plzzz i installed the end 3.0 and i want back to the stock rom plzz help me !!!
So did u do nandroid backup 1st before flash cm7 or what?
kanivier said:
So did u do nandroid backup 1st before flash cm7 or what?
Click to expand...
Click to collapse
No :S
Sent from my GT-S5830 using XDA
foxvb74 said:
No :S
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Ok just checkout http://forum.xda-developers.com/showthread.php?t=961858
i can't understand anything :S plz tell me
Sent from my GT-S5830 using XDA
foxvb74 said:
i can't understand anything :S plz tell me
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Ok u need to flash ua stock rom with Odin so checkout a tutorial here http://forum.xda-developers.com/showthread.php?t=1034145
i try to flash it with odion before , but i had an error
Sent from my GT-S5830 using XDA
foxvb74 said:
i try to flash it with odion before , but i had an error
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
U can also try this http://forum.xda-developers.com/showthread.php?t=1437426
if your phone is indeed 5830 and not 5830i you will have no problem
Just download from samfirmware the version that suits u best
Put phone in dowload mode
Set up ODIN in the correct way (If its One package select one package, in the OPS put the cooper.ops, and start, if is multiple put the files in the correct order PDA, PHONE ...)
Hit star wait till odin says pass!
If you get in a bootloop just go to recovery wipe cache and do factory reset
Good to go! as simple as this!
Honestly the easier thing would be to just flash a Stock based ROM like Stocklite V6...it is basically stock from the factory...just all the bloatware has been removed so it's better than stock and I can assure you everything works.
Redownload the Odin package
Sent from my GT-S5830 using xda premium
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
:S:S:S
foxvb74 said:
Download Start...
Create File...
StartThread Detected : 1
StartThread Detected : 0
StartThread Detected : 0
StartThread Detected : 0
StartThread Detected : 0
StartThread Detected : 0
StartThread Detected : 0
StartThread Detected : 0
--- cannot open the usb serial port. code: 32
:S:S:S
Click to expand...
Click to collapse
Do you have the drivers foe your phone?
Sent from my GT-S5830 using xda premium
CoolAndroid1 said:
Do you have the drivers foe your phone?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
yes i have it :S
plzz help me :S
Sent from my GT-S5830 using XDA
close samsung kies first completly..its is odin killer..then try to flash Rom..
Sent from my GT-I9100 using xda premium
Try it flashing with Odin. Only need to download a full-room and put all the files correctly in Odin
silver2706 said:
close samsung kies first completly..its is odin killer..then try to flash Rom..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i tried but the same :S
jmascarell said:
Try it flashing with Odin. Only need to download a full-room and put all the files correctly in Odin
Click to expand...
Click to collapse
i'm doing this but odin give me this error
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
foxvb74 said:
i tried but the same :S
i'm doing this but odin give me this error
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
Click to expand...
Click to collapse
u can give another try..with different usb hub...i had the same issue then i tried another usb hub..
Sent from my GT-I9100 using xda premium
silver2706 said:
u can give another try..with different usb hub...i had the same issue then i tried another usb hub..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
when i changed the usb hub it can't connected
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
I tried several times to install the VillainRom on my Galaxy Ace but every time this is what happens:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
and I left it once once till it reached half an hour with no change, so what's wrong
ps my firmware is S5830JXKA3
Did you start ODIN as administrator?
The start thread behavior is normal.
If you fw not kpe. You should have kpe first. Or flash all file from villainrom. Not just pda!
Sent from my GT-S5830 using XDA App
1st, run as administrator (if using vista / 7)
2nd, use other cooper.ops file
install this driver http://goo.gl/YpgvN and run ODIN as Admin (right click menu - run as admin)
it maybe that kies is runnin in the backround,use task manager to kill it and flash all files that is given in the villain rom file
I am also having problem to upgrade from 2.2.1 to GB.
I have downloaded and installed the driver and make sure no kies is running but yet I still have problem in upgrading my ace to GB
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
Anyone knows whats going on?
Thanks
ronlkh said:
I am also having problem to upgrade from 2.2.1 to GB.
I have downloaded and installed the driver and make sure no kies is running but yet I still have problem in upgrading my ace to GB
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 32
Anyone knows whats going on?
Thanks
Click to expand...
Click to collapse
Hey!
Try to change the USB port. And dose the ODIN detect you phone? Dose you phone in "DOWNLOAD" mode? To put you phone in download mode, shut down the phone. Now hold together THREE buttons(HOME+POWER+VOL.DOWN). Hold them until you see in screen DOWNLOADING. Now you can release buttons.
CHEERS!
Finally the problem is from the PC, probably some USB device clash with odin. After using another PC, I am able to flash my ace now.
Thanks again.
When I flash the firmware for my galaxy ace with odin, it comes out "an unnamed file was not found".
The list of files in the tar file is as following,
$ tar tvf S5830DXKC1.tar
-rw-r--r-- chad.lee/domain users 18931712 2011-03-10 21:47 amss
-rw-r--r-- chad.lee/domain users 6225920 2011-03-10 21:12 boot.img
-rwxr-xr-x chad.lee/domain users 2699264 2011-03-10 21:48 csc.rfs
-rw-r--r-- chad.lee/domain users 6492160 2011-03-10 21:12 recovery.img
-rwxr-xr-x chad.lee/domain users 184832000 2011-03-10 21:16 system.rfs
Anyone knows which file is missing?
scottwen said:
When I flash the firmware for my galaxy ace with odin, it comes out "an unnamed file was not found".
The list of files in the tar file is as following,
$ tar tvf S5830DXKC1.tar
-rw-r--r-- chad.lee/domain users 18931712 2011-03-10 21:47 amss
-rw-r--r-- chad.lee/domain users 6225920 2011-03-10 21:12 boot.img
-rwxr-xr-x chad.lee/domain users 2699264 2011-03-10 21:48 csc.rfs
-rw-r--r-- chad.lee/domain users 6492160 2011-03-10 21:12 recovery.img
-rwxr-xr-x chad.lee/domain users 184832000 2011-03-10 21:16 system.rfs
Anyone knows which file is missing?
Click to expand...
Click to collapse
Cooper.ops
Ace-ing all tests.
EmoBoiix3 said:
Cooper.ops
Ace-ing all tests.
Click to expand...
Click to collapse
I flashed my ace successfully after I ticked the OPS.
Thanks.
hey guys
yesterday i try to update my phone from Gingerbread XXKPH 2.3.4
to [ROM][KPH/KPN]GingerReal-ACE-V1.1.0
http://forum.xda-developers.com/showthread.php?t=1228436
i ll used this package to update i was copy the file form zip GingerReal-ACE-V1.0-KPH to sd card and rebooting with recovery mode and updare from sd/card but the update was crashed now my phone cannot running i try to go back to Gingerbread but when i downloading the files with odin before commencing downloadin odin find the Port of USB with word Deticted !!!
but when i click Start to beigin install gingerbread this is a message
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 5
so guys i hope to help me
best wishes
eid el fitr moubarak
Code 5 is usally because Kies is running. Run task manager and go to Processes > end all *kies* processes. Turn off phone, remove battery, hold Vol D, Home and Power, insert battery and connect to PC.
xxxdstxxx said:
hey guys
yesterday i try to update my phone from Gingerbread XXKPH 2.3.4
to [ROM][KPH/KPN]GingerReal-ACE-V1.1.0
http://forum.xda-developers.com/showthread.php?t=1228436
i ll used this package to update i was copy the file form zip GingerReal-ACE-V1.0-KPH to sd card and rebooting with recovery mode and updare from sd/card but the update was crashed now my phone cannot running i try to go back to Gingerbread but when i downloading the files with odin before commencing downloadin odin find the Port of USB with word Deticted !!!
but when i click Start to beigin install gingerbread this is a message
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> --- cannot open the usb serial port. code: 5
so guys i hope to help me
best wishes
eid el fitr moubarak
Click to expand...
Click to collapse
You were NOT supposed to UPDATE from your SDCard .
You're supposed to use "install zip from sdcard" instead of "apply update" .
tnx master russ18uk now is running install
EmoBoiix3 i think the option install zip from sdcard not available on gingerbread
i don't remember wha't is the option i was used to running the update
xxxdstxxx said:
tnx master russ18uk now is running install
EmoBoiix3 i think the option install zip from sdcard not available on gingerbread
i don't remember wha't is the option i was used to running the update
Click to expand...
Click to collapse
Do you even have clockworkmod ?
hahahaha no i think i have first install it
ther'is some way to install apps on sd/card ?
best wishes
tnx
xxxdstxxx said:
ther'is some way to install apps on sd/card ?
best wishes
tnx
Click to expand...
Click to collapse
Yes.
Sent from my GT-S5830 using XDA App
xxxdstxxx said:
hahahaha no i think i have first install it
Click to expand...
Click to collapse
OH MY EFFING GOD . *faints*
zizibuba said:
Yes.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
Who i can do that ?
Hello Guys
last day i've flashed cm9 from recovery , after i rebooted my phone from recovery , it turned off , now it doesnt go to recovery or download mode , only i can go to where when u press volume + , home and power , how i can repair it ?
lcd doesnt turned on at all
odin detect phone on that but cant flash rom
log from odin :
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
pull battery out. insert it back. push download mode. reuse odin again. check ur odin version and files. redownload firmware if needed. if not detected, change usb port.
thx for reply but doesnt work , it doesnt boot at all , is there anyway to flash my mob under volume + , home mod ?
for make it bootable you need to read this.
http://forum.xda-developers.com/archive/index.php/t-1342569.html
Sounds like a nasty brick. You may have to lie to service center (say kies crashed when updating. If they ask how much ram your PC has say 1gb (kies needs 1.5 to function properly)
Sent from my GT-S5830 using XDA
hello everyone, I have a S5830 wont load past the SAMSUNG screen and after being there for a while the phone starts loading over, i have tried to flash it using Odin 4.38 and this firmware from xxx.samfirmware.c0m/ I used the firmware in one package and I also put the phone in DL mode
when I plug the phone to pc it says detected and the yellow square to the left comes up with (com 14).
After adding package and OPS and click start this is what I get and it doesn't pass there. Help would be greatly appreciated
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Try with 5 package rom...
Or set the ops file before everything else.
Sent from my GT-S5830 using Tapatalk 2
adiles said:
Try with 5 package rom...
Click to expand...
Click to collapse
Where can i get the 5 package rom ??
Or set the ops file before everything else.
Click to expand...
Click to collapse
I always put OPS before others
samfirmware.com
adiles said:
samfirmware.com
Click to expand...
Click to collapse
samfirmware has been changed to sammobile.com
Sent from my GT-S5830 using Tapatalk 2
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
i've tried odin and jtag my pc recognize(mith the thick with the battery) my phone but it dont boot not even in download mode
what can i do now?
it recognize it us android composite adb interface
markoskag25 said:
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
i've tried odin and jtag my pc recognize(mith the thick with the battery) my phone but it dont boot not even in download mode
what can i do now?
it recognize it us android composite adb interface
Click to expand...
Click to collapse
Make sure that you are in the Download Mode and not on Emergency Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". If you are in the Emergency Download Mode, odin will stop the flashing with that error. Also make sure the ops file is named as "Cooper_v1.0.ops". Wrong name can also give this error. Do post the result. Hope I Helped
mahithm said:
Make sure that you are in the Download Mode and not on Emergency Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". If you are in the Emergency Download Mode, odin will stop the flashing with that error. Also make sure the ops file is named as "Cooper_v1.0.ops". Wrong name can also give this error. Do post the result. Hope I Helped
Click to expand...
Click to collapse
unfortunately nothink comes on the screen ;/ what can i do now?and i has not enable debug mode. i think i'm screwed
markoskag25 said:
unfortunately nothink comes on the screen ;/ what can i do now?and i has not enable debug mode. i think i'm screwed
Click to expand...
Click to collapse
Can you tell us what exactly happened to your phone? Is it bricked? If yes, how? Can you enter both Recovery Mode and Download Mode?
mahithm said:
Can you tell us what exactly happened to your phone? Is it bricked? If yes, how? Can you enter both Recovery Mode and Download Mode?
Click to expand...
Click to collapse
i cant turn it on or nothing not even downlaod mode or recovery but odin reconize but it's always going stuck
here
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
markoskag25 said:
i cant turn it on or nothing not even downlaod mode or recovery but odin reconize but it's always going stuck
here
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
Click to expand...
Click to collapse
Try this guide to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post the result. Hope I Helped
mahithm said:
Try this guide to force open Download Mode from odin. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post the result. Hope I Helped
Click to expand...
Click to collapse
thks you so much but odin is stucking with this method too:/
markoskag25 said:
thks you so much but odin is stucking with this method too:/
Click to expand...
Click to collapse
is ti possible in enable debug from my pc now?
markoskag25 said:
is ti possible in enable debug from my pc now?
Click to expand...
Click to collapse
Try this guide. Here is the link,
[SOLVED] - Manually enable adb debugging from recovery
Do post the result. Hope I Helped