Safe way to revert to Gingerbread Stock - HTC Amaze 4G

Hi guys,
I have rooted, S-OFF, 4EXT recovery, SuperCID, running Stock T-Mobile ICS HTC Amaze. My current configuration is
SHIP S-OFF
HBOOT 1.93.2222
Radio_1.14.550L.17DC_30.78.550L.15
I have searched "Amaze how to revert to stock" from within the forum and google as well but the answers came up so confuse and not very clear. So I dare to oen a new thread here asking for help. Somebody else might looking for the same thing.
Basically I want to go back to T-Mobile Stock Gingerbread. I have:
Hasson AllinOne V3.1,
PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_228638_signed
How would I safely going back to stock?
I know I have to flash the PH85IMG_Ruby_TMOUS_1.43.531.3 via fastboot as the last step but what step should I take first? Flash the stock bootloader first or flash the stock recovery first?
Any advice would be appriciated

Im S-on so idk if its different.
download this: http://www.filefactory.com/file/c0d...19DC_30.66.550L.08D_release_228638_signed.zip
idk if its the same one you have but just download it just in case, and RENAME IT to PH85IMG.
AFter that put it in your sd and boot into bootloader and then fastboot so it reads that file. then just click yes to the update and you are set.

^^ will that "update" revert EVERYthing back to s-on, shipped bootloader and recovery?

Will it revert the radio as well?

You might need to run the Mainver Error Fix in the all-in-one toolkit. It "spoofs your software version so you can downgrade your ROM."
Hasoon can correct me on this if I'm wrong.

kered424 said:
You might need to run the Mainver Error Fix in the all-in-one toolkit. It "spoofs your software version so you can downgrade your ROM."
Hasoon can correct me on this if I'm wrong.
Click to expand...
Click to collapse
Thanks. I tried this, running the mainver error fix, but it fails, saying device not found. I ran this with the phone connected to the computer via usb, and the phone in fastboot.

aiwapro said:
Thanks. I tried this, running the mainver error fix, but it fails, saying device not found. I ran this with the phone connected to the computer via usb, and the phone in fastboot.
Click to expand...
Click to collapse
Someone PLEASE reply to this gentlemen. This is the exact same problem I'm having at the moment, and have been for a week. I've looked high and low, and was on the verge of creating a new thread.

Just flash the stock file you have via hboot by renaming it to PH85IMG and placing it on your sdcard.

Dark Nightmare said:
Just flash the stock file you have via hboot by renaming it to PH85IMG and placing it on your sdcard.
Click to expand...
Click to collapse
This is the same process I've been following. When I flash the stock file, I get the Mainver Error. When I try using Hasoon's Mainver Error Fix, command prompt tells me the device isnt found. I get no further than this.

Sylvaeria said:
This is the same process I've been following. When I flash the stock file, I get the Mainver Error. When I try using Hasoon's Mainver Error Fix, command prompt tells me the device isnt found. I get no further than this.
Click to expand...
Click to collapse
Is the device in fastboot mode?
Are you s-on or s-off?
Also are you on GB or ICS?

Dark Nightmare said:
Is the device in fastboot mode?
Are you s-on or s-off?
Also are you on GB or ICS?
Click to expand...
Click to collapse
Fastboot.
This was my first root, and I've done nothing to mess around with anything related to security, so I'm gonna say S-On.
And I'm currently on ICS.

Sylvaeria said:
Fastboot.
This was my first root, and I've done nothing to mess around with anything related to security, so I'm gonna say S-On.
And I'm currently on ICS.
Click to expand...
Click to collapse
If you're on ICS, you cannot revert to GB, so your best option would be to flash a custom recovery, 4EXT recommended and look in the dev section for Hasoon2000's thread of stock zip files, download the carrier file that's for your device and flash that via a custom recovery, since T-Mobile is the only carrier we have bootloader flashable ruu files.

Dark Nightmare said:
If you're on ICS, you cannot revert to GB, so your best option would be to flash a custom recovery, 4EXT recommended and look in the dev section for Hasoon2000's thread of stock zip files, download the carrier file that's for your device and flash that via a custom recovery, since T-Mobile is the only carrier we have bootloader flashable ruu files.
Click to expand...
Click to collapse
I actually meant I was flashing to stock ICS. I just posted here for sake of simplicity. I have all of this ready to go already. Recovery and stock .zip. The only problem left is that the Mainver Fix in Hasoon's AIOT doesn't detect my device. I heard the fix for this is enabling USB Debugging, but I cannot do that since I get a permanent whitescreen after I boot up my device, and I've unlocked/relocked my bootloader and it reset the USB Debugging option. I feel like I'm pretty screwed at this point. Definitely not giving up, though.

Sylvaeria said:
I actually meant I was flashing to stock ICS. I just posted here for sake of simplicity. I have all of this ready to go already. Recovery and stock .zip. The only problem left is that the Mainver Fix in Hasoon's AIOT doesn't detect my device. I heard the fix for this is enabling USB Debugging, but I cannot do that since I get a permanent whitescreen after I boot up my device, and I've unlocked/relocked my bootloader and it reset the USB Debugging option. I feel like I'm pretty screwed at this point. Definitely not giving up, though.
Click to expand...
Click to collapse
What is your device's bootloader version and what carrier are you on?
You're going around in circles and that's not exactly gonna solve the problem atm.

Dark Nightmare said:
What is your device's bootloader version and what carrier are you on?
You're going around in circles and that's not exactly gonna solve the problem atm.
Click to expand...
Click to collapse
No kidding. T-Mobile. Not sure how to check version, so this is what I see:
RUBY PVT SHIP S-ON (Welp, I guess I got it right) RL
HBOOT-1 1.93.0002 (Assuming this is it?)
Open ADSP-v02.6.0.2226.00.0202
eMMC-boot
Mar 15 2012, 21:46:51

Sylvaeria said:
No kidding. T-Mobile. Not sure how to check version, so this is what I see:
RUBY PVT SHIP S-ON (Welp, I guess I got it right) RL
HBOOT-1 1.93.0002 (Assuming this is it?)
Open ADSP-v02.6.0.2226.00.0202
eMMC-boot
Mar 15 2012, 21:46:51
Click to expand...
Click to collapse
Download this file: http://d-h.st/3VD
Relock your devices bootloader, put the device into fastboot, get hasoon's tool ver 3.2, or whatever the latest atm is, relock/lock the bootloader command.
rename that file PH85IMG exactly like that, put it on your sdcard, not your phone memory, do not extract it or place it into any folders, reboot into bootloader, volume up to update.
Let it boot completely at least once before attempting to root/flashing a custom rom.

Going for it. Thanks for the help so far. I'll report back soon.

Okie dokie artichokie.

Dark Nightmare said:
Download this file: http://d-h.st/3VD
Relock your devices bootloader, put the device into fastboot, get hasoon's tool ver 3.2, or whatever the latest atm is, relock/lock the bootloader command.
rename that file PH85IMG exactly like that, put it on your sdcard, not your phone memory, do not extract it or place it into any folders, reboot into bootloader, volume up to update.
Let it boot completely at least once before attempting to root/flashing a custom rom.
Click to expand...
Click to collapse
You, sir, are a god among men. Thank you SO much. Is there any way I can thank you twice?

Sylvaeria said:
You, sir, are a god among men. Thank you SO much. Is there any way I can thank you twice?
Click to expand...
Click to collapse
Lol, you're welcome, happy you got it resolved, have fun.

Related

HTC rezound I need HELP!!

First of all excuse me for my bad english, second i really need your help very much an i will be very thankful if you could help me.
I am living in Georgia, tbilisi.
i wanted to sell my rezound but the guy who wanted to buy it asked me to Put ICS and after he woould buy it. i accepted this suggestion, i unlocked bootloader, put CMW touch recovery and Backup my stock ROM, after flashed cleanrom, but i really did not like it, after i wanted to return it gingerbread, as i was new and i was coming from SII and i just make Restore(as i was doing on SAMSUNG), of course it didn't turn on and stuck on bootloader, after i flashed stock rom but nothing happend, it is stucking on HTC white logo and nothing more. could someone just give me a hand. PLEASE!!
this is wrighten on my boot
***unlocked***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
RADIO-0.95.00.118r/0.95.00.1223r
openDSP-v10.6.0.7611.00.0919
eMMC-boot
oct 6 2011, 15:43:22
Sounds like you need to flash the ph "patch" file to use ics Rom. Your still on a gb ruu.
I would suggest reading up on how to s-off
Then upgrade to the latest RUU. there are tons of post in the first link of this forum
Sent from my ADR6425LVW using xda premium
Wrong section, please post threads like this in the Rezound Q&A section.
You need to flash the GB kernel either as a PH98IMG.zip in the bootloader or flash the boot.img with fastboot. Because your phone is s-on, recovery can't restore the kernel on it's own. Once you have it fixed, I would also recommend you use Amon Ra for recovery, not CWM.
Wrong section, but it appears that you may need to fast boot the boot.img for the gb rom you are trying to run, if you have not tried this already.
What mjones said lol... beat me to it
as i remember i tried to flash stock 2.3 ROM with it came PH98IMG.zip, but when i tried to flash it after rom it say older version or something like that.
i know that i am on wrong place and excuse me for that one more time but i am really in deep **** because i own money to person i need to fix it soon please guys can u provide me with right things, like give me a link how to s-off wothout turning on phone, and give me the right PH98IMG.zip and stock rom. Please guys i know that it is very hard but i am really in bad situation :
Flash this zip in recovery and then try to flash the PH98IMG from bootloader afterwards....The zip i posted should now allow you to do so.
I also suggest doing more research and reading up on things before attempting them on a device you are unfamiliar with.
Milly7 said:
Flash this zip in recovery and then try to flash the PH98IMG from bootloader afterwards....The zip i posted should now allow you to do so.
I also suggest doing more research and reading up on things before attempting them on a device you are unfamiliar with.
Click to expand...
Click to collapse
i will remember that, but i have one more question, after this i should flash stock 2.3 with it PH98IMG? problem is that i cannnot find stock 2.3 rom anymore.
janjala said:
i will remember that, but i have one more question, after this i should flash stock 2.3 with it PH98IMG? problem is that i cannnot find stock 2.3 rom anymore.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1365654 for the flashable ruu files.
thatsricci said:
http://forum.xda-developers.com/showthread.php?t=1365654 for the flashable ruu files.
Click to expand...
Click to collapse
now i am trying to update my phone with this 2.01.605.11 Gingerbread EXE RUU
from my pc but it finds some error.
now i will try from
PH98IMG.ZIP
i will tell what will happen.
what i find so quickly if i want to flash any rom i need to be s-off, only one way to make s-off as i saw i need some wires am i right? or is there any other way?
no other way, only one s-off method.
if i were you i would
1. Relock the bootloader.
a. boot into bootloader
b. go to fastboot
c. on pc navigate to your fastboot files in cmd line
d. type "fastboot oem lock"
2. Reset mainver
3. Run the latest leaked ics Ruu
4. Install amon ra 3.15
5. In amon ra go to developer section and install super user (regular not eng)
6. Unlock the bootloader
7. S-off the phone - http://unlimited.io
8. Flash amon ra 3.15 again
9. Reformat your sd card because it most likely got messed up from s-off
10. Install ivysaur 3.2
a. go into the pkmn tweaks and turn the boot animation sound off
b. make sure everything is fine and dandy and there you go
Look into each step further make sure you know what your doing.

Is this EVO 3D Bricked?

I was given a phone to try to resurrect from the dead. It powers on directly to the bootloader screen and does no more. I really know nothing about this phone model. Before I start, I want to know if it is even possible. The screen says the following:
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.57.0000
eMMC-boot
Apr 20 2012, 17:39:22
And then there are the normal bootloader options. Can this thing be saved?
silenthatred said:
I was given a phone to try to resurrect from the dead. It powers on directly to the bootloader screen and does no more. I really know nothing about this phone model. Before I start, I want to know if it is even possible. The screen says the following:
*** LOCKED ***
SHOOTER XC SHIP S-ON RL
HBOOT-1.57.0000
eMMC-boot
Apr 20 2012, 17:39:22
And then there are the normal bootloader options. Can this thing be saved?
Click to expand...
Click to collapse
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
wloftus said:
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
Click to expand...
Click to collapse
Thanks, it does show fastboot usb...find your token? Not sure what that means. I'll search around a bit when I get home. My original Evo 4G I did root, but don't remember that part.
silenthatred said:
Thanks, it does show fastboot usb...find your token? Not sure what that means. I'll search around a bit when I get home. My original Evo 4G I did root, but don't remember that part.
Click to expand...
Click to collapse
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Unknownforce said:
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Click to expand...
Click to collapse
RUU.EXE finds it and then gets to the restarting into bootloader step and the phone restarts. Then it just saying waiting for bootloader until it times out, but the bootloader is up on the phone.
silenthatred said:
RUU.EXE finds it and then gets to the restarting into bootloader step and the phone restarts. Then it just saying waiting for bootloader until it times out, but the bootloader is up on the phone.
Click to expand...
Click to collapse
This happens sometimes if you have a custom bootloader installed when you flash the RUU. Just cancel the Windows task and restart it and you should be fine.
ramjet73
wloftus said:
if you can get to the bootloader screen and access the fastboot selection,plug it into a computer and get it to read fastbootusb then its fixable,first find your token and unlock the bootloader, then from there install a custom recovery , next copy the stock ROM over to your sdcard and boot into recovery... select install zip from sdcard and guide yourself to where the file is located ,select it and let it install... from there it should be able to reboot and boot up into the ROM
Click to expand...
Click to collapse
Unknownforce said:
You don't need to unlock the bootloader to fix it, and you shouldn't unlock it anyways, until you have it fully booted properly.
Run the RUU EXE from a PC for the 3.28 update (or whatever the later version is) while the phone is connected via fastboot USB mode, it will re-flash the ROM and should boot properly then.
Click to expand...
Click to collapse
Couple things since I have looked into this a little more. Despite it saying Sprint on the front, it is a Virgin Mobile phone. It has the OTA that came down on it, so I can't flash the older RUU. It says it is an older version. So it looks like unlocking the bootloader is my only option? Question is, how do I do that from the bootloader? I was able to get the token and have the unlock_code.bin file, but the instructions to flash it seem to rely on having a working ROM to complete it, which I don't have. The phone is stuck in a bootloader loop. S-OFF, I have the answer. But it is S-ON, so not sure what to do.
silenthatred said:
Couple things since I have looked into this a little more. Despite it saying Sprint on the front, it is a Virgin Mobile phone. It has the OTA that came down on it, so I can't flash the older RUU. It says it is an older version. So it looks like unlocking the bootloader is my only option? Question is, how do I do that from the bootloader? I was able to get the token and have the unlock_code.bin file, but the instructions to flash it seem to rely on having a working ROM to complete it, which I don't have. The phone is stuck in a bootloader loop. S-OFF, I have the answer. But it is S-ON, so not sure what to do.
Click to expand...
Click to collapse
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
ramjet73 said:
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
Click to expand...
Click to collapse
It flashes unlock_code.bin to the phone successfully, but the next steps say to click yes on the screen to unlock on the phone. Can't access that without a working ROM. I'll try unknownforce's method when I get home, thanks for the help!
ramjet73 said:
You are right that the Virgin Mobile RUU can't be flashed when S-ON and the OTA has been installed unless you can flash a zip to downgrade your main version (mainver) and you have to be unlocked and rooted to do that.
Click to expand...
Click to collapse
Why is this? Is there not a full RUU for the latest version?
ramjet73 said:
The unlock_code.bin file is flashed via fastboot USB mode so it might work, but if you've tried that and it doesn't you may be able to use unknownforce's hboot downgrade method to get straight to S-OFF. I don't know of anyone that's done it on an Evo V 4G but it might work if you use the RUU zip file for that model.
ramjet73
Click to expand...
Click to collapse
You still have to brick the device for this and I haven't been able to brick it without using a full RUU flash, which he apparently can't do?
silenthatred said:
It flashes unlock_code.bin to the phone successfully, but the next steps say to click yes on the screen to unlock on the phone. Can't access that without a working ROM. I'll try unknownforce's method when I get home, thanks for the help!
Click to expand...
Click to collapse
Does it still say ** LOCKED ** Or does it say ** UNLOCKED ** now?
Unknownforce said:
Why is this? Is there not a full RUU for the latest version?
Click to expand...
Click to collapse
No. Virgin Mobile released an OTA update in November but there's no RUU that corresponds to it available yet. Fortunately, the bootloader version didn't change so the original RUU can be flashed with S-ON if the mainver is set low, but you need to be unlocked and rooted already to flash the zip file that does that.
You still have to brick the device for this and I haven't been able to brick it without using a full RUU flash, which he apparently can't do?
Click to expand...
Click to collapse
That would be a problem for him then. I don't know of anyway to flash the RUU with S-ON after the OTA has been installed if the bootloader is actually locked and he can't unlock it.
ramjet73
Yeah, not looking good. Thanks for the help though!

Urgent!! Please help to restore phone

Hi,
I have a Sprint CDMA HTC EVO 3D. I tried root and get S-OFF for it. Unfortunately I failed and now the phone fail to boot.
Below is what I did from which you might be able to diagnose it and give me suggestions.
(1) The original status of mu phone is:
Stock rom, I never root it before.
HBOOT-1.58.0000
Android Version: 4.03
HTC Sense version: 3.6
Software version: 2.95.651.6.710RD
(2) My root procedures:
I followed this post: http://forum.xda-developers.com/showthread.php?t=1813818
I successfully unlocked phone with HTCDev, successfully Flashed 4EXT recovery, and successfully installed Superuser-3.1.3-arm-signed.zip. I also booted into sytem, everything worked well.
However I failed in next step of JuopunutBear's Wire Trick (S-OFF). When I ran ControlBear.exe, it finally hanged there.
Current status of my phone:
Unfortunately I did not make a backup to my original ROM, so there is no way to revert back by restoring backup.
Now the phone is in unlocked status, I was able to boot to HBOOT and also enter 4Ext recovery, however I am not able to boot into Android. If I try to boot into Android, it always hang at black screen.
I am able to boot to fastboot (USB) mode, I tried to flash some stock ROM (listed at http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209), but I failed. For example, I ran a RUU of 2.89.exe, it detected my phone version is 2.95, and further update RUU failed.
Looks like my partition is ruined, but I might be wrong.
ANyone can help me to restore my phone to working status? At least I need the phone to be able to boo to Android.
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
lsdyna said:
Here are also some tries that I ever did:
(1) I ever put the PG86IMG.zip file (downloaded from http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564) to my sdcard, still failed.
(2) I ever formatted all partition from 4EXT recovery
Click to expand...
Click to collapse
EDIT:
Okay. I've got some questions.
1. You're stuck on some black screen as you said. It boots past the white HTC splash and then it's stuck on that black screen, right. Do you mean the juopunutbear "arrow screen" - juopunutbears boot.img?
2. I think if you had flashed the original boot img everything would have been fine.
3. The easiest way is to flash to stock, so lets try to figure out why it doesn't flash.
MrJyrks said:
Okay. So from what I understood, you are stuck on the black juopunutbear screen, right?
Click to expand...
Click to collapse
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
lsdyna said:
Yes, after I was stuck with black juopunutbear screen, I took battery out, reboot again, never was able to root to Android. I am only able to boot to HBoot.
Click to expand...
Click to collapse
And you can boot to recovery, right?
EDIT:
One more thing. Which ruu were you trying to run
Edit2:
What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Edit3:
BTW, this was on the wire trick page... http://unlimited.io/jbtroubleshooting.htm - TROUBLESHOOTING There was everything you needed to know when you failed at something. Remember that page. You may need it the next time you try to do the wiretrick.
Q: Were you using a linux distro for the wire trick and did you use the appropriate files for wire trick since GB and ICS have separate tools?
If you want I may assist you in gaining s-off if we get this thing functional again.
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
MrJyrks said:
And you can boot to recovery, right?
EDIT: One more thing. Which ruu were you trying to run
Edit2: What's your CID? Use "fastboot getvar cid" or "fastboot oem readcid" (without quotes).
Click to expand...
Click to collapse
lsdyna said:
Yes, I am able to boot to recovery.
I tried ROM's here
http://forum.xda-developers.com/showpost.php?p=24268786&postcount=209
and
http://forum.xda-developers.com/showthread.php?p=22519105#post22519105
I tried 2.17, 2.89, unfortunately none of them worked
My CID is SPCS_001
Click to expand...
Click to collapse
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Edit: This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Now I only want to revert my phone to stock, not considering root at present time.
I searched 2.95 ROM, unfortunately the highest version that I can find is 2.89. Does this mean I have no way to revert my phone to live? Thanks a lot.
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
MrJyrks said:
Aw man, I'm completely sorry I didn't see this: Software version: 2.95.651.6.710RD
That means, no RUU for you cause htc/sprint wasn't kind enough to provide the ruu. Also FYI you can't flash a ruu lower than your current one.
So your best bet is to flash the most stock 2.95 cdma rom you could find and right after, flash the stock cdma evo 3d kernel through fastboot or 4ext (I think 4ext smartflash does the same thing). Try to find something that's COMPLETELY STOCK - with no mods whatsoever or if you couldn't find any, try something that's almost* stock. That should get you booting and you can try s off again.
Click to expand...
Click to collapse
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
lsdyna said:
I ever run a RUU 1.13...exe for mmy phone, it said my device is having 1.000, and it tried to update to 1.13. However, the update procedure always failed at some point, some at beginning, some failed at 'wring signature'...
Click to expand...
Click to collapse
lsdyna said:
My HBoot screen shows below:
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.000
RADIO-1.09.00.0108
OpenADSP-v02.6.0.2226.00.0217
DO you think I still have chance to save my device? Thanks a lot.
Click to expand...
Click to collapse
If you have access to the recovery, most likely, yes.
Hello MrJyrks,
Thank you so much for the link! I am eager to try that. Before I do that I think I shall ask two questions to avoid further mess up the device:
Question #1: To install the deodexed rom, which is the correct way:
(1) Rename the ZIP file to PG86IMG.ZIP, put to root of sdcard, then boot, letting the Bootloader to do the update.
(2) In 4EXT recovery, enable smartflash, enable script asserts, then install the zip from the root of sdcard.
Question #2: You said I shall flash boot image, can you tell me how to do this? I mean, where shall I get the boot image file? Flash it with 4EXT? SHall I do it before or after install ROM zip file?
Thank you very much for your helps!!!
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I tried install the stock ROM from your link (using 4EXT with smartflash enabled and script asserts enabled.) . Amazing that installation completed successfully (indeed this is the first ROM zip that I was able to install successfully since I mess up the device). When I exit After that, it did some further update which I guess is the boot.img that you mentioned.
4EXT it said 'a pending update for your boot partition is detected' and I think it was doing the boot image flash that you mentioned, right?
Unfortunately when I boo the device, I still got black screen.
Now I am unlocked and also rooted (since I successfully installed superuser in 4EXT). DO you think I shall lock the devioce before installing the stock ROM? If so, one possible issue is that if I relock the device, I found 4EXT is not available. In that case, how shall I install the ROM zip file?
Thanks.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
Further update:
I flashed boot image by: fastboot flash boot boot.img which is included in the stock ROM zip file.
The flash went successfully. However, I am still not able to boot to Android. WHat I have is the device hang there, alternatively displaying logo with white background, and black screen.
MrJyrks said:
This shall work. http://www.negalite.com/index.php?topic=21.0 Try it and report back!!!
Flash like a normal rom and don't forget to flash the boot img because that's what's really causing you problems right now. I'd choose the deodexed one from there.
Click to expand...
Click to collapse
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
lsdyna said:
I wiped cache and Dalvic, then re-flash the ROM, now I am able to boot as normal.
MrJyrks, you are my life save!!!
Your helps are sincerely appreciated !
Click to expand...
Click to collapse
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
MrJyrks, thank you so much!!!
MrJyrks said:
You're welcome! I'm glad I could help!
---------- Post added at 12:02 PM ---------- Previous post was at 11:16 AM ----------
Oh, and if, in the future, you do try the wire trick and get stuck at some point you can revert the changes with ControlBear -r or ControlBear -f from command line. And you may also PM me if you need any help. Cheers!
Click to expand...
Click to collapse
Similar problem, can't return to stock
I have a problem similar to lsdyna's, and am hoping that even though this post is old, MrJyrks or someone might be able to help me.
I am unsuccessfully trying to return my phone to stock. First a bit of history.
I had 2.95.651.6.710RD s-on hboot 1.58 Android Version: 4.03 HTC Sense version: 3.6 on my phone, and wanted root. I didn't need s-off, just wanted to root so could do some tweaking (stop some apps from autostarting, stop some form getting network access, etc.) so loaded 4EXT Recovery Touch, and got root (fastboot oem get_identifier_token method), got superuser in there, and happily began tweaking. Famous last words... I didn't make a backup right away (learned my lesson!) and suddenly found a 'overtweaked' sluggish phone on my hands.
Thought best thing would be to lose the root & return to stock & start over, carefully, making backups.
So I used Fastboot (fastboot oem lock) to lock it (worked) and proceeded to try to load RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe into it [via my computer], but didn't realize until reading MrJyrks post that a lower RUU couldn't be used.
I now am relocked (phone does boot up, but can tell the system tweaks are still slogging it), lost the recovery, and wondering what to do... do I try putting recovery back in & using the Negalite 2.95 stock deodex ROM MrJyrks mentioned? If so, how do I use that zip file method verses the exe one I tried thru my computer?
Thanks for the help
You had issues with the RUU because your main version is higher than that contained in the RUU.
Unlock, flash recovery again. Boot into recovery and flash this zip: https://copy.com/wlVvwssXXNN00Pe
That will lower your main version. Relock the bootloader, put the phone into fastboot USB mode, then run the RUU while in fastboot USB mode.
Should be back to stock after that.

[Q] Going S-OFF from an updated HBOOT

So, I have a dilemma. I am currently S-ON running TACHYON 1.2 (Android 4.3)
HBOOT 2.28.0000
Radio 2.23.10.0123/4
I updated the hboot and radio while S-ON. Now, I've decided I'd like to go S-OFF. According to JuopunutBear I need to be on a stock RUU for their S-OFF to work. I tried running the newest ICS RUU a few weeks ago and found that it would just error out when it was checking the file because the radios and hboot on the phone were newer than the ones on the RUU. Can I step backwards in HBOOT versions whlie S-ON or have I kind of screwed myself? Or is there a better option I haven't thought about?
Thanks
Just install a stock Rom to run s-off program. You are on a stock hboot, so no problem there.
Sent from my DNA using my mind.
Uzephi said:
Just install a stock Rom to run s-off program. You are on a stock hboot, so no problem there.
Sent from my DNA using my mind.
Click to expand...
Click to collapse
It's a stock hboot, yes. But the RUU won't run because it is an older version hboot.
You need s-off to downgrade. Just install a stock based Rom that is rooted and run s-off procedure. You will have no issues. After s-off if you want, you can ruu
Sent from my DNA using my mind.
Step 1 from Unlimited: Verify - You are on Stock RUU (not FreshROM, Stock Rooted, HarmonyROM - none of these will work!)
They say not to be rooted or anything. What difference does it make?
Also, what do you mean by "stock rom"? Is there a stock rom I can install that is not an RUU? (maybe that's a dumb question but I don't know lol)
jeff925 said:
Step 1 from Unlimited: Verify - You are on Stock RUU (not FreshROM, Stock Rooted, HarmonyROM - none of these will work!)
They say not to be rooted or anything. What difference does it make?
Also, what do you mean by "stock rom"? Is there a stock rom I can install that is not an RUU? (maybe that's a dumb question but I don't know lol)
Click to expand...
Click to collapse
A stock rooted RUU would work. I was in your predicament once. First, do a nandroid backup then use this guide it'll get you to s-off. If you want to downgrade, then use this guide to accomplish this.
Thanks guys for the help. Installed the rom listed in the guide and it worked great. S-OFF now!! (Took me long enough...I've had the phone for 2 years!)
It installed JuopunutBear's hboot but whatever. I'd probably rather stick with a stock hboot but I can do that later.
Restored my nandroid backup and I'm back up and running like I never left.
Just flash this ROM and boot image, and you should be able to S-OFF, I can't remember if stock recovery is needed but that can be flashed separately as well if needed, but I don't think it is.
http://forum.xda-developers.com/showthread.php?t=2260154
So, All was well until I decided to flash the stock hboot back to the phone. I put the file on the sd card and renamed it ph98img.zip and flashed it in fastboot. It said it was successful and that I was running hboot 2.28 and radio 2.23.10.0123/4. Then I rebooted and it hung up at the white screen with green htc logo. I pulled the battery and rebooted holding the power and volume buttons. It booted to fastboot so I tried a few things. I tried flashing a recovery but it said that remote was not allowed and failed. Then I tried opening the recovery I already had on the phone from fastboot and it gave me the software download icon. Nothing happened so I pulled the battery and tried to boot back to fastboot. This time it wouldn't even get to fastboot. The white screen with HTC logo comes up and then the screen goes blank. Then the software download icon comes up and then shortly there after a red triangle with an exclamation point takes its place.
That went downhill fast! Any suggestions?
EDIT: Pulling the SD card allows me to get back into fastboot! But I'm still not sure what to do. Is it because my bootloader is locked?
jeff925 said:
So, All was well until I decided to flash the stock hboot back to the phone. I put the file on the sd card and renamed it ph98img.zip and flashed it in fastboot. It said it was successful and that I was running hboot 2.28 and radio 2.23.10.0123/4. Then I rebooted and it hung up at the white screen with green htc logo. I pulled the battery and rebooted holding the power and volume buttons. It booted to fastboot so I tried a few things. I tried flashing a recovery but it said that remote was not allowed and failed. Then I tried opening the recovery I already had on the phone from fastboot and it gave me the software download icon. Nothing happened so I pulled the battery and tried to boot back to fastboot. This time it wouldn't even get to fastboot. The white screen with HTC logo comes up and then the screen goes blank. Then the software download icon comes up and then shortly there after a red triangle with an exclamation point takes its place.
That went downhill fast! Any suggestions?
EDIT: Pulling the SD card allows me to get back into fastboot! But I'm still not sure what to do. Is it because my bootloader is locked?
Click to expand...
Click to collapse
In fastboot does it say s-off? Try manually flashing the boot.img by extracting it. If you haven't setup enviroment variable for fastboot put the boot.img in the same directory as fastboot.exe and use command prompt by typing
Code:
cd C:\Android\platform-tools (or wherever it is for you)
Then type
Code:
fastboot flash boot boot.img
I was able to put an RUU on another sd card and flash that. So now I'm on ICS 4.03.605.2 and running. But I still haven't solved my recovery problems.
According to this thread: androidforums.com/rezound-all-things-root/550408-s-off-guide-info-return-stock.html
I can either use juopunutbear's hboot (which I just flashed over the top of) to flash a new recovery or I can compile a recovery in a ph98img file (which I don't know how to do or want to do).
My question is: What happens if I unlock my bootloader while S-OFF? (Yes, it says s-off on the bootloader screen.) Will that solve my problem or do I have to go back to juopunutbear's hboot?
jeff925 said:
I was able to put an RUU on another sd card and flash that. So now I'm on ICS 4.03.605.2 and running. But I still haven't solved my recovery problems.
According to this thread: androidforums.com/rezound-all-things-root/550408-s-off-guide-info-return-stock.html
I can either use juopunutbear's hboot (which I just flashed over the top of) to flash a new recovery or I can compile a recovery in a ph98img file (which I don't know how to do or want to do).
My question is: What happens if I unlock my bootloader while S-OFF? (Yes, it says s-off on the bootloader screen.) Will that solve my problem or do I have to go back to juopunutbear's hboot?
Click to expand...
Click to collapse
You can unlock when S-OFF, but there is no reason to, you can get a PH98img.zip of CWM here: http://forum.xda-developers.com/showthread.php?t=1914215 or TWRP here: http://forum.xda-developers.com/showthread.php?t=1902381 and just copy it to your sd card (remember to name it exactly PH98IMG.zip, beware the Windoze "double zip" issue) then pop it in the phone, boot into Hboot with the USB disconnected and it should recognize it and flash either CWM or TWRP. from there you can flash ANYTHING you want, being S-OFF with custom recovery allows you to flash anything, no fastboot commands required.
Also, since you are S-OFF, your Hboot is mostly irrelevant, but should be the matching version to your radios... an engineered hboot (like Juopunutbears) would allow fastboot commands well locked, but fastboot isn't generally needed once S-OFF has been obtained...
Try this. no wire even, works great.
http://forum.xda-developers.com/showthread.php?p=48911002#post48911002
i am on hboot 2.25 though. im thinking of updating my hboot still researching how exactly.
4218kris said:
Try this. no wire even, works great.
http://forum.xda-developers.com/showthread.php?p=48911002#post48911002
i am on hboot 2.25 though. im thinking of updating my hboot still researching how exactly.
Click to expand...
Click to collapse
i can help with that....its pretty easy if your already s-off
---------- Post added at 03:26 AM ---------- Previous post was at 03:22 AM ----------
jeff925 said:
I was able to put an RUU on another sd card and flash that. So now I'm on ICS 4.03.605.2 and running. But I still haven't solved my recovery problems.
According to this thread: androidforums.com/rezound-all-things-root/550408-s-off-guide-info-return-stock.html
I can either use juopunutbear's hboot (which I just flashed over the top of) to flash a new recovery or I can compile a recovery in a ph98img file (which I don't know how to do or want to do).
My question is: What happens if I unlock my bootloader while S-OFF? (Yes, it says s-off on the bootloader screen.) Will that solve my problem or do I have to go back to juopunutbear's hboot?
Click to expand...
Click to collapse
and what recovery problems are you having....flashing an hboot will not give you a recovery...and an ruu is an exe file not a ph98img file...those are OTA's.....if you need pure stock i can easily help you obtain it....i just need to know what exactly your trying to achieve
REV3NT3CH said:
i can help with that....its pretty easy if your already s-off
---------- Post added at 03:26 AM ---------- Previous post was at 03:22 AM ----------
Click to expand...
Click to collapse
i believe i can flash hboot with a ph98img yea? can you link me to the best/newest 2.28 i think.
4218kris said:
i believe i can flash hboot with a ph98img yea? can you link me to the best/newest 2.28 i think.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40767819&postcount=33
4218kris said:
i believe i can flash hboot with a ph98img yea? can you link me to the best/newest 2.28 i think.
Click to expand...
Click to collapse
that one or the this 2nd ph98img in my downgrade/upgrade guide work as well...that one is just radios and hboot....doesnt come with stock <3e> recovery
REV3NT3CH said:
if you need pure stock i can easily help you obtain it....i just need to know what exactly your trying to achieve
Click to expand...
Click to collapse
Hey REV3NT3CH,
So, thanks to the help of so many in these parts, including you, I now think I'm S-Off and I'm very interested in bringing my phone up to the latest, completely stock OTA ROM. Can you help me with that?
Thanks!
cheers,
john
jrredho said:
Hey REV3NT3CH,
So, thanks to the help of so many in these parts, including you, I now think I'm S-Off and I'm very interested in bringing my phone up to the latest, completely stock OTA ROM. Can you help me with that?
Thanks!
cheers,
john
Click to expand...
Click to collapse
when you boot into your bootloader...does your hboot now say S-OFF....if so i can give you everything you need and what id suggest doing just prior to doing it
REV3NT3CH said:
when you boot into your bootloader...does your hboot now say S-OFF..
Click to expand...
Click to collapse
Yes it does.
REV3NT3CH said:
.if so i can give you everything you need and what id suggest doing just prior to doing it
Click to expand...
Click to collapse
That would be fantastic!
Thanks,
John

Help making phone usable, can go into recovery mode, but can't boot up to any roms

Hi,
I have a Sprint HTC Evo3D
-HTCDev "Unlocked"
-Shooter XC Ship S-ON RL
-HBOOT 1.50
-TWRP Recovery 2.8.7 Loaded
I'm trying to make this phone usable, and all guides kind of shoot me in dead end. Nothing is working, and i tried flashing a bunch of random roms.
Can anyone give me directions, or point me in the right direction? I'm looking to revert this to a stock rom or something usable. Preferably the latest Andriod revision. I don't care for root, or anything special... I just need the wifi and browser, this isn't a service phone.
masterdukill said:
Hi,
I have a Sprint HTC Evo3D
-HTCDev "Unlocked"
-Shooter XC Ship S-ON RL
-HBOOT 1.50
-TWRP Recovery 2.8.7 Loaded
I'm trying to make this phone usable, and all guides kind of shoot me in dead end. Nothing is working, and i tried flashing a bunch of random roms.
Can anyone give me directions, or point me in the right direction? I'm looking to revert this to a stock rom or something usable. Preferably the latest Andriod revision. I don't care for root, or anything special... I just need the wifi and browser, this isn't a service phone.
Click to expand...
Click to collapse
Try to flash boot.img from the rom.rar that you have installed. What is your radio baseband version?
Coaxs94 said:
Try to flash boot.img from the rom.rar that you have installed. What is your radio baseband version?
Click to expand...
Click to collapse
How do i tell what radio baseband do i have?
When you say try to flash the boot.img, do you mean literally "fastboot flash recovery xxxx.img" to the system? I grabbed the VILLUMINATI-08152014-shooter.zip & it did flash via the TWRP, but did not boot up afterwards.
masterdukill said:
How do i tell what radio baseband do i have?
When you say try to flash the boot.img, do you mean literally "fastboot flash recovery xxxx.img" to the system? I grabbed the VILLUMINATI-08152014-shooter.zip & it did flash via the TWRP, but did not boot up afterwards.
Click to expand...
Click to collapse
No, actually "fastboot flash boot boot.img" to the system. Just extract boot.img form rom.zip and put it to your ADB tools folder a hit "fastboot flash boot boot.img" command, try it. Does bootloader shows your radio version? Check that.
villuminati, liquid smooth both require s-off and specific HBOOT.
you are s-on. cm11 won't run.
try a stock-based rom, those should work.
oops, read closer, you're not finding stock roms.
this one works ok without s-off on the two 3vo's I tried it on.http://forum.xda-developers.com/htc-evo-3d/cdma-development/rom-3d-anthology-12-18-2014-t2977403
bigsupersquid said:
oops, read closer, you're not finding stock roms.
this one works ok without s-off on the two 3vo's I tried it on.http://forum.xda-developers.com/htc-evo-3d/cdma-development/rom-3d-anthology-12-18-2014-t2977403
Click to expand...
Click to collapse
I tried flashing the base, waiting 20min, and got nothing. The phone is stuck on the white HTC boot screen logo. I then flashed the badassrom over it, and got the same result. FYI, i'm using the twrp recovery to flash both these roms.
Does anybody have a link to the stock rom? I tried the "PG86IMG_Shooter_S_Sprint_WWE_2.17.651.5_Radio_1.06.00.1216_NV_NV_spcs_1.42_release_233304-signed.zip" and it seemed to be stuck also.
Any other ideas?
you could try flashing an official RUU
they're posted in the stickies somewhere.
that'll rewrite all your firmware to something that should hopefully boot up.
bigsupersquid said:
you could try flashing an official RUU
they're posted in the stickies somewhere.
that'll rewrite all your firmware to something that should hopefully boot up.
Click to expand...
Click to collapse
When you flash the RUU, is that running through the executable? I find that impossible b/c it requires you to have a working OS first to start off with? Can you flash a RUU with fastboot?
masterdukill said:
When you flash the RUU, is that running through the executable? I find that impossible b/c it requires you to have a working OS first to start off with? Can you flash a RUU with fastboot?
Click to expand...
Click to collapse
there's .exe ruu's for window$ fastboot and PG86IMG.zip files for the root of your SD card in fastboot. since the phone's gotten long in the tooth a lot of links are dead so you may need to hunt a bit.
bigsupersquid said:
there's .exe ruu's for window$ fastboot and PG86IMG.zip files for the root of your SD card in fastboot. since the phone's gotten long in the tooth a lot of links are dead so you may need to hunt a bit.
Click to expand...
Click to collapse
Couldn't' find much working links on this forum, but i googled & found "PG86IMG_Shooter_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706_signed.zip" on other forums. Renamed it, rebooted to bootloader & this phone is alive again! Thanks for the help

Categories

Resources