First of all, big thanks to mastibeta for testing and confirming that it works.
Disclaimer
This is a dangerous method and could potentially brick your phone. The CWM update makes it a bit more foolproof, but if something fails, it is not my responsibility!
AT&T i717, Rogers i717R, Telus i717D & Bell i717M ONLY! (according to jpeg42, it also works with the ics leak)
Description
This resets the flash counter (kernel/recovery/... flashed through Odin) back to stock.
How to use
Download the zip file. Its an update-zip for cwm.
Put it on your sdcard, boot into recovery and flash it.
Fun Fact
- Samsung knows how many kernels/recoveries you've flashed through odin.
- The single counters are up to 255, so theoretically you can "reset" by flashing 256 of each (Samsung will still know you flashed something)
- Samsung knows what was the last thing you've flashed
- Flashing System is not counted.
Image (Thanks to sfb14)
Thanks to
Dagr8, Ciku, bigbiff, lpsi2000 - for providing the data to figure this out
Tearrek, loftydan - for rogers data
Jckpsa - for telus data
MrJoran - for bell data
mastibeta - for testing the first version it
Download
first +10 char
My count is 38 already... Will try this later today.
Sent from my SAMSUNG-SGH-I717 using xda premium
Now we need someone with 0 counter to post his rogers block if you have a rogers with 0 counter pm me I will guide you to the process .
Thanks
Was a scary 10 seconds, but it definitely works. Need to get this man a Gnote.
mastibeta said:
Was a scary 10 seconds, but it definitely works. Need to get this man a Gnote.
Click to expand...
Click to collapse
^^
it was like the longest time in my life waiting for the reply
mastibeta said:
Was a scary 10 seconds, but it definitely works. Need to get this man a Gnote.
Click to expand...
Click to collapse
+1
if yuou can take a screenshot for all them non believers .
So we can apply this .zip file through CWM as many times as we want to get the counter reset, is this correct?
Not sure how i would go about getting a screen capture in download mode, via adb perhaps?
BRAVO... downloading this bad boy now.
mastibeta said:
Not sure how i would go about getting a screen capture in download mode, via adb perhaps?
Click to expand...
Click to collapse
nah good old camera , adb drivers dont work in dl mode .
just tried it heres a pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
StyleUkno said:
So we can apply this .zip file through CWM as many times as we want to get the counter reset, is this correct?
Click to expand...
Click to collapse
Correct
+10 char
Again...accomplished with no device. Mad props
I am completely broke but sending a donation man. Cant wait to see what you accomplish with a device
Sent from my SAMSUNG-SGH-I717 using XDA App
StyleUkno said:
So we can apply this .zip file through CWM as many times as we want to get the counter reset, is this correct?
Click to expand...
Click to collapse
correct, at least until samsung decides to change something...
00mred00 said:
Again...accomplished with no device. Mad props
I am completely broke but sending a donation man. Cant wait to see what you accomplish with a device
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
im gonan post a bounty for this guy to get a note ..
Dude, you more than deserve this: 2WA8263235981790W
Thanks for all your effort.
Amazing. Like someone else said, I'm broke but ill send a donation. This is just amazing.
Sent from my SAMSUNG-SGH-I717 using xda premium
I am getting the following error message when trying to apply this patch:
E: failed to verify whole-file signature
E: Signature verification failed
DAGr8 said:
im gonan post a bounty for this guy to get a note ..
Click to expand...
Click to collapse
He should get something. Does the $5 that I donated Monday count?
(I know it's only $5, but it's something)
Related
Here is the official MR4 update Verizon released for the Eris. This is for the people who haven't got the update yet and can't wait. And for the people who don't know how to install it (like myself).
Click to Download
Instructions:
1.) Move it to the root folder of your SD card.
2.) Rename it "update.zip"
3.) Turn your phone off
4.) Turn it back on by pressing "Vol-Up & End/Power" until the phone starts.
5.) Wait 15 seconds -- Then press "Vol-Up & End/Power again"
6.) You should get a short menu, one entry of which will say something about "sdcard:update.zip"; choose that.
This update is keyed to only specific releases, namely leak-V3 and OTA2.1. It will abort on 1.5, leaks V1 & V2, and the original root-ROM.
Credit goes to Eris User
So I know this has been asked before, but I figure this is a safe place to ask again...
This is basically just a radio update, no? If it's more than that, what else is it? I'm wondering if I should put it on my wife's phone to cure some of the bugs that she's always complaining about.
Sent from my FroyoEris using Tapatalk
HTC Legion said:
Here is the official MR4 update Verizon released for the Eris. This is for the people who haven't got the update yet and can't wait. And for the people who don't know how to install it (like myself).
Click to Download
Instructions:
1.) Move it to the root folder of your SD card.
2.) Rename it "update.zip"
3.) Turn your phone off
4.) Turn it back on by pressing "Vol-Up & End/Power" until the phone starts.
5.) Wait 15 seconds -- Then press "Vol-Up & End/Power again"
6.) You should get a short menu, one entry of which will say something about "sdcard:update.zip"; choose that.
This update is keyed to only specific releases, namely leak-V3 and OTA2.1. It will abort on 1.5, leaks V1 & V2, and the original root-ROM.
Click to expand...
Click to collapse
Excellent cut-n-paste work.
saintdice said:
So I know this has been asked before, but I figure this is a safe place to ask again...
This is basically just a radio update, no? If it's more than that, what else is it? I'm wondering if I should put it on my wife's phone to cure some of the bugs that she's always complaining about.
Sent from my FroyoEris using Tapatalk
Click to expand...
Click to collapse
New radio, new kernel, updated (Java) framework components, update HTC Sense apps - lots of fixes.
Here is a XDA post which details what gets patched or updated in the (July 2010) OTA
Probably a lot of minor bugfixes for things that lots of people never experience.
bftb0
Could someone post a screen of the software information with the new RUU, please? I was going to call VZW and wanted to make sure I had the right information when they were going to crosscheck my numbers with theirs.
Thanks
this is going to be another one of my famous rookie questions.... but will this mess up my root?
kalala said:
Could someone post a screen of the software information with the new RUU, please? I was going to call VZW and wanted to make sure I had the right information when they were going to crosscheck my numbers with theirs.
Thanks
Click to expand...
Click to collapse
?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Eris using Tapatalk
bftb0 said:
Excellent cut-n-paste work.
Click to expand...
Click to collapse
Lol thanks! Wasn't trying to take credit. But I added credit to first post. Forgot. =P
Sent from my Eris using Tapatalk
fenwaynomar45 said:
this is going to be another one of my famous rookie questions.... but will this mess up my root?
Click to expand...
Click to collapse
Yes
Sent from my Eris using Tapatalk
Dustintendo said:
Yes
Sent from my Eris using Tapatalk
Click to expand...
Click to collapse
Are you sure? And if so how? And can you reroot after or does it change you to a new locked h_boot?
Sent from my FroyoEris using XDA App
fenwaynomar45 said:
this is going to be another one of my famous rookie questions.... but will this mess up my root?
Click to expand...
Click to collapse
it will just mess up su permissions.
look here for the fix>http://forum.xda-developers.com/showpost.php?p=7237278&postcount=31
Just_Another_noob said:
Are you sure? And if so how? And can you reroot after or does it change you to a new locked h_boot?
Sent from my FroyoEris using XDA App
Click to expand...
Click to collapse
looky>http://forum.xda-developers.com/showpost.php?p=7235739&postcount=24
Ok I go the update this morning via OTA and tried to install it & It came back with a ! inside a triangle Failed. I am Root only still running stock rom but have the updated over clock kernel. Is this my problem as to why it wont update? Also can I manually install it and then just have to re push SU? Or will it take root out and I just have to re-root?
Or should I not even worry about it and just run another rom?
Is there a new link to this?
Has someone uploaded this to a different location?
Google isn't finding it for me on any forums.
I am having the same issue. Can someone upload this to the git hub site? I am trying to return my eris and get a new one
Im trying to update to a new 2.2.2 update that bell just released for canadian users.
I download it, I press install, it reboots my phone into android recovery.
It begins to install the update, then it shows me this:
verifying current system...
assert failed: apply_patch_check ("/system/app/AccountAndSyncSettings.apk". "a bunch of numbers", "A bunch of numbers", E:Error in /cache/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
(Status 7)
Installation Aborted.
Can anyone help? Its really frustrating not being able to update.
My phone was rooted, deodexed, and I flashed a few .zip's to it. I factory reset it before I attempted to do this update.
HELP WOULD BE GREATLY APPRECIATED
This is the menu I'm in when I talk about "android recovery"
However, this is not my phone. This picture is just to jog your memory if you dont know what im talking about.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just reboot El phone
Sent from my MB860 using XDA App
neer2005 said:
Just reboot El phone
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Remove my battery and reboot it? The update said it would reboot itself.
Also, what does the picture I'm describing mean?
Thanks.
are we talking about 2.3.4 or what kind of update?
It means your phone is rooted and you need to do an SBF flash
Pretty sure that is the recovery screen. If I remember correctly if you touch above the search button it should take you into the recovery menu
samcripp said:
are we talking about 2.3.4 or what kind of update?
Click to expand...
Click to collapse
He's talking about the update from Bell that came out today. Its similar to the 4.1.83 update from At&t
Sorry guys its the 2.2.2 update released for bell atrices (in canada)
There is no menu unfortunately.
It looks like the bottom portion of this image, there is no menu.
Try pressing the bottom left and right corners, should bring up that screen.
Cheers!
Since it's 43MB is size, I am guessing glad root or my util should be able to preserver root using frozenfish in /osh/sbin.
Downloading it now, Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip in /cache, I'll upload it to my dropbox for folks when it's done.
Cheers!
How can those who have flashed 2.1.1 get this update?
You would need stock Bell firmware for an update to apply I would think. Probably not much different that what you have anyway, I'll see if I can nab the radio from it though.
NFHimself said:
Try pressing the bottom left and right corners, should bring up that screen.
Cheers!
Since it's 43MB is size, I am guessing glad root or my util should be able to preserver root using frozenfish in /osh/sbin.
Downloading it now, Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip in /cache, I'll upload it to my dropbox for folks when it's done.
Cheers!
Click to expand...
Click to collapse
Thanks so much. That brought up the screen.
However, my update failed. I'll post the exact error or PM you if I can't figure it out for myself.
Will that update be flashable via CWM? And where can I find your dropbox.
Regards,
Mag
I'll post when I get it done.
Here you go:
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
http://dl.dropbox.com/u/23800522/Blur_Version.0.37.4.MB860.BellMobility.en.CA.crc
/cache/recovery/command = --update_package=CACHE:Blur_Version.0.37.4.MB860.BellMobility.en.CA.zip
Frozenfish works to get root access again, in fact your su and shsu binaries stay in the system folder, all you have to do is chmod 06755 /system/bin/shsu etc.
Cheers!
NFHimself said:
You would need stock Bell firmware for an update to apply I would think. Probably not much different that what you have anyway, I'll see if I can nab the radio from it though.
Click to expand...
Click to collapse
(n00b question) Why would the radio be useful and how would I install it?
DELETE POST NFHimself is too damn fast
My error log while updating in android recovery haas been posted on my original post!
Please help! Thanks!
IrshaadH said:
(n00b question) Why would the radio be useful and how would I install it?
Click to expand...
Click to collapse
Well, if you are using a Bell Atrix in Canada and it's working right, then why not? How is unknown to me right now, the files are in the zip, might be able to do a swap in an sbf, not sure.
Just got 1850 in a speed test for upload indoors, fastest I've had yet, previous was ~1780, that could be a good reason.
Cheers!
Magnetox said:
My error log while updating in android recovery haas been posted on my original post!
Please help! Thanks!
Click to expand...
Click to collapse
I had the same error, I odexed my system and copied the zip and crc back to cache, and did the update again, it asked me if I wanted to install it, and as it was doing that I grabbed the command file from /cache/recovery and put it on my sdcard. So really, all you need to do is have those 3 files in /cache and reboot into android recovery and you should be good to go.
I am thinking that it's the patch files that need to have the original files in order to work.
Cheers!
y2whisper said:
zip is here if for some reason you have a bell rom and have trouble downloading.
http://db.tt/eo1hyTK
Click to expand...
Click to collapse
So, with this zip, would I be able to install on a 2.1.1 sbf from recovery mode?
This thread doesn't belong here.
1. Root your GS2 with the method on this page
http://forum.xda-developers.com/showthread.php?t=1285894
2. Go to market and search for "Galaxy S Unlock", the author is "Helroz".
3. Run the app from step 2. Go to "Unlock SGSII" tab on the top of the screen.
4. Tap on the first item:"Step 1 Backup files...."
5. Tap on the second item:"Step 2 Change lock-bytes", and wait until your phone restarts.
6.Bingo, your phone is sim unlocked after the reboot.
ljwnow said:
1. Root your GS2 with the method on this page
http://forum.xda-developers.com/showthread.php?t=1285894
2. Go to market and search for "Galaxy S Unlock", the author is "Helroz".
3. Run the app from step 2. Go to "Unlock SGSII" tab on the top of the screen.
4. Tap on the first item:"Step 1 Backup files...."
5. Tap on the second item:"Step 2 Change lock-bytes", and wait until your phone restarts.
6.Bingo, your phone is sim unlocked after the reboot.
Click to expand...
Click to collapse
Went and confirmed it does actually work here is my screenshot showing it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awesome. Works. Thankssss
jivy26 said:
Went and confirmed it does actually work here is my screenshot showing it.
Click to expand...
Click to collapse
Thanks jivy26. But your picture won't show up...
Lol should now and thanks for the find
jivy26 said:
Lol should now and thanks for the find
Click to expand...
Click to collapse
No problem. Thanks for the guide of root.
Thanks for the guide! I'm glad to be back on this site after getting rid of my iPhone!
That's gotta be the easiest rooting instructions I've ever read! Helroz you are a god...
oh wow! THANK YOU FOR THIS! wooooooooooooooot!!
edit: how do you check if you're unlocked or not? (like the picture from above)
Awesome, worked for me. Thanks!
illmac said:
oh wow! THANK YOU FOR THIS! wooooooooooooooot!!
edit: how do you check if you're unlocked or not? (like the picture from above)
Click to expand...
Click to collapse
*#7465625#
thanks dude! this couldn't have come at a better time! gonna be out of the country next week..sweeeeeeeeeeeeeet
illmac said:
thanks dude! this couldn't have come at a better time! gonna be out of the country next week..sweeeeeeeeeeeeeet
Click to expand...
Click to collapse
Without sim unlock, this phone is just a brick of mine...I am not with at&t...
so you went out and bought the phone without a guarantee of a working unlock?
Exactly ...
Sent from my SAMSUNG-SGH-I777 using xda premium
Did Not Work
Ok, I had my SGII rooted with the ClockworkMod.Tar thru Odin3 and SuperoneClick. I also OC using Odin3 with galaxysii_OC_V1.tar thru Odin3 again and install setcpu..
I ran this unlock, but it never reboot, so I manually rebooted and check using the dail pad (from post here), and it says that I'm still lock.. I try it a second time and it did not work either..
Any Help will be appricated.. Also, my back button also does not work anymore. My Home button now acts as a back button.. anyone have this problem??
SkyDragon8 said:
Ok, I had my SGII rooted with the ClockworkMod.Tar thru Odin3 and SuperoneClick. I also OC using Odin3 with galaxysii_OC_V1.tar thru Odin3 again and install setcpu..
I ran this unlock, but it never reboot, so I manually rebooted and check using the dail pad (from post here), and it says that I'm still lock.. I try it a second time and it did not work either..
Any Help will be appricated.. Also, my back button also does not work anymore. My Home button now acts as a back button.. anyone have this problem??
Click to expand...
Click to collapse
First make sure your superuser is working. As far as I know, there is no kernel for At&t GS2 that supports OC. Am I out dated?
ljwnow said:
First make sure your superuser is working. As far as I know, there is no kernel for At&t GS2 that supports OC. Am I out dated?
Click to expand...
Click to collapse
Superuser is working I just check.. and now i have other problems. I now can not hear any sound nor the reciver of my call can hear my voice... the call goes thru but it's like everything is muted???
Sky, do you have the AT&T Galaxy S2 or the international version?
Wow, whoever did the spell checking for Samsung really screwed that one up!
"Personalizatiob Status."
jivy26 said:
Went and confirmed it does actually work here is my screenshot showing it.
Click to expand...
Click to collapse
I can't boot into recovery and i'm trying to flash with Odin the Kernel + cache + rooted UCKK6 system package from http://forum.xda-developers.com/showthread.php?t=1286432
When I put it in the pda slot (after deleting 7z extension so it's just a .tar) I click start, and it sits for a second and then fails. Now when I try to reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
We got it into download mode but that file keeps saying FAIL. What do we do?
Try downloading the file again. It night be corrupted.
Also make sure you have the correct drivers.
Sent from my SGH-I777 using Tapatalk
jdbeitz said:
Try downloading the file again. It night be corrupted.
Also make sure you have the correct drivers.
Sent from my SGH-I777 using Tapatalk
Click to expand...
Click to collapse
^^^^this - and if you're trying Odin, you might try Heimdall instead - or try the instructions for using ADB in here http://forum.xda-developers.com/showthread.php?t=1311081 (if you got rooted before) - that might get you to CWM again.
hrffd said:
I can't boot into recovery and i'm trying to flash with Odin the Kernel + cache + rooted UCKK6 system package from http://forum.xda-developers.com/showthread.php?t=1286432
When I put it in the pda slot (after deleting 7z extension so it's just a .tar) I click start, and it sits for a second and then fails. Now when I try to reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
We got it into download mode but that file keeps saying FAIL. What do we do?
Click to expand...
Click to collapse
Read the directions!!!!
I cannot believe someone thought that just removing an extension was a good way to extract a file!
Sent from my GT-P7510 using Tapatalk
hrffd said:
When I put it in the pda slot (after deleting 7z extension so it's just a .tar) I click start, and it sits for a second and then fails.
Click to expand...
Click to collapse
If I am reading this correctly, does this mean you just removed the .7z extension and then tried to flash the resulting file. If so, that is your problem because it is a 7z file even after you remove the extension. What you need to do is extract the tar from the 7z using an unarchiving tool like win zip or 7 zip or similar. Then flash the extracted tar file.
Wow, people this inept with computers in general should not be flashing phones. I really try not to flame people. But this is really indicative of the kind of people that should just leave their phones stock.
Sent from my SGH-I777 using xda premium
mfreywald said:
Wow, people this inept with computers in general should not be flashing phones. I really try not to flame people. But this is really indicative of the kind of people that should just leave their phones stock.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
+ 1
Sent from my SGH-I777 using xda premium
chibixzero said:
+ 1
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
+2. this is the first time my jaw literally dropped due to reading something.
nbell13 said:
+2. this is the first time my jaw literally dropped due to reading something.
Click to expand...
Click to collapse
Makes for a good laugh. at the end of my shift at work
Immediate help you want? For your own stupidity? Perhaps you are mistaken in thinking this place exists just to give you immediate help for a self-inflicted screw-up. This is NOT the Samsung Help Desk. Help is given on the forum's terms, not yours. Try to be a little less stupid and a lot more gracious next time you mess something up. No one in here owes or is owed anything.
You are not helping anyone with those comments...
Really annoying on this forum.... especially cuz devs makes his names providing services to those people.
RatusNatus said:
You are not helping anyone with those comments...
Really annoying on this forum.... especially cuz devs makes his names providing services to those people.
Click to expand...
Click to collapse
It's helping me...the fewer of these threads there are the easier it is for me to find what I want with the search function.
I hereby nominate Miami Son for a moderator position
Sent from my SGH-I777 using XDA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
None of the other posts I have read really seemed to answer what exactly happened to my phone.
I recently rooted my GS2 using ODIN and everything went over perfectly .
I noticed soon after that when the phone was turned on, the Samsung screen would appear, have a yellow triangle with an '!' in it, and also say I9100 (Which was the immediate give away something wasn't right).
Before I could do anything to the phone to fix the issue, the phone shut off on me, and now won't turn back on.
I have tried booting into recovery and download modes and can't get past the initial screen. The phone also will not charge.
When I connect it to the PC, it is recognized as a Samsung device, but not in ODIN.
Any feedback would be greatly appreciated.
EDIT:
After troubleshooting, I gained access to download mode. Reflashed, and everything is okay.
Also that i9100 screen with the yellow triangle is normal. There are posts about how to remove the triangle by flashing a stock kernel or you can buy a jig on ebay.
Sent from my Galaxy S II running AOKP Jellybean
AngelsNecropolis said:
Also that i9100 screen with the yellow triangle is normal. There are posts about how to remove the triangle by flashing a stock kernel or you can buy a jig on ebay.
Sent from my Galaxy S II running AOKP Jellybean
Click to expand...
Click to collapse
... Or use triangle away
Sent from Team Pirate! Using Tapatalk 2
AngelsNecropolis said:
Also that i9100 screen with the yellow triangle is normal. There are posts about how to remove the triangle by flashing a stock kernel or you can buy a jig on ebay.
Sent from my Galaxy S II running AOKP Jellybean
Click to expand...
Click to collapse
please don't give information unless you know enough about the issue. Its awesome to try and help. But if you end up costing someone more time and aggravation by guessing or not knowing if you're right or not its almost better to let someone else field the question. As previously stated there's an app that fixes this.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Phalanx7621 said:
please don't give information unless you know enough about the issue. Its awesome to try and help. But if you end up costing someone more time and aggravation by guessing or not knowing if you're right or not its almost better to let someone else field the question. As previously stated there's an app that fixes this.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Right. This one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Galaxy S II running AOKP Jellybean
AngelsNecropolis said:
Right. This one.
Sent from my Galaxy S II running AOKP Jellybean
Click to expand...
Click to collapse
Yupp exactly
Hi guys..Sorry for use this thread to expose my case. Yesterday late, I intended to replace the kernel in my Galaxy2 and I don't know why the phone do not pass over the original screen (see attach). No access to Recovery or Download mode is available. I tried to unroot and start again all the process when I felt a soft brick in the pass, but still no access to Download mode that permit me to access via ODIN and reinstall kernel and recovery to solve the problem.
Any suggestions??
ROM Task JB latest release 0830
Dream Kernel
EDIT. After a long fight with my phone using ODIN, Doomroot and other tools, thanks God, it's solve. Thanks.