with my Xperia s. I managed to remove everything but recovery. So here's what I did. Start Sony companion and go to the repair page. When it says plug in and hold down I think it's volume down key. Plug the phone in to the computer. Now it's a waiting game. But if you r lucky the red light should come on after like 10 min or so. If it does wait another ten just so the phone has some battery fueled up. Then plug it out and in again holding the volume key pushed. If this doesn't work just flash cm so you can get in to the phone. Lock the bootloader again and then try Sony companion with cm installed. Oh you don't have to hold volume key the first time
1. Flash boot and system images with TWRP: https://forum.xda-developers.com/m4-aqua/development/rom-6-0-1-xperia-m4-aqua-t3423264
2. Turn off your phone
3. If phone enter fastboot and flashmode go to step 1A, if not, go to step 1B
1A. Flash stock rom with selected "APPS_LOG" and "USERDATA"
1B. Go to recovery, and restore this backup: https://app.box.com/s/6okdn3wafe6mh3y4yhfe451nm0hwasah (if again not boot go to step 1C)
1C. Buy M4 Aqua with broken LCD or digitizer, swap mainboard.
ps. sorry for my English, i from Poland

Flashtool only detects fastboot mode, stuck on Sony logo

Hi there,
my mate gave me his Xperia Z2 asking if I could fix it. He said it's stuck in boot loop. I thought it'd be an easy fix but I am experiencing a problem that I think (I hope I'm wrong) is hardware related.
The phone is indeed stuck on the sony logo and won't go past it. It responds to power+volume up (buzzes 3 times). I can put it into fastboot mode (blue LED, flashtool recognizes the phone in fastboot mode). However, I can't put it into flashmode (LED goes green, but flashtool doesn't recognize it, Windows and Sony Companion doesn't either btw).
Has anyone had this problem before and knows how to fix it or is it indeed a hardware issue?
TIA guys
Cheers
Edit: All the drivers are installed, I have tried two different computers, previous flashings were no prob.
Supertramp89 said:
Hi there,
my mate gave me his Xperia Z2 asking if I could fix it. He said it's stuck in boot loop. I thought it'd be an easy fix but I am experiencing a problem that I think (I hope I'm wrong) is hardware related.
The phone is indeed stuck on the sony logo and won't go past it. It responds to power+volume up (buzzes 3 times). I can put it into fastboot mode (blue LED, flashtool recognizes the phone in fastboot mode). However, I can't put it into flashmode (LED goes green, but flashtool doesn't recognize it, Windows and Sony Companion doesn't either btw).
Has anyone had this problem before and knows how to fix it or is it indeed a hardware issue?
TIA guys
Cheers
Edit: All the drivers are installed, I have tried two different computers, previous flashings were no prob.
Click to expand...
Click to collapse
Is the bootloader Unlocked???
If yes then try flashing a kernel that has built-in recovery and clean flash a new rom
It may helps
Hi, thanks for the reply. I'm afraid the bootloader is still locked, tried to flash a kernel already, it won't let me so I assume it's locked.
Supertramp89 said:
Hi, thanks for the reply. I'm afraid the bootloader is still locked, tried to flash a kernel already, it won't let me so I assume it's locked.
Click to expand...
Click to collapse
Maybe you can unlock bootloader and then flash a kernel(try it at your own risk)
Okay, thanks, will do that. I would have liked to find a way without unlocking the bootloader (wanted so save keys first) but it seems that it's the only way since I can't make it into flash mode. Will give an update after!
Hi there.
Unfortunately I couldn't unlock the bl. I assume, USB debugging isn't enabled. Any ideas?
Supertramp89 said:
Hi there.
Unfortunately I couldn't unlock the bl. I assume, USB debugging isn't enabled. Any ideas?
Click to expand...
Click to collapse
I think there is some gadgets out there that will force your phone to boot to flash mode(im not sure) or you can search "how to force Xperia phone to boot to flash mode" it may helps
If you cannot access fastboot or flash mode there is nothing you can do
Cool, will do, thanks.
Just to clarify: I can access fastboot mode fine, it's just flash mode that isn't recognized! Will post an update.
Supertramp89 said:
Cool, will do, thanks.
Just to clarify: I can access fastboot mode fine, it's just flash mode that isn't recognized! Will post an update.
Click to expand...
Click to collapse
I meant with locked bootloader accessing to fastboot is not useful
raminta said:
I meant with locked bootloader accessing to fastboot is not useful
Click to expand...
Click to collapse
Ah, I see. Well, anyway, I tried to find a way to force the phone into flash mode but nothing worked. Very annoying but I think I'm gonna call it quits.
Thanks for your help anyway, appreciated!
It seems like a firmware issue than a hardware one.
It's either falshtool compatibility issues , a soft-bricked phone or both.
1 - Try using an older version of flashtool like 0.9.18.6 and see if flashmode works.
2 - If you know the current firmware version
you can just flash the stock,signed kernel via fastboot.
xperia z2 stucked on sony xperia logo
Hey i have same problem my xpera z2 is also stucked on sony xperia logo, i cant even software repair my phone with sonycompanion app, I have unlocked bootloader ,please have any solution......
---------- Post added at 03:49 AM ---------- Previous post was at 03:29 AM ----------
raminta said:
I meant with locked bootloader accessing to fastboot is not useful
Click to expand...
Click to collapse
Hey i have bootloader unlocked what can i do to repair my phone....
it stucked on sony logo,,,
ihave unlocked bootloader,and rooted my device..
it all happen when i was trying to install android 0reo 8.0 ROM..
please help..:crying:
DedSec_35 said:
Hey i have same problem my xpera z2 is also stucked on sony xperia logo, i cant even software repair my phone with sonycompanion app, I have unlocked bootloader ,please have any solution......
---------- Post added at 03:49 AM ---------- Previous post was at 03:29 AM ----------
Hey i have bootloader unlocked what can i do to repair my phone....
it stucked on sony logo,,,
ihave unlocked bootloader,and rooted my device..
it all happen when i was trying to install android 0reo 8.0 ROM..
please help..:crying:
Click to expand...
Click to collapse
Flash another kernel and clean rom
raminta said:
Flash another kernel and clean rom
Click to expand...
Click to collapse
how can i do that, have you any procedure...? please
Supertramp89 said:
Hi there,
my mate gave me his Xperia Z2 asking if I could fix it. He said it's stuck in boot loop. I thought it'd be an easy fix but I am experiencing a problem that I think (I hope I'm wrong) is hardware related.
The phone is indeed stuck on the sony logo and won't go past it. It responds to power+volume up (buzzes 3 times). I can put it into fastboot mode (blue LED, flashtool recognizes the phone in fastboot mode). However, I can't put it into flashmode (LED goes green, but flashtool doesn't recognize it, Windows and Sony Companion doesn't either btw).
Has anyone had this problem before and knows how to fix it or is it indeed a hardware issue?
TIA guys
Cheers
Edit: All the drivers are installed, I have tried two different computers, previous flashings were no prob.
Click to expand...
Click to collapse
Are you sure you have the proper flashtool drivers installed? What's the Windows and Flashtool version? And have you connected any other Xperia device in flashmode mode to the same pc before?
I am saying that it is 90% a driver issue..
-Try disabling Driver signature on Windows 10 or 8 then reinstalling Flashmode AND Xperia Z2 drivers from the folder drivers in the main flashtool folder, then restart the pc..
- Try connecting a different USB cable
- Try connecting to a different USB port..
- And when you want to flash the firmware.. Select flash.. Select the firmware.. Check the wipe options (optional).. Press flash.. And after that when flashtool asks to connect the device in flashmode connect it.. Do not connected it BEFORE pressing flash..
Hope this will help you.. Have a good time..
Bye
DedSec_35 said:
how can i do that, have you any procedure...? please
Click to expand...
Click to collapse
Search how to flash kernel through fastboot on sony device or you can use flashtools just connect your phone with fastboot thrn select the thunder button on flashtools and choose fastboot the choose flash kernel
I think you have faced boot loop because you flashed android 8 and didn't flashed kernel
raminta said:
Search how to flash kernel through fastboot on sony device or you can use flashtools just connect your phone with fastboot thrn select the thunder button on flashtools and choose fastboot the choose flash kernel
I think you have faced boot loop because you flashed android 8 and didn't flashed kernel
Click to expand...
Click to collapse
yeah this all happen when i tried to install android 8...
thanks brother i'll try that one , do you have any site for downloading kernel for xperia z2,,
raminta said:
Search how to flash kernel through fastboot on sony device or you can use flashtools just connect your phone with fastboot thrn select the thunder button on flashtools and choose fastboot the choose flash kernel
I think you have faced boot loop because you flashed android 8 and didn't flashed kernel
Click to expand...
Click to collapse
hey,thank you so much it worked...i have flASHED marshmallow ftf file. is there anything again i have to do....or its ok to procede
DedSec_35 said:
yeah this all happen when i tried to install android 8...
thanks brother i'll try that one , do you have any site for downloading kernel for xperia z2,,
Click to expand...
Click to collapse
You can find kernel in rom zip
raminta said:
You can find kernel in rom zip
Click to expand...
Click to collapse
it worked thank you so much you saved my day,.i was about to gave up and about to go to sony service centre , but i thaught lets have last try, and it worked,,, thank you so much...

Categories

Resources