Related
I was recently given a nook tablet. It is running version 1.4.3. The only root methods I have been able to find all involve using the NT16or8gbV4_7 image and I can not find a working link to the file. Is there another way to internally root and install a recovery so that I can flash roms?
Am preparing a boot2recovery from sdcard for helping new nook tablet users install roms.
Unzip and copy everything included in this zip package to the root of a fat32 sdcard and tell me if you can boot into cwm.
http://d-h.st/ZRC
Btw this is development section and your problem belongs to q&a
demetris_I said:
Am preparing a boot2recovery from sdcard for helping new nook tablet users install roms.
Unzip and copy everything included in this zip package to the root of a fat32 sdcard and tell me if you can boot into cwm.
http://d-h.st/ZRC
Btw this is development section and your problem belongs to q&a
Click to expand...
Click to collapse
Sorry, should have put it in Q&A. Thanks for the response. If I unzip the files and copy them to my sdcard the nook still boots normally. They look like the files that are on my sdcard if I used windiskimager to write a bootable sdcard. Wouldn't I have to write stuff to the card and not just copy them over?
You must prepare the sd card for Nook compatibility booting
i bet you didn't.
If i remember well is 1st partition/70mb/fat32/named boot/and must be active.
Search around for answers or be patience until i find some time to prepare a new quide.
demetris_I said:
You must prepare the sd card for Nook compatibility booting
i bet you didn't.
If i remember well is 1st partition/70mb/fat32/named boot/and must be active.
Search around for answers or be patience until i find some time to prepare a new quide.
Click to expand...
Click to collapse
Yeah I had started to do that from one of the guides but had since re-formatted the card. Anyway I set it up as such and copied the files over. It's booting to Cyanoboot but I'm seeing "bboti: bad boot image magic (in memory)" and "Hold n for menu". Holding n does nothing.
Go into the stickies section there is a full guide with links to the files.
Sent from my LG-MS840 using xda app-developers app
Vyrus69 said:
Go into the stickies section there is a full guide with links to the files.
Sent from my LG-MS840 using xda app-developers app
Click to expand...
Click to collapse
There is only one guide in the stickies on this page and that involves using ADB and the link to the instructional video is dead. The other guides I've found required the file I mentioned above which all lead to dead links. I was hoping for a bootable SD card then installing a recovery internally to the nook so that I can flash roms directly from the recovery as I've done with many other Android devices.
I figured it out, can a mod please delete this thread? Thanks for the help guys.
Snakebear said:
I figured it out, can a mod please delete this thread? Thanks for the help guys.
Click to expand...
Click to collapse
Agreed. Somebody delete this, no offense Snakebear.
Hey!
A friend of mine has this new tablet - Coby Kyros Mid1060 - and ask me to install Gapps and what was missing...
The thing is... I accidentally renamed the 'boot proper' file original without copying the new one...
So, as you can imagine, i can't boot the tablet, it stucks on 'android' logo...
I've been searching for different ways to reach the file but i can't...
Before doing that renaming operation i managed to root the device and i can get to the recovery menu...
Is there a way to fix this problem?
I appreciate all your advices.
Thank you.
Same Problem
I'm having a very similar problem with that device.
I've deleted the build.prop file while trying to rename it.
Could anyone send me a copy of that file? I'm trying to replace it with an update.zip
Paulo Rodrigues
zecamanel said:
Hey!
A friend of mine has this new tablet - Coby Kyros Mid1060 - and ask me to install Gapps and what was missing...
The thing is... I accidentally renamed the 'boot proper' file original without copying the new one...
So, as you can imagine, i can't boot the tablet, it stucks on 'android' logo...
I've been searching for different ways to reach the file but i can't...
Before doing that renaming operation i managed to root the device and i can get to the recovery menu...
Is there a way to fix this problem?
I appreciate all your advices.
Thank you.
Click to expand...
Click to collapse
Hello.
I'm having the same problem ... Already have some solution?
This worked for me
I made the update.zip file that you could find in attach.
It replaces a build.prop file that will allow a factory reset.
The device will reboot again.
1. copy the file to an microSD
2. plug the microSD in the tablet
3. turn the device on in recovery mode ("volume down" and "on" )
4. select "apply update from sdcard"
5. select the "update-signed.zip" file
6. reboot you device
hope this helps
If you are stuck on the bootlogo, you can always edit/add/replace files in your device. No need for flashable zips.
Follow this
http://forum.xda-developers.com/showthread.php?t=2280206
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
einst31n said:
If you are stuck on the bootlogo, you can always edit/add/replace files in your device. No need for flashable zips.
Follow this
http://forum.xda-developers.com/showthread.php?t=2280206
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
Click to expand...
Click to collapse
My device wasn't detected by the computer... And there was no backup to recover...
A noobie thing.
Was it detected by android commander?
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
einst31n said:
Was it detected by android commander?
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
Click to expand...
Click to collapse
I don't know... Don't have it..., but I can tell you that the USB debugging was disabled.
android commander is not an app its a windows program. Try connectingyour device to your PC and check android commander. If you have an insecure kernel , you can access the root of your device and make any changes you want.
einst31n said:
android commander is not an app its a windows program. Try connectingyour device to your PC and check android commander. If you have an insecure kernel , you can access the root of your device and make any changes you want.
Click to expand...
Click to collapse
Thanks.
nevertheless what I did worked for me and is a practical way for people with less skills or knowledge to solve their problem.
With that in mind I posted it.
I tried lots of thins, including connecting the computer to the tablet... nothing worked, but this did. My tablet is working now.
Original rom?
Hi there, is this the original rom file for the MID1060? My tablet is having some problems with the positioning sensor and i need to send it back to warranty, but i've modified it so it can have googleappz on it and i can't restore. Do you think that wth this i can solve it?
pjfsfr said:
I made the update.zip file that you could find in attach.
It replaces a build.prop file that will allow a factory reset.
The device will reboot again.
1. copy the file to an microSD
2. plug the microSD in the tablet
3. turn the device on in recovery mode ("volume down" and "on" )
4. select "apply update from sdcard"
5. select the "update-signed.zip" file
6. reboot you device
hope this helps
Click to expand...
Click to collapse
my phone is
gionee Gpad_G2
help any expert. how cwm rom installation in my sdcard. i research in Google. and i read someone page i was trying to open this. recovery. img with mtk tool clockwork. mod but my mehod was wrong? here is no show. my recovery. option. only. for normal phone switch off. and on. it is work but recovery. not showing. i have no pc how to solve this problem without pc any help me pleace?
There are two easy ways:
1st Method
1. Install a app named ROOT MANAGER from play store (PLEASE NOTE THIS IS FOR ROOTED DEVICE ONLY)
2. If you have already rooted, after installing that app it will ask to install a custom recovery ie. CMW (ClockworkMod Recovery)
3. Before selecting CMW, ROM manager app will ask your device model select accurately and proceed to Download CMW and install it. It will ask for a reboot
4. You are Done
2nd Method: (You must have a Computer)
1. Try to Download the zip file of CMW of your device (zip file differs for device to device, So choose carefully your model)
2. Extract that zip
3. Go to Download mode (Power+ Volume down)
4. Install Software named ODIN v1.85
5. Open Odin and Connect your device to computer.
6. Flash the extracted file using Odin.
7. Done mate :thumbup:
itsmepawan said:
There are two easy ways:
1st Method
1. Install a app named ROOT MANAGER from play store (PLEASE NOTE THIS IS FOR ROOTED DEVICE ONLY)
2. If you have already rooted, after installing that app it will ask to install a custom recovery ie. CMW (ClockworkMod Recovery)
3. Before selecting CMW, ROM manager app will ask your device model select accurately and proceed to Download CMW and install it. It will ask for a reboot
4. You are Done
2nd Method: (You must have a Computer)
1. Try to Download the zip file of CMW of your device (zip file differs for device to device, So choose carefully your model)
2. Extract that zip
3. Go to Download mode (Power+ Volume down)
4. Install Software named ODIN v1.85
5. Open Odin and Connect your device to computer.
6. Flash the extracted file using Odin.
7. Done mate :thumbup:
Click to expand...
Click to collapse
there is no app called root manager it is rom manager and rom manager installs cwm only for a supported no of devices so you cant have cwm with rom manager on all phones
for the question you can try mediate cwm as it is a mediate processor phone search in xda
sangalaxy said:
there is no app called root manager it is rom manager and rom manager installs cwm only for a supported no of devices so you cant have cwm with rom manager on all phones
for the question you can try mediate cwm as it is a mediate processor phone search in xda
Click to expand...
Click to collapse
Hey sorry mate, I typed ROM MANAGER as a ROOT MANAGER in hurry.
Edit: Sorry for the mistake.
sir my device not show . rom manager. recovery. i select all devices. there which 1 model choose i confuse?
ommand: "/sbin/recovery" I:Checking for extendedcommand...I:Running extendedcommand...Waiting for SD Card to mount (20s)I:using /data/media, no /sdcard found.SD Card mounted...Verifying SD Card marker...SD Card marker not found...533aff7cfafd5547595aef04ad035cc1Error processing ROM Manager script. Please verify that you are performing thebackup, restore, or ROM installation fromROM Manager v4.4.0.0 or higher.I:using /data/media, no /sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue.. help me how. solve this problem without pc
.
.
abhilaab said:
Click to expand...
Click to collapse
I don't think that files are for your phone hence it will not work correctly
bro help help please. i try. of recovery.imgfind it G610s-u00-CWMrecovery-0715.imgworked to 1 problem that. 1st . Chinese language. in. but . 2nd i try. rom manager.find one device huwai transformer recovery flash.v5.8.2.0 installing zipthere. is. English. language. recovery. with clockwork. mod show. 1st. and 2nd.to missed problem.
. /data/media, no/sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. i find recovery.log. dir/root data/media clockwork. but. file not correctly. any expert. where is currently sdcard file how. found this file
abhilaab said:
bro help help please. i try. of recovery.imgfind it G610s-u00-CWMrecovery-0715.imgworked to 1 problem that. 1st . Chinese language. in. but . 2nd i try. rom manager.find one device huwai transformer recovery flash.v5.8.2.0 installing zipthere. is. English. language. recovery. with clockwork. mod show. 1st. and 2nd.to missed problem.
. /data/media, no/sdcard found./tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. i find recovery.log. dir/root data/media clockwork. but. file not correctly. any expert. where is currently sdcard file how. found this file
Click to expand...
Click to collapse
no offence but I don't understand what you said please be clear
try google translate my friend
sangalaxy said:
no offence but I don't understand what you said please be clear
try google translate my friend
Click to expand...
Click to collapse
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
abhilaab said:
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
Click to expand...
Click to collapse
Dont get mad friend with out any correct .img you cant flash your phone it will not succeed i think thats what happened in your case
Gionee is a china brand and it is a common problem with the chinese that you cant get any original firmware
---------- Post added at 10:41 PM ---------- Previous post was at 10:40 PM ----------
abhilaab said:
bro my handset is= gionee Gpad_G2.
i try
cwm rom installation in my sdcard. i research recovery options in. Google. and i read one 2 10 pages. i open mtk uncle tool and i update. choosing (model 610s uoo) Chinese recovery.img i there is bootloader in Chinese language. show.
my real English bootloader no show
and zip files . not installing. ? e can't amount? i founded recovery.log nothing correctly
. and
sdcard file. where is no idea? so help me. please.!
Click to expand...
Click to collapse
Dont get mad friend you have to find the correct img file without it it will not succeed
how found and my old original. boot .img. ya how bekup English language.
abhilaab said:
how found and my old original. boot .img. ya how bekup English language.
Click to expand...
Click to collapse
It is the problem with the china you cant get any original firmware for your phones anyway try google may be you can find something
any help me please
help me
Little help Please
Greetings,
I am trying to root my Galaxy Exhibit 2, I have copied the cwm mod zip file to my sd card, but when i boot into recovery mode i cant see the file.
I can see it from files on the phone and when im attached to my pc. What is the noob doing wrong?
Any clues would be greatly appreciated.
Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Next7P12-8G Root Screen Shots
potzken said:
Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Click to expand...
Click to collapse
............
Well, this is my first post here as well. I uploaded some screenshots of the recovery screen, after downloading a (supposed ROM) to my external SD card from freaktab...(I can't include the link cuz I'm a noob)...just google this tablet model number and you'll find the thread with the ROM attachments.
Needless to say, the root didn't work, and I was wondering what I did wrong as well...
Nextbook 7 Premium SE (so says the generic insert that came in the box), but the model number is Next7P12-8G.
Yeah, I watched the noob video, and scoured all the threads. This device isn't even listed. Anywhere.
Don't know if these pics will help anyone, but as far as I can tell, getting to this screen is at least a start, as finding just how to put this device into recovery mode was chore in itself; to do that you must power it down, and once the device is completely powered off, hold down the power and volume control/down button (-) simultaneously until you see the update screen (in direct contradiction to what the instruction manual says- there is no "reset button" to be accessed through a pin hole)...then immediately release.
Well, good luck. If anyone can figure out how to root this thing, please let me know! Thanks!
*************EDIT*********************
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
Works great. Thanks to Shaunmt at freaktab.com
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
-> So, to root my Nextbook 7 all i have to do is follow these steps? Where can i find the files needed? Is this really working, have you tried it? I just want to root my tab.. thanks
This Root Works for Next7P12-8G
Yes Sir, it works! I rooted all 3 of my kids' Christmas tablets (lol)... Here's the link:
Well, I can't attach the link due to forum rules (this is only my 3rd post, I guess you need 10 before you can attach outside links...) So, copy and paste this phrase into Google and it should be the first one that comes up:
Amlogic Next7P12-8G Modified Recovery - Stock Rom & Flashable Root
Just download the first and third (links) on this page, as the middle one is a ROM (which is explained on the page, as only being necessary in case you have a corrupt one and need to fix it- it's not a mod). All you need is the modified recovery file and root zip file. Just read the thread, follow the above instructions (which are also located within the thread), and you'll be good to go!
potzken said:
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
-> So, to root my Nextbook 7 all i have to do is follow these steps? Where can i find the files needed? Is this really working, have you tried it? I just want to root my tab.. thanks
Click to expand...
Click to collapse
Question about rooting
Well, this is my first post here as well. I uploaded some screenshots of the recovery screen, after downloading a (supposed ROM) to my external SD card from freaktab...(I can't include the link cuz I'm a noob)...just google this tablet model number and you'll find the thread with the ROM attachments.
Needless to say, the root didn't work, and I was wondering what I did wrong as well...
Nextbook 7 Premium SE (so says the generic insert that came in the box), but the model number is Next7P12-8G.
Yeah, I watched the noob video, and scoured all the threads. This device isn't even listed. Anywhere.
Don't know if these pics will help anyone, but as far as I can tell, getting to this screen is at least a start, as finding just how to put this device into recovery mode was chore in itself; to do that you must power it down, and once the device is completely powered off, hold down the power and volume control/down button (-) simultaneously until you see the update screen (in direct contradiction to what the instruction manual says- there is no "reset button" to be accessed through a pin hole)...then immediately release.
Well, good luck. If anyone can figure out how to root this thing, please let me know! Thanks!
*************EDIT*********************
Originally Posted by shaunmt View Post
It's pretty simple:
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Note: There is NO need to flash the ROM if you just want ROOT. The ROM is only needed by people who have screwed up their firmware.
Works great. Thanks to Shaunmt at freaktab.com[/QUOTE]
question about same model number but different processors
Hi I noticed the model number for this Next7P12-8G, well I ordered one from Walmart and am expecting to get it this week. I noticed even though the model number I am getting is the same, the one I am getting has the 1GHz Cortex A9 processor instead if the dual listed above. Do you know if the rooting process would be the same as the dual? This is the efun nextbook7p12-8 that is on sale on Walmart.com right now for 64.99 or something. Has anyone tried this lately? Thanks in advance
Follow this!
Hi! I am new to this site. I have Nextbook too and its rooted. This METHOD WORKS 100%
Follow this video: goo.gl/vl0kI7
The video doesn't explain it very good, so do the best as you can. DON'T FORGET TO READ THE DESCRIPTION
Thanks
Good work
nextbookroot13 said:
Yes Sir, it works! I rooted all 3 of my kids' Christmas tablets (lol)... Here's the link:
Well, I can't attach the link due to forum rules (this is only my 3rd post, I guess you need 10 before you can attach outside links...) So, copy and paste this phrase into Google and it should be the first one that comes up:
Amlogic Next7P12-8G Modified Recovery - Stock Rom & Flashable Root
Just download the first and third (links) on this page, as the middle one is a ROM (which is explained on the page, as only being necessary in case you have a corrupt one and need to fix it- it's not a mod). All you need is the modified recovery file and root zip file. Just read the thread, follow the above instructions (which are also located within the thread), and you'll be good to go!
Click to expand...
Click to collapse
excuse me, but the links that you refer are not available, well only is available the last one, but it didn't work for me.
Can some one help me with the links of download?
tecno_allende said:
excuse me, but the links that you refer are not available, well only is available the last one, but it didn't work for me.
Can some one help me with the links of download?
Click to expand...
Click to collapse
Found it at freaktab.com the root package is Kiser(sp?) Root just search root nextbook on freaktab
Would have posted link as well but I also am a noob and thus is my first post
its work
potzken said:
Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Click to expand...
Click to collapse
1. Download the modified recovery .zip file.
2. Unzip the recovery file.
3. Put the "uImage_recovery" file from the recovery .zip on your external SD Card.
4. Download the root .zip file. (Do NOT Unzip)
5. place the root .zip file on your external SD Card.
6. Turn off tablet, put SD Card in (if not already in)
7. Hold Volume and Power. (Tablet will boot into the modified recovery it finds on the SD card)
8. Choose install from EXT. (Volume keys to navigate list, Power button to select.)
9. Choose the root .zip file.
10. Wait for finish.
11. Reboot.
12. Download your choice of Supersu or Superuser from the Play Store.
Nextbook model: next7100kld can be root?
hi i want to root my tablet please give me guide how to root it or can it be rooted.? thanks cheese
Kingaroot!
potzken said:
Nextbook 7
AML8726-MX Dual core chipset
DDR3 1gb
Android OS 4.1.1
I need help on rooting my nextbook 7... i have zero knowledge on rooting tablets and i also want to know how to undo the rooting if i brick my tab...This is my first time posting here.. thank you in advance
Click to expand...
Click to collapse
My little brother had this tab and I figured it out! I am not responsible if anything happens (it hopefully won't) search kingaroot it should be some jap site, download the app that should have a phone right next to it, and that will root this device. Just uninstall the app afterward.
Anybody else having issues with touch when TWRP loads ?
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?