For all who want desperately to make the Dual speakers of LWW work in the new ICS Roms (FXP Cm9) etc, Please REPLACE or ADD the following files (attached) in the zip file of the respective Rom that you are using in the CORRECT PATHS, before flashing that Rom in CWM. The paths are already given in the "RAR" archive, but for your convenience, I'm writing them once again.
For a CWM Flashble Zip (Dual Speakers and X-loud) For FXP CM9 Check ATTACHMENT....Flash It After flashing CM9....in CWM...
File Paths for Dual Speakers :
/system/bin/mediaserver
/system/lib/hw/audio.primary.default.so
/system/lib/hw/audio.primary.msm7x30.so
/system/lib/hw/audio_policy.default.so
/system/lib/hw/audio_policy.msm7x30.so
/system/lib/liba2dp.so
/system/lib/libaudioeq.so
/system/lib/libaudioflinger.so
/system/app/AudioEffectService.apk
/system/etc/audio_effects.conf
/system/etc/permissions/com.sonyericsson.audioeffectif.xml
/system/framework/semc_audioeffectif.jar
/system/vendor/etc/audio_effects.conf
Hope this makes your ICS experience even more 'bug'-less.
CREDITS :
Lasan(FrogyFurnetal) (For the files) , Expeacer (For telling which files to replace or add) , ramezzidane (For the zip) and obviously to all the other Developers for making the amazing builds in which we can try this.
This is experimntal....Dont try if u can't take risks...
Confirmed to work with FXP cm9...So, it does not work on MiniCm or ExMIUI due to different building sources...
For a CWM flashable zip by 'someguyfromhell' check THIS out and post your findings and issues with different Roms. This zip is confirmed to work on GB CM7. The flashable zip in not for ICS Cm9.
Are you tried it with MiniCMSandwich or ExMIUI? Because when we tried last time, the phone don't boot...
expeacer said:
Are you tried it with MiniCMSandwich or ExMIUI? Because when we tried last time, the phone don't boot...
Click to expand...
Click to collapse
Did you check permissions?
XperianPro said:
Did you check permissions?
Click to expand...
Click to collapse
We aren't noobs So, wrong question
kamarush said:
We aren't noobs So, wrong question
Click to expand...
Click to collapse
Just asking
any way tryed this before and didnt worked but I didnt got bootloop.
The file is not attached...
Also, if you want, I can make a Recovery-flashable .zip file.
XperianPro said:
Just asking
any way tryed this before and didnt worked but I didnt got bootloop.
Click to expand...
Click to collapse
In which ROM?
expeacer said:
Are you tried it with MiniCMSandwich or ExMIUI? Because when we tried last time, the phone don't boot...
Click to expand...
Click to collapse
XperianPro said:
Just asking
any way tryed this before and didnt worked but I didnt got bootloop.
Click to expand...
Click to collapse
I tried it with FXP cm9 and it worked like a charm...
Someguyfromhell said:
The file is not attached...
Also, if you want, I can make a Recovery-flashable .zip file.
Click to expand...
Click to collapse
Reuploaded the file...sorry for the issue...
did you try on CM7.2 ? CM9 is not stable yet, thanks very much
noob1995 said:
I tried it with FXP cm9 and it worked like a charm...
Click to expand...
Click to collapse
Yeah... It's good... But that is not same source which we use in MiniCM/MIUI...
noob1995 said:
Reuploaded the file...sorry for the issue...
Click to expand...
Click to collapse
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
i think he meant to replace theses files in the .zip of the rom and then flash it ??
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
Yeah finally dual speaker support on cm7.2. Can't believe it.
For me cm is the best rom ever.
@Someguyfromhell
Yeas a flashable zip would be great. Please if you have time create one.
Thx
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
a flashable zip would be awesome
thanks
edit: also please report this on the fxp bugtracker,
they may include the fixes in the next release
here:
http://code.google.com/p/freexperia/issues/list
Someguyfromhell said:
Should I create a CWM-flashable .zip file?
Also, your first post says to replace these files before flashing the ROM. That will not work, because ROM installation replaces these files, causing the dual speakers to not work.
These files need to be replaced after ROM installation.
Click to expand...
Click to collapse
prateek_gemini said:
i think he meant to replace theses files in the .zip of the rom and then flash it ??
Click to expand...
Click to collapse
Yeah...I meant to replace the files in the zip on ur PC before flashing that zip....actually once i tried doing that via root explorer but the system crashed and it failed to boot next time...Therefore i though that it would be safe to edit the zip file before flashing...
noob1995 said:
Yeah...I meant to replace the files in the zip on ur PC before flashing that zip....actually once i tried doing that via root explorer but the system crashed and it failed to boot next time...Therefore i though that it would be safe to edit the zip file before flashing...
Click to expand...
Click to collapse
in MiniCM i replaced with root explorer(twice now) it says android upgrading.. starting applications and stays like that,
will try reinstalling the whole thing now
motorazrv3 said:
Yeah finally dual speaker support on cm7.2. Can't believe it.
For me cm is the best rom ever.
@Someguyfromhell
Yeas a flashable zip would be great. Please if you have time create one.
Thx
Click to expand...
Click to collapse
really ?? my phone (WT19i) not able to boot CM7 >"<!
gandhar said:
in MiniCM i replaced with root explorer(twice now) it says android upgrading.. starting applications and stays like that,
will try reinstalling the whole thing now
Click to expand...
Click to collapse
As I said...try editing the files of the zip before flashing....
Tried setting files via file manager, also set the permissions, didn't work.
Sent from my WT19i using xda premium
Related
I've been wanting to try the kitchen out to see if I can try deodexing and zipaligning etc on the stock touchwiz ROM I'm running.
Do you think it would work? (despite it being discontinued)
yes it works still, works on ics & jellybean (i use it myself to deodex and zipalign)
Theshawty said:
I've been wanting to try the kitchen out to see if I can try deodexing and zipaligning etc on the stock touchwiz ROM I'm running.
Do you think it would work? (despite it being discontinued)
Click to expand...
Click to collapse
Yes dxixda kitchen works but you will need to add another file with gs3 parameters in the edify_defs folder with name m0..still the updater-script does not work . It gives me errors in the installing boot.img stage.. . Anyways you can use the kitchen to create your rom and then package your rom manually using updater-script and update-binary from some other working rom.. Then sign it..
If you or anyone finds a solution to that problem do let us know..
:thumbup:
Sent from someone in the Milky Way
zoot1 said:
but you will need to add another file with gs3 parameters in the edify_defs folder with name m0
Click to expand...
Click to collapse
Where do I find such file?
zoot1 said:
Yes dxixda kitchen works but you will need to add another file with gs3 parameters in the edify_defs folder with name m0..still the updater-script does not work . It gives me errors in the installing boot.img stage.. . Anyways you can use the kitchen to create your rom and then package your rom manually using updater-script and update-binary from some other working rom.. Then sign it..
If you or anyone finds a solution to that problem do let us know..
:thumbup:
Sent from someone in the Milky Way
Click to expand...
Click to collapse
I have a file for myself will upload it here once I reach home.. On my way back.. Hopefully you can see what is wrong.. I tried to get help from wanam also but we could not find the problem..
Edit: here you go..put the m0 file in the edify_defs folder..check if you can find any problem with it..
Sent from someone in the Milky Way
zoot1 said:
I have a file for myself will upload it here once I reach home.. On my way back.. Hopefully you can see what is wrong.. I tried to get help from wanam also but we could not find the problem..
Edit: here you go..put the m0 file in the edify_defs folder..check if you can find any problem with it..
Sent from someone in the Milky Way
Click to expand...
Click to collapse
I don't know anything about stuff like that
I'm a complete noob and just wanna try to deodex and stuff
Theshawty said:
I don't know anything about stuff like that
I'm a complete noob and just wanna try to deodex and stuff
Click to expand...
Click to collapse
Deodexing will work just fine..no probs..some times you might get an error with one or two apps..just use the option to deodex a single app and you will be good to go..
:good:
Edit:
Most important change the api level to 16 before deodexing..
just make a copy of your zipped rom, drop it into the working folder, deodex the files you want to and then pull those files out of the working folder and drop them into the original rom zip folder (minus the original odexed files)
no need to change anything, no need to drop new files in or mess with update script
as you will use your existing update script/meta inf folder blah blah blah, it means you can say yes to the mods the kitchen wants to make as you will only be taking the deodexed files from there, nothing else
(does that make sense? - im guessing you will ignore this anyway like my previous post))
Darkside Agent said:
just make a copy of your zipped rom, drop it into the working folder, deodex the files you want to and then pull those files out of the working folder and drop them into the original rom zip folder (minus the original odexed files)
no need to change anything, no need to drop new files in or mess with update script
as you will use your existing update script/meta inf folder blah blah blah, it means you can say yes to the mods the kitchen wants to make as you will only be taking the deodexed files from there, nothing else
Click to expand...
Click to collapse
Thanks, will try this.
Darkside Agent said:
(does that make sense? - im guessing you will ignore this anyway like my previous post))
Click to expand...
Click to collapse
Uh, sorry about that. I totally missed your post!
Did you get it all sorted in the end?
Darkside Agent said:
Did you get it all sorted in the end?
Click to expand...
Click to collapse
Nah, I basically said "f*ck it and deleted the whole thing.
Gonna let someone else deal with zipaligning, deodexing and all that.
Theshawty said:
Nah, I basically said "f*ck it and deleted the whole thing.
Gonna let someone else deal with zipaligning, deodexing and all that.
Click to expand...
Click to collapse
You need Patience my friend..
zoot1 said:
You need Patience my friend..
Click to expand...
Click to collapse
One of many things I lack and will probably always lack.
Sorry for dragging out an old thread but I thought I would have a go with this. I have the kitchen installed, I have put I9300XXDLI5_I9300OXADLI5_I9300XXDLI5_BTU.zip in the original_update and have the m0 file in tools/edify_defs
I then try and extract the ROM but I get an error Error: No system folder found!
How can I not even get started? I must be missing something basic here!
Kangburra said:
Sorry for dragging out an old thread but I thought I would have a go with this. I have the kitchen installed, I have put I9300XXDLI5_I9300OXADLI5_I9300XXDLI5_BTU.zip in the original_update and have the m0 file in tools/edify_defs
I then try and extract the ROM but I get an error Error: No system folder found!
How can I not even get started? I must be missing something basic here!
Click to expand...
Click to collapse
IIRC, the archive file must be a tar archive containing at least a system.img.
Sent from my GT-I9300 using Tapatalk 2
Theshawty said:
IIRC, the archive file must be a tar archive containing at least a system.img.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Can't I start with the ODIN file of the leaks? It must have a system image in it? Where do you start with this? I thought a whole flashable ROM would be ideal.
Kangburra said:
Can't I start with the ODIN file of the leaks? It must have a system image in it? Where do you start with this? I thought a whole flashable ROM would be ideal.
Click to expand...
Click to collapse
Extract the tar file and put the system.ext4.img and boot.img in the update folder.. Then Dxixda kitchen will recognize it..
Sent from the iPoop killer ==>>>
Kangburra said:
Can't I start with the ODIN file of the leaks? It must have a system image in it? Where do you start with this? I thought a whole flashable ROM would be ideal.
Click to expand...
Click to collapse
Oh yeah, I forgot, the system.img must be coverted from yaffs img to an ext4 file. I believe the utility is called ext2fs (or something like it)
Dsixda's tool should provide that program anyhow.
Well I unzipped the ROM and untarred the md5 and then it at least got me started. I am now just working out what I can do and what I need to get. Thanks for your help.
[edit]Well I built the ROM and tried both the update and updater scripts but both fail. Will go and re-read the help. [/edit]
Kangburra said:
Well I unzipped the ROM and unatarred the md5 and then it at least got me started. I am now just working out what I can do and what I need to get. Thanks for your help.
[edit]Well I built the ROM and tried both the update and updater scripts but both fail. Will go and re-read the help. [/edit]
Click to expand...
Click to collapse
Well that is the problem which I am not to work out yet.. As Dxixda kitchen does not support s3
Best way it to use meta-inf folder from other rom..
Sent from the iPoop killer ==>>>
As stated in the subject. How will I correct that?
I already searched but yes there is no application could execute the function selection but I don't know what/how to correct.
Pls help. Thanks
defaultthemes.apk missing or corrupt. Have you altered anything or running a stock based modified ROM?
sdk16420 said:
defaultthemes.apk missing or corrupt. Have you altered anything or running a stock based modified ROM?
Click to expand...
Click to collapse
Thanks for quick respond mate. Just what I am thinking.
I did flashing Pureness B13 apps + Timescape (from DJ JS thread) into Jelly Sandwich V6.
the result was great this was the only thing I'd like to fix for fully working tweaked ROM.
Hit the buttons for yah. Have a nice day!
Wait
Hmmm.. I did flashing it but nothing happened the problem still exist. Hmmmm... How is that now?
copy and paste stock DefaultThemes.apk or you can get some themes in neo themes and app section. fix permission to rw-r--r--. then reboot .
nah
I already flashed one mate.
Is there any difference between flashing and copy & pasting?
I think there is nothing. Same effect, it only differs in execution.
Correct me if I'm wrong.
chadrick_06 said:
I already flashed one mate.
Is there any difference between flashing and copy & pasting?
I think there is nothing. Same effect, it only differs in execution.
Correct me if I'm wrong.
Click to expand...
Click to collapse
Yes they have the same effect..
The only difference between the two is that flashing is done of the zip file which automatically replaces the apk files with the right permissions..
Whereas the other way is manual.. You have to manually copy the apk file into the root directory and apply the permissions by yourself!
Sent from my Xperia Neo V
chadrick_06 said:
I already flashed one mate.
Is there any difference between flashing and copy & pasting?
I think there is nothing. Same effect, it only differs in execution.
Correct me if I'm wrong.
Click to expand...
Click to collapse
No. they have same work, to copy/replace apk in /system.
which theme you flashed ?
Is there a way to deodex stock ROM without flashing another ROM? Like a batch file script or something? I don't want to leave the stock ROM but need to flash some Mods.
ShyamSasi said:
Is there a way to deodex stock ROM without flashing another ROM? Like a batch file script or something? I don't want to leave the stock ROM but need to flash some Mods.
Click to expand...
Click to collapse
using Dxda Kitchen...
sandy7 said:
using Dxda Kitchen...
Click to expand...
Click to collapse
I used that one. I was wondering to do this maybe a sh script without actually taking the whole ROM out like we have for Zipalign init.d script.
ShyamSasi said:
I used that one. I was wondering to do this maybe a sh script without actually taking the whole ROM out like we have for Zipalign init.d script.
Click to expand...
Click to collapse
use the search button....if iam not i have used a cwm flashable zip to deoxed stock rom
sandy7 said:
use the search button....if iam not i have used a cwm flashable zip to deoxed stock rom
Click to expand...
Click to collapse
I tried .. I'm looking something like this http://briefmobile.com/auto-deodex-tool-for-htc-one-x-att but the download link is not working.
There are lots like it..but for me kitchen is the best
sent straight from hell
ShyamSasi said:
I tried .. I'm looking something like this http://briefmobile.com/auto-deodex-tool-for-htc-one-x-att but the download link is not working.
Click to expand...
Click to collapse
Well u can try this..http://forum.xda-developers.com/showthread.php?t=1500475
sent straight from hell
hello i am using Xperia U.. i want to remove all bloatware from my phone. i have rooted my phone, i try to uninstall some apps like you tube,Gmail etc...with titanium backup.but after uninstalling my phone lags badly...
shanmukh.thakur said:
hello i am using Xperia U.. i want to remove all bloatware from my phone. i have rooted my phone, i try to uninstall some apps like you tube,Gmail etc...with titanium backup.but after uninstalling my phone lags badly...
Click to expand...
Click to collapse
You can use this one mate : http://forum.xda-developers.com/showthread.php?t=2070771 . Works fine, as members said, on ics.
THANK U...
shanmukh.thakur said:
THANK U...
Click to expand...
Click to collapse
It's better clicking thanks button than saying mate. This way the thread will have less posts and will not be a mess
DaRk-L0rD said:
It's better clicking thanks button than saying mate. This way the thread will have less posts and will not be a mess
Click to expand...
Click to collapse
btw De-bloater folder is empty????
shanmukh.thakur said:
btw De-bloater folder is empty????
Click to expand...
Click to collapse
You don't have to extract the file, you have to flash the attached file. Users reported that works, so don't think there is something wrong.
I know that there is a file named De-Bloater!!! inside the zip that is empty but since you don't have to install but uninstall apps i think the important file in this case is the META-INF one.
DaRk-L0rD said:
You don't have to extract the file, you have to flash the attached file. Users reported that works, so don't think there is something wrong.
I know that there is a file named De-Bloater!!! inside the zip that is empty but since you don't have to install but uninstall apps i think the important file in this case is the META-INF one.
Click to expand...
Click to collapse
After flashing file... all bloat ware app remove but, my wifi problem start. I try to resolve several times...flash .89 ftf file again flash munjeni's kernel and flash bloat zip file but same problem!!! can u plz fix this???
shanmukh.thakur said:
After flashing file... all bloat ware app remove but, my wifi problem start. I try to resolve several times...flash .89 ftf file again flash munjeni's kernel and flash bloat zip file but same problem!!! can u plz fix this???
Click to expand...
Click to collapse
on munjeni's kernel you have to install wifi modules. Don't know how to do that.
You can install another kernel. I am using this one http://forum.xda-developers.com/showthread.php?t=2299748 and have no problems at all.
Hello,
i recently upgraded to kitkat using following http://forum.xda-developers.com/showthread.php?t=2372286,, after this, my wi-fi wont turn ON..,, made complete wipe, re-installed 4 times using stock kernel, stock with permissions, AEL but none works,,
And also flashed non-hlos.bin modem.
Please help. Thank you.
I'm unable to reply to that thread mentioned due to forum rules.
coolvipcandy said:
Hello,
i recently upgraded to kitkat using following http://forum.xda-developers.com/showthread.php?t=2372286,, after this, my wi-fi wont turn ON..,, made complete wipe, re-installed 4 times using stock kernel, stock with permissions, AEL but none works,,
And also flashed non-hlos.bin modem.
Please help. Thank you.
I'm unable to reply to that thread mentioned due to forum rules.
Click to expand...
Click to collapse
i think your wifi modules are currupted or not working in the rom
so how to make it work now ??
copy from stock ?? or can't do that n have to install whole package ?
coolvipcandy said:
so how to make it work now ??
copy from stock ?? or can't do that n have to install whole package ?
Click to expand...
Click to collapse
if you have back up of your modules then replace with the current modules
if not work then flash the stock rom
I have a complete backup created via recovery as well as stock odin fw,, will it be the one in system>priv-app> or somewhere else ?
coolvipcandy said:
I have a complete backup created via recovery as well as stock odin fw,, will it be the one in system>priv-app> or somewhere else ?
Click to expand...
Click to collapse
you need to extract system.img file
long process
i think you should apply whole backup
system.img extracted,, whats next ?
making full backup restore will again take phone FW back to JB,, so i guess saving it as last resort.
coolvipcandy said:
system.img extracted,, whats next ?
making full backup restore will again take phone FW back to JB,, so i guess saving it as last resort.
Click to expand...
Click to collapse
replace wifi modules to system/lib/modules from your backup
Vaibhav Chauhan said:
replace wifi modules to system/lib/modules from your backup
Click to expand...
Click to collapse
Thanx for reply,, but which libs to be copied to be precise ??
there are many there !
coolvipcandy said:
Thanx for reply,, but which libs to be copied to be precise ??
there are many there !
Click to expand...
Click to collapse
in lib folder there is module folder
you must replace ath.ko and ath6kl_sdio.ko files from modules folder
Vaibhav Chauhan said:
in lib folder there is module folder
you must replace ath.ko and ath6kl_sdio.ko files from modules folder
Click to expand...
Click to collapse
No file found under that name, although i replaced other files in that folder, n rebooted device,, Negative.
Although i used a custom kernel "AEL" n this did the job for time being but still looking for solution as i do want the new kernel.
coolvipcandy said:
No file found under that name, although i replaced other files in that folder, n rebooted device,, Negative.
Although i used a custom kernel "AEL" n this did the job for time being but still looking for solution as i do want the new kernel.
Click to expand...
Click to collapse
means your rom contain no wifi modules
place that files in that folders