Restoring to return to Sprint - HTC EVO 3D

I have a feeling the digitizer on my wife's EVO 3D has gone bad and I want to return it to Sprint but I am having trouble restoring it to a Sprint ROM. Can someone point me to a functional download of a stock rom? I am either downloading the wrong one or the link from many of the older posts is dead. The ones that I have downloaded don't seem to be working or I am doing it wrong. At the moment the phone boots to the white HTC screen and hangs there. I am able to boot into fast boot and get into recovery but none of the .zip files I am attempting to load are working. I have tried using an RUU EXE but I keep getting an error about the batter being below 30% even though it has been charging all night while turned off. I have looked through many stickies and how to instructions but I just can't seem to figure it out. Thanks for any assistance with this issue.

jschauf said:
I have a feeling the digitizer on my wife's EVO 3D has gone bad and I want to return it to Sprint but I am having trouble restoring it to a Sprint ROM. Can someone point me to a functional download of a stock rom? I am either downloading the wrong one or the link from many of the older posts is dead. The ones that I have downloaded don't seem to be working or I am doing it wrong. At the moment the phone boots to the white HTC screen and hangs there. I am able to boot into fast boot and get into recovery but none of the .zip files I am attempting to load are working. I have tried using an RUU EXE but I keep getting an error about the batter being below 30% even though it has been charging all night while turned off. I have looked through many stickies and how to instructions but I just can't seem to figure it out. Thanks for any assistance with this issue.
Click to expand...
Click to collapse
The best way to return to stock, is by using the leaked HTC tool, RUU. RUU stands for ROM Update Utility.
There are many different ways to handle this situation. The method I would use and prefer, I posted yesterday and am quoting:
Easiest solution is to attempt the RUU again ..
If for some reason, that process isn't working but you're able to access the bootloader, I'd remove the sdcard, using another device, load the rom.zip from the RUU.exe onto the sdcard, rename rom.zip to PG86IMG.zip and boot into the bootloader. The bootloader will recognize this file and flash it, having the same outcome as using the RUU.exe via USB.
Click to expand...
Click to collapse
Great location for the leaked RUU.exe or rom.zip files contained inside of the RUU.exe is: http://goo-inside.me/shooter/ruu .
Good luck!

I have downloaded the RUU and extracted the rom.zip, renamed it to PG86IMG.zip, copied it to the root of the sd card, and booted into the bootloader. Here is a link to a video of what happens.
http://youtu.be/k1rlKUSmp7Y
I don't know if i grabbed the wrong file or if the phone is just FUBAR.

jschauf said:
I have downloaded the RUU and extracted the rom.zip, renamed it to PG86IMG.zip, copied it to the root of the sd card, and booted into the bootloader. Here is a link to a video of what happens.
http://youtu.be/k1rlKUSmp7Y
I don't know if i grabbed the wrong file or if the phone is just FUBAR.
Click to expand...
Click to collapse
Have you tried to boot the phone let it charge up and snag the 2.17 ruu exe from football's thread in dev section.
I would turn debug on then adb reboot bootloader fastboot into recovery wipe and then go back to hboot and relock the phone a must do ... Then use the ruu .
Sent from my PG86100 using xda premium

The phone will not boot past the white HTC screen so debug mode stuff is out of the question. If I relock the phone will it let me use the ruu and not give me the under 30% battery error even though the phone has been charging for the last 2 days.

jschauf said:
The phone will not boot past the white HTC screen so debug mode stuff is out of the question. If I relock the phone will it let me use the ruu and not give me the under 30% battery error even though the phone has been charging for the last 2 days.
Click to expand...
Click to collapse
I would hope so .. to use a ruu you must be relocked. I think you get some funky issues tryin to use it without relockin first I have seen others try it your way and have it say 30% thing.
I would try it . I only know you have to be relocked to use a ruu exe.
Sent from my PG86100 using xda premium

I will give that a try when get back. Good thing locking and unlocking is pretty easy. I just wish everything else on this stupid phone was.
Sent from my SPH-D710 using Tapatalk

Got it, thanks for the assistance. Once i relocked it the ruu worked perfectly.

jschauf said:
Got it, thanks for the assistance. Once i relocked it the ruu worked perfectly.
Click to expand...
Click to collapse
Anytime man
Sent from my PG86100 using xda premium

Related

[Q] [q] how do I unbrick an amaze that wont go into recovery?

Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Pulsewave said:
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Click to expand...
Click to collapse
Not sure about the Amaze tbh, but if I had a failed flash on either of my HTC phones, I just re RUU'd.
D'oh! I forgot about that! Had to do that for my buddy's thunderbolt a few times. Lemme give that a shot and I'll report back
Edit: Worked
Edit:double post
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Bricked Htc Amaze 4g
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I can get into recovery but it wont let me flash anything.Thanks to whoever replies I really appreciate it.
lmfaoomg said:
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Click to expand...
Click to collapse
You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
samiaziz said:
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I really appreciate it.
Click to expand...
Click to collapse
Same with you. You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
Superwiping the phone removes all the data from the old ROM so you can install a fresh clean ROM.
If you want to install the RUU, you have to relock the bootloader first and then you can reflash the original RUU
Edit: i was misinformed
Sent from my NRGized Amaze...
via xda premium
aj_2423 said:
I dont believe u have to relock
Sent from my NRGized Amaze...
via xda premium
Click to expand...
Click to collapse
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
If the phone wont go into recovery, you have to use ADB and wipe the cache partition for it to go into recovery again. This is apparently a bug with some of recoveries posted by other devs in the development forum. You need to use fastboot.exe to wipe the cache via adb
And if... If the superwipe doesn't work due to recovery version you have try to boot in to your Bootloader run one of hasoon's tool and choose different recovery.. it did happen to me the bootloop before due to the fact the old roms like mike's rom. he doesn't update his script to support the newer recoveries and it doesn't support X's recovery, it will give you an error installation.. just try different recoveries and for sure your problem will be solved..
just make sure boot in your bootloader/H-boot then run hasoon's tool and have enough battery just to make sure...
hasoon2000 said:
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
Thanks for the good info Sir but i my HTC Amaze is bootloader locked and S-ON but i cannot find a RUU for T-mobile to unbrick it. Will a Ruu such as this one work?
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.550L.17DC_30.68.550L.09_release_227343_signed.exe
My HTC Amaze scans all the versions of the PH85IMG i place on the sd card but goes back to the menu when its down
any advice that could help i will appreciate!
There's a thread in the dev section that has about a dozen RUUs. I don't see how one can miss it.
Thanks for your reply but i was a little unsure and did not want to make my phone any worst than it already is.
Can you explain 1 thing thing for me please - RUU always you to flash the phone via the computer? where as PH85img.zip allows you to flash the phone via sdcard? I hope i am correct here.
but i want to know how can i flash the phone when its connected via HBoot usb cause my pc recognizes it as "Android Composite ADB Interface"
Currently this is what is on my lcd
LOCKED
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
EMMC BOOT
MAR 15 2012
i have tried several PH85img.zip files but the phone just scans them and goes back to the menu.
Some help will be appreciated extremely.
---------- Post added at 03:40 PM ---------- Previous post was at 03:33 PM ----------
I forgot to mention it connects to the pc but when i run command adb devices this is what i get
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rquinlan.GOSL_DOM>adb devices
List of devices attached
C:\Documents and Settings\rquinlan.GOSL_DOM>
The latest ruu would be your best option, do not put the .zip part of the name since its already there, also a ruu may be an exe or zip file, since it is a complete stock file to restore the device, what would your carrier be to be exact? Just not up to reading through everything in this thread to see if you mentioned that piece of info, if its tmobile then the very first file in the stock ruu/ota thread would be the file you need.
Sent from my iPad using Tapatalk HD
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Linkzz said:
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Click to expand...
Click to collapse
Why are you using recovery exactly?
RUU's are to be flash via hboot, which is the very first screen you see when you go into the device's bootloader, in the case of exe files, you'll need to flash it via fastboot mode, which happens to be, correct me if I'm wrong, the very first or second option on the hboot menu.
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Linkzz said:
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Click to expand...
Click to collapse
What carrier are you on?
t-mobile
this is the RUU i tried and made a connection but the PH85img.zip are not working no matter how i try
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.55 0L.17DC_30.68.550L.09_release_227343_signed.exe

[Q] Rezound Stuck At Lock Screen

Hi,
I am new here and this is my first post so forgive me if starting a new thread for this topic was wrong but I found my own situation slightly different from the others here who had the same problem.
I have a gsm unlocked rezound and was trying to get rid of the unknown sim error message at lock screen. I followed the steps mentioned on this thread --> http://forum.xda-developers.com/showthread.php?t=1882355. I rooted the phone, downloaded the apk. Deleted the .odex file and replaced the existing apk with the downloaded one and rebooted. Now, I am stuck at the lock screen with no icons. But for the other people who faced similiar issue, they were able to open the home screen. I can't. I can see pop ups for sms/mail. I get ring when a call comes in but I cant pick. I tried hard reset. Tried booting without sim/sd card. Still no luck. I tried connecting the phone to my pc but now my pc wont recognise the phone when its connected. I can see icon on top of the phone which says USB connected and I also see sync icon, but it will not go any further. I dont know how to get into the phone's menu now.
I may have bitten more than I can chew, silly me :crying:
If you guys can help me in any way, I would appreciate that a lot.
OS : 4.0.3 ICS Running HTC Sense 3.6.
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Snuzzo said:
A quick fix:
http://forum.xda-developers.com/showthread.php?t=2017932
Flash my debloater, choosing the Sense option(will be brought to a widget removal screen if you don' use them all) & AOSP lockscreen. Disadvantage to that though, you will have to unlock to see the caller id when it rings.
Click to expand...
Click to collapse
Thank you for the quick response. I have downloaded the file. I know this sounds stupid but I am a real rookie. I don't know how to do the flashing or how to get to the AOSP lock screen. If you could guide me through the process or maybe give me a link where I can learn it myself, it would be great.
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Snuzzo said:
Essentially since you already have rooted, you will(should) also have a custom recovery (TWRP, AmonRa, CWM). Install it as you would a regular rom but without any wipes until after flash of the zip. Dependent on which recovery you will want to look up their FAQ/QnA on how to wipe dalvik/cache.
Once you get inside the script, you will see what I meant by "Choose Sense & AOSP Lockscreen".
Click to expand...
Click to collapse
Yes the phone was rooted, but I used a rooting software from google apps from the phone. After I downloaded that app, it rooted the phone and brought in an extra icon. I remember it as SU root something, but I didnt do it from the pc. So I dont have any recovery on the pc. I used to sync the phone with htc sync. Unfortunately, right now, my pc wont recognise the phone. I tried root explorer for android from pc, it wont recognise the device. HTC sync too will not. But my phone seems to know when a USB is connected, it brings the usb icon on top but thats about it. ((
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Snuzzo said:
Ok, best suggestion at this point is to follow the instruction in the OP for installing TWRP in the Rezound development section.
Click to expand...
Click to collapse
Could you kindly provide me a link to the right topic. Do you think my phone is beyond repair ? Have I bricked it ?
I am running 4.0.3 ICS on Sense 3.6
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Snuzzo said:
http://forum.xda-developers.com/showthread.php?t=1902381
You are far FAR from being bricked. Softbricked yes, hardbricked no.
Click to expand...
Click to collapse
Thank you for the help buddy. I am glad you said its not. I dont know what I would have done if it had. This is my first android phone and I took it a week back. I was beginning to miss my iPhone . Unfortunately the link you provided wont help me because I have no way of restarting phone other than by removing battery. Even when in fastboot, the pc does not recognise the device even when device shows fastboot usb. I doubt if I can get past step 1 in that link.
I found that I am on Vigor H Boot 2.27.000 and Radio 2.22.10.0803r with S-ON. I tried to turn S-Off after reading and educating myself on android from this forum till now. But even to S-Off, I need to be able to enable USB in debug mode which I am not able to. Any suggestions ?
Device still not fixed
hi,
I took the phone to a couple of places to check if it can be fixed, No one was able to fix it thus far, Any other advice or suggestions to fix this would be great. Any admins/mods have something to add ? Please, I am desperate to fix this phone. Anyway of doing this ?
Have you tried flashing a different rom?
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
jon7701 said:
Have you tried flashing a different rom?
Click to expand...
Click to collapse
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
Obaterista93 said:
If he's S-on and locked, he can simply flash the latest RUU can't he(just to get the phone working again). From there someone can help him set up adb, and s-off.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
feralicious said:
From what they posted, somehow they don't have a custom recovery even though they are rooted?
Can you put a PH98IMG.zip file of a recovery (either Amon Ra or TWRP) on your SD card and flash it in hboot? Then flash a custom ROM the same way from recovery.
You can take the SD card out and mount it on your pc and use your pc to copy over the recovery PH98IMG.zip file.
And oh yeah, I see what Obaterista... was saying. You should be able to flash the latest RUU from hboot. Here's a link for it:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
That's global too, which seems to be what you'll need.
Click to expand...
Click to collapse
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
lllR2-D2lll said:
Yes I have vigor, tried AmonRa, that did not work mate. It starts fastboot, gets stuck @ unpacking PH98IMG.diag and then nothing happens.
The bootloader screen says S-On. On top it says ***Tampered*** and below it ***UNLOCKED***.
Yes I rooted from a tool I found on android market. Noob me. So I do not have a recovery. I had downloaded the PH98IMG.zip and put it in my sd card and tried. The recovery starts and then shows a red exclamation and then nothing happens.
I was just trying different pages for help. Someone has mentioned that I should add the PH98IMG.zip as just PH98IMG and I shud not add the .zip. Thats the only thing left to try. I will post what happens when I do that.
Click to expand...
Click to collapse
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
My phone is also soft bricked. I relocked the phone and now it just sits in hboot and won't do anything no matter if I yet to flash the ruu zip file or use the exe ruu.
Currently
Relocked
Hboot 2.10.0000
Believe I am 4.03.605.2 main version, at least that's what the exe file said.
I'm pulling my hair out just trying to any software installed. Help please!
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Obaterista93 said:
What you'll have to do is relock your boot loader, flash the RUU and then unlock again. From there you should be able to flash a recovery and flash a rom.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thanks a tonne. That helped. I am back in the menu now. I am so grateful for ure help. But my problems dont seem to end just yet. Now, my htc sync wont detect the phone. The phone is relocked. I will try unlocking and see if it works, but is that the cause ?
lllR2-D2lll said:
Are you trying with the stock ROM ? If ure saving stock ROM as PH98IMG.zip, then try PH98IMG without the .zip typed in.
Click to expand...
Click to collapse
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
1967ls2 said:
I'm trying to install any Rom. I find can of it is ics or gb. Nothing will load.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I am no expert to give u any suggestions but maybe if you could explain how it got bricked in the first place, someone might be able to give u a better solution mate.

[Q] What have i done? Can only get in bootloader...

Sooo, playing with rooting, been rooted for a couple days, flashed viperlte rom and had problems and decided to take it back to stock for now. Gonna be on the road and can't be 'experimenting'...attempted to go back to stock, by using the original RUU, and as I understood it, I needed to lock the phone back first. Didn't make sense as I was wondering how I could flash a Rom if it was locked back. After locking, when trying to go to recovery, it just comes back to fastboot. I can't get into the main phone--it boots to a screen, but no buttons work, although if i press volume up/down it shows it on the screen. What have I done?! I'll admit being a newb to phones, so please, some guru help me get back to something
Here's what fastboot shows:
TAMPERED
RELOCKED
SECURITY WARNING
Fireball pvt ship s-on rl
Hboot 1.15
Radio 1.53
opendsp v29.1.0.45
emmc-boot
It wouldn't read either of the mini sd-cards I used after rooting, so I can't just get use my sdcard with a new or original rom. I can't get to a main phone screen to turn on usb debugging, so no adp? Any ideas?
zazaray said:
Sooo, playing with rooting, been rooted for a couple days, flashed viperlte rom and had problems and decided to take it back to stock for now. Gonna be on the road and can't be 'experimenting'...attempted to go back to stock, by using the original RUU, and as I understood it, I needed to lock the phone back first. Didn't make sense as I was wondering how I could flash a Rom if it was locked back. After locking, when trying to go to recovery, it just comes back to fastboot. I can't get into the main phone--it boots to a screen, but no buttons work, although if i press volume up/down it shows it on the screen. What have I done?! I'll admit being a newb to phones, so please, some guru help me get back to something
Here's what fastboot shows:
TAMPERED
RELOCKED
SECURITY WARNING
Fireball pvt ship s-on rl
Hboot 1.15
Radio 1.53
opendsp v29.1.0.45
emmc-boot
It wouldn't read either of the mini sd-cards I used after rooting, so I can't just get use my sdcard with a new or original rom. I can't get to a main phone screen to turn on usb debugging, so no adp? Any ideas?
Click to expand...
Click to collapse
download the ruu rename it PJ53IMG THEN transfer it to your sdcard via your computer and put back in phone and boot to bootloader, it should pick up the PJ53IMG, AND ASK YOU IF YOU WANT TO CONTINUE, hit volume up to sat yes.(put sdcard in an adapter and put in your computer to transfer) Also you want 2.17.605.2 ruu software. make sure the zip is on the root of the sdcard(not in a folder, then make sure after you transfer that the file doesn't have 2 zips on it (PJ53IMG.ZIP.ZIP)YOU WANT ONLY ONE ZIP
Aldo101t said:
download the ruu rename it PJ53IMG THEN transfer it to your sdcard via your computer and put back in phone and boot to bootloader, it should pick up the PJ53IMG, AND ASK YOU IF YOU WANT TO CONTINUE, hit volume up to sat yes.(put sdcard in an adapter and put in your computer to transfer) Also you want 2.17.605.2 ruu software. make sure the zip is on the root of the sdcard(not in a folder, then make sure after you transfer that the file doesn't have 2 zips on it (PJ53IMG.ZIP.ZIP)YOU WANT ONLY ONE ZIP
Click to expand...
Click to collapse
Thank you for the response. Tried this, it loaded the zip, then went to 'checking' and after that, back to the bootloader. Never asked me if I wanted to proceed. When rebooted it brought me back to where I was, a phone which appears to be up--clock works, wifi is on, but I can't do anything. I feel pretty confident the img is good. Thoughts?
zazaray said:
Thank you for the response. Tried this, it loaded the zip, then went to 'checking' and after that, back to the bootloader. Never asked me if I wanted to proceed. When rebooted it brought me back to where I was, a phone which appears to be up--clock works, wifi is on, but I can't do anything. I feel pretty confident the img is good. Thoughts?
Click to expand...
Click to collapse
HOW did you put the ruu on the sdcard? from the computer? or usb
Aldo101t said:
HOW did you put the ruu on the sdcard? from the computer? or usb
Click to expand...
Click to collapse
XP PC, formatted fat32, put it on root...just tried a different ruu, searched the exact string, the 2.0... and got it from a xda forum member, so I feel confident in the ruu. It did the same thing, loaded it, checked it for about 2 mins, then returned me to the loader. I noticed SECURITY WARNING is gone from bootloader now, FYI. What else can we try?
zazaray said:
XP PC, formatted fat32, put it on root...just tried a different ruu, searched the exact string, the 2.0... and got it from a xda forum member, so I feel confident in the ruu. It did the same thing, loaded it, checked it for about 2 mins, then returned me to the loader. I noticed SECURITY WARNING is gone from bootloader now, FYI. What else can we try?
Click to expand...
Click to collapse
go to your file explorer and access the ext sdcard and see if the file is PJ53IMG.ZIP
you ARE downloading a zip file and not an image file????
Aldo101t said:
go to your file explorer and access the ext sdcard and see if the file is PJ53IMG.ZIP
you ARE downloading a zip file and not an image file????
Click to expand...
Click to collapse
That is the name of the file and here is the link where I'm downloading the zip file http://forum.xda-developers.com/showthread.php?t=1947600
zazaray said:
That is the name of the file and here is the link where I'm downloading the zip file http://forum.xda-developers.com/showthread.php?t=1947600
Click to expand...
Click to collapse
that's the right one, it should work, ////...????
Aldo101t said:
that's the right one, it should work, ////...????
Click to expand...
Click to collapse
Oh no, not what I wanted to hear Thanks for the help, any other ideas? Anyone else experienced it loading the zip, check it, then nothing happen? I'll do some forum searching...
Can you unlock the bootloader again?
somerandomname1 said:
Can you unlock the bootloader again?
Click to expand...
Click to collapse
I dunno, is there a way to do it from the bootloader? Cause I can't get to a place where I can push adp commands and I can't get to recovery...i've hosed this thing haven't I? I've got insurance, do I need to drop this thing in the sink and get another? And maybe not try rooting the next one...
zazaray said:
I dunno, is there a way to do it from the bootloader? Cause I can't get to a place where I can push adp commands and I can't get to recovery...i've hosed this thing haven't I? I've got insurance, do I need to drop this thing in the sink and get another? And maybe not try rooting the next one...
Click to expand...
Click to collapse
No need for all that just calm down. I'm confused are you stuck n bootloader or can you boot up into your ROM?
http://img716.imageshack.us/img716/3192/1362812254888.png
You said you where relocked right? You must be locked to ruu
Sent from my Incredible 4G LTE using xda app-developers app
zazaray said:
I dunno, is there a way to do it from the bootloader? Cause I can't get to a place where I can push adp commands and I can't get to recovery...i've hosed this thing haven't I? I've got insurance, do I need to drop this thing in the sink and get another? And maybe not try rooting the next one...
Click to expand...
Click to collapse
If you are on my boot loader unlock method just unlock, flash recovery and then a rom
Sent from my TF300T using xda app-developers app
jose51197 said:
If you are on my boot loader unlock method just unlock, flash recovery and then a rom
Sent from my TF300T using xda app-developers app
Click to expand...
Click to collapse
Would you mind posting a link to your unlock method? The method I used the first time was using usb debugging and adp commands from windows. Can I unlock somehow from within the bootloader? Thank you very much for your help. Lol, my phone is ringing at this moment but i've got know way to answer it
Aldo101t said:
You said you where relocked right? You must be locked to ruu
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
Yes, I relocked from the bootloader, as I guess i misunderstood that I needed to do that before flashing the ruu...I was actually on one of the custom roms when I locked it
prairiedogn said:
No need for all that just calm down. I'm confused are you stuck n bootloader or can you boot up into your ROM?
http://img716.imageshack.us/img716/3192/1362812254888.png
Click to expand...
Click to collapse
I CAN boot into the rom, but nothing is accessible...the phone rings if someone calls, beeps alerts for mail notification or txt, but no buttons work and screen is blank(except for wallpaper). I can see the icons connect to wifi and such, so it's working, I guess, sort of...
zazaray said:
Would you mind posting a link to your unlock method? The method I used the first time was using usb debugging and adp commands from windows. Can I unlock somehow from within the bootloader? Thank you very much for your help. Lol, my phone is ringing at this moment but i've got know way to answer it
Click to expand...
Click to collapse
no way to answer it, even
Have you tried wiping everything and flashing a new ROM.
http://img716.imageshack.us/img716/3192/1362812254888.png
prairiedogn said:
Have you tried wiping everything and flashing a new ROM.
http://img716.imageshack.us/img716/3192/1362812254888.png
Click to expand...
Click to collapse
I can't get into recovery or use adp commands from windows, is there another way I can wipe and flash?

[Q] Stuck trying to UnRoot

I have been having the worst time trying to take my Rezound back to stock. I rooted it a long while ago and am now stuck. I was able to relock but still at s-on and I cant seem to find the right RUU exe file to load the system back to stock. Current info is as follows;
HBOOT-2.25.0000
RADIO-1.22.10.0421r/1.22.10.0424r
OpenDSP-v13.6.0.7611.00.0104
eMMC-boot
Image version 3.14.605.12
I am a complete noob so I will need as much simple directions as possible. I am desperate at this point since I cant seem to get it to reload the stock. Every time I use the RUU.exe files
RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9K_release_270509_signed.exe
Found on androidfiles.org/ruu/?developer=Vigor or any of the other ones it fails. Fortunately I have not bricked the phone yet but I am running out of options since android police site has one but says not to use it : This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off (method).
Help please!!!
Try this link here http://shipped-roms.com/index.php?category=android&model=Vigor and download the PH98IMG_ICS_3.14.605.12.zip! Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
izzaeroth said:
Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Okay I am kinda stupid at the moment since I have fried my brain trying everything. How do I flash it? and will that brick my phone since I am S-on?
Beyond5150 said:
Okay I am kinda stupid at the moment since I have fried my brain trying everything. How do I flash it? and will that brick my phone since I am S-on?
Click to expand...
Click to collapse
After you rename it place it on the root directory of the SD card. Then power phone off. Then press volume down + power so it boots into bootloader. There it should ask if you want to update. Tell it yes. It won't brick you as its the same s/w you seem to be on. Worst case it won't flash.
Edit: make sure you verify the md5!
Sent from my ADR6425LVW using xda premium
What message do you get when running the RUU, also what Rom were you running prior to relocking?
Sent from my ADR6425LVW using xda app-developers app
My rezound is semi-bricked currently and I am also looking to get back to stock form. I think the most current ROM that I had on it would be like Infection2.3. But I cannot seem to get past the boot animation and I believe the RUU needs to be actually booted up all the way? I will check the Hboot versions and such when I get home. (I tried a ph98img in the root but when it attempted to flash I got "HBoot version is older than expected, exiting")
Any thoughts?
izzaeroth said:
Try this link here http://shipped-roms.com/index.php?category=android&model=Vigor and download the PH98IMG_ICS_3.14.605.12.zip! Do not download any others. Rename it to PH98IMG.zip and flash in bootloader. It should allow you to flash it.
If I'm incorrect on something someone plz correct it
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Remember to flash a ph98img zip RUU, the bootloader must be relocked and internal storage will also be completely wiped. Backup the contents in recovery using usb mass storage mounts.
Subiesaurus Rex said:
My rezound is semi-bricked currently and I am also looking to get back to stock form. I think the most current ROM that I had on it would be like Infection2.3. But I cannot seem to get past the boot animation and I believe the RUU needs to be actually booted up all the way? I will check the Hboot versions and such when I get home. (I tried a ph98img in the root but when it attempted to flash I got "HBoot version is older than expected, exiting")
Any thoughts?
Click to expand...
Click to collapse
Sounds like all that needs done is a factory reset(wipe caches+data) and wipe system. Re-flash a Sense rom and fastboot flash the matching boot.img. Try my rom Viral OTA, just the data/system wipes prior to flashing and it willk get you back up to 100%. Rememer to reboot to bootloader if using TWRP.

[Q] Stock RUU failed and won't work; basically locked out of phone. Can you help?

Hello. Never made a thread before and was really hoping I wouldn't have to or would find an answer elsewhere.
Since that didn't work out, here's my problem:
Background: Evo 3d, virgin mobile, unlocked bootloader, s-off, hboot was at 1.50, and I don't remember what the radio was at. I was running CM11 and was quite happy until two days ago when I stopped receiving texts! No clue why, just stopped. Hangouts, etc etc. Called VM and they had no idea why that was happening either. Tried switching roms, reinstalling backups, etc etc. Clean wipes and all. Then I saw someone said they had to [for some reason] reinstall everything stock and then they had messaging back. So that's what I set out to do.
In Between: Used the RUU that I'm fairly certain came with my phone. Everything was good, it erased everything, and "updated system" and signatures. It was almost finished when BAM, popped up with error 152 Image Update Error; right at the very end. Quite disappointing. Tried it multiple times again with the same result. Not sure what to do.
Current: Only screen I can see (looks like shortened bootloader screen) says "***locked***" at the top, hboot 1.57.0000, radio 1.06.00.126, then says openADSP-v02.6.0.2226.00.0217eMMc-boot
Also tried flashing the unlock_code.bin, and while it took it, it changed nothing. One screen I did see very briefly but cannot replicate said that everything was there except system. Not really sure how to take that or what to do. Any and all help would be helpful. As is it sits on the HTC screen with exclamation points in each corner. When unplugged from usb it gives me that above screen. Removing battering and restarting to bootloader still gives the same screen.
Did you run ruu through windows or pg86img.zip?
Sent from my Evo 3D CDMA using xda app-developers app
hossman said:
Did you run ruu through windows or pg86img.zip?
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
Through Windows; the RUU exe.
SammyMak said:
Through Windows; the RUU exe.
Click to expand...
Click to collapse
You can try this
https://www.dropbox.com/s/d4baafpgchgg4ef/ruu-PG86IMG.zip
Put that on the root of your SD card and rename to pg86img.zip
Make sure its the only one there
Boot to boot loader and accept updates
It may reboot itself to bootloader, if it asks to accept again then accept
When its done reboot your phone
Rename or remove the file when done
Hope that helps
Sent from my Evo 3D CDMA using xda app-developers app
So I have my phone working now. I think it was the RUU.exe that I was using. I downloaded a different one from here http://androidruu.com/Shooter/ after much googling. That finally restored it to original VM stock rom etc. I couldn't use your method of placing the zip onto the root of my SD because despite it being there, it wouldn't go through the normal search for the file. I would remove the battery, put it back in, use the button key combo to try and open to bootloader, and it would go but it would be the page with the status and then it would instantly go back to the black screen with HTC logo.
Thank you for your help though!
Also I'm not sure how useful exactly this will be for anyone else, but if you find yourself ruu'd and needing better files...
The hboot ENG 1.04 I got from here: http://forum.xda-developers.com/showthread.php?t=1817513
ALL other downloads of that hboot did not work AT ALL.
I got the updated radio from here: http://androidforums.com/cdma-evo-3d-all-things-root/648902-radios-hboot-firmware-all-downloads.html
The hboots on that site however are stock and most likely won't run the custom roms as well, if at all, as 1.04.
SammyMak said:
I got the updated radio from here: http://androidforums.com/cdma-evo-3d-all-things-root/648902-radios-hboot-firmware-all-downloads.html
But the hboots on the site aren't helpful fyi
Click to expand...
Click to collapse
Hey, that's my thread. Just curious what you mean by the hboots aren't helpful?
If there is a problem I'm unaware of, I'd be happy to know what it is so I can get it squared away.
hossman said:
You can try this
https://www.dropbox.com/s/d4baafpgchgg4ef/ruu-PG86IMG.zip
Put that on the root of your SD card and rename to pg86img.zip
Make sure its the only one there
Boot to boot loader and accept updates
It may reboot itself to bootloader, if it asks to accept again then accept
When its done reboot your phone
Rename or remove the file when done
Hope that helps
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
thank you!
Brian706 said:
Hey, that's my thread. Just curious what you mean by the hboots aren't helpful?
If there is a problem I'm unaware of, I'd be happy to know what it is so I can get it squared away.
Click to expand...
Click to collapse
I must apologize! I seem to have mis stated that; they are helpful with regards to them being the stock hboots. However in my particular case those stock hboots weren't for me. I'll edit that here in a sec, but if I was going back to full stock I'd definitely use your stock VM hboot and it would be helpful in that case. Hope that makes sense, no disrespect meant!
SammyMak said:
I must apologize! I seem to have mis stated that; they are helpful with regards to them being the stock hboots. However in my particular case those stock hboots weren't for me. I'll edit that here in a sec, but if I was going back to full stock I'd definitely use your stock VM hboot and it would be helpful in that case. Hope that makes sense, no disrespect meant!
Click to expand...
Click to collapse
Thanks for clarifying that! I see what you meant now.
No worries, I didn't take offense or think you were disrespectful; I just wanted to make sure the downloads were working properly!
And for the record, the stock hboots will work just fine with custom roms. Hboot 1.50 for example will be compatible with the same selection of roms as JuopunutBear 1.50.5050. The difference is that JuopunutBear is patched and will allow for extra fastboot commands and allow them to be run on a locked bootloader.
The eng 1.04 hboot allows for extra fastboot commands that the stock hboot cannot. But you can boot any rom out there on the stock hboots. I've used stock 1.50 forever on this device.

Categories

Resources