Hi, I have downloaded some firmwares to my Samsung galaxy s2. The last firmware I put on was Official I thought but in download mode where is says "Curent Binary" it says custom. How do I get that back to official samsung? Is there a way through kies, like with iPhone where itunes can reinstall the os?
Also does a firmware that is vodafone branded be put on a handset that is on the three network? Would it affect the signal?
Thanks
Get a jig from eBay. If you find the jig doesn't work, flash the 'old' bootloader from here. Yes you can flash Vodafone branded firmware on a phone that uses 3's network. No, it shouldn't affect the signal. These things are dependent on your modem, and most roms don't replace your existing modem.
I flashed using a firmware from this site. http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=-1#modelsa and it returned it to the Samsung Official. Everything is back to standard.
MistahBungle said:
Get a jig from eBay. If you find the jig doesn't work, flash the 'old' bootloader from here. Yes you can flash Vodafone branded firmware on a phone that uses 3's network. No, it shouldn't affect the signal. These things are dependent on your modem, and most roms don't replace your existing modem.
Click to expand...
Click to collapse
Is flashing the old bootloader safe on a custom ROM? Even if it's an AOKP ROM? Cheers.
Yep.
However, some roms may not boot with the old bootloader (In saying that, I'm running it with CM9, but I didn't muck around with stock versions of ICS beforehand which might have changed it to a BL which doesn't work with CM9). If in doubt, ask the developer of the custom rom you're using if it works OK with the old bootloader (I presume you want to get rid of the boot triangle ?).
Obviously you run a very small risk of bricking your phone every time you flash anything, and you only flash/mess with bootloaders when you have a specific reason for same.
Having to send your phone to Samsung/your carrier for warranty service is one of those reasons, and if you've gone back to stock & your jig won't work, flashing the old bootloader is a simple no mucking around way of getting it done.
JoshS2 said:
Is flashing the old bootloader safe on a custom ROM? Even if it's an AOKP ROM? Cheers.
Click to expand...
Click to collapse
MistahBungle said:
Yep.
However, some roms may not boot with the old bootloader (In saying that, I'm running it with CM9, but I didn't muck around with stock versions of ICS beforehand which might have changed it to a BL which doesn't work with CM9). If in doubt, ask the developer of the custom rom you're using if it works OK with the old bootloader (I presume you want to get rid of the boot triangle ?).
Obviously you run a very small risk of bricking your phone every time you flash anything, and you only flash/mess with bootloaders when you have a specific reason for same.
Having to send your phone to Samsung/your carrier for warranty service is one of those reasons, and if you've gone back to stock & your jig won't work, flashing the old bootloader is a simple no mucking around way of getting it done.
Click to expand...
Click to collapse
I just got my phone back from repair and they upgraded it to the latest version of ICS with the ICS Bootloader. I've flashed Hydrogen-ICS and I've got the yellow triangle, obviously the USB jig won't sort it because of the bootloader. There's no disadvantage to having the triangle other than if I need to send it back under warranty is there? I think I might just leave it and sort it if the time comes.
Ahhhh OK. Gotcha
No, the triangle is only a 'cosmetic' thing. You could probably flash the old bootloader, get rid of the triangle, flash the new bootloader, and be on your merry way. But if it doesn't bother you & you've got Hydrogen running the way you want & everything is hunky dory otherwise, there's no need to do it
JoshS2 said:
I just got my phone back from repair and they upgraded it to the latest version of ICS with the ICS Bootloader. I've flashed Hydrogen-ICS and I've got the yellow triangle, obviously the USB jig won't sort it because of the bootloader. There's no disadvantage to having the triangle other than if I need to send it back under warranty is there? I think I might just leave it and sort it if the time comes.
Click to expand...
Click to collapse
MistahBungle said:
Ahhhh OK. Gotcha
No, the triangle is only a 'cosmetic' thing. You could probably flash the old bootloader, get rid of the triangle, flash the new bootloader, and be on your merry way. But if it doesn't bother you & you've got Hydrogen running the way you want & everything is hunky dory otherwise, there's no need to do it
Click to expand...
Click to collapse
Ah right, I think I will just leave it for now as it doesn't really bother me! Thanks!
When i flashed back the triangle was gone and i used the branded rom so it has the three network boot logo again just like the day i pulled it out the box all the same apps and it worked like normal in kies i even had a successful update in kies. Though it took some work didnt reconize the device after a good 30mins of pluging and pulling and restarting. I also found some apps can stop kies working apparently, ones from market not on pc. And i had a custome 2.3.6. I just fancied having back to normal till i get bored again.
man you guys need to learn........... ics bootloader use triangle away, is that simple.
atifsh said:
man you guys need to learn........... ics bootloader use triangle away, is that simple.
Click to expand...
Click to collapse
I don't understand what you mean by that? Mine doesn't?
arranstobbs said:
I don't understand what you mean by that? Mine doesn't?
Click to expand...
Click to collapse
"Triangle Away" is an app by Chainfire on the Play Store. Costs a couple bucks, but you don't have to flash an old bootloader and/or wait for a USB jig to get to you, which is your other option.
http://forum.xda-developers.com/showthread.php?t=1494114
atifsh said:
http://forum.xda-developers.com/showthread.php?t=1494114
Click to expand...
Click to collapse
Forgot about the XDA exclusive that's free. But seeing all the good work Chainfire does, when I finally do go to ICS, I'll buy it on the Play Store to throw him a couple bucks. He deserves it.
You can avoid the counter increase, simply flash your archives via CWM instead of doing it via Odin. It won't update the counter, so the triangle won't appear
Joravis said:
You can avoid the counter increase, simply flash your archives via CWM instead of doing it via Odin. It won't update the counter, so the triangle won't appear
Click to expand...
Click to collapse
wow someone need to fix his knowledge for this!
---------- Post added at 10:58 AM ---------- Previous post was at 10:51 AM ----------
tutorial kinda................ thats how i run
1: flashed cwm (attached) via odin
2: wiped everything, including system
3: flashed stock ICS via odin
4: rooted via cf-root
5: used triangle away to reset counter and triangle
6: install mobile odin
7: flashed the cwm kernel extracted from the same and flashed using mobile odin [zimage]
8: now i have cwm without counter and triangle.
9: flashed cm9 using cwm
now i can flash whatever rom via cwm, without counter issue.
you want to flash kernel use mobileodin again and you wont update counter.
hope this helps.
EDiT: odin is 99.9% for stock ROM's thus will not raise counter. only when you flash cwm for the first time with odin you get counter + triangle.
hope this helps.
Related
Hi guys,
I just received my USB jig I ordered from eBay, and for some reason the flash counter isn't being reset. The phone enters download mode, and states it has cleared that data but when I boot it back up and check the count is where it was.
Has anyone else had a similar issue?
Cheers
SirMerkel said:
Hi guys,
I just received my USB jig I ordered from eBay, and for some reason the flash counter isn't being reset. The phone enters download mode, and states it has cleared that data but when I boot it back up and check the count is where it was.
Has anyone else had a similar issue?
Cheers
Click to expand...
Click to collapse
hmm maybe the USB jig isnt fully functional, I remember reading that if it isnt soldered with a certain ohm it might not work..but not sure tho best ask in the USB jig thread...
sounds like you got a bogus one or it died during transport. If you can try to pry it open and make sure everything soldered is still connected. Otherwise its probably just a dud.
Thanks for the help guys. I believe the person I bought it from is also active on these forums, so hopefully he'll replace it asap
Thanks again
Try to replace from where u got it....
i have issue with usb jig too, i had it for a few months and it was working flawless, but today when i tried to reset the binary counter it didn`t worked that well...
i switched my phone off and waited until the vibration, then plugged the usb jig and after a few secs the factory mode appeared but it was still showing the custom binary and the yellow triangle after reboot...
so do you think the jig broke down or samsung put some kind of a new protection in the recent roms. i`m running 2.3.5 CheckRom Revolution HD 3.1.1...
What kernel rev are you running? The more recent ones have a new bootloader that no longer works with the jig.
You probably have new bootloader from Samsung while updating to 2.3.5. Look for how to get old bootloader back on your device or how to get the jig to reset the counter with new bootloader and it will work.
I had the same problem, but this Patch solved it! It's because samsung disabled the reset counter function since android 2.3.4
http://kurzlink.de/sgspat5
Password: sgs2patch
See the picture for details!
Sent from my GT-I9100 using Tapatalk
i`m running [email protected] #23
i`m gonna try the patch later when i get home
Or go to intratechs official firmware thread where he has the old bootloader available for download and flash in Odin.
Sent from my GT-I9100 using XDA App
manniakk said:
i`m running [email protected] #23
i`m gonna try the patch later when i get home
Click to expand...
Click to collapse
Make sure that you mark the "Phone Bootloader Update" as shown on the picture!
I've attached the files...
It worked for me.. I have Siyah 2.1.1 and Checkrom 3.1.1 running
It works... thanks!
@avetodave: thanks, it worked for me too...
avetodave said:
I had the same problem, but this Patch solved it! It's because samsung disabled the reset counter function since android 2.3.4
LINK
Password: sgs2patch
See the picture for details!
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Sorry to revive an old thread, is someone able to reupload this patch please?
Thought it may be safer to revive an old thread than start a new one...
Codex0 said:
Sorry to revive an old thread, is someone able to reupload this patch please?
Thought it may be safer to revive an old thread than start a new one...
Click to expand...
Click to collapse
I presume it was this
Intratech said:
All packages below this point have the old bootloader so you can safely reset the binary counter with a Jig.
If you've already flashed a full package from elsewhere or updated using KIES and cannot reset your binary counter using the Jig just flash this package in the PDA or Bootloader section of Odin to replace the bootloaders and then you can reset the counter: http://www.multiupload.com/LQQBRQVJUD
Here are the new bootloader tarball if you want to flash them back after resetting your binary counter: http://www.multiupload.com/5LNOCL7KPV
Click to expand...
Click to collapse
oinkylicious said:
I presume it was this
Click to expand...
Click to collapse
Thanks for that! I actually read on here that newer roms are anti jig so I flashed a slightly older rom and hey bingo it worked perfectly
Thank you for the assistance
Codex0 said:
Thanks for that! I actually read on here that newer roms are anti jig so I flashed a slightly older rom and hey bingo it worked perfectly
Thank you for the assistance
Click to expand...
Click to collapse
I don't mean to bring up an old thread, but it seems more apt to continue the conversation than to start a new one.
What is the latest version ROM that has a boot img that is still "jig-able"?
I had CheckROM v4 (KK5 based), then tried the leaked ICS (LP2). I then restored back to my old ROM via CWM recovery (I made a backup before), and while everything is back, I have this yellow exclamation mark. The jig doesn't work anymore. I assume CWM does not restore the bootloader, just the system, data, and cache. I even noticed the modem was left at LP1 (I used to have KI4).
Thanks.
naddie said:
I don't mean to bring up an old thread, but it seems more apt to continue the conversation than to start a new one.
What is the latest version ROM that has a boot img that is still "jig-able"?
I had CheckROM v4 (KK5 based), then tried the leaked ICS (LP2). I then restored back to my old ROM via CWM recovery (I made a backup before), and while everything is back, I have this yellow exclamation mark. The jig doesn't work anymore. I assume CWM does not restore the bootloader, just the system, data, and cache. I even noticed the modem was left at LP1 (I used to have KI4).
Thanks.
Click to expand...
Click to collapse
You need to use ODIN to flash a stock rom to restore the device completely to factory
http://forum.xda-developers.com/showpost.php?p=16781156&postcount=2
I used xwki8 from the link above via odin to be able to use the jig.
I then turned my phone off, used the jig to boot into download mode to flash cwm and miui. Doing it this way seems to have prevented me getting the "I'm not official and shall spam a giant annoying yellow triangle at you" symbol
Hope this helps
Codex0 said:
You need to use ODIN to flash a stock rom to restore the device completely to factory
http://forum.xda-developers.com/showpost.php?p=16781156&postcount=2
I used xwki8 from the link above via odin to be able to use the jig.
I then turned my phone off, used the jig to boot into download mode to flash cwm and miui. Doing it this way seems to have prevented me getting the "I'm not official and shall spam a giant annoying yellow triangle at you" symbol
Hope this helps
Click to expand...
Click to collapse
Not the answer I wanted to hear, but I guess I had no choice. I was hoping I could just flash the boot loader by itself, but I couldn't find it as a separate image.
So that's what I did - flashed stock, rooted, and started all over.
Thanks.
Hey guys
I've never modded my phone at all when it comes to custom ROM's, etc. My friend told me today that he flashed a CM9 ICS nightly build and it sparked some interest in me.
I read that to get the CM9 ROM you need to have CWM installed on your phone. Is that necessary? If so, why?
I also read that it will void my phones warranty if I install CWM...now obviously nothing is "suppose" to go wrong with the phone while doing this process and I heard that if the phone is soft bricked it can be recovered with nvflash (is this true?).
Finally, is there anything stopping me from flashing a stock bootloader (is that what CWM is?) onto the phone and then a stock ROM, allowing me to do a return on the phone without them knowing?
I'm completely new to this and this whole forum is so confusing and the only real easy instructions I found were on the CM9 site.
Thanks guys,
Elliott
EDIT: I also just saw on this video: http://www.youtube.com/watch?v=1uK-k3KfY5c
He used some sort of USB dongle at the end for something...what did it do?
Everything you need and more in the relevant thread. With such basic questions and the apparent lack of ability to search, read and digest information, you would be wiser to stick to stock, official ROMs though.
http://forum.xda-developers.com/showthread.php?t=1419102
Thanks but of course that did not answer any of my questions. I have already seen that and obviously you didn't read my post correctly. I am more interested in the warranty issues with doing this...and if it's possible to comletely revert everything to the point where they can't tell what was done with the phone...I have searched around.
What issues do you think you'll run into that will warrant you sending the phone in? Im on my second samsung phone and they've been flawless, warranty be damned, flash away.
CWM "clockworkmod" is a recovery mode replacement for the stock SGS2.
It's used to do a number of things, one of which is to flash items to the device such as full roms or kernels. I'll let you read up on the rest. Without the need to have your device connected to a pc.
Flashing anything unofficial is bound to void your warranty whether via CWM or Odin etc.
The older bootloader allows the use of a USB jig to reset the warning triangle and flash counter to conceal any warranty voiding activity. At some point (can't remember when) Samsung updated the bootloader to prevent the jig working. A simple flash of the older one fixes the issue and doesn't appear to affect the device usage.
There are some great articles on xda to read about flashing etc. Worth a look.
Hope this helps.
Sent from my GT-I9100 using XDA
peachpuff said:
What issues do you think you'll run into that will warrant you sending the phone in? Im on my second samsung phone and they've been flawless, warranty be damned, flash away.
Click to expand...
Click to collapse
Hey
Well I'm not planning on the phone having any issues...but you never know what could happen...When I first got my SGS2 the home button stopped working within 24 hours and I had to go back and get another one...
I'm just saying anything could happen...ex: buttons breaking, etc.
aceofclubs said:
CWM "clockworkmod" is a recovery mode replacement for the stock SGS2.
It's used to do a number of things, one of which is to flash items to the device such as full roms or kernels. I'll let you read up on the rest. Without the need to have your device connected to a pc.
Flashing anything unofficial is bound to void your warranty whether via CWM or Odin etc.
The older bootloader allows the use of a USB jig to reset the warning triangle and flash counter to conceal any warranty voiding activity. At some point (can't remember when) Samsung updated the bootloader to prevent the jig working. A simple flash of the older one fixes the issue and doesn't appear to affect the device usage.
There are some great articles on xda to read about flashing etc. Worth a look.
Hope this helps.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Hey thanks for posting.
So you're saying that if I flash CWM, and then need to return the phone for whatever reason, I can install the original Samsung recovery tool that was there prior to installing CWM? Is that what you mean by "a simple flash of the older one..."?
Basically, if I ever need to return the phone, can I make it reset 100% original so that even if they knew how to check for stuff like CM9 and CWM, they wouldn't be able to find out that it was ever installed?
And when Samsung releases their official firmware and I decide I want to flash to that one, can I still use it? I'm guessing I could just flash it normally using CWM, but what if I wanted to go back to 100% original and update from there?
Starholdest said:
Thanks but of course that did not answer any of my questions. I have already seen that and obviously you didn't read my post correctly.
Click to expand...
Click to collapse
Well that kind of attitude just irks me.
Unless I lack the ability to count, you asked a total of five questions, all of which are answered in that thread and countless others around this forum.
Anyway, your apparent main concern has to do with wanting to commit fraud. If you're okay with that, keep going. I guess since you're happy to break forum rules (rule #1), why not try and fudge a warranty claim?
Yes you can return your device to completely Telco/carrier stock.
If you want to do it...
Make a CWM backup.
Backup everything to pc from internal SD. A simple copy will do.
Use CWM to format internal SD.
Boot into download mode and flash Telco/carrier stock firmware via Odin.
Use jig to reset flash counter.
Use stock recovery to wipe device.
This should be as it was when you pulled it out of the box on day one.
When you get it back use cfroot kernel to root via Odin.
Copy SD card backup from pc to SD.
Restore CWM backup.
Should now be as it was before resetting to stock. Except maybe the modem if you like a different one from Telco/carrier stock.
Sent from my GT-I9100 using XDA
aceofclubs said:
Yes you can return your device to completely Telco/carrier stock.
If you want to do it...
Make a CWM backup.
Backup everything to pc from internal SD. A simple copy will do.
Use CWM to format internal SD.
Boot into download mode and flash Telco/carrier stock firmware via Odin.
Use jig to reset flash counter.
Use stock recovery to wipe device.
This should be as it was when you pulled it out of the box on day one.
When you get it back use cfroot kernel to root via Odin.
Copy SD card backup from pc to SD.
Restore CWM backup.
Should now be as it was before resetting to stock. Except maybe the modem if you like a different one from Telco/carrier stock.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Excellent thanks for your help!
So as soon as I boot into download mode and flash telco/carrier stock firmware via Odin, will CWM be erased? Also, what about what this gentleman said?
The older bootloader allows the use of a USB jig to reset the warning triangle and flash counter to conceal any warranty voiding activity. At some point (can't remember when) Samsung updated the bootloader to prevent the jig working.
Click to expand...
Click to collapse
What if I have the updated bootloader?
Yes CWM is removed by flashing official firmware so original recovery from then.
If jig doesn't work use Odin to flash the old bootloader. It definitely will work then.
Sent from my GT-I9100 using XDA
aceofclubs said:
Yes CWM is removed by flashing official firmware so original recovery from then.
If jig doesn't work use Odin to flash the old bootloader. It definitely will work then.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Great thanks for all your help.
Going here to see the stock firmware (I guess bootloader is the same thing?), and scrolling down to the "Bell" section, there are two items listed there.
http://forum.xda-developers.com/showthread.php?t=1113928
UGKG2: http://www.multiupload.com/WHKOJ8A5FG
Firmware info: PDA: UGKG2 Phone: UGKG2 CSC: BMCKG2
UGKG2 Stock Kernel:http://www.multiupload.com/43QUKBBK47
Password is: [email protected]
Click to expand...
Click to collapse
What's the difference between the two?
The first link has the entire rom, the 2nd has just the kernel. However...
These links have been dead for a while now, so you'll need to head over to Samfirmware.com & search for the firmware you need. Follow whatever instructions they have for flashing firmware downloaded from their site.
Starholdest said:
Great thanks for all your help.
Going here to see the stock firmware (I guess bootloader is the same thing?), and scrolling down to the "Bell" section, there are two items listed there.
http://forum.xda-developers.com/showthread.php?t=1113928
What's the difference between the two?
Click to expand...
Click to collapse
Thanks. And what is the difference between just the kernel and the whole thing? Is kernel just another word for bootloader? I looked up the terms briefly...
Also, samfirmware.com doesn't have the one I have...is there another source or something?
The rom has stuff like themes, fonts, and other stuff (nuts & bolts) the kernel is like the engine (controls stuff like WiFi, controls everything you can do as root, etc). The package containing the whole rom also has the kernel in it.
No idea. Do a Google search. Alternatively, you can get the latest firmware available for your country/carrier (which may or may not be the same as the one you're looking for, depending on whether the carrier has updated firmware since the one you're looking for was released) with the PC version of Checkfus (do a search for it on here Google).
Edit to add - A better analogy for rom/kernel. Think of your phone as a car. The kernel is the engine, the rom is everything else/the car itself.
Starholdest said:
Thanks. And what is the difference between just the kernel and the whole thing?
Also, samfirmware.com doesn't have the one I have...is there another source or something?
Click to expand...
Click to collapse
Bootloader etc.
Starholdest said:
Excellent thanks for your help!
So as soon as I boot into download mode and flash telco/carrier stock firmware via Odin, will CWM be erased? Also, what about what this gentleman said?
What if I have the updated bootloader?
Click to expand...
Click to collapse
I think everyone has cleared everything else for you, so I'll talk about the jig! Firstly you most likely have the new bootloader so your flash counter will still be on, therefore your warranty will still be void. LUCKILY there's an app called TriangleAway (made my Chainfire) which you can find with a simple search, this will let you reset your flash counter and get rid of the yellow triangle as long as you're running a rooted ICS ROM (like CM9) and you can then flash back to stock and all traces of any root will be gone. There is a warning that the app can brick your phone but through my many uses of it, it has never happened and no-one has reported any brick.
Cool thanks for your help!
Hi all.
My SGS2 needs to be sent in for repairs in the imminent future, and in preparation I unrooted my phone and flashed a Stock ICS build (my carrier is Optus, Australia). Before this I was running a few different GB roms. When I boot my phone I do not get the yellow triangle (I assume this is because I am running official Samsung firmware), but if I put the phone into download mode, it still shows the 8 custom flashes I did earlier.
My real question is will Chainfire's Triangle Away app remove the binary count even if the triangle isn't there?
And a better question would be, would having official firmware be enough to still claim warranty, or would I need to have both official firmware and a "0" custom flash count?
Thanks for any help!
I believe Samsung may throw a stink about the counter, even if you are on stock/official firmware. This counter would imply that you have voided your warranty previous to the current state of the phone and it's OS
To be safe I would use the Triangle away app
EDIT: Yes, the app does reset the flash counter. See https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway&hl=en
Its always safe to clear the counter before returning it for service. yes the triangle away app will clear the counter with/without triangle.
download it for free from here
http://forum.xda-developers.com/showthread.php?t=1494114
Thanks guys!
I tried to run the app but it's telling me I need Superuser access...
Does this mean I need to root the phone, use the triangle away app, then UNroot the phone?
Sorry if this is obvious... Not overly confident of my ability to keep the phone unbricked haha.
sdardz said:
Thanks guys!
I tried to run the app but it's telling me I need Superuser access...
Does this mean I need to root the phone, use the triangle away app, then UNroot the phone?
Sorry if this is obvious... Not overly confident of my ability to keep the phone unbricked haha.
Click to expand...
Click to collapse
You are correct. Root the phone first, use the app, then unroot.
Thanks!
So it will still think it's Samsung official after that process?
You'll need a rooted ICS firmware already on your phone.
Check the Triangle Away forum to ensure its working with your firmware version.
Flash Triangle Away, this will remove Yellow Triangle and reset Custom Counter to 0.
Flash official unrooted firmware using Odin, this wont increase your Custom Counter as its official. Use a firmware thats specific to your region.
http://forum.xda-developers.com/showthread.php?t=1075278
Job done.
Also check my sigi for links
Thanks! This forum is full of amazing help.
So theoretically I could follow those steps then flash the stock ROM a thousand times and the flash counter would remain at 0?
If it makes you feel any better I went to Optus 3 weeks ago with a phone that wouldn't turn on with ICS for another region with root and they fixed it.
I think my USB jig cleared the counter to 0 though. I couldn't connect my phone to dl mode or anything
The app removes the triangle as well as the counter
Yeah I tried using the jig a while ago but I think I have the newer bootloader, so it didn't do anything, which was very disappointing.
I'd just hate to take it in then have them tell me to get bent because I rom'ed it.
Ok so let me know if theres a problem with my process.
I'm using ICS and the kernel is XWLP4.
There was no LP4 in Chainfires thread but I read that I could use the next closest one. So I should flash something like "CF-Root-SGS2_XW_O2U_LP3-v5.4-CWM5.zip" and then triangle away then use the Optus stock ICS?
UPDAT: I tried this method and it worked perfectly! Thanks so much to everyone who helped.
has worked like a charm for me everytime i put stock firmwares on my phone
Safest way is to flash a really old firmware and thus flashing the old bootloader. Now reset the counter with an usb jig. Done.
Sent from my Transformer TF101 using Tapatalk 2
d3l1 said:
Safest way is to flash a really old firmware and thus flashing the old bootloader. Now reset the counter with an usb jig. Done.
Sent from my Transformer TF101 using Tapatalk 2
Click to expand...
Click to collapse
Or just flash the old bootloader.
I've just flashed Indian ICS on my SGSII and have also rooted it. Now, I want to reset the binary counters and remove the yellow triangle with the help of USB JIG. The problem is that newer bootloader is preventing me to use it. So, obviously, I want an old bootloader.
SO THE QUESTION IS - Where can I get it from?
From here
Why don't you just use Triangle Away?
Paras Lehana said:
I've just flashed Indian ICS on my SGSII and have also rooted it. Now, I want to reset the binary counters and remove the yellow triangle with the help of USB JIG. The problem is that newer bootloader is preventing me to use it. So, obviously, I want an old bootloader.
SO THE QUESTION IS - Where can I get it from?
Click to expand...
Click to collapse
for this moment, it wont be possible except u downgrade whole rom to gingerbread as if u flash old bootloader (gb based), the ICS will maybe not booting up anymore.
u should reset all those thing before you are upgrading to ICS, well i never had any of those YT/BC if we know the way around it.
the only option : whole rom downgrade to GB, but honestly, i am not sure if it is plausible to do with odin.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
ctomgee said:
Why don't you just use Triangle Away?
Click to expand...
Click to collapse
this will/maybe will only remove yellow triangle, not binary counter as binary counter still need to be reset with usb jig in which only in old bootloader (gb) is possible as samsung patched the exploit already afterwards
creezalird said:
for this moment, it wont be possible except u downgrade whole rom to gingerbread as if u flash old bootloader (gb based), the ICS will maybe not booting up anymore.
u should reset all those thing before you are upgrading to ICS, well i never had any of those YT/BC if we know the way around it.
the only option : whole rom downgrade to GB, but honestly, i am not sure if it is plausible to do with odin.
Click to expand...
Click to collapse
You can safely use the old GB bootloader with ICS.
Old bootloader
http://androidfirmwares.net/Tools/Download/4
ICS Bootloader
http://androidfirmwares.net/Tools/Download/2
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
creezalird said:
for this moment, it wont be possible except u downgrade whole rom to gingerbread as if u flash old bootloader (gb based), the ICS will maybe not booting up anymore.
u should reset all those thing before you are upgrading to ICS, well i never had any of those YT/BC if we know the way around it.
the only option : whole rom downgrade to GB, but honestly, i am not sure if it is plausible to do with odin.
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
this will/maybe will only remove yellow triangle, not binary counter as binary counter still need to be reset with usb jig in which only in old bootloader (gb) is possible as samsung patched the exploit already afterwards
Click to expand...
Click to collapse
As bored_stupid already said, old bootloader works fine on ICS. Many have done it. And TriangleAway DOES reset the counter.
You should read and research more before trying to correct others.
ctomgee said:
As bored_stupid already said, old bootloader works fine on ICS. Many have done it. And TriangleAway DOES reset the counter.
You should read and research more before trying to correct others.
Click to expand...
Click to collapse
i am sorry as i thought he was asking regarding the G version, not the non G, as in G version, even triangleaway seems to be not working.
ctomgee said:
Why don't you just use Triangle Away?
Click to expand...
Click to collapse
I could use it but I like to do things that i can't find.
I knew about triangle away but if I just take it as the ultimate thing to do, it'd prevent me from learning new things.
Sent from my GT-I9100 using Tapatalk 2
@Creezalird...you were exactly right for the G variant as of very less development for it.
Sent from my GT-I9100 using Tapatalk 2
Anyone having the knowledge ...
Will flashing bootloaders change something?
I mean, they provides the commands for the device while booting, right?. So..?
Also, flashing it by selecting PDA? What if I select Bootloader in Odin?
UPDATE - GOT THE ANSWER
You can select any one - PDA or Bootloader
You can flash the new bootloader again but that won't change anything except disabling usage of USB JIG
Bottom line; don't mess with bootloaders unless you have a specific reason for wanting to flash them. For example, you've messed around with stock ICS & you're switching to CM9 and current bootloader doesn't work or you want to use a jig to reset the flash counter & it won't work with current bootloader.
Flashing a bootloader 'just to see what happens' is asking for a dead phone.
MistahBungle said:
Bottom line; don't mess with bootloaders unless you have a specific reason for wanting to flash them. For example, you've messed around with stock ICS & you're switching to CM9 and current bootloader doesn't work or you want to use a jig to reset the flash counter & it won't work with current bootloader.
Flashing a bootloader 'just to see what happens' is asking for a dead phone.
Click to expand...
Click to collapse
Dude! I know that. Bootloaders are the reason for the device to boot.
Well, I have never used a Custom ROM plus what if I flash the old bootloader, use the JIG and again flash the previous one.
Still, it may have risk, right? But for me, every task in this universe has the same...so that means you can't dare to try anything??
!!
Sent from my GT-I9100 using Tapatalk 2
what you could try
flash over one of siyah kernals they have removed yellow triangle
My friend has an S2 he wants me to root, and I'm having trouble.
I've tried the one click method from windows computers though they don't seem to work as he is on ICS.
The ICS alternative says reboot to recovery etc, though obviously he doesn't have recovery so I can't do that either.
Of course I'm going to be told to root it via flashing, though while following the guide, the phone soft-bricked and wouldn't turn on (yellow triangle) though luckily I found the Orange UK Restore Package and now it's back to stock!
When I tried to flash it said use the most similar kernel you can find, and so I did, and it didn't work!
The kernel he has is I9100PBVLP6 and there was not an insecure kernel of that available.
Can anyone help?
tomhurst said:
My friend has an S2 he wants me to root, and I'm having trouble.
I've tried the one click method from windows computers though they don't seem to work as he is on ICS.
The ICS alternative says reboot to recovery etc, though obviously he doesn't have recovery so I can't do that either.
Of course I'm going to be told to root it via flashing, though while following the guide, the phone soft-bricked and wouldn't turn on (yellow triangle) though luckily I found the Orange UK Restore Package and now it's back to stock!
When I tried to flash it said use the most similar kernel you can find, and so I did, and it didn't work!
The kernel he has is I9100PBVLP6 and there was not an insecure kernel of that available.
Can anyone help?
Click to expand...
Click to collapse
Your friend has the UK Orange NFC phone. Use LP7 Insecure kernel.
http://download.chainfire.eu/158/CF-Root/SGS2/CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip?retrieve_file=1
You will have the yellow triangle after flashing and your binary flash counter would have increased by 1.
You can use triangle away to remove the symbol and reset the flash counter to zero.
Or have a look at the Root/Unroot guide in my signature.
Sent from my GT-I9100P using Xparent ICS Blue Tapatalk 2
bored_stupid said:
Your friend has the UK Orange NFC phone. Use LP7 Insecure kernel.
You will have the yellow triangle after flashing and your binary flash counter would have increased by 1.
You can use triangle away to remove the symbol and reset the flash counter to zero.
Or have a look at the Root/Unroot guide in my signature.
Sent from my GT-I9100P using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
That's brilliant! Thanks so much. I'll have to convince him to let me now. He doesn't want me going near his phone again haha
If your friend now doesn't want you to go to near his phone, let him root it himself or live with it the way it is.
Statements like "he obviously doesn't have recovery" when he obviously does lead me to believe you'll only damage his phone anyway.
bored_stupid said:
Your friend has the UK Orange NFC phone. Use LP7 Insecure kernel.
Click to expand...
Click to collapse
So I just flash this under PDA? Will this give just root and no recovery?
oinkylicious said:
If your friend now doesn't want you to go to near his phone, let him root it himself or live with it the way it is.
Statements like "he obviously doesn't have recovery" when he obviously does lead me to believe you'll only damage his phone anyway.
Click to expand...
Click to collapse
Why does he obviously have recovery? His phone is exactly how he got it. Unless they give you recovery now? I used to have a Spica (piece of crap) which I had to root in order to get recovery onto it. And he has no idea how to root and his phone is being slow and crashes a lot, so he wants to make it better, I told him a custom ROM would help.
tomhurst said:
So I just flash this under PDA? Will this give just root and no recovery?
Why does he obviously have recovery? His phone is exactly how he got it. Unless they give you recovery now? I used to have a Spica (piece of crap) which I had to root in order to get recovery onto it. And he has no idea how to root and his phone is being slow and crashes a lot, so he wants to make it better, I told him a custom ROM would help.
Click to expand...
Click to collapse
All new or old S2s should have recovery albeit stock 3e recovery," if they have not installed another recovery ". Try it!
Power down. Then at the same time press:- volume up/home button/power button.
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
tomhurst said:
his phone is being slow and crashes a lot, so he wants to make it better, I told him a custom ROM would help.
Click to expand...
Click to collapse
You told him bogus information then.
tomhurst said:
My friend has an S2 he wants me to root, and I'm having trouble.
I've tried the one click method from windows computers though they don't seem to work as he is on ICS.
The ICS alternative says reboot to recovery etc, though obviously he doesn't have recovery so I can't do that either.
Of course I'm going to be told to root it via flashing, though while following the guide, the phone soft-bricked and wouldn't turn on (yellow triangle) though luckily I found the Orange UK Restore Package and now it's back to stock!
When I tried to flash it said use the most similar kernel you can find, and so I did, and it didn't work!
The kernel he has is I9100PBVLP6 and there was not an insecure kernel of that available.
Can anyone help?
Click to expand...
Click to collapse
Head over to here: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona, & find the specific firmware for your friends device & flash in PDA via Odin! (no need to find a seperate kernel to flash, as it will be included in the official firmware package!)
At this point you'll have no yellow triangle on your boot up splash screen, & no flash count!
Then head over to here: http://forum.xda-developers.com/showthread.php?t=1501719 & root the device using the instructions given! (you'll need an external sd-card in your device to put the files on for rooting!)
Still no yellow triangle on boot splash screen, & also no extra flash count!
Finally, install Triangle Away from here "IF NEEDED": https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway&hl=en, & "MAKE SURE" it gives the exact same flash count number as is in download mode, then click "Reset Counter".
Job done, official stock firmware with root (fast, stable & reliable!) with no yellow triangle or flash count visible!
What Samsung official firmware site? Even if such a thing existed why would the custom binary counter go up? Think about it. Also, OP already made it clear he's incapable of following those root instructions, as he apparently (and obviously) doesn't have recovery.
oinkylicious said:
You told him bogus information then.
Click to expand...
Click to collapse
What will help then? If you're going to put me down at least be constructive please.
tomhurst said:
What will help then? If you're going to put me down at least be constructive please.
Click to expand...
Click to collapse
What will help before you potentially brick your friends phone is to read the stickies.
Stickies here
Hopefully you might learn the basics of rooting/unrooting and installing firmware before its to late
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
oinkylicious said:
What Samsung official firmware site? Even if such a thing existed why would the custom binary counter go up? Think about it. Also, OP already made it clear he's incapable of following those root instructions, as he apparently (and obviously) doesn't have recovery.
Click to expand...
Click to collapse
tomhurst said:
What will help then? If you're going to put me down at least be constructive please.
Click to expand...
Click to collapse
It's just his way, don't worry about it!
1: This samsung firmware site: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
Obviously exists eh!
2: As I mentioned in my (helpfull!) post, the method I directed him to uses temporary "Touch CWM Recovery" for him to get into to root!
3: The method he tried was the oneclick method! That's not the method I directed him to! (try reading the post properly before commenting, as you've so graciously pointed out to me in the past!)
I hope this answers all of your descrepancies oinkylicious!
CrackDaddy said:
It's just his way, don't worry about it!
1: This official samsung firmware site: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
Obviously exists eh!
Click to expand...
Click to collapse
Actually Samfirmware.com is an unofficial site, not endorsed by Samsung at all.
although it is where to get the Samsung firmware's for all their phones.
bored_stupid said:
Actually Samfirmware.com is an unofficial site, not endorsed by Samsung at all.
although it is where to get the Samsung firmware's for all their phones.
Click to expand...
Click to collapse
Fair enough, well I won't split ends with you & thanks for the usefull information bored_stupid!
1) not official
2) it wouldn't go up "AGAIN" after flashing official firmware. Writing wrong information in CAPS doesn't make it right
3) I know, see 4)
4) he tried both and fell at the first hurdle.
Any more? Come at me bro.
oinkylicious said:
1) not official
2) it wouldn't go up after flashing official firmware.
Click to expand...
Click to collapse
I got the not official bit m8, get over yourself!
Really, I'm trying to help the bloke & all you can pick up on is "NOT OFFICIAL"?? please!
Any more? Come at me bro?? How old?...........
The more you post, the more foolish you look. Flashing an official binary from download mode will not increase your counter.
oinkylicious said:
The more you post, the more foolish you look. Flashing an official binary from download mode will not increase your counter.
Click to expand...
Click to collapse
& you're job on here I take it is to try & make people look stupid huh?
Like I said, how old?
Tell me something? what increases your binary count oinkylicious?
Flashing an unofficial binary from download mode. Such as CF-root or any of the custom kernels.
I just don't like people spreading incorrect information.
oinkylicious said:
Flashing an unofficial binary from download mode.
Click to expand...
Click to collapse
I stand corrected & edited your honour, at last, something creative to say
You's da man, whoop whoop!
he said the phone wouldn't boot & yellow triangle!
yellow triangle as far as I know= binary counter gone up!
Apart from using a jig, for which he'd also have to flash an older bootloader coz the phone's on ICS & it wouldn't work otherwise, what would you suggest to reset it?
Not false information I'm giving m8, just trying to be helpfull, & I can't see in what I originally posted how I wasn't trying to be helpfull really!? But you obviously can