[TWEAK][4.0.3]{c/o Siyah Kernel}{Arch.pro CPU:1.6GHz/GPU 400Mhz}<Arch.bat added>
closed
closed
My SGS2 didn't boot anymore after flashing the 3.0beta7 .tar via Odin. Flashed my old kernel back and it boots again..
Nice and interesting topic matey.
Will try and report it.
But could I ask you settings for best battery life? I mean sure you can help too.
Cheers
Sent from my little monster GS2
Kiwitje said:
My SGS2 didn't boot anymore after flashing the 3.0beta7 .tar via Odin. Flashed my old kernel back and it boots again..
Click to expand...
Click to collapse
1. ICS ROMs only
2. Siyah kernel compatable.
3.try a Rom tht already uses siyah 3.0
or check gokhanmorals thread:
Siyah Kernel 3.0 Thread
Test it now and report it later..thx..was searching optimal settings for extweaks..
Thank's man.
Look good here.
It's the first time i tweak my phone, but it's possible to do that without apps, just by editing a file via ssh?
I don't like GUI ^^
Thank's
Nice topic mate... I wonder where you got the idea from...
can we apply "save as boot settings" ?
and one more thing. Do we need to apply your setting in both apps i.e. extweaks and voltage control ?
hemal_4404 said:
can we apply "save as boot settings" ?
Click to expand...
Click to collapse
First test if these settings adapt to your device using the GUI elements(VC/ExTweaks).....
test for a day or so...if all goes well....u cud go init.d
Do we need to apply your setting in both apps i.e. extweaks and voltage control ?
hemal_4404 said:
Do we need to apply your setting in both apps i.e. extweaks and voltage control ?
Click to expand...
Click to collapse
the ExTweaks are recommended.
VC is optional.
I have applied both but it does'nt seems any problem.
GUI has been improved and for battery let me check for a day.
Bechmark result has been decreased to 3438 as previously it was 4410 with same Siyah kernal in GS 2 with Omega V6.0 ICS black blue edition.
hemal_4404 said:
I have applied both but it does'nt seems any problem.
GUI has been improved and for battery let me check for a day.
Bechmark result has been decreased to 3438 as previously it was 4410 with same Siyah kernal in GS 2 with Omega V6.0 ICS black blue edition.
Click to expand...
Click to collapse
Benchmark is gonna give u junk values.
It conflicts with the tweaks meant for battery savings....to generate a lower value.
In Real-Time its a whole different scenario
Thanks for good explaination.
Someone has a good config for AOSP? ^^
amus76 said:
Someone has a good config for AOSP? ^^
Click to expand...
Click to collapse
Actually havent tested on AOKP.
If anyone could test it and give feedback...that would be nice.
Sent from my GT-I9100 using XDA
Allright my phone gets f*ck as often when i'm at 1600 mhz
but all is fine at 1400, you're UV is quite good, mine were hardcore, I stay with yours
Hum Quadrant @ 1400 with dual core hotplug and performance, 3 runs: 4325
From an AOKP user
thx buddy.. going to give it a try next couple of days.. running wanam v10.3 so far so good
ram3n said:
Nice and interesting topic matey.
Will try and report it.
But could I ask you settings for best battery life? I mean sure you can help too.
Cheers
Sent from my little monster GS2
Click to expand...
Click to collapse
i Added the appropriate changes to juice the best out of your battery with this config.
Have a look
Related
Need help finding an article I had read on fixing the Fascinates font pixelation. Pictures look awesome, but the fonts are a bit fuzzy, especially smaller fonts. I had read it just last week, but cannot find it in my history anywhere. Whatever they did really sharpened the fonts (at least in the screenshots). I am pretty sure it was about the Fascinate, but it may have been AMOLED in general.
Thanks in advance.
Found it!
http://project-voodoo.org/color
mising said:
Found it!
http://project-voodoo.org/color
Click to expand...
Click to collapse
lol, I was just thinking about this. I don't think there's a voodoo kernel for the Fascinate that supports this. I would LOVE to be proven wrong though.
Yeah, I just installed a voodoo kernel and don't see any color settings, just audio via the Voodoo Control App.
J Shed said:
lol, I was just thinking about this. I don't think there's a voodoo kernel for the Fascinate that supports this. I would LOVE to be proven wrong though.
Click to expand...
Click to collapse
Incorrect, there are a few that support this color fix. However as I recall reading, it only works at 100% brightness.
mexiken said:
Incorrect, there are a few that support this color fix. However as I recall reading, it only works at 100% brightness.
Click to expand...
Click to collapse
Do you know which ones offhand?
I am using jt1134's latest at 100% brightness and don't see any difference.
Now that I am on the right track though, I will just have to do a little more research.
mexiken said:
Incorrect, there are a few that support this color fix. However as I recall reading, it only works at 100% brightness.
Click to expand...
Click to collapse
Like I said, I'd like to be proven wrong, so... link?
I'm not finding anything for the Voodoo 5 kernels for the Fascinate.
Link not working
mising said:
Found it!
http://project-voodoo.org/color
Click to expand...
Click to collapse
Could you please re-post? The link no longer appears to be active
Thanks in advance.
timbuctoo said:
Could you please re-post? The link no longer appears to be active
Thanks in advance.
Click to expand...
Click to collapse
Wow, it has been a while since I have been on my Fascinate! I think Voodoo no longer supports color tuning though. My son is using my Fascinate right now with Devil Kernel and I think it supports color tuning through an add on program. I pulled the following from the Devil Kernel thread on the Fascinate. I will also check on my sons phone tonight to see if any of these work. Good luck!
http://forum.xda-developers.com/showthread.php?t=2149067
Tweaks --- Over Clocking and Kernel Control Programs --
Please don't ask about " devil kernel manager"
but you could click here for more about Devil Kernel tweaks and apk's to download
>>>>> >>>> >>>
Please don't ask about " devil kernel manager" || it still doesn't like to work except for a few settings,,, like big mem, etc... ... ... ...
.......... I honestly just copy that section over into -- mctweaker init.d settings -- which carries all the other tweaks i need and use... And it works... see Below
As well as plenty other programs
"Devil Kernel Manager" does work ,,, Some setting, though, do not stick across a reboot
and
I prefer to Use
"mcTweaker ® root" program I can set pretty much all the stuff that "devil kernel config" would normally let you do,,, and scripts auto run on reboot
...only things I dont see with mctweaker are No :Ram Settings = Xl/Big Mem :: :: Live OC :: :: but it has a few other things you can tweak and set that I really like...
not to mention
"ROM Toolbox Lite " is excellent with the stuff available in it...
I also prefer to Use
Aokp Performance Settings - Standalone Version
http://d-h.st/eRG
PerformanceControl.apk
I also found this nice Lulzactive controls app
1: explains things better
2: offers quick access
3: from the developer
https://play.google.com/store/apps/d...rak.lulzactive
and these work great too:::
,,, I've personally tested all of them ,,,
available from the play store
Some don't offer full functionality and capability but do allow you to set most all settings offered
::: titanium tweaker :::: greenblob :::: nstools :::: Trickster Mod
My Personal Favorite Devil settings are
100 - Min
1300 - Max
Lulzactive - Governor
Zen - I/O Scheduler
and SD read ahead 1024
I face serious lags with GOSMS PRO....the messages which arrive during lag period never get displayed...it gets deleted automatically...I'm on rooted,deodexed JIT enabled,zipaligned,lagfix applied JPM......earlier was on JP2 thinking its the problem of ROM but now it has increased even to calls...i get to see a black screen for about 10 seconds the only it displays who's callingwhat to do???HELP PLEASE
coolpkp690 said:
I face serious lags with GOSMS PRO....the messages which arrive during lag period never get displayed...it gets deleted automatically...I'm on rooted,deodexed JIT enabled,zipaligned,lagfix applied JPM......earlier was on JP2 thinking its the problem of ROM but now it has increased even to calls...i get to see a black screen for about 10 seconds the only it displays who's callingwhat to do???HELP PLEASE
Click to expand...
Click to collapse
U using fugumod kernel right??
then use SetCPU...change governor to Ondemand...
if u feel u still getting lag then change min freq to 166....
hope this solves your problem
dharammaniar said:
U using fugumod kernel right??
then use SetCPU...change governor to Ondemand...
if u feel u still getting lag then change min freq to 166....
hope this solves your problem
Click to expand...
Click to collapse
but do i need to do these things even for a non oc kernel?
coolpkp690 said:
but do i need to do these things even for a non oc kernel?
Click to expand...
Click to collapse
for a non oc kernel i dont think so...
dharamg3 said:
for a non oc kernel i dont think so...
Click to expand...
Click to collapse
then how to get rid of these lags...i did everything using your kitchen & clean ROM....
coolpkp690 said:
then how to get rid of these lags...i did everything using your kitchen & clean ROM....
Click to expand...
Click to collapse
Still can u try once using setcpu?? Coz i feel maybe the kernel is built that way...please test and try...
I just switched to Miui, and battery isn't that great so, does anyone know a better kernel for Miui!? Please help! Thanks.
Sent from my T959 using xda premium
Now, the MIUI rom itself comes in many varieties. From what I hear the Prime or Lithium versions of MIUI preserve battery better then stock MIUI or MIUI.us.
Kernel wise however Bali-CM 2.2.2 and Glitch v13 are your best bet. Personally I use Glitch because it is much more stable, smoother, and faster then Bali. Plus Bali is no longer being updated while Glitch is still in development. Still you should try out both and see which suits your personal taste best.
Also, remember to undervolt (in SetCPU), as that should further increase battery life without loss of performance. "Screen off" profiles in overclock apps like SetCPU also help in battery conservation.
Another thing. Don't forget that our Vibrant's screens are huge power drainers. Keeping it on a lower brightness level helps save a lot of battery.
An app that really helps battery life is called Juice Defender Plus. You should try it out! Here's an overview of the app posted by "Woodrube" (he helped me get more out of my battery life with his awesome battery wisdom) that should help you get started...
Woodrube said:
This is how the JD Plus works (no need for JD Ultimate b/c we don't have many of the functions it supports. I just copied this from another thread the OP started awhile ago and I was trying to helps him out there.
If you set it to custom, the go into the settings tab on the right and then all the way at the bottom, there is two buttons to push, The first in Interactive which will pull up Juice Defender for up for any app that isn't already configured and the other is Configure Apps. This is the one that you can customize on an app-to-app basis where if you are no using an app and the screen is locked, it kills the radio/data traffic for that app.
Say you are listening to IHeartRadio, this you would want either Enable or Enable/off (which means the screen will be locked but the radio/data will be working). Now take the browser. It you are not using the browser, then you don't need it transmitting data right? So you would set that one to Enable (which means that it will only enable data traffic when that app is being used).
Juice Defender only works when the screen is locked, don't forget and all widgets are battery drains b/c all they really are is a monitoring app and if it is tied to something like FB or G+, then that data will be running constantly.
Examples:
Gmail = Enable (not enable/off b/c then it will keep your radio/data open)
Beautiful Widgets = Enable/off
mClock/Clockr = Enable/off
Angry Birds = Disable (with this and something like Adfree, no more ads in Angry Birds even though the ads are embedded in the .apk)
SMS/MMS = Enable or Do Nothing (why would you push disable)
Enable = Radio/data on when app is in use (front)
Enable/off = Radio/data on for background apps (when screen is locked)
Disable = Disables radio/data traffic completely when that app is running
Do Nothing = What is says.
I have been using JD+ for over a year on 3 different phones and have noticed a considerable difference in battery life, even on a crappy Motorola phone. Just takes some time to figure out YOUR settings and what YOU like. I have also used it on Stock kernel and had no problems either.
---
Under status I have Profile>Customize (this one lets you configure your apps) Notification> Text
Under settings I have
Mobile and Wifi are both set to Enable,
Options>Auto Disable,
Location>disable,
Schedule>Enable:frequency>1h,
Night>Enable :12am6am (b/c I am asleep but if I am on, user takes priority),
Apps>Enable;
Configure>Interactive.
Click to expand...
Click to collapse
Remember to thank Woodrube for this great overveiw of JDP
Hope this helps get the most out of your battery on MIUI
N00B_IN_N33D said:
Now, the MIUI rom itself comes in many varieties. From what I hear the Prime or Lithium versions of MIUI preserve battery better then stock MIUI or MIUI.us.
Kernel wise however Bali-CM 2.2.2 and Glitch v13 are your best bet. Personally I use Glitch because it is much more stable, smoother, and faster then Bali. Plus Bali is no longer being updated while Glitch is still in development. Still you should try out both and see which suits your personal taste best.
Also, remember to undervolt (in SetCPU), as that should further increase battery life without loss of performance. "Screen off" profiles in overclock apps like SetCPU also help in battery conservation.
Another thing. Don't forget that our Vibrant's screens are huge power drainers. Keeping it on a lower brightness level helps save a lot of battery.
An app that really helps battery life is called Juice Defender Plus. You should try it out! Here's an overview of the app posted by "Woodrube" (he helped me get more out of my battery life with his awesome battery wisdom) that should help you get started...
Remember to thank Woodrube for this great overveiw of JDP
Hope this helps get the most out of your battery on MIUI
Click to expand...
Click to collapse
Thanks for this man!
Sent from my T959 using xda premium
N00B_IN_N33D said:
Now, the MIUI rom itself comes in many varieties. From what I hear the Prime or Lithium versions of MIUI preserve battery better then stock MIUI or MIUI.us.
Kernel wise however Bali-CM 2.2.2 and Glitch v13 are your best bet. Personally I use Glitch because it is much more stable, smoother, and faster then Bali. Plus Bali is no longer being updated while Glitch is still in development. Still you should try out both and see which suits your personal taste best.
Also, remember to undervolt (in SetCPU), as that should further increase battery life without loss of performance. "Screen off" profiles in overclock apps like SetCPU also help in battery conservation.
Another thing. Don't forget that our Vibrant's screens are huge power drainers. Keeping it on a lower brightness level helps save a lot of battery.
An app that really helps battery life is called Juice Defender Plus. You should try it out! Here's an overview of the app posted by "Woodrube" (he helped me get more out of my battery life with his awesome battery wisdom) that should help you get started...
Remember to thank Woodrube for this great overveiw of JDP
Hope this helps get the most out of your battery on MIUI
Click to expand...
Click to collapse
Hey dude, which one should I pick from high leakage, medium leakage, or low leakage!? And what's the difference!?
Sent from my T959 using xda premium
Here is what it means straight from the OP of the Glitch thread...
4)What is Leakage (LL,ML,HL) and what one should i use?
Easy explanation: start with HL. If it allows you to OC how much you want, stay there. If not, move down until you get what you want.
For people who want more: Well, we made different leakages because koflem couldn’t OC, and he felt left out, so he started compiling on his own, which gave Tk-Glitch the idea to make three different versions. They have to do with the differences in different phones. Take for example different phones run better with different OC/UV. The leakages are the same way. They adjust the int voltages, which is something not configureable (yet) in userspace, so we have to configure them that way when we build. That way both the voltages that you are used to (the ones controllable via voltage control) are tailored to your device, as is the int voltages (the ones only we can do). Most people have no idea, but there are dozens of variables that we play with to make so that all of you can OC and UV as much as possible with as much stability as possible. Some aren't device specific, some are. We are trying to make the best experience possible for a wide range in chip quality, therefore we make different leakages, as well as making the kernel configurable via voltage control. From a stability/performance standpoint, and by extension standpoint, there is only one leakage right for your device. Different leakages aren't better in some ways for you and worse in others, there is only one good one for your device. Sorry if that didn't make sense, I tried to make it as informative as possible without it being overwhelming.
Click to expand...
Click to collapse
Now, first of all make sure you install v13 not v12 of Glitch. Here's a link to v13. To change the leakage in v13 do as follows...
-Boot into Recovery
-Go down to "Glitch" and select it
-Go to the Leakage section and select it
-You should be presented with High, Medium, Low
-Choose which leakage you want and reboot
If you have anymore questions feel free to ask.
Alright, I flash this kernel like I flash any other kernel right? And what are the differences between high, low and medium?
Sent from my T959 using xda premium
Flash like a normal kernel, yes.
To be straight out honest I'm not 100% positive on the differences. But from my understanding High leakage works on most Vibrants, while Low works on the few better made phones. Just start with high then try medium (which is what I use). Most likely you won't be stable on low, however, if you're stable on medium then move down to low. The more detailed answer is already posted above.
These are great suggestions but for me personally my phone won't go into deep sleep after a charge unless I reboot it, so just rebooting my phone every morning gets me to about 18 hours on a charge
Sent from my T959 using XDA App
N00B_IN_N33D said:
Here is what it means straight from the OP of the Glitch thread...
Now, first of all make sure you install v13 not v12 of Glitch. Here's a link to v13. To change the leakage in v13 do as follows...
-Boot into Recovery
-Go down to "Glitch" and select it
-Go to the Leakage section and select it
-You should be presented with High, Medium, Low
-Choose which leakage you want and reboot
If you have anymore questions feel free to ask.
Click to expand...
Click to collapse
Hey dude, I didn't find any leakage option. I flashed it but can you tell me where I can find a leakage option?
Sent from my T959 using xda premium
If you flashed v13 and then did a reboot this is how you change the leakage...
-Boot into Recovery (It will be red)
-Go down to "- GLITCH" and select it
-Go to "- Configure Leakage Settings" and select it
-You should be presented with...
> - low
> - medium
> - high
-Choose which leakage you want and reboot
N00B_IN_N33D said:
If you flashed v13 and then did a reboot this is how you change the leakage...
-Boot into Recovery (It will be red)
-Go down to "- GLITCH" and select it
-Go to "- Configure Leakage Settings" and select it
-You should be presented with...
> - low
> - medium
> - high
-Choose which leakage you want and reboot
Click to expand...
Click to collapse
Thanks! Got it and I set mine to high !
Sent from my T959 using xda premium
L1LK1LLERZ said:
Thanks! Got it and I set mine to high !
Sent from my T959 using xda premium
Click to expand...
Click to collapse
Sounds good. Hope you enjoy it
Feel free to ask me any questions if needed
N00B_IN_N33D said:
Sounds good. Hope you enjoy it
Feel free to ask me any questions if needed
Click to expand...
Click to collapse
Thank$ man! You rock!
Sent from my T959 using xda premium
L1LK1LLERZ said:
Thank$ man! You rock!
Sent from my T959 using xda premium
Click to expand...
Click to collapse
No prob. I'm glad to help. Just remember, "If I have helped you please tap on that neat little button down there labeled 'thanks' ↘"
Hey man.. but I got another problem now, my softkeys lights go on when I get a new message and when my phone is locked and won't turn off until I check the message! Anyways to turn that off?
Sent from my T959 using xda premium
N00B_IN_N33D said:
No prob. I'm glad to help. Just remember, "If I have helped you please klikety-klak that 'thanks' button ↘"
Click to expand...
Click to collapse
U N00B! do NOT steal PhillyD's catch phrase!
xriderx66 said:
U N00B! do NOT steal PhillyD's catch phrase!
Click to expand...
Click to collapse
Jeez, I apologize I honestly had no idea that someone else used that signature. I don't even know who "PhillyD" is, couldn't even find him in a Google search either... I'll change it however I honestly didn't "steal" it.
---------- Post added at 06:07 AM ---------- Previous post was at 05:58 AM ----------
L1LK1LLERZ said:
Hey man.. but I got another problem now, my softkeys lights go on when I get a new message and when my phone is locked and won't turn off until I check the message! Anyways to turn that off?
Sent from my T959 using xda premium
Click to expand...
Click to collapse
If you have the BLN app installed then uninstall it. Or you could try going into settings, click the settings soft key, search, type "led notifications", click led notifications, and then turn it off. Try that and see if that helps.
N00B_IN_N33D said:
Jeez, I apologize I honestly had no idea that someone else used that signature. I don't even know who "PhillyD" is, couldn't even find him in a Google search either... I'll change it however I honestly didn't "steal" it.
---------- Post added at 06:07 AM ---------- Previous post was at 05:58 AM ----------
If you have the BLN app installed then uninstall it. Or you could try going into settings, click the settings soft key, search, type "led notifications", click led notifications, and then turn it off. Try that and see if that helps.
Click to expand...
Click to collapse
.. i was joking man. sorry you took me seriously
p.s. phillyd, http://www.youtube.com/user/sxephil
N00B_IN_N33D said:
Jeez, I apologize I honestly had no idea that someone else used that signature. I don't even know who "PhillyD" is, couldn't even find him in a Google search either... I'll change it however I honestly didn't "steal" it.
---------- Post added at 06:07 AM ---------- Previous post was at 05:58 AM ----------
If you have the BLN app installed then uninstall it. Or you could try going into settings, click the settings soft key, search, type "led notifications", click led notifications, and then turn it off. Try that and see if that helps.
Click to expand...
Click to collapse
I don't have any BLN app and yes, I tried tthat but it still happens !
Sent from my T959 using xda premium
This app allows you to control your CPU voltages with an easy to use interface. You can increase or decrease voltages (undervolt or overvolt) for all frequencies or fine tune voltages for each individual frequency.
! HTC DEVICES !
! ROOT is Required !
! Kernel that supports HAVS or SVS voltage adjustment REQUIRED !
In addition, if you are an Incredikernel user, the app may also be used to toggle Incredikernel specific features on and off, namely USB fast charging and audio boost.
Get it over at http://www.incredikernel.com
IncrediControl is now also available in the market:
IncrediControl (If you have a dual core CPU do not use the market version until v1.5 final is released)
IncrediControl - Ad Free
Additionally, all donators are eligible to receive the Ad Free version. It doesn't matter how much or how little you donate or have donated. If you don't want to purchase the app from the market, you may donate using the button on this page. Please register on the site first and include your username in the comments box.
All previous donators, please register on the site if you have not done so and contact me with your username!
NOTE: It is a requirement of the HAVS adjustment that the kernel you are using has the HAVS sysfs interface implemented. If it does not, it will not work.
NOTE2: Before using, please delete any boot scripts you may have in /etc/init.d that toggle any of the settings this app controls.
Get it at http://www.incredikernel.com
Restore script - use this if you went too low and find yourself in a boot loop. Flash through recovery:
http://www.incredikernel.com/?p=229
IncrediControl v1.5 beta1:
This is an open beta of the latest IncrediControl. Changes include:
Dual core snapdragon(msm8x60) support
CPU frequency adjustment
Ability to tweak various CPU governors
Numerous bug fixes
Please test and report any bugs in the forum. I have not yet implemented the ability to set governor settings or CPU frequencies on boot. This will be implemented before the final release so please do not report this as an issue.
http://www.incredikernel.com/?p=419
IncrediControl v1.5 beta2:
Fixed compatibility with some msm8x60 kernels
http://www.incredikernel.com/?p=422
IncrediControl v1.5 Beta3:
Ability to set cpu and governor settings on boot
Updated support for Incredikernel Rezound
http://www.incredikernel.com/?p=430
Any chances of a kernel to go along with this? Ziggy's didn't like my phone and I always liked your's on my old incredible
sent from my newly unlocked Rezound
Using Ziggy's kernel. App works good, but FCs on click of the SVS portion? hmm
Izeltokatl said:
Using Ziggy's kernel. App works good, but FCs on click of the SVS portion? hmm
Click to expand...
Click to collapse
It might be a permissions thing. I tested on my own internal build. I'll look into it.
New beta posted that fixes compatibility with ziggy's kernels.
Thanks
Thanks for releasing app so fast Chad.
I enjoyed your work on my Incredible and I look forward to your work on the Rezound.
The app makes my life easier, and I've been tweaking it down bit by bit to see how much I can get this phone to sip.
Do you have any plans to do kernels? I'm using Ziggy's which seems to be running fine now (although i had a reboot earlier, but who knows why that happened).
I ran just your kernels religiously on my Incredible and enjoyed the performance and stability.
Regardly, thanks again for all the work you do bro.
Works great!
I would recommend for the Rezound screen size to make the buttons a tad wider. They are rather tiny on this screen and sometimes when i click the voltage adjustment button I click on the value input and go into keyboard entry mode. I have rather smaller hands so i would imaging its more annoying for bigger people.
other than that, great job.
Awesome app. I didn't know you had incorporated cpu controls into it
sent from my newly unlocked Rezound
is the default setting the default setting for HTC Rezound without ANY modification?
dccoh said:
Thanks for releasing app so fast Chad.
I enjoyed your work on my Incredible and I look forward to your work on the Rezound.
The app makes my life easier, and I've been tweaking it down bit by bit to see how much I can get this phone to sip.
Do you have any plans to do kernels? I'm using Ziggy's which seems to be running fine now (although i had a reboot earlier, but who knows why that happened).
I ran just your kernels religiously on my Incredible and enjoyed the performance and stability.
Regardly, thanks again for all the work you do bro.
Click to expand...
Click to collapse
I get random reboots on Ziggy's no matter what governor and clock speed.
It wipes dalvik cache when it happens too.
If i do a set cpu stress test, and let it sit there, eventually the freeze/reboot happens.
Something about how it's written.
pkopalek said:
I get random reboots on Ziggy's no matter what governor and clock speed.
It wipes dalvik cache when it happens too.
If i do a set cpu stress test, and let it sit there, eventually the freeze/reboot happens.
Something about how it's written.
Click to expand...
Click to collapse
I get it random reboots too, I tried many ROMs out and i still get them. The conclusion I get from it is that we have bad chips.
Ziggy mentioned it had something to do with the cache getting corrupted. Im wondering if regularly clearing it would prevent bootloops from happening
sent from my newly unlocked Rezound
pagereborn said:
is the default setting the default setting for HTC Rezound without ANY modification?
Click to expand...
Click to collapse
The default voltages are whatever the kernel default voltages are.
Sent from my ADR6425LVW using XDA App
Hey Chad, I shot a pm your way.
Can I download these from my computer, transfer to my sd card and go, or do I have to boot it into recovery and go through another process, thanks in advance.
You install them side loaded. no flashing
Sent from my ADR6425LVW using XDA App
dccoh said:
Hey Chad, I shot a pm your way.
Click to expand...
Click to collapse
Back at you
Izeltokatl said:
You install them side loaded. no flashing
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
Will they show as an app? I am running ziggys kernel, have installed this a couple of times and nothing ever shows up, what should I do?
Anyone know what's the default setting for rezound without any modifications?
Sent from my ADR6425LVW using xda premium
These thead has been moved to another forum by the owner:
http://forum.xda-developers.com/showthread.php?t=3319469
why the hell this post on Development forum?
It shud be on general user forum.
---------- Post added at 03:01 PM ---------- Previous post was at 02:24 PM ----------
u don't need to do thiss lot craps to make it smooth.
Delete bloats and use greenify it will get smooth by itself.
Dark Knight Begins said:
why the hell this post on Development forum?
It shud be on general user forum.
---------- Post added at 03:01 PM ---------- Previous post was at 02:24 PM ----------
u don't need to do thiss lot craps to make it smooth.
Delete bloats and use greenify it will get smooth by itself.
Click to expand...
Click to collapse
1st of all is with 512 RAM space it impossible to keep hibernate all the apps with greenify and not even the apps downloaded. I've tried every bit of it.
2nd think is there is no blotwares on these phone.
rajarshi kundu said:
1st of all is with 512 RAM space it impossible to keep hibernate all the apps with greenify and not even the apps downloaded. I've tried every bit of it.
2nd think is there is no blotwares on these phone.
Click to expand...
Click to collapse
what do u mean by cant hibernate
apps?
Dark Knight Begins said:
what do u mean by cant hibernate
apps?
Click to expand...
Click to collapse
It means the apps always wakes up inspite of forced to hibernate.
rajarshi kundu said:
It means the apps always wakes up inspite of forced to hibernate.
Click to expand...
Click to collapse
apps never wakes in boost mode.
what setting u used?
Dark Knight Begins said:
apps never wakes in boost mode.
what setting u used?
Click to expand...
Click to collapse
I'm using root mode.
rajarshi kundu said:
I'm using root mode.
Click to expand...
Click to collapse
blah.
why??
get xposed
Dark Knight Begins said:
blah.
why??
get xposed
Click to expand...
Click to collapse
ok Im installing it just right now.
:thumbup:
I have no idea why the v5 of this kernel makes my phone slow as ****. While the v2 works great.
I noticed two things while using the v5 kernel. First, is that when you use tap 2 wake (set on boot) and reboot you phone and keep it idle (don't touch anything) after about 10 minutes the touch screen won't work at all and you must reboot again and use the touch screen right away or you will face the same problem. Ps, the problem happens too if you idle for a long time (like when you sleep at night and you wake up to find touchscreen frozen). Second problem is that the overclocking is probably doesn't work at all. When I set it to smartass or any other the clock speed always stays at 1k while if I change it to ondemand it goes up to 1600 but the phone get slow af.
Stanwar said:
I have no idea why the v5 of this kernel makes my phone slow as ****. While the v2 works great.
I noticed two things while using the v5 kernel. First, is that when you use tap 2 wake (set on boot) and reboot you phone and keep it idle (don't touch anything) after about 10 minutes the touch screen won't work at all and you must reboot again and use the touch screen right away or you will face the same problem. Ps, the problem happens too if you idle for a long time (like when you sleep at night and you wake up to find touchscreen frozen). Second problem is that the overclocking is probably doesn't work at all. When I set it to smartass or any other the clock speed always stays at 1k while if I change it to ondemand it goes up to 1600 but the phone get slow af.
Click to expand...
Click to collapse
Thanks 4 pointing that.
1)This kernel is kinda old and for stock based roms.
A time corphish thought there won't be any possible overclock on spreadtrum kernel.
So,he made it and cpu_freq_driver wasn't okay then.
That's why overclock won't work.
2)V2 is the oldest version after initial release, where many things was fixed.
After than corphish imported a lot of features and stuffs and things got messed up(I guess).
3)everybody knows we sgsd users moved on to cyanogenmod 10,11 and 12 with updated selinux enabled recoveries. So,nobody cares about stock now.Coz we have real over and underclocking cpu frequency driver by psych.half in almost complete cm 11.
4)If u feel better by using stock then I suggest u to use stock mod kernel.
4)
Dark Knight Begins said:
Thanks 4 pointing that.
1)This kernel is kinda old and for stock based roms.
A time corphish thought there won't be any possible overclock on spreadtrum kernel.
So,he made it and cpu_freq_driver wasn't okay then.
That's why overclock won't work.
2)V2 is the oldest version after initial release, where many things was fixed.
After than corphish imported a lot of features and stuffs and things got messed up(I guess).
3)everybody knows we sgsd users moved on to cyanogenmod 10,11 and 12 with updated selinux enabled recoveries. So,nobody cares about stock now.Coz we have real over and underclocking cpu frequency driver by psych.half in almost complete cm 11.
4)If u feel better by using stock then I suggest u to use stock mod kernel.
4)
Click to expand...
Click to collapse
Yeah.
Dark, u r really right. working really fine with stock mod. Even smooth than zapdos v2. Just tweaked the low memory killer and using seeder and gerrnify boost mode (as u suggested). Now it is smoother than ever.