Team Darkforest: Kernel
Maintained by Atarii and Keiran of Team Darkforest, forked from FreeXperia kernel sources
Download v4: http://icxperia.com/keiran/cm9/DarkForest4.img
Download v5: http://icxperia.com/keiran/Darkforest5.img
Features of v5:
Recovery keys remapped
Two way call recording (FreeXperia)
Features of v4:
Added 1.6GHz Overclock
Features of v3:
Forked newest FXP kernel.
Disconnected ALS in kernel - read below.
Enabled some governors that were not already enabled.
SEMC kernel update
About the ALS being disconnected, here I explain:
In v2 of the kernel, I had produced a script inside the kernel and an app that ran the script, and basically what this did was check if `cat /sys/devices/i2c-0/0-0040/leds/lcd-backlight/als/enable` was equal to 1, if it was, it changed it back to zero. The problem with this is that it used CPU cycles and impacted on battery, as well as caused flickering.
In v3 onwards, I have done this: https://github.com/keiranFTW/semc-k...mmit/6f252f86b862c9483bc900a8c1bef73f88f8192c
Atarii mentioned for me to do it, and so I did, and what it does is tell the kernel that the ambient light sensor is not attached, and therefore it cannot dictate the screen brightness, so you could say it is physically turned off.
Sources are at github: https://github.com/keiranFTW/semc-kernel-msm7x30-ics-1
and FXP source: https://github.com/freexperia/semc-kernel-msm7x30-ics/tree/ics-beta
damn you are quick.
i just wanted to make a thread for my new cm9 kernel
did i miss something?
is ICS out?
or are the beta kernel sources out?
DooMLoRD said:
did i miss something?
is ICS out?
or are the beta kernel sources out?
Click to expand...
Click to collapse
What do you mean?
This is based on the CM9 FXP kernel. Data now works on CM9
Keiran
Is the battery life better on this kernel or on the stock CM9 kernel included in the data fix
wow its awesome. i will try !
RiThBo said:
Is the battery life better on this kernel or on the stock CM9 kernel included in the data fix
Click to expand...
Click to collapse
well, depends what settings you use. You could say some of the CPU governors I enabled may better battery life
KeiranFTW said:
well, depends what settings you use. You could say some of the CPU governors I enabled may better battery life
Click to expand...
Click to collapse
Just flashing now. I am using yours...
UPDATE: It booted... YAY. Thanks
Does this have cwm built in?
Michealtbh said:
Does this have cwm built in?
Click to expand...
Click to collapse
Yes
//10char
Booted, Thanks Keiran
I love the dedication that you bring to the XPlays Table!
-.- For me it boots... but the phone doesn't detect my SIM -.-...
it booted succesfuly, thanks.... but does data work with this???? Because after enable data conection, it doesnt connect to 2G/3G... only works with wifi
KeiranFTW said:
Darkforest Kernel CyanogenMod 9 - Custom Kernel based on FreeXperia sources
Enabled CPU governors:
powersave
performance
conservative
minmax
interactivex
savagedzen
smartassv2
Enabled IO schedulers:
AS
Deadline
CFQ
VR
v1: http://icxperia.com/keiran/cm9/boot.img
Click to expand...
Click to collapse
is this not insecure kernel? its says adb remount operation not permitted and according to google you need ro.secure to be off or something lol. i have no idea if this is relevant for xperia play though.
EDIT:
doomlord kernel is insecure so i guessing the above is relevant to play aswell.
[v01 onwards] insecure kernel
kernel is insecure (ro.secure=0)
Click to expand...
Click to collapse
KeiranFTW said:
What do you mean?
This is based on the CM9 FXP kernel. Data now works on CM9
Keiran
Click to expand...
Click to collapse
ah just what i thought...
continue kanging
flash the data fix from 1 of the last few pages of the cm9 post.
fma965 said:
flash the data fix from 1 of the last few pages of the cm9 post.
Click to expand...
Click to collapse
yeah, it works!!!!!!!!!!!1
Ah ****.
Will set kernel to insecure tomorrow when I have time
Sent from my Xperia Play using Tapatalk
KeiranFTW said:
Ah ****.
Will set kernel to insecure tomorrow when I have time
Sent from my Xperia Play using Tapatalk
Click to expand...
Click to collapse
just checked and the cm9 1 is the same.
Asdoos said:
-.- For me it boots... but the phone doesn't detect my SIM -.-...
Click to expand...
Click to collapse
Du musst deinen PIN deaktivieren und unter Einstellungen Manuellen Suchlauf der Netzwerke durchführen.
Doch weder HSDPA noch EDGE funktionieren.
I have Tried yours but it dosent work for mine.
Related
Here i've tried compile kernel for Neo/V users. Thanks to kormatoes for asking me to make kernel for AOKP. Then later i decided to make for Stock ICS too. Thanks to those who help me test these kernel since i've owned Xperia Ray not Xperia Neo/V
[ XNeo AOKP v1.2.431 ] AOKP BASED ROM NEW
- vids record / playback fixed
[ XNeo ICS v2.1.431 ] ICS 4.0.4 NEW
[ XNeo Kernel V2.0 ] ICS BASED ROM NEW Build from 4.1.H.0.4 kernel source for Play ICS Beta
### LOST & FOUND ###
[ XNeo ICS v1.1 Repack ] ICS based rom
[ XNeo AOKP v1.1 ] AOKP ROM
NOTE: [For stock ICS ONLY] If you come from other kernel, please flash this modules using cwm
Updates
// XNeo ICS v2.0 - 4.1.H.0.4 source, patches: ZRAM, smartassv2
// XNeo ICS v1.1 Repack - re-added Intellidemand. swap/ext4 support. tun.ko module in /res/modules
// AOKP v1.1 - added Intellidemand gov (dont use with IO vr, caused reboot when screen off)
Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
Click to expand...
Click to collapse
How to make simple ZRAM init.d script
1. Using Root Explorer, got to /sytem/etc/init.d/
2. press Menu then create new file
3. paste these in it
Code:
#!/system/bin/sh
sysctl -w vm.swappiness=40
echo "1" > /sys/block/zram0/reset
echo $((50*1024*1024)) > /sys/block/zram0/disksize
mkswap /dev/block/zram0
swapon /dev/block/zram0
4. close and save it as 60ZRAM
5. set permission to 777 or "rwxrwxrwx" (tick all)
6. take note: 50*1024*1024 = 50MB zram disksize. if you want to set 30MB, change 50 to 30.
Click to expand...
Click to collapse
((( Special Thanks to )))
DooMLoRD - thanks for his github sources
FXP - for AOKP Kernel sources
Kormatoes - for let me using his thread for starting up
ThilinaC - for nice AOKP bootlogo
Tenacius D - for being XNeo AOKP tester
Mikk36 - for being XNeo ICS tester
Night Elf - for his ramdisk source
Madfysh - XNeo v2.0 tester
Click to expand...
Click to collapse
GiT
https://github.com/sirkay
Finally....
sent by tapatalk via super xperia Neo
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
I did the flash, I'm using the AOKP kormatoes, and so far everything is normal.
juninromualdo said:
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
I did the flash, I'm using the AOKP kormatoes, and so far everything is normal.
Click to expand...
Click to collapse
as i know 4.1.C.0.7 sources support OTG. i never test it even with ray's kernel
Sent from my ST18i using xda premium
try ask someone that success using OTG
juninromualdo said:
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
Click to expand...
Click to collapse
Just use this, OTG mass storage will work.
shardul_seth said:
Just use this, OTG mass storage will work.
Click to expand...
Click to collapse
Tested.
sent by tapatalk via super xperia Neo
so it does work? 2-way call recording also support. check on my kernel thread in ray developement for call recording apps.
Sent from my ST18i using xda premium
sirkay said:
so it does work? 2-way call recording also support. check on my kernel thread in ray developement for call recording apps.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
I already test it with ur kernel. Usb otg cant work. Even i push setting for stock kernel. Its still doesnt work..
sent by tapatalk via super xperia Neo
@sirkay i attempted to flash aokp version on cm9 and it stuck on bootanimation forever ;p
How with battery life?
ZduneX25 said:
@sirkay i attempted to flash aokp version on cm9 and it stuck on bootanimation forever ;p
Click to expand...
Click to collapse
hmm wonder why coz am using FXP kernel source .. someone happened to succeed flash on cm9.
szymko1995 said:
How with battery life?
Click to expand...
Click to collapse
here to check it out --> http://forum.xda-developers.com/showpost.php?p=25565382&postcount=413
he using my kernel
@sirkay well cannot provide a logcat here, cause I already changed whole rom, just wanted to let you know i was trying on cm9 fxp115
I just tried this kernel on my Neo V with i-scream rom. I flashed it without wiping anything but wifi wasnt working. After that i made a factory reset and get an endless bootloop.
Was sounding like a good kernel but now i will try another. Thank you for your efforts.
szymko1995 said:
How with battery life?
Click to expand...
Click to collapse
KA15 + this kernel (don't know if it's the latest build, got it from sirkay directly):
Slow charging in the end is because of simultaneous video recording and GPS logging (will get even worse now because I added automatic bluetooth enabling ).
spiritualwar said:
I just tried this kernel on my Neo V with i-scream rom. I flashed it without wiping anything but wifi wasnt working. After that i made a factory reset and get an endless bootloop.
Was sounding like a good kernel but now i will try another. Thank you for your efforts.
Click to expand...
Click to collapse
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Sipi1302 said:
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Click to expand...
Click to collapse
where can i get stock wifi module??
Sent from my MT11i using XDA
talhah sabri said:
where can i get stock wifi module??
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Flash this kernel by shardul_seth Stock ICS w init.d support+root+cwm! [Final] latest version 3, boot into system turn the phone off and flash sirkay kernel.
Sipi1302 said:
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Click to expand...
Click to collapse
Do you mean this module? http://forum.xda-developers.com/showthread.php?t=1609617
If yes, i have try it with nightelf kernel and aokp rom but it's not working. I haven't time yet to try it again.
First of all,
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM/kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Ok then, now that u've read the disclaimer we can continue with me and this kernel.
Frankly i'm no dev, just know a little bit of linux thus i know howto compile kernel, and i like tinkering with kernel to include what i like.
by that i'm learning as i go, so go easy on me please
About the kernel name, MESA stands for Man-Eating Seals of Antiquity, codename for kernel 2.6.32.
https://en.wikipedia.org/wiki/List_of_Linux_kernel_names
Click to expand...
Click to collapse
Roughly features of this kernel include:
- base on Sony's official 4.1.B.0.587 kernel source, so i build this from ground up. patched to upstream 2.6.32.60. ics kernel should work with stock/custom rom based on stock ics 4.1.B.0.431 or 4.1.B.0.587, and jb kernel should work with source based jb rom eg cm10, aokp and pa. personally i've tested this with expeacer's exmiuiv4, lasan's miui, stock ics, fxp's cm10 and aokp jb.
- updated to upstream linux 2.6.32.61.
- hybrid kernel, support stock/stock based, cm9/cm9 based, cm10/cm10 based rom.
- patched with Con Kolivas's patchset that includes bfs task scheduler v0.404, so this is a bfs kernel. stock kernel and all of custom kernel here so far uses cfs cpu scheduler. read about bfs cpu scheduler here.
- oc upto 1.8ghz and using 100mhz steps. default boot only use 1ghz.
- uv sysfs interface to modify voltage. i also decrease voltage abit. for anyone who wish to use stock voltage, heres stock voltage table
- cpu governors includes default stock ondemand, interactive, powersave, perfomance and userspace, i've added ondemandx, intellidemand, smartassV2, smoothass, interactivex, brazilianwax, scary, lulzactive, lagfree, smartass, minmax and savagedzen. default booting governor is interactive, its been updated/backported from kernel 3.x. read about cpu governors here.
- disk io scheduler includes deadline, sio, cfq, noop, anticipatory, zen, bfq and vr. default booting disk io scheduler is sio. read about io schedulers here.
- dual recovery, cwm and twrp. access cwm by pressing volume down button and twrp by pressing power button. also can swap those keycode by adding "swap.recovery.keycode=true" to build.prop. phone will vibrate slightly before entering both recovery as indicator. also included autoroot which wont give problem with miui rom, init.d startup script and unsecure ramdisk for adb root access. v4.7 got twrp 2.4.3.0 and cwm 6.0.3.9.
- swap and zram support.
- ext2/3/4 support.
- usb otg support.
- ntfs read/write with fuse module built in.
- samba support with cifs module built in.
- wifi modules integrated into kernel, then added into ramdisk. it will be insmod directly from ramdisk and existing wifi modules in rom wont be touched.
for full itsy bitsy changes read the changelog.txt in download folder.
and to comply and abide with gpl, source diff also included in the download folder.
Click to expand...
Click to collapse
Howto install:
1- be sure u already unlocked bootloader.
2- download correct kernel for your rom and phone and make sure md5 checksum matches. jellybean rom should use the kernel with "jb" in filename. or just use the new hybrid which support cm9/cm9 based, cm10/cm10 based rom and cm10.1/cm10.1 based rom.
3- if kernel downloaded in *.7z format u need to unpack it using winrar or 7zip.
4- flash the kernel via fastboot.
Click to expand...
Click to collapse
Troubleshoot:
- ini.d script not working? read this
- stuck at booting after flashing kernel? wait a little bit longer. kernel needs to run some script when booting.
- still stuck at booting? wipe cache and dalvik cache via recovery.
Click to expand...
Click to collapse
Reporting bugs:
1- if u got freeze problem, paste logcat to pastebin and give me the link.
2- if u got sudden reboot, after the sudden reboot, paste content of /proc/last_kmesg to pastebin and give me the link.
3- also tell me which phone u use, with which rom and which kernel.
what is that logcat and dmesg thingy u kept talking about? google for it.
how to get it? use this
Click to expand...
Click to collapse
Credits also goes to:
- google for this awesome platform, android.
- sony for releasing the kernel source.
- fxp team for some of their patch i use, and for the awesome cm10.
- kamarush for helping with problem i've had with wifi modules earlier, and also for the ramdisk i've taken from his minicmlite v3 kernel.
- doomlord for some of his patch i use.
- krizky82 for some of his patch i use.
- adridu59 for some of his patch i use.
- <insert your name here if u feel that i've failed to mention your name>
Click to expand...
Click to collapse
nice, good work.
can you please post the sources?
far fetched request,
can you make this for cm9?
Good work, i wonder if someone could develop a BFS Kernel for Mini pro. i used to use BFS with my Optimus One.
Nice one mate....!! i think it is more battery efficient( uses less battery)
gandhar said:
nice, good work.
can you please post the sources?
far fetched request,
can you make this for cm9?
Click to expand...
Click to collapse
because i had ****ty connection speed i wont be able to setup github and the like.
but diff patch are in download folder. use that to patch sony's official 4.1.B.0.431 and u'll get exact source as on my pc
Good job Mate
Sent from my SK17i using XDA
an0nym0us_ said:
because i had ****ty connection speed i wont be able to setup github and the like.
but diff patch are in download folder. use that to patch sony's official 4.1.B.0.431 and u'll get exact source as on my pc
Click to expand...
Click to collapse
yeah, thanks..
just wondering
what if you compile with fxp ramdisk, what happens then?
gandhar said:
yeah, thanks..
just wondering
what if you compile with fxp ramdisk, what happens then?
Click to expand...
Click to collapse
i've never tested, but probably wont boot. fxp's cm9 need its own kernel config too, not just difference in the ramdisk.
coolbuy said:
Good work, i wonder if someone could develop a BFS Kernel for Mini pro. i used to use BFS with my Optimus One.
Click to expand...
Click to collapse
whats BFS buddy???
an0nym0us_ said:
i've never tested, but probably wont boot. fxp's cm9 need its own kernel config too, not just difference in the ramdisk.
Click to expand...
Click to collapse
i'll try that out someday and let you know if it works out.
good day
whalesplaho said:
whats BFS buddy???
Click to expand...
Click to collapse
http://ck.kolivas.org/patches/bfs/sched-BFS.txt
http://ck.kolivas.org/patches/bfs/bfs-faq.txt
an0nym0us_ said:
http://ck.kolivas.org/patches/bfs/sched-BFS.txt
http://ck.kolivas.org/patches/bfs/bfs-faq.txt
Click to expand...
Click to collapse
thanks buddy....
I installed your kernel with hybrom v2 wt19i at the monent working perfect good work
Sent from my WT19i using XDA
Bluetooth not working with stock rom.
Wifi works perfect with the MESA Modules
fabiode34 said:
Bluetooth not working with stock rom.
Wifi works perfect with the MESA Modules
Click to expand...
Click to collapse
Umm can anyone else confirm this?
Forgot to test bt myself on stock rom earlier. Currently on exmiui and bt works for send/receive file to/from my laptop.
Congratulations men, waiting for xmp
Sent from my SK17a using xda premium
an0nym0us_ said:
Umm can anyone else confirm this?
Forgot to test bt myself on stock rom earlier. Currently on exmiui and bt works for send/receive file to/from my laptop.
Click to expand...
Click to collapse
Here it says "Activating..."
But nothing else... Can you send me the bluetooth modules from your current rom?
fabiode34 said:
Here it says "Activating..."
But nothing else... Can you send me the bluetooth modules from your current rom?
Click to expand...
Click to collapse
Did u reboot and try again after reboot?
If that didn't work too i'll test myself later by restoring my stock rom cwm backup.
Yes i already tried rebooting.
Still says "Activating..."
bluetooth works fine for me and wlan i forgot to install wifi modules (downloading now) i think it will works fine
Really nice work and thank you
Btw it's oc 1.6
Edit: my Rom MIUI v4 2.6.15
^AminKernel^
New Release!! PRO-P7005 Stable!!! >>> http://forum.xda-developers.com/showpost.php?p=35936094&postcount=591
Features
Based on latest Scritch Sources
Drived From Scritch sources:
Triple Buffer
Network Updates
Bootmanager
Built with Linaro and O3 Optimization
Cpu optimization
Battery tweaks
Performance improvements
Cpu Governors Updated and tweaked for qsd8k
Smartass
Interactive
Scary
MinMax
smartassV2
interactiveX
SavagedZen
Lagfree (thanks to ThJap)
BazillianWax
Smoothass
OC & UV
128-1228 !!!!
set default stock cpufreq in ramdisk
VDD
Sio i/o sched
Vr
deadline
bfq
ect...
Performance Tweaks
[/FONT]
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download link:
Cm10-P7001-1228
Cm9-96-1113
http://www.mediafire.com/download.php?eu15ybe7bwncaab
Cm10-96-1113
http://www.mediafire.com/?p53p51tgmbtmb3o
Other kernels:
http://rapidgator.net/folder/1369420/AminKernels.html
My Sources:https://github.com/Amin-jkr/semc-kernel-qsd8k-JB
Guide:
Flash through FlashTool
Only Unlocked Bl
old:
Latest Release ,P6006 Download and changelog
Download Cm9-P6005:
http://www.mediafire.com/download.php?yi0enn6sjxww3pd
Credits:
Scritch007
FreeXperia Team
championswimmer
Thjap
DoomLord
nobodyatall
ktg team
Androxid for flashtool
Changlog:
A4007.P1140
first release
A5001.P1400
Wifi Fixed
Clean up
10xKernel-P5003
some device's problem should be fixed
optimized frq table
OC upto 1113
Battery Tweaks(battery saving)
Awesoe man going to test soon thanks!!!
Edit doesnt work on my rom for wifi haha but no toher kernals do aswell!! but seems very sooth thanks!!!
Finally a custom kernel for ICS !(Other than champs)
Very happy for all the X10 users.
Flashing. Will report soon. :fingers-crossed:
mcsqwizzys98 said:
Awesoe man going to test soon thanks!!!
Edit doesnt work on my rom for wifi haha but no toher kernals do aswell!! but seems very sooth thanks!!!
Click to expand...
Click to collapse
So far only Fera's kernel in combination with McSqwizzys98 Rom is ablé to give Wifi and SmartassV2. I was searching for this combination (even made a thread in Q&A for it).
Nonetheless I'm very happy that there is kernel development!
I'll try it anyway (No offense MqSqwizzy98 )
Nice dude, keep up the work ! Esspecially on Kernels! It works preety good! And I love the OC!
Many thanks amin .waiting for a long time this type of kernel. Good luke in kernel dev
was tying to provide this kernel for locked BL but failed...
Amin` said:
was tying to provide this kernel for locked BL but failed...
Click to expand...
Click to collapse
For what? Is there any ICS rom for locked bootloader?
Thats not important.
U could try to port kernel 3.X to X10 that would be nice
Amin` said:
was tying to provide this kernel for locked BL but failed...
Click to expand...
Click to collapse
its ok buddy.....Special Privilege to unlock bootloader
srsly a great work man....thanks a lot for building it....
Jus continue yours work....Liked your work
All the best...keep it up buddy...
wifi modules?
Ultimategeppie said:
So far only Fera's kernel in combination with McSqwizzys98 Rom is ablé to give Wifi and SmartassV2. I was searching for this combination (even made a thread in Q&A for it).
Nonetheless I'm very happy that there is kernel development!
I'll try it anyway (No offense MqSqwizzy98 )
Click to expand...
Click to collapse
Hey man no offence taken im going to try and get other kernals working tonight especcialy this one!!!!!
Sent from my Xperia X10i using xda premium
AlexRuhl said:
wifi modules?
Click to expand...
Click to collapse
it's for cmfxp based so the modules are in the rom already, But I can make them if you want?
Amin` said:
it's for cmfxp based so the modules are in the rom already, But I can make them if you want?
Click to expand...
Click to collapse
If you could make them that would be great!
Sent from my Xperia X10i using xda premium
mcsqwizzys98 said:
Hey man no offence taken im going to try and get other kernals working tonight especcialy this one!!!!!
Sent from my Xperia X10i using xda premium
Click to expand...
Click to collapse
Waiting for it :fingers-crossed:
Great Great Work MY Dear Bro , Amin !
Good Luck :fingers-crossed:
wifi not work on FXP 136.
10xKernel A5000.P1325 Released
Note: Flash the wifi module
changlog :
Hope Wifi is Fixed!
Download
ftf file:
http://www.mediafire.com/?x741kkr5w7co49g
wifi module:
http://www.mediafire.com/?hwascrih1cgbb5l
Tested new kernel with Wifi module.
On Fera's ICS kernel (on McSqwizzy98 AOKPcb lite 2-ROM) I've got Wifi working out of the box (no wifi module needed)
But I'm glad to test other kernels. So here goes.
[Downloading Amin's kernel...] check
[Installing ftf....] check
[Installing wifi module...] check
[Wipe cache and wipe dalvik...] check
[Rebooting....] check
[Activating wifi...] fail
Sorry Amin. Doesn't work in my situation.
Maybe good to know:
On this Rom (with fera's kernel and also with your kernel) I also haven't got data (need to do the *#*#4636#*#* trick).
Thanks for your efforts, though. If I can test again, I'll sure do it.
Ultimategeppie said:
On Fera's ICS kernel (on McSqwizzy98 AOKPcb lite 2-ROM) I've got Wifi working out of the box (no wifi module needed)
But I'm glad to test other kernels. So here goes.
[Downloading Amin's kernel...] check
[Installing ftf....] check
[Installing wifi module...] check
[Wipe cache and wipe dalvik...] check
[Rebooting....] check
[Activating wifi...] fail
Sorry Amin. Doesn't work in my situation.
Maybe good to know:
On this Rom (with fera's kernel and also with your kernel) I also haven't got data (need to do the *#*#4636#*#* trick).
Thanks for your efforts, though. If I can test again, I'll sure do it.
Click to expand...
Click to collapse
Use FXP CM9.1 Then u wont need to do the trick
Hello guys. Those of you, who have been monitoring ray's dev section, know, that there is such a kernel for GB, as "pure emerald' or "aire's" kernel. But its problem is that it's for GB So i decided to do this kernel for ICS. I'm from russia and 4pda, and on our forum we don't like many "svistoperdelkas", which means that we don't like to have many useless (and sometimes not stable) features.
So, you can understand now, why there are no many features in my kernel which you can find in sirkay's kernel, for example. The advantage of such a kernel is that there is no any trash in it, only main things.
Features:
Clean ramdisk
Removed Fota
ext2, ext3, ext4, vfat, ntfs support
USB OTG support
Init.d support
Linaro
DooMKernel recovery (it's the best, IMHO)
Added smartass2 governor (a very battery friendly one)
Swap, ZRam
2way call recording (uses CallRecoder by skvalex)
And now smth really new (for my kernel at least). Now YOU choose what OC to use. I've got 3 versions of this kernel.
1) 1.4 OC + uv (very battery friendly)
2) 1.4 OC no uv (for those ones, where uv causes random reboots) (not so battery friendly)
3) 1.6 OC + vdd. (not battery friendly at all, only for performance)
Download - link
One more thing. You can either believe it or not. But still. My HDD is dying. First 4GB of it are already covered with bad blocks. Also, the 10th GB is "bad". These bad blocks are "hardware". My linux is installed somewhere at 40th gb, but i think it won't take very long untill it's dead too. The first version of my kernel was downloaded for 260 times. Not so much as on 4pda (2000+ ), but still quite a lot. If every person who have downloaded it donated 1$ for me - i could buy a new HDD. So, if you are not indifferent to me and my HDD, please, donate to me thanks in advance
Wow!!! Finally a new kernel!
I hope it's battery friendly :laugh:
Aire kernel was my favourite GB kernel
Best regards
:good:Tnx,this is just what i needed....flashed&testing...
:good:
P.s.: I don't like "svistoperdelkas" too...
flashed, i'm trying it :good:
Finally new dev kernel.. Welcome dude! Can I use this kernel for MIUI?
Sent from my ST18i using xda premium
frogerra said:
Finally new dev kernel.. Welcome dude! Can I use this kernel for MIUI?
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
yep.it works perfectly on every stock-based rom
support init.d?
I've been looking forward to this.
no, no init.d. but i'll to try add it in next version.
vdsirotkin said:
we don't like many "svistoperdelkas"
Click to expand...
Click to collapse
'Gimmicks' or 'bells and whistles'.
upd: also add to theme string tag [ICS] at the beginning.
[KRNL][ICS] VDS kernel v1.0 (11/10)
Click to expand...
Click to collapse
)
vdsirotkin said:
no, no init.d. but i'll to try add it in next version.
Click to expand...
Click to collapse
wil wait for your next version.
can i use it with CM10 ?
konikpk said:
can i use it with CM10 ?
Click to expand...
Click to collapse
no. i'm not sure, but 99% that no
vdsirotkin said:
Hello guys. Those of you, who have been monitoring ray's dev section, know, that there is such a kernel for GB, as "pure emerald' or "aire's" kernel. But its problem is that it's for GB So i decided to do this kernel for ICS. I'm from russia and 4pda, and on our forum we don't like many "svistoperdelkas", which means that we don't like to have many useless (and sometimes not stable) features.
So, you can understand now, why there are no many features in my kernel which you can find in sirkay's kernel, for example. The advantage of such a kernel is that there is no any trash in it, only main things.
Features:
OC (aka overclock) up to 1.4 gHz
UV aka undervolt
DooMKernel recovery (it's the best, IMHO)
Added smartass2 governor (a very battery friendly one)
Swap, ZRam
2way call recording (uses CallRecoder by skvalex)
Thats all A superlight kernel, as you can see Hope, that some of you share our (4pda guys') ideals in kernel features. Good luck!
Download
BTW, if you want to support my kernel (i don't believe in that ), you can donate to me thanks in advance
Click to expand...
Click to collapse
how do you define "svistoperdelkas" in kernel? debugging enabled in defconfig? what features my kernel have that yours dont?
sirkay said:
how do you define "svistoperdelkas" in kernel? debugging enabled in defconfig? what features my kernel have that yours dont?
Click to expand...
Click to collapse
wow wow, i didn't want to hurt you
OC up to 1.6, many governors, I\O shedulers and everything like that
vdsirotkin said:
wow wow, i didn't want to hurt you
OC up to 1.6, many governors, I\O shedulers and everything like that
Click to expand...
Click to collapse
sirkay said:
how do you define "svistoperdelkas" in kernel? debugging enabled in defconfig? what features my kernel have that yours dont?
Click to expand...
Click to collapse
Calm,my friends,i think that you have two different approach in kernel compiling,vdsirotkin's one is good for battery,while sirkay's one is more"experimental" and good for performance,no-one is better than another:simply they are different..:beer::beer::beer:
Inviato da me!
vdsirotkin said:
wow wow, i didn't want to hurt you
OC up to 1.6, many governors, I\O shedulers and everything like that
Click to expand...
Click to collapse
whats wrong with oc to 1.6?? my ray is stable at 1.6 so thats fine for me, nobody forces u to oc, same for governors and shedulers, not a good thing to point at another devs work and telling thats bad mine better
and arcatarc im not sure that the "simple" kernel is more battery frindle or more stable, will test during the weekand
funiewski said:
whats wrong with oc to 1.6?? my ray is stable at 1.6 so thats fine for me, nobody forces u to oc, same for governors and shedulers, not a good thing to point at another devs work and telling thats bad mine better
and arcatarc im not sure that the "simple" kernel is more battery frindle or more stable, will test during the weekand
Click to expand...
Click to collapse
even if it's stable, not a very great speed advantage does not worth battery drain.
vdsirotkin said:
wow wow, i didn't want to hurt you
OC up to 1.6, many governors, I\O shedulers and everything like that
Click to expand...
Click to collapse
arcatarc said:
Calm,my friends,i think that you have two different approach in kernel compiling,vdsirotkin's one is good for battery,while sirkay's one is more"experimental" and good for performance,no-one is better than another:simply they are different..:beer::beer::beer:
Inviato da me!
Click to expand...
Click to collapse
im not mad, just my curiosity to know how do you define "trash". if that so, then me too dont like "svistoperdelkas". i always made 2 version, one for users (with features they've requested) and one for me (with only smartassv2 and intellidemand gov, freq max 806mhz, dont UV, didnt use zram, disabled debugging, disabled unused modules).
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and Tim Graham(tomgus) ,champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Ported Newer Kgsl Drivers by me
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7000] Drived From Thjap's Sources:
[P7000] Swap Support
[P7000] Vr Sched
[P7000] Sio Sched
[P7000] Deadline
ect...
[P7000] bzip2 Support
[P7000] Tun Support
[P7000] Ext3 , Ext4 , NTFS File system Support
[P7000] Updated Yaffs
[P7000] Lzo , Bzip , Gzip Decompression
[P7000] OC_UV
[P7000] Optimized Cpu Freq Table
[P7000] Unlocked many Cpu Freq-Voltages
[P7000] 128-1228!!!
[P7000] Memory Optimization
[P7000] Battery Tweaks
[P7000] Speed Tweaks
Many More...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download Links Can be Found Here
Amin` said:
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Stock Kernel:
This Comes Later...
Click to expand...
Click to collapse
THX Very much hero !! but where is 32 kernel ???
Amin` said:
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Stock Kernel:
This Comes Later...
Click to expand...
Click to collapse
Exellent idea but cannot download, error links!!! Please adjust links!
tori_mc said:
Exellent idea but cannot download, error links!!! Please adjust links!
Click to expand...
Click to collapse
Solved!
SDE Kernel:
- No bootimage (an old bootimage flashed then blank screen then appeared again after loaded all libs and come to bootanimation)
- No vdd????
Did you test all before posting?
BTW, fast, smooth with new ksgl, wifi works, data works
silveraero said:
SDE Kernel:
- No bootimage (an old bootimage flashed then blank screen then appeared again after loaded all libs and come to bootanimation)
- No vdd????
Did you test all before posting?
BTW, fast, smooth with new ksgl, wifi works, data works
Click to expand...
Click to collapse
it has vdd..
about bootimage it's not a big deal...but I'll fix it...
I flashed my phone over 10 times yesterday to test this kernels and you ask me did I test them?
Amin` said:
it has vdd..
about bootimage it's not a big deal...but I'll fix it...
I flashed my phone over 10 times yesterday to test this kernels and you ask me did I test them?
Click to expand...
Click to collapse
Just asking if you test these things mate. There is no VDD level in CPU setting in CyanogenMod Setting menu, also adb mask controller told me that vdd file dors not exist.
Finally,a new kernel for SDE thanks a lot Amin...keep it up!! I will test it soon and report if it's necessary!! great job...thanks again buddy!!
Edit: well,tested...scrolling is laggier on home screen...and wifi seems to be a little lazy to connect...for example at phone startup it don't connect automatically...I have to go in settings-wifi and press connect manually! Just a little request buddy..if it's possible...can you add all other cpu governor from achotjan's kernel please?thanks a lot
Sent from my X10i using xda premium
InternationalPlayer71 said:
Finally,a new kernel for SDE thanks a lot Amin...keep it up!! I will test it soon and report if it's necessary!! great job...thanks again buddy!!
Edit: well,tested...scrolling is laggier on home screen...and wifi seems to be a little lazy to connect...for example at phone startup it don't connect automatically...I have to go in settings-wifi and press connect manually! Just a little request buddy..if it's possible...can you add all other cpu governor from achotjan's kernel please?thanks a lot
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Well I don't have any issue with wifi and CPU governors from Achotjan's kernel are there. Just, battery drain fast, 50% in 6 hours without using.
Sent from my X10i using xda premium
Hey Amin not working with MM TEAM CM 7.2 | V 1.5 i mean it works boots just very laggy and no camera or wifi other then that its great
azeez77 said:
Hey Amin not working with MM TEAM CM 7.2 | V 1.5 i mean it works boots just very laggy and no camera or wifi other then that its great
Click to expand...
Click to collapse
mm's cm is based on stock rom...you should try stock kernel when it's released...
silveraero said:
Well I don't have any issue with wifi and CPU governors from Achotjan's kernel are there. Just, battery drain fast, 50% in 6 hours without using.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Many governors are missing (Brazilian wax,interactive,smoothass,savagedZen and some others)...I think that amin included only Th's governors!! I will test the kernel again today..just to see if I can confirm problems reported!!
Sent from my X10i using xda premium
New Release is on the way...
but I have to test some stuff...
i`m ready to test things if u want\
Hi
I've tested the SDE version and i it WLOD after overclocking to 1228...
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Gingerbread?
Amin` said:
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Click to expand...
Click to collapse
Would any of your kernels work on 2.3 non-cm7/cm9 roms?
Feedback
Amin,
not work on [ROM]"X10S" |v9 Final released FTF File| 21/07/2012
blank screen after boot logo.
Amin` said:
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Click to expand...
Click to collapse
Links are not working again!
tori_mc said:
Links are not working again!
Click to expand...
Click to collapse
Confirmed
Sent from my X10i using xda premium