Possibly fixed screen on problem - AT&T Samsung Galaxy S II SGH-I777

So far after four hours of deleting a system at the screen has not come on. The system app is called the Samsung service mode. Not sure if this is going to cause any other issues but I will continue monitoring and report back with my findings it's not guaranteed to work though.

Reserved just in case ha ha
Sent from my GT-I9100 using Tapatalk

When i first flashed the ics Rom xxlpq the bug did not occur until rebooting. Try that
Sent from my GT-I9100 using Tapatalk

MysticKing32 said:
When i first flashed the ics Rom xxlpq the bug did not occur until rebooting. Try that
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I need the new kernel I love working keys
Sent from my SGH-I777 using Tapatalk

It came on :/
Sent from my SGH-I777 using Tapatalk

Related

[Q] Can anyone port SensatioN ROM 3.4 ICS by Crysis21

Can anyone port the SensatioN ROM 3.4 ICS by Crysis21 over in Orginal S2 forum so ATT S II can use it? It looks really good.
Thanks
Why can't you?
#fail
Idk what to do. Hellrasing it? Never done it before, I dont want to risk it
kvl19 said:
Idk what to do. Hellrasing it? Never done it before, I dont want to risk it
Click to expand...
Click to collapse
Too bad, if you want it done, then you have to learn. It's a painless process. You can't tell me that you're that afraid otherwise you shouldn't be modding phones.
ok, I'll try
kvl19 said:
ok, I'll try
Click to expand...
Click to collapse
you're literally flashing one more package than you usually do but without rebooting in between
That's the spirit of XDA brotha. Learning and growing
Sent from my SGH-I777 using xda premium
Tried this with every kernel home button never works
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
weedolo9y said:
Tried this with every kernel home button never works
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
you sure you did it correctly?
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Nick281051 said:
you sure you did it correctly?
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Yes I've hellraised lots of other roms with no problem... Anyone get the home button to work?
Sent from my SGH-I777 using Xparent ICS Blue Tapatalk 2
It's probably because It's based off of xxlp7 (not xwlp7 which is newer) which is an old firmware base. I'm pretty sure hellraise thread said wouldn't work with.
Sent from my SGH-I777 using Tapatalk 2

Lost ICS keyboard. Help please.

Ok, I flashed hellfire 1.1 and the stock ICS keyboard disappeared. I wiped and switched to blazer. No ICS keyboard still, wiped again flashed rooted stock Rom, still no luck. Anyone have sadly suggestions how to get it back without going to the ICS port on the market?
Sent from my SPH-L710 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1748356
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Saw that one, and I thank you for the link,but I was hoping to restore the stock keyboard to the Rom
Sent from my SPH-L710 using Tapatalk 2
HelgesenJ said:
Saw that one, and I thank you for the link,but I was hoping to restore the stock keyboard to the Rom
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Gotcha, How about this one then?
http://forum.xda-developers.com/showpost.php?p=28707447&postcount=3
posthold said:
Gotcha, How about this one then?
http://forum.xda-developers.com/showpost.php?p=28707447&postcount=3
Click to expand...
Click to collapse
Worked like a charm! Thanks!
Sent from my SPH-L710 using Tapatalk 2

Black screen on JB games?

Hi all, I'm using the latest JB leak and I have noticed that some games end up causing the screen to go black as if it's turned off. Anyone have a fix for this issue?
Sent from my GT-I9300 using Tapatalk 2
Erosinelysium said:
Hi all, I'm using the latest JB leak and I have noticed that some games end up causing the screen to go black as if it's turned off. Anyone have a fix for this issue?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Settings / development options/ disable hw overlays.
S
In future do a search common problem
Regards
Sent from my GT-I9300 using xda premium
Thanks but it resets after a reboot? Is there a way to get it to stick?
Sent from my GT-I9300 using Tapatalk 2
Erosinelysium said:
Thanks but it resets after a reboot? Is there a way to get it to stick?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
What ROM are you running?
Sent from my GT-I9300 using xda premium
i have the same problem too i tried ARHD and OMEGA. Both had same problem ( Arhd 5.0.0 dont know if problem still exists )
Everytime you boot up your phone you have to select it manually as far as i know.
the developer setting will not stick... I tried... The final solution is to change the ROM... I switched to XXDLH5... It works perfectly fine...
I'm on DLH6 4.1.1
Sent from my GT-I9300 using Tapatalk 2

I9110p with XXLSJ "NFC"

Right just got the update now its time to try and get the NFC working again. I should hope its just as easy as rooting the phone and flashing the JB NFC enabler then finishing it off with triangle away
has anyone else got NFC working yet ??
Sent from my GT-I9100 using Tapatalk 2
NFC is working fine after root.. and the NFC patch
Sent from my GT-I9100 using Tapatalk 2
Now just need to restore the i9100p on the boot screen will keep you updated
Sent from my GT-I9100 using Tapatalk 2
tidy said:
NFC is working fine after root.. and the NFC patch
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
which patch you used?
http://forum.xda-developers.com/showthread.php?t=1822447
Sent from my GT-I9100 using Tapatalk 2
I got the old i9110p screen back on the boot as well
using a simple program found on this site
its the 1st time I've had a true debraned ROM for the i9100p
Sent from my GT-I9100 using Tapatalk 2

Stock 2.11.605.19 custom kernel

Is there a custom kernel that will work for stock 2.11.605.19 rooted? I thanks!
Sent from my ADR6400L using Tapatalk 2
Yea imoseyon lean kernel will work with it. I don't remember the exact version but I think version 5.1
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Yea imoseyon lean kernel will work with it. I don't remember the exact version but I think version 5.1
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Sweet dude thanks
Sent from my ADR6400L using Tapatalk 2
Will the latest work? The 6.1 the video camera doesn't work
Sent from my ADR6400L using Tapatalk 2
bigligg said:
Will the latest work? The 6.1 the video camera doesn't work
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
I think maybe try one of the older versions. I remember that being a problem but I thought a workaround was found.
Sent from my ADR6400L using Tapatalk 2
Use the 5.2 version to keep Vid Cam on that base.
Although this one 6.20Dev13 is supposed to be patched.
THREAD with links and info...
Ok, cause I flashed 5.2 and phone booted but no picture. I could hear the Thunder in the background but no picture
Sent from my ADR6400L using Tapatalk 2
bigligg said:
Ok, cause I flashed 5.2 and phone booted but no picture. I could hear the Thunder in the background but no picture
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Make sure you clear caches (dalvik and cache) before you flash the kernel. Try going into recovery and clearing them.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Make sure you clear caches (dalvik and cache) before you flash the kernel. Try going into recovery and clearing them.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Yeah I did. 6.0dev13 is working perfectly.
Sent from my ADR6400L using Tapatalk 2

Categories

Resources