Related
Hi,
I plan to disappear into the woods and come back out when I've finished my thesis (more or less). So I'm interested in buying a solar panel to use with my transformer and since people here seem pretty knowledgeable about charging the transformer I thought I would run it by you guys to make sure I do not miss something important.
I've gathered so far that I will need at least an 11v panel.
Also, it seems I need USB 3.0 to charge by USB. Is this correct?
And if I can't get USB 3.0 I will have to modify a 2.0 wire or plug or whatever... I prefer to avoid this
What should I go for in terms og Watts?
Would it be reccommendable to buy a panel with a battery to get a more even current?
Recommandations would be great!
Wow, I thought I was the only one that even remotely cared about this!
I have a Goal0 Nomad 7m. It's 12v, and I have had no luck getting it to charge my TF. Do you think it might be because of the USB 3.0 requirement?
Great that I'm not alone! Too bad that it doesn't work though...
I got the thing about USB 3.0 from this thread;
http://forum.xda-developers.com/showthread.php?t=1087321
reading it again I noticed this line;
"The Asus charger does need a 3.0 cable extension to work. But with a DIY charger you don't need USB 3.0 cables or connectors."
So I'm not really sure if it makes a difference whether you use USB 2.0 or 3.0.
Anyway the specs for your Nomad says that it's 5v for USB output and 12v for DC output so I'm guessing that's why it doesn't work with the transformer.
Miki T. said:
Great that I'm not alone! Too bad that it doesn't work though...
I got the thing about USB 3.0 from this thread;
http://forum.xda-developers.com/showthread.php?t=1087321
reading it again I noticed this line;
"The Asus charger does need a 3.0 cable extension to work. But with a DIY charger you don't need USB 3.0 cables or connectors."
So I'm not really sure if it makes a difference whether you use USB 2.0 or 3.0.
Anyway the specs for your Nomad says that it's 5v for USB output and 12v for DC output so I'm guessing that's why it doesn't work with the transformer.
Click to expand...
Click to collapse
You're right!...that actually means there's options. Shouldn't something like this work?
http://www.amazon.com/Portable-Inve...=UTF8&coliid=IUJZFD56YRM5K&colid=HQA2VAAM7MXY
I think I'm gonna have to order this, and give it a shot. I already have the panel & the DC jack, so I might as well.
Hey nice find! It seems like it should work, though don't take my word for it. I'm really ignorant of this stuff which is why I started the thread to begin with In any case $22 for a charger sounds fairly cheap.
Let me know if it works or not!
Solar panels that put out more than 28W (5V, 2A = 10W + 15V, 1.2A = 18W) would be enough, but then you'd likely want to run it through an inverter to get 110v AC, then the ASUS charger.
Until and unless ASUS comes out with a car charger that would work with the dock, running an inverter to generate an AC signal, then running it through the AC adapter will be the way to go.
Figuring in efficiency losses, you'll probably want 50-75W worth of solar panels for this to work. You can also use a 12v battery as a ballast.
FrayAdjacent said:
Solar panels that put out more than 28W (5V, 2A = 10W + 15V, 1.2A = 18W) would be enough, but then you'd likely want to run it through an inverter to get 110v AC, then the ASUS charger.
Until and unless ASUS comes out with a car charger that would work with the dock, running an inverter to generate an AC signal, then running it through the AC adapter will be the way to go.
Figuring in efficiency losses, you'll probably want 50-75W worth of solar panels for this to work. You can also use a 12v battery as a ballast.
Click to expand...
Click to collapse
You don't need 5V and 12V, only 12V. The Asus charger only puts out 5V for non-transformer devices. Don't introduce all the loss from the 110V converter, just charge a 12V battery with a panel(the Asus will draw 18 watts at full charge), then charge the transformer from the battery. Just get a usb extender, cut it, and hook negative to pin 4 and positive to pin 1. I would recommend a 5 Ohm resistor to limit amperage, but it isn't necessary.
I'd like to hear how it works out.
I was considering putting some flexible solar panels on the back of the transformer. But with the dock, I've got more than enough power for my needs. Plus, the back of the transformer won't get that much sunlight.
I'm now moving on to trying to put solar panels on the back of my cellphone (Huawei U8800). It's a great phone, and the battery lasts all day, so long as I don't play too many games.
One thing you might want to consider is an external battery pack. They are pretty cheap here in China, and have huge batteries in them. They even have some with built in solar panels. I'm sure you could find one that could recharge the Transformer. Then you could have the battery pack in the sun charging via the solar panel, and you sitting in the shade with the transformer. At night plug the battery up to the transformer to let it charge while you sleep. The transformer with dock should have more than enough battery life to last all day.
If I come across any useful information during my research, I'll let you know.
Miki T. said:
Hey nice find! It seems like it should work, though don't take my word for it. I'm really ignorant of this stuff which is why I started the thread to begin with In any case $22 for a charger sounds fairly cheap.
Let me know if it works or not!
Click to expand...
Click to collapse
I bought it! ...and it will be here this afternoon. Thanks to Amazon Prime local delivery .
I'll let you know how/if it works out.
philburkhardt said:
I bought it! ...and it will be here this afternoon. Thanks to Amazon Prime local delivery .
I'll let you know how/if it works out.
Click to expand...
Click to collapse
Stuff like that is great for the car, but you're gonna lose SO much efficiency through it, then even more loss from the Asus charger plugged into it. A 15W solar panel should be enough to charge the TF directly. Using an inverter with the asus charger, you'll probably need 50-100W. Just FYI.
msticninja said:
Stuff like that is great for the car, but you're gonna lose SO much efficiency through it, then even more loss from the Asus charger plugged into it. A 15W solar panel should be enough to charge the TF directly. Using an inverter with the asus charger, you'll probably need 50-100W. Just FYI.
Click to expand...
Click to collapse
Yup, you're right. No go on charging the TF. Like you said, it will be great for charging things in the car. Just not off my 12W solar panel. I think I'm gonna have to upgrade my panel .
philburkhardt said:
Yup, you're right. No go on charging the TF. Like you said, it will be great for charging things in the car. Just not off my 12W solar panel. I think I'm gonna have to upgrade my panel .
Click to expand...
Click to collapse
The real joy of the TF is that it charges directly from 12 volts, so, assuming you have a 12 volt 12W panel, you should go get a 12 volt battery, 4AH(amp-hour) at least. It will be about the size of an old 6 volt lantern battery. Hook the panel to the battery to charge the battery, hook a female usb port to the battery, and hook the TF directly to the female usb port. You'll probably be able to get through a whole night on a 4AH battery + the TFs battery.
Great! Lots of useful replies... thanks a lot!
I plan on not using the adapter and use a USB extender the way msticninja wrote, since I don't want to carry or pay for something that delivers 50-100W.
I think I've found the panel I am going to buy. I cannot include outside links until I've posted 8 messages, but you can easily find it by googling "Portable 9x 2.5 W Solar Panel". So 22.5 Watt... that should suffice. That's at 18v * 1.25a.
It seems that all the solutions that comes with a battery are all quite pricey, but then I don't really need some fancy battery do I? Some do-it-yourself solution should be fine as long as the battery is rechargeable, 4AH("at least") and 12v right?
Do I want to reduce the voltage of the solar panel to 12 instead of 18? And should I worry about overcharging the battery?
By the way, is the battery an absolute necessity or is that only if I want to charge during the evening/night?
What I hope to be able to do is; be away from mains for about one week at a time, and use my laptop, say, 8 hours a day. I hope this will be enough...
Miki T. said:
That's at 18v * 1.25a.
Do I want to reduce the voltage of the solar panel to 12 instead of 18? And should I worry about overcharging the battery?
Click to expand...
Click to collapse
The Asus charger will put out 15V at most, as marked on the charger itself. I don't think I'd use anything higher than 12V into the tablet/dock. You'd probably want to use some kind of voltage regulator to drop the 18V to 12V.
Without knowing the internal workings of the dock/tablet, I can't really comment more than that.
Miki T. said:
Great! Lots of useful replies... thanks a lot!
I plan on not using the adapter and use a USB extender the way msticninja wrote, since I don't want to carry or pay for something that delivers 50-100W.
I think I've found the panel I am going to buy. I cannot include outside links until I've posted 8 messages, but you can easily find it by googling "Portable 9x 2.5 W Solar Panel". So 22.5 Watt... that should suffice. That's at 18v * 1.25a.
It seems that all the solutions that comes with a battery are all quite pricey, but then I don't really need some fancy battery do I? Some do-it-yourself solution should be fine as long as the battery is rechargeable, 4AH("at least") and 12v right?
Do I want to reduce the voltage of the solar panel to 12 instead of 18? And should I worry about overcharging the battery?
By the way, is the battery an absolute necessity or is that only if I want to charge during the evening/night?
What I hope to be able to do is; be away from mains for about one week at a time, and use my laptop, say, 8 hours a day. I hope this will be enough...
Click to expand...
Click to collapse
You will need some sort of voltage regulation to maintain 12V. That's pretty much a requirement for any solar charging system. Panels themselves do not usually have regulation, so the output voltage of the panel is a function of the amount of light the panel is receiving.
This is a really quick search, but this satisfies all the requirements for what you need, and it's only $20:
http://www.amazon.com/Ramsond-SunShield-Charge-Controller-Regulator/dp/B0031FQ1S6
Feel free to search for alternatives, but use that as your starting point for searching.
Another quick search to give you an idea what you're looking for as far as batteries:
http://www.google.com/products/catalog?q=12v+4ah+battery&oe=utf-8&rls=org.mozilla:en-USfficial&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=15393345737619657558&sa=X&ei=lq5MTsCGGMSCsgLgivmCBw&ved=0CHIQ8wIwAA
If I made something for myself, I'd use Lithium Ion cells and use a smart lipo charger to regulate the solar panel output, but it needs more research, and will cost more.
This will be interesting!
I've ordered the parts - the panel I mentioned, the Ramsond SunShield 12V 8A Solar Charge Controller Regulator that msticninja suggested and a Super Rechargeable Li-ion Battery, 12V 6800mAh. I ordered the panel and the battery off of sunsky. They seem to have very fair prices.
All the parts came to a total of $164, shipping included. Compared to complete sets with the same specs I'd say that's a really good deal, provided I make it work
I'll let you know!
Miki T. said:
This will be interesting!
I've ordered the parts - the panel I mentioned, the Ramsond SunShield 12V 8A Solar Charge Controller Regulator that msticninja suggested and a Super Rechargeable Li-ion Battery, 12V 6800mAh. I ordered the panel and the battery off of sunsky. They seem to have very fair prices.
All the parts came to a total of $164, shipping included. Compared to complete sets with the same specs I'd say that's a really good deal, provided I make it work
I'll let you know!
Click to expand...
Click to collapse
Give me a link to that Li-ion battery. If it doesn't have it's own charging circuit, you'll need to get a lipo charger instead of/in addition to the Ramsond regulator. I'll check it out for you.
EDIT: If it's this one: http://www.ebay.com/itm/DC-12V-6800mAh-Super-Rechargeable-Lithium-ion-Battery-/150530536976
it's hard to say, but I think it has it's own charging circuit, because the wall wart included with it doesn't look like a lithium charger. But it does have a charge finished light, so, if the light stays on when the battery isn't plugged in, you should be okay. If the green light only turns on when a fully charged battery is connected, then you might not be fine. Confirm what you're getting by posting a link, and I'll try to make sure. If it doesn't have it's own charging circuit, the battery will explode in a fireball.
EDIT2: This one has it's own charging circuit, and it sounds like it's what's inside the other one I linked, so you should be okay if it's either of these.
http://www.lunershop.com/product_info.php?language=en¤cy=USD&products_id=2566
Just wondering if something like this would help.
http://www.ioffer.com/i/solar-battery-panel-usb-charger-for-cell-phone-mp3-mp4-147450373?source=eisi
I have no understanding of electricity, except the basic 4th grade stuff. This is a cool project thought. I'm planning on making a 55 paracord strap that will attach to my case and fit like a messenger bag. Having solar panels to charge it and a paracord strap would make the TF a nice camping device
SwiftLegend said:
Just wondering if something like this would help.
http://www.ioffer.com/i/solar-battery-panel-usb-charger-for-cell-phone-mp3-mp4-147450373?source=eisi
I have no understanding of electricity, except the basic 4th grade stuff. This is a cool project thought. I'm planning on making a 55 paracord strap that will attach to my case and fit like a messenger bag. Having solar panels to charge it and a paracord strap would make the TF a nice camping device
Click to expand...
Click to collapse
Nope, as discussed before, the TF uses 11-15V to charge, and normal USB chargers/backup batteries only put out 5V.
msticninja said:
Give me a link to that Li-ion battery. If it doesn't have it's own charging circuit, you'll need to get a lipo charger instead of/in addition to the Ramsond regulator. I'll check it out for you.
EDIT: If it's this one: http://www.ebay.com/itm/DC-12V-6800mAh-Super-Rechargeable-Lithium-ion-Battery-/150530536976
it's hard to say, but I think it has it's own charging circuit, because the wall wart included with it doesn't look like a lithium charger. But it does have a charge finished light, so, if the light stays on when the battery isn't plugged in, you should be okay. If the green light only turns on when a fully charged battery is connected, then you might not be fine. Confirm what you're getting by posting a link, and I'll try to make sure. If it doesn't have it's own charging circuit, the battery will explode in a fireball.
EDIT2: This one has it's own charging circuit, and it sounds like it's what's inside the other one I linked, so you should be okay if it's either of these.
http://www.lunershop.com/product_info.php?language=en¤cy=USD&products_id=2566
Click to expand...
Click to collapse
Fireballs are serious business...
The one I ordered is the blue one. I can't really confirm with a link since I cannot post external links until 8 posts but there shouldn't be any mistake. And it does say the following about it;
With its multi-protective device, the inner circuit pervents the box from over-recharging or over-discharging.so it should be safe I think...
Has anyone found a portable Battery pack that we can use on the TF? I have several that I have used for my iPhone and my old iPad2 but all are only 5v. is there one out there that can charge out TF or is the keyboard dock the only way to go for extra Battery?
There are several battery packs used for notebook computers that will work listed on Amazon. Just be sure they have a 12Volt output. EverReady had as battery pack that will also work but you will need an adapter provided by them. The key is that you need an output of 12 to 15 volts to charge the TF or Keyboard. You might read Devcake's post on a DIY charger for the TF as information on the voltages required to charge the TF. There is also a post on external batteries that might help.
hshoem1
By chance do you have a link to the EverReady battery pack? I would like to see it
hshoem1 said:
There are several battery packs used for notebook computers that will work listed on Amazon. Just be sure they have a 12Volt output. EverReady had as battery pack that will also work but you will need an adapter provided by them. The key is that you need an output of 12 to 15 volts to charge the TF or Keyboard. You might read Devcake's post on a DIY charger for the TF as information on the voltages required to charge the TF. There is also a post on external batteries that might help.
hshoem1
Click to expand...
Click to collapse
I have an XP8000 from Energizer, and work perfectly.
w w w.energizerpowerpacks.com/us/products/xp8000/
You will need a conector for Asus (Willy cable WI15) from them. You will have two free tips a year for the life of product
By any chance do you know the tip number?
The cable you note doesn't appear to connect directly to the Transformer.
What setup are you using to connect to the Transformer?
Thanks
steve
The cable it's a Female USB with 16V output. You need the Asus cable.
xp8000
I looked in the web site and it is expensiver than Asus keyboard!
alberteske said:
I looked in the web site and it is expensiver than Asus keyboard!
Click to expand...
Click to collapse
May as well get the keyboard then xD. Thats the whole point of it being a transformer anyways
RojoNinja said:
May as well get the keyboard then xD. Thats the whole point of it being a transformer anyways
Click to expand...
Click to collapse
Or get both, even better
I just saw this while I'm looking for a battery pack.
On a german page I found this interesting:
w w w.intecro.de/XTPower-MP-16000-Powerbank-mobiler-Akku-mit-16000mAh-fuer-Laptop-Handy-iPhone-iPod-iPad-PDA-MP3-Player-mit-20-Adaptern
(can'f find an english page for this product)
Could I use this one by using an adapter?
I just got an Anker Astro3 10000mAh battery pack. I plan to use it while camping this summer, mainly to charge a phone, but occasionally to charge my tablet.
It is intended to charge 5V USB devices, and has two USB ports. It also has a 12 volt port. The adapters for the 12 volt port, of course, do not work with USB or the Transformer. So I made an adapter, and I am good to go now for charging the tablet.
The battery pack charges from a 12 volt wall charger. I have also made an adapter to charge it from the 12 volts on my motorcycle. So I will be charging it from the motorcycle during the day when riding, then using it to charge my devices in the evening at the camp. I've already tried it a couple of times, and it worked well.
I tried to charge the battery pack using a solar panel, but the solar panel was far too wimpy. It was like trying to run a house air conditioner from a penlight battery. It may make you feel good to try it, but it isn't going to do much.
So far so good. This is very close to what I need.
The issues I have had to work around are:
1) I want to also charge an in helmet bluetooth intercom from the USB port. But the charge current is so low, the battery pack auto powers off, thinking nothing is plugged in. Not a big deal because I can plug in my phone at the same time. That keeps it turned on until everything is charged, then it auto shuts down.
2) When I charge the Asus Tablet, it doesn't appear to auto shut down. Just the opposite of #1, it looks like the load stays high enough to never shut down when charging the tablet. This may not really be true, as I have only tried it a couple of times. Also, it isn't good for much more then one and a half charges of the tablet, as expected.
3) You need to figure out your own harness to get the 12 volts to the tablet.
4) No charge cable for a car. I mean this is rated for an input of like 10 to 15 volts, or some such. This thing is GREAT for charging portable devices. Charging it from a car is as simple as a cable, but there isn't one.
Over all this charger is a winner. At right around $55 US, I recommend it, if you can fabricate a plug for charging the Transformer.
Try a 12V UPS type battery along with a 2A fuse and adapters. It only costs about $20 or so. Plan on using only 50% of its capacity and recharge often to get the most life out of it.
Someone posted this product on another post
http://www.sobuying.com/products/Solar-Charger-For-Notebook,-Ipad,-tablet-pc,-Cell-phone,-MP3,-Laptop-11200mAh.html
May suit your needs
NiHaoMike said:
Try a 12V UPS type battery along with a 2A fuse and adapters. It only costs about $20 or so. Plan on using only 50% of its capacity and recharge often to get the most life out of it.
Click to expand...
Click to collapse
For me, this is actually what I use now. But it has issues.
One is simply that it is large. I carry it in the trailer that I tow behind the motorcycle, so it is OK, but a bit too large and heavy. It is a gel cell that has about a 48 WattHr capacity. LiIon has a a lot less and weight. In this case, it has about the same capacity, in a very small light weight package.
The other problem is charging the lead acid battery is an issue. I need to carry a AC charger and find AC when camping. I put a diode/resistor combo in the trailer and tapped off of the taillights. but by the time the weak motorcycle voltage gets to the taillights, add in the diode and other losses, and I'm lucky to see 13 volts at the battery. Not enough to charge it very well. The LiIon pack I use has the supply built in to charge properly from +12.
So I've tossed the lead brick battery (literally) and upgraded to a portable LiIon pack. So far so good.
This is what I use "Portable 12V DC USB 5V Rechargeable Lithium Li-ion Battery Pack for CCTV Camera" search on ebay, you can get one up to 13AH
I got a 3.8AH version for $16 , Dimension: 9.2cm X 6.0cm X 3.0cm
Outout rated 5V (5.8AH) and 12.8V (3.8AH)
small modification because the charger is NON-US wall plug, I just pull the plug pin out and add in a regular power cord cut off from an old appliance
Keep the USB plug for 5V use, cut the 12V DC cable and connect it to a female USB cable (pin 1 and pin 4) , then you can plug in the Asus usb/charge cable directly and charge or power the Asus
...
When ever I drive, I have my phone hooked up to my Escort Red Line radar detector and my car's stereo via bluetooth (both). In order for me to use the radar detector effective, I need to have GPS and Blueooth enabled. This is a HUGE SUPER OMG battery drainer for my amaze. 20 minutes drive kills about 35% of the phone's power. My radar detector offers a slot to charge my phone BUT it still drains, not enough juice flowing in. Someone said it is because it's probably a .5amp.
So I am running a extension from the 12v lighter that's in the trunk to the front of my car. Amazon has a generic 2.1amp for 3 bucks.
http://www.amazon.com/Premium-Heavy...121&sr=8-1&keywords=htc+amaze+car+charger+amp
But on ebay, I found the original HTC car charger for 15 bucks which is a 1amp.
http://www.ebay.com/itm/HTC-Amaze-4...918506?pt=PDA_Accessories&hash=item27c867022a
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
The 2.1 amp is probably 1 amp per port. Although it does not seem to specify.
F9zSlavik said:
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
Click to expand...
Click to collapse
Right!:good:
---------- Post added at 09:23 AM ---------- Previous post was at 08:41 AM ----------
soundping said:
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
Click to expand...
Click to collapse
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Higher voltage will trip a warning window telling you to disconnect and use official HTC equipment.
The phone monitors input voltage to protect the equipment.
nyc_tdi said:
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Click to expand...
Click to collapse
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
I recently got an Amaze and am generally happy with it. The biggest problem I have right now is finding the right car charger for it because the car charger I previously used (a 1A monoprice car charger) doesn't give it enough charge. I have been reading through the forums and some has been saying that if the charger is not working properly, it will recognize it as charging via USB rather than AC. In my case, the phone seems to be reading it as charging through AC, but there still doesn't seem to be enough current going through it. The phone will only charge if NOTHING is going on (i.e. screen's off, no GPS, etc.). I've been using CoPilot GPS and it draws the battery like crazy. Anyone has any idea as to which car charger would work properly with the Amaze such that I'll be able to charge (or at least maintain the charge) while using it as a GPS? Do I need to go up to a 2.1A charger?
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
I couldve sworn we talked about this months ago. Let me see if I can find the thread.
nguyendqh said:
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
Click to expand...
Click to collapse
you won't get the full 2.1a unless you usee a charge only cable or modify the charger as I stated above...
I ended up getting a 2.1A car charger and a USB charge only cable, and it's working perfectly. When I have the screen on full brightness and doing navigation with Co-Pilot GPS, my phone's no longer losing charge and is actually charging. The combo also works with my tablet as well.
blast0id said:
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
Click to expand...
Click to collapse
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Silentbtdeadly said:
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Click to expand...
Click to collapse
I have done this to every single one of my USB car chargers... not a single issue...
So I've been able to test out this nice USB car charger from Choetech Official with Qualcomm 2.0 charging capabilities. And I must say this lil thing works very well. Charged my Nexus 6 up from 15% to 73% around 45min. It's a well built charger that has smart technology for recognizing what kinda devices you have plugged in.
Has a dimmed LED that changes from blue to green when you plug up a fast charge device.
It's a dual USB port charger.
Input: 12-24V
Output 1: 5V 2.4A
Output 2: 5v 2.1A/9V 1.7A/12V 1.3A
I really like this unit. Works better then the crappy one i used to own by Qmadix. That one always seem to stop working after 2 weeks of use.
[Quick Charge 2.0 Car Charger]CHOE 30W (with Most Powerful QC 2.0 Port) Dual USB Car Charger with Micro USB Cable(White) https://www.amazon.com/dp/B00YX7Y3G8/ref=cm_sw_r_other_awd_GxKlwbPTT27F2
PS. the Choetech C0046 does come with nicely built 3ft USB cable.
I received this charger couple weeks ago and have been using it. The charger arrives in a nice package with the standard accessories. Inside it has the charger, the usb cable, instructions manual, and a pamphlet that ask if you're happy with the product or not. Pretty standard nowadays. I got the black charger but they also offer it in white. The charger is shorter than my other ones which is a plus for me. I don't like them to stick out of my car port since it's really close to my shift knob. The charger comes with two usb ports. 1 is for quick charge 2.0 for some phones like my galaxy note 5. The other is a normal port that charges pretty fast too, up to 2.4 amps. You can use either ports to charge your devices and they will charge to the max allowed but if you have a quick charge 2.0 enabled device, it's best to use that port. They colored the port blue for fast recognition which is nice. I don't have to fiddle around with it while I'm driving to figure out which port it is. The quick charge can charge my phone from 50% to close to full in about 45 mins. It takes longer if the phone is being used. I use the charger daily during my drive to school. I always charge it up to 100% before I head to class so it can last me all day. I was worried that by using quick charge so often, it would deteriorate my battery life but I haven't experienced that yet and hope I never do. When I use the charger to charge 2 devices, they both charge at their max. My phone charges with the quick charge while the other phone charges with the other port and it doesn't affect each other, which is very good. I really love this charger. If Iphones had quick charge, I would buy this charger for everyone in my family.
Choetech also was nice enough to allow me to test one of these charger for them.
I found it to be an excellent charger.
I have copied my review from amazon here for the fine folks here at XDA.
I will try to answer any questions you may have, just post up a reply or send me a PM.
--------------------------------------------------------------------------------------------------------------------------------------
This is a great little charger, and I do mean little.
The size actually surprised me a bit considering this is a 4 port charger.
I expected this to be a huge block sticking up from my 12v car port, but it actually is a nice small charger.
I have 2 port chargers that are bigger than this is, enough about that, on to the review.
Looking in the package you will find:
The Choetech 4 port Quick Charge 2.0 certified charger
3' USB cable
Instruction manual
The USB cable is one of the best ones I have received with a charger in a while.
It is not thin and flimsy like you usually get.
The charger itself is made of a nice gloss black plastic and looks and feels like it will hold up well to years of abuse in your vehicle.
This charger does support Qualcom Quick Charge 2.0, meaning that it will auto adjust voltages and amperage to best charge you compatible device as quick as possible.
In testing I found this charger to be able to charge my LG G4 and Samsung Galaxy Note 5 in about the same time as my other Quick Charge 2.0 certified wall chargers.
This will also charger non Quick Charge 2.0 certified devices at the maximum rate they will allow.
I tested my LG G3 that is not Quick Charge 2.0 certified and will max out at 2.1a charge rate.
It got 2.0a charge rate from this charger which is great.
There is also a blue LED on this to help you find it easier in the dark.
The LED itself is dim as to not be distracting,
I have attached some pictures showing how small this charger is and me using it to charge multiple devices including 2 phones and a GPS unit.
I have had zero problems with this unit and am glad to have it.
I would recommend this to anyone with a car or truck and either multiple devices they need to use daily or a device that is Qualcom Quick Charge 2.0 certified.
If this review has helped you at all, please click thanks below to let me know.
I received this at a discount in exchange for an honest review, this does not change my opinion of the product in any way.
Hey guys,
I got to use this charger too. Having 4 ports, one with quick charge was really handy. I was able to charge my Nexus 6, Nexus 9 tablet, and an iPhone 5S all from the same charger without having any drop off in charge rate from any of the devices I could measure with Ampere (Nexus 6 & 9). Overall, there isn't much more to say that the other guys above didn't say.
Other thoughts:
It's really small. This thing packs a lot of power for its size.
It is scratch and finger print prone, but I plan on leaving this in the car all the time; so that doesn't really affect me.
The charging light changes color based upon normal charging (Blue) versus quick charging (Green)
NOTE: I was given a discounted product in return for an honest review. All opinions and statements are my own
I grabbed the 2-port charger at 10 bucks a couple of weeks ago at Android Police.
I wonder why there aren't dual QC 2.0 ones out there.
hiteshonline said:
I grabbed the 2-port charger at 10 bucks a couple of weeks ago at Android Police.
I wonder why there aren't dual QC 2.0 ones out there.
Click to expand...
Click to collapse
probably grabs too much power and the design to make that might be too complicated without having some power fall off? Personally, my phone is the only QC device i'd worry about and the rest could take the slower charging. But that's my 2 cents.
I have this charger, too, along with a number of other CHOETECH products. Their quality is top notch with affordable pricing!
I have this charger in white so it sticks out surrounded by all the black leather in my car, but that makes it easy to spot and I keep the white charging cable in the quick charge slot so I know which to use when my phone is low. It doesn't seem to charge fast while the phone is in use, but it does charge quickly if you just leave your phone idle and let the charger work its magic.
Even you didn't have a quick charge device, it's handy to have a two port charger. I'm happy with that product.
Sent from my LG-H811 using Tapatalk
Choetech 3 coil fast charger
http://amzn.com/B017U9FVKW $36.00
Fast Charge 2.0 AC Adapter (needed for our S7 because OEM S7 AC Adapter will NOT work!!)
http://amzn.com/B00X4U1KD4 $9.00
The 3 coil plate is incredibly convenient to charge and is much more forgiving for a good connect for the wireless charging to begin. I have a Ringke case and also read even the Otter cases are no challenge for a contact point since it has 3 coils to choose from. The Quick charge 2.0 ac adapter was one of the cheapest that were also Qualcomm 2.0 certified. You don't need a 3.0 because our S7's are only 2.0 compliant. Don't waste money buying a Quick Charge adapter that is 3.0 or over $10.
For me this has worked really well with my case and I can charge fully in what I would guess 2.5 hours. I usually just casually have it charging well before the battery is low so I can't really tell you except I did get a full charge around 2 hrs before which for a wireless Qi really is a fast charge compared to the old 0.5 amp output days.
Take my advice for what it is and let me spare you the hour of research in comparing hardware and learning about what Qualcomm Quick Charge 2.0 is and why our S7s don't even need the 3.0 version.
I might go for a substantially more expensive three-coil wireless charging pad, if it were my only one. But the convenience of wireless charging is so great, that I have one near my bed, one at work, one in my home office, and one in the kitchen. Two coils are good enough for me. Most of the time I get my S7 placed on the first try.
FWIW, I think fast wireless charging pads have become commodity items. I have both Choetech and Pleson, and would buy on price.
Can you tell me what rate you get?
https://play.google.com/store/apps/details?id=com.gombosdev.ampere
I have a cheapo wireless and get between 300 and 550 mah
Got this one too, I do like it.
Battery monitor tells me it's just over 700mA, but it's during nights, when sleep tracking is active too.
i have the car remote charger too, but that one can barely keep up while driving with Waze (screen always in night colors, low intensity)
btw: temperature rises to 41 degrees celcius.
Bright.Light said:
Got this one too, I do like it.
Battery monitor tells me it's just over 700mA, but it's during nights, when sleep tracking is active too.
i have the car remote charger too, but that one can barely keep up while driving with Waze (screen always in night colors, low intensity)
btw: temperature rises to 41 degrees celcius.
Click to expand...
Click to collapse
Yeah.... I've noticed this as well, unfortunately it only "fast charges" with the screen off. With the screen on you get around 200-300mA. For me, 200-300mA is not good enough and I lose probably 1% every half hour driving. I have however noticed that if the phone is at 95% it will pull more current from the wireless charger and will stay at 100%.