Related
Greetings,
I have two Vibrants - one I bought from TMobile (and running stock everything), and one I later bought on eBay (running Froyo thanks to TeamWhiskey). I bought the second phone so that I could mess around with flashing ROMs and be able to brick a phone without it mattering. Hah.
Last night, for no reason I can discern, my stock TMobile Vibrant phone spontaneously soft bricked itself. My eBay test phone is fine.
I don't hugely care WHY the Tmobile phone bricked itself, but what I do care about are the pictures that are on the internal storage area.
I used Odin last night to flash in T959UVJI6.tar (but I did NOT use the 512.pit file). One of the posts I read said that doing so should fix a soft brick, without messing up the internal user storage area where pictures are located. No change - when I power on the Tmobile phone it hangs at the Galaxy S logo and then goes black.
Does anyone have any suggestions of how to access the internal storage area of a soft bricked Vibrant? And/or, can someone explain or point me at an explanation of what impact using a PIT file (vs not) and checking the "reformat" box in Odin (vs not) will have on the internal storage area? I don't care about overwriting the apps - I am just hoping there is some way to pull off the pictures or unbrick the phone WITHOUT deleting them.
Many thanks!
Wrong section..probably going to get flamed. Odin again with the pit file and you still wont lose pics and stuff. But next time...Q and A section...not being a ****, but that's where you ask all your questions.
sent from the other side of my galaxy.
jmercil said:
Wrong section..probably going to get flamed. Odin again with the pit file and you still wont lose pics and stuff. But next time...Q and A section...not being a ****, but that's where you ask all your questions.
sent from the other side of my galaxy.
Click to expand...
Click to collapse
Thanks for the reply. Is there some way I can move my post to the Q&A section? Or is that something only a Mod can do?
Also, do I check the reformat box or leave it unchecked?
Thanks again.
noise said:
Thanks for the reply. Is there some way I can move my post to the Q&A section? Or is that something only a Mod can do?
Also, do I check the reformat box or leave it unchecked?
Thanks again.
Click to expand...
Click to collapse
No need to reformat.
That's only for special occasions, really. And yeah, as far as I've seen, only mods can move posts.
yeah i would also like to know to that. the other day i deleted the 3d gallery app apk odex files because it was annoying the hell out of me with it's referenced folders - i tried clearing the default folder and but it was still showing random pictures from the shutdown folder and where ever else - so what did i do? i backed up the apk and odex file then deleted them from the system folder. rebooted w/o any issues - then i tried installing the apk... nothing - kept giving me a failed app install notification. i tried this 3-4 times then gave up. at this point i restored the apk/odex file to the system folder and rebooted the phone - nothing... gets past the galaxy s animation screen then screen goes black... nothing....
tried multiple reboot and keeps getting to the same black screen of doom - the other odd thing is windows do recognize it after it gets past the galaxy s boot screen and into the blank screen when i check in the device manager
ADB pull /sdcard/"whatever u have on ur phone"
Learn ADB
Reading is Fundemental
I'd also like to know if there are anyways to access the internal memory of a soft bricked phone. I know I can use ODIN, but I could fix the problem right now sans computer or USB if Clockwork recovery could access my sd card; I flashed a new kernal on stock JI6 and apparently needed to to flash a backsupport.zip first.
So, I don't have a cable with me, so can't use ODIN, clockwork recovery doesn't restore kernals and doesn't access the SD so... I'm screwed until I get home (not a huge deal). Alternatively, I could also not get clockwork to USB mount so I don't think that works either.
boimarc89 said:
ADB pull /sdcard/"whatever u have on ur phone"
Learn ADB
Reading is Fundemental
Click to expand...
Click to collapse
lol thanks man. but i also tried that. adb can't recognize it - and i found out it's the hard lock t-mobile version where doing the three button power up does not get you into the recover screen. unless i read that wrong? lol
Update: I used Odin again, this time with both the TAR and the PIT file. Same result as last time. Odin appears to have completed copying everything over successfully, but upon reboot, I still get the soft-brick Galaxy S that doesn't go away.
I didn't try ADB earlier because all the posts/various docs I read thus far seemed to imply that ADB needed a normally functioning phone - not one that got stuck at the Galaxy S logo. I was wrong.
Here's what I did, hope it helps someone else. [Commands below assume you're using windows, and want to copy the entire contents of the internal SD memory (called "/sdcard") on your PC that you created (e.g., "c:\sdcard"]
1. Install ADB
2. Plug in soft-bricked phone and power on
3. Run command prompt and navigate to the directory where adb.exe is located. In my case, it was C:\Program Files (x86)\Android\android-sdk-windows\platform-tools.
4. From the command prompt:
adb pull /sdcard c:/sdcard
NOTE: the c:/ slash should be as shown - not c:\ as you would normally type under Windows.
392 seconds later, I had all 8G of photos on my PC.
I still don't know why the stupid phone won't boot properly, but now I don't care and can blast everything away. Thanks to everyone who contributed. Next time I'll be sure to post in Q&A instead.
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
Today I tried to flash the CyanogenMod 9 Nightly 06-30-12, coming from Build 35 of AOKP and after factory resetting and clearing Dalvik I went to install the zip and while flashing it I got a build-prop related error!
All of my NANDROIDS gave me a data error when flashing and now I am pretty f'd! I /really/ need to fix this ASAP but have no idea how.
-Samsung Galaxy Tab 10.1 Wifi-
-CWM 4-
On a second note, does anywhere know where I can get my screen replaced for cheap? I dropped my tab a few months back and the screen got MAJOR cracked, though it still does technically work (I still use the screen, it works but it's cracked is all...) and after calling Samsung and waiting for over 1 and a half hours they told me they wanted $150 to fix it, which if I recall is about half of what I payed for it anyway...
To be honest, I'd be lying if I said I was happy with Samsung over all.
I mean, bad customer support, the proprietary connection cable, and lack of official updates (along with the ugly TouchWiz that I'm not sure /who/ likes ) don't make me that happy...
Anyway, can anyone help me please?
Thanks in advance!
Update your recovery: http://droidbasement.com/db-blog/?p=2655
If you have a GT-P7510 (p4wifi), in this post are flashable zips (with your current recovery) of CWM and TWRP, in case you prefer this method: http://forum.xda-developers.com/showpost.php?p=28051448&postcount=29
After that, flash your ROM like always.
Yeah, thanks, were it so easy. I fired up ODIN multiple times, no matter what, unsuccessful. Like always, my computer would not recognize my tablet. Yes, I have the bloody Samsung drivers, yes I've tried reinstalling them (several times in the last few months), yes I've tried using different USB ports! And what? Nothing. Nothing at all. For the last few months I have not been able to transfer movies/music to my tablet via file transfer and I can't even get the stupid odin download thing to work. To be honest, I really am pissed off with this broken pile of trash. Would trade it in for a similar tablet any time.
Did you try any of the flashable zips for a new recovery?
About the USB, it sounds like a different problem, but for the file transfers, are you sure you have MTP selected? (answer #5 --> http://forum.xda-developers.com/showthread.php?t=1642009 )
If you haven't tried it yet, you could use a different computer, another OS (some Linux distro and check that adb works), change the USB cable.
I can't use a flashable zip since I can't copy files onto the tablet >.>
Also, yes, for file transfers I /do/ have MTP selected always and it doesn't work eitherway.
Essentially, I am stuck with a $300+ ugly and broken thing that I can only use as a paperweight for the huge mess I call my desk. Yay.
>Rage sidenote; Samsung, go take the money I payed for **** and shove it.
And I guess you don't have your old ROM (AOKP build 35) in your tab.
Try with adb (in recovery), but if you can't get a working USB connection (using other computers or OS), maybe there's something physically wrong with your tablet.
No, I don't. I'm stupid enough to delete the ROM zip after flashing it to save space on the tablet...
How do I do this ADB thing? I've heard of it before alot but never used it or looked into it...
Read this: for windows -> http://forum.xda-developers.com/showthread.php?t=1387527 , for Ubuntu -> http://forum.xda-developers.com/showthread.php?t=921169
After everything is installed, boot your tablet into recovery and try running in your command line application (CMD for windows):
adb devices
If it shows that a device (and ID number and the actual state, e.g. recovery) is connected, your golden!
If you have another android device, try it too, to be sure that is working.
To transfer a file the command is
adb push /path/to/file /path/in/tablet
In windows I guess is something like this:
adb push C:\path\to\file /path/in/tablet
so I'd do something like
adb push C:\ADB\CWM-5.5.0.4-p4wifi.zip mnt/sdcard/ ?
Im dling the ADB files right now
adb push C:\ADB\CWM-5.5.0.4-p4wifi.zip /mnt/sdcard/
You need the slash at the star and end of the path of the tablet.
While installing PdaNet it failed, said it couldnt connect through to the device or w/e
Also,I don't recall having ADB on when I had the tablet. I might've but I don't think I kept debugging on for the general time...
This is so frustrating >.>
I'm not sure about that error in PdaNet, I can help you with adb but I don't use Windows, so there's things I can't test.
If you didn't select ADB debugging in your ROM it doesn't matter, you're doing this from recovery.
BTW, do you have other android device?
adb seems to be working and copying, but I can't find the file in Recovery while doing choose a zip to apply!
Yes, I have an LG Optimus V on Virgin Mobile running tdm's AMAZING Quattrimus Alpha 10 on Ice Cream Sandwich/ Android 4.0.4
this is what I get
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>adb devices
List of devices attached
43C800340009517 recovery
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>adb push C:\CWM-5.5.0.4-p4wifi.zip
43C800340009517\sdcard\download
1328 KB/s (4147569 bytes in 3.048s)
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>
If you connect your phone and execute
adb devices
What's the output?
If you do the same with your tablet, what's the output?
with the tablet it's
C:\Users\Mikoyan Gurevich\Desktop\LG Drivers>adb devices
List of devices attached
43C800340009517 recovery
with my phone it doesn't wanna show up in Recovery or not.... Hmm.
Well, it shows fine, then you should be able to transfer the files
First, in your recovery, go through the steps to install some zip file, but just go as far as selecting the directory, then go back
Now in your PC try running something like this, change your path in windows:
adb push C:\CWM-5.5.0.4-p4wifi.zip /sdcard/
The in your recovery, select install and should show there. The thing is that most likely the sdcard wasn't mounted in your tab
Edit, to mount your sdcard in recovery do: mounts and storage > mount /sdcard > Go back
The do the transfer in your PC.
Hmm
While I was holding it to my gut, pushing the end of the cable into my stomach (It was the only way to get it to be recognized) I fooled around and went into download mode, hoping that on the contrary I could do that, turn it off, and when I went back into Recovery it would be there when it finally said the cable WAS connected and then I rushed to open Odin and wrote it through, and it frickin' wrote CWM v5 right on and it worked, I'll be damned!
Maple, I can not thank you enough for helping me with this, I am in great debt.
You're welcome, I'm glad it worked. Knowing how to use adb is really useful. And now you know that something is wrong with your cable.
Or in the connector pins or w/e of the tablet... The cable works fine for charging though....
You are my savior, bro.
Hi all.
I've just installed some app that broke down my S3 stock OS.
The OS was rooted, and I gave the crappy app superuser access...
It was supposed to change the DPI setting, but now it's boot-looping over the Samsung logo.
Now I'd like to recover my data, photos and stuff...
CWM Recovery 5.5.0.4 is installed.
I can start a backup, but it won't complete since I don't have a large enough SD card at hand (it's a 32 GB SGS3 with a bunch of large videos...).
I don't care about the movies, just the photos, but there's no option for a selective backup...
I also tried updating CWM to a more recent release with Odin (downloaded .img and tar'ed it...), but it won't go further than SetupConnection.
I've not tried a factory reset of anything else yet...
Is there a way I can still recover my data, or should I just get over it and try to flash the whole thing back with Odin?
Thanks for your help.
Adb backup?
maybe reinstalling the ROM can fix it ?
The other thing you can try is adb pull /build prop, edit LCD density back to 320 and adb push it back
Thanks for your answers.
adb looks like the way to go, but I never managed to get it working on my computers.
"adb devices" won't list any, "adb shell" returns "error: device not found".
USB debugging was enabled in the OS.
Is the phone supposed to be in recovery mode or download mode? None works... (Also tried with the OS running before it started crashing)
Is there a setup guide somewhere?
Actually, working with Android on Windows (XP x64) has been a total nightmare so far.
On my main computer, Device Manager loops forever on device detection / driver installation, and successive driver installation/uninstallation/reinstallation mangled WMP10 completely (and since it's tied to Windows, I can't reinstall it).
On other computers, driver installation went fine, I hardly managed to copy movies to the phone through MTP / WMP, and never managed to copy anything back.
I only ever managed to move files over wifi, but that's at wifi speed, not USB2 speed...
And now that I gave Kies a try (stayed away from it so far), it keeps eating 100% CPU whenever I run it.
I had that adb problem then I installed android command centre, and bam, it worked! Will try and find link for you....brb
Finally managed to run adb on the computer with Kies installed.
I'll look into this.
Here go
http://forum.xda-developers.com/showthread.php?p=36671130
Can't use adb pull/push anymore: in a previous attempt to reduce the nandroid backup size, I formated the system and cache partitions.
Then I managed to run a full backup with CWM Recovery, but can't find my files in there.
The backup files only contains application data, but the sdcard folder is totally missing.
Well, it appears the problem indeed was in build.prop.
My backup has 2 files: build.prop.bak and buid.prop.temp.
.bak has the old density, .temp has the new value.
Somehow the app failed to rename build.prop.temp to build.prop, and made the system unbootable.
adb backup won't work either: it's waiting for a confirmation on the phone, and doesn't seem to work in recovery mode.
Now browsing /data/media with adb shell !
I had to mount /data manually (in recovery), I guess the same is true for a recovery backup, and that's why I couldn't find my files.
Think I'll manage to get it all back now.
Thanks a lot slaphead20.
I was just about to wipe away all these family pictures!
Nico57m said:
Now browsing /data/media with adb shell !
I had to mount /data manually (in recovery), I guess the same is true for a recovery backup, and that's why I couldn't find my files.
Think I'll manage to get it all back now.
Thanks a lot slaphead20.
I was just about to wipe away all these family pictures!
Click to expand...
Click to collapse
FYI TWRP will not wipe ur sd when u do factory reset
but ur problem not with data its with system and u can fix it simply by reflashing the u r using without any wipe
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Wifi and OTA updates were working fine before I rooted my kids' Nabi 2. I never tried an OTA update until after I rooted them, which doesn't work (I tried 2.1 since it said it was available). I followed the directions at http://forum.xda-developers.com/showthread.php?t=2041224 and it worked great to restore to stock 1.9.12, but wifi doesn't work now (mine could have been 1.9.37 originally). I tried the "wifi fix" mentioned, but there are still no wifi networks displayed like there were earlier today. I do not have a micro SD card to install the updates from, as mentioned in the replies. If I were to buy one, can I just put the OTA updates from http://forum.xda-developers.com/wiki/Fuhu_nabi_2 on it, and install from it somehow?
I tried to copy fuhu_nabi2_138139_1937_ota.zip to the device and install through the recovery kernel, but got an "assert failed" error. Any ideas as to what can be done to at least update this to 1.9.37, or maybe do a "stock install" of 1.9.37 instead of 1.9.12 so I have a better chance of wifi working? Please be specific as to what I need to try and in what order...some of the tools I tried seem to be inconsistent in results (Nabi Lab was latest I used). I am comfortable using what t499user has to go back to 1.9.12, I just wish I could use the same method to go to something newer...
I had the wifi problem this past spring. I backed up all my apps and data then flashed back to stock with NabiLab. Re-rooted and all was fine again.
You should also be able to use TWRP to flash back to stock. See TWRP thread http://forum.xda-developers.com/showthread.php?t=2074501
Some more info that may help http://forum.xda-developers.com/showthread.php?t=2248495
This experience is only my second time with TWRP and updating the Nabi. I've previously tried reverting to the backup in the "stockunrooted" folder, which is where I think the original was. I now recall that this had been updated to 2.0 using OTA before it was rooted.
Using TWRP, I tried reverting back to stockunrooted just now. Wifi works again, but OTA still does not (2.1 downloaded and seemed to install quicker, but upon reboot all I saw was "an error installing" message and it went directly to TWRP (where I just rebooted and it went to the Nabi screen). I am not sure what else to try. There is also an "oem" folder available for restore in TWRP, but that is the one created using t499user's process to go to 1.9.12. I initially used t499user's tutorial because I thought maybe something was wrong with the stockunrooted backup.
I have a few questions. Is updating TWRP to the latest version important? If yes, how do I do that (I've seen http://forum.xda-developers.com/showthread.php?t=2074501 before, but still not sure how to download/install 2.6.1.0)? If this has been reverted to "stock" and OTA updates still don't work, how do I apply them manually (from http://forum.xda-developers.com/wiki/Fuhu_nabi_2)?
I just noticed that the "stockunrooted" backup has things that aren't stock. Internal Storage has an Android folder with com.google.apps subfolders, etc. I am back to the original problem, and that is going to "stock" (something other than 1.9.12).
Cool, I figured out how to install 205to210.zip (TWRP 2.3.3.0)...For anyone interested, I copied the zip to Nabi/Internal Storage/TWRP, booted while holding +, pressed - to 'recovery kernel,' pressed + to choose it, then chose install. There is one more update I tried (2127stock.zip), but I get a flash error and it did not install. Considering (so far) I cannot get back to "stock unrooted" and use OTA updates, does anyone know how I can install this?
Wait...maybe there isn't another update. http://forum.xda-developers.com/wiki/Fuhu_nabi_2 has "Update 2.0.5 to 2.1.27" as the latest. I think it is working OK. Back to my original question(s), what is the process to install an updated version of TWRP and a "stock version" of something other than 1.9.12? Just trying to get the whole process understood...If I can simply use t499user's tutorial with different images, that would be rad to the max.
brentford said:
Wait...maybe there isn't another update. http://forum.xda-developers.com/wiki/Fuhu_nabi_2 has "Update 2.0.5 to 2.1.27" as the latest. I think it is working OK. Back to my original question(s), what is the process to install an updated version of TWRP and a "stock version" of something other than 1.9.12? Just trying to get the whole process understood...If I can simply use t499user's tutorial with different images, that would be rad to the max.
Click to expand...
Click to collapse
Yes its probably wise to update to TWRP 2.6.1.0. Get the file
Download
Follow "Method 3" here
http://forum.xda-developers.com/showthread.php?t=2074501&highlight=nabi
As for getting a stock image. You were using the zips here http://forum.xda-developers.com/wiki/Fuhu_nabi_2
You dont "Install" those zips. You need to extract the contents. boot.win, system.win, etc. and put them in the TWRP folder.(TWRP/BACKUPS/XXXXXX/folder)
Make a folder called 2127 put the filed in there. Then "Restore in TWRP. Then you should have a stock system. Same goes for 1937stock.zip 205stock.zip
If you have questions ask away.
Thank you all! I think I am getting it. Since I am reading (and had first hand experience) that Google Play isn't working very well with 2.1.27, I will go back to 2.05. That should keep the kids happy. I will let you know if I have more questions.
Oops...I broke something. I have two Nabis. I accidentally restored one using the device ID path of the other. I used "adb push c:\nabi\fuhu_nabi2_v1912_system.ext4.win /sdcard/TWRP/BACKUPS/015d2bc264340217/oem/system.ext4.win" for both. The incorrect one booted, but I noticed that the apps aren't the same. I tried to use TWRP again, but it is not recognized by cmd "adb devices" and I get "error: device not found" when trying "adb reboot-bootloader." I also tried whatever restore option there was in the settings, but it is the same result...Any options?
brentford said:
Oops...I broke something. I have two Nabis. I accidentally restored one using the device ID path of the other. I used "adb push c:\nabi\fuhu_nabi2_v1912_system.ext4.win /sdcard/TWRP/BACKUPS/015d2bc264340217/oem/system.ext4.win" for both. The incorrect one booted, but I noticed that the apps aren't the same. I tried to use TWRP again, but it is not recognized by cmd "adb devices" and I get "error: device not found" when trying "adb reboot-bootloader." I also tried whatever restore option there was in the settings, but it is the same result...Any options?
Click to expand...
Click to collapse
Google play won't work with 2.1.27 unless you delete some apps from /system/vendor/apps before installing gapps
As long as you have the bootloader(with the 4 options boot normal, fastboot, recovery kernel, forced recovery) and working USB port there are always options.
So is ADB not working in TWRP or in Android or both? It's probably best to copy boot.emmc.win, data.ext4.win and restore those too since you have done so much stuff. Boot contains you kernel, and data the apps. You will be back to a stock tablet with no game saves or anything so make sure you got off the tablet what you needed
I don't see a /system/vendor folder using TWRP file manager now...is that only when 2.1 is installed? How much do I need to remove, and are there any known problems with gapps in this case?
I fixed whatever problems I had. (Yes, I still have the bootloader.)
I am not that familiar with this, but let me explain what I have done. As before, I was using ADB/fastboot instructions from http://forum.xda-developers.com/showthread.php?t=2041224 (Windows 7). Both tablets' Internal Storage were recognized by Windows, but only the other one (with correct device ID 015d2bc264340217) was recognized when using ADB. That is how I was updating between Nabi 2 versions before.
Tablet 1:
C:\adb>adb devices
List of devices attached
015d2bc264340217 device
Tablet 2 (normally 015d24a7f41c1c15):
C:\adb>adb devices
List of devices attached
At one point, both devices started an endless loop when booting (shows the "Please wait while Nabi initializes" message for a split second and boots again). It may have been something with the way I installed the OTA updates, but I figured that it had to be something wrong with System so I wiped absolutely everything from within TWRP and I followed t499user's instructions for Windows cmd line (for going back to 1.9.12). Everything is good now, but I don't want to upgrade to 2.1 if gapps has any problems...
brentford said:
I don't see a /system/vendor folder using TWRP file manager now...is that only when 2.1 is installed? How much do I need to remove, and are there any known problems with gapps in this case?
I fixed whatever problems I had. (Yes, I still have the bootloader.)
I am not that familiar with this, but let me explain what I have done. As before, I was using ADB/fastboot instructions from http://forum.xda-developers.com/showthread.php?t=2041224 (Windows 7). Both tablets' Internal Storage were recognized by Windows, but only the other one (with correct device ID 015d2bc264340217) was recognized when using ADB. That is how I was updating between Nabi 2 versions before.
Tablet 1:
C:\adb>adb devices
List of devices attached
015d2bc264340217 device
Tablet 2 (normally 015d24a7f41c1c15):
C:\adb>adb devices
List of devices attached
At one point, both devices started an endless loop when booting (shows the "Please wait while Nabi initializes" message for a split second and boots again). It may have been something with the way I installed the OTA updates, but I figured that it had to be something wrong with System so I wiped absolutely everything from within TWRP and I followed t499user's instructions for Windows cmd line (for going back to 1.9.12). Everything is good now, but I don't want to upgrade to 2.1 if gapps has any problems...
Click to expand...
Click to collapse
Before browsing with TWRP file manager you need to go to the "Mount" tab, put an X in system. Then go to file manager.
Probably have to remove around ~50MB, maybe a bit less. Lots of people choose Wings, but obviously Wings is something some kids love. Really depends on the user.
When you flash stock, it often reset USB debugging to off in Android settings, if you flashed data too.
USB debugging is still on. Do you know anything about whether or not gapps has any problems with rooted Nabi 2.1? You have been a great help!
I didn't realize what would happen until it broke, but what I tried to do was remove apk files prior to upgrading to 2.1. I have copies of them on Internal Storage and locally, but I don't see a way to copy them back to /system/vendor/app using TWRP (tried mounting everything except external storage, which isn't selectable; internal storage isn't selectable, located to the right). Is there a way to do it, or do I have to go back to 1.9.12 and start over?
brentford said:
I didn't realize what would happen until it broke, but what I tried to do was remove apk files prior to upgrading to 2.1. I have copies of them on Internal Storage and locally, but I don't see a way to copy them back to /system/vendor/app using TWRP (tried mounting everything except external storage, which isn't selectable; internal storage isn't selectable, located to the right). Is there a way to do it, or do I have to go back to 1.9.12 and start over?
Click to expand...
Click to collapse
The only problem gapps has is there isn't enough room for it with a stock 2.1. You have to remove something.
Mount everything in TWRP. Go to file manager. /data/media is internal storage. You will find your files. Copy them back to /system/vendor/apps. Might have to set permissions.
Thanks! I copied from Windows using adb, but I got the same asset error (two of the files no longer had their original icon, it was default Android icon). That might have been the permissions issue you mentioned. In the future, how do I change the permissions, and what should they be set to? After this, I am done messing with it. Thank you for everything!
brentford said:
Thanks! I copied from Windows using adb, but I got the same asset error (two of the files no longer had their original icon, it was default Android icon). That might have been the permissions issue you mentioned. In the future, how do I change the permissions, and what should they be set to? After this, I am done messing with it. Thank you for everything!
Click to expand...
Click to collapse
You might be out of space again depending on what you copied back and why the icons are blank. Check with
adb shell df (in Android)
Look at system and see how much space you have free.
Or it could be permissions. You can use a file manager in Android such as ES File Explorer or Astro. You need to go to the setting in the app and enable whatever option they have to browse and remount "system" as read/write that will require root and should prompt you to accept. Then you can browse to the directory. You could also use TWRP File manager the same as when you copied files. There is a permissions tab.
I think the permission you want is 0644(for TWRP), or wr-r--r--(for ES). Same thing just different nomenclature.
Similar issue as OP
Hi guys, I have done pretty much the same thing as the OP. The wireless will not turn on or find any networks. I have tried reverse tethering, but have lost root and pretty much any other way to get internet to the nabi 2, so I can update from version 1.9.12. The big problem is I cannot use TWRP because when I boot into recovery and try to get there I get the dead green android guy with the exclamation point error and it hangs there until a hard restart. Any ideas on how to fix this. Is there a way to push an update through the SD card? Any ideas and suggestions would be greatly appreciated. I have already spent more time than I would have liked trying to fix this.
Dead android is stock recovery. You need to reflash TWRP.
Also to get out of the stock recovery just press vol + and - together. Should be am option to reboot. No need to hard power off.
aicjofs said:
Dead android is stock recovery. You need to reflash TWRP.
Also to get out of the stock recovery just press vol + and - together. Should be am option to reboot. No need to hard power off.
Click to expand...
Click to collapse
Well I swear I have tired this, but decided to give it another go and it worked! Got TWRP up and running then ran NabiLab to return to stock 1.9.37. Wireless is working and updating to 2.1 and then will give root a shot and GApps. Thanks for getting back on track!
Howdy folks,
Yesterday, I was the proud owner of a sleek little TCT.Alcatel OneTouch A554C, formally know as a Virgin Mobile Venture running Android version 2.3.5.
It was successfully and surprisingly easy to root by utilizing 2 cool little apps, Ministro and Poot-Debug.
After root, I subsequently downloaded some root tools (eg., Titanium Backup Pro, Superuser Elite, System App Uninstaller).
That was last week.
Yesterday, I got a bit cocky. I needed to clear up some internal memory so I used "System App Uninstaller" to uninstall a few apps. If I remember correctly, the apps were as follows: Google Maps, Google Maps Street View, Calculator, Digital Clock, Setup Wizard, Android Live Wallpaper, Live Wallpaper Picker, Magic Smoke Wallpaper, Music Visualization Wallpaper, and the TouchPal Keyboard French and Spanish Language Packs.
So far so good, right? However, I believe I may have snarfed-up when I uninstalled the Setup Wizard. But I'll get to that in a minute.
Now with Titanium Backup, I moved some apps to the sd card. Included was the stock launcher, Smart Launcher Pro, SPB Shell, AVG Anti-Virus, and Superuser Elite. Then I rebooted through Titanium Backup and I haven't viewed any pornographic material since!
After reboot, the phone got stuck on the final boot animation frame. I panicked, pulled the battery, booted into recovery then rebooted a 2nd time.
This time it booted to the pull-down lock screen. I unlocked and seen:
"Sorry! The application com.android.setup wizard has stopped unexpectedly. Please try again." Along with a "Force Close" option. I forced closed and the screen went black with the exception of the status bar. The phone is still on but otherwise...nada.
When I press the power button, same thing happens: pull-down lock screen, screen goes black. Or sometimes, it will turn on and boot loop.
Major panic time!!! I booted into recovery again and performed a factory reset to no avail.
Another clue to note: I can connect & access the sd card via usb to desktop.
Also, I did have the good sense to backup all apps, system and user, through ES File Explorer and stored them both on sd card and in the cloud via Yandex Disk prior to this bricking fiasco. Now, what do I do with them? I now realize it was possibly a mistake moving all 3 launchers to the sd card. How do I get the stock launcher back to the phone?
Or, should I:
1- Attempt a base rom reinstall or
2- Attempt a custom rom install or
3- Use it solely as a time piece/mass storage device or
4- Throw it very hard and very ******* far away from me!?
I realize this is an obscure little cheap phone but it's the only one I have. Any valid feedback would be greatly appreciated.
You can go to the Play Store on any browser and choose a launcher to install. Or if you have USB Debugging on, you can side load an launcher apk. Or if you install a custom recovery, you can install another rom or sideload an apk there. Or you can flash the original firmware via SP Flash Tool.
Lots of options and none of them need to be throwing it against the wall.
es0tericcha0s said:
You can go to the Play Store on any browser and choose a launcher to install. Or if you have USB Debugging on, you can side load an launcher apk. Or if you install a custom recovery, you can install another rom or sideload an apk there. Or you can flash the original firmware via SP Flash Tool.
Lots of options and none of them need to be throwing it against the wall.
Click to expand...
Click to collapse
Hmmm...Ok, thanks. Dig your username, by the way.
First thing is, install from play store would be possible if I had data service or if I was able to enable wi-fi. I only have calling & texting service on this phone and as for wi-fi, I can't enable it due to the problem of not being able to access the settings menu. All I have when it does boot, and it only fully boots when it is connected to a PC, is the pull-down lockscreen displaying time, date, status bar and the original wallpaper. Pull it down and the screen goes black with status bar still displayed along with time & battery level.
Secondly, USB debugging was enabled prior to all of this but I panicked & performed a factory reset. Don't think it's still on.
And lastly, is installing either a custom recovery, (which, to be frank, I'm just not that savvy) another rom or flashing original firmware even possible without a PC? Because I only have access to a PC without administrative privileges so therefore...no installing exe's without a password. Maybe this program lab will allow me, quite possibly not.
Hell, would I even still have root after a reset/data wipe?
Thanks, anyway, Esoteric Chaos
Off subject: The Joker was an Agent of Chaos. Loved Heath Ledger as The Joker.
Silver Rivers said:
Hmmm...Ok, thanks. Dig your username, by the way.
First thing is, install from play store would be possible if I had data service or if I was able to enable wi-fi. I only have calling & texting service on this phone and as for wi-fi, I can't enable it due to the problem of not being able to access the settings menu. All I have when it does boot, and it only fully boots when it is connected to a PC, is the pull-down lockscreen displaying time, date, status bar and the original wallpaper. Pull it down and the screen goes black with status bar still displayed along with time & battery level.
Secondly, USB debugging was enabled prior to all of this but I panicked & performed a factory reset. Don't think it's still on.
And lastly, is installing either a custom recovery, (which, to be frank, I'm just not that savvy) another rom or flashing original firmware even possible without a PC? Because I only have access to a PC without administrative privileges so therefore...no installing exe's without a password. Maybe this program lab will allow me, quite possibly not.
Hell, would I even still have root after a reset/data wipe?
Thanks, anyway, Esoteric Chaos
Off subject: The Joker was an Agent of Chaos. Loved Heath Ledger as The Joker.
Click to expand...
Click to collapse
You can go to ANY browser - even on the PC and log into your account and hit Install and it will send the command to your phone to install it. Pretty nifty. But you did say you factory reset, so that isn't actually going to work. Sorry.
The rest of the stuff would require a PC, though I don't think admin rights are needed, so there's that...
If you don't have your phone logged into Google or USB Debugging enabled, you're kind of stuck without a PC.
es0tericcha0s said:
You can go to ANY browser - even on the PC and log into your account and hit Install and it will send the command to your phone to install it. Pretty nifty. But you did say you factory reset, so that isn't actually going to work. Sorry.
The rest of the stuff would require a PC, though I don't think admin rights are needed, so there's that...
If you don't have your phone logged into Google or USB Debugging enabled, you're kind of stuck without a PC.
Click to expand...
Click to collapse
Well, on these PCs it certainly does. I thought I was on track yesterday and tried to install a copy of Odin that I found. Can't install without a frigging admin pass.
Someone else just suggested I try a stock rom flash. Might as well, right? Happen to know where I could find a good reliable copy? That also happens to be free?
Not sure why you were trying to use Odin for a non Samsung phone...?
The stock rom flash would only be possible via PC or if you had a custom recovery installed.
Here's what you would need to do for the Virgin Mobile Venture:
Download CWM: http://www.sendspace.com/file/4gt04i
Download adb/fastboot: http://forum.xda-developers.com/showthread.php?t=2317790
Download rom: http://goo.im/devs/LeslieAnn/Venture/Stock_Venture.zip - Put on SD card.
Drivers: http://pdanet.co/bin/PdaNetA4150.exe (this program is for USB tethering and installs the adb drivers for your phone as well as many others)
The CWM img will need to be in the folder you unzipped for adb/fastboot. You'll need to boot to fastboot mode by powering on with while holding Volume Up.
Open a terminal prompt and change directories to your adb/fastboot folder. Then run this command:
fastboot flash recovery nameofrecovery.img - fill in the nameofrecovery with whatever the CWM file name is.
(if this doesn't work - make sure that your PC is reading the phone correctly by using the command: fastboot devices . If you don't get anything back, make sure you check the Device Manager for errors. If you have them, try reinstalling the drivers and rebooting the PC)
Then pop the battery out and then reboot to recovery via powering on while holding volume down. Once there, you should be able to do a factory reset and then install the stock rom zip. The volume keys should scroll through selections and the Enter key for accept, or Power if that doesn't work. Not really sure about this particular phone.)
Actually, you might just be able to use adb to install a launcher apk once you have CWM installed. Might be a little easier.
launcher apk must be in adb folder then while in CWM:
adb install nameoflauncher.apk
Note: You can rename zips and apks to be easier to type the commands.
es0tericcha0s said:
Not sure why you were trying to use Odin for a non Samsung phone...?
Click to expand...
Click to collapse
Yeah, me either. I was all over the place yesterday grasping at anything. So Odin is only for Samsungs, huh? Guess I can delete the exe file from my sd.
Right then. I'm about to proceed with your advice. Cross your fingers and toes.
Thanks mate!
The CWM img will need to be in the folder you unzipped for adb/fastboot.
Click to expand...
Click to collapse
and
launcher apk must be in adb folder then while in CWM
Click to expand...
Click to collapse
Wait, what? Please excuse my ignorance, but am I missing something. ADB didn't come in a zip. It's an installer. I think you may have to dumb this down a bit more, mate.
Silver Rivers said:
and
Wait, what? Please excuse my ignorance, but am I missing something. ADB didn't come in a zip. It's an installer. I think you may have to dumb this down a bit more, mate.
Click to expand...
Click to collapse
Sorry, I meant in the folder that it extracts the files too.
es0tericcha0s said:
Sorry, I meant in the folder that it extracts the files too.
Click to expand...
Click to collapse
Right, got it.
Silver Rivers said:
Right, got it.
Click to expand...
Click to collapse
If you can't run the exe file, then let me know, and I'll just upload a zip / folder with the necessary files. You do not need admin access to run the adb commands.
es0tericcha0s said:
If you can't run the exe file, then let me know, and I'll just upload a zip / folder with the necessary files. You do not need admin access to run the adb commands.
Click to expand...
Click to collapse
That would be really cool, actually. But check this out:
I talked someone into allowing me to utilize his laptop. I installed ADB, moved the Launcher APK to the folder suggested, ran the commands but the command prompter responded with "waiting for device" and progressed no further. Could it be a driver issue? I was under the impression that if the PC recognizes your device (which it did) then a new driver install was not necessary.
Dude was real cool about it even though I ran his battery down quite significantly and didn't even accomplish anything.
So, if I had the ADB files then I could just copy them to...say the PC desktop and run the command prompter from there? If so, then yes please upload and I'll just try it that route rather than rely on someone's personal PC. Know what i mean?
I do appreciate all of this. I'm getting quite the education here. If you ever get married, let me know and I'll come and dance as my favor to you.:good:
Peace...I'll return tomorrow.
What mode were you in when trying to install? The laptop had the most up to date drivers? You checked the Device Manager to make sure there was no yellow exclamation mark next to the phone? It's not unheard of for the PC to recognize in one mode, but not load the correct drivers in another, as there are different drivers for the phone depending on if it is booted, in recovery, or download mode or whatever they call it for that phone. Just make sure to get the PDAnet drivers installed and reboot. That should do the trick.
Everything else you should need will be in here:
https://dl.dropboxusercontent.com/u/9903887/adbfastboot.zip
es0tericcha0s said:
What mode were you in when trying to install? The laptop had the most up to date drivers? You checked the Device Manager to make sure there was no yellow exclamation mark next to the phone? It's not unheard of for the PC to recognize in one mode, but not load the correct drivers in another, as there are different drivers for the phone depending on if it is booted, in recovery, or download mode or whatever they call it for that phone. Just make sure to get the PDAnet drivers installed and reboot. That should do the trick.
Everything else you should need will be in here:
https://dl.dropboxusercontent.com/u/9903887/adbfastboot.zip
Click to expand...
Click to collapse
I was in Recovery and I was also attempting to install the just the Launcher versus the entire ROM. And I was also feeling a tad bit rushed, cause dude was right there informing me of his battery status. "Well, it's down to 30%." Then 2 mins later.."Ok, looks like it just fell to 25%."
Haha...so yeah, with him pressuring me, I spaced on checking the device manager. This desktop that I'm on today seems to be cool. Just checked the manager & it informs me that my device is 'working properly'.
Off to give it another bloody joust, mate. Wish me luck...
Can you fully explain how to do this
es0tericcha0s said:
Not sure why you were trying to use Odin for a non Samsung phone...?
The stock rom flash would only be possible via PC or if you had a custom recovery installed.
Here's what you would need to do for the Virgin Mobile Venture:
Download CWM: http://www.sendspace.com/file/4gt04i
Download adb/fastboot: http://forum.xda-developers.com/showthread.php?t=2317790
Download rom: http://goo.im/devs/LeslieAnn/Venture/Stock_Venture.zip - Put on SD card.
Drivers: http://pdanet.co/bin/PdaNetA4150.exe (this program is for USB tethering and installs the adb drivers for your phone as well as many others)
The CWM img will need to be in the folder you unzipped for adb/fastboot. You'll need to boot to fastboot mode by powering on with while holding Volume Up.
Open a terminal prompt and change directories to your adb/fastboot folder. Then run this command:
fastboot flash recovery nameofrecovery.img - fill in the nameofrecovery with whatever the CWM file name is.
(if this doesn't work - make sure that your PC is reading the phone correctly by using the command: fastboot devices . If you don't get anything back, make sure you check the Device Manager for errors. If you have them, try reinstalling the drivers and rebooting the PC)
Then pop the battery out and then reboot to recovery via powering on while holding volume down. Once there, you should be able to do a factory reset and then install the stock rom zip. The volume keys should scroll through selections and the Enter key for accept, or Power if that doesn't work. Not really sure about this particular phone.)
Actually, you might just be able to use adb to install a launcher apk once you have CWM installed. Might be a little easier.
launcher apk must be in adb folder then while in CWM:
adb install nameoflauncher.apk
Note: You can rename zips and apks to be easier to type the commands.
Click to expand...
Click to collapse
I have a old ass iMac desktop that has not been used in 5plus years at all and I'm a mother of 3 with no clue how to do any of this if you can dumb it down for me that would be very help full as well I have no clue where to download any of the needed files please help. My email is [email protected]
Thank you