Hi guys,
Yesterday I updated my SGS2 to 2.3.5.
Since the update I have a problem with my sound.
If I set vibrate on 'always', there's no problem with the sound of incoming calls, and everything is fine and dandy. But putting vibrate on 'always' puts the vibrate icon in my statusbar. That makes the bar a bit too crowded for my taste.
That's why I normally have vibrate set on 'only in silent mode'.
But if I set the vibrate option on anything other than 'always' (for example 'only in silent mode'), incoming calls make no sound at all.
I've tried looking for an earlier thread, but found nothing concerning this problem.
Does anyone know what to do?
Related
Rooted for the first time yesterday and flashed DasBamf Sense 3.0 RC4. My only issue is that when I set my sound profile to vibrate mode, none of my messages (or notifications, for that matter) vibrate on incoming, even though the "Vibration feedback for calls and notifications" box is checked.
Anybody else have issues with this?
Thanks
I tried it on mine. I don't normally use vibrate. When I set the sound profile to vibrate and sent myself a txt it didn't vibrate. I had to go into the message app and go into settings and turn on vibrate there also. Then it worked. I know calls vibrate when sound profile is set to vibrate but other notifications have to be set separately.
sent from my BAMF'n thunderbolt.
Hi
I'm using SG2 on KF3 india stock firmware
I noticed a weird bug,
When vibration is set to always on mode, and Motion controls (Turn over) are set to On, when the phone is place on flat surface like sofa,bed,pillow or anyother flat surface,there is no sound or vibration for incoming call and messages.
if at all that comes,vibration or sound is coming only for 1-2 sec,then phone goes to silent
This happeing with Vibration only in silent mode also, once in a while its completely vibrating ,other wise phone vibrating for two times then going to silent mode
When Turn Over setting in Motion is disabled,then its completely fine,
is this normal with Turn Over feature, If yes, then i'm done with motion controls
Its so annoying for me,as i need vibration always,coz when phone is trouser pocket,ringtone is not audible,so i need vibration to know for sms and incoming calls, in this case,when phone is on sofa or bed,i'm completely blindfolded about my calls and sms as there is no ringtone
anyway to get this over?
Any one else faced this issue?
No, I do not have this problem.
I have also both turned on - vibration and motion controls.
Do you have tested the turn over in settings - motion controls - turn over?
And do you already tried to calibrate sensors?
In settings - display - horizontal calibration and gyro-sensor calibration.
If this does not help, you really should set priority and use silent mode.
Same here
I've the same issue..
Im on xxkh3 right now. I've tried calibrating and also Ive tested several different versions of firmware. Nothing changed.
It's quite annoying, knowing that only some of us have this, makes it worse. Maybe it is a hadrware defect??
Edit : BTW, there is already a thread for this :
http://forum.xda-developers.com/showthread.php?t=1162488
I have a very simple profile set up to put my phone in silent mode during certain days and times. The profile is being executed as expected. I can go into Sound menu on the phone and see that the phone was put into silent mode. However, the silent and vibrate icons are not displayed in the notification bar. Even more troublesome, is that the phone wont actually vibrate when I get a call or notification. If I manually deselect and select silent, I will see both icons and the phone functions as expected. Is there perhaps some bug in Tasker that is not handling this correctly?
My phone is the Samsung Galaxy S2, rooted running Unnamed rom.
BUMP....sorry to bump this but was wondering if anyone has experienced this issue?
More information: I downloaded Sound Manager which is an app that shows the status of the various volume & vibrate settings. After Tasker has executed the profile to put my phone into silent mode, I used Sound Manager to doublecheck my vibrate status, and both calls and notifications are set to not vibrate at all even though in my phone settings I have vibrate on silent. When I change the call and notification vibrate settings in Sound Manager to vibrate on silent as well, I see the appropriate icons . This tells me that Tasker is doing something wrong when setting my phone to silent.
Any ideas?
I am having a similar problem
I set the "silent mode" to "vibrate" (in tasker) but I get an icon of silent instead of vibrate.
Same problem here, tasker puts phone in silent mode bud doesn't enable vibration (manually setting silent mode in statussbar works fine) looks like tasker bug to me.
Galaxy s2
Rom: KI4 rooted
EDIT:
HA! Found it! Silent Mode in tasker doesn't have 2 modes (ON and OFF). Instead it has 3 (on, VIBRATE, off). Set it to VIBRATE and you ar back in bussiness
Checked it - works. If others confirm we can mark this one solved
I have a very similar issue. I have a profile that is triggered when I am near two cell towers at my work. The actions put the Phone Ringer to volume 0 and enable vibrate, and I see the vibrate icon in the notification tray, but I've tested calling myself from my office phone, and the phone still rings at normal volume.
I'm using an LG G3, rooted and running stock ROM, Android 5.
similar issue for meI have a profile that activates when my phone sees the wifi at work will set the phone to silent mode (3 – vibrate). It works fine when I first get in as it will vibrate, but then after some unknown amount of time it will set the ringer back to wherever it was (like it exits the profile) but the profile is still active in tasker. If I manually reexecute the profile it will stay in vibrate the rest of the day. Ideas?
Does anyone else have the problem that if you have a text tone, email tone & phone ringtone, then try and Mute or put in Vibrate mode the S3, it only mutes the ringtone, both text messages and emails are still heard. Just found that out while in a meeting
Never experienced this before, any ideas?
boohoo2u said:
Does anyone else have the problem that if you have a text tone, email tone & phone ringtone, then try and Mute or put in Vibrate mode the S3, it only mutes the ringtone, both text messages and emails are still heard. Just found that out while in a meeting
Never experienced this before, any ideas?
Click to expand...
Click to collapse
No, this doesn't happen to me.. if I put the phone on silent everything goes silent.
Then if you open the volume control settings you can see that the icon for notification is crossed out to indicate silent.
Are you on a custom ROM? And how are you enabling silent mode?
Sent from my GT-I9300 using XDA
I'm on Vodafone stock rom, I use the notification menu and selected Mute or Vibrate and text/email tones come through. I've even turned off the sound using the volume buttons, but these tones are still coming through.
When you go to volume settings do you are the icons crossed out when in silent mode?
Sent from my GT-I9300 using XDA
I get either the icon mute or icon vibrate mode set in the notification bar area. I think I may end up trying a full reset and installing apps one at a time just in case one is conflicting.
One thing I have noticed is that if I use the volume rocker and turn it to mute, if you click the settings on the right of it, it shows all 3 volume settings and I think this is where it's not muting the other notifications
Hi,
First time poster and I registered just to see if I can get this question answered. My issue is that I really hate that when I change from sound to mute via the vibrate icon in the pull-down taskbar that it actually vibrates. I also hate that it vibrates when I push the volume putton down towards mute.
If im lying in bed with the Mrs and not wanting to wake her while I browse my phone i want to be able to go from sound to mute and when passing through vibrate that it actually doesnt vibrate (I dont need to be told im on that setting). There is an app called mute to do this but I wish I could disable the vibrate when changing profiles entirely. The icon tells me whether it is on vibrate or not without needing to vibrate to tell me I have moved onto the vibrate setting!! Same goes for during a meeting when I am toggling one way or the other i want to do it without making a noise. I know I could use the power button to go to silent mode but I prefer to use the dropdown menu.
With my iPhone I could have just changed a text file or something but I guess its different with android?
So essentially I only want my phone to vibrate when I am getting an alert like a call, text message, calendar alert etc and not when Im cycling through my sound profiles. Maybe Im weird and this doesnt bother anybody else but it would be great to hear if this is possible to hack?
Thanks
David