So, after owning my Transformer Prime for about a month now, I decided to take the plunge and root it. I followed the instructions for ViperMod and had it rooted in no time. I then followed the instructions of unlocking the bootloader and finally installing OTA Rootkeeper.
I've had rooted devices in the past (Droid Incredible) and am familiar with RomManager. So I installed RomManager on the Transformer Prime. I then attempted to create a backup of my "current Rom", which is just stock ICS. RomManager prompted me to update Clockworkmod Recovery, which I did (I now have 5.8.2.0 installed). It then rebooted...acting like it was backing up my current Rom, but when I got back into RM, and clicked "Manage Backups" and there was nothing there. I tried once more with the same result, and ultimately gave up on backing up my current config.
I then downloaded Cyanogenmod 9 (nightly). I selected Google Apps and it proceeded to download. I got an error that the Google Apps portion had an error, but it seemed to work when I attempted to download it again.
I then proceeded to attempt to install the new Rom. The menu came up, asking if I wanted to wipe data and cache, wipe dalvik and backup current rom. I selected all three and hit ok.
My tablet rebooted...quickly, and did not show any signs of installing Cyanogenmod. Sure enough, I got my stock ICS...no Cyanogenmod. I tried again...same thing. I tried a third time, and RomManager hung when I tried to select Ok after the options of backing up, etc. Ultimately I got the error popup, asking if i wanted to wait/report/ok. I hit ok.
I then...very stupidly in retrospect...performed a factory reset from within the phone's settings menu (something I've later read is a big no no). This time, when my phone rebooted, it went straight into Clockworkmod Recovery, which is where I am now. Stuck. I've read a ton and tried everything but had no success.
Strangely, I can find the cyanogenmod file by navigating through "install zip from sdcard", then "choose zip from sdcard", then "clockworkmod", then "download", then "get.cm", then "get" and finally "update-cm-9-20120301-NIGHTLY-tf201-signed.zip". And it allows me to update using this file...even giving me the message "Install from sdcard complete"...but nothing happens. I'm still stuck in Clockworkmod.
If anyone has any advice, I'm begging for your help. Really hoping I didn't ruin my brand new tablet...
Thanks.
only thing rom manager is gold for on the prime at the moment is getting the latest CWM version. other than that, trying to flash a rom, reboot into recovery, or backup doesn't work in rom manager for prime. everything needs to be done through CWM itself. whether flashing a rom or making a nandroid backup. so you have to manually go into CWM and try flashing from there. did you make sure the roms were stored on internal memory to flash(I believe it can only be done on prime this way at the moment)? try a different rom as the CM9 has alot of bugs n issues at the moment. try flashing virtuous rom or a stock modified rom from developement.
also check out developement section for a thread called the Di's n Donts of unlocking and thread called how to or not unbrick your prime. answers you seek are in there.
See my unbricking thread
http://forum.xda-developers.com/showthread.php?t=1514088
Thanks so much for your help guys!
to demandarin: Unfortunately the only ROM I downloaded before everything went haywire was the nightly cyanogenmod 9 from yesterday. And as I explained, that ROM doesn't seem to be flashing for me... I've tried downloading other ROMs onto my SD card, but I can't seem to get my Prime to recognize the SD card in CWM, and I can't figure out any way to get ROMs onto my prime...now that its stuck in recovery. Do you know if I can load ROMs onto my Prime at this point?
to Diamondback: I read your unbricking thread and its given me some hope. It sounds like I'm falling into the "1a" category. I'll have to bunker down tonight and see if I can work through those instructions (I have no familiarity with ADB at this point, which is my main concern). Anyway, I very much appreciate you pointing me in the right direction.
I am curious though, is there some place I can look for clarification on what works in RomManager and what does not? None of that was made clear in the app itself, so I just assumed it was fully functional, like it was on my Dinc. Now I'm paying the price...
Thanks again.
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
demandarin said:
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
Click to expand...
Click to collapse
Thanks, but I actually do have the latest version of CWM (5.8.2.0), according to the link you provided. The thing is, I'm just very unfamiliar with CWM, or really any recovery software. The link you posted notes the following improvements:
-Possibly fixes bricks (by properly restoring boot.img)
-Correctly comes with Staging/System unmounted
-Nandroid Restores properly the boot.img (of backups created with this CWM). This means no more issues when restoring a Rom if you are coming from another from (for example, if you are restoring Virtuous after wiping cm9)
Which all sounds great, but I have no idea how to really use any of that... Does "possibly fixes bricks" apply to my situation? I've tried selecting restore and advanced restore through CWM, but in both situations it says "cannot find files", which I'm assuming are the "boot.img" being referenced. So again, it seems like I'm hosed...
I'm just really hoping that Diamondback's unbricking method works for me. Though, I'm having a hell of a time finding instructions on how to setup ADB on my PC (Windows 7). Do you know where I can find good and current instructions?
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
demandarin said:
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
Click to expand...
Click to collapse
Thanks again! I think I need a tutorial on how to search XDA more effectively
SUCCESS!
Well, it took some jumping through hoops, but once I got ADB set up successfully, Diamondback's instructions worked like a charm!
For anyone encountering this thread with the same issues as me, I've included links to all of the sources of data I ultimately used.
Thanks so much for everyone's help!
Installing ADB
http://forum.xda-developers.com/showthread.php?t=1427008
http://www.youtube.com/watch?v=ZY4KSrgi-rE
I had to use the PDANet method, referenced in the Youtube video
http://junefabrics.com/android/download.php
Diamondback's Instructions for Unbricking the Prime
http://forum.xda-developers.com/showthread.php?t=1514088
Perhaps I spoke too soon...
My device is no longer bricked, but now I can't access CWM, can't factory reset...can't do anything. I'm stuck with a very broken build of Cyanogenmod 9
Here's the link to my new thread:
http://forum.xda-developers.com/showthread.php?p=23349041#post23349041
Related
Hey all. I just got a new G Tablet and am trying to install CM7 I was following the instructions to the letter from (Since I an't post links, just google this) Cyanogenmod G Tablet Wiki Full
I got through the 'Installing ClockworkMod Recovery' part and everything appeared to finish successfully.
After rebooting the device, I tried to boot into Recovery to install CM7 and the device just freezes on the ViewSonic splash screen. The screen says 'Recovery key detected Booting recovery kernel image', but it just sits there.
I am able to boot the device into the stock OS, but I can no longer get into recovery.
What can I do?
Tap UI Version: 1,2-4349
Kernel Version: 2,6,32,9-00001-g0e0c333-dirty
Build number: FRF91
Thank you in advanced for your help. Please let me know if there is any other information you need about my device.
Andrew
The key to your post is
Tap UI Version: 1,2-4349
Click to expand...
Click to collapse
You're on the 1.2 bootloader, and CWM .8 will not work on it. There is a versio nthat WILL work, but I, unfortunately don't know the exact link to provide for you. I'll attempt to look it up and get back to you, though.
basically, your G-Tablet, was at some point, updated with the most recent OTA update provided by viewsonic. The update was pulled 24 hours after it was released. You're not lost with 1.2...you have many options. You can either stay on 1.2 and flash any of the many 1.2 roms...some are listed in the development section, others can be found on "another" forum.
If you need CM7, then I suggest that you follow the "foolproof flash to stock 4349" thread, (http://forum.xda-developers.com/showthread.php?t=1039000) but STOP once you've successfully flashed STOCK 3588.
3588 is on the 1.1 bootloader required for CM7.
EDIT:
I also find it interesting, it appears that pershoot's kernel has been installed already? Was this a brand new out of the box G-Tablet, or a used one? I am actually hoping that it's used. If it's NEW, then VS needs to explain how it came with a redacted update AND a custom kernel...
THANK ROEBEET FOR THIS:
Since I can't link to another forum, I decided to copy and paste. If people are going ot come ot XDA with issues involving the now taboo 1.2 bootloader, then they'll need to admit that the only way to help them is to link to a forum that everyone is migrating to.
Download
clockworkmod v3.0.2.8 (1.2 branch / NIA rev5) Link: http://www.mediafire...2flqn8b10ebcq44
md5sum: ac4d728d74a6b608cce588d2649e79f3
(updated on 5/15/2011)
clockworkmod v3.0.2.8 (1.2 branch rev2) Link: http://www.mediafire...x61q8jlu2dx8i9u
md5sum: 48c0c40175ab38cebc1199f9d3be8a7d
(updated on 5/05/2011)
THIS REV2 VERSION HAS BEEN TESTED MORE, but nandroid restores are not working properly. Rev5 corrects that, but I need more testers to confirm stability, please!
Many thanks to bekit and rothnic, for their work with clockworkmod!! Their documentation is what assisted me to get this functioning.
NOTE ON CWM: Do not use the Android GUI tool to wipe user data, or else cwm will get stuck in a reboot loop! If this occurs, there are two ways to fix this:
1- ADB required
In clockworkmod, go to mounts and storage and mount /system. Then, run this on your local PC:
adb shell
cd /system/bin
./fixrecovery.sh
Then reboot. What should occur is that standard recovery should pop up and complete the data wipe. On the next reboot, you should be able to get back into the GUI.
2- nvflash required
Using the 4349 nvflash image, run this:
nvflash --bl bootloader.bin --download 9 part9.img
Then reboot. What should occur is that standard recovery should pop up and complete the data wipe. On the next reboot, you should be able to get back into the GUI.
Click to expand...
Click to collapse
TJEvans (is it ok if I call you TJ for short?) thank you very much for your help, I appreciate it very much. I'm sorry if confuse some terms here as I try to address your posts inline below, but I would definitely still consider myself a novice at this process of installing custom roms.
TJEvans said:
EDIT:
I also find it interesting, it appears that pershoot's kernel has been installed already? Was this a brand new out of the box G-Tablet, or a used one? I am actually hoping that it's used. If it's NEW, then VS needs to explain how it came with a redacted update AND a custom kernel...
Click to expand...
Click to collapse
This is a brand new G Tablet. I litteraly got in the mail today from Tiger Direct. I'm wondering if the Clockworkmod I tried to install is responsible for the custom kernel.
TJEvans said:
If you need CM7, then I suggest that you follow the "foolproof flash to stock 4349" thread, (http://forum.xda-developers.com/showthread.php?t=1039000) but STOP once you've successfully flashed STOCK 3588.
3588 is on the 1.1 bootloader required for CM7.
Click to expand...
Click to collapse
I don't necessarly need CM7, but that is what I have on my Nook Color, and I really like it.
The main question I have is that right now, I cannot get into clockwork or stock Recovery at all. I do have adb working, so I would think my next steps will require me to use adb.
At the moment since I can't get to recovery I seem to be stuck. Is there a process somewhere I can get recovery working again using adb?
OK...let's try something. It looks like you may actually be in stock recovery, but there's nothing for it to recover.
do you know of a way to get a file and a folder onto your internal SD?
if so, let's edit the instructions to be able to flash to 3588 stock...
What you need:
1. A stock 3588 image renamed to 'update.zip' (http://tapntap.http.internapcdn.net/...-3588-user.zip)
2. A folder called recovery with a file in it called COMMAND inside it with the following line of text:
Code:
--update_package=SDCARD:/update.zip
Click to expand...
Click to collapse
if yo ucan get those on the SD, then when you reboot, the stock recovery will run and install stock 3588 1.1 based rom and recovery, then you can install your CWM .8.
I have never used NVFlash or ADB, or APX...I have no experience with them. I'm just here helping people that have compatibility issues between 1.1 and 1.2 bootloaders.
After all, the key to fixing problems, is to first find out what the problem is...
I wish I could help more, but I've seen more and more people softbrick their g-tabs by using NVFlash than anything else. I'm not ready to go messing around with my own root files, yet.
If you can get that file, and that folder onto your SD, then stock recovery will automatically recognize it and run it...
I may have just really screwed things up. I ran 'adb reboot recovery' and I gets to the Splash screen with 'Booting recovery kernel image' and gets stuck. Now, I can't get into the device at all.
Also, none of the links in your posts seem to work for me.
try them from the original post, then:
http://forum.xda-developers.com/show....php?t=1039000
sorry, like I said, I'm not a techy...just a guy that doesn't like to see people suffer...
TJEvans said:
THANK ROEBEET FOR THIS:
Since I can't link to another forum, I decided to copy and paste. If people are going ot come ot XDA with issues involving the now taboo 1.2 bootloader, then they'll need to admit that the only way to help them is to link to a forum that everyone is migrating to.
Click to expand...
Click to collapse
It's far from being taboo since it's the honeycomb bootloader... their recovery was blue for a reason...
maybe they pulled those OTA update because they had not licensed honeycomb anyhow, 1.2 is perfectly good to install as long as you use a 1.2 compatible kernel you can even use non 1.2 rom!
Ok, I was able to get the device working again using NVFlash. (http forum,xda-developers,com/showthread,php?t=861950 replace commas with periods).
Now, I have the following:
Tap UI:1,1-3588
Kernel is still: 2,6,32,9-00001-g0e0c333-dirty
I don't know anything about this kernel, or how I got it, other than maybe it came with my first errant clockwork install.
Can you give me some pointers on how I should proceed? (I would still like to get to CM7 at some point, but I don't know if I should get a different kernel or go back to the stock kernel as well)
GREAT NEWS....glad you god it running so far.
OK, that may be the stock kernel...the numbers looked familiar to me, and I've never seen the stock kernel on that report...so, I may be mistaken.
in any case, you are now back on stock 3588 1.1 bootloader...
Now, you should be able to install the CWM .8 that you tried before, and flash CM7 from there...basically, follow the guide you followed before. but this time, it should work fine, since you are on the right bootloader.
Just remember, research ANY new roms you want to try to make sure what bootloader they are on.
to P00r:
as long as you use a 1.2 compatible kernel you can even use non 1.2 rom!
Click to expand...
Click to collapse
see, I didn't even know that...
The thing I'm seeing, is that Clemysn posted the BOS infromation here, and tried to emphasize that it's a 1.2 Rom...The 1.1 rom's though, do not indicate that they are 1.1 Roms. when 1.1 was all that existed, it made no difference, but now that there is another option, they should at least make sure to add "PLEASE BE SURE YOU ARE USING A 1.1 BASED BOOTLOADER BEFORE FLASHING THIS ROM!!!"
As you can see from Imarikinrat's post, he bought a supposedly factory G-Tablet with 4349 prepackaged on it...now, granted, you and I both know that it's more than likely a refurbished one, as I can't see Viewsonic intentionally releasing product with a bootloader and firmware that was pulled from their updater...
in any case. Roebeet kinda predicted that this would happen a bit. Since most moderators on XDA downplayed the impact of 1.2, it's gone fairly ignored. Think about Imaricanrat's post for a second. Had he not posted his system information there is no way that we would have known that it was a bootloader conflict. It would have been assumed that he was on 1.1 bootlaoder with a "brand new" g-tablet (seriously, man, I'd check that thing with a magnifying glass to make sure that there are no scratches or anything that would indicate that it was anythign other than BRAND NEW)
anyway...had he not posted that he was on 1.2, then who knows what advice he would have been given.
Well, now I'm back to my original problem. I cannot get into Recovery. When I start holding Power and Vol+, I see 'Recovery key detected Booting recovery kernel image' it then goes to the 'gtablet' splash screen then quickly into a screen with a box with an arrow and a progress bar (the progress bar has the candy cane animation and nothing happens for all of 3 seconds) then the device reboots.
I have tried putting the recovery folder and update.zip in the internal memory, and on an sd card to no avail. Any other suggestions?
that most certainly sounds like stock recovery to me...
I'm at a loss...it worked fine for me when I flashed to 4349 from stock 3588...just ran and installed, then I ended up on 4349 stock...
you're following the CM7 install guide? Or are you trying to install CWM at this point? I never installed CWM myself, as mine came with it on it.
I'm trying to install clockworkmod so that I can install CM7. Is that the right way to do it? I know there was a stock recovery gui that I cannot get into now.
as long as the recovery folder is on the SDcard, it will automatically attempt to run it...
picture it this way...remember back in the day of windows 3.1 In some cases, if you inserted a floppy disk with a boot file on it, it would check there first, then boot from internal memory...
So, the recovery folder is telling it to run the file in it, which unpacks and installs the update.zip.
once again, though, I never installed CWM myself, but from what you're saying, it should be working.
what happens if you remove the folder and file (after running it), and attempt to go into recovery again?
When I remove the file, folder, and SD card and try to get into recovery, I see 'Recovery key detected Booting recovery kernel image' it then goes to the 'gtablet' splash screen then quickly into a screen with a box with an arrow and a progress bar (the progress bar has the candy cane animation and nothing happens for all of 3 seconds) then the device reboots.
hmm...the box with the arrow and progress bar indicates that it's trying ot run something from recovery...weird..
ANYONE ELSE???
I'm not experienced enough to help...anyone else know enough about flashing CWM from stock, or flashing CM7, that can help out, please chime in.
thanks.
and sorry Imarican...I tried, but once again, no techie here.
No worries man, thanks for your help. Have a good night.
Update: Ok, I think somehow this whole process messed up the 'Recovery Partition' on my G Tablet for whatever reason. When I performed the NVFlash back to stock, it managed to 'fix' the majority of the device, allowing me to boot normally into Tap UI:1,1-3588. However that flash did not fix my Recovery Partition.
With all of that in mind, I found instructions on XDA to install 'clockworkmod via nvflash' (Since I still cannot post links, just google that and it should be the first link, also it's XDA thread 1058649).
After following those steps, I am now able to boot into Recovery which is now Clockwork Mod Recovery, and hopefully *crosses fingers* be able to flash CM7.
Given that I will probably never go back to stock anything on this device, does anyone know where I can download the 'Stock Recovery' for the G Tablet?
so is the point of this article Tiger direct sell used products as new?
so is the point of this article Tiger direct sell used products as new?
Click to expand...
Click to collapse
unconfirmed...what we know is that he had 1.2 4349 out of the box, stock firmware. There are a few possibilities. This could be a Tiger Direct return that was repackaged and sold as new. It could also be a direct from VS return that was repackaged as new, OR, VS actually sent a stock of G-Tablets to Tiger Direct that were packaged with the 4349 firmware on it.
Either way, people need to be careful when flashing roms and such. XDA has not, so far, made it clear which roms, kernels, and CWM versions are good on which bootloader. Some have been asking that devs start exiting posts to indicate which bootloader is needed for each mod, to attempt to avoid confusion.
We must also realize that new G-Tablets are being bought every day, and not every owner is knowledgable of the issues of the recent past, with VS, NVidea, 1.1, 1.2, etc. Most people probably, reasonably, assume that they can open it, root it, and start flashing whatever they want, not even aware that there is a difference.
Hey all,
I'm very new to Cyanogen, so sorry if this is a very n00b question.
The ROM Manager doesn't appear to work. It keeps telling me I'm not running ClockWorkMod recovery, and cannot connect to the web to download. I purchased the premium version thinking it would solve this (as well as to support the dev), but no luck. Is it just an issue with the nightlies not capable of handling ROM manager yet, or is it a setting of some sort that I'm neglecting? It's not a huge deal, but it looks like such a nice, simple way to stay up-to-date with the nightly builds as opposed to updating through CWM, wiping, etc.
I saw a post mentioning to go into developer tools and enable root access. The closest I found was in settings and I allowed apps and ADB root access, but this didn't help.
Any suggestions would be greatly appreciated, thanks!
I'm a bit confused, Why do you require ROM manager? The CWM that is built in with the ICS Kang releases should be doing everything that is required, then again, your reply would matter.
I think I am having the same issue. When I try to Flash ClockworkMod Touch in Rom Manager it keeps telling me I need to first install ClockworkMod Recovery even though I have Recovery 5.5.0.4 currently installed. It did the same thing when I had Recovery 4.0.0.4 installed.
I even tried to "Flash ClockworkMod Recovery" (First option in ROM Manager) and it does nothing.
Any ideas?
BEcause the same menu is in the CWM recovery lol
I'm following one of the threads that updates the kang build every 3 days, and as opposed to having to boot through CWM, wipe, install, then re-install apps and replace widgets, I thought I could update through ROM Manager instead.
It sounds like Sn0warmy and I are having similar issues.
From what I've heard the ROM Manager doesn't really work for the tab yet. If you want to update without replacing all your apps you can just flash the zip file in CWM without doing a wipe. If it causes problems then you could do a wipe & reflash afterwards.
Dolfan058 said:
I'm following one of the threads that updates the kang build every 3 days, and as opposed to having to boot through CWM, wipe, install, then re-install apps and replace widgets, I thought I could update through ROM Manager instead.
It sounds like Sn0warmy and I are having similar issues.
Click to expand...
Click to collapse
ROM manager works but it's wonky on the ICS kangs. It doesn't do anything that you can't already do in recovery, so there's no real advantage anyways. Oh, and don't use ROM manager to install a new recovery, and CWR touch doesn't work for the GT10.
^You saved me the trouble of insisting Why thank you good sir.
Thanks for the replies. I'll keep updating through CWM.
Coffeebeans, obviously I'm following your thread (thanks for the good work!) and I tried flashing over once but I got a ton of process media FCs so I figured wiping was the best way to go and have done so ever since. Probably should invest in titanium backup at this point so I don't have to reinstall from market everytime I wipe.
Thanks again for the help y'all.
It worked once with 4/17 build of CM9. After that, it has never worked again. It boots into recovery and pretends its flashing, but stops half a second later and restarts.
Something odd happened today when I tried to update. It rebooted and phone locked up and screen went black. I took out the battery and put it back in then held up and power to go into CWM. All of a sudden Rom Manager took over and flashed the rom as well as the additional zips successfully and rebooted. Everything works.
CWM tries to flash from /emmc. Rom Manager tries to flash from /sdcard and fails. It may be due to the swapped mount points on CM9. in CWM they are still swapped, even if you check the use internal storage box and everything shows up properly in CM9.
First of all, I want to thank everyone working on the CM7, CM9, CM10, SGT7, TWRP, CWM projects for the Nook Tablet. I've really been enjoying trying different ROMs on my Nook Tablet.
I started with CM7, and it ran pretty well. I also tried the CM9 (NX-Fire?) port, and I liked it as well.
I have been using the SGT7+CM10+Cherry Picks and it has been fine up to the 27/9 release. I cannot run anything higher than this on my NT.
I have tried CWM (up to 6.0.1.2) and TWRP (up to 2.2.2.0) to flash the newer ROMS, but the ROMS will not boot. The screen blanks, and after a time, it goes back to the boot screen.
I also can't seem to use the CWM 6.0.1.5 or TWRP 2.3.1.1 from the SGT7+CM10 thread.
I know I have the 16GB Nook Tablet. I have repartitioned the userspace, as mentioned in other threads. I can't help but feel like I'm missing a step somewhere.
Presently, my NT is running TWRP 2.2.20 and SGT7+CM10+Cherry Picks 27/9. Any one have any hints? A thread on the boards I have missed? Any help would be appreciated.
Again, thanks for all the hard work!!
Hi,
TWRP 2.2.2 has a flashing bug that causes updating recovery with current script to fail.
You must manually update to newer version and after that recovery update packages will function as descripted
Moved. Questions belong in the Q&A section.
Thanks
AvRS
demetris_I said:
Hi,
TWRP 2.2.2 has a flashing bug that causes updating recovery with current script to fail.
You must manually update to newer version and after that recovery update packages will function as descripted
Click to expand...
Click to collapse
Thanks! I'll try that this weekend. I knew I was missing something.
demetris_I said:
Hi,
TWRP 2.2.2 has a flashing bug that causes updating recovery with current script to fail.
You must manually update to newer version and after that recovery update packages will function as descripted
Click to expand...
Click to collapse
Sorry, but how does one manually update a recovery? I've tried flashing the newer TWRP from CWM as well (from an older version of CWM), and while the flash doesn't fail, it won't let me boot into TWRP, and the new CWM crashes before I can do anything. I've also tried flashing the recovery from fastboot, but I get a "bad boot magic" error when I try to boot.
Just flashed couple of days ago: pretty nice ROM
Besides annoying "SD card unmounting" problem I found that B&N Nook app does not work, it just keeps restarting, some error message shows up but goes away so quickly I can't read it. I wiped before I installed the ROM and reinstalling the app didn't help.
Please post a link to cwm 6 please, i need to install cm10 without it freezing and crashing
Sent from my Nook Tablet using xda app-developers app
jnorrisman said:
Please post a link to cwm 6 please, i need to install cm10 without it freezing and crashing
Sent from my Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
There is a search function on here...
Sent from my NOOK Tablet running CM10
jnorrisman said:
Please post a link to cwm 6 please, i need to install cm10 without it freezing and crashing
Sent from my Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
The OP in the developers section has links to both CWM and TWRP for your use. Remember, SEARCH is your FRIEND!
play store/goomanager closing
First let me say this rom is awesome! I had no idea my nook could run this smoothly. The only problem I seem to have is that on the newest build(10/25) both playstore and goo manager will open then close. I have tried clearing the app cache, re flashing rom and gapps, full wipes then reflash. I also tried reflashing the newest gapps without success. The 10/12 build works with both play store and goo manager. I am using the 10/12 build now so no worries if it can't be fixed. Again thanks for the time and effort on an awesome rom:good:
edit: I am using the latest twrp for my recovery (also awesome). the tablet is the 16gb version
Same problem as OP, latest SGT7 not loading
I am having the exact same problem as Byron and Spurious. I've really enjoyed this series of ROMs up until the last couple, which give the same symptoms as described in the OP - the ROMs will appear to load up to a certain point, then the device reboots. For me, the the device will load up to a seemingly random point -- sometimes it will reboot itself during the boot animation, and once it got all the way to the point where it starts updating the applications. But it never actually finishes booting up before it reboots itself.
In addition, the latest CWM and TWRP do not work for me. TWRP does not come up at all, and sometimes CWM will come up and I can move around the menus for a few seconds, then it hangs. It happens whether they were flashed via fastboot or SD, I've tried every combination. I can fastboot back to TWRP 2221 or CWM 6013 and they work fine.
I've been keeping my NT (16G) updated with the latest builds since early ICS and everything has worked as described up until now. I follow all instructions to the letter as regards to wiping, etc. so I don't think I'm doing anything wrong.
Is anybody else having the same issue with these latest ROMs? Byron, Spurious - did you get yours sorted? Could it be a hardware issue?
jarvz said:
I am having the exact same problem as Byron and Spurious. I've really enjoyed this series of ROMs up until the last couple, which give the same symptoms as described in the OP - the ROMs will appear to load up to a certain point, then the device reboots. For me, the the device will load up to a seemingly random point -- sometimes it will reboot itself during the boot animation, and once it got all the way to the point where it starts updating the applications. But it never actually finishes booting up before it reboots itself.
In addition, the latest CWM and TWRP do not work for me. TWRP does not come up at all, and sometimes CWM will come up and I can move around the menus for a few seconds, then it hangs. It happens whether they were flashed via fastboot or SD, I've tried every combination. I can fastboot back to TWRP 2221 or CWM 6013 and they work fine.
I've been keeping my NT (16G) updated with the latest builds since early ICS and everything has worked as described up until now. I follow all instructions to the letter as regards to wiping, etc. so I don't think I'm doing anything wrong.
Is anybody else having the same issue with these latest ROMs? Byron, Spurious - did you get yours sorted? Could it be a hardware issue?
Click to expand...
Click to collapse
Sort of. I figured out what I was doing wrong flashing the recovery from fastboot (you apparently have to extract the .img file from the zip) but was still having the exact same issues with CWM and TWRP as you. I've managed to get a newer version of CWM installed without it hanging by using the 5 touch enabled one from here. Using this I still have the same issues with the meghd00t rom going into a bootloop though.
I noticed OP said he has repartitioned his Nook, and I have as well. I wonder if this could be causing problems, have you done this as well, jarvz? Does anyone else have any input about if repartitioning could effect this?
spurious_access said:
Sort of. I figured out what I was doing wrong flashing the recovery from fastboot (you apparently have to extract the .img file from the zip) but was still having the exact same issues with CWM and TWRP as you. I've managed to get a newer version of CWM installed without it hanging by using the 5 touch enabled one from here. Using this I still have the same issues with the meghd00t rom going into a bootloop though.
I noticed OP said he has repartitioned his Nook, and I have as well. I wonder if this could be causing problems, have you done this as well, jarvz? Does anyone else have any input about if repartitioning could effect this?
Click to expand...
Click to collapse
Yes I have repartitioned mine as well, so that must be it. I was hesitant to go to the 5-touch because it was indicated in the thread that there was no way back after you do the firmware update, and so far there is only one rom that worked with the new firmware, so I didn't want to take a chance.
At least I'm pretty sure I'm not doing anything wrong, lol.
jarvz said:
I was hesitant to go to the 5-touch because it was indicated in the thread that there was no way back after you do the firmware update, and so far there is only one rom that worked with the new firmware, so I didn't want to take a chance.
At least I'm pretty sure I'm not doing anything wrong, lol.
Click to expand...
Click to collapse
Yeah, I don't have the new touch firmware installed either. CWM worked fine, though TWRP didn't seem to work properly (maybe it needs the new touch firmware?).
Do you know if there is any mention of re-partitioning causing an issue? I looked in the rom dev thread but didn't notice anything. I guess one of us who are seeing this issue could post there to see if anyone knows what could be causing this.
I finally got it to work. My PC is running Ubuntu, so YMMV.
Here is what I did:
1. Used "gparted" to create 2GB FAT32 partition that is bootable.
2. Used the instructions in the this thread thread to create a bootable SD disk that boots into CWM 6.0.1.2.
3. CWM 6.0.1.5 just doesn't seem to work on my Nook Tablet. So, I downloaded CWM 6.0.1.3 from here
4. I downloaded the latest ROM here
5. Downloaded the latest gapps: here
6. Copied the CWM, ROM, and gapps to the SD disk.
7. Inserted the SD and booted the Nook Tablet.
8. On first boot, it boots to CWM 6.0.1.2, so I flashed the CWM 6.0.1.3, and rebooted.
9. This time it boots to Cyanoboot, so I entered the boot menu and selected EMMC Recovery.
10. From CWM 6.0.1.3, I formatted /storage, and did a factory wipe. (I didn't format /storage the first time, and the wireless would not come up.)
11. Installed ROM from SD card.
12. Installed gapps from SD card.
13. Rebooted, this time letting cyanoboot boot from EMMC.
14. Profit!
I haven't tried 6.0.1.4 to see if that would work.
Hi all
ok so i'm a bit nervous writing this expecting all manner of attack in that i may be posting something that's been posted before lol, i've been working on this phone from start to finish about 9 hours, over two days..... i've googled just about every combination of words to do with the title and everything in between but nothing seems to come close to what i actually need to do as nothing works
i have an LG Optimus 2x / p990, it had ICS on it but was far too slow to handle this, it needs something a bit less hardware intensive to run smoothly, so i went ahead an found cyanogenmod stable ...... 7.2 i installed sdk after an hour of finding out how it works i finally got adb and fastboot working, i then needed this, that, this, that, etc etc etc.....
to cut a 9 hour story short, i've managed to get myself to the point where i wiped the phone of everything but CWM partioned for ics via the AIO software but CWM will not let me install any ROM onto the phone. to be more precise it says i have installed CM 7.2 successfully! (i've tried this via the CWM via external SD card and sideload) i reboot the phone it's as if i've never done a thing, no trace or suggestion i've even attempted it on the internal card... nothing
i'm at the point now where i'm quite happy to just have my phone back now and install ICS 404 but can't use the LG kdz install software as the pc doesn't see the phone as an LG p990 because it's recovery and i can only get it to come up as internal and external memory cards
i'm not really a noob when it comes to tech stuff but this little phone has me stumped.... please, i'm begging you, help me any operating system that can get my phone working will do, preferably the CM 7.2 if not back to ICS 404?
and i know, i know i should have backed up but i had no idea it could be so complicated just to put an OS on a tiny computer
ETA i've tried that exitrecovery.zip thing and it did nothing :/
It's quite simple
Try to reset and unroot/re-lock the phone then unlock and root, then what you need to do is get ROM Manager and get the Clockwork Recovery and the version that supports your device, although you might need to hook up your phone to your computer for the process to work.
Also put back in ICS 4.0.4 when unrooted and re-locked again like stock and make sure it's the stock file for your phone.
And after you got ROM Manger and the Clockwork Recovery
Then just in Clockwork wipe out all data on the device and don't do a factory reset in Android just with clockwork and delete everything that was made on that phone then install CyanogenMod.
After that it will seem to take a long time or just a while to boot up and then it boots faster then the original ROM.
If you have Clockwork Recovery just wipe out all the data while it's still in there and you should be set.
When it was my first time putting in CyanogenMod it was 10.1 RC1 on my Nexus 7 and it didn't work and forever bootlooped, and that was because i forgot to wipe the device. Then after going into Recovery with Clockwork I deleted all the data of my tablet and it worked but took 5 mins. to boot up which is nomal.
And if Clockwork doesn't work, do the same with TWRP (Team Win Recovery Project) and download that which can be found here teamw.in/project/twrp
If you don't want to get ROM Manager or that one isn't working then try this website to get Clockwork because it has the whole list of devices and I recommend downloading from the website instead of their app. clockworkmod.com/rommanager
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
twelfty said:
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
Click to expand...
Click to collapse
TWRP has a completely touch driven interface that is 100% themeable, while CWM has a touch version and non-touch version. Also TWRP has a built in file manger and terminal emulator where as CWM does not. A lot of people like TWRP because it provides a lot of good features with a simple and straightforward yet powerful user interface. I would recommend taking a look at this guide if you want more information on the differences between the two http://www.droidiser.com/2013/04/twrp-vs-clockworkmod-recovery.html?m=1.
Sent from my SCH-I535 using xda premium
ok i managed to do it i can't remember exactly how but some good links and info for anyone who stumbles across this in need of help
i went for cyanogenmod 10.1 to make this work i used this AIO tool - http://forum.xda-developers.com/showthread.php?t=2020737
repartioned with OLD partion layout and BL
installed TWRP (included in the aio)
if you need to reinstall the google play store make sure you have right version if you flash it and get "unfortunately setup wizard has stopped" repeatedly you have the wrong version see this link for which one you need http://wiki.cyanogenmod.org/w/Gapps
obviously make sure you have adb and fastboot setup and drivers too.... it's a long process installing the entire sdk, personally for flashing this once and most definately not inclined to do it again i'd go with just the adb and fastboot rather than the whole sdk
also i found a keyboard error with 10.1 where i'd type 1,2 or 3 characters and the keyboard would minmise not sure if there's a proper fix (i found one thing where you disable the autocorrect but didn't want to do that) so i decided to download and install hackers keyboad which is based on the gingerbread keyboad and is much better and comes with full features and integrates nicely
coupled with the info above from YoyoscratchMC and you should be in the field
good luck to all i was ready to jump out my window with my phone first so i could land as hard as possible on it last night but i got there in the end lol
So I'm very new to all of the rooting stuff. I got an HTC 4G LTE off Ebay just to use as sort of like a tablet. The firmware on the phone kinda sucks so I wanted to root it and go with a better version of Android that the bloatware-inflated version HTC provides. Not to mention updates are no longer supported.
I successfully rooted the phone with TWRP and followed the instructions to wipe the phone and such. This is where the instructions I found were kinda "off" and started using way too much lingo so I decided to wing-it a bit, thinking I had sort of understood it. I went to install, installed the BeanStalk and Gapps zip folders that are available in the the other section.
Rebooted my phone and it wouldn't go past the HTC boot logo... So I tried again. No luck.
I managed to get back in TWRP and I'm wondering what I need to do in order to get this bad boy to work. I checked the troubleshooting threads and found the section on boot-looping, but so I did the cache wipes it stated, selected "Factory Restore" and it rebooted back into TWRP. I'm not really sure what to do. Do I re-install the BeanStalk and Gapps zips, or am I missing something?
Thanks for any help.
If the phone is S-on you'll have to flash the kernel separately from the ROM itself. Hit the top link in my sig and read the entire guide. I think it will be quite useful to you:thumbup: