Hello,
I've been trying to flash the old .58 firmware on my device in order to be able to root it.
I'm using Flashtool and followed the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=1559685
So I downloaded the .58 and when I try to connect my phone in flashmode, Flashtool says the following:
Code:
17/032/2012 09:32:48 - INFO - <- This level is successfully initialized
17/032/2012 09:32:48 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:14
17/032/2012 09:32:48 - INFO - You can drag and drop ftf files here to start flashing them
17/032/2012 09:32:51 - INFO - Device connected with USB debugging off
17/032/2012 09:32:51 - INFO - For 2011 devices line, be sure you are not in MTP mode
17/032/2012 09:32:55 - INFO - Selected WT19i_4.0.2.A.0.58_(1254-1868).ftf
17/032/2012 09:32:55 - INFO - Preparing files for flashing
17/032/2012 09:32:56 - INFO - Please connect your device into flashmode.
17/033/2012 09:33:01 - INFO - Device disconnected
17/033/2012 09:33:05 - INFO - Device connected in flash mode
17/033/2012 09:33:05 - INFO - Reading device information
17/033/2012 09:33:25 - INFO - Start Flashing
17/033/2012 09:33:25 - INFO - Flashing loader
17/033/2012 09:33:25 - INFO - Ending flash session
17/033/2012 09:33:25 - ERROR -
17/033/2012 09:33:25 - ERROR - Error flashing. Aborted
17/033/2012 09:33:25 - INFO - Device disconnected
17/033/2012 09:33:40 - INFO - Device connected with USB debugging off
17/033/2012 09:33:40 - INFO - For 2011 devices line, be sure you are not in MTP mode
This is the complete output.
Additional information: I am using Linux(64-bit) and installed FlashTool according to the instructions on their site. Some people say you need to install some kind of drivers? I have the android-sdk installed but I don't see any drivers in the ./drivers directory in flashtool.
Here's the terminal output:
Code:
[email protected] ~/Downloads/FlashTool $ sudo ./FlashTool
[sudo] password for andreas:
JAVA_HOME not set. Using default value : ./x10flasher_lib/linjre64
WT19i_4.0.2.A.0.58_(1254-1868).ftf
WT19i_4.0.2.A.0.58_(1254-1868).ftf
java.io.IOException: readReply : First data read request failed
at linuxlib.JUsb.readS1Device(JUsb.java:108)
at flashsystem.io.USBFlashLinux.readS1Reply(USBFlashLinux.java:55)
at flashsystem.io.USBFlash.readS1Reply(USBFlash.java:45)
at flashsystem.X10flash.openDevice(X10flash.java:404)
at flashsystem.X10flash.openDevice(X10flash.java:345)
at gui.FlasherGUI$43.run(FlasherGUI.java:1058)
at foxtrot.AbstractWorkerThread$1.run(AbstractWorkerThread.java:40)
at java.security.AccessController.doPrivileged(Native Method)
at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:36)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:199)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:182)
at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
at flashsystem.X10flash.processHeader(X10flash.java:181)
at flashsystem.X10flash.uploadImage(X10flash.java:196)
at flashsystem.X10flash.sendLoader(X10flash.java:225)
at flashsystem.X10flash.flashDevice(X10flash.java:317)
at gui.FlasherGUI$43.run(FlasherGUI.java:1059)
at foxtrot.AbstractWorkerThread$1.run(AbstractWorkerThread.java:40)
at java.security.AccessController.doPrivileged(Native Method)
at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:36)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:199)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:182)
at java.lang.Thread.run(Unknown Source)
flashsystem.X10FlashException
at flashsystem.X10flash.uploadImage(X10flash.java:217)
at flashsystem.X10flash.sendLoader(X10flash.java:225)
at flashsystem.X10flash.flashDevice(X10flash.java:317)
at gui.FlasherGUI$43.run(FlasherGUI.java:1059)
at foxtrot.AbstractWorkerThread$1.run(AbstractWorkerThread.java:40)
at java.security.AccessController.doPrivileged(Native Method)
at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:36)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:199)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:182)
at java.lang.Thread.run(Unknown Source)
The exceptions appear at the same time the error in flashtool comes up.
I've been trying it many times now, but I can't get it to work.
Any help is greatly appreciated. Thanks in advance.
EDIT: Using an older version of FlashTool seems to have fixed the problem. Currently flashing.
Bump
Can noone give me any advice on this? The error always happens exactly 20 seconds after connecting the phone in flashmode.
Try using in windows may solve..gud luck
Sent from my WT19i using xda premium
Report this bug at the flashtool thread
Related
SOLVED.. used SEUS form this thread http://forum.xda-developers.com/showthread.php?t=1264477 and made a repair..
Hi all, i got a bricked X10 mini for free today. Its suck on SE boot screen
I know its bricked by an wrong rom updating. I can get into flash mode, there is no SD card in the phone.
SE PC companion detects, but not by correct model but as a SE Phone so there is no repair option here.
Then i tried with Flashtool and with version 0.6.5 i get the following log
05/033/2012 20:33:14 - INFO - <- This level is successfully initialized
05/033/2012 20:33:14 - INFO - Flashtool Version 0.6.5 built on 2012-01-04 19:11:08
05/033/2012 20:33:19 - INFO - Device disconnected
05/033/2012 20:33:26 - INFO - Selected X10_V1_BLRelock.ftf
05/033/2012 20:33:26 - INFO - Preparing files for flashing
05/033/2012 20:33:26 - INFO - Please connect your device into flashmode.
05/034/2012 20:34:22 - INFO - Device connected in flash mode
05/034/2012 20:34:22 - INFO - Start Flashing
05/034/2012 20:34:22 - INFO - Flashing loader
05/034/2012 20:34:22 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
05/034/2012 20:34:22 - ERROR - Error flashing. Aborted
05/034/2012 20:34:23 - INFO - Device connected in flash mode
Any hints on if i can bring back this nice little thing ?
ident..
Hi,
I think, just bricked my phone.
I'm under Windows 7 64, I've installed Flashtool 0.6.8.0 and I can get nothing to work. Yes I installed the drivers and Yes I'm sure they works.
After trying to unlock the bootloader with the tuto of this thread, I finaly come to what looks like a bricked phone.
I can get access to flashmode on the X10 (back + USB). Normal boot does just hows the "Sony Ericson" Text
When I try to flash ANY ftf I've got this :
Code:
08/043/2012 19:43:32 - INFO - <- This level is successfully initialized
08/043/2012 19:43:32 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
08/043/2012 19:43:32 - INFO - You can drag and drop ftf files here to start flashing them
08/043/2012 19:43:36 - INFO - Device disconnected
08/043/2012 19:43:39 - INFO - Selected X10_V1_BLRelock.ftf
08/043/2012 19:43:39 - INFO - Preparing files for flashing
08/043/2012 19:43:39 - INFO - Please connect your device into flashmode.
08/044/2012 19:44:29 - INFO - Device connected in flash mode
08/044/2012 19:44:29 - INFO - Opening device for R/W
08/044/2012 19:44:29 - INFO - Start Flashing
08/044/2012 19:44:29 - ERROR -
08/044/2012 19:44:29 - ERROR - Error flashing. Aborted
08/044/2012 19:44:29 - INFO - Device connected in flash mode
08/045/2012 19:45:23 - INFO - Device disconnected
08/045/2012 19:45:39 - INFO - Device connected in flash mode
08/046/2012 19:46:11 - INFO - Device disconnected
08/046/2012 19:46:13 - INFO - Device connected in flash mode
08/046/2012 19:46:26 - INFO - Device disconnected
08/046/2012 19:46:41 - INFO - Device connected in flash mode
08/046/2012 19:46:49 - INFO - Device disconnected
08/047/2012 19:47:04 - INFO - Device connected with USB debugging off
08/047/2012 19:47:04 - INFO - For 2011 devices line, be sure you are not in MTP mode
08/047/2012 19:47:13 - INFO - Device disconnected
08/047/2012 19:47:16 - INFO - Device connected with USB debugging off
08/047/2012 19:47:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
08/047/2012 19:47:16 - INFO - Device connected with USB debugging on
08/047/2012 19:47:16 - ERROR - Cannot identify your device.
08/047/2012 19:47:16 - INFO - Selecting from user input
08/047/2012 19:47:55 - INFO - Device disconnected
08/048/2012 19:48:19 - INFO - Connected device : X10
08/048/2012 19:48:19 - INFO - Installed version of busybox : N/A
08/048/2012 19:48:19 - INFO - Android version : / kernel version :
08/048/2012 19:48:19 - INFO - Phone in recovery mode
08/048/2012 19:48:19 - INFO - Root Access Allowed
08/048/2012 19:48:28 - INFO - Device connected in flash mode
08/048/2012 19:48:35 - INFO - Selected X10_V1_BLRelock.ftf
08/048/2012 19:48:35 - INFO - Preparing files for flashing
08/048/2012 19:48:35 - INFO - Please connect your device into flashmode.
08/048/2012 19:48:36 - INFO - Opening device for R/W
08/048/2012 19:48:36 - INFO - Start Flashing
08/048/2012 19:48:36 - ERROR -
08/048/2012 19:48:36 - ERROR - Error flashing. Aborted
08/048/2012 19:48:36 - INFO - Device connected in flash mode
08/048/2012 19:48:40 - INFO - Selected X10_V1_BLRelock.ftf
08/048/2012 19:48:40 - INFO - Preparing files for flashing
08/048/2012 19:48:40 - INFO - Please connect your device into flashmode.
08/048/2012 19:48:41 - INFO - Opening device for R/W
08/048/2012 19:48:41 - INFO - Start Flashing
08/048/2012 19:48:41 - ERROR -
08/048/2012 19:48:41 - ERROR - Error flashing. Aborted
08/048/2012 19:48:41 - INFO - Device connected in flash mode
I've got mad on this problem for several days.
Hope You can find an answer to this problem.
Sorry if it is a nood problem or if it already have been discussed, but I can't figure out how to use the unlock thread beceause of dead links and lack of explanation.
Thanks in advance for the time you spend on this issue.
Hey,
Did u try repairing ur phone with PC Companion? It works most of the time, search for PC companion on google & u will find it
See if this guide is easier to understand
http://forum.xda-developers.com/showthread.php?t=928343
Grea09 said:
Hi,
I think, just bricked my phone.
I'm under Windows 7 64, I've installed Flashtool 0.6.8.0 and I can get nothing to work. Yes I installed the drivers and Yes I'm sure they works.
After trying to unlock the bootloader with the tuto of this thread, I finaly come to what looks like a bricked phone.
I can get access to flashmode on the X10 (back + USB). Normal boot does just hows the "Sony Ericson" Text
When I try to flash ANY ftf I've got this :
Code:
08/043/2012 19:43:32 - INFO - <- This level is successfully initialized
08/043/2012 19:43:32 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
08/043/2012 19:43:32 - INFO - You can drag and drop ftf files here to start flashing them
08/043/2012 19:43:36 - INFO - Device disconnected
08/043/2012 19:43:39 - INFO - Selected X10_V1_BLRelock.ftf
08/043/2012 19:43:39 - INFO - Preparing files for flashing
08/043/2012 19:43:39 - INFO - Please connect your device into flashmode.
08/044/2012 19:44:29 - INFO - Device connected in flash mode
08/044/2012 19:44:29 - INFO - Opening device for R/W
08/044/2012 19:44:29 - INFO - Start Flashing
08/044/2012 19:44:29 - ERROR -
08/044/2012 19:44:29 - ERROR - Error flashing. Aborted
08/044/2012 19:44:29 - INFO - Device connected in flash mode
08/045/2012 19:45:23 - INFO - Device disconnected
08/045/2012 19:45:39 - INFO - Device connected in flash mode
08/046/2012 19:46:11 - INFO - Device disconnected
08/046/2012 19:46:13 - INFO - Device connected in flash mode
08/046/2012 19:46:26 - INFO - Device disconnected
08/046/2012 19:46:41 - INFO - Device connected in flash mode
08/046/2012 19:46:49 - INFO - Device disconnected
08/047/2012 19:47:04 - INFO - Device connected with USB debugging off
08/047/2012 19:47:04 - INFO - For 2011 devices line, be sure you are not in MTP mode
08/047/2012 19:47:13 - INFO - Device disconnected
08/047/2012 19:47:16 - INFO - Device connected with USB debugging off
08/047/2012 19:47:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
08/047/2012 19:47:16 - INFO - Device connected with USB debugging on
08/047/2012 19:47:16 - ERROR - Cannot identify your device.
08/047/2012 19:47:16 - INFO - Selecting from user input
08/047/2012 19:47:55 - INFO - Device disconnected
08/048/2012 19:48:19 - INFO - Connected device : X10
08/048/2012 19:48:19 - INFO - Installed version of busybox : N/A
08/048/2012 19:48:19 - INFO - Android version : / kernel version :
08/048/2012 19:48:19 - INFO - Phone in recovery mode
08/048/2012 19:48:19 - INFO - Root Access Allowed
08/048/2012 19:48:28 - INFO - Device connected in flash mode
08/048/2012 19:48:35 - INFO - Selected X10_V1_BLRelock.ftf
08/048/2012 19:48:35 - INFO - Preparing files for flashing
08/048/2012 19:48:35 - INFO - Please connect your device into flashmode.
08/048/2012 19:48:36 - INFO - Opening device for R/W
08/048/2012 19:48:36 - INFO - Start Flashing
08/048/2012 19:48:36 - ERROR -
08/048/2012 19:48:36 - ERROR - Error flashing. Aborted
08/048/2012 19:48:36 - INFO - Device connected in flash mode
08/048/2012 19:48:40 - INFO - Selected X10_V1_BLRelock.ftf
08/048/2012 19:48:40 - INFO - Preparing files for flashing
08/048/2012 19:48:40 - INFO - Please connect your device into flashmode.
08/048/2012 19:48:41 - INFO - Opening device for R/W
08/048/2012 19:48:41 - INFO - Start Flashing
08/048/2012 19:48:41 - ERROR -
08/048/2012 19:48:41 - ERROR - Error flashing. Aborted
08/048/2012 19:48:41 - INFO - Device connected in flash mode
I've got mad on this problem for several days.
Hope You can find an answer to this problem.
Sorry if it is a nood problem or if it already have been discussed, but I can't figure out how to use the unlock thread beceause of dead links and lack of explanation.
Thanks in advance for the time you spend on this issue.
Click to expand...
Click to collapse
This is happening because you don't have installed USB FLASH driver for your phone..Try with this..Find in folder where you installed Flashtool, folder named "Drivers", and install drivers "X10" something, and "Flashmode" drivers..after you do that, connect your phone in flash mode (turn off phone, press "back" button and plug in your phone)..It should recognize USB flash driver..So after that's recognized..you can do whatever you want in flashtool.
Just be sure if you do RELOCKING your BL, follow all of the procedures provided in thread for RELOCKING..
And I think that you shouldn't have custom kernel if you do that ..
This phone is not bricked..Just do what I said..
Cheers
---------- Post added at 01:00 AM ---------- Previous post was at 12:53 AM ----------
And don't flash "any .ftf file"...that's not cool :d..just flash in the way it's written in threads..
PC companion asks to slide down the status bar and activate PC Companion on the phone. I don't have status bar.
I tried almost all topic of this forum that explain that. I followed them carefully, but it seems I've got a problem that is explained now where.
The phone just comes from the Sony Ericson repair center. They changed the mother board. Maybe related with this issue. I've first easily (hum, hum drivers) rooted it and put the recovery. I tried to install a CM7 ROM themed like ICS (I can't refind it, maybee later) and in doing so I tried to flash a Kernel. It just said we have to unlock bootloader so it's what I tried, but I've got this error. Now I just try to fiw the phone to have a second attempt at this.
In your link I've done the folowing :
lanch flashtool
click flash button
selected Reblock
put the device in flashmode
and that's what it says :
Code:
10/022/2012 11:22:01 - INFO - <- This level is successfully initialized
10/022/2012 11:22:01 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
10/022/2012 11:22:01 - INFO - You can drag and drop ftf files here to start flashing them
10/022/2012 11:22:07 - INFO - Device disconnected
10/022/2012 11:22:26 - INFO - Selected X10_V1_BLRelock.ftf
10/022/2012 11:22:26 - INFO - Preparing files for flashing
10/022/2012 11:22:26 - INFO - Please connect your device into flashmode.
10/022/2012 11:22:30 - INFO - Opening device for R/W
10/022/2012 11:22:30 - INFO - Device connected in flash mode
10/022/2012 11:22:30 - INFO - Start Flashing
10/022/2012 11:22:30 - ERROR -
10/022/2012 11:22:30 - ERROR - Error flashing. Aborted
10/022/2012 11:22:30 - INFO - Device connected in flash mode
10/022/2012 11:22:54 - INFO - Device connected with USB debugging off
10/022/2012 11:22:54 - INFO - For 2011 devices line, be sure you are not in MTP mode
10/023/2012 11:23:04 - INFO - Device disconnected
10/023/2012 11:23:07 - INFO - Device connected with USB debugging off
10/023/2012 11:23:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
10/023/2012 11:23:08 - INFO - Device connected with USB debugging on
10/023/2012 11:23:08 - ERROR - Cannot identify your device.
10/023/2012 11:23:08 - INFO - Selecting from user input
10/023/2012 11:23:17 - INFO - Connected device : X10
10/023/2012 11:23:17 - INFO - Installed version of busybox : N/A
10/023/2012 11:23:17 - INFO - Android version : / kernel version : - exec '/system/bin/sh' failed: No such file or directory (2) -
You start pc conpanion,click a few things (update/repair/put in x10) THEN connect your phone
Sent from my X10i using xda premium
PROleev said:
This is happening because you don't have installed USB FLASH driver for your phone..Try with this..Find in folder where you installed Flashtool, folder named "Drivers", and install drivers "X10" something, and "Flashmode" drivers..after you do that, connect your phone in flash mode (turn off phone, press "back" button and plug in your phone)..It should recognize USB flash driver..So after that's recognized..you can do whatever you want in flashtool.
Just be sure if you do RELOCKING your BL, follow all of the procedures provided in thread for RELOCKING..
And I think that you shouldn't have custom kernel if you do that ..
This phone is not bricked..Just do what I said..
Cheers
---------- Post added at 01:00 AM ---------- Previous post was at 12:53 AM ----------
And don't flash "any .ftf file"...that's not cool :d..just flash in the way it's written in threads..
Click to expand...
Click to collapse
I've already installed the drivers from C:\Program Files\SonyEricson\Gordon Gate\
theunderling said:
You start pc conpanion,click a few things (update/repair/put in x10) THEN connect your phone
Sent from my X10i using xda premium
Click to expand...
Click to collapse
I tried it. It just says : PC Companion is unable to connect to your phone please deconect an reconect.
For more help blahbla.
When I try repair it download a ROM and tries to flash it. after unsuccessful try in stadard mode (Slide down the status bar...) it ask me wich phone it is and ask me to put it on flashmod. I've done it and the software don't even react.
Ive had all sorts of errors etc,and always got my phone to work.I can only throw some ideas around,as Ive seen simple things succeeding
Try various flashtool versions
Run them as administrator
Use xp
Charge battery
Remove battery for 10 mins
Reflash/reroot(doomlords easy rooting kit)
Sent from my X10i using xda premium
theunderling said:
Ive had all sorts of errors etc,and always got my phone to work.I can only throw some ideas around,as Ive seen simple things succeeding
Try various flashtool versions
Run them as administrator
Use xp
Charge battery
Remove battery for 10 mins
Reflash/reroot(doomlords easy rooting kit)
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Trying that, thanks !
Grea09 said:
I tried almost all topic of this forum that explain that. I followed them carefully, but it seems I've got a problem that is explained now where.
The phone just comes from the Sony Ericson repair center. They changed the mother board. Maybe related with this issue. I've first easily (hum, hum drivers) rooted it and put the recovery. I tried to install a CM7 ROM themed like ICS (I can't refind it, maybee later) and in doing so I tried to flash a Kernel. It just said we have to unlock bootloader so it's what I tried, but I've got this error. Now I just try to fiw the phone to have a second attempt at this.
In your link I've done the folowing :
lanch flashtool
click flash button
selected Reblock
put the device in flashmode
and that's what it says :
Code:
10/022/2012 11:22:01 - INFO - <- This level is successfully initialized
10/022/2012 11:22:01 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
10/022/2012 11:22:01 - INFO - You can drag and drop ftf files here to start flashing them
10/022/2012 11:22:07 - INFO - Device disconnected
10/022/2012 11:22:26 - INFO - Selected X10_V1_BLRelock.ftf
10/022/2012 11:22:26 - INFO - Preparing files for flashing
10/022/2012 11:22:26 - INFO - Please connect your device into flashmode.
10/022/2012 11:22:30 - INFO - Opening device for R/W
10/022/2012 11:22:30 - INFO - Device connected in flash mode
10/022/2012 11:22:30 - INFO - Start Flashing
10/022/2012 11:22:30 - ERROR -
10/022/2012 11:22:30 - ERROR - Error flashing. Aborted
10/022/2012 11:22:30 - INFO - Device connected in flash mode
10/022/2012 11:22:54 - INFO - Device connected with USB debugging off
10/022/2012 11:22:54 - INFO - For 2011 devices line, be sure you are not in MTP mode
10/023/2012 11:23:04 - INFO - Device disconnected
10/023/2012 11:23:07 - INFO - Device connected with USB debugging off
10/023/2012 11:23:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
10/023/2012 11:23:08 - INFO - Device connected with USB debugging on
10/023/2012 11:23:08 - ERROR - Cannot identify your device.
10/023/2012 11:23:08 - INFO - Selecting from user input
10/023/2012 11:23:17 - INFO - Connected device : X10
10/023/2012 11:23:17 - INFO - Installed version of busybox : N/A
10/023/2012 11:23:17 - INFO - Android version : / kernel version : - exec '/system/bin/sh' failed: No such file or directory (2) -
Click to expand...
Click to collapse
For UNLOCKING BOOTLOADER, please READ AND FOLLOW THIS CAREFULLY..
Thanks a million !
It works !
The problem was caused by not running as Administrator, what a tiny thing.
Hope it can help other people with same problem, but it would be great to have a sticky "Repair your phone" post with all usual issue like this one.
And again thanks for your support.
A result
Sent from my X10i using xda premium
Help!
wait wait, the problem was not running as Administrator? can u please tell me how did u do it because my x10 is bricked for a month and i am desesperate =(
PS:srry for the bad english
its not BRICKED even i've faced this
you need to have this x10_2.3_aro.ftf .. which is the normal unrooted x10 rom given by sony at the phones manufacture.
requirements:
adb drivers installed
x10_2.3_aro.ftf
latest version of Flashtool
CAUTION: by following these steps you will lose all your phone information.. so you always need to have some backup
if the same problems persists at the time when you switch ON your phone ... follow these steps
1: make sure that you are not lagging by battery
2: remove the battery and connect the mobile via USB
3: run the flash tool which is already installed on your PC
4: Flash it with the downloaded file (i.e x10_2.3_aro.ftf)
5: when the flash tool says to connect your phone in flash mode then press back button and put on the battery and keep the back button pressed for a while
6: if the phone is connected in flash mode, well and good- then the 2.3.3 will be installed on your phone
7: if it is not connected in flash mode then repeat the 5th step ... you will surely get into the flash mode
8: after the flashing completes then you can again root the phone from the available option in flashtool and also install the xrecovery and unlock your boot loader
any problem regarding x10 booting can be brought to the happy mood by making these steps but you need to have a backup of your phone data
Hi everyone,
I use Ubuntu 12.04 moved Flashtool on my system added the
rules to /etc/udev (checked from this Guide) and also readed this one.
With lsusb the device looks connected when even if the smartphone is
startet normal and when the device is OFF and i connect the usb cable
and press the volume down button.
It is not sure for me how i can start my device in flashmode as
it let flashtool its work with SK17i_4.0.2.A.0.62_Baseband+Kernel.ftf.
Can somebody explain me how i can proof that the device is startet
in flashmode correctly? Do it boot in a other way and show something
in flashmode or is the display after SE normaly blank?
My next step is that i like to get it updated and rooted (with this
update_4.0.2.A.0.69_SK17_PreRoot-Ex.zip one i guess). Must i transfer
this update with flashtool too? Or how can i bring this update on my device?
Flashtool dont start to flash my device (maybe becuse i have no clue
to start it correctly in flashmode). Or do i need to install an app?
steavenX said:
Hi everyone,
I use Ubuntu 12.04 moved Flashtool on my system added the
rules to /etc/udev (checked from this Guide) and also readed this one.
With lsusb the device looks connected when even if the smartphone is
startet normal and when the device is OFF and i connect the usb cable
and press the volume down button.
Click to expand...
Click to collapse
Yes, but when the device is turned off, first hold down the Volume DOWN button, then connect the cable.
steavenX said:
It is not sure for me how i can start my device in flashmode as
it let flashtool its work with SK17i_4.0.2.A.0.62_Baseband+Kernel.ftf.
Can somebody explain me how i can proof that the device is startet
in flashmode correctly? Do it boot in a other way and show something
in flashmode or is the display after SE normaly blank?
Click to expand...
Click to collapse
If you did, like I said previously, green LED lights up, display stays off and your device in flashmode.
steavenX said:
My next step is that i like to get it updated and rooted (with this
update_4.0.2.A.0.69_SK17_PreRoot-Ex.zip one i guess). Must i transfer
this update with flashtool too? Or how can i bring this update on my device?
Flashtool dont start to flash my device (maybe becuse i have no clue
to start it correctly in flashmode). Or do i need to install an app?
Click to expand...
Click to collapse
No, this has to be installed via Recovery. Recovery requires custom kernel(and unlocked bootloader) or rooted ROM(which is pointless then).
Install older firmware, .58 or older, root it and then make direct update from your phone to .62(.69 if you're in Germany).
Place your phone in flashmode, when Flashtool asks it. Make sure drivers are properly installed, no additional apps needed.
Show me the rules
Sent from my SK17a using xda premium
Thanks for your answer. I googled a little bit and found that
there was an update for flashtool released.
Code:
* 0.8.0.0 :
[b]- Fixed an issue with flashing ftf under linux (specially ubuntu 12.04) [/b]
- Fixed system app backup when ls applet used to enumerate system apps is busybox one with colorization
- Added a kernel.sin extractor (ELF Extractor) to get image, ramdisk and rpm.bin on 2012 devices
- Added a Sin editor which is only capable of extracting data part from sin files for the moment.
- Added drivers for Xperia U, Sola, P
- Added Xperia U, Sola, P recognition (thanks to krabappel2548)
I had lost my mind and was a little bit before driveing crazy because there was no reason that i could found as reason because it dont work ...
Cross fingers that hopefully the newer version will work
@ChavitoArg
~# cat /etc/udev/rules.d/99-android.rules
SUBSYSTEM=="usb", ACTION=="add", SYSFS{idVendor}=="0fce", SYSFS{idProduct}=="6166", MODE="0777"
SUBSYSTEM=="usb", ACTION=="add", SYSFS{idVendor}=="0fce", SYSFS{idProduct}=="e166", MODE="0777"
Do you see any thing wrong? Or do you need the rules self?
30/005/2012 23:05:54 - INFO - <- This level is successfully initialized
30/005/2012 23:05:54 - INFO - Flashtool Version 0.8.0.0 built on 2012-05-27 18:20:39
30/005/2012 23:05:54 - INFO - You can drag and drop ftf files here to start flashing them
30/005/2012 23:05:57 - INFO - Device disconnected
30/006/2012 23:06:34 - INFO - Selected SK17i_4.0.2.A.0.62_Baseband+Kernel.ftf
30/006/2012 23:06:34 - INFO - Preparing files for flashing
30/006/2012 23:06:35 - INFO - Please connect your device into flashmode.
30/006/2012 23:06:55 - INFO - Device connected in flash mode
30/006/2012 23:06:55 - INFO - Opening device for R/W
30/006/2012 23:06:55 - INFO - Reading device information
30/006/2012 23:06:55 - INFO - Phone ready for flashmode operations.
30/006/2012 23:06:55 - INFO - Start Flashing
30/006/2012 23:06:55 - INFO - Flashing loader
30/006/2012 23:06:58 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
30/006/2012 23:06:58 - INFO - Flashing kernel.sin
30/007/2012 23:07:02 - INFO - Flashing fota1.sin
30/007/2012 23:07:03 - INFO - Flashing fota0.sin
30/007/2012 23:07:04 - INFO - Flashing adsp.sin
30/007/2012 23:07:08 - INFO - Flashing amss_fs.sin
30/007/2012 23:07:08 - INFO - Flashing amss.sin
30/007/2012 23:07:22 - INFO - Flashing apps_log.sin
30/007/2012 23:07:22 - INFO - Ending flash session
30/007/2012 23:07:22 - INFO - Flashing finished.
30/007/2012 23:07:22 - INFO - Please wait. Phone will reboot
30/007/2012 23:07:22 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
30/007/2012 23:07:22 - INFO - Device connected in flash mode
30/009/2012 23:09:02 - INFO - Device disconnected
Click to expand...
Click to collapse
My smartphone did not automaticly reboot. After a couple mins i did it manual, and it boot with my current / old android ...
When i select the Firmware to flash are there a couple *.sin files in the firmware content files? I selected all and hope that was correctly.
steavenX said:
My smartphone did not automaticly reboot. After a couple mins i did it manual, and it boot with my current / old android ...
When i select the Firmware to flash are there a couple *.sin files in the firmware content files? I selected all and hope that was correctly.
Click to expand...
Click to collapse
Phone is restarted to flashmode. Disconnect and power it up yourself.
The ftf file, that you used, was only kernel and baseband(no system, no data - no ROM itself), not the whole package. Download full ftf file and try again.
These .sin files are just shown, you don't have to choose anything there.
Sent from my Xperia Live using xda premium
I just want to let you know that it workd fine for me with flashtool v8 to root android gb. Now i try to get it working with ICS
Thanks for the help and sorry - i missed to drop a short note here.
Mostly i have some trouble because i have no native windows system - i love my linux system too much
With Flashtool Version 0.8.0.0 i am currently unable to flash a ST18i rootable kernel on my xperia mini pro. I hope v.9.5 will work *cross fingers*
flashsystem.X10FlashException: ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="IMAGE_ADDRESS_RANGE";ERR_DYNAMIC="SIN-block eraseblock mismatch";
at flashsystem.Command.send(Command.java:130)
at flashsystem.X10flash.uploadImage(X10flash.java:207)
at flashsystem.X10flash.sendImages(X10flash.java:275)
at flashsystem.X10flash.flashDevice(X10flash.java:334)
at gui.FlasherGUI$45.run(FlasherGUI.java:1094)
at foxtrot.AbstractWorkerThread$1.run(AbstractWorkerThread.java:40)
at java.security.AccessController.doPrivileged(Native Method)
at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:36)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:199)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:182)
at java.lang.Thread.run(Unknown Source)
flashsystem.X10FlashException: ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_STATIC="IMAGE_ADDRESS_RANGE";ERR_DYNAMIC="SIN-block eraseblock mismatch";
at flashsystem.X10flash.uploadImage(X10flash.java:217)
at flashsystem.X10flash.sendImages(X10flash.java:275)
at flashsystem.X10flash.flashDevice(X10flash.java:334)
at gui.FlasherGUI$45.run(FlasherGUI.java:1094)
at foxtrot.AbstractWorkerThread$1.run(AbstractWorkerThread.java:40)
at java.security.AccessController.doPrivileged(Native Method)
at foxtrot.AbstractWorkerThread.runTask(AbstractWorkerThread.java:36)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:199)
at foxtrot.workers.SingleWorkerThread.run(SingleWorkerThread.java:182)
at java.lang.Thread.run(Unknown Source)
Click to expand...
Click to collapse
steavenX said:
I just want to let you know that it workd fine for me with flashtool v8 to root android gb. Now i try to get it working with ICS
Thanks for the help and sorry - i missed to drop a short note here.
Mostly i have some trouble because i have no native windows system - i love my linux system too much
With Flashtool Version 0.8.0.0 i am currently unable to flash a ST18i rootable kernel on my xperia mini pro. I hope v.9.5 will work *cross fingers*
Click to expand...
Click to collapse
Maybe better root with that method, it should work. And some people reported, that their devices bricked while flashing neo kernel...
Just a final note ...
With the updated flashtool version it worked fine.
Now I'm using REMICS S3 ROM FOR XPERIA X10...after i flash it with FXP131
I want to flash a new rom with FXP133 but the PC cant recognize my device...
i try to install the driver for X10 but still the same...PLS HELP...
Umm reflash the rom and try again and make sure it installs the drivers correctly when flashing
Sent from my Xperia X10 using xda premium
mcsqwizzys98 said:
Umm reflash the rom and try again and make sure it installs the drivers correctly when flashing
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
yes i try before...
but becoz my PC doesnt recognize my phone so my flashtool didnt work also...
now even the USB storage cant turn on too...
It show me this...
23/057/2012 11:57:57 - INFO - <- This level is successfully initialized
23/057/2012 11:57:57 - INFO - Flashtool Version 0.9.0.0 built on 2012-07-19 22:57:15
23/057/2012 11:57:57 - INFO - You can drag and drop ftf files here to start flashing them
23/058/2012 11:58:03 - INFO - Device disconnected
23/058/2012 11:58:05 - INFO - Selected X10i_3.0.1.G.0.75_CUST-MY GENERIC 1237-0695.ftf
23/058/2012 11:58:05 - INFO - Preparing files for flashing
23/058/2012 11:58:25 - INFO - Please connect your device into flashmode.
23/058/2012 11:58:29 - INFO - Opening device for R/W
23/058/2012 11:58:30 - INFO - Start Flashing
23/058/2012 11:58:30 - INFO - Flashing loader
23/058/2012 11:58:30 - INFO - Ending flash session
23/058/2012 11:58:30 - ERROR -
23/058/2012 11:58:30 - ERROR - Error flashing. Aborted
23/058/2012 11:58:30 - ERROR - Drivers need to be installed for connected device.
23/058/2012 11:58:30 - ERROR - You can find them in the drivers folder of Flashtool.
23/059/2012 11:59:10 - INFO - Device disconnected
jjyap89 said:
It show me this...
23/057/2012 11:57:57 - INFO - <- This level is successfully initialized
23/057/2012 11:57:57 - INFO - Flashtool Version 0.9.0.0 built on 2012-07-19 22:57:15
23/057/2012 11:57:57 - INFO - You can drag and drop ftf files here to start flashing them
23/058/2012 11:58:03 - INFO - Device disconnected
23/058/2012 11:58:05 - INFO - Selected X10i_3.0.1.G.0.75_CUST-MY GENERIC 1237-0695.ftf
23/058/2012 11:58:05 - INFO - Preparing files for flashing
23/058/2012 11:58:25 - INFO - Please connect your device into flashmode.
23/058/2012 11:58:29 - INFO - Opening device for R/W
23/058/2012 11:58:30 - INFO - Start Flashing
23/058/2012 11:58:30 - INFO - Flashing loader
23/058/2012 11:58:30 - INFO - Ending flash session
23/058/2012 11:58:30 - ERROR -
23/058/2012 11:58:30 - ERROR - Error flashing. Aborted
23/058/2012 11:58:30 - ERROR - Drivers need to be installed for connected device.
23/058/2012 11:58:30 - ERROR - You can find them in the drivers folder of Flashtool.
23/059/2012 11:59:10 - INFO - Device disconnected
Click to expand...
Click to collapse
Go to flashtool folder there is a sub folder called flashtool drivers/drivers... install drivers from there and try again...
Sent from my Transformer TF101 using xda app-developers app
X10 SEMC Driver
jjyap89 said:
Now I'm using REMICS S3 ROM FOR XPERIA X10...after i flash it with FXP131
I want to flash a new rom with FXP133 but the PC cant recognize my device...
i try to install the driver for X10 but still the same...PLS HELP...
Click to expand...
Click to collapse
Hi..... Did you install pc companion and update service of x10?
If not Just install PC Companion and Update Service of X10. Then Flash again you phone .....
If you don't have that app... Just find and download from Google search:good:
OK ady...thank you all ur help...
i try to install gorden's gate flash Driver...then it work again...
My phone was already rooted using flashtool using 0.2.9.1 GB-ready and had unlocked bootloader. However on updating flashtool, the app tells me that my phone isn't rooted and doesn't have an unlocked bl as well. So I tried flashing it but every time I boot the device into flash mode the process stops and I get this error :
15/022/2012 19:22:13 - INFO - Please connect your device into flashmode.
15/022/2012 19:22:19 - INFO - Device connected in flash mode
15/022/2012 19:22:19 - INFO - Opening device for R/W
15/022/2012 19:22:19 - INFO - Reading device information
15/022/2012 19:22:19 - INFO - Phone ready for flashmode operations.
15/022/2012 19:22:19 - INFO - Start Flashing
15/022/2012 19:22:19 - INFO - Processing loader
15/022/2012 19:22:19 - INFO - Checking header
15/022/2012 19:22:19 - INFO - Ending flash session
15/022/2012 19:22:19 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Click to expand...
Click to collapse
Can anybody tell me the solution for this? I had xrecovery installed previously, I tried using SuperOneClick 2.3.3. Funny thing is that I can root my phone(shell root as well) and then start Flashtool 0.9.9 which will detect my phone as rooted(!).. but I can't install CWM recovery.. everytime I do so I get a process done message but if I go into Tools->Reboot->Recover->Specific Recovery all I get is a blank screen.
Now if I restart my phone after getting it rooted from superoneclick, it gets unrooted automatically! This is getting very confusing.. Can somebody help me please?
OP sorry, I have no answers, but I have the same/similar problem.
I figure if I add my information to the information you have provided we may collectively invite some comment to stair us in the direction to an answer.
OP, hope that's OK with you.
Just one thing OP, have you installed the Flashtool 0.9.9 Windows update/bug fix (assuming you're using windows)??
FlashTool-windows-0.9.9update1.zip
I am having all sorts of problems attempting to install a CM9/CM10 kernel with CWM recovery mode on my XPERIA X10i.
My end goal is to install [CM10] v4 (Torch) by: scritch007
I have an unlock??? bootloader and can root my phone. But I'm beginning to question that!!!
I have the following information provided from S1 Tool
Code:
Welcome to S1 tool.
RUNNING S1_EROM VER "R8A031"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1241-1846_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB537QU1MN
SEMC SIMLOCK CERTIFICATE
Elapsed:55 secs.
Using the service information menu *#*#7378423#*#* I was able to see my SIM lock was unlocked [] SIM = 0
I have installed a fresh copy of GB 2.3.3 using Flashtool 0.9.9 with additional Windows update1.
I used a 'World' GB 2.3.3 ftf see above.
I have also installed GB using Sony Ericsson Update Service (SEUS) which provides the same base OS.
[Root XPERIA X10i using FlashTool 0.9.9]
I have rooted the device using ZergRush exploit from Flashtools 0.9.9 with update patch FlashTool-windows-0.9.9update1.zip
To do this, I started the phone and enabled debug and unknown source.
With the phone still up and running and Flashtool 0.9.9 also running, I plugged in the USB cable.
I select the "My X10" option -> root -> Force ZergRush and the process then rooted the phone and the phone rebooted with root access, no problems there.
Code:
19/042/2012 11:42:06 - INFO - <- This level is successfully initialized
19/042/2012 11:42:06 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-21 23:15:59
19/042/2012 11:42:06 - INFO - You can drag and drop ftf files here to start flashing them
19/042/2012 11:42:12 - INFO - Device connected with USB debugging on
19/042/2012 11:42:12 - INFO - Connected device : X10
19/042/2012 11:42:12 - INFO - Installed version of busybox : BusyBox v1.15.3 (2010-02-06 17:13:19 CET) multi-call binary
19/042/2012 11:42:12 - INFO - Android version : 2.3.3 / kernel version : 2.6.29-modFXP-DooMKernel-v06 / Build number : 3.0.1.G.0.75
19/042/2012 11:42:12 - INFO - Root Access Allowed
I can also install CWM recovery this way too.
After I have gained root access I have the phone up and running and again plug the USB cable in.
I select recovery mode option in Flashtool 0.9.9 and I'm requested to power down my phone and reconnect.
This then installs a recovery mode, either CWM or xRecovery depending on which one I select.
Again, this is all good and I can boot into either xRecovery or CWM recovery depending on which is installed.
I have installed and used other versions of Flashtool, however the outcomes always seems to be the same.
If I attempt to install a CM9/CM10 ftf I get the following error message:
Code:
19/016/2012 03:16:36 - INFO - <- This level is successfully initialized
19/016/2012 03:16:36 - INFO - Flashtool Version 0.9.9.0 built on 2012-11-21 23:15:59
19/016/2012 03:16:36 - INFO - You can drag and drop ftf files here to start flashing them
19/016/2012 03:16:42 - INFO - Device disconnected
19/016/2012 03:16:55 - INFO - Selected X10_4.1.X_CMX10_bootmanager_v14.ftf
19/016/2012 03:16:55 - INFO - Preparing files for flashing
19/016/2012 03:16:56 - INFO - Please connect your device into flashmode.
19/017/2012 03:17:45 - INFO - Device connected in flash mode
19/017/2012 03:17:46 - INFO - Opening device for R/W
19/017/2012 03:17:46 - INFO - Reading device information
19/017/2012 03:17:46 - INFO - Phone ready for flashmode operations.
19/017/2012 03:17:46 - INFO - Start Flashing
19/017/2012 03:17:46 - INFO - Processing loader
19/017/2012 03:17:46 - INFO - Checking header
19/017/2012 03:17:46 - INFO - Ending flash session
19/017/2012 03:17:46 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
19/017/2012 03:17:46 - ERROR - Error flashing. Aborted
19/017/2012 03:17:46 - INFO - Device connected in flash mode
19/017/2012 03:17:47 - INFO - Device disconnected
19/017/2012 03:17:49 - INFO - Device connected in flash mode
19/018/2012 03:18:10 - INFO - Device disconnected
19/018/2012 03:18:13 - INFO - Device connected with USB debugging off
19/018/2012 03:18:13 - INFO - For 2011 devices line, be sure you are not in MTP mode
19/018/2012 03:18:23 - INFO - Device disconnected
At the moment I have just given up until I have some good leads to renew my CM9/CM10 install efforts.
At the moment I have GB 2.3.3 rooted with ZergRush exploit.
xRecovery installed
DooMLoRD DooMkernel V6 install with overclocked CPU of 1152MHz
The phone is up and running, rooted and has a modified Kernel which I recovered via xRecovery backup restore.
So, I have a working GB 2.3.3 phone with root access....but I want more...
My phone seems to be a one trick pony and I don't seem to be able to install CM9/CM10 with the information I have to hand.
Any thoughts I why I'd be getting the "SIN header verification failed" message????
********* Update **************
[ANSWER]
I solved my problem by unlocking the bootloader on my XPERIA X10i using the following information.
Tutorial: Rooting, Bootloader unlocking&updating
Remember to have debugging and Unknown source ticked on your XPERIA X10i phone.
Code:
20/015/2012 16:15:44 - INFO - Device connected with USB debugging off
20/015/2012 16:15:44 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/015/2012 16:15:44 - INFO - Device connected with USB debugging on
20/015/2012 16:15:45 - INFO - Connected device : X10
20/015/2012 16:15:45 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
20/015/2012 16:15:45 - INFO - Android version : 2.3.3 / kernel version : 2.6.29-00054-g5f01537
20/015/2012 16:15:46 - INFO - Remounting system read-write
20/015/2012 16:15:46 - INFO - Installing toolbox to device...
20/015/2012 16:15:46 - INFO - Pushing C:\Program Files\Flashtools 0.8.6\Flashtool\custom\root\ftkit.tar to /data/local/tmp
20/015/2012 16:15:46 - INFO - Running installftkit as root thru sysrun
20/015/2012 16:15:47 - INFO - Root Access Allowed
20/016/2012 16:16:22 - INFO - Please connect your device into flashmode.
20/016/2012 16:16:27 - INFO - Device disconnected
20/017/2012 16:17:22 - INFO - Device connected in flash mode
20/017/2012 16:17:22 - INFO - Opening device for R/W
20/017/2012 16:17:22 - INFO - Reading device information
20/017/2012 16:17:22 - INFO - Phone ready for flashmode operations.
20/017/2012 16:17:22 - INFO - Flashing loader
[COLOR="Red"]20/017/2012 16:17:24 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE[/COLOR]
20/017/2012 16:17:24 - INFO - Start Reading property
20/017/2012 16:17:24 - INFO - Reading TA finished.
20/017/2012 16:17:24 - INFO - Ending flash session
20/017/2012 16:17:24 - INFO - Found semcSL
20/017/2012 16:17:24 - INFO - You can now unplug and turn on device, then plug it again
20/017/2012 16:17:24 - INFO - Waiting for device
20/019/2012 16:19:39 - INFO - Device connected with USB debugging on
20/019/2012 16:19:40 - INFO - Pushing C:\Program Files\Flashtools 0.8.6\Flashtool\custom\features\UnlockBL\files\qsd8250\qsd8250bootwrite_semcSL to /data/local/tmp
20/019/2012 16:19:40 - INFO - Pushing C:\Program Files\Flashtools 0.8.6\Flashtool\custom\features\UnlockBL\files\qsd8250\mapper_2.6.29-00054-g5f01537.ko to /data/local/tmp
20/019/2012 16:19:40 - INFO - Pushing C:\Program Files\Flashtools 0.8.6\Flashtool\custom\features\UnlockBL\files\qsd8250\fixPart to /data/local/tmp
20/019/2012 16:19:40 - INFO - Running runfixPart as root thru sysrun
20/019/2012 16:19:41 - INFO - Successfully applied fixPart. Rebooting
20/019/2012 16:19:41 - INFO - Waiting for device
20/019/2012 16:19:42 - INFO - Device disconnected
20/019/2012 16:19:53 - INFO - Device connected with USB debugging off
20/019/2012 16:19:53 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/019/2012 16:19:57 - INFO - Device connected with USB debugging on
20/020/2012 16:20:10 - INFO - Running runbootwrite as root thru sysrun
20/020/2012 16:20:11 - INFO - Successfully applied unlock. Rebooting
20/020/2012 16:20:11 - INFO - Running runClean as root thru sysrun
20/020/2012 16:20:13 - INFO - Device disconnected
20/020/2012 16:20:24 - INFO - Device connected with USB debugging off
20/020/2012 16:20:24 - INFO - For 2011 devices line, be sure you are not in MTP mode
20/020/2012 16:20:33 - INFO - Device disconnected
20/020/2012 16:20:36 - INFO - Device connected with USB debugging on
20/020/2012 16:20:36 - INFO - Connected device : X10
20/020/2012 16:20:36 - INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
20/020/2012 16:20:36 - INFO - Android version : 2.3.3 / kernel version : 2.6.29-00054-g5f01537
20/020/2012 16:20:48 - INFO - Root Access Allowed
20/023/2012 16:23:12 - INFO - Device disconnected
20/024/2012 16:24:10 - INFO - Log written to C:\Program Files\Flashtools 0.8.6\Flashtool\flashtool_2012-12-19_04-10-47.log
Don't 'freak out' when you see "Bootloader status : UNROOTABLE" scroll across the screen. My heart sunk when I saw that, but I let the first phase of the process complete and then connect the phone to the USB cable after the phone had re-booted with Flashtool 0.8.6 (in my case) still running and the process completed. In my case I got my phone back unlocked and still rooted. All good.
I'm pretty sure my bootloader was not locked when I started out a year or so ago, but I can't be absolutely sure; so somehow it's seems to have become locked during that time. Maybe because I was just recovering the same build each time I never installed anything else to check.
Like the OP, I originally rooted my phone by using 0.2.9.1 GB-ready using a convoluted process compared to todays one click root process.
Now when I flash a ftf file in Flashtool it runs through without any errors.
I was then able to go on and install [CM10] v4 (Torch) by: scritch007 without any problems.
Hope some of this information can help others.
My downloaded Flashtool has a virus. So I use the 0.9.0.0 version and it works ok.
I had the same issue too with v 0.9.9.0. for rooting I use v 0.6.8.0