Switch between ICS CM AND ICS CN ROM's - TouchPad General

Howdy All !
I have the Classicnerd ICS v3 ROM installed on my TP, would like to switch to CM A2 ROM to check out their HD video stuff along with netflix. So what do i need to do. Can someone put some steps for newb's like me on how to switch back n forth between these lovely pieces of work.
Thanks

ncube2 said:
Howdy All !
I have the Classicnerd ICS v3 ROM installed on my TP, would like to switch to CM A2 ROM to check out their HD video stuff along with netflix. So what do i need to do. Can someone put some steps for newb's like me on how to switch back n forth between these lovely pieces of work.
Thanks
Click to expand...
Click to collapse
I don't think you can simply switch but you can experiment fairly easily using Nandroid backups
1) ReBoot into recovery
2) Backup current ROM (e.g. CN)
3) Install CM A2
a) format system, cache, wipe Dalvik
b) Flash new ROM (e.g. alpha2)
c) Flash Gapps
4) Reboot system and set up Alpha2, your apps and basic set up should still be OK from CN
5) Reboot into recovery again
6) Backup new ROM (e.g. alpha2)
To switch between then reboot to recovery and Restore chosen ROM and reboot. Note that will fully restore so any updates to data partition e.g. new apps downloaded will get lost unless you take a new back up.
The other things to consider is the space in the boot partition and the moboot default. There should be enough space in boot to accomodate both the uImage files but if not then you need to clean out the CN one before making the alpha2 install. A CN install will have created a moboot.default to try to start CN. An Alpha2 install will not touch moboot.default. If you leave it on alpha2 and want it to default boot into that then you will need to create a new moboot.default file.

Related

Problems going from cyanogenmod 7.1 -> stock

Hi
I have flashed the cyanogenmod 7.1.0 on my htc legend which went fine, but after som time i realized the gps wasn't working, i tried for severel hours all kinds of gps fix advices i found in google but without any luck.
Because of this i want to go back to stock android 2.2 or 2.3 if possible.
I am having some problems returning to stock android and again tried severel guides.
I tried downloading the newest htc sync and run a RUU update but the updater can not connect to the phone, no htc sync support in cyanogenmod is the problem i think.
I tried downloadning severel different image files of different versions of android on to the sd card and rebot to recovery mode throug clockwork and tried flash a zip file from sd card. But either the update stops because the file is "bad" or it need a newer version of something the cyanogenmod updated when it was installed.
I can see i should be able to do a nandroid backup if i have made such one, guess the guide i used didnt mention that, only i shoud remember to backup my pictures/music/sms....
If you need any more information please ask
Hi,
try this sequence:
1. Open ROM manager application
2. Scroll down to "All clockworkMod recoveries" and click on it
3. choose from that list 2.5.0.7 and press OK
4. Now download a sense ROM from XDA like Blay0's ROM here http://forum.xda-developers.com/showthread.php?t=866849 (if you want to keep this rom download also the patch for upgrade to b0.8.4)
5. Copy the ROM and patch to the SD card
6. From the ROM manager reboot into recovery
7. In recovery mode wipe data and cache
8. Still in recovery mode instal zip from SD card: first the b0.8 ROM and then the b0.8.4 patch
9 Reboot
Now you should have a stock based ROM and do whatever you like (go back to really stock rom which I don't reccommend)
Let me know how it works!
Thanks ill give it a try

A Noob's Bootloop Solution for the AOSP 4.0.4 ICS [Multi-Source] ROM

Below is a step-by-step guide for fixing the Bootloop issue on TwistedUmbrella's AOSP 4.0.4 ICS ROM [Multi-Source]
Please know that while I am a self-confessed noob, I have done my homework. I don't think that I've done anything special here but after seeing continued posts about this issue, I figured maybe this was something that people hadn't thought of yet. The instructions are for 4ext Recovery and I have tried to make them as plain and simple as possible. Let me know if anything is unclear.
Dirty
1. Create Backup. (A full backup is recommended but an Advanced backup of just the Boot partition will suffice here)
2. Wipe Cache+Dalvik.
3. Install ROM from SD card.
4. Advanced Restore - Boot. (From full Backup or Advanced based on what you did in Step 1)
5. Optional: Install desired Playground Extras.
6. Reboot.
Clean
1. Create full Backup.
2. Format All Partitions (except SD card).
3. Install ROM from SD card.
4. Advanced Restore - Boot and Data.
5. Optional: Install desired Playground Extras.
6. Reboot.
I tried to find another relevant thread before creating this post but only found this one and I just don't know how many people, if any, will see my response there.
Let me now how this works for you guys. And please, be kind in your responses. I am new and just want to help
If it's just the kernel, or something else in the boot.img that's corrupt, or causing a bootloop on a specific rom build, you could always take one from an earlier build of that rom that you know worked.
Then just drag and drop the boot.img and associated modules into the rom.zip from the old rom to the new rom on a computer with 7zip or winrar, flash it, and hopefully boot.
Just thought it might save a step or two for those that are having this type of issue.
call me a noob....but can someone explain to me what is so great about 4ext? I've been using TWRP since it was first available for the tbolt and I've been able to flash every version of twisted's ICS rom with no bootloops at all...

[Q] Backup/Restore Dual Boot

I have built Pure HD v4.0c as my Rom1, and Omega v44.3 as my secondary. Everything seems to be working well so I booted to Primary Recovery and ran a backup. I connected my phone to PC and went to /clockworkmod/backup and there was my new back up, with this morning's date.
By size, it looks like the backup has done both primary and secondary. If so, am I able to do an 'Advanced Restore' and restore just one partition? I want to run Purelook v5 onto the Primary partition and some questions are...
1. Will the new ROM affect the dual boot setup? (I will install it with Siyah and I have the DL of Siayh if I can't get STweaks to work after the install)
2. If I run an Aroma install with full wipe, do I lose the 2nd boot setup? If so, which 'Wipe' actions can I do to clean the new boot area as much as possible for the new ROM? (e.g. cache, dalvik etc.)
I managed to get my dual boot set up working how I want. I wanted to trial Omega 6 AOKP as my 2nd ROM - I used STweaks to get into 2nd ROM tools and wiped cache there and Dalvik. The I tried to run the Omega install - got part way through the screens and it hung. I gave it some time but ended up using the power button, then back into primary tools and Restore from my Nandroid.
Anything I did wrong or should I just try it again?

[Q] CyanogenMod 10.1.3 How to install on S2?

I've recently downloaded the Stable version of CM and I don't know how to install it, after installing it will I lose my data? App game datas?
Thanks a lot
True. When you install a new rom you should wipe data. Otherwise it crashes on startup. You can back up the data that
duykhanh187 said:
True. When you install a new rom you should wipe data. Otherwise it crashes on startup. You can back up the data that
Click to expand...
Click to collapse
So how do I install it?
I've looked into the other installation guides but those are for CM10.2 (Andorid 4.3) so I think its different installation method from 10.1, but I cant find a tutorial
C'mon...Read the first page of the CM10 thread & follow the installation instructions. Doesn't take a MENSA member to get it done
If you have used titanium backup root hayz to backup game data. Want to install a new ROM to install it into RECOVERY. If the rom you download it tails. ZIP Remember to wipe data + cache + dakvil before.
My device GT-i9100G
note: im always start all my flash from stock ROM (meaning stock JB 4.1.2)
my usual method, all can be done in the phone, no need odin if youre already stock;
-download all related file, CM10.1.3, CM GApps, Blazing kernel v8 (if you dont want your binary counter to change)...put them in external SD
-boot into recovery, select apply update from external storage, select file blazing kernel v8, let it finish and reboot normally
-then reboot into recovery again and install your Cm10.1.3 and GApps by navigating to your external SD (sorry cant remember the path)
-after finish installing both above file, let it reboot...if bootloop, reboot back into recovery and wipe data, cache and dalvik, and then reboot
now your CM10.1.3 is ready~
-hit thanks if my post helps you-

About Flashing Custom ROM (RR/PA) on LG G3 D855

Greetings everyone. I wish to know more about flashing Resurrection Remix...
I watched the brief instruction on official XDA thread but I wish to know more detail...
- Current Phone Status -
My G3 D855, 32 GB memory, is running stock Android 4.4.2, ROM version “V10n-HKG-XX”, stock recovery, rooted with PurpleDrake (script by xda developer”. Kernel version 3.4.0. All things are stock except I have rooted, with SuperSU.
- Reason of wanting to flash Remix ROM -
I wish to change resolution to 1080x1920, even 720x1280. So I did this using build.prop editing and “wm size 1080x1920”,“wm density 480”. However in stock rom, build in LG apps like Phone, Messaging, Calender will crash. I fix this by installing Xposed & app settings with DPI 530. But I don’t quite want this to be the solution...
Plus I noticed there really are battery difference between 1440x2560 and lower resolution. So I started to think about custom Rom. I found that Resurrection Remix and Paranoid Android are quite slim, good looking, most importantly very customizable.
And Stock ROM has many software that I don’t need, so I wish to give it a try.
- My question -
I haven’t flash any custom rom before (I have flashed on my previous phone but messed up quite a bit).
- So I wished to know what is the prerequisite, anything that need to pay good attention into? I want to avoid bootloop or hard brick...
- Should I install official TWRP recovery on my current status and make a full system backup image? (is that called nandroid backup?)
- If any error occured, can I use TWRP recovery to restore everything in my current status (everything in stock but have root access)?
- Are the custom roms contain build-in Root access? Because I want the phone to be rooted.
- I use LG Flash tool 2014 to flash stock firmware kdz files), with CRC method to completely wipe the phone and back to stock. Is this method still applicable if I want to back to stock after flashing RR rom? Because I want everything to be clean each time I flash a new system...
- I watched YouTube video that changing AOSP rom resolution won’t mess up icons or apps. So I can still receive SMS, dial, calender sync to Google etc. Correct?
--------------------
Finally, I wish to flash the latest STABLE version of the Remix ROM / Paranoid Android ROM. Would be good to hear some recommendations. I wish things to be more customizable and slim. Thanks for reading this long article in advance!
Vulturon said:
- My question -
I haven’t flash any custom rom before (I have flashed on my previous phone but messed up quite a bit).
- So I wished to know what is the prerequisite, anything that need to pay good attention into? I want to avoid bootloop or hard brick...
- Should I install official TWRP recovery on my current status and make a full system backup image? (is that called nandroid backup?)
- If any error occured, can I use TWRP recovery to restore everything in my current status (everything in stock but have root access)?
- Are the custom roms contain build-in Root access? Because I want the phone to be rooted.
- I use LG Flash tool 2014 to flash stock firmware kdz files), with CRC method to completely wipe the phone and back to stock. Is this method still applicable if I want to back to stock after flashing RR rom? Because I want everything to be clean each time I flash a new system...
- I watched YouTube video that changing AOSP rom resolution won’t mess up icons or apps. So I can still receive SMS, dial, calender sync to Google etc. Correct?
--------------------
Finally, I wish to flash the latest STABLE version of the Remix ROM / Paranoid Android ROM. Would be good to hear some recommendations. I wish things to be more customizable and slim. Thanks for reading this long article in advance!
Click to expand...
Click to collapse
1- you're good to go now, you don't need any prerequisite, you should pay attention to the steps you make to flash TWRP and rom not to do it wrong.
2-yes you should install latest official TWRP for your phone and backup these partitions (system, data, boot, efs -if available-), and that is nandroid backup, and you will use TWRP to flash RR or PA.
3-yes you can restore from nandroid backup.
4-yes both roms has built-in root access that can be activated from developer options, and you can simply flash SuperSU.zip in recovery after the rom and gapps to use SuperSU app to manage root access if you don't like the built-in root.
5-yes this method is still applicable, because all you need to get back to your stock or flash another rom is wipe (system, data, cache, dalvik cache) and flash the rom, so as long as the tool does that, then you're good.
Also if you're not sure you can do the wiping in TWRP first, then boot into download mode and then flash with the tool.
6-changing dpi in custom roms may cause some apps to crash, however i don't recommend lowering the dpi value too much or you will get some issues like that.
Regards. Migo
MigoMujahid said:
1- you're good to go now, you don't need any prerequisite, you should pay attention to the steps you make to flash TWRP and rom not to do it wrong.
2-yes you should install latest official TWRP for your phone and backup these partitions (system, data, boot, efs -if available-), and that is nandroid backup, and you will use TWRP to flash RR or PA.
3-yes you can restore from nandroid backup.
4-yes both roms has built-in root access that can be activated from developer options, and you can simply flash SuperSU.zip in recovery after the rom and gapps to use SuperSU app to manage root access if you don't like the built-in root.
5-yes this method is still applicable, because all you need to get back to your stock or flash another rom is wipe (system, data, cache, dalvik cache) and flash the rom, so as long as the tool does that, then you're good.
Also if you're not sure you can do the wiping in TWRP first, then boot into download mode and then flash with the tool.
6-changing dpi in custom roms may cause some apps to crash, however i don't recommend lowering the dpi value too much or you will get some issues like that.
Regards. Migo
Click to expand...
Click to collapse
Mr. Migo, thank you for replying. But I have more to ask/... Sorry for being annoying, because I am a beginner and I wish to make things clear, to minimize the chance of accident...
1. you said i'm good to go now, but shall i need to .kdz flash the stock v21a-HKG-xx which is Android 5.0 first? because i remeber RR rom's post in xda said i should upgrade to 5.0 first... i'm not quite sure...
https://forum.xda-developers.com/lg-g3/development/rom-t3507493
above is the link of the rom, I wish to know is my phone appropriate for doing this before everything... Hope Mr. migo you can have a look for me when you have time...
2. regarding twrp recovery, i read this: https://forum.xda-developers.com/lg-g3/development/recovery-twrp-3-0-0-0-t3309475?nocache=1 however in the official download link it said twrp for d855 europe... I'm D855 but not europe... If I want to flash official latest twrp recovery, shall i use 'twrp manager' from google play?
plus, it said i should backup the original stock recovery, how do i do that?
3. Doing a full nandroid backup which can be used to completely restore current status, only including 'system, data, boot, efs', the 4 partition, correct? because i didn't use any custom recovery before, so i wish to know more... any other things need to pay attention before doing a full nandroid backup?
4. I wonder which version of Gapps I should flash / appropriate for the RR remix... the post said Download Gapps (ARM 7.1 Pico/Nano/Other), but which I should use? 'cuz it is essential I think...
5. Hope you can check my understanding below: if i want to flash RR rom now, should:
--- flash official latest twrp recovery
--- go to recovery mode (twrp) & backup 'system, data, boot, efs', the 4 partition in ext.sd card
--- still in twrp recovery, do 4 wipes 'system, data, cache, dalvik cache' (I want a very clean installation, not 1 byte of previous rom data will be left, so how can i wipe it to very clean status?)
--- after 4 or 5 wipes, do i need to press 'factory reset', 'wipe cache partition' these 2 options?
--- alright after all the cleaning, still in recovery while the device is like a shell (nothing, no OS inside), browse to ext.sd card which I will be putting the .zip ROM file, and flash it.
--- after completing flashing, do i need to press 'factory reset', 'wipe cache partition' these 2 options?
--- then I shall flash gapps?
--- then, reboot device, and I am done?
6. I want to know is this ROM really appropriate for my phone... because all those screenshots are in foreign language, not even English, I live in Hong Kong and I bought this phone in Hong Kong... So will the RR remix rom not compatible with certain regions...
7. Again this link: https://forum.xda-developers.com/lg-g3/development/rom-t3507493 below 'Download on AndroidFileHost (AFH)', there are several version built in diff. dates. It seems that the latest build is Nougat android 7.0...? Willing to try that, but is it better for me to go to Resurection remix official site and search for d855, then download the latest, stable (not Nightly) builds?
8. This is how i change DPI. I calculate using dpi calculator, 1440x2560, 5.5inch device should have 534.06... dpi, then i use nomone resolutrion changer to view the default settings (1440x2560, 5.5inch = 640 dpi), then 640 / 534.06 = 1.19836...
then, dpi calculator agaim -> 720x1280, 5.5inch device should have 267.6532... dpi, then 267.6532 times 1.19836 = 320, I will do this in terminal with command 'wm size 720x1280', then 'wm density 320'. and go to build.prop, find "ro.lcd.sf.density' change value to 320, then reboot.
Is my method correct? I think it is not too low... Approproate value for 720x1280 res. monitor.
----------
That's all for now, sorry for so many questions... really... I just wish to minimize and get everything clear before proceeding, since this can be dangerous... thanks a ton Mr. Migo.
Vulturon said:
Mr. Migo, thank you for replying. But I have more to ask/... Sorry for being annoying, because I am a beginner and I wish to make things clear, to minimize the chance of accident...
1. you said i'm good to go now, but shall i need to .kdz flash the stock v21a-HKG-xx which is Android 5.0 first? because i remeber RR rom's post in xda said i should upgrade to 5.0 first... i'm not quite sure...
https://forum.xda-developers.com/lg-g3/development/rom-t3507493
above is the link of the rom, I wish to know is my phone appropriate for doing this before everything... Hope Mr. migo you can have a look for me when you have time...
2. regarding twrp recovery, i read this: https://forum.xda-developers.com/lg-g3/development/recovery-twrp-3-0-0-0-t3309475?nocache=1 however in the official download link it said twrp for d855 europe... I'm D855 but not europe... If I want to flash official latest twrp recovery, shall i use 'twrp manager' from google play?
plus, it said i should backup the original stock recovery, how do i do that?
3. Doing a full nandroid backup which can be used to completely restore current status, only including 'system, data, boot, efs', the 4 partition, correct? because i didn't use any custom recovery before, so i wish to know more... any other things need to pay attention before doing a full nandroid backup?
4. I wonder which version of Gapps I should flash / appropriate for the RR remix... the post said Download Gapps (ARM 7.1 Pico/Nano/Other), but which I should use? 'cuz it is essential I think...
5. Hope you can check my understanding below: if i want to flash RR rom now, should:
--- flash official latest twrp recovery
--- go to recovery mode (twrp) & backup 'system, data, boot, efs', the 4 partition in ext.sd card
--- still in twrp recovery, do 4 wipes 'system, data, cache, dalvik cache' (I want a very clean installation, not 1 byte of previous rom data will be left, so how can i wipe it to very clean status?)
--- after 4 or 5 wipes, do i need to press 'factory reset', 'wipe cache partition' these 2 options?
--- alright after all the cleaning, still in recovery while the device is like a shell (nothing, no OS inside), browse to ext.sd card which I will be putting the .zip ROM file, and flash it.
--- after completing flashing, do i need to press 'factory reset', 'wipe cache partition' these 2 options?
--- then I shall flash gapps?
--- then, reboot device, and I am done?
6. I want to know is this ROM really appropriate for my phone... because all those screenshots are in foreign language, not even English, I live in Hong Kong and I bought this phone in Hong Kong... So will the RR remix rom not compatible with certain regions...
7. Again this link: https://forum.xda-developers.com/lg-g3/development/rom-t3507493 below 'Download on AndroidFileHost (AFH)', there are several version built in diff. dates. It seems that the latest build is Nougat android 7.0...? Willing to try that, but is it better for me to go to Resurection remix official site and search for d855, then download the latest, stable (not Nightly) builds?
8. This is how i change DPI. I calculate using dpi calculator, 1440x2560, 5.5inch device should have 534.06... dpi, then i use nomone resolutrion changer to view the default settings (1440x2560, 5.5inch = 640 dpi), then 640 / 534.06 = 1.19836...
then, dpi calculator agaim -> 720x1280, 5.5inch device should have 267.6532... dpi, then 267.6532 times 1.19836 = 320, I will do this in terminal with command 'wm size 720x1280', then 'wm density 320'. and go to build.prop, find "ro.lcd.sf.density' change value to 320, then reboot.
Is my method correct? I think it is not too low... Approproate value for 720x1280 res. monitor.
----------
That's all for now, sorry for so many questions... really... I just wish to minimize and get everything clear before proceeding, since this can be dangerous... thanks a ton Mr. Migo.
Click to expand...
Click to collapse
1-sorry i didn't know that you have a lollipop update, yes you must upgrade to lollipop first to have the latest bootloader.
2-about TWRP, if the model number is d855, so it's for you, the country won't matter, like for me if i have i9100g so i can't flash TWRP for the i9100, so if you are sure about the model number then it's ok.
You can flash it with adb or by using flashify app from phone, you don't have to use the TWRP app.
As your phone is already rooted, you can backup stock kernel and stock recovery using Flashify app, just download it from playstore and open it, grant root access and choose the tile "backup/restore" and you will see the options to backup stock kernel and recovery.
4- gapps are not complicated, "ARM" is your processor architecture, "7.1" is the android version you choose based on the rom you are flashing, "Pico, Nano.." these are the gapps types, pico has the least requirements to run the play store, Nano has extra functionality that isn't available in play store, and micro has more apps..and so on, However, if you want to understand more about it, you can read the wiki of each package from here.
5- flash the TWRP, in recovery backup is based on the phone partitions, every phone has those 3 partitions (system, data, boot) some phones have efs and some not, so when you are in recovery you will see what part are available to backup, now for wiping, you only need to wipe once not 3 or 4 times!, navigate to wipe and choose advanced wipe and mark (system, data, cache, dalvik cache) and swipe to wipe, you won't need to use "factory reset/wipe cache partition" option at all, now flash the Rom and then Flash Gapps directly, no wipe between, now reboot and wait, that's it!!
6- as i told you in (2), your model number is d855 and the rom is for d855 then it's compatible with your phone, people use their own language in their phones so don't let that bother you.
7- RR remix doesn't have nightlies and never called stable it's only official, if you go to the download page of RR of your phone in sourcefrog you will see only "official" and the "nightly" folder will be empty, however, latest build for you is in 12/2 but i don't know what CK is in the file name, i suggest you ask in the rom thread what CK mean because i don't know.
8- in nogut you don't have to do any calculations, in display settings of the rom, there is an option called "screen size" where you can adjust it to (small, smaller, smallest, normal), anyway you method can do the job if you didn't like this new feature in nogut.
OMG, i never wrote that much..?
-------------------------------------------------------
Hope i helped you ?, don't forget to press the "thanks" button..just for support ?
MigoMujahid said:
1-sorry i didn't know that you have a lollipop update, yes you must upgrade to lollipop first to have the latest bootloader.
2-about TWRP, if the model number is d855, so it's for you, the country won't matter, like for me if i have i9100g so i can't flash TWRP for the i9100, so if you are sure about the model number then it's ok.
You can flash it with adb or by using flashify app from phone, you don't have to use the TWRP app.
As your phone is already rooted, you can backup stock kernel and stock recovery using Flashify app, just download it from playstore and open it, grant root access and choose the tile "backup/restore" and you will see the options to backup stock kernel and recovery.
4- gapps are not complicated, "ARM" is your processor architecture, "7.1" is the android version you choose based on the rom you are flashing, "Pico, Nano.." these are the gapps types, pico has the least requirements to run the play store, Nano has extra functionality that isn't available in play store, and micro has more apps..and so on, However, if you want to understand more about it, you can read the wiki of each package from here.
5- flash the TWRP, in recovery backup is based on the phone partitions, every phone has those 3 partitions (system, data, boot) some phones have efs and some not, so when you are in recovery you will see what part are available to backup, now for wiping, you only need to wipe once not 3 or 4 times!, navigate to wipe and choose advanced wipe and mark (system, data, cache, dalvik cache) and swipe to wipe, you won't need to use "factory reset/wipe cache partition" option at all, now flash the Rom and then Flash Gapps directly, no wipe between, now reboot and wait, that's it!!
6- as i told you in (2), your model number is d855 and the rom is for d855 then it's compatible with your phone, people use their own language in their phones so don't let that bother you.
7- RR remix doesn't have nightlies and never called stable it's only official, if you go to the download page of RR of your phone in sourcefrog you will see only "official" and the "nightly" folder will be empty, however, latest build for you is in 12/2 but i don't know what CK is in the file name, i suggest you ask in the rom thread what CK mean because i don't know.
8- in nogut you don't have to do any calculations, in display settings of the rom, there is an option called "screen size" where you can adjust it to (small, smaller, smallest, normal), anyway you method can do the job if you didn't like this new feature in nogut.
OMG, i never wrote that much..
-------------------------------------------------------
Hope i helped you , don't forget to press the "thanks" button..just for support
Click to expand...
Click to collapse
Sir you helped me alot, no problem I pressed the thanks button! But can I continue asking? Won't be too much I guess, hope I didn't bother your time...
1. That means I have to use LG Flash tool to flash stock 5.0 firmware (.kdz)? Which is 'V21a-HKG-XX'. But stock firmware 6.0 (V30c-HKG-XX) had released too. What exactly should I do beforehand...? Because before you said I am good to go but there seems to be something missing...... I am not challenging you sir, I just want to be sure and not missing any important steps so that my phone turns dead... (for sure information I wish to flash resurrection remix latest official 7.0 Nougat firmware)
2. So if what said in (1) is true, I need to flash stock 5.0 or 6.0 kdz first to turn the phone into clean stock 5.0/6.0, root it , then use Flashify to backup stock kernel/recovery (these are 2 things? I thought that was the same thing...), correct?
3. I found twrp recovery here: https://twrp.me/devices/lgg3europe.html by typing 'device' on the upper right, then type D855, all it appeared is only "TWRP for LG G3 Europe"... Plus, I notice in ROOT G3.com that twrp had different version for Android 5.0 and 6.0... So I am confused again, because if the above link is official website for twrp, it didn;t state that lollipop(5.0) and kitkat(4.4) has different twrp...
4. Derived from (3), as I am not sure which twrp .zip file should I download, I saw on official twrp web that it recommends "official twrp app" to install the recovery, I think it can detect my device and find the only appropriate one for me? I saw quite some people flash it using Flashify app, but I just want to know more and make it clear...
5. https://forum.xda-developers.com/lg-g3/development/rom-t3543815 <- In this page, I found
"ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4.2/6.0 + TWRP
Based On: LineageOS"
On below. Is that mean 4.4.2 or 6.0 as the current system android version is also okay for flashing it?
6. In this page, which is another RR rom "stating" it is official: https://forum.xda-developers.com/lg-g3/development/rom-t3507493, said that:
GApps - opengapps.org (ARM-7.1-PICO)
On below. Firstly, can I download Gapps on here: http://opengapps.org/?
If possible, than shall I choose like what it said, ARM, then 7.1, then PICO ( yes I think I only need minimum package)? Because I am not sure I should use 7.0 or 7.1, and ARM or ARM64...
7. Seems there are quite many version of RR, I googled "resurrection remix' go to their offical page, redirected me to sourceforge, https://sourceforge.net/projects/resurrectionremix/files/d855/Official/ I think I will download the latest date "20170110" version. If I am not wrong this should be the official not nightlies build (you will notice there are nightlies).
Refer back to (6), which type of Gapps should I use... AMR64, ARM, 7.0? 7.1?
8. So wiping 'system, data, cache, dalvik cache' these 4 things will really erase all things and get clean enough?
Also, https://forum.xda-developers.com/lg-g3/development/rom-t3543815 here, below:
-INSTALLATION INSTRUCTIONS-
- Download the latest build
- Download Gapps (ARM 7.1 Pico/Nano/Other)
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest TWRP 3.x Recovery
- Flash Gapps
- Reboot.
- Enjoy!
They recommend press factory reset... Should I do the same? Is it better to press because if the 4 wipe 'system, data, cache, dalvik cache' is clean enough then reset is not needed...
--------------------------------
Opps....... Really sorry sir... When reading your reply one by one that much question appeared again... Really sorry, hope you don't find me annoying... SInce you are the only one reponded and you are experienced, so I wish to grap the chance to learn about it... Thanks a ton. You can have as many thanks button pressed if you want, I have no problem!
Vulturon said:
Sir you helped me alot, no problem I pressed the thanks button! But can I continue asking? Won't be too much I guess, hope I didn't bother your time...
1. That means I have to use LG Flash tool to flash stock 5.0 firmware (.kdz)? Which is 'V21a-HKG-XX'. But stock firmware 6.0 (V30c-HKG-XX) had released too. What exactly should I do beforehand...? Because before you said I am good to go but there seems to be something missing...... I am not challenging you sir, I just want to be sure and not missing any important steps so that my phone turns dead... (for sure information I wish to flash resurrection remix latest official 7.0 Nougat firmware)
2. So if what said in (1) is true, I need to flash stock 5.0 or 6.0 kdz first to turn the phone into clean stock 5.0/6.0, root it , then use Flashify to backup stock kernel/recovery (these are 2 things? I thought that was the same thing...), correct?
3. I found twrp recovery here: https://twrp.me/devices/lgg3europe.html by typing 'device' on the upper right, then type D855, all it appeared is only "TWRP for LG G3 Europe"... Plus, I notice in ROOT G3.com that twrp had different version for Android 5.0 and 6.0... So I am confused again, because if the above link is official website for twrp, it didn;t state that lollipop(5.0) and kitkat(4.4) has different twrp...
4. Derived from (3), as I am not sure which twrp .zip file should I download, I saw on official twrp web that it recommends "official twrp app" to install the recovery, I think it can detect my device and find the only appropriate one for me? I saw quite some people flash it using Flashify app, but I just want to know more and make it clear...
5. https://forum.xda-developers.com/lg-g3/development/rom-t3543815 <- In this page, I found
"ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 4.4.2/6.0 + TWRP
Based On: LineageOS"
On below. Is that mean 4.4.2 or 6.0 as the current system android version is also okay for flashing it?
6. In this page, which is another RR rom "stating" it is official: https://forum.xda-developers.com/lg-g3/development/rom-t3507493, said that:
GApps - opengapps.org (ARM-7.1-PICO)
On below. Firstly, can I download Gapps on here: http://opengapps.org/?
If possible, than shall I choose like what it said, ARM, then 7.1, then PICO ( yes I think I only need minimum package)? Because I am not sure I should use 7.0 or 7.1, and ARM or ARM64...
7. Seems there are quite many version of RR, I googled "resurrection remix' go to their offical page, redirected me to sourceforge, https://sourceforge.net/projects/resurrectionremix/files/d855/Official/ I think I will download the latest date "20170110" version. If I am not wrong this should be the official not nightlies build (you will notice there are nightlies).
Refer back to (6), which type of Gapps should I use... AMR64, ARM, 7.0? 7.1?
8. So wiping 'system, data, cache, dalvik cache' these 4 things will really erase all things and get clean enough?
Also, https://forum.xda-developers.com/lg-g3/development/rom-t3543815 here, below:
-INSTALLATION INSTRUCTIONS-
- Download the latest build
- Download Gapps (ARM 7.1 Pico/Nano/Other)
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest TWRP 3.x Recovery
- Flash Gapps
- Reboot.
- Enjoy!
They recommend press factory reset... Should I do the same? Is it better to press because if the 4 wipe 'system, data, cache, dalvik cache' is clean enough then reset is not needed...
--------------------------------
Opps....... Really sorry sir... When reading your reply one by one that much question appeared again... Really sorry, hope you don't find me annoying... SInce you are the only one reponded and you are experienced, so I wish to grap the chance to learn about it... Thanks a ton. You can have as many thanks button pressed if you want, I have no problem!
Click to expand...
Click to collapse
1- ok, when they said rom firmware required:4.4.2/6.0
I believe that it's ok to root and backup the recovery, and directly start the process of flashing, because you already have 4.4.2 installed which is kitkat and it's compatible with latest TWRP, you can make sure by re-asking in the rom thread if you can directly install the rom right now or upgrade the firmware to 6.0 first.
2-(2) is connected to (1)
3- just use the latest TWRP you find for your phone in the official TWRP page, you don't have to use TWRP app, you can flash it with flashify, but it's OK if you want to use TWRP app, in fact, it's more safe to use it, and it has nothing to do with your android version because you will format the phone after all.
4-(4) is connected to (3)
5-(5) is connected to (1) and (2)
6-you choose ARM then 7.1 then pico or nano
and again, you must know that android version must be known in order to choose right, so if it's 7.0 then choose 7.0 gapps, and if it 7.1 or 7.1.1 the choose 7.1 gapps.
7- (7) is connected to (6)
8-yea. Wiping those 4 is completely enough, and don't worry about (factory reset) because it's a part of the full wipe, (factory reset) means wiping data, cache, and dalvik cache, which is already a part of the wiping process.
No problem, it's ok to ask, we all want things to go well
MigoMujahid said:
1- ok, when they said rom firmware required:4.4.2/6.0
I believe that it's ok to root and backup the recovery, and directly start the process of flashing, because you already have 4.4.2 installed which is kitkat and it's compatible with latest TWRP, you can make sure by re-asking in the rom thread if you can directly install the rom right now or upgrade the firmware to 6.0 first.
2-(2) is connected to (1)
3- just use the latest TWRP you find for your phone in the official TWRP page, you don't have to use TWRP app, you can flash it with flashify, but it's OK if you want to use TWRP app, in fact, it's more safe to use it, and it has nothing to do with your android version because you will format the phone after all.
4-(4) is connected to (3)
5-(5) is connected to (1) and (2)
6-you choose ARM then 7.1 then pico or nano
and again, you must know that android version must be known in order to choose right, so if it's 7.0 then choose 7.0 gapps, and if it 7.1 or 7.1.1 the choose 7.1 gapps.
7- (7) is connected to (6)
8-yea. Wiping those 4 is completely enough, and don't worry about (factory reset) because it's a part of the full wipe, (factory reset) means wiping data, cache, and dalvik cache, which is already a part of the wiping process.
No problem, it's ok to ask, we all want things to go well
Click to expand...
Click to collapse
Okay. Some offtopic question if you don`t mind.
- Did you use any app to manage app start on boot? I mean when you boot the phone which app will auto start. I knew that AutoStart and ROM Tool box pro contains that option but I dont know how the process works.
- Which app you use to kill tasks? I use Greenify to hibernate apps when locked screen,plus recent task built-in to do the job. Any good suggestion?
- Do you use Titanium Backup to uninstall system app? I will but sometimes I am not sure what the app does but still think its useless to me and delete it. Such as WAP service. I mean in stock firmware,which still dont know although Googled. Do you know how can i know what the app does?
- What is the custom rom you recommend the most and what is the good point of it?
- I have installed Xposed framework in my current status, I mean stock rom, although I am goong to wipe anything but will it affect the process? Shall I clean uninstall it first?
I think thats it. Almost finish my questions. Thanks again.
Vulturon said:
Okay. Some offtopic question if you don`t mind.
- Did you use any app to manage app start on boot? I mean when you boot the phone which app will auto start. I knew that AutoStart and ROM Tool box pro contains that option but I dont know how the process works.
- Which app you use to kill tasks? I use Greenify to hibernate apps when locked screen,plus recent task built-in to do the job. Any good suggestion?
- Do you use Titanium Backup to uninstall system app? I will but sometimes I am not sure what the app does but still think its useless to me and delete it. Such as WAP service. I mean in stock firmware,which still dont know although Googled. Do you know how can i know what the app does?
- What is the custom rom you recommend the most and what is the good point of it?
- I have installed Xposed framework in my current status, I mean stock rom, although I am goong to wipe anything but will it affect the process? Shall I clean uninstall it first?
I think thats it. Almost finish my questions. Thanks again.
Click to expand...
Click to collapse
1- ES Task Manager, i used it to manage start up apps.
2- i also use greenify along with an app called "Advanced Task Killer Free", they make a good team for me ?
3- i don't use Titanium backup, uninstalling system app is an easy process and can be done using many apps, for me, i use Lucky Patcher to uninstall system apps, works good for me.
4-custom roms differ from phone to another, for my s2 i use AICP, i always liked it in marshmallow and in nogut, i also used RR but it has a huge battery drain, also many users like XOSP, it's a wonderful project, and it's very common, so overall i use AOSP roms, but when it comes to battery life, i use Neat Rom, it's stock based with many customizations and great kernel too.
5-no xposed won't affect the process, because you will wipe everything eventually.
----------------------:good:
MigoMujahid said:
1- ES Task Manager, i used it to manage start up apps.
2- i also use greenify along with an app called "Advanced Task Killer Free", they make a good team for me
3- i don't use Titanium backup, uninstalling system app is an easy process and can be done using many apps, for me, i use Lucky Patcher to uninstall system apps, works good for me.
4-custom roms differ from phone to another, for my s2 i use AICP, i always liked it in marshmallow and in nogut, i also used RR but it has a huge battery drain, also many users like XOSP, it's a wonderful project, and it's very common, so overall i use AOSP roms, but when it comes to battery life, i use Neat Rom, it's stock based with many customizations and great kernel too.
5-no xposed won't affect the process, because you will wipe everything eventually.
----------------------:good:
Click to expand...
Click to collapse
I will try the process later to see of this works... But...
1. customization & battery are the 2 factors I concern, i dont know how to see if the rom has good custmization and battery tweaks in their threads... https://forum.xda-developers.com/lg-g3/development Any tip or suggestion?
2. titanium backup has the option of "wipe data" of app when uninstall, which I think is cleaner for uninstalling, I mean no leftover of apps including system app. or you have better ideas about doing this?
3. Internal Storage is part of the full wipe, is it? I mean "system"/"data"/"cache"/"dalvik cache", because it contains many current status' files, I should wipe it. Correct?
4. Can I wipe external SD card in TWRP after installing the rom? Because I saw Android/Data or Android/obb files there, so I think some data files are in ext. SD card. For clean installation, I should wipe them too right?
Thanks.
Vulturon said:
I will try the process later to see of this works... But...
1. customization & battery are the 2 factors I concern, i dont know how to see if the rom has good custmization and battery tweaks in their threads... https://forum.xda-developers.com/lg-g3/development Any tip or suggestion?
2. titanium backup has the option of "wipe data" of app when uninstall, which I think is cleaner for uninstalling, I mean no leftover of apps including system app. or you have better ideas about doing this?
3. Internal Storage is part of the full wipe, is it? I mean "system"/"data"/"cache"/"dalvik cache", because it contains many current status' files, I should wipe it. Correct?
4. Can I wipe external SD card in TWRP after installing the rom? Because I saw Android/Data or Android/obb files there, so I think some data files are in ext. SD card. For clean installation, I should wipe them too right?
Thanks.
Click to expand...
Click to collapse
Well, the as a 8 don't have lg g3 then, it's a something i can't advice you about, but AICP is a great project that can balance between both; battery life and customizations and it has a good performance also.
Uninstalling apps isn't that big deal, when an app is removed all its data is removed except media files and some low size or even empty folders, so it's a something i don't usually think off neither should you, it's nothing.
Internal storage isn't a part of "full wipe", but wiping it is up to you, it's your choice.
You do too much thinking, you don't need to wipe neither internal nor external sdcard, i have a 16GB phone and i don't think that much about this
----------------------------------------------
Don't forget the magic word button

Categories

Resources