Suggestions for a car and a desk dock? - HTC EVO 3D

I need a desktop dock and a car dock for my Evo 3D. Any suggestions for a good and cheap dock?
Is there a dock that you can put the phone in and it will charge the phone and also have an audio output on the dock? I don't know if this is possible but if there is one I would like to get it. That way I could connect (and leave connected) some speakers (or the car's aux input) to an audio output on the dock. So I could just drop the phone into the dock and it would charge plus the audio would already be hooked up.
If this isn't possible then I guess just a good desktop and car dock suggestion for cheap (that charge the phone) and will fit with a kickstand case.

Dunno about cheap, look around on pricing, but Kidigi do both a car dock and a desk dock (No idea about the audio bit).

http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here

I use the Seidio dock at work and at home. It doesn't have an audio out that I know of, but it works great with my case (also made by Seidio - I'm not sure if you'll have success with a non-Seidio case). If you don't have a case it will work fine, also.
Not sure about a car dock but I know there are several options out there.

http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
Click to expand...
Click to collapse
How does this work ? Does it use the cigarette lighter as the support ?
Sent from my 3vo using XDA.

jamieunit said:
http://www.ebay.co.uk/itm/NEW-CAR-HOLDER-MOUNT-CHARGER-HTC-EVO-3D-/110729003340
I use this, perfect for me
THISIS50.com if its hot its here
Click to expand...
Click to collapse
Pretty cool, I might actually consider this for my car.
Thanks.
bagelicious said:
I use the Seidio dock at work and at home. It doesn't have an audio out that I know of, but it works great with my case (also made by Seidio - I'm not sure if you'll have success with a non-Seidio case). If you don't have a case it will work fine, also.
Not sure about a car dock but I know there are several options out there.
Click to expand...
Click to collapse
As for home, do you have a link for this Seidio dock? I too have a Seidio case and would like a dock that will work with it.

Hopefully this will work ok. Sending from my phone so it might be wonky:
Seidio Desktop Charging Cradle
Edit: Fixed broken link from my phone.
Sent from my Shooter using xda premium

Aersaud said:
How does this work ? Does it use the cigarette lighter as the support ?
Click to expand...
Click to collapse
Sorry bit delayed but yeah it uses the cig lighter for support pretty good, I've got a really stiff head phone jack plugged in so it pulls it a bit and made it a bit loose so rapped some tape round the joint, good for the price.
THISIS50.com if its hot its here

For me the best dock for Evo 3d Is:
http://www.am**on.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
there is also a Hdmi port!!!

Ins90 said:
For me the best dock for Evo 3d Is:
http://www.am**on.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
there is also a Hdmi port!!!
Click to expand...
Click to collapse
The link isn't working.
I figured it out, it's:
http://www.amazon.co.uk/KiDiGi-HDMI...3?s=electronics&ie=UTF8&qid=1327919543&sr=1-3
Thanks

Fitting Car Dock in Germany
Hey Guys,
as I am not allowed to post in the Developer Forum yet,
which slowly get's on my nerves (but I get the reasons for it),
I finally found something to post somewhere else that is not completely meaningless.
Does anybody know where to get one of those "good" car mounts in Germany???
I am looking for something like Kidigi Car Mount Cradle CM-HE3D, iGrip perfectFit Vehicle mount or the Seidio one.
I want something with USB pass-through so I just have to put the Evo in.
Even better if the Camera is not obscured.
The Kidigi one is my favorite. Unfortunately the official reseller cjdirect.de seems not to have it yet (i will call them next week).
Only other way for me would be form the US or HongKong which I wouldn't prefer for reasons like tax, delivery time and so on.
I found it on Amazon.fr for 25 Euro but they won't deliver to Germany.
Then I found it in another French shop where they want 41 Euro because of delivery.
The Seido Innotraveler is available on amazon.co.uk für 37 Euro but I don't like the looks so much.
The iGrip I coulnd't finde at all (in Europe).
So if anyone could help me out and suggest something I would really appreciate it. Else, I guess I will call cjdirect and maybe order one from Hong Kong or France.
Nearly forgot, of course i know about the official HTC car kit but I don't like that either, and for 40 Euro I would rather pay 1 Euro more for Kidigi one or go to Hong Kong. Same with the one from Brodit. Just too expensive.
Thanks

I use this one for my HD2 but with a different mounting part. I dont know whether both cameras are uncovered. http://www.ebay.de/itm/KFZ-Halter-H...alterungen&hash=item3f0facce90#ht_2721wt_1113

Dnst said:
I use this one for my HD2 but with a different mounting part. I dont know whether both cameras are uncovered. ...
Click to expand...
Click to collapse
Thank you. Looks good but is not quite what i was hoping for.
I don't want to handle any cables when I want to load my phone in the car.
As I could'nt find anything else either I guess I just order the Kidigi mount through ebay from Hong Kong.

Ok, as I am really interested in a good car kit, too, maybe you could share your experience here when you have received the product. I am currently preferring this one http://www.pdamax.de/Zubehoer/HTC/EVO-3D/Kfz-Kit-CU-S520-Halterung-Ladekabel,hz-620:338.html or I will just buy a new cradle and put it on my existing model but it seems the major problem with most of the kits is the cameras not having free sight.

This is the official dock by HTC and due to the camera being obscured and
the high price I decided against it.
I will report about the KiDiGi dock as soon as I receive it.
It is on it's way already but tracking with DHL doesn't work yet (if at all).

have you look at the iGrip car dock?

Yes, thes iGrip dock would have been my second choice.
It has the best reviews of all but as it didn't matter
to me if I order from HongKong or the US I chose Kidigi
for it's looks and it's price.
I also found some reviews about the Kidigi docks for the Desire (I guess), here in the xda forum.
Were quite good too.
For all who are interested, you maybe want to checkout amazon.co.uk
for the Seidio Evo 3D Innotraveler Car Dock (not allowed to post links yet)
High Price but would have been my third choice, still better than HTC one because Camera should be free.
You need credit card though, same as in France for Kidigi.
Choose wisely

Anyone used both the iGrip and HTC car dock? I'd like to know which seems more solid. The obscured cameras don't really matter to me on the HTC one because there's a 99.99% chance I won't be snapping pics while driving.
As far as desk docks, I found this. OEM FTW.
http://www.amazon.com/dp/B005CK2APQ/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Sent from my PG86100 using XDA

You can find articles comparing HTC and igrip docks. HTC seems more solid, less vibrations, according to them.am on my phone, you can find them through Google.
and the camera is not only for taking pictures, which shouldn't be done too frequently , but for example for navigon reality scanner.

how much vibration come purely down to what mounting solution you use, if you choose a low vibration mount or vehicle specific mount any dock can be rock solid, I have the iGrip but I do not use the included suction mount as I hate having it on the windshield, I use a dash friction pad with a different suction mount that allow me to have it sit in between the instructment panel and the GPS LCD on my RDX, if I use it in my Mazda6 I have a Proclip vehicle specific mount (VSM) and that's super rock solid. I don't know about the HTC, but the iGrip Dock use the Herbert Richter (HR) 4 prong mount system so can use any mount that support the HR system or get a adopter plate, that's what I use in my Mazda with the Proclip, screw the plate onto the VSM and off i go, and if my wife want to use a dock on for her iphone its easy to swap also.

Related

For those looking to mount their GPS enabled Mogul to their windshield....

I discovered a company called Krusell, which is a fine leather manufacturer out of Sweden. They have a line of accessories called Multidapt, which essentially allows you to use the leather case on your phone and mount it to a number of different things, including belt, backpack strap, and, best of all, car windshield (or car dashboard). I was trying to figure out what would be best for mounting options in my car, but I didn't want something permanent, as my car is only a temp. The accessory to mount to your windshield is called the Krusell Windshield Holder, and is about $15 shipped. You need to also purchase the Mogul leather case or the Multidapt accessory to hook the two of them up.
I'll take some pics if you guys wanna see!
Pics would be great thanks! anyway to hide the charging cable with this setup?
Yes, please post pics
Here's a link. http://www.sfplanet.com/product/50132/Krusell_Windshield_Holder__Mount_50132.html
Good price at $11.95 also.
I use a PDAir aluminium case ($28) and its associated car mount ($12):
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000144&products_id=6144
With two separate orders made around the holidays it took ~2.5 weeks for the items to arrive to BC.
Back to a Palm V in a Rhinoskin, I've always kept my PDAs in metal cases.
Can you post up some pics of your mogul in its leather case attached the windshield mount
I just use a generic car mount and it works fine... the only thing that worries me is that the back of the phone gets kind of hot... something with some ventilation would be awesome.
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=881
i saw this in another post, i do not have it nor have used it but it looks nice? someone buy me one and i'll test it for you
coffey_joshua said:
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=881
i saw this in another post, i do not have it nor have used it but it looks nice? someone buy me one and i'll test it for you
Click to expand...
Click to collapse
I was totally thinking of buying this mount! Does anyone have it? I am wondering if it has a permanent mounting option. I have a Pro.Fit mounting bracket in my car and would love for it to be able to attach to that!
Doesn't seem like this really belongs in the upgrade forum.
I have this mount and love it. The landscape swiveling is awesome to use your keyboard for keyboard shortcuts(never for txting or emailing while driving obviously, grin). Sound quality is great from the audio out into my aux in on my car. I use it for mp3's, gps etc and it works great. I posted some pics of my install in another thread here: http://forum.xda-developers.com/showthread.php?t=367137
Have you guy use this one ? http://cgi.ebay.com/NEW-Car-Mount-H...ryZ35158QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
AstronusX said:
Have you guy use this one ? http://cgi.ebay.com/NEW-Car-Mount-H...ryZ35158QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
that is the craziest modded mogul i have ever seen! how the heck did he, er, wait..... never mind
AstronusX said:
Have you guy use this one ? http://cgi.ebay.com/NEW-Car-Mount-H...ryZ35158QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
That's pretty much identical to what I use.
It works fine, but it's got 2 downsides....
1. The back of the phone gets hot in it.. I'm sure that's not a really good thing.
2. The back of the mount blocks the speaker, so voice directions are muffled. If your car stereo has an auxilary input, problem solved... my car doesn't.

ideal car holder/fitting method for touch hd?

I love using my hd to watch movies hooked up to aux input in my car,
I got one of these of ebay:
http://cgi.ebay.co.uk/NEW-CAR-CHARG....c0.m14&_trkparms=65:1|66:2|39:1|293:1|294:50
its already snapped!
I want something that allows you switch between horizontal/vertical and tilt funtion for tomtom and core player
I may try velcro stickers or maybe an air vent holder
any other ideas?
I have had 2 of these..they are absolutely rubbish, the insertion clip snapped both times. I have also tried another holder (universal one) and that turned out to rubbish too, I threw it away. Another time the suction disc came away from the arm. I have also tried my own custom made holder - I took a leather phone case and screwed it into the back of the arm attachment, that worked much better than the worthless gadgets of ebay. So save your money and forget buying from ebay, it maybe worth spending a bit more for a better quality item. And just yesterday I found my my xda orbit holder provided by O2 so using that for now which fits the Touch HD very well.
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
I had a universal jobby off ebay, that was a bit rubbish since where it clamped onto the phone it obscured the volume control buttons.
Ordered one of the HD specific designed ones and will see how that goes.
KaNiMziE said:
My side I buy that for my car Car Windshield Swivel Mount Dock for HTC Touch HD. At 5.60$ nobody can make better!
Work like a charm!
KaNiMziE
Click to expand...
Click to collapse
I've had two of these and on each occasion the clip broke, it's useless!
If anyone is still searching
I've got a magnetarm for my HD combined with a metalpad. Works fine and you can rotate your pda in any order.
http://www.amazon.de/MAGNET-HALTERUNG-T-Mobile-Compact-Autohalterung/dp/B000RXZUPA
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
laguna33p said:
I've had two of these and on each occasion the clip broke, it's useless!
Click to expand...
Click to collapse
I have it for 3 weeks now and no trouble at all, very fast delivery and safe, only 2 weeks at my door....
KaNiMziE
http://forum.xda-developers.com/showthread.php?t=533649
Brodit holder + charger
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Pro Clip makes some amazing solutions. I have used them for years on numerous devices.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Goes pretty fast. Haven't done any comparison, but I can't complain. I normally drive 45 minutes to work and twice a day charging is fine for me.
Balthazar81 said:
I have recently installed a holder and charger for my Touch HD and can highly recommend it!!
http://www.brodit.com/
The installation was somewhat easy, had to open the dashboard to connect it to power behind the stereo.
Click to expand...
Click to collapse
got one as well it pricey but well worth it
mrobo said:
I will mounting this one Car Portable Device/Gadget Holder and Windshield Mount
and after then when I use it, I tell you
Click to expand...
Click to collapse
I like the look of the solid mount to the screen, but the holder looks a bit busy.
How have you found it?
Paul.
I got my own here www.mobilefun.co.uk
In this page you can find just about everything you need for your touch hd or any other phone... Bad thing deliveries are done only within the EU countries
The link for the holder i personally purchased and i'm 100% satisfied is here:
http://www.mobilefun.co.uk/htc-touch-hd-car-holder-p19992.htm
If you are looking for something a lot cheaper that goes with a car charger in the pack you can look here:
http://www.mobilefun.co.uk/drivesafe-car-pack-for-the-htc-touch-hd-p20932.htm (only difference with the first one is a little more stiff on adjusting method) but its still perfect and safe & both are really easy to adjust horizontally and vertically the phone & they are both built for windshields which means you can video type your driving
I suggest it without second thoughts!
DontHate said:
that looks really good
does the charger fast it at the fast htc charger rate, or at the slow usb plug rate?
Click to expand...
Click to collapse
Got the same one. Pricey but oh so worth it. I love it,and would def recommend it. I've tried the suction ones, and they for some reason keep falling off the windscreen, even with cleaning the surface/drying it etc.
The brodit just clips into your dash, and fit your touch hd perfect. They make mounts for every car.
I love it!!!
And it charges at a normal rate, just like a standard wall charger.
I have this one and it's excellent..
Brodit holder question
I have a cheap universal effort I bought from some motorway services - Im looking for a better solution - im using airvent attachment - its a three pronged affair which clips over one of the vent "stays". Its wobbly as hell - which is fine most of the time, except when you are attaching the charging cable. Does the Brodit attach to the airvents ? if so does it attach solidly ? in a better way than my three pronged clip ??
Depending on your car and which mount you want.
For my Xantia, using the vent beside the steering wheel the mounting plate fits in around the vent, between the vent unit and the dashboard body, rather than the cheapo ones that clip feebly to the vent.
At the moment I'm using two of the suction cup ones that people have had problems with.
Superglue is your friend (no, do not superglue it to the windscreen no matter how temping that sounds!).
The internal flange which holds the silicon cup to the base of the arm breaks up causing it to regularly fall off teh windscreen, some good superglue carefully dripped in fixes this. The other problem I've had is the ends breaking where the metal snake fits in, again superglue (pull back the concertina cover) in each end sorts this.
Ok these are things that should not go wong in a good product, but when they're available for a couple of quid shipped from China, it's to be expected, and thankfully easily rectified.
Has anyone got the details of a UK supplier of Brodit?

Tilt 2 Car Mount

I know theres a thread on the Touch pro 2 Car mount but i dont know if any of those mounts work for the Tilt 2. I'm looking for something that fits nice and clips to the vent sturdy and also can rotate to landscape. I searched and searched and googled and cant find anything remotely good.
I bought a universal one but it was garbage
I know Proclip / brodit makes great car mounts but i cant justify paying 70 bucks for a car mount. ( 35 for the mount and 30 for the car mount part )
Sorry for making a new thread for this but i see a ton for the Touch pro 2 and still dont know if those will work with the tilt 2. Thanks for the help in advance
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4013wt_939
Anyone know if this will work with the Tilt 2?
dash mount
Best one I've found.... I hate Best Buy but they were the only ones in town with a decent mount. It was 24.99, a little more than I wanted to spend, but well worth it.
http://www.bestbuy.com/site/Xentris...lack/9072399.p?skuId=9072399&id=1218022585746
Nate
They should make a Better one
with charging dock like other Phones have
ilordvader said:
They should make a Better one
with charging dock like other Phones have
Click to expand...
Click to collapse
These days it seems like you're pulling teeth in terms of getting accessory developers to develop accessories for any non-iPod/iPhone devices...
This is the Bets one I found till now - HERE
most adjustable
I just ordered this one for a Tilt2. For $13 delivered it doesn't look to bad. I don't believe the TP2 exact fit ones will work with a Tilt2. I would be nice if one came out soon.
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
anit77 said:
I've looked at the ProClip. It looks pretty good. The problem is I just can't see spending close to $80 for one. I upgrade phones every 12-16 months Hell, I only spent $99 delivered for my Tilt2...
Click to expand...
Click to collapse
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
marcini said:
how did you do that?
anyway, did anybody try this:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
Click to expand...
Click to collapse
I did it here.
Again I'm weary of TP2 exact fit holders. That one is labeled for T7373, the Tilt2 is T7377. There is a small size difference. It does look decent though.
I drive a GMC Sierra and have been looking for a dash or vent mount. A windshield mount puts the phone out of arms reach.
krystos said:
Looks like my usual vendor, ProClip USA is developing one, but it is not ready yet. Check them out at:
http://www.proclipusa.com/
Click to expand...
Click to collapse
Actually this one is available. I've already got one in my truck for my Tilt 2.
be VERY careful with vent mounts. Your AC can make your phone cold causing it to condensate when you exit the vehicle and walk around outside ESP in high humidity areas thus voiding your warranty
proclip
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
moonwulf said:
i bought the proclip car kit for the tilt. now i have the tilt2.
the car mount fits great, good location. i agree it is expensive, but replacing the phone holder for the tilt2 is half the cost. still great fit and location.
Click to expand...
Click to collapse
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
DarienA said:
Does the holder you're referencing allow you to rotate the tilt 2 from portrait to landscape?
Click to expand...
Click to collapse
I have the same holder, and yes it does. It also allows you to open the keyboard.
igrip
i have the igrip custom mount for my fuze, i like it a lot, and the mount detaches from the goose neck. they make several mount options that can connect to the custom clip. the have one for my mountain bike, so i can attach it on the trails and use some of the gps features with a program i downloaded here on xda. They also have some more solid mounts that dont move around as much as the goose neck. I am getting a tilt 2 real soon, as soon as my contract is up for upgrade... (next week).. would love to find a custom clip for it that works with the igrip mounting options, has anyone seen one. i dont see a custom clip for the tilt 2 on their website.
igrip
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
kmartin888 said:
http://cgi.ebay.com/Car-Charger-Mou...wItemQQptZPDA_Accessories?hash=item518daef061
actually, just saw this one it looks like the same bracket as the igrip. that I have.
this is the one i have for my fuze
http://www.fuzedepot.com/igrip-custom-flexible-mount/3A78A5370.htm
Click to expand...
Click to collapse
Yeah i had a iGrip for the Fuze as well and i loved it. I am wondering if they say TP2 if they work with the Tilt 2. Im not sure if the specs are exactly the same or i would be buying this one here for sure
Take a look. Anyone know if this works with the tilt 2? I think i posted this earlier too and no one answered
http://cgi.ebay.com/ws/eBayISAPI.dl...964413&ssPageName=STRK:MEWAX:IT#ht_4110wt_939
The one
I think that this one will do it for ya
http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspxhttp://images.google.com/imgres?img...M+Custom&hl=en&safe=off&sa=G&um=1&newwindow=1

Official HTC Cradle

Anyone else got the official HTC Hero Cradle?
Mine just arrived and whilst it looks good there are a few faults..
It collects fingerprints like mad, and the bigger problem.. because of the chin on the hero it stands too straight upright.. it needs to be laid back a little more to make it easier to read if its in front of you on a desk.
It wouldn't be a problem on any phone thats straight (the cradle is universal and can have little adapters fitted for a few different HTC models).. but because of the curve of the chin the usb socket points at a weird angle.
I've got the cradle. It does collect fingerprints like mad, but the angle doesn't bother me at all.
the angle doesnt bother me. trying to get it out of the cradle bothers me. seems so difficult to pull out or even put in for that matter. will this ease up the more i use it?
SimplySquare said:
the angle doesnt bother me. trying to get it out of the cradle bothers me. seems so difficult to pull out or even put in for that matter. will this ease up the more i use it?
Click to expand...
Click to collapse
Yes it will.
must say I'm pretty dissapointed with accessories for Hero. Official cradle seems to expensive, and to find cheaper one that has audio output on it? asking too much.
http://cgi.ebay.com/USB-AC-Dual-Bat...wItemQQptZPDA_Accessories?hash=item414c23acfb
looks like this can be it. but, can any cradle be used if the phone is in "soft silicon gel case cover" ?
Dac0908 said:
must say I'm pretty dissapointed with accessories for Hero. Official cradle seems to expensive, and to find cheaper one that has audio output on it? asking too much.
http://cgi.ebay.com/USB-AC-Dual-Bat...wItemQQptZPDA_Accessories?hash=item414c23acfb
looks like this can be it. but, can any cradle be used if the phone is in "soft silicon gel case cover" ?
Click to expand...
Click to collapse
I bought that cradle and it's a piece of sh*t!
It's huge and doesn't even charge the phone sometimes. Stay away!
bunt83 said:
I bought that cradle and it's a piece of sh*t!
It's huge and doesn't even charge the phone sometimes. Stay away!
Click to expand...
Click to collapse
I had one of these for another HTC phone (I can't even remember which now) and you need to have DC5V and USB both connected to reliably charge. And come on it's not that big
As for the official cradle, yes it is pretty expensive but it is very well made and don't forget it is universal - so you can just replace the adapter when you change to another HTC phone, ala iPod docks. Don't think it fits the Nexus One though? Or maybe just not yet.
ok thanx
I thought that it would be an easy thing to find. and cheap. but it's not really, looking at iSomething accessories, well... it's very hard to compare. There is iEverythingYouCanThinkOf, but only one or two models of HTC compatible docks with audio output. that's sad.
As long as the dock has a proper HTC ExtUSB connector on it and not just mini-usb you can get audio out easily from any of them.
Grab an Ext USB 3-in-1 Splitter from ebay (They look like this: http://forum.xda-developers.com/attachment.php?attachmentid=57219&d=1194430021)
And plug into the dock.. thats what I did when I was using my kaiser dock before I bought the official one.
yes that was my plan
but noone said anything about docking a Hero with silicon gel protection on it? it's only about 2mm thick but will it fit? hmm...
Dac0908 said:
yes that was my plan
but noone said anything about docking a Hero with silicon gel protection on it? it's only about 2mm thick but will it fit? hmm...
Click to expand...
Click to collapse
hello, anyone?
Dac0908 said:
must say I'm pretty dissapointed with accessories for Hero. Official cradle seems to expensive, and to find cheaper one that has audio output on it? asking too much.
http://cgi.ebay.com/USB-AC-Dual-Bat...wItemQQptZPDA_Accessories?hash=item414c23acfb
looks like this can be it. but, can any cradle be used if the phone is in "soft silicon gel case cover" ?
Click to expand...
Click to collapse
I think that it does support audio out. See this: http://www.mtpdata.dk/htc/htc-hero/cradle-dockingstation-til-htc-hero-med-pladsslot.html the website is danish but look at the pictures.
Looks nice, I sure wish Sprint would have left the CDMA Hero alone.
i'm using this one
http://www.mugen-power-batteries.co...radle-with-2nd-battery-slot-for-htc-hero.html
good cradle !!
Lucaryholt said:
I think that it does support audio out. See this: http://www.mtpdata.dk/htc/htc-hero/cradle-dockingstation-til-htc-hero-med-pladsslot.html the website is danish but look at the pictures.
Click to expand...
Click to collapse
Yeah it has audio out + room for an extra battery
From the site :
- Docking Station / Cradle for HTC Hero
(with USB cable + power cable)
NoteThis dock only fits HTC HERO , and not to other HTC smartphones / phones!
Docking Station / Cradle for synchronization of data (between phone and PC) and to charge your HTC HERO and / or extra battery.
Besides that, this dock also separate Audio-Out port!
Click to expand...
Click to collapse
Lucaryholt said:
I think that it does support audio out. See this: http://www.mtpdata.dk/htc/htc-hero/cradle-dockingstation-til-htc-hero-med-pladsslot.html the website is danish but look at the pictures.
Click to expand...
Click to collapse
hey man! thanks a bunch. my thing is, i dont know s**t of danish exept for dryer and kierkegaard.
does that website sell to portugal? that dock is awesome.
kudos
http://cgi.ebay.co.uk/AIO-DELUXE-BA...ories_MobilePhoneChargers&hash=item2557d93076
A bit expensive for me though... xd
RCOO said:
http://cgi.ebay.co.uk/AIO-DELUXE-BA...ories_MobilePhoneChargers&hash=item2557d93076
A bit expensive for me though... xd
Click to expand...
Click to collapse
dang, man! shure is deluxe. even prettier than official cradle. and also a bit expensive for us in this corner of europe... )=
hello everybody

Best Car Adapter?

Which Car Adapter do you recommend guys for the Hero?
Ive seen these:
http://cgi.ebay.co.uk/WINDSCREEN-MO...ries_MobilePhoneBatteries?hash=item23038de0be
This looks a bit cheap
What about this one, looks half decent:
http://cgi.ebay.co.uk/AIO-PREMIUM-C...ries_MobilePhoneBatteries?hash=item23049b1982
Any other suggestions peeps?
I use a Brodit active mount. Looks good but is not cheap (about £30 ish in UK). But then I just slide the phone in and charging starts as soon as i switch on the ignition. I have used Brodits for my last 3 phones and all have worked well.
Cool you got a link for it, found it about £34.99 anywhere recommended?
Thanks dude
Got mine from prepaymania - it was £27.04 including delivery. Now it is £28.22.
They were fine, but got let down by the lying toads in the Royal Mail who insisted they had tried to deliver but I was out. The note saying that got delivered the next day by the postman! So had to collect it from my Royal Mail depot. But NOT Prepaymania's fault.
BTW I have mine hard wired in via a ciggy lighter behind the dash. Don't try wiring it in direct or you will fry your Hero because the ciggy lighter adaptor houses a voltage reducer. No wires show and I mount it using a car specific Brodit car mount as well.
Cheers dude. I don't want tyo drill in to the dahs, do they have a sticky thing that has to go on the dash as well? Or is there another way of doing it.
appreciate the link
Look at Brodit's site here. Click on "choose the mount for your vehicle" and put in the details. They do fittings for almost every car going and none of them involve any drilling.
You then need to find somebody who stocks them. Normally easy (prepaymania may) for more common cars. May have to wait a bit longer for unusual ones
Make sure you order one for RHD cars if in the UK!
I order the one on ebay but It broken after couple of twists. After a good glue it works perfectly!
I do not know if it affects th G2 battery life a lot but i use one of my blackberry phone chargers i think it's the one for the bold 9000
so far i didn't notice much change in battery life plus it chargers more than 70~90% of battery life in about 30-50 minutes.
just to add to my previous post. I have a silicon case on my Hero and that won't fit on standard car holder. My trick is to light it up so it warm up and expand it a bit and it fit perfectly!!
Ive bought one off ebay now, a herbert reicher one! I think thats what it is called!
Will see how i get on with it!
Funkyfin2000 said:
What about this one, looks half decent:
****link***
Any other suggestions peeps?
Click to expand...
Click to collapse
Avoid londonmagicstore on eBay.
I bought one of these holders and they sent me one that was meant to be a for a Nokia N97 and then insisted it would fit the Hero too despite the size difference. My N96 I had at the time fit so an N97 or Hero would just fall straight out lol. Sent back and got a refund luckily.
If anyone could recommend a car holder that would be suitable for running the Hero in landscape mode I would be grateful, the Brodit and Herbert Richter ones don't look to be secure enough.
I'm looking at one on Mobilefun that seems to be the correct version of the one from Funkyfin's eBay link.
A few days ago I bought an HTC car kit. Unfortunately as a new user here, I'm not yet allowed to post external links but the name of the kit is "CU-S210". Just google it and you should get a lot of results.
It says HTC on the box but if you look closely, it seems HTC buys from Herbert Richter (the flexible mount is labeled "HR" and on the cradle, there's a "made in germany" and I assume, it is HR as well since it looks exactly like the HR ones).
My opinion: I haven't gotten round to testing it on long trips but so far it works quite well. The phone is easy to get in and out but it still feels safely in place, even in landscape mode.
Well, if you drive a landrover through the rocky wilderness on a daily basis, I assume it wouldn't hold forever (however, then you probably wouldn't use a phone for navigation anyway ^^ ) but for regular street use I see no problems with landscape mode.
My brodit holder for the Hero works fine in landscape mode - in fact that is how I use it most of the time with my sat nav app. It has a ball mount so swivels easily and holds the Hero very securely

Categories

Resources