Related
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
askmattrix said:
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
Click to expand...
Click to collapse
there have been other threads about this. usually its the charger overheating and putting it in a ziplock in the freezer, resets it.
Mine did that too, just leave the charger and everything unplugged from the wall for a day. That fixed mine.
Sent from my ADR6425LVW using XDA Premium.
The other issue I've seen is poor contact in the USB socket on the wall adapter. I had to unplug the usb cable from the wall adapter. Then, look at the usb socket on the power adapter. The gold pins are the usb contacts. Directly opposite of them, there should be two silver prongs. I had to use a small flat blade screwdriver to pry both of them out a little further to ensure they did their job of firmly pushing the usb cable against the socket's usb contacts. Once I did, my TF201 was able to get charge from it, again.
If you decide to replace the wall charger, I believe Fry's and Office Depot stock the asus charger.
Same thing for me.. PC recognizes it as a media device, but will not charge with wall charger. Wall charger works with my HTC Phone, so it works.
I don't think it has anything to do with the latest update, since the Dock wont charge either, and there's no OS in that, right?
Just experienced this today. I have had it unplugged for about 10 hours now, we'll see if it charges.
I had the same issue few days after I got my prime. I connected my sgs to the charger and it worked. Then connected the prime and voila-works.
askmattrix said:
C series serial number prime worked for three days now won't take a charge. Device will connect to pc or mac via cable, just won't take a charge. Any ideas for me?
Click to expand...
Click to collapse
Which C model do you have? C1,2,3? Just asking.
Johnny0906 said:
Which C model do you have? C1,2,3? Just asking.
Click to expand...
Click to collapse
C1. There are some good suggestions here I need to try.
Wrap it in a towel and bang it against a table. That will fix it usually. Then get some pc heatsinks and some arctic silver adhesive and you can attach them to the charger to keep it from happening again.
The plug has two options, 5V (standard for USB?) and 15V. I used the plug on my old HTC phone (Ozone) and then plugged it back into my Prime and it worked. Thanks for the great tips guys.
Since the charger works in two modes, I wonder if some charges became confused and started dishing out 5V when they should be dishing out 15V. Thoughts?
G37 said:
The plug has two options, 5V (standard for USB?) and 15V. I used the plug on my old HTC phone (Ozone) and then plugged it back into my Prime and it worked. Thanks for the great tips guys.
Since the charger works in two modes, I wonder if some charges became confused and started dishing out 5V when they should be dishing out 15V. Thoughts?
Click to expand...
Click to collapse
Hi, I got the same problem. The charger indeed seems to be stuck in the 5V mode, since, when plugged in the tablet does get charged, even though it is not indicated, but very slowly. It is charging as if it is plugged in to a pc.
I tried plugging it into (old) phones, but I still can't seem to get it to switch back to the 15V mode.
The freezer didn't help either.
Any other suggestions?
I waited about 4-5 hours before plugging into my old phone. My other suggestion is to allow the phone to charge for a short bit (30 minutes) unplug and wait, then plug into your Prime.
I have a feeling that its a transistor toggle that isn't flipping at the correct voltage.
I've had the same problem yesterday. In my case the problem was with the charge socket on the keyboard itself. Some copper pins were deformed and that stopped the device charging. I took a magnifying glass(also for checking if any of the copper pins are bend) and a small tool to bend them back. After this it charged again. Hope this helps.
My charger suddenly stopped working from today. The Prime is detecting the connection as the screen turns ON but it is not charging. I charged my sensation using the same adapter and USB cable and it is working fine. Why can I not charge Prime via PC like phone? Is it possible? I am in India and not sure if the power adapter is easily available as Prime is not yet launched in India.
Kindly suggest.
Thanks in advance.
Hi,
I've started to have this problem today, plug it in and it does come up with the charge icon but it doesn't charge - or doesn't seem to.
However I left it connected last night from midnight until 8am this morning and it went from 13% to 17% so it is charging VERY VERY slowly although the unit doesn't actual seem to think it is.
I have it plugged in to my phone right now and its working perfectly, I borrowed the charger to my g/f last night to charge her iphone and i'm thinking this might have done something to flip the voltage as since then it isn't working.
Anyone have any ideas on this??
Kevin
thornd7 said:
The other issue I've seen is poor contact in the USB socket on the wall adapter. I had to unplug the usb cable from the wall adapter. Then, look at the usb socket on the power adapter. The gold pins are the usb contacts. Directly opposite of them, there should be two silver prongs. I had to use a small flat blade screwdriver to pry both of them out a little further to ensure they did their job of firmly pushing the usb cable against the socket's usb contacts. Once I did, my TF201 was able to get charge from it, again.
If you decide to replace the wall charger, I believe Fry's and Office Depot stock the asus charger.
Click to expand...
Click to collapse
I had this problem a couple of weeks ago and completed the same as above works well
Gilbo12 said:
I had this problem a couple of weeks ago and completed the same as above works well
Click to expand...
Click to collapse
But if the charger works fine when charging a phone it cant be the connection at fault..
It does seem to me that the power it is outputting has dropped especially the I managed to gain 5% over the course of a night where WIFI was off and screen was off even though the charge icon doesn't come up.
Is there a way of forcing the charger back in to 12v mode??
damnit... I had the same problems a few days ago and I thought it was in the cable instead of the charger... not realising the charger has to put out 15v instead of 5v.
Does this mean the Transformer won't charge with for example, my HTC charger?
I totally messed up my cable, because I thought it was broken... when I opened up the USB plug, I noticed the yellow wire was not connected anymore, but this didn't solve anything. Eventually I messed up the cable that bad, that I've ordered a new one from ebay... but when I read this... I should have just banged the charger a few times... shait.
funfair said:
damnit... I had the same problems a few days ago and I thought it was in the cable instead of the charger... not realising the charger has to put out 15v instead of 5v.
Does this mean the Transformer won't charge with for example, my HTC charger?
I totally messed up my cable, because I thought it was broken... when I opened up the USB plug, I noticed the yellow wire was not connected anymore, but this didn't solve anything. Eventually I messed up the cable that bad, that I've ordered a new one from ebay... but when I read this... I should have just banged the charger a few times... shait.
Click to expand...
Click to collapse
Has anyone actually ever managed to fix this problem? I've just contacted ASUS about it to see what they say - hopefully they'll ship me out a new charger plug or something, what a useless charger!!
None of my micro USB cables will charge my E970 without a "slow charging" notification except for the cable that came with the phone. Even the venerable 6' monoprice cable isn't up to the task. HTC cords aren't cutting it, either. Does anybody have any 6'+ (ideally a 10') micro B cables that will charge the phone without slow charging? My monoprice 6' cables (i have a bunch) barely keep the phone from losing charge when serving up LTE hotspot, where as the LG cable charges it whilst doing whatever I can to suck down as much current as possible.
Also, I really don't want to short data cables. Somehow the stock LG cable does full current while maintaining data capability, and that's what I'm looking for.
DeathmonkeyGTX said:
None of my micro USB cables will charge my E970 without a "slow charging" notification except for the cable that came with the phone. Even the venerable 6' monoprice cable isn't up to the task. HTC cords aren't cutting it, either. Does anybody have any 6'+ (ideally a 10') micro B cables that will charge the phone without slow charging? My monoprice 6' cables (i have a bunch) barely keep the phone from losing charge when serving up LTE hotspot, where as the LG cable charges it whilst doing whatever I can to suck down as much current as possible.
Also, I really don't want to short data cables. Somehow the stock LG cable does full current while maintaining data capability, and that's what I'm looking for.
Click to expand...
Click to collapse
OEM LG cables can be found almost anywhere used so that shouldn't be a problem. Otherwise, you may be looking at the wrong end of the cable. I have a spare tablet plug charger that puts out up to 2 amps and that seems to be what works best for me no matter what the cable. You might want to look for one of those instead of just buying more cables.
FWIW....I had the opposite result. The cable and adapter which has been near my bedside for the last year (for my HTC EVO 4G) kept giving me the slow charging notification on my me LGOG. If I used the LG adapter and cable all was well, but it was shorter than I wanted. I changed out the adapter and kept the older long cable and still got the slow charging notification. It seems most of my existing cables have this issue...even when using the new LG adapter.
I have not looked into power capacities on the usb cables since I charge each night and don't need to recharge during the day. Didn't expect there to be a throughput difference, but the new LG cable does seem to be different.
Sent from my LG-E970
What is the part number for the oem charger and USB cable?
I use a Samsung charging cable with my LG plug and it charges regularly. I love the Samsung cable because the mirco-usb plug is asymmetric so I always plug it in correctly the first time, every time. Even in the dark. The cable is pretty long too. I don't use the Samsung plug because it only outputs 0.7A though.
http://www.amazon.com/gp/product/B0049IE70I/ref=wms_ohs_product
I also use a cheapo USB male to female extender that I got off eBay at my gf's place and it charges just fine too.
I'm having the opposite problem, I have had my phone for a month, out of no where the original charger is throwing up slow charging icon. Wierd
Sent from my LG-E970 using xda app-developers app
ripbabey said:
I'm having the opposite problem, I have had my phone for a month, out of no where the original charger is throwing up slow charging icon. Wierd
Sent from my LG-E970 using xda app-developers app[/QU
Same problem here, just started about a week ago. It doesn't matter what cable I use it keeps switching between slow charge and regular charge.It charges without problems when the phone is off though. Also when I plug my phone into my pc it keeps disconnecting every few minutes. I'm starting to think its a problem with the phone itself and not the charger or cord as they work fine with all my other devices just not the Optimus G
Click to expand...
Click to collapse
I use all sorts of cables and so far the only time I see "Slow charging" is when it's plugged into my laptop or one of my USB hub. Those are the only times I could narrow mine down to.
In the car I use cheapo monoprice cable and charger, in the bedroom it's using the charger and cable from my HTC inspire. By my PC I have a Belkin 6 plug 2 usb wall charger installed with the stock cable, and at the office an iPhone 1G wall plug. I don't think I have even plugged in the oem charger that came with it.
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Slow Charge Message
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Same here. Glad to hear it is not just me. I just got off with NA HTC Tech Support. There official stance is that they do not recommend or support using any device other than the official charging cable and plug in device. They went as far to say that they do not support charging in the car. I just about flipped my lid on the phone.
Here is the link to their site: http://www.htc.com/us/support/howto...783&p_name=droid-dna-by-htc-(verizon-wireless)
"Only the power adapter and USB cable provided in the box must be used to charge the battery"
I was told by Verizon that this was just a scare tactic, while HTC says I am not getting the right charge and they have no answer since they do not support DC charging in the car. Any info people have is appreciated. It works fine with Hard Wired DC -MicroUSB, but not with any USB Plug in.
Any apps that would help me measure the amount of charge it is getting?
Thanks in advance.
What are the specs on your car charger?
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
So odd that they would do that, especially with the power draw of the phone. However you can charge using the battery packs?
My car adapter is a Macally USB car adapter model carusb10 output 5v/2.1 amp x1 500mA x2.
As for my house adapters the RCA 2 port USB wall adapter. 2.1 Amp x 1 or 1000mA x 2 I believe.
Sent from my HTC6435LVW using Tapatalk 2
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
xcesivemastub8ah said:
Everyone with a stock DNA unplug your charger and flip it around. As in flip the prongs. It should give you this message even with the HTC supplied one. Or try this. When you use another charger and it gives you that message unplug it and flip it. It should straighten out. I dunno. Something about the way the power is drawn.
Click to expand...
Click to collapse
I have tried several different USB adaptors, from Razorfish(BestBuy), Belkin single USB input 2.1amp, innocell (RadioShack) dual SUB 3.1amp. Same problem on all.
On the other hand, any direct Wall connection with USB cable attached seems to work fine.
Also, I have the Motorola p4000 battery backup and when I plug that in, it also works fine and views it as AC.
Swapping the pins didn't work for me, same issue. Its a pita for me especially charging in the car because when using phone for navigation it charges so slow that it can't actually charge my phone and my battery decreases. I've went the route in the car I use my nexus 7 charger connected to an inverter.
Sent from my HTC6435LVW using Tapatalk 2
From my phone conversation with Seth from HTC Support, the slow charging warning is due to the update because the update incorporates the faster charging feature that qualcomm & htc have referenced too recently (can't remember what its actually called). The phone has a new type of charging setup that makes it charge faster than some other phones.
Unfortunately some chargers (wall/car) dont supply enough voltage to activate the charging feature so while the phone does charge fine (it charges at standard phone charge rate) it cannot charge at the faster rate due to the charger.
He states that this will not harm the phone and ther phone will charge fine and it a normal time. You can disregard the warning. For those that like the faster charge rate, you have to use the right charger/cable.
Before the update our phones were mostly charging at the slower rate and that's why most didn't see a warning unless the cable being used was below the standard rate of charge.
Hope this helps
arisch86 said:
Seems ever since I updated to the latest OTA update, if I plug my phone in on certain chargers I get a notification stating slow charging enabled please connect to your factory charger. Anyone else having this issue?
It seems to do it on any charger or 12volt car to USB adapter capable of outputting 2 to 2.1 amps
Stock ROM, rooted, unlocked, s-off
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Why are there so many problems about this thing lately even me, I experience this most of the time
When I use the Best Buy 2.1 amp wall charger I still get the message.
I'll need to find my oem wall charger.
So far every one I have gives this message.
I haven't seen this message at all on any of my charges but I haven't charged in the car yet. My battery usually lasts for more than the while day so I just charge at night.
Sent from my HTC6435LVW using xda app-developers app
Well with the faster charging enabled it does charge pretty quick especially using my nexus 7 wall adapter, even with my Nokia Qi pad. But man that last percent takes a while.
As of now I'm using supercharged hatka ROM slim 3.0.3 and getting good battery life. Even in the middle of nowhere where 75% percent of the time when I'm in the plant its searching for signal. I'll leave work after 8 hours and still be at 60%
Guess you can say its the only negative I have for the phone. Trust me the battery life is much better in the plant then my old bionic. I use to have to change the standard battery after 4 or 5 hours as it was completely dead.
Sent from my HTC6435LVW using Tapatalk 2
Last night I received my daughters replacement Rezound from the warranty company. It came with a 1 amp wall charger.
I plugged it into my DNA and did not get the notice of slower charging and it charged quicker than I've ever seen it.
Too bad my 2.1 best buy one won't.
The quick charge capable chargers must output just slightly higher voltage to trigger the rapid charge mode.
I'll experiment some day and see.
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I have the charger that came with the phone it it fully charges my DNA in 2 hours from 3%
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
I kinda figured it was something with the pins if I wasn't voltage offset.
I did find that one of my car chargers from best buy runs in quick charge. The cable I fixed, rather than using a usb cable in a slot on the charger.
The best number 2.1 amp wall charger uses a data type cable.
Maybe I'll check into shorting the pins on that sucker to get quick charge mode.
Funkertosh said:
This is a known issue. It all comes down to there being no set standard for USB charging. Android, apple, tablets, they all just seem to do their own thing.
The phone is checking the pins on the charger. If the data pins are shorted, then you get fast charging. If not, then it will default to the slower USB charging.
That last update that came through added that 'Slow Charge' warning. I saw it on my gf's DNA. My DNA is rooted and ROM'd so I don't have that. You can still check for the charging speed on a device by going to the Battery page in the settings. Up on top it with either say AC (which is fast) or USB (which is slow).
The supplied HTC wall chargers have the data pins shorted within them, so any regular USB cable will allow you to charge at the AC rate. You may remember some years ago there used to be Charging Only cables and they were regular USB cables that simply had the data pins shorted.
Most car chargers do not have data pins shorted. I have used a number of different ones from monoprice and none of them will charge at the AC rate.
There are videos on youtube showing how to open them up and solder the data pins. You can look for charging cables on amazon (but that seems lame), or you can find a car charger that just actually works.
There is a cheap Motorola charger on Amazon that will give you the fast AC charge.
https://www.amazon.com/dp/B000S5Q9CA/ref=as_li_ss_til?tag=funkertosh-20&camp=0&creative=0&linkCode=as4&creativeASIN=B000S5Q9CA&adid=131FS8N5R70JPV4QGDCV&
Click to expand...
Click to collapse
The phone is doing more than checking pins now. I have a 2.1 Amp dual charger with pins shorted and get the warning. It happily charged in AC mode before the update. The charger can also charge a nexus 10 at 2 Amps. I'm guessing the kernel devs will have to locate the source of the warning. I thought the resistance between the data pins might be the trigger, but there is no difference between the HTC charger and my dual charger. It does seem my car charger is unaffected.
I have found that to trick the phone into AC mode you have to short the the actual cable. Hence strip the insulation off the wires and short the data wires together. Has worked for me on all my chargers.
Sent from my HTC6435LVW using Tapatalk 2
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Clay333 said:
This message does not have to do with the update. I have still not updated my DNA and have been struggling with this for about 6 or 8 months. I am on 2.08. The issue has continually gotten worse since the first time I saw it. At first it would just appear about 1 in 10 times I plugged it in to a car charger. It then got to the point where it would only not show the message with a certain car charger. Now it is showing it on the one car charger that works, but if I mess around with it and unplug and replug it a few times it will finally charge normally. The last few days it has started showing the message on the OEM charger. I have cleaned out the port on the phone and cables quite a few times now, but it doesn't help. I found that doing that only helps if it gets really full of lint and the cable rocks in the port causing it to loose connection if you move it, but it does not change the slow charging message at all. The phone is also definitely not charging at full speed when that message is shown. If I have it plugged in and it shows that message my battery actually drains if the screen is on. With the screen off I only gain about 10% per hour. I am not sure where the issue is, but I think it is different in different circumstances. In my case I think it is the phone itself, but from what I have read about others experiences it seems their problem might be the charger/cord. I hope this gets sorted out soon.
Click to expand...
Click to collapse
It could be the charging equipment your phone or it could also be the power source not providing enough power to the device for it to charge fast so it charges slow.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
maydayind said:
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
Click to expand...
Click to collapse
Cool, thanks man, I'm gonna do that.
Why blow data when you can just get a cheap 4$ cable from newegg with 22 awg power leads. I linked it in confirmed usb cable thread. You destroyed a cable and made it special, hence using a special one instead of standard. The base is pre shorted. You increased AWG technically. Get it? You made a charge only cable, when these are special and can be had cheap anywhere. Buy a nice 4$ standard one with the right power lead awg and you can use it for anything.
...or.. Crazy idea here. Get an Android charger?
Cutting up USB cables is a bad idea, especially shorting them out. The data pins are not supposed to be shorted, generally 200Ohms is expected.
They are suppose to be shorted with fast charge... the base normally does this on plug in on AC switch. A USB3 port also does this... all he did was make a charge only cable. With fast charge 2 though, you won't make it much past 1A this way, just like USB3. Why our stock cable has thick power lead AWG and the phone can reach 1.8A.
Steamer86 said:
They are suppose to be shorted with fast charge... the base normally does this on plug in on AC switch. A USB3 port also does this... all he did was make a charge only cable. With fast charge 2 though, you won't make it much past 1A this way, just like USB3. Why our stock cable has thick power lead AWG and the phone can reach 1.8A.
Click to expand...
Click to collapse
As I said, 200ohm, not shorted... Anyway.
unless the plugg that u connect the USB cable in i sent chortcircut it won't fast charge whatever cable u use. this is for making a charge cable to use with carcharger ore power packs. of u use a wallcharger it's 99% certain it is already chotend and u don't need this. but if u use the original cable (fastcharge) it won't fast charge in a power pack or car charger.
and I charge att same speed with this cable then original charger cable that came with the phone. measured 1.8a with this cable that's all my Powerpack can output. can probably go higher depending on how mutch the phone can use.
it's li-po so should be able to charge 0-100% in 20min but whill shorten battery life and don't think oer phones can handle it
I fast charge with 3 different cables. Again, it's the AWG. Facts don't lie. My power pack and car charger are pre shorted, so all good. If not pre shorted though, you are correct sir.
my wasn't that's why I made this. so no matter what cable used it won't fast charge. Som people also say u have to by a expensive cable with is bull####
if someone can provide a link with a preshortens cable... well then show it. unable to find any
It is legit. I did this with a car USB cable when I had my One X. It would only charge at USB rate (500ma) even though it was a 1A charger. Using navigation the battery would discharge faster than it charged. Tried various cables, and only got it to work by shorting the data pair. After that it charged AC at full 1A.
maydayind said:
my wasn't that's why I made this. so no matter what cable used it won't fast charge. Som people also say u have to by a expensive cable with is bull####
if someone can provide a link with a preshortens cable... well then show it. unable to find any
Click to expand...
Click to collapse
Several available on Amazon:
http://www.amazon.com/s/?ie=UTF8&keywords=usb+charging+only+cable
Not always. My car cigarette adapter is modded to short data pins. It fast charges all my other devices and even my tablets, but doesn't even charge my G2. It says its charging, no slow charging messages, but still depletes battery. Only way toncharge in my car is to use the second USB port that is unmodded, which slow charges. Annoying.
I still think there is a software bug limiting the charging speeds because you can get different speeds by plugging in the same cable mulitple times.
-sent from my LG G2 using XDA Premium 4
We aren't saying you are wrong, you are just doing something different. It's not about expensive, its about thickness for the combo usb cable. Just the awg. What your solution does is increase awg. They are called charge only cables (pre-post short). What people were searching for are COMBO cables. You are using/doing something different. Why titles are called "working USB" cables, not charge only. We already knew this. There is bugs. That was apparent in the voltage testing. Something in the kernel isn't playing right at all times. I have seen this on my car charger. With no change in conditions, I can sometimes charge 200mA's higher with a replug.
player911 said:
Not always. My car cigarette adapter is modded to short data pins. It fast charges all my other devices and even my tablets, but doesn't even charge my G2. It says its charging, no slow charging messages, but still depletes battery. Only way toncharge in my car is to use the second USB port that is unmodded, which slow charges. Annoying.
I still think there is a software bug limiting the charging speeds because you can get different speeds by plugging in the same cable mulitple times.
Click to expand...
Click to collapse
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
jonstrong said:
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
Click to expand...
Click to collapse
The 3SIXT micro USB charger I have is rated to 1A not modded, just bog standard. When charging I checked the battery stats and it says AC charging. Now I don't know if it has the data pins pre-shorted, but it managed to boost my battery by 10% in under 20 minutes. The phone was idle, but that's not bad going for a 1A $10 charger.
seems like the moderators did a god job deleting som posts.
just want to say I'm a sorry for my bad manur/attitude/language.
keep the input comming
here is another thread about the topic on another device
* *http://forum.xda-developers.com/showthread.php?t=2292373
maydayind said:
so got tired of not finding a fast charge mod so I mod the cable.
took a realy thin cheap USB cable and cut it in two. on the phone side chortsircut the data cables (white and grean) then connected the vcc+ and ground- normal.
the only reason I cut it in two was to be able to tread a shrink tube on the cable.
now I get fast charge from car and power pack and. and it works perfect.
now stop saying u need a special or expensive cable.
u need a knife and shrink tube and a heat gun (a cigaret lighter works)
and no u can't use this cable for datacynk only charge
Click to expand...
Click to collapse
Cool, thanks man
jonstrong said:
The included home charger for the G2 is rated at 1.8A -- use anything smaller, and you'll see the pop up warning on the phone that charging will be slow and that you should use the "official" charger.
My guess -- if you can find a car charger that actually will put out as much as the phone wants to draw (e.g., 1.8A), and THEN use your shorted data lines, you'll see fast charging of the G2 in your car.
Click to expand...
Click to collapse
not true have tried 3 other chargers 1.2 1.0 and 0.8 all say fastcharge (ac) with my modes cable. as long as it's over 500ma and with a cable with data pins shortend the slow charge warning is removed an the phone thinks it's charging from ac
charging my phone now with a Powerpack with 1a output and it says fastcharge (ac)
if I use the original cable it goes to slowcharging 500ma iv meshurd befor I put on the shrinking tube for isolation
and a car charger can output in theory 5-20a depending on your fuse in the car
the charging current is controlled by kernels in so phone. my old sensation u culd mod with a fastcharge Kernel so it never limited to 500ma always use max.
Samsung even has the ability to do a full charge in 30min but disabled in Kernel.
lg - g2 uses lipo battery's and culd actually be charged in less then 20min but if we do that u have to replace the battery every 6month at the best.
and lipo are extremely sensitive to over charge and the cells have to be charged with precision balans not to explode or swell.
I always thought that charging this tables takes forever.
Then, a few days ago I used an USB multimeter and found that using the original 1.5A Sony adapter and the original cablet, the tablet is charged just at 1.0A rate.
Then I tried with a thicker quality USB cable and the charge rate increased to 1.5A (+50%!), using all the power the adapter can give. The charge rate slowed down to 1.0A while approaching full charge but overall the charge process is much faster.
I did the test with the tablet powered on. Tried with or without the magnetic charging stand and I got the same results.
The original cable it's not damaged so I suppose the slow charging speed is intentional.
Anyway, I think I will continue to use the thicker cable so my charging times will be shorter, I suppose it's safe to charge this tablet at the full charging speed the original adapter can give, what do you think?
I never used the original cable that came with mine, I had a 6' Anker cable to spare so I used it instead and I thought it charged pretty fast, much faster then when I use the magnetic dock.
But I'm lazy, so it goes on the magnetic dock 99% of the time because it gets a full charge sitting on it anyways.
And there are kids.
Can't afford to lose the water tight bit.
This thing has found its way into the tub.
Darn good tablet.
BTW
Pretty sure its safe, its CPU is a Qualcomm that supports quick charge.
tobalaz said:
I never used the original cable that came with mine, I had a 6' Anker cable to spare so I used it instead and I thought it charged pretty fast, much faster then when I use the magnetic dock.
Click to expand...
Click to collapse
Do you use the same Anker cable with the magnetic dock? According to my findings, the magnetic dock should not slow down the charging process.
I don't have a USB multimeter, but I have used differnet USB cables to charge and found big difference in the charging time.
I have 2 original Sony chargers at home, one in the bedroom and the other in the Living room. Battery Monitor Widget showed that it could charge from 0 to 100% in 5.5 hours (at 1298mA, and 18.09% per hour) with a thick no-name brand USB magnetic cable in the bedroom, and down to only 406mA with the original Sony USB cable in my Living room.
The conclusion is: get a good thick USB charging cable.
ciarpame said:
Do you use the same Anker cable with the magnetic dock? According to my findings, the magnetic dock should not slow down the charging process.
Click to expand...
Click to collapse
Yes. I use the same cable.
Dock charging seems (or should I say seemed?) to work a little slower if I'm waiting on the tablet. Its not incredibly slow and I can stream Showbox (w/ Growbox and Allcast) or Netflix from the tablet and it still charge faster then use its juice, so its not a worry for me.
I've never had a battery problem with it either, it'll go all day as a reader or watching media and still have at least 30% left at the end of the day, so it goes back on the magnetic charger overnight. No reason to directly plug it in anymore.
as long as it is a working usb cable, there is no harm that a cable cause to a tablet.
tobalaz said:
I never used the original cable that came with mine, I had a 6' Anker cable to spare so I used it instead and I thought it charged pretty fast, much faster then when I use the magnetic dock.
But I'm lazy, so it goes on the magnetic dock 99% of the time because it gets a full charge sitting on it anyways.
And there are kids.
Can't afford to lose the water tight bit.
This thing has found its way into the tub.
Darn good tablet.
BTW
Pretty sure its safe, its CPU is a Qualcomm that supports quick charge.
Click to expand...
Click to collapse
Laughed aloud at the past about kids!
I bought a cheap 6ft USB charging cable and thought there was something wrong with my tablet because it took forever to charge. No multimeter, it damned on me that the cable was acting as a resistor probably because the wires are thin (cheapo).
Conversely, when I bought a refurbed z3V to have as a back up, it came with a generic charger that was rated only 1 amp (the phone charger from Sony is 1.5).
I think that as long as it doesn't go to much past the rated 1.5, it's good.
AddictedToGlass said:
Laughed aloud at the past about kids!
I bought a cheap 6ft USB charging cable and thought there was something wrong with my tablet because it took forever to charge. No multimeter, it damned on me that the cable was acting as a resistor probably because the wires are thin (cheapo).
Conversely, when I bought a refurbed z3V to have as a back up, it came with a generic charger that was rated only 1 amp (the phone charger from Sony is 1.5).
I think that as long as it doesn't go to much past the rated 1.5, it's good.
Click to expand...
Click to collapse
I stick to Anker. They're good products, have a decent price and if you're ever in need of customer service they're awesome.
I emailed them over a discontinued mouse that was out of warranty (software issue) and they called me the next day and made sure it was working right. This past December they sent me one of their portable phone chargers as a loyalty reward. I've got mice, keyboards, chargers, wires, phone and laptop batteries from them and they've all been fantastic. They make it hard to want to buy from anyone else if they've got it.