Hello again, I got the Prime today but the screen has a bow at the top in the middle. It is not flush with the rest of the tablet. The other problem is it doesn't seem to be charging so I am a bit confused about that. Any thoughts?
Thanks,
First thought is you should maybe think about swapping it out. It shouldn't bow in the middle at all. Mine is flat as are all the ones I've played with in stores.. Second thought is it should also be charging lol .. what's your plan for when the battery dies???
Sounds like a dud to me. I'd swap it if I were you maybe
Sent from my SGH-I777 using Tapatalk 2
Ok, seems to be charging now but the bow seems a worry.
Yeah.. I wouldn't feel comfortable with a bow in the middle
Sent from my SGH-I777 using Tapatalk 2
Exchange it where you bought it from.
Its going back tomorrow. There is nothing wrong with the tablet other than GPS. Wi Fi is great. Seems like its just a loose clip or something.
Swap it out. There shouldn't be any bow in it. Tablet should be flat. Don't wait and swap it out immediately.
lol how is this even a question? we all know Asus QC is crap, any imperfections swap it out ASAP!
Hey... mine didn't come with a bow?!?
Wonder if it's too late to exchange it for one with a bow on top.
Got my second one and from what I have seen it has no light bleed and the frame is all good. I haven't really tuned it on I only saw the screen when it was showing me it needed charging.
Well the second one is great,b but with bith of mine I occasionally get a faint clicking noise whenever I hit the back,home or multitasking button and when I pick up an app on the home screens. Anyone else get this?
mdemons12 said:
Well the second one is great,b but with bith of mine I occasionally get a faint clicking noise whenever I hit the back,home or multitasking button and when I pick up an app on the home screens. Anyone else get this?
Click to expand...
Click to collapse
a faint clicking noise when hitting an onscreen software button? if so, cut off the sound for onscreen touches and such. doesn't really make sense. just sounds like you have it to make sounds when you press something on the screen. this can be cut off in the settings.
Ok, thanks for that. The last thing seems to be the battery. I read the instructions for once and it said to charge it all up. So i charged it till it was green and then powered it up for the first time. So as the instructions say i need to break the battery in. At the moment i am getting about 5-6 hours. The pad is on balanced with auto brightness. Does this seem normal for new battery. I would hope to end up with 9-10 or are my expeditions too high?
I will do a new topic cos its a new question
Related
Hi to everyone in this forum. I've recently received as a present a new toshiba folio 100, but, since I'm experiencing an annoying menu button flashing, I've thought of it as a software problem so I upgraded the folio using the foliomod1.3c and applied the rotate patch and also the 1.3c fix patch. The menu still flash with no apparent logic. I've tried to kill all applications running and it's still there. It seem to come up and down at random. I ask to all in this forum: do you believe it's a hardware issue or is a software issue? Because if it's a hardware issue I'm going to try to have a new folio from toshiba. I'm overall very pleased with the work that Dexter made to make the folio an usable machine but this flashing is driving me crazy. I use the folio basically as a portable scientific pdf reader so I need to concentrate on what I read and this flashing is really annoying. I would like very much to thank you all in this forum in advance for all the suggestion/help you could provide.
use my "foliobuttons" app
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I have a request that serve All those who suffer MENU crazy button .
Is it possible to prepare application you can setting ON/OFF the MENU button
Most of the time useless button.
sometimes button jump after 10 minutes, sometimes after an hour
Usually I fix the problem by changing the settings with FolioButtons 1.1.
If you could add to FolioButtons on/off operation for menu Buttons was the best.
Hi teknoraver,
Can you add enabled/disabled menu button in foliobuttons application ?
flashing on...
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I am pretty desperate about this issue, because none of the methods seem to help...
Right now the buttons work opposite- Menu button flashes mad and none of the other 3 responds...dont know how it happened
Just a thought- while the folio is booting up the menu button ALREADY flashes! I have zero understanding in there but isn't it a process that loads / starts early in the line?
I appreciate everyone's effort trying to solve this bug as it makes this handy tool a useless pile of crap.
I was wondering how many folio users are suffering of this crazy buttons madness.
Mine was crazy from the very beginning; I sent it back for repair and toshiba only did a firmware restore... Nothing changed at all!
It makes my folio almost unusable!
bye bye crazy buttons
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
I think it's a hardware issue and even a build quality issue.
If i hold my folio at the side of the buttons, i get the flashing buttons problem (even the foliobuttons app will not help), if i hold it at the other side, i've got no problems at all.
Do you have an animated background? Because I saw that some people had this issue with an animated background...
Hi Mshr73, nice first post indeed
Could you post some pictures of what you did?
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
seems to get better...
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
vietnamibalzsam said:
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
Click to expand...
Click to collapse
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
I just tested without thickness under the screen, with foliomod 1.4 and after a few hours I again the problem of crazy buttons.
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
Well, I just finished dismantling e reassembling my Folio. Following your hint, I cut a piece of paper and put it between the audio connector and the back of the screen (yes, it was metal vs metal). I'll see whether it's gonna work or not. Crossing fingers for now.
Not that I'm so confident in leaving a piece of paper stuck right where the DC input is .
BTW, did you try with a smaller thickness? Even if this is the problem, I'm wondering whether a piece of paper would be enough or not.
thyself can someone. post pictures of before and after details?
we will be much appreciated
i didn't have the crazy buttons issue this far in 2 weeks, just my home butten needs to be pressed harder. I'm pretty sure it's hardware related, i read often that users experience it when changing from an warm room to a colder one, or in regions where its verry humid(some circuit closes maybe...). so Mshr73 is on the right way as far as i can tell.
Dexter's 1.4
^Sbk79^ said:
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
Click to expand...
Click to collapse
Really sorry mate, I hope it will solved this for others too...
Anyhow, it is so disturbing, that I was already considering to send the tablet back to Toshiba...
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Mshr73 said:
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Click to expand...
Click to collapse
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
^Sbk79^ said:
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
Click to expand...
Click to collapse
Well ... with a piece of paper the problem Come back.
I handed a piece of cardboard and the problem disappears.
I think that to raise the screen to solve them but I'm still not 100% sure.
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Not mine....
dmcduck said:
Has anyone noticed the power button being extra sensitive? That is to say, on the Hero/Evo, you had to hold the power button for at least 2 seconds before the pop-up Power Options menu would display. On my 3vo, it pops up in less than a second. I'm finding it slightly annoying, because the space between "sleep" and "power options menu" is too narrow.
Click to expand...
Click to collapse
work on reseating the back shell of the phone, i had the issue too at first and i thought it was a defect, but i played with it a couple times and got it to work like a normal power button
Nope not at all, I actually have to press it more than once sometimes and harder the second time for it to work......
yea mine is a lil sensitive...cant have it my pocket because of it..pulled it out a couple times and the phone bouncing around in my pocket opened apps and almost called ppl
Throw an OtterBox on there....
you have to give it a little lovin- WON"T happen by accident.
Also - saved my3D from a nice 5 foot drop courtesy of some Crazy 3 yr olds on the 4th.
mine is like that and I hate it!!!
U guys have cases on the phone? I guess not
Sent from my PG86100 using XDA Premium App
I actually find the new power button a little bit better to my liking, a lot easier to find in a blind poweron. But I do agree that it might be a little too sensitive. I've found that the phone turns itself on while in my pocket - which is a bad thing because on shake the led flashlight turns on lol! Of course that kills the battery...
Also when trying to turn on or off... sometimes i see the turn off, reboot menu pop up which just simply put, never happened with the evo og. And while i like the ease of use and how fast it reacts to turning off/on, it seems to be a bit of a problem ATM
not not at all sensitive. it's actually under sensitive. some time i get frustrated because i have to push it so hard in the exact sweet spot just to get it to turn on. after having it for over a week now it's getting better, but at first i couldn't even get the thing turned on.
Not mine in fact mine is kinda hard to push. I'm going to the Sprint store I bought mine from this weekend to see if I can get it switched out because I have light leaking through the ring that surrounds the search key, and it bugs the hell out of me lol. So I hope my new one is gonna be normal.
This happens to me with or without the case. I did have a very brief time where the power button would not respond at all, and discovered that the back was causing it (I had swapped the OEM 8G card for my 32).
I don't think this is a big enough problem for me to try and swap the phone out, although it is a little annoying. I suppose in time I'll learn not to push the power button too long.
I have the same problem with the sensitive power button but I'm on a Samsung Galaxy S. I'm wondering if there is dust in the way... Anybody ever find a fix or diagnose the problem for this? I've seen the same problem across multiple devices on the forums so I am starting to believe its a wear and tear type of thing.
Mine is kinda sensitive. But not as sensitive as the one I saw at my local sprint store. Interesting how it seems like no two EVOS are the same.
Good thing though is that since the button is built into the backcover... Maybe picking up another one can deliver a more sensitive/stiff experience.
Sent from my PG86100 using XDA App
has anyone else noticed that when you answer a phone call the screen turns off ...I hate it ...I have to hit the power button to wake the phone up and end the call .. does anyone have a fix for this ? thanks in advance
thats how all phones have been
is this your first smart phone bro?
if u dont cover the sensor it wont shut off
The screen should only turn off when you put it to your face . Once you pull away the phone the screen should wake . Check your settings you shouldn't have to use the power to wake it .
flex360 said:
thats how all phones have been
is this your first smart phone bro?
if u dont cover the sensor it wont shut off
Click to expand...
Click to collapse
no this is isnt my first smart phone..but the problem is that when I move my face away from the phone the screen should wake up
FlaXB9R said:
The screen should only turn off when you put it to your face . Once you pull away the phone the screen should wake . Check your settings you shouldn't have to use the power to wake it .
Click to expand...
Click to collapse
yea I know right lol ....I looked into the settings and haven't seen any controls for that feature
Yea I noticed the same thing. During a call pulled phone away from my face and screen stayed off. I thought something was wrong but if the call is active screen will come back on, if person hangs up and ur not quick to uncover sensor the screen stays off.
do you guys have screen protectors on your phones??? zaggs perhaps??
If anything is "blocking" your sensor, then it assumes that your face is up to the phone. The phone would then only wake up when the call is ended or the power button is pressed.
You must not have ANYTHING covering the sensor
I would say that this is most likely the case
Mine doesnt do that unless I put the phone up to my ear. Normally I just answer the phone and click it to speaker. When I do that the screen stays on....unless my hand/finger happens to be covering the light sensor.
I have Invisible Shield HD. And there's a cutout for the prox. sensor. Have the same problem. Hopefully HTC will fix it on the next firmware update
Sent from my EVO using xda premium
johnnymcmahan said:
You must not have ANYTHING covering the sensor
I would say that this is most likely the case
Click to expand...
Click to collapse
I'm not so sure about that. My OG Evo has a standard screen protector that "covers" the sensors, and they still work just fine. Maybe those crappy Zagg orange peels will interfere, but I still don't see that being too likely, as they're not really blocking any light.
I have this issue as well and after reading all over for the past two days it appears some units have this issue and some don't. Further complicating the issue is the fact some have screen protectors and some don't. Some have made cutouts on their screen protector and then it works as it should. Very weird.
As soon as I make a call the phone screen goes black while laying on my desk. When the call is over sometimes I can hit the power button to disconnect the call...sometimes I have to hold the power button down 10 seconds to soft reset the phone or I cannot get back to any screen and the call stays connected. Very weird. I got my phone at BB so I am going to stop back and see if they have had any returns and what their thoughts are.
Sent from my EVO using Tapatalk 2
i got my zagg lastnight and it happened
so i reapplied it, not covering the sensor on the top left
and it fixed the issue
flex360 said:
i got my zagg lastnight and it happened
so i reapplied it, not covering the sensor on the top left
and it fixed the issue
Click to expand...
Click to collapse
Yeah I wish that was my issue....I don't have a screen protector on my phone and it doesn't work as designed.
Sent from my EVO using Tapatalk 2
I bought a Zagg and had the issue. They left a hole for a sensor but I think that's the light sensor with the proximity sensor being just to the left and covered. It's a small red light that turns on when making a call. So I made the hole bigger by making it a rectangle uncovering the proximity sensor. Now my phone goes on and off like it should when putting it to my ear. Maybe that'll help some of you? Though I have read some people having the issue without screen protectors.
shadowmikel said:
has anyone else noticed that when you answer a phone call the screen turns off ...I hate it ...I have to hit the power button to wake the phone up and end the call .. does anyone have a fix for this ? thanks in advance
Click to expand...
Click to collapse
Not sure if this will help or not, but in settings/accessibility settings there is an option to end calls using the power button. Might help.
OK, this is a bit OT so I apologize. But I can't figure it out and really dont feel it warrants a new thread. I hope you dont mind me dropping this in here.
Yesterday, at some point, this icon came into my notification bar and i CANNOT, for the life of me figure out what it is.
It looks kinda like a hearing aid or Bluetooth headset icon. But I use neither. I've looked all thru settings trying to figure it out. Checked thru accessibility . Just stumping me, and making me feel REALLY stupid.
Much thanks to anyone who knows.
sent from my Evo LTE, usually.
I experienced the same issue with the screen turning off as soon as I placed a call. I pulled the Zagg HD off and the issue was resolved. I'm going to best buy today to exchange the Zagg for a new one and I will cut a little notch into it to see if it works.
After the screen goes off you have to press the power button but that little red dot next to the proximity sensor stays on unless you flash a bright light on it. I think regardless the proximity sensor is really sensitive and the Zagg HD just makes it that much more finicky.
Being in a dimly lit area makes it worse too.
**Update**
I went to bestbuy and exchanged my Zagg HD for a new one. I got home notched the cutout for the sensor a little more. Installed it and now I don't have any issues with the screen turning off.
scottspa74 said:
OK, this is a bit OT so I apologize. But I can't figure it out and really dont feel it warrants a new thread. I hope you dont mind me dropping this in here.
Yesterday, at some point, this icon came into my notification bar and i CANNOT, for the life of me figure out what it is.
It looks kinda like a hearing aid or Bluetooth headset icon. But I use neither. I've looked all thru settings trying to figure it out. Checked thru accessibility . Just stumping me, and making me feel REALLY stupid.
Much thanks to anyone who knows.
sent from my Evo LTE, usually.
Click to expand...
Click to collapse
Settings/Call Uncheck Hearing aids
Slayer, I'm gonna thank every post if yours I see over the weekend lol.
Thanks. I feel like an idiot. I looked in accessibility thinking any hearing aid stuff would be there
sent from my Evo LTE, usually.
scottspa74 said:
Slayer, I'm gonna thank every post if yours I see over the weekend lol.
Thanks. I feel like an idiot. I looked in accessibility thinking any hearing aid stuff would be there
sent from my Evo LTE, usually.
Click to expand...
Click to collapse
LOL anytime......and no worries we all get stuck at some point.
I just got my first gs3 5 days ago. Love it, but yesterday i noticed a dot on the screen in the lower left quadrant. I could only see it when the screen was off and under direct light. I tried cleaning it, but it was still there, i could also feel a little abrasion when i ran my finger over it. So i take it back to best buy, tell them what's up and they swap it out, no problem. The guy said it could have been either an air bubble in the screen, or the chip could have over heated causing a "blister" to raise up. "Weird cause I've only had it for a few days, and haven't even rooted it yet" So i get it, had to go to work right after so i didn't have much time to play with it. I wake up this morning and i notice that when the screen is on a black background, like the messaging app, or something similar, i can see a "darker" dot in around the same place where i had the problem on my last one, i can also see several other smaller ones around the screen. The dots are easy more noticeable when i turn the brightness up. This is the 16 gig Sprint model, is anyone else having similar issues with their phones? I'm going to go back up there tomorrow to try and swap it out again, hopefully they don't give me and flak about it.
Sent from my SPH-L710 using xda premium
Zor Omega said:
I just got my first gs3 5 days ago. Love it, but yesterday i noticed a dot on the screen in the lower left quadrant. I could only see it when the screen was off and under direct light. I tried cleaning it, but it was still there, i could also feel a little abrasion when i ran my finger over it. So i take it back to best buy, tell them what's up and they swap it out, no problem. The guy said it could have been either an air bubble in the screen, or the chip could have over heated causing a "blister" to raise up. "Weird cause I've only had it for a few days, and haven't even rooted it yet" So i get it, had to go to work right after so i didn't have much time to play with it. I wake up this morning and i notice that when the screen is on a black background, like the messaging app, or something similar, i can see a "darker" dot in around the same place where i had the problem on my last one, i can also see several other smaller ones around the screen. The dots are easy more noticeable when i turn the brightness up. This is the 16 gig Sprint model, is anyone else having similar issues with their phones? I'm going to go back up there tomorrow to try and swap it out again, hopefully they don't give me and flak about it.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Known issue on this type of screen. There is another thread burried somewhere about it. Every gs3 phone has it.
Sent from my SGS3
jjlean said:
Known issue on this type of screen. There is another thread burried somewhere about it. Every gs3 phone has it.
Sent from my SGS3
Click to expand...
Click to collapse
Not every screen has this. However over time every screen will have the problem. As far as I can tell I have none. Plus the other model that I had also didn't have any dots that I could see. I know it could have also been minimal. but it is a known issue with these screens has the other poster stated. Worth returning over? I don't think so.
I could understand having this problem a year down the road, but 1 day after first turning on the phone! That sounds a little much. I think I'll try returning it one more time...maybe 3rd times a charm?
Sent from my SPH-L710 using xda premium
That's AMOLED for ya. If you only see one dot...you're lucky. Hope you don't get one with 5 or more. :angel:
The dots/bleed marks should NOT be more visible when you turn the brightness up, they should be less visible at higher brightness.
Take it back, get another one. Keep doing it until you're satisfied.
ingenious247 said:
The dots/bleed marks should NOT be more visible when you turn the brightness up, they should be less visible at higher brightness.
Take it back, get another one. Keep doing it until you're satisfied.
Click to expand...
Click to collapse
+1!
Also I have an ATT model. I checked a friends and I didn't see any one his as well. He also had ATT. Not that it matters much just saying.
Also you can use this app...CHange your brightness up as far as you would like to help check for the dots/ink...
https://play.google.com/store/apps/...DEsImRlLmxhcHBlLnRpbS5hbmRyb2lkLmxjZHRlc3QiXQ..
Great small app. Also helps to see if you have any dead pixels!
hope this helps you out...
Cheers...
Thanks for the app recommendation. Tried it and didn't see any dead pixels or dots on any of the screens. In fact, i can't see the dots that i did before! I don't know if it's because it's brighter out versus when i was looking last night? I guess I'll keep an eye on it for the next few days and see if it gets worse. Would this problem get worse over time or is this just something that is there and will always be there? Thanks.
Sent from my SPH-L710 using xda premium
I would have kept the first one, if you're critical enough you can find some kind of a defect in any phone.
Zor Omega said:
Thanks for the app recommendation. Tried it and didn't see any dead pixels or dots on any of the screens. In fact, i can't see the dots that i did before! I don't know if it's because it's brighter out versus when i was looking last night? I guess I'll keep an eye on it for the next few days and see if it gets worse. Would this problem get worse over time or is this just something that is there and will always be there? Thanks.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
From what I understand it can get worse as time goes on. same with any burn ins and so on. Again this is what I understand. By the this time next year I will be replacing this device anyways in most cases unless nothing good comes out.
i wouldn't worry about it if its gone. Could it have been some type of bleed effect or something? I don't know. I'd just watch it for now. Check it so often. If you end up not minding it (If there even if an issue..) then i would keep the device. At higher brightness settings is when you can see it from my understanding. Again I could be 100% wrong. Wouldn't be the first time!
Cheers...
Zor Omega said:
Thanks for the app recommendation. Tried it and didn't see any dead pixels or dots on any of the screens. In fact, i can't see the dots that i did before! I don't know if it's because it's brighter out versus when i was looking last night? I guess I'll keep an eye on it for the next few days and see if it gets worse. Would this problem get worse over time or is this just something that is there and will always be there? Thanks.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
In mine you can only see it in just the right light. Dull light.
Sent from my SGS3
Yeah, I'm just going to keep it i think unless something drastic happens. I could only see it when it was dark and i had to look hard for it, but with these devices you want it to be flawless. Thanks for the comments and such. I'll keep an eye on it for the time being.
Sent from my SPH-L710 using xda premium
Hey guys. I was using my phone to check email, browse facebook, normal stuff. When all of the sudden it emitted a high-pitch squeal and shut off. That was an hour ago. I've been unable to get it to come back on. If i pull the battery and reinsert, it'll show the Samsung logo before beginning and endless series of vibration pulses. It won't stop unless I pull the battery. I've tried getting into recovery, no luck. I tried putting it into Odin mode, but as soon as the Odin screen loaded, the phone went black and back into the vibration pulsing. I've tried pulling the SIM, memory card, new batteries, anything I can think of. I've got plenty of backups on my SD card, so wiping it isn't an issue if i could just get to a recovery screen.
Any ideas what the hell this is??
Bad battery.
Stuck power button.
Your power button may be stuck. Try flicking it with your finger.
Well, i tried booting it with only the wall power connected, no battery, but nothing. I tried flicking the power button to loosen it, but no joy there either. It feels like the power button is releasing itself like it should, doesn't feel stuck. I could possible spray a tiny bit of switch cleaner in there to loosen things up.
EDIT: What is a stuck power supply supposed to feel like? Mine feels like it's making a full movement. There's a solid click on a full press and a smaller click when releasing it. Feels like it's working. I'm tempted to just crack her open and get a better look. I'm on a replacement Blackberry while my note is down and this dumbphone is KILLING me! Gotta get the note back up and running.
The power button looks like this on the inside.
It's a tiny micro switch. Sometimes the tiny mechanics get stuck on the inside. When it's stuck, it constantly reboots. It's a very common problem and sometimes an easy fix.
Parts of your problem resemble a bad battery like capt mentioned. As well as the stuck power button symptom. You can take the phone apart and try to clean it. It's not hard to do. Spraying in the external button probably won't reach the actual button though. Sorry if our first two ideas aren't fixing your issue. Maybe someone else will come along with another idea.
I'm pretty sure we are correct.
It's the power button mine does that when it sticks high pitched noise then the black screen with vibrations
Sent from my SAMSUNG-SGH-I717 using xda premium
mv1luv said:
It's the power button mine does that when it sticks high pitched noise then the black screen with vibrations
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
This is EXACTLY what I experienced, noise and all. Sounds like I need to take my phone apart and examine that switch. Is it as easy as blowing compressed air (PC cleaner type) through it to clear it?
EDIT: Well, I gotta give it to you guys. You were spot on. I took the phone apart and really did nothing more than tap on the switch directly and it booted right up. I hit it with some canned air just to be safe and clean it all out. It's currently charging back up and looking fantastic at this point! Thank you guys so much. You've saved me from having to go any longer with a Blackberry!!
Glad to hear you're up and running again! This pesky power button issue has plagued many.
Please edit the subject line to say [solved] so others searching may be saved.
SilverStone641 said:
This is EXACTLY what I experienced, noise and all. Sounds like I need to take my phone apart and examine that switch. Is it as easy as blowing compressed air (PC cleaner type) through it to clear it?
EDIT: Well, I gotta give it to you guys. You were spot on. I took the phone apart and really did nothing more than tap on the switch directly and it booted right up. I hit it with some canned air just to be safe and clean it all out. It's currently charging back up and looking fantastic at this point! Thank you guys so much. You've saved me from having to go any longer with a Blackberry!!
Click to expand...
Click to collapse
Thank you for posting your resolution. Many don't and it kind of leaves us hanging as to whether or not suggestions helped.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
captemo said:
Thank you for posting your resolution. Many don't and it kind of leaves us hanging as to whether or not suggestions helped.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Thanks!! In the spirit of helping others plagued by this issue, it's interesting to note that my power button always "clicked" like it was making good contact, but never worked. As soon as I cleaned the switch, it started working, the click stayed the same either way. Moral is, even though the power button feels like it's working, CHECK IT!! :highfive: