I'm looking for a screen protector with anti-glare if possible, what is the best one to buy?
Was going to suggest Skinomi, then saw you need anti glare. I never found one I liked with "ant glare", and I don't know of any for the View/Flyer. Sorry =/
If anti-glare becomes too difficult to find, then I highly suggest the Skinomi. I have it on 3 of my tablets currently, and have tried multiple different companies protectors including whatever Sprint sells, BestSkinEver, Zagg, Bodyguardz and a bunch of generic ebay screen protectors. After trying all the other brands, the Skinomi is my favorite and all I'll use on any touchscreen device now.
Don't know about "best", but I quite like the Skinomi (wet apply) protector on my Flyer as well.
http://www.skinomi.com/htcflp.html
I have Bodyguardz on my phone, which is also a good protector. They didn't make protectors for the Flyer, when the tablet when the first came out (why I decided to try Skinomi) but now they do. They have anti-glare, but its backordered:
http://www.bodyguardz.com/screenguardz-htc-evo-view-4g-htc-flyer-protection-cases-screen-protectors-covers-shields-skins-films.html?dir=asc&order=sort_priority
I use this one
http://shop.brando.com/brando-works...otector-htc-flyer-p510e-_p05871c1315d039.html
You're ordering from Hong Kong, so it takes a while, and the credit card hassle with overseas orders. But really high quality.
I am currently using this one from Amazon. The only thing is you have to use a hole punch to create the hole for the front camera. Other than that, it is a great screen protector that is matte.
Forum wont let me post links yet, so search for Great Shield Ultra Anti Glare screen protector for HTC Flyer.
Official htc screen protectors are £5 ($8) on amazon uk, they're great.
Any of these work better with the pen?
It's not anti-glare, but I have this screen protector, and it's fantastic. Perfect size with cut outs where they're needed. Very easy to apply as well. I use the Scribe daily, and this screen protector works great with it.
GreatShield Ultra Smooth Clear Screen Protector Film for HTC Flyer / Sprint EVO View 4G
I tried an anti-glare screen protector when I first received my View, but the graininess was much too distracting for what I primarily use it for - reading. On phones, I generally don't have a problem with the graininess that anti-glare screen protectors add. But that's probably because I'm not staring at my phone and reading for hours at a time. The size difference in the screen also makes it more pronounced. I'll put up with having to wipe finger prints off and making adjustments to avoid glare to have a better overall experience. This is the anti-glare screen protector that I used - HHI HTC EVO View 4G Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector. It did the job quite well, but it just wasn't for me on a screen this size.
I'm considering buying an anti-glare one for my Flyer because I'm getting tired of adjusting the angle when working on my tablet.
I was wondering how the stylus works on these anti-glare screen protectors? The one I have on now (simple screen protector) gets scratched easily when using the stylus.
Are these behaving better?
Anti Glare, expensive but from a good company... http://www.boxwave.com/htc-flyer-screen-protectors/htc-flyer-cleartouch-anti-glare/bwpdd/f-ztwp/
geojoking said:
I'm considering buying an anti-glare one for my Flyer because I'm getting tired of adjusting the angle when working on my tablet.
I was wondering how the stylus works on these anti-glare screen protectors? The one I have on now (simple screen protector) gets scratched easily when using the stylus.
Are these behaving better?
Click to expand...
Click to collapse
I've had this clear screen protector applied since late December. I use the tablet with the Scribe daily, and I have yet to get a single scratch on it.
When I used this anti-glare screen protector, the Scribe never left a scratch either. The Scribe worked fine with it, but since the screen protector was somewhat thicker than a clear one (which seems to be the norm with anti-glare screen protectors in my experience), I did experience some issues with it not always registering and a loss in precision at time. But it wasn't anything that was terribly noticeable most of the time. I Haven't had any problems with the clear GreatSheild in the that department.
Thank you for your answer.
Surely the screen protector I have on right now is of lower quality and I'll have to change is ASAP. I'll just have to decide between a clear or anti-glare one. But since the viewing angle and outside readability are still issues for me, I think I'll go for the anti-glare one.
Related
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
I've been looking at some reviews including a very lengthy one from a couple of years back on Youtube where he tried about NINE different brands (Including anti-glare or crystal from the same manufacturers) and he tried pretty much most of the known brands including Zagg. He did miss out Martin Fields and a few others though.
I've seen the XO skins are pretty easy to apply wet. Much easier than the Zagg.
XO aplication.
http://www.youtube.com/watch?v=-Td0vTcKMME&feature=related
Brief thumbs up from someone.
http://www.youtube.com/watch?v=VJGJKH8BGz0
XO skin for TF
http://xoskins.com/laptops-tablet-r...ors/asus-eee-pad-transformer-screen-protector
Large shooutout of various screen protectors. But it's a couple of years old and for a tablet PC rather than pads.
http://www.youtube.com/user/tonkabui#p/u/0/9XdVHL1M7vM
I am going to continue looking. But if anyone finds the perfect screen protector let me know. That XO looks easy to apply. But I want anti-glare and anti-reflectin as well as anti-smudge and 0 bubbles (in other words eacy to apply). Protection from scratches is actually pretty low down my list of wants.
If anyone can post their experiences (good or bad) of various screen protectors please do so here. I noticed there is a reasonably priced TF1010 anti-glare protector made by Posr.us and has two five star reviews on Amazon. Also someone called MFX is making one as well as Martin Fields and SGP Steinheil.
Thanks I needed one still and this looked decent and easy to apply (I prefer the wet application) I bought it and used coupon code "retailmenotxo" for 15% off ... it covered more than the shipping so that was cool.
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
well my screen has a scratch only had it a week
rgalarza75 said:
I put on Skinomi on my beloved transformer. yeah it's a wet app, and I'm not yet skilled in it's application yet, but certainly feel much safer with it on than not - even despite the alleged "scratch resisteance of Gorilla Glass"
Click to expand...
Click to collapse
Well, scratch resistant =/= scratch proof, so all those people who say Gorilla Glass is the reason why you shouldn't need a screen protector are fooling themselves. I personally have a clearfreak protector on my transformer. It definitely makes me feel more at ease when I use it.
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
I picked up a dcmugen antiglare from ebay and I love it. Damp or dry install, the type with the two peel off layers, and repositionable to boot. It ships from Asia, and mine came with a slight crease causing bubbles that cant be flattened. I've requested a replacement, waiting to see if they follow through. So much easy to use indoor and out, and far fewer fingerprints to clean off.
Sent from my Transformer TF101 using XDA Premium App
Got a zagg at bestbuy today because I was bored more or less. Installation went well even though the thing stuck to itself. But a few hours later and I'm bubble and wrinkle free nd protected. Now to decide if I want a spg crytal or not....
mybikegoes200 said:
I bought two of the (as far as I can tell) unbranded screen protectors from ElectronicCrap.com. Other than the non-existent directions, I'm quite happy. Not terrible with the fingerprints, reduces the glare, feels and appears quite durable. Price seems a tad steep (given that you can get whole packages of universal ones for like $10) but these fit perfectly edge-to-edge with the cutout for both the light sensor and the camera. It didn't come with directions of any kind but it's a screen protector - it isn't rocket science. I'd say overall it's a keeper.
Click to expand...
Click to collapse
I bought one as well, but it looked like crap on mine. Hen again im terrible at applying these things. I usually let Verizon put screen protectors on my phone.
Has anyone tried the skin protector from PhantomSkinz? I have their carbon fiber back skin and it looks great and is durable
Sent from my DROID X2 using XDA App
My experience with Zagg has been mixed with all my devices but their customer support is good. If you get a bad protector(line down middle, or little imperfections) they will send you another.
The XO skin looked very promising, and for $10 cheaper I thought I would give it a shot. Just placed an order for the XO skin.
Use discount code retailmenotxo for $3 off(free shipping pretty much)
Pulled the trigger on an XO
after watching all the youtube reviews, i decided that the XO looked best.
ordered one this morning.
just a thanks to all the folks responsible for putting the links and testing together in one place for time-challenged guys like me.
btw, i think the transformer is one of the smartest purchases i've made in the last few years. i'm thoroughly enjoying it.
marvin
Following up on my earlier post. Installed the XO skin in my university's clean room(0 dust, yes I wore the cleanroom suit) and it has streaks. The protector quality is very good but once you put it on there are visible streaks all over. I kept the applicator wet so there would not be "burn marks" as specified by the instructions.
Going to ask for a refund... maybe I'll give Zagg another try. My first ZuneHD protector was wonderful but the 2nd one I got had a big line down it(bad QC).
The perfect screen protector
I always have problems applying the screen protectors to any of my devices, so I did some research and decided to go with one made by a company called Aurum. The deciding factor was that it had a large cut out for my camera so its easier to apply. Overall, I am very happy. I got the two pack in case I messed up the first one.
http://www.amazon.com/Asus-Eee-Pad-...4?ie=UTF8&s=electronics&qid=1308242480&sr=1-4
I dont think I will ever buy the wet applicator types again, the dry is just simpler and gives me choices in whether I want a clear or the anti-glare. Hope this helps
Here is the link to the anti-glare offered by Aurum in case anyone is interested: http://www.amazon.com/Transformer-M...1?s=electronics&ie=UTF8&qid=1311083745&sr=1-1
I usually get Bodyguardz for all my gadgets (mostly phones). It just feels better than Zagg's invisible shield and other screen protectors.
Anyone tried using Bodyguardz? I'm thinking about getting either the full body protector or just the screen protector. Hmmm this is tough.
Following up... after 24 hours drying/curing it looks much more acceptable. The funny part is there is a tiny black spec under the protector. I don't know how it got there since I was in a cleanroom!
Found this one in Amazon, similar to the Aurum with anti-glare.
Anyone has used this ? Is this any good ?
HandHelditems - Anti-Fingerprint, Anti-Glare, Matte Finishing Screen Protector (3 Pack) (Free HandHelditems Sketch Universal Stylus Pen)
http://www.amazon.com/gp/product/B0056K5D0G/ref=ox_sc_act_title_2?ie=UTF8&m=A1NOY9EOR8TXD6
Hmmm... I have previously considered to buy it too, but I've seen the Gorilla Glas Test with the Transformer in a YouTube video... you dont need a screen protector
I just got a screen protector from Photodon. Their MXA film is great. It was a bit of work to put it on with no dust and correctly aligned. But once it's on it looks pretty good. It's got a glossy finish, so it looks just like the original screen. You can hardly tell that there is a screen protector on the transformer. It is pricey at almost $20.00 each, ut the screen is still sharp and crystal clear with none of the haze that a lot of cheap screen protectors have.
xxx.photodon.com/p/MXA-5445-01.html
I used to have Bodyguards for my HTC Touch Pro and it peeled after three months both times that I used them. Now I use Phantom Skinz and I get no orange peel effect and I've had one on my HTC Evo 4G for almost 1 1/2 years with no peeling and no orange peel effect. Smooth as glass and you can't even tell it's on there.
Now I have Phantom Skinz screen protector on my TF and Phantom Skinz Chromatics white carbon skin for the back side. Very nice to say the least.
I would highly recommend a screen protector for the TF because although it has Cornings Gorilla glass, it sux for finger prints and fingerprints are easier to wipe off of a sceen protector than the Gorilla glass.
im using the steinheil Ultra Crystal. also use it on my phone.
I am mainly concerned about fingerprints and smoothness of the operation. Clarity is an important factor also so appears matte finish isn't what I'm looking for since you have that moire over text and such. What would be the optimal screen protector?
Skinomi. Awesome and very easy to apply. They also have the best customer service support!
I actually messed up while applying my screen protector and they sent me a new kit within 2 business days.
Where to get it: Amazon, nuff said.
Thanks for the tip. I think I'm going to try something cheapo like this just so my mother can see if she can live with a matte finish for about a week.
http://www.amazon.com/Anti-Glare-Sc...sformer/dp/tech-data/B005OUE8R2/ref=de_a_smtd
If she finds she can I will find a good high product one.. if not I will go straight with Skinomi most likely than. But I think buying a cheap matte one so she can experience and anti-glare, anti-fingerprint (most critical is fingerprint reduction) than she can make an intelligent decision without blowing $15 just to find she does not like it.
I tried the Zagg and it was a disaster. Application was messy and I personally didn't like the grippy feel. I just got my BodyGuardz put on a couple days ago though and I love it. I bought the combo carbon fiber skin/HD anti-glare screen protector and it's fantastic. Nice feel and definitely cuts down on glare and fingerprints.
Also, if you find them on facebook and post "BodyGuardz Me!" on their wall, they'll send you a 30% off coupon code.
Skinomi
Skinomi wet-apply screen protectors are pretty easy to apply, however they are grippy (like the Zagg's) and 'soft' as in an your fingernail can easily and accidentally leave an indent on the screen protector. It feels almost too soft, where things that leave an indent on the screen protector would never even damage the Gorilla Glass underneath.
Good thing is because it is soft like rubber, most indents un-indent themselves after a while.
Screen Protector
got my screen protector for my Asus Eee Pad made by http://secondshells.com/screen-prot...n-protector-anti-glare-anti-finger-print.html I ordered the anti-glare screen protectors through SecondShells. I have used simply because the touch screen did not lose any sensitivity after I applied it.
The protector had a nice rectangular notch cutout for the camera and for the light sensor(I think that's what it is), I had purchased other protectors and they had these small circular holes, you had to be perfect to install it right, this larger opening made my life a lot easier. Overall very easy to apply, a peel and stick type of protector, with protective covers.. I am very happy. I also recommend getting a stylus like the nano fiber stylus I also ordered from SecondShells responds great with my tablet. http://secondshells.com/touch-stylu...n-with-nano-fabric-retractable-tip-black.html
The Skinomi is nice. Just installed it today. It doesn't reduce glare but the touch is nice. I only wish it were oleophobic...
Sent from my Transformer Prime TF201 using XDA Premium HD app
I installed the Ghost Armor clear front an back on mine and love it. It is a little bit grippy, but no where near as bad as Zagg, which I can't stand!! Ordered mine direct from them for less than $35 shipped. Install is your standard wet install which is super easy in my opinion. Clarity is great and does NOT have the orange peel look like Zagg does. The full body kit comes with front, back, and even pieces to cover the sides. True full body protection!!! They offer many different colors for the back including carbon fiber. http://www.ghost-armor.com/Asus/743.html
I've never been able to get the wet app to work successfully. That's why I chose the dry application secondshells offers.
Have had the TF300 for about a week and just cannot stand the fingerprints and worries about scratches. I'm used to Gorilla Glass and this is driving me nuts. I've been researching screen protectors quite a bit and cannot seem to get a consensus on a certain brand. I know the selection for the TF300 right now is slim, but given what you've used on earlier devices, what is a good brand to go with?
I have it in a case (Caseen Designo), but would like an extra layer of protection.
I've had good experiences with SGP's Steinheil screen protectors. I've used both the clear ones as well as the matte glare reduction/smudge resistant models and have been happy with both. The usual reduction in clarity is in the matte protector, but the cut was very precise and it lasted me a year before i took it off because i missed the crisp picture of the IPS panel, the protector was still pristine.
I just keep a microfiber and a small credit card style sprayer with 50/50 alcohol and water mix in the bag that i keep the tablet in, and its been alright so far, if you keep it in the dock most of the time you shouldn't have to worry about it being scratched unless you drop it or something, which i have yet to do since i also have a skinomi techskin on the back so its nice and grippy.
SGP doesn't make a protector for the TF300 yet, but i'd keep an eye on it, they make some solid products.
screen size is same as prime so protectors made for the prime should work.
johnjohnjohnson said:
screen size is same as prime so protectors made for the prime should work.
Click to expand...
Click to collapse
You may want to check camera and light sensor placement before you put a prime screen protector on. They may be the same but it never hurts to check
Nothing else will work with the TF300 unfortunately.
I've been researching like crazy and think I've narrowed it down to:
Zagg
Stenheil
XtremeGuard
Those seem to get the best reviews. I'm really looking for:
same feeling as naked screen
optimal clarity
mitigates fingerprints
If you've never felt a zagg's wet apply film before i suggest you find someone who's got something similar to it and try it first, i see one of the criteria is feel close to naked screen, zagg and other wet apply soft skins usually feel grippy when you first install it, and gradually over time will wear out and feel smoother. In general there are the wet apply films which feel a bit like vinyl except its clear, or the dry apply protectors which are harder pieces of plastic, those will feel closer but nothing will be quite like a naked screen.
Is there big difference on screen sensitive between glossy and matte screen protector? or just you see difference of screen quality...
Thanks
I almost wonder if I might just be better off with a naked screen. I have my TF300 in a Caseen leather case and am always very careful when it's in use. The only thing I'd like to mitigate is the fingerprints.
Wait for a ClearCoat screen protector....i have tried every other brand and there is NOTHING like them. Super thin, no spongey feeling or orange peel....
I bought the xtremeguard one on ebay for 8.99 It fits great. The one I got isn't anti-glare though. One thing that kind bothers me, since I have never used a screen protection before, is that my fingers don't glide as easily as in the glass, it shows a bit of resistance. But I guess I just got to get used to that. I have not seen a reduction in screen sensitivity as of yet, but my dagi stylus kinda sucks now with the screen protector T_T since its plastic on plastic the resistance is really bad.
I like my skinomi. it takes forever to apply since it's wet application and if you're OCD about bubbles/lint like me. But once you've got it on there perfect and wait for it to dry and clear up it's not bad at all +lifetime guarantee.
I've always liked wet applications over the adhesive/static stuff just because they last a long time, and I havent noticed the yellowing people have talked about on any of my devices, I agree about the stylus issue, though (jot pro)
+1 for skinomi...
I used to swear by Zagg ...
Skinomi has only a slight orange peel effect and is generally smother except I agree it is still a nogo for the Jot pro as it doesn't let the plastic disk glide
after a while the Zagg invisible skins would start to keep my finger from sliding properly...
Skinomi skins do not have this issue and they dont show finger smudges very much
I want to try the Zagg HD skins as they are supposed to be glass smooth but they seem to only be out for iProducts and the kindle fire.....
rj7766 said:
+1 for skinomi...
I used to swear by Zagg ...
Skinomi has only a slight orange peel effect and is generally smother except I agree it is still a nogo for the Jot pro as it doesn't let the plastic disk glide
after a while the Zagg invisible skins would start to keep my finger from sliding properly...
Skinomi skins do not have this issue and they dont show finger smudges very much
I want to try the Zagg HD skins as they are supposed to be glass smooth but they seem to only be out for iProducts and the kindle fire.....
Click to expand...
Click to collapse
It would be cool if the Zagg HD worked with plastic disk styluses
aelunyu said:
I like my skinomi. it takes forever to apply since it's wet application and if you're OCD about bubbles/lint like me. But once you've got it on there perfect and wait for it to dry and clear up it's not bad at all +lifetime guarantee.
I've always liked wet applications over the adhesive/static stuff just because they last a long time, and I havent noticed the yellowing people have talked about on any of my devices, I agree about the stylus issue, though (jot pro)
Click to expand...
Click to collapse
the lifetime warrenty requires you to pay for shipping and handling by paying for the shipping and they also ask that you put your cc# on a paper and send it in. kinda risky there.
mrevankyle said:
You may want to check camera and light sensor placement before you put a prime screen protector on. They may be the same but it never hurts to check
Click to expand...
Click to collapse
just got the bestskinsever protector for the prime and size is the same and cut out for camera is in the right spot. should be good to go on other protectors made for prime.
jgaf said:
I bought the xtremeguard one on ebay for 8.99 It fits great. The one I got isn't anti-glare though. One thing that kind bothers me, since I have never used a screen protection before, is that my fingers don't glide as easily as in the glass, it shows a bit of resistance. But I guess I just got to get used to that. I have not seen a reduction in screen sensitivity as of yet, but my dagi stylus kinda sucks now with the screen protector T_T since its plastic on plastic the resistance is really bad.
Click to expand...
Click to collapse
This will pass eventually from wear, on my zune hd i used to have an invisible shield which is a similiar kind of wet apply soft protector, and eventually the center part wore down enough to where it was like a hard plastic protector.
You bring up a good point though that i forgot to mention, i've used matte hard protectors, clear hard protectors, and soft wet apply films and my adonit jot still works best on a naked screen, though the matte hard protector had more of a paper resistance to it and the clear and naked both were much smoother.
Szpaner: the touchscreen sensitivity for me was largely the same between a clear hard protector and matte hard protector, i wasn't able to glide as well with the wet apply film so i wasn't able to gauge properly how sensitive it was compared to the other two.
mfratella: a light coat of rain-x on the naked screen helps make it much easier to wipe clean, i can breathe on it once or twice and the condensation is good enough to clear the whole screen. Even with the matte hard protectors which are supposed to be designed to be anti-fingerprint, they will still show up eventually from the oils in your finger, those spots will end up being a little more transparent so you'd have to wipe anyway, though in my experience the matte ones are the easiest to wipe, i used to just use my sleeve and give it a once over and it was all clean.
szpaner6 said:
Is there big difference on screen sensitive between glossy and matte screen protector? or just you see difference of screen quality...
Thanks
Click to expand...
Click to collapse
When I've used a matte screen protector, I didn't notice any difference in screen sensitivity. The biggest difference is in the clarity of the screen. On a phone, I can deal with the graininess that a matte screen protector brings with it. But on a tablet with a large screen, something that I'm going to use for long periods of reading, it's far too distracting for me. Personally, I'd rather work around glare now and then along with wiping off finger prints in exchange for a clearer screen.
Screen protectors compatible with dock?
The Armorsuit people replayed on an email I sent them asking if their screen protector was compatible with the keyboard for the TF300.. it appears it is not. They answered me just to be careful... so I was planing on cuting it. these screen protector is actually pretty good, and I think that I wont even notice the protector end-line at the bottom of the screen after a while. Do you know if cutting it actually works?
I just installed the Skinomi on mine. Took about 5 minutes and it's perfect. Just gotta makes sure you soak the hell out of the screen (you won't damage it) and both sides of the protector plus your hands so that you don't leave finger prints on the adheasive. If you have enough of the solution on everything it should kinda float on the surface of the tablet. You can just very easily slide it around until it is center and then start pushing the water out to make it stick. I didn't have one bubble on mine when completed.
The Zagg is now avail at best buy . No issues with the stylus either. Now all i need is a case im comfortable with.
I have used the Stenheil Ultra Crystal or Ultra Oleophobic from spigen / SGP on like my last 10 devices, because, they are by far and above the best I've ever used, hands down, in every way.
But for some reason, they decided not to make one for the DNA. My guess is the curved edge of the glass, they had issues with the curved glass on the Galaxy Nexus too since these protectors are "rigid". I don't care if it can't cover the entire glass as it's still better than nothing...
Anyone come across a screen protector that is like the Ultra Crystal for the DNA? IE - no orange peel, no gummy feel, no change in the picture quality, etc. IE - NOT a Zagg style protector, lol. Thanks in advance.
Have you ever tried 'best skins ever'? I use them on all my device. If you are generous with the solution the orange peel is so minor it's hard to see. I've actually used them so much I can get them on with no orange peel. They feel almost like the glass when placed correctly.
zhp pilot said:
Have you ever tried 'best skins ever'? I use them on all my device. If you are generous with the solution the orange peel is so minor it's hard to see. I've actually used them so much I can get them on with no orange peel. They feel almost like the glass when placed correctly.
Click to expand...
Click to collapse
Yeah, that's a zagg invisible shield style. It's a protective material, not a good screen protector material. I'm looking for a rigid, dry install type protector. That type has NO orange peel and feels just like glass.
I used to use boxwave back in the day, they were nearly as good as Steinheil's. But it seems they stopped making protectors for all but the absolute most popular devices.
I'm probably going to order one (Steinheil Ultra Crystal) for the HTC One and just it it, it won't cover all the glass but it will the visible area at least. I confirmed this on my friends One.
Have you considered tempered glass screen protectors? There appears to be one offered by iMUSE. It should offer the best clarity, but it cost $30. I haven't purchased one myself because there aren't any reviews to be found for this screen protector.