hi guys
my device is archos 80 G9 turbo 16GB.
after i update the firmware to 4.0.5 ,it did not work good and freezes more time and i must to reboot it again and again.
then i powered it on in recovery mode (vol down + on) and format system (full )
after that i copied the firmware 3.2.8-2 in the root of the drive which appeared in my computer .then i pressed the "ON" key to countinue.
after that the device prepared to read the file and after complete that ,screen went to black (going to reboot) but nothing happend .after that i can not power on my device in normal or recovery mode.
now i am wating to help of you and your guide.
excuse me about bad language(i can not better).
have you tried if you can boot in download mode?
have you tried if you can boot in download mode?
i can not boot the device.
just power led is light.
renopk said:
i can not boot the device.
just power led is light.
Click to expand...
Click to collapse
If your power led is still on...
try to press power button for at least 10 sec (force a hard reset).
Power led should go off afterwards.
Then try again to get in to recovery mode by pressing vol down + power button.
What happens?
Regards,
scholbert
If your power led is still on...
try to press power button for at least 10 sec (force a hard reset).
Power led should go off afterwards.
Then try again to get in to recovery mode by pressing vol down + power button.
What happens?
Regards,
scholbert
Click to expand...
Click to collapse
i did it several times but still nothing.
renopk said:
i did it several times but still nothing.
Click to expand...
Click to collapse
Can you enter recovery? (Vol Up + Power)
Tapatalked from Xperia Arc S
Can you enter recovery? (Vol Up + Power)
Tapatalked from Xperia Arc S
Click to expand...
Click to collapse
no i can not do that.
nothing on screen , it is black.
renopk said:
no i can not do that.
nothing on screen , it is black.
Click to expand...
Click to collapse
Then I'm afraid you have to contact service.
Then I'm afraid you have to contact service.
Click to expand...
Click to collapse
thank you for reply.
you think that there are no way to fix this problem?
renopk said:
thank you for reply.
you think that there are no way to fix this problem?
Click to expand...
Click to collapse
Without working recovery there is nothing you can do. Sorry.
gen_scheisskopf
Without working recovery there is nothing you can do. Sorry.
Click to expand...
Click to collapse
ok thanks but i am still waiting to response.
good luck.
Related
Archos 80 G9 - 250gb (firmware v 4.0.6) installed from archos website
I was in the process of rooting my device and now the device just keeps retstarting. It gets to the splash on screen and then goes off. I cannot get into the recovery menu.
Pressing power and volume does nothing, this happened after I installed firmware v 4.0.6,then installed sde firware which didn't update for some reason.
Any idea what can be done?
Thanks
msg72 said:
Archos 80 G9 - 250gb (firmware v 4.0.6) installed from archos website
I was in the process of rooting my device and now the device just keeps retstarting. It gets to the splash on screen and then goes off. I cannot get into the recovery menu.
Pressing power and volume does nothing, this happened after I installed firmware v 4.0.6,then installed sde firware which didn't update for some reason.
Any idea what can be done?
Thanks
Click to expand...
Click to collapse
You haven't copied the ext4 file. Reinstall the stock .aos file through a usb when in recovery > update firmware and copy the file again
Sent from my HTC Desire HD using XDA Premium HD app
Quinny899 said:
Reinstall the stock .aos file through a usb when in recovery
Click to expand...
Click to collapse
msg72 said:
cannot get into the recovery menu.
Click to expand...
Click to collapse
??
Shano56 said:
??
Click to expand...
Click to collapse
Likely he hasn't held down power for the 10 seconds
Sent from my HTC Desire HD using XDA Premium HD app
Hold down power button for 10sec. Wait while green led is turning off. Press Volume down button and power simultanously. When you see the Archos logo just leave the buttons untouched. Good Luck!
I will give that a go, I tired holding the power button for 20 seconds, 30 seconds with volume buttons pressed with no luck.
If this doesn't work what can I do, I only had the device for 2 months..
msg72 said:
I will give that a go, I tired holding the power button for 20 seconds, 30 seconds with volume buttons pressed with no luck.
If this doesn't work what can I do, I only had the device for 2 months..
Click to expand...
Click to collapse
It should work, I haven't heard of any bricks from what you've done. Just hold power for 10 secs, let your tablet sit for a few minutes, hold volume up and press the power. Dont let the volume go until you're in recovery
msg72 said:
I will give that a go, I tired holding the power button for 20 seconds, 30 seconds with volume buttons pressed with no luck.
Click to expand...
Click to collapse
Oh boy...
If installing of SDE failed your device got still the stock setup
Please try it like this step by step:
1. Power down the device completely by pressing the power button for at least 10 sec.
2. Press volume up and hold it
3. Press power button shortly (~2sec.) untill the green light goes on, then release power button.
4. Hold the volume up untill recovery screen appears.
Report...
Regards,
scholbert
scholbert said:
Oh boy...
If installing of SDE failed your device got still the stock setup
Please try it like this step by step:
1. Power down the device completely by pressing the power button for at least 10 sec.
2. Press volume up and hold it
3. Press power button shortly (~2sec.) untill the green light goes on, then release power button.
4. Hold the volume up untill recovery screen appears.
Report...
Regards,
scholbert
Click to expand...
Click to collapse
thats what i was trying to get at..you did a better job at explaining
Had a similar problem not getting into recovery after i did it hundred times succesful with my gen7 and my gen9 - thought it was bricked -
tried it later again and then i was in recovery.
Good luck!
Had a similar experience yesterday mine was in a continuous circle booting into SDE everytime shutting down and rebooting, managed to get into recovery and had to do a full format and download stock 4.0.6 from Archos website, got everything working again but a bit reluctant to try and root again.
gastro2012 said:
Had a similar experience yesterday mine was in a continuous circle booting into SDE everytime shutting down and rebooting, managed to get into recovery and had to do a full format and download stock 4.0.6 from Archos website, got everything working again but a bit reluctant to try and root again.
Click to expand...
Click to collapse
Thats only psychic.
If you go it on and have your files parat, its a thing of 5 till 12 minutes.
(But me too )
It worked thank you
Hi All.
I might be missing the obvious here but how do you get into recovery on these things?
I've read loads of posts and tried various combinations with Vol+/- and Power, Wait for the light then do the same..... Nothing!!
I've put root on it it but left the bootloader looked. The device says I can unlock it if I want. It's the 16GB Wifi model (UK)
Any ideas where I'm going wrong?
Thanks
zach181 said:
Hi All.
I might be missing the obvious here but how do you get into recovery on these things?
I've read loads of posts and tried various combinations with Vol+/- and Power, Wait for the light then do the same..... Nothing!!
I've put root on it it but left the bootloader looked. The device says I can unlock it if I want. It's the 16GB Wifi model (UK)
Any ideas where I'm going wrong?
Thanks
Click to expand...
Click to collapse
Maybe you;re mixing the fastboot method and cwm method on your head..
if you're question is how will you get to recovery then my answer is VOL UP.
power on your xtz and when the "SONY" shows up simply spam the vol up and you're good :good:
arcsuser said:
Maybe you;re mixing the fastboot method and cwm method on your head..
if you're question is how will you get to recovery then my answer is VOL UP.
power on your xtz and when the "SONY" shows up simply spam the vol up and you're good :good:
Click to expand...
Click to collapse
Thanks for the reply. If I'm reading what you put right, it's:
Hold Vol up
Press Power
Wait for Sony logo then ? Not sure what you meant by "when the "SONY" shows up simply spam the vol up"
Thanks
Please see this: http://forum.xda-developers.com/showthread.php?t=2401652
zach181 said:
Thanks for the reply. If I'm reading what you put right, it's:
Hold Vol up
Press Power
Wait for Sony logo then ? Not sure what you meant by "when the "SONY" shows up simply spam the vol up"
Thanks
Click to expand...
Click to collapse
Dude thats a HARD RESET, where did that came from
But if YOU are going to RECOVERY follow these steps:
POWER ON
SPAM VOLUME UP
and youre done
arcsuser said:
Dude thats a HARD RESET, where did that came from
But if YOU are going to RECOVERY follow these steps:
POWER ON
SPAM VOLUME UP
and youre done
Click to expand...
Click to collapse
Haha, Thanks for your help. I appreciate it.
I'm laughing because I still haven't got a clue what SPAM VOLUME means so I'm going to go for HOLD VOLUME.
zach181 said:
Haha, Thanks for your help. I appreciate it.
I'm laughing because I still haven't got a clue what SPAM VOLUME means so I'm going to go for HOLD VOLUME.
Click to expand...
Click to collapse
LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
how about you keep pressing the volume up until you boot to recovery. hope that helps
arcsuser said:
LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
how about you keep pressing the volume up until you boot to recovery. hope that helps
Click to expand...
Click to collapse
LOL, I even ended up on the Urban Dictionary... I'm thinking..Oh no, it's one of those young people phrases again!!
Thanks again for the help though, I'll get that dual recovery installed I think. I'm not even planning on flashing it. I just want a good backup.
Hello Zach181,
have succeeded in holding the vol up ?
I have the same trouble and can't access the recovery mode.
press power on
wait for the sony logo to appear
hold the vol up button
but nothing happens, it boots in the normal way.
thanks
Let's try to make it clear.
The device does not come from factory with any button combination that can get you into any recovery.
You need to flash a custom recovery first.
The process for "XZDualRecovery" is to wait a second after the sony logo appears and then when the notification light turns green hold Volume Up for CWM, Volume Down for TWRP.
Might be different for other recoveries, but at least try this method.
Let me clear it too...
its NOT HOLD
but SPAM or KEEP PRESSING
:good::good::good:
arcsuser said:
Let me clear it too...
its NOT HOLD
but SPAM or KEEP PRESSING
:good::good::good:
Click to expand...
Click to collapse
What works for me is HOLD the correct volume button, but not from the start, but from the time the LED turns green.
My Gnexi said:
What works for me is HOLD the correct volume button, but not from the start, but from the time the LED turns green.
Click to expand...
Click to collapse
Well thats different.. Because i believe HOLD is for fastboot..
Sent from my SGP311 using xda app-developers app
arcsuser said:
Well thats different.. Because i believe HOLD is for fastboot..
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
I must admit that I have put it in fastboot but only if holding from the power on and not pressing repeatedly. I've been too engrossed with my new toy to try much but I will sort recovery today.
So what we are saying is...
No recovery Installed
Power and hold Vol up = Fastboot
Recovery Installed
Power (Wait for light) Vol up = CWM ---- Vol Down = The other one (Forgot the name)
That still leaves us with fastboot mode with recovery. Would that be as I said at the beginning of this post... Power on and hold Vol Up straight away (Don't wait for the light)
.
Hi , Guys today i was trying to install a custom rom on my hox+ (cyanogen mod 10.2) well the thing is that after installing the custom rom from recovery mode i got the htc one screen and then the cyangogenmod logo , the problem here is that it was spining for over 1 hour and i tried restarting it... the thing is that it entered on a "infinite bootloop" and i tried to use the command ( volume - + Power Button) and it wont enter booloader nor recovery or fastboot mode... so i was wondering if anybody can help me down with this issue.. or in any case please tell me if this phone dosen't work anymore.. please help me i'm desperate.. thanks...
Zero1922 said:
Hi , Guys today i was trying to install a custom rom on my hox+ (cyanogen mod 10.2) well the thing is that after installing the custom rom from recovery mode i got the htc one screen and then the cyangogenmod logo , the problem here is that it was spining for over 1 hour and i tried restarting it... the thing is that it entered on a "infinite bootloop" and i tried to use the command ( volume - + Power Button) and it wont enter booloader nor recovery or fastboot mode... so i was wondering if anybody can help me down with this issue.. or in any case please tell me if this phone dosen't work anymore.. please help me i'm desperate.. thanks...
Click to expand...
Click to collapse
Hold down the power button till it powers down ur device.....it wont take more than 10 to 15 sec...
Once it is powered down hold the (volume down + power button) to get into bootloader.......
17 4839458
[email protected] said:
Hold down the power button till it powers down ur device.....it wont take more than 10 to 15 sec...
Once it is powered down hold the (volume down + power button) to get into bootloader.......
Click to expand...
Click to collapse
Hi , It wont turn off (by holding the power button) it keeps reseting... and won't enter the bootloader.... any other idea?
Zero1922 said:
Hi , It wont turn off (by holding the power button) it keeps reseting... and won't enter the bootloader.... any other idea?
Click to expand...
Click to collapse
Idea is to get into fastboot....
BTW what do u mean by reseting (reboot)......
Just Hold the power button when the screen goes of hold the Volume Down + power button it must take you to the fastboot........??:fingers-crossed:
[email protected] said:
Idea is to get into fastboot....
BTW what do u mean by reseting (reboot)......
Just Hold the power button when the screen goes of hold the Volume Down + power button it must take you to the fastboot........??:fingers-crossed:
Click to expand...
Click to collapse
It keeps rebooting when i try to power off the device... command Volume Down + power button is not doing anything... Help please! is there any other method?
Zero1922 said:
It keeps rebooting when i try to power off the device... command Volume Down + power button is not doing anything... Help please! is there any other method?
Click to expand...
Click to collapse
No...there is no other way...
maybe U are doing something wrong .......
The device is stuck on CM10 screen keep holding the power button at some time the screen goes off...
at that point immediately hold the Volume Down no matter what don't leave it until it takes u to the bootloader.......
Zero1922 said:
It keeps rebooting when i try to power off the device... command Volume Down + power button is not doing anything... Help please! is there any other method?
Click to expand...
Click to collapse
breathe
listen
hold vol down + power and keep holding it until the device reboots and then it will go straight into hboot\bootloader
AND
RELAX
[email protected] said:
No...there is no other way...
maybe U are doing something wrong .......
The device is stuck on CM10 screen keep holding the power button at some time the screen goes off...
at that point immediately hold the Volume Down no matter what don't leave it until it takes u to the bootloader.......
Click to expand...
Click to collapse
You are god! :victory:
Hello Everyone,
My Micromax Nitro A311 is showing No Command witha red triangle in the Android Robot Stomach. I am not able to do anything. Also the Volume up button is not working.
Please help. I am becoming handicapped.
Thanks.
csr1981 said:
Hello Everyone,
My Micromax Nitro A311 is showing No Command witha red triangle in the Android Robot Stomach. I am not able to do anything. Also the Volume up button is not working.
Please help. I am becoming handicapped.
Thanks.
Click to expand...
Click to collapse
What did you try to do before you were able to use your phone for the last time???
Sahilsinghlodhi said:
What did you try to do before you were able to use your phone for the last time???
Click to expand...
Click to collapse
I didn't do anything. The phone was in my pocket and when i took out to make a call I saw nothing was on the screen. Only the LED on top was blinking.
So i pressed the power button to switch OFF and ON. After that it never turned ON.
Also I had rooted the phone before using the King Root App. But never installed a Custom ROM.
csr1981 said:
I didn't do anything. The phone was in my pocket and when i took out to make a call I saw nothing was on the screen. Only the LED on top was blinking.
So i pressed the power button to switch OFF and ON. After that it never turned ON.
Also I had rooted the phone before using the King Root App. But never installed a Custom ROM.
Click to expand...
Click to collapse
After you get no command screen try to press power and volume up button or power and volume down button.
Try holding the power button for few seconds. Of no success then you need to flash a custom recovery (TWRP) using YGDP and thn zip rom. Or stock rom using YGDP.
Sahilsinghlodhi said:
After you get no command screen try to press power and volume up button or power and volume down button.
Try holding the power button for few seconds. Of no success then you need to flash a custom recovery (TWRP) using YGDP and thn zip rom. Or stock rom using YGDP.
Click to expand...
Click to collapse
I tried pressing the power and volume down button (as my voulme up button is not working) but it didn't help.
I am not familiar with TWRP & YGDP. Can you please guide me in providing the details and link for downloading these. Also which Custome ROM woluld be suitable for my device.
Thanks.
csr1981 said:
I tried pressing the power and volume down button (as my voulme up button is not working) but it didn't help.
I am not familiar with TWRP & YGDP. Can you please guide me in providing the details and link for downloading these. Also which Custome ROM woluld be suitable for my device.
Thanks.
Click to expand...
Click to collapse
You won't be able to do anything without volume up button. Get it repaired first as only vol up button is used to load into recovery mode and after that everything else can be done.
Sahilsinghlodhi said:
You won't be able to do anything without volume up button. Get it repaired first as only vol up button is used to load into recovery mode and after that everything else can be done.
Click to expand...
Click to collapse
When i restart the phone and press the power button i get the recovery options. And when i press the volume down button i move through the options. But when i press the power button again for enter, the options go away.
csr1981 said:
When i restart the phone and press the power button i get the recovery options. And when i press the volume down button i move through the options. But when i press the power button again for enter, the options go away.
Click to expand...
Click to collapse
Try pressing home or menu button for enter.
And factory reset the phone.
Sahilsinghlodhi said:
Try pressing home or menu button for enter.
And factory reset the phone.
Click to expand...
Click to collapse
No Luck. I tried pressing the buttons but response.
csr1981 said:
No Luck. I tried pressing the buttons but response.
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=tJoJO4NJRDI
Hi,
after a Rom update (LIONAGEOS) my LeMax2 was boot-looping in Fastboot mode. I was able to switch to TWRP recovery, however OTP storage was not mountable. Back in fastboot I pressed power + Vol up and Vol down. Since then phone would not reboot at all. No activity when connecting to USB cable, nothing. Any idea if there is a chance to wake up the phone back to live?
Thanskd for any advice.
rompip said:
Hi,
after a Rom update (LIONAGEOS) my LeMax2 was boot-looping in Fastboot mode. I was able to switch to TWRP recovery, however OTP storage was not mountable. Back in fastboot I pressed power + Vol up and Vol down. Since then phone would not reboot at all. No activity when connecting to USB cable, nothing. Any idea if there is a chance to wake up the phone back to live?
Thanskd for any advice.
Click to expand...
Click to collapse
Hi rompip,
Can you reboot the terminal in fastboot mode : "vol -" and "power" for 5-10 sec ?
Do you have battery ?
When you plug it in charge, does it work ?
Best regards.
Max.
Keep in mind that if your phone goes by itself in the QDLoader mode, it’s better to try some combinations below:
1) Keep the power button pressed for about 2 minutes, or
2) Keep the power button + Vol up pressed for about 2 minutes, or
3) Keep the power button while connecting the phone to a wall charger, or
4) Bring the phone into a bright light and press the power button (or power button + Vol up) for about 2 minutes, or
5) Keep the phone charging for more than 24 hours and repeat all the steps above.
AhmadSant said:
Keep in mind that if your phone goes by itself in the QDLoader mode, it’s better to try some combinations below:
1) Keep the power button pressed for about 2 minutes, or
2) Keep the power button + Vol up pressed for about 2 minutes, or
3) Keep the power button while connecting the phone to a wall charger, or
4) Bring the phone into a bright light and press the power button (or power button + Vol up) for about 2 minutes, or
5) Keep the phone charging for more than 24 hours and repeat all the steps above.
Click to expand...
Click to collapse
Hi AhmadSant,
thanks, long Power pressing (approx. 1 minute) worked for me!!! Do you have any advice how to get rid of the Fastboot bootloop? I can enter into recovery, would I need to perform a full wipe?
Thanks again for your assistance.
rompip said:
Hi AhmadSant,
thanks, long Power pressing (approx. 1 minute) worked for me!!! Do you have any advice how to get rid of the Fastboot bootloop? I can enter into recovery, would I need to perform a full wipe?
Thanks again for your assistance.
Click to expand...
Click to collapse
I think that the easy way to get rid of all that problem is to unbrick it and go back to stock ROM. Here
AhmadSant said:
I think that the easy way to get rid of all that problem is to unbrick it and go back to stock ROM. Here
Click to expand...
Click to collapse
I assume it was the SULINUX, works again, thanks! :good:
rompip said:
I assume it was the SULINUX, works again, thanks! :good:
Click to expand...
Click to collapse
Perfecto