Does everyone else have the same thing on their 3d or is it something I should be concerned about????
onebenadams said:
Does everyone else have the same thing on their 3d or is it something I should be concerned about????
Click to expand...
Click to collapse
Short answer: probably not
Longer answer: Depending on which custom recovery you're using, the support for the capacitive buttons isn't really fully present. At one point in TWRP development there was support but I've read there are issues with the kernel HTC released and capacitive button support on the EVO 3D.
As long as you reboot and the LEDs are off, there shouldn't be any issue other than a small over looked bug in the recovery.
Which custom recovery are you using?
Hope that helps!
I am using TWRP..., Which recovery do you thing is best??
It happens to me also....
Sent from my 3VO 3Deeezy
You must be confused by Joeykrim's answer. Lol.
I'm sure he was thinking you meant something else.
I'm guessing that when the screen is really bright and all the capacitives are off it looks like the Search button is still half way lit. Am I right?
This has nothing to do with any software/firmware/rom/recovery. Its a physical flaw IN the phone. The LCD display panel isn't properly encased. So the backlight of the screen bleeds into the capacitive search buttons area. It happens on more 3D's than it doesn't. I tried taking mine apart and fixing it. But it hasn't helped. :-\
felacio said:
You must be confused by Joeykrim's answer. Lol.
I'm sure he was thinking you meant something else.
I'm guessing that when the screen is really bright and all the capacitives are off it looks like the Search button is still half way lit. Am I right?
This has nothing to do with any software/firmware/rom/recovery. Its a physical flaw IN the phone. The LCD display panel isn't properly encased. So the backlight of the screen bleeds into the capacitive search buttons area. It happens on more 3D's than it doesn't. I tried taking mine apart and fixing it. But it hasn't helped. :-\
Click to expand...
Click to collapse
This makes sense(pun intended) to me and sounds quite logical.... Thanks a bunch felacio
My Photons power buttons been weird last few days really squishy just doesn't rise back up right completely most of the time and just isn't right.. have a feeling its going to completely go soon. Hoping I can easily replace on my own, no insurance so if it dies looks like time to upgrade if I cant actually fix it on my own. Anyone have any insight on part numbers or anything?
Most people claim to take the rear parts of their photon off and reposition their power button. I wouldn't recommend this unless you feel confident doing so, but don't blame me for any damage! Haha.
I had the same issue ( for a while, randomly fixed itself) and I used a custom ROM w Volume Rocker Wake and a power widget to shut the screen off. I still use these methods regardless my power button working again.
Sent from my MB855 using xda app-developers app
My Samsung Galaxy S2 (AT&T) is rooted, and I am running a custom ROM. It worked great for about 7 months, but yesterday my phone would randomly reboot when I would press my power button. I thought it was either the custom ROM or my power button was stuck so I installed a new custom ROM to see if that was the problem was software related. After I installed the new ROM the power button worked great, but this morning my phone would only unlock when I plugged it into the AC or when someone called me (The power button is not unlocking/locking the phone). I've tried to boot into Recovery, but I need the power button to reinstall a ROM and it's not working there either. I've done some research and one guy said it may have overheated and to let it sit without the battery for a few hours so this is what I'm doing now. However, I think I've come up with the conclusion that my power button is broken, and if this is the case I could use some help on how to fix it because I'm not skilled with phone hardware. Any help is appreciated, and if I find anything else that helps then I'll be sure to post back that my problem is fixed and what I did to fix it.
The ROM I'm running now is SlimBean for S2 (AT&T)
Has no one else had this problem? Does anyone have any fixes or suggestions?
Lots I'm sure. I remember seeing at least two other threads like this recently. U can get into download mode and flash without a power button if I'm not mistaken. Also u could use mobile odin pro to flash back to stock. I mean if your point is to try and find out if it's a hardware problem or q software problem. If you already know it's the hardware I would try and fix it yourself or get a warranty replacement.
Phalanx7621 said:
Lots I'm sure. I remember seeing at least two other threads like this recently. U can get into download mode and flash without a power button if I'm not mistaken. Also u could use mobile odin pro to flash back to stock. I mean if your point is to try and find out if it's a hardware problem or q software problem. If you already know it's the hardware I would try and fix it yourself or get a warranty replacement.
Click to expand...
Click to collapse
Thanks for the reply. You can flash without a power button in CWM Touch, but Slimbean only has CWM. I can't flash Touch without a power button. Kind of a crappy situation. lol
UPDATE:
I just tried using the Odin method in this thread (http://forum.xda-developers.com/showthread.php?t=1313659), and now I'm stuck in a bootloop on the AT&T logo. I can get into 3e Recovery, but once again without a power button I can't do a Wipe Data/Factory Reset so I'm just stuck at this point. Any more suggestions?
You could have downloaded an app from the market called quick boot and booted into recovery mode. My daughters phone is doing the exact same thing. Haven't got a chance to look at it. I have found out that the power button is different from the international version. Would have been an easy fix if they were the same. Her's is less than a year old so I may send it in to Samsung for repair. The button looks like its modular and soldered to the board instead of being soldered to the board via a flat flex cable. I'm going to updated my post on the subject once I get some facts.
beaverslayer said:
You could have downloaded an app from the market called quick boot and booted into recovery mode. My daughters phone is doing the exact same thing. Haven't got a chance to look at it. I have found out that the power button is different from the international version. Would have been an easy fix if they were the same. Her's is less than a year old so I may send it in to Samsung for repair. The button looks like its modular and soldered to the board instead of being soldered to the board via a flat flex cable. I'm going to updated my post on the subject once I get some facts.
Click to expand...
Click to collapse
I could boot into recovery (CWM), but it didn't do me any good because my power button wasn't working so I couldn't select an option. An update after you get facts would be nice though. Thank you.
karothacker said:
Thanks for the reply. You can flash without a power button in CWM Touch, but Slimbean only has CWM. I can't flash Touch without a power button. Kind of a crappy situation. lol
UPDATE:
I just tried using the Odin method in this thread (http://forum.xda-developers.com/showthread.php?t=1313659), and now I'm stuck in a bootloop on the AT&T logo. I can get into 3e Recovery, but once again without a power button I can't do a Wipe Data/Factory Reset so I'm just stuck at this point. Any more suggestions?
Click to expand...
Click to collapse
I was experiencing the exact same problem! At firstly my power button was so sensitive that it turned out to be a 'touch button' instead of pressed button. It always auto directed to power button menu. Until yesterday it decided to die on me. Thank God I installed AOKP rom which has the option to wake the screen with volume wake option.
However to answer your question (i ran into the same problem that I stuck in AT&T ICS boot logo), it's stuck because the data/cache needed to be wiped before it could freshly boot up. This is what I did:
1) Get into the download mode (with battery out/in, hold 2 volume buttons and plug into the usb)
2) Get Odin (I figured out you already have it)
3) Download a siyah kernel which version must be above 3 in order to have the touch kernel (nonswap or micswap in whatever you can find from the internet). Make sure you download the kernel in a TAR format. Otherwise ODIN wont work with it.
4) Flash the siyah kernel through Odin under PDA option
5) Now, unplug your usb and insert your battery. Hold on to both volume buttons again and all hail to auto bootup function in our phone. You will manage to get into siyah recovery
6) Reflash/restore any rom you want that has SIYAH's support
Hope this helps. Right now, Im searching for one working screen lock widget without having the screen on/off within seconds. It's annoying!
its a hardware problem.you can get it fixed from a local repair shop spending $10.
bb_hershey said:
I was experiencing the exact same problem! At firstly my power button was so sensitive that it turned out to be a 'touch button' instead of pressed button. It always auto directed to power button menu. Until yesterday it decided to die on me. Thank God I installed AOKP rom which has the option to wake the screen with volume wake option.
However to answer your question (i ran into the same problem that I stuck in AT&T ICS boot logo), it's stuck because the data/cache needed to be wiped before it could freshly boot up. This is what I did:
1) Get into the download mode (with battery out/in, hold 2 volume buttons and plug into the usb)
2) Get Odin (I figured out you already have it)
3) Download a siyah kernel which version must be above 3 in order to have the touch kernel (nonswap or micswap in whatever you can find from the internet). Make sure you download the kernel in a TAR format. Otherwise ODIN wont work with it.
4) Flash the siyah kernel through Odin under PDA option
5) Now, unplug your usb and insert your battery. Hold on to both volume buttons again and all hail to auto bootup function in our phone. You will manage to get into siyah recovery
6) Reflash/restore any rom you want that has SIYAH's support
Hope this helps. Right now, Im searching for one working screen lock widget without having the screen on/off within seconds. It's annoying!
Click to expand...
Click to collapse
Thanks a lot man. I was trying to find a kernal that was in TAR format, but I couldn't find one till you suggested Siyah. I just flashed the rom I used to use which was AOKP (Older version of ISC) and will upgrade to the newer JB rom tomorrow. thanks a lot.
Glad that it worked for you mate
Sent from SGS2 i777.. be prepared for typo.
bb_hershey said:
Glad that it worked for you mate
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
Just a quick update. I'll be talking it to a shop Monday to see if someone else can find the problem internally. In the meantime I've installed Quick Boot to restart/recovery/etc, ExTweaks to enable slide to wake (Volume wake didn't work all the time. This is much better.), and a Screen Lock Widget. I can finally use my phone again, but I still want this button fixed. lol
karothacker said:
Just a quick update. I'll be talking it to a shop Monday to see if someone else can find the problem internally. In the meantime I've installed Quick Boot to restart/recovery/etc, ExTweaks to enable slide to wake (Volume wake didn't work all the time. This is much better.), and a Screen Lock Widget. I can finally use my phone again, but I still want this button fixed. lol
Click to expand...
Click to collapse
Surprisingly my power button work now! Btw, which rom you flashed and which screen lock widget you used? I tried mre than 10 apps but my screen goes on/off like crazy!
Sent from SGS2 i777.. be prepared for typo.
bb_hershey said:
Surprisingly my power button work now! Btw, which rom you flashed and which screen lock widget you used? I tried mre than 10 apps but my screen goes on/off like crazy!
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
That's awesome! Sadly mine is still broken. lol
Right now I have the AOKP (JB 10/17) ROM, and the widget is called "Lock Screen Widget." The Widget only locks the screen; it's working great for me!
I spoke to Josh from mobile tech videos since my wife's i777 power button just took a Shiite. He said he can do it for $35. I fully trust his work as he fixed my old cappy long ago and I have spoken to him on a few occasions on the phone just to be android stuff.
I have been at work all week so I haven't even been able to see if my wife's phone is a software issue or hardware. But it can only be turned on (the screen) by plugging it into a charger. So I am following this thread so tomorrow or soon I hope to check out her phone or send it to Josh.
Sent from My SGH-I777 Running Spiderman Themed AOKP or Spiderman Themed CM10
RockRatt said:
I spoke to Josh from mobile tech videos since my wife's i777 power button just took a Shiite. He said he can do it for $35. I fully trust his work as he fixed my old cappy long ago and I have spoken to him on a few occasions on the phone just to be android stuff.
I have been at work all week so I haven't even been able to see if my wife's phone is a software issue or hardware. But it can only be turned on (the screen) by plugging it into a charger. So I am following this thread so tomorrow or soon I hope to check out her phone or send it to Josh.
Sent from My SGH-I777 Running Spiderman Themed AOKP or Spiderman Themed CM10
Click to expand...
Click to collapse
$35 is well worth this annoyance. I'm going to see what my local shop will charge; if he charges around the same price and I don't have to ship it then I will gladly take it there. That sounds like the same problem I was having so it's probably hardware, but you can flash another ROM to see if that fixes it. Please post back with any further information; this problem seems to be all over with no one giving much advice/tips. Good luck!
karothacker said:
$35 is well worth this annoyance. I'm going to see what my local shop will charge; if he charges around the same price and I don't have to ship it then I will gladly take it there. That sounds like the same problem I was having so it's probably hardware, but you can flash another ROM to see if that fixes it. Please post back with any further information; this problem seems to be all over with no one giving much advice/tips. Good luck!
Click to expand...
Click to collapse
Yup. Unsure what causes it and how I got it back alive. Was thinking perhaps the board problem? Have you guys had some severe fall or water damage done to your phone before? Just asking
Sent from SGS2 i777.. be prepared for typo.
Mine was like that too, when i pressed it, it would bring the power menu or restart the phone as if i left it pressed some seconds, but now it works fine. Im using latest AOKP by task. Really weird.
Any way, while i was with the problem, i was using the slidetowake feature from Siyah, volume wake and an that maps long press search button to unlock, and i don't even use the power button anymore. Its more confortable to me to slide a finger across the screen, and to long press the search button to lock it.
bb_hershey said:
Yup. Unsure what causes it and how I got it back alive. Was thinking perhaps the board problem? Have you guys had some severe fall or water damage done to your phone before? Just asking
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
That's interesting. I have not dropped my phone, and it has never gotten anything more than a little rain on the screen. I took it to a cell phone shop and he said that the water damage indicator inside the phone had turned pink which means that it thinks there was water damage, but there was no corrosion on the board or any other indicators of water damage. I don't know what could have turned that pink though...
djluis48 said:
Mine was like that too, when i pressed it, it would bring the power menu or restart the phone as if i left it pressed some seconds, but now it works fine. Im using latest AOKP by task. Really weird.
Any way, while i was with the problem, i was using the slidetowake feature from Siyah, volume wake and an that maps long press search button to unlock, and i don't even use the power button anymore. Its more confortable to me to slide a finger across the screen, and to long press the search button to lock it.
Click to expand...
Click to collapse
That's how my problem started so I would be careful with using the button to much. It's good that you like the slide2wake more. lol I believe it's a soldering problem so the shop I took it to is looking into that.
karothacker said:
That's interesting. I have not dropped my phone, and it has never gotten anything more than a little rain on the screen. I took it to a cell phone shop and he said that the water damage indicator inside the phone had turned pink which means that it thinks there was water damage, but there was no corrosion on the board or any other indicators of water damage. I don't know what could have turned that pink though...
That's how my problem started so I would be careful with using the button to much. It's good that you like the slide2wake more. lol I believe it's a soldering problem so the shop I took it to is looking into that.
Click to expand...
Click to collapse
Sometimes its the moist around you would turned the indicator to pink. I have read it somewhere. Now it works flawlessly. So you left your phone with them?
Sent from SGS2 i777.. be prepared for typo.
---------- Post added at 06:33 PM ---------- Previous post was at 06:31 PM ----------
djluis48 said:
Mine was like that too, when i pressed it, it would bring the power menu or restart the phone as if i left it pressed some seconds, but now it works fine. Im using latest AOKP by task. Really weird.
Any way, while i was with the problem, i was using the slidetowake feature from Siyah, volume wake and an that maps long press search button to unlock, and i don't even use the power button anymore. Its more confortable to me to slide a finger across the screen, and to long press the search button to lock it.
Click to expand...
Click to collapse
volume wake button doesnt always wake my screen without a few attempts. Which app you used to map the search button to lock the screen? or did you personally got into the prop to map it?
Sent from SGS2 i777.. be prepared for typo.
bb_hershey said:
Sometimes its the moist around you would turned the indicator to pink. I have read it somewhere. Now it works flawlessly. So you left your phone with them?
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
That's what I thought it might be. Maybe shower steam? I did leave it with them, and he said all he did was mess with the button and it started working again. I don't know what it is... maybe dust in the button?
I've got a recurrent problem with my Desire X which seems to have two parts, and doesn't seem to correlate with any other post that I've found;
- quite often when the screen is asleep, when I press the power button to wake it the screen doesn't come back; I get the bottom capacitive buttons lighting up, but no screen. Hitting power again turns off the lights, sometimes I can toggle it on and off a few times and it comes back (combined with swiping the screen possibly), but other times no matter what I do I can't get it to wake the screen and I have to resort to pulling the battery. Also doesn't help to plug in power. NB: yes battery is always at least 60% charged minimum
- other times when the screen is on the brightness/display goes into a build-up loop and washes out the screen, sometimes strobing, sometimes only leaving streaks of colour. Sometimes toggling the screen on and off via the power button works, sometimes it doesn't. I use Auto-brightness, but I have experimented with full- and half-brightness and it hasn't made a difference, so doesn't seem to be sensor-related.
I thought I'd hold out to see if the OTA JB update fixed it, but it doesn't look like that's going to appear here anytime soon.
Any thoughts? I've kept it relatively stock.
A small video ? Its a hardware fault anyways. Did it fell down ?
Sent from my HTC Desire X using xda premium
DanceOff said:
A small video ? Its a hardware fault anyways. Did it fell down ?
Click to expand...
Click to collapse
I'd post a video, but it always seems to happen when I don't have another device handy.
It hasn't had any bad knocks, only ever typical day-to-day bumps; I'm very careful with my phones. Does it sound like a specific known hardware fault?
Stock ROM, recovery, etc? Or any custom one?
Completely stock, not rooted, only some apps and widgets added, nothing removed.
Is the phone on warranty? Maybe it's hardware stuff and it will cost more than one headache.
Enviado desde mi HTC Desire X
Definitely hardware. Claim warranty asap.
Sent from my HTC Desire X using xda app-developers app
Here's an example photo of one of the many exciting things the screen randomly does. I'm trying to compile a pile of photos and hopefully video to support my claim, problem is that it's so completely random. I took it to an Optus store the other day to get some sort of idea as to what would happen, and the guy seemed to reckon that they'd do what he tried; pressed the power button on/off about 20 times, if they don't get it to misbehave in that time they'll say it's not faulty!
Want to make sure I get a full backup before sending it in also.
This greeted me on waking it. Sometimes this kind of thing will randomly crop up when in the middle of using it, other times power button won't wake screen, others I get incoming calls but no screen so can't answer - power button is the only thing that responds, which of course hangs up.
Okay, my is being absolutely retarded. When I press the power button 99% of the time the screen won't come on. I have to push the button 20-30 times in order for it to come on sometimes.
The issue is though, I know the power button works because when I press it the home, menu, back and search buttons always light up.
And to make things weirder I can still use the touch screen even though the screen is black. If I love my thumb around I can feel the unlock vibrate :/...
In other words my "screen works" but usually stays black.
Any idea what this is?
Sent from my HTC EVO 3D X515m using xda app-developers app
Same thing happened with me,i'm just holding the home and the back button after i pressed the unlock button and the screen is working,
try to run an official RUU to restore your evo 100% ,maybe it's help you
Hey I have the exact same problem.. But my is from evo getting contact with water.. Technicaly the screen is on but it just doesn´n show up anything just dark..
Our screens are pretty crappy, my digitizer is broken on mines. I call it the Struggle phone now