Hi,
i have a problem, the logo screen of samsung galaxy ace s8.. waits for about 40 seconds/more and only afterwards goto boot animation which takes a while to.
i don't remember the phone acting that way usually the logo screen is only for a moment.
iv installed stock after Cyanogen and i understand thats not good but i used stock light 6 which should be supported and it does work except for this part.
what can cause this kind of behavior?
and second question.since i wanted to return to stock rom i checked it out and i have 2 questions about it
1) can i use kies and is it better or worse than odin?
2) what are the different between the same versions of android and what does fit me (for example S5830XWKS2 S5830XXKPO both are 2.3.5 and 2.3.6 have different one completely)
thanks in advance for any help
well i can answer your second question
2.3.xx versions are just minor updates ...sometimes they fix wifi and bluetooth problems and sometimes also improve battery life..they improve the stability and and performance if the phone and add some eye candys ( the 2.3.5 version adds overscroll glow effect)...
about your first question : did u wipe cache partition after flashing the rom??? see if it helps...
Proud to own an ANDROID
Prouder to be a part of XDA
i tried to clean cache and everything that is needed
no luck
about the question about firmware: both are 2.3.5: 2.3.5 S5830XWKS2 2.3.5 S5830XXKPO
the question is what it the difference between them.
errdos said:
i tried to clean cache and everything that is needed
no luck
about the question about firmware: both are 2.3.5: 2.3.5 S5830XWKS2 2.3.5 S5830XXKPO
the question is what it the difference between them.
Click to expand...
Click to collapse
they are for diffrent countries and regions ...like 2.3.6 for india is ddkq8 but for europe and other places its a diffrent version having a diffrent code...
Proud to own an ANDROID
Prouder to be a part of XDA
Related
I have an European Device with Arabic fonts installed , but it does not read Arabic even after updating to the last ( PDA:XWKF3 - PHONE:XXKE7 - CSC:XEUKD1 ).. still can't read Arabic .. so im wondering if i installed the new rom that i found on samfirmware I9100XXKG1 Android 2.3.4 , will it support Arabic reading or not
if your willing to help , please just open the bbc.co.uk/arabic/ or any Arabic site on the default system browser and tell us if its reading Arabic correctly ( that if you know arbaic ) or print the screen to us ..
Thanks in advance
Using Villainrom 2.0:
Looks the same in the default browser.
Thanks prodygee .. you saved me time. i was about to install the ROM ..
do you think they will ever release an update for SGS2 that would make the European devics at least just read arabic !
I'm not sure. I can't read Arabic, I can do Japanese, but I can't do better . Glad I could help you
yeah thanks you really helped .. its not reading arabic still .. may i ask what software you use for the screen capture ?
It works on my phone alright! The SGS2 has a built-in screencap utility. You need ot hold the home-button and press the unlock button quickly after that. You'll see a white border flash around the screen indicating it took a picture.
You can then view them in the gallery
awesome ! new trick that i was looking for ! ur the best
using arabic
you can install madmack rom to read write Arabic on a European SGS2. that is the case with me and it works flawlessly. It is basically taken from an SGS2 dump from the UAE I guess
only 2.3.3 can read arabic correctly for all the apps
if you need only browser on 2.3.4 you can use opera for connected letters
otherwise you need to use a released source firmware with modified libcore
madmack 1.5 works fine if you need a completely arabized phone with connected letters
Can you please answer my questions guys, thanks in advance:
1) So the 2.3.4 update will not include connected Arabic letters on browser, gmail, messaging??!!
2) Does Madmacks ROM requires the device to be ROOTED?
3) If not, Am I gonna be able to buy apps from the market?
4) Does Madmack's ROM affects the battery?
Thanks
Ayhamov:
1. As of this write up Samsung hasn't released Arabic firmware based on Android 2.3.4
2. If you want to flash the latest european firmware XXKG5 or XXKG6 yet have arabic letters connected then you would need a special kernel which allows you to update/overwrite a few files in the system folder, so definately you will *need to root* your device (I recommend using CF-Root's kernel corresponding to your flashed ROM to get the job done)
MadMack and I have released a package which you could flash using ClockWorkMod (CWM) recovery. I am attaching the latest version that I have here.
3. As for buying software from the market; no it's not affected by rooting.
4. To my knowledge the battery life is not affected by arabization, however, to achieve the task a process of deodex'ing the system framework program is performed which disables some acceleration in the system/browser. we don't have a workaround which maintains the performance yet. Some efforts have been put into getting the job done with maintaining the performance but till date we don't have a success.
Good luck,
Brightidea.
Ayhamov said:
Can you please answer my questions guys, thanks in advance:
1) So the 2.3.4 update will not include connected Arabic letters on browser, gmail, messaging??!!
2) Does Madmacks ROM requires the device to be ROOTED?
3) If not, Am I gonna be able to buy apps from the market?
4) Does Madmack's ROM affects the battery?
Thanks
Click to expand...
Click to collapse
Has anyone tried flashing a CSC from 2.3.3 which supports Arabic into 2.3.4? Does it work properly?
Sleepycat3 said:
Has anyone tried flashing a CSC from 2.3.3 which supports Arabic into 2.3.4? Does it work properly?
Click to expand...
Click to collapse
Interesting idea -I will try that though I have a feeling it won't be as simple as that
Sent from my GT-I9100 using XDA App
Flash the UAE's v2.3.5, it has no problems..
Sent from my GT-I9100 using Tapatalk
Hello everybody,
I bought a new Galaxy S2 with Android 2.3.3 on it, two days ago i've upgraded it to 2.3.4 through Kies, and now my screen seems darker in the same conditions.
Did somebody experience the same problem or is it okay?
Version Android 2.3.4
Kernel [email protected] #2
GINGERBREAD.XWKI4
Yea i have expiremented this problem before when i flashed a kernel i didnt fix it but i have flashed to old software
Sent from my GT-I9100 using xda premium
The colors got deeper, and the screen darker, but when i start the camera for a second the everything seems ok, but it gets back to darker again...
go to stock kernel
or flash http://androidadvices.com/wp-content/uploads/2011/05/XWKDD_insecure.tar
via odin
MemphysX said:
Hello everybody,
I bought a new Galaxy S2 with Android 2.3.3 on it, two days ago i've upgraded it to 2.3.4 through Kies, and now my screen seems darker in the same conditions.
Did somebody experience the same problem or is it okay?
Version Android 2.3.4
Kernel [email protected] #2
GINGERBREAD.XWKI4
Click to expand...
Click to collapse
i got this when i move from 2.3.3 to 2.3.5 too
don't known how to fix
Sorry for the question i`m new to android, how to go to stock kernel?
Hello guys I've just installed 2.3.6 official rom on my SGA. I've noticed some thing that really bugs me... The lock bug. I had 2.3.3 on some time ago because 2.3.4 had the same thing when you unlock your phone it laggs so much that you have to wait like for 2-3 sec so you can work on it. Not long ago I installed 2.3.5 which was even worse from 2.3.4 so I downgraded to 2.3.3 and last few days I've noticed a new version of stock rom was released the 2.3.6 which works better then 2.3.4 but still laggs... Does any one know any solutions how to fix it and please don't advice me any custom rom cause I like the stock. My homescreen is almost empty and the device is clean so I should be a problem in some app or something .
So any solutions?
Mariborcan said:
Hello guys I've just installed 2.3.6 official rom on my SGA. I've noticed some thing that really bugs me... The lock bug. I had 2.3.3 on some time ago because 2.3.4 had the same thing when you unlock your phone it laggs so much that you have to wait like for 2-3 sec so you can work on it. Not long ago I installed 2.3.5 which was even worse from 2.3.4 so I downgraded to 2.3.3 and last few days I've noticed a new version of stock rom was released the 2.3.6 which works better then 2.3.4 but still laggs... Does any one know any solutions how to fix it and please don't advice me any custom rom cause I like the stock. My homescreen is almost empty and the device is clean so I should be a problem in some app or something .
So any solutions?
Click to expand...
Click to collapse
I ve just installed it root, v6 supercharged, loopiness tweak, cf root, a2sdgui and changed modem to DXKPD and boy its superfast and of course no stock bootanimation. Try it
EDIT: I also remove quite a few apps that are in the system that can be installed on sd.
I've tried many different stock and custom ICS ROMs on my SII and the sound wont work on any of them. Also any app using sound freezes and/or dies, including phone. The only ROM that works fully is stock Gingerbread.
The phone is parallel imported and has been flashed so many times I have no idea who the original carrier was . Is there any way to find out via the hardware?
I've given up on it myself and brought a Note II, but I would still like to get ICS working on it as I have given it to the misses. I don't know why ICS should have problems running on it as Gingerbread works fine.
Please, if anyone can help with this problem.
Model: GT-I9100
SSN: -9100GSMH
FCC ID: A3LGTI9100
That's weird, just flash an unbranded 4.0.3. If not, check jb leak to see if it flies.
Just tried JB and same problem. I guess the misses will just have to stick with Gingerbread.
hello
i'm using samsung galaxy i5510 , and my problem is i'm having a dim dark invisble screen on cwm recovery 5.0.2.6 and some 2.3.6 official roms , and in all modded roms 7 and 10 that i found here ,even with this problem i succeed installing some mod roms using cwm recovery that is barely visible but the same problem the rom installed is dark and invisible but installed ,
here a photo is what the screen looks like it's from another guy on youtube having same problem with i5510
i dont want to come back to 2.2 or 2.3.6 beacause i can do it but i want a solution to install modded roms and cwm recovery without the screen problem , thanks to developper for help
up any help ????
ryu11 said:
up any help ????
Click to expand...
Click to collapse
If you are referring to a problem like this video:
http://www.youtube.com/watch?v=Kwll8ZfgaD0
Then i had the same issue, the only fix is to either never let the screen turn off (which consumes the battery) or run one of the two roms that dont have that issue, those would be
- Stock Gingerbread 2.3.6 latest ones (TPH or PAN)
- Arkas 1.2.3. (based on Gingerbread)
Every other single rom i tried has the same issue (CM7-10,MiUi,...).
Best of luck
Muaadib said:
If you are referring to a problem like this video:
Then i had the same issue, the only fix is to either never let the screen turn off (which consumes the battery) or run one of the two roms that dont have that issue, those would be
- Stock Gingerbread 2.3.6 latest ones (TPH or PAN)
- Arkas 1.2.3. (based on Gingerbread)
Every other single rom i tried has the same issue (CM7-10,MiUi,...).
Best of luck
Click to expand...
Click to collapse
yes this the problem that i have ,the one on the video
i'm now on arkas 1.2.3 based on gingerbread but i want to install cm 7 or cm 10 .. , and i see that many other users of i5510 are on cm 10 without having the invisible display problem
So please can someone help us to define why cm 7 10 work without problems on some i5510 ans don't on other i5510 ,it will be great
up any solutions ????