iv been having a few issues as of late with my s2 so decided id just backup my numbers and media and wipe and start again, but when i do a factory reset, it shows an error mounting the sdcard/.android_secure
and then it skips it, can anyone tell me how to fix this problem so i can start a fresh with a nice clean and empty galaxy
What system do you have? ics or ginbread...?
Question = wrong forum.
....................................
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
my apologies, i havent used the forum much as the phone has been fine for about 6 months, its now on checkroms v6 which i managed to flash onto it with a bit of fiddling, thinking that may solve some of my issues but it didnt. thats when i noticed this error when doing a few resets.
JJEgan, gonna follow your steps now buddy, thanks and fingers crossed
its a no go, it wont let me format or mount the sdcard
try factory reset from phone menu,
try another kernel to get another version of CWM, eg: Siyah
hiya zac, well i have the phone in download mode connected to odin, im using the link in your sig, and downloading the stock firmare and kernal, will it matter if i didnt wipe the sdcard before flashing these two items with odin? surely i can do it after?
upto you to try.....
cant guarantee since dont know what weird problem has got with your SD card which
dont allow you to wipe,
you can also try flashing another custom kernel first,
When you flash a stock firmware it already contains a Kernel, no need to flash seperately..
any chance to a quick link to a kernal to try and a guide!
its been a while since iv done this! haha
which rom are you currently on?? ICS or GB
checkrom v6 i do believe
GB CWM flash : http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14-CWM.zip
Checkrom is GB version,
but makesure, from settings/about phone
i will bud, and i flash that kernal, with odin?
no this is CWM flashable, put on SDcard, and flash from CWM,
top man, off to have a go now
if CWM flash fails, you can try from ODIN
ODIN flash :http://gokhanmoral.desean.net/siyahkernel/v2.6/Siyah-v2.6.14.tar
select the file from PDA of Odin,
Pugme said:
its a no go, it wont let me format or mount the sdcard
Click to expand...
Click to collapse
Unless you have a external sdcard, this problem is self explanatory!
Related
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Thx I will try it soon. But how come I can flash ics kp8 and lp2 roms
Are you using the new bootloader then?
That one Im not sure of but I have read on other threads that people have had to "repartition" their phones to be able to flash back from ICS.Not bieng on ICS I dont see why you cant as the Omega ROM was just themed.Im on the latest Omega and its 2.3.6. so 100% positive it wasnt ICS.Also Try stupid things like another com port.Happened to me once.The one I was using when I had an i9000 stopped letting me flash it via Odin when it reached the same stage every time I tried.Dont Know why.Just had to change ports.Try everything:
1.Full wipe and flash.....If that dont work then...
2.Flash F/W that works then change kernel and flash old bootloader(as mentioned above)never know,might work.
http://www.multiupload.com/LQQBRQVJUD
Flash it in PDA in Odin.
ALso you could try a program called "Fus Downloader"
http://fus.nanzen.se/
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
KevandLynds said:
when i had problems with odin failing i changed the usb cable and it worked a treat. wouldnt work at all with a cheap unofficial cable
Click to expand...
Click to collapse
True.Same thing happened to my mate.He has an i9000 and Odin stopped flashing his phone but only if he used a PIT file so I gave him my i9100 cable and it started flashing his phone again with PIT file selected.Weird how things work sometimes for no real reason.Anyway Nandroid backups are always a good call.could have saved some trouble the this case.Ive got a Nandroid backup on my phone and copied to DropBox thats months old but it would get me out of trouble if this sort of thing happened to me Even though its old as.Gotta have that saftey net.
zabihjan said:
BEFORE anyone mention that this problem has been mentioned before, read twice.
i was on omega rom, it kept rebooting. so i cleared cache and all that stuff. shut down the phone, booted in download mode. tried flashing my stock firmware KK3, it goes up to flashing kernel then fails.
when i turn the phone off and on i get the a different screen saying firmware upgrade failed try restoring via kies.
i tried lp2 firmware it flashes fine. could it be that i was using ICS before and now it doesnt let me go back to 2.3.6
pls respond with solutions
Click to expand...
Click to collapse
Try flashing a Gignerbread bootloader using Odin
happel92 said:
Try flashing a Gignerbread bootloader using Odin
Click to expand...
Click to collapse
I will try it soon thx
Sent from my GT-I9100 using Tapatalk
JJEgan said:
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
Tried dont work i can only flash ics roms
Sent from my GT-I9100 using Tapatalk
pulser_g2 said:
Are you using the new bootloader then?
Click to expand...
Click to collapse
Old bootloader as i can use my jig to clear counts
Sent from my GT-I9100 using Tapatalk
cooza said:
Omega has ICS themed ROMs but no ICS firmware ROMs so it wont be cos of that.Did you try a full system wipe before the flash??
boot to recovery and wipe cache partition.Then go to "mounts and storage" and format System/Data/Cache and then do a factory reset then reboot.The Phone probably wont go past the Galaxy-S logo so pull the battery then put it back in and boot to download mode and try the flash again.If that doesnt work you could try to flash the F/W that works and then flash a new kernel.After that try the 2.3.6 flash again.
Click to expand...
Click to collapse
Didnt work
Sent from my GT-I9100 using Tapatalk
Mate,thats a strange one alright.
Any luck yet.I was thinking that you might have to look for a package that has the older 4 file flash with pit.Its possible that maybe you need to repartition your device.Might be hard to find thought.
Hey guys!!!
New galaxy S2 owner. I have done some searching in these forums and the threads answered many of my questions. However, I still have some newbie questions that I found unanswered. Please excuse me if my questions have been answered before but I got tired of searching
Here is the deal:
Yesterday, I flashed a CF Root with Odin3. Then used CWM to flash a wanamlite firmware. The firmware was great but I didn't like that it still had TW. So I dl'ed another firmware to the internal SD card and flashed again using CWM. I then flashed a couple of other ROMS and I noticed that after the first wanamlite flash, the new ROMs were unstable with many error messages that some OS processes have stopped etc.
I got back home, flashed to stock with Odin3 and the phone got stuck at the second samsung logo. I followed some community steps (thanks XDA) like disabling all kies processes from TM, wiping data/cache, then boot in DL mode and flash the stock ROM using Odin3 which worked.
I then Flashed a CF Root again and used CWM to flash a Spike Pure ICS ROM v5 which was great but I get occasional error messages like 'gallery stopped' or some other error message when I try to set contact photos. It just lags, blackscreen then comes back with the 'Unfortunately, the process had stopped'.
My questions: is this because of the previously flashed firmware that this is happening or is it that those ICS ROMs have these issues commonly? Did anyone have this experience before? What do you advice before flashing to a new ROM going back to stock or going straight from the current? Doesn't Odin3 technically wipe everything back to stock?
WIPE WIPE WIPE.
Go into recovery. Data/factory reset.
Advanced, Wipe dalvic cache. Mounts and storage, format system. Its a standard procedure going from one OS to another OS. You can then either flash a firmware zip from recovery or an .tar file from Odin.
Then to be on the safe side factory reset once again.
Sent from my GT-I9100 using Tapatalk 2
Wich fw do you have?
Make a deep clean with odin an flash on the latest ics version (lp9 is a good one)..then flash (if you want) a custom rom..
My experience with custom roms: one of the best rom samsung based (ics 4.0.3) is the foxhound greyfox v2..if you want a pure ics rom flash the omega aokp rom (ics 4.0.4)..
Try then to change kernel..siyah is the best for both roms..
P.s. sorry for my bad english
Sent from my GT-I9100 using Tapatalk 2
After LP7 should be staple enough for daily use .However you are using custom roms and you should read carefully each roms thread before flashing .
You are probably suffering from flashing multiple roms and leaving bits behind as well = clean wipe .
jje.
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
I currently have Spike Pure ICS v 5.
What do you mean by Odin3 'deep clean'?
OJ77 said:
Can someone give me a clear full wipe procedure? I always wiped data/factory rest/wiuped chaceh and dalvik... but what else? a step by step procedure would be helpful!!
Click to expand...
Click to collapse
Read my last post..
Sent from my GT-I9100 using Tapatalk 2
so:
1. Recovery mode > format user data > wipe cache > clear dalvik > format system (from moutns and storage)
2. Download mode > flash stock ROM using odin 3
Did I get it right? Was there something i didn't wipe?
Before you flash a new rom, make sure you answer the requirements.Some ICS roms need to be flashed in specific way.
The way of doing a full wipe is you go in Clockwork mode, wipe data/factory reset, you wipe cache partition, then go to advanced wipe Dalvik and Battery stats, then go in mounts and storage ( i think ) and you wipe the cache from there, but nothing else in mounts and storage.If you wipe anything else there's a high percent of bricking your phone.If this doesnt help you, I doubt that anyone could give you any clearer instructions.
Good luck.
DONT FORMAT SYSTEM.
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Followed by root and custom rom if you so wish .
jje
OK im confused now... do I format system directory in mounts and storage or no?
OJ77 said:
OK im confused now... do I format system directory in mounts and storage or no?
Click to expand...
Click to collapse
i always do personally.
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card.. I get errors and 'installation aborted' if i try to do it from CWM... does that mean formatting those 3 means Odin3 is the only way? Cus I'm not home and I don't have odin3 on me.... LOL!
OJ77 said:
I got tempted and formatted system/cache/data but now i cannot flash from my internal sd card..
Did you format sd card and totally wipe the lot = nothing on the phone .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
At this point you have no OS on the phone nor kernel rooted nor CWM .
Hence
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
skimminstones said:
JJ, you really need to learn how to quote you know, makes your posts so confusing to read sometimes
Click to expand...
Click to collapse
Agree must try better .
Habit from replying to emails i guess .
jje
Thanks...
I did a 'full wipe' by doing t his:
1. Boot into CWM: wipe data, wipe cache, wipe dalvik, wipe battery stats, wipe system/data/cache from mounts.
2. Reboot into DL mode, flash stock ROM using Odin3.
3. Repeat step 1
4. flashed spike ICS v 7.3 using CWM. Stable so far.
Thank you!
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
budi.hermawan said:
imho: the most stable ics release is the stock official, but with some.battery issues, my suggestion: stay on gingerbread, find a custom kernel to suits your need,
GT-I9100, official 2.3.6, hardcore's Speedmod
Click to expand...
Click to collapse
I agree! I don't like ICS because is still unstable! My battery lasts very short with ICS and the phone overheats.
Moreover I hate the browser! I mean, The Galax S2 with GB still has the smoother browser of all the smartphones out there, and Samsung with ICS update messed it up! Now is laggy with micro stutters! Don't understand why!
OJ77 said:
The firmware was great but I didn't like that it still had TW.
Click to expand...
Click to collapse
You didn't need to go through all that trouble just because you didn't want TW (which I also hate, btw).
You could simply have installed another launcher (such as Go Launcher EX, ADW, etc) from Play Store and, since you were already rooted, uninstalled TW using Titanium Backup afterwards. It has to be in that sequence (install new then uninstall old).
this way you can have whatever ROM + kernel combination you like, and still use whatever launcher you prefer.
Hey guys this is my first time messing with custom roms and my biggest fear has come true i think i bricked my phone, at least soft brick.
here is what happened:
I decided to flash supernexus 5 rom and everything went well, however my wifi wasnt working i tried to do a nandroid recover from a nandroid backup that i had from a while back made with the same version of cmw but it i got the message "no files found" even when i had put the folder with the recovery in my internal storage in the cmw folder. I decided to do a factory reset, wipe cache and dalvik cache but this didn't solve my problem with cmw not detecting the files then i went on and did this i went to mounts and storage as i read on a thread that mounting and unmounting everything solved the problem for a guy but this did not help either, then i went to mounts and storage and formated cache, data and system as shown in this youtube video http://www.youtube.com/watch?v=ZCoI62PG7jE&feature=g-hist after that i tried to rebot the phone but it wont get pass the inicial galaxy s3 i9300 screen, i tried whipe data cache and factory reset again but i still can't make it boot ,I can get to recovery however it still doesn't see the folder that i have there. If i connect the phone to the pc it says installing drivers for the device but it fails and i can't see the phone anymore as connected.
Please help me you have no idea how much i saved for buying this and i don't want to loose it.
this is the version of cmw that im using CF-SGS3-CWM-v5.5-v1.5
Krep3 said:
Hey guys this is my first time messing with custom roms and my biggest fear has come true i think i bricked my phone, at least soft brick.
here is what happened:
I decided to flash supernexus 5 rom and everything went well, however my wifi wasnt working i tried to do a nandroid recover from a nandroid backup that i had from a while back made with the same version of cmw but it i got the message "no files found" even when i had put the folder with the recovery in my internal storage in the cmw folder. I decided to do a factory reset, wipe cache and dalvik cache but this didn't solve my problem with cmw not detecting the files then i went on and did this i went to mounts and storage as i read on a thread that mounting and unmounting everything solved the problem for a guy but this did not help either, then i went to mounts and storage and formated cache, data and system as shown in this youtube video http://www.youtube.com/watch?v=ZCoI62PG7jE&feature=g-hist after that i tried to rebot the phone but it wont get pass the inicial galaxy s3 i9300 screen I can get to recovery however it still doesn't see the folder that i have there. If i connect the phone to the pc it says installing drivers for the device but it fails and i can't see the phone anymore as connected.
Please help me you have no idea how much i saved for buying this and i don't want to loose it.
Click to expand...
Click to collapse
You formatted system so you have no os to boot! Flash stock Rom with Odin.
Nb.......if you are using cm10/aosp you need to flash an ics Rom, let it boot, and enable wifi before then going on to flash the Rom as wifi won't work coming direct from jb Rom
slaphead20 said:
You formatted system so you have no os to boot! Flash stock Rom with Odin.
Nb.......if you are using cm10/aosp you need to flash an ics Rom, let it boot, and enable wifi before then going on to flash the Rom as wifi won't work coming direct from jb Rom
Click to expand...
Click to collapse
:laugh: THANKS SO MUCH you are the best, i was freaking out is almost 4am here and i couldn't sleep, you're a life saver.
Any idea why cmw doesn't see the restore files on the internal sd card
Krep3 said:
:laugh: THANKS SO MUCH you are the best, i was freaking out is almost 4am here and i couldn't sleep, you're a life saver.
Any idea why cmw doesn't see the restore files on the internal sd card
Click to expand...
Click to collapse
did you move the entire folder to your internal sd?
slaphead20 said:
did you move the entire folder to your internal sd?
Click to expand...
Click to collapse
yes everithing, and put it in the cmw folder
Krep3 said:
yes everithing, and put it in the cmw folder
Click to expand...
Click to collapse
can you remember if the backup was created with a different version of cwm to that which you are trying to restore it from?
slaphead20 said:
can you remember if the backup was created with a different version of cwm to that which you are trying to restore it from?
Click to expand...
Click to collapse
yes it was the same version only thing is that when i made it i have rooted with cf-root 6.4, but after flashing the stock elk4 leak i used cf auto root and then installed the recovery on its own but is the same version.
Krep3 said:
yes it was the same version only thing is that when i made it i have rooted with cf-root 6.4, but after flashing the stock elk4 leak i used cf auto root and then installed the recovery on its own but is the same version.
Click to expand...
Click to collapse
hmmmm......not sure what the problem is then, only thing I can suggest is flash the cf root again(not the auto one) and see if that sorts it, but I would move that backup back to its original location first
thanks again!! i will try flashing it again.
Krep3 said:
thanks again!! i will try flashing it again.
Click to expand...
Click to collapse
It's just a shot in the dark, but it's the direction I would head in if it happened to me......or I would just abandon the backup and start afresh !
Hi guys.
My phone is a international i9300
I've been searching for a problem like mine in the forum for three weeks now and I couldn't find a proper solution.
I just can't flash any rom via CWM anymore...
I can flash roms via ODIN, but when it comes to CWM, it gets stucked at Samsung logo after the install.
I tried:
Wipe cache / Dalvik / factory reset.
before the installation, after the installation, every combination possible.
Tried megawipe and no help.
Changed the kernel, Siyah, Googy, stock...
Changed versions of CWM, touch.
I have now the Phil'z 5.0.15.
I like very much the XXELK4 version from roalex with its MOD, for the call recording and full multiwindow support, but can't flash it anymore, nor any other custom or stock via CWM.
By now I can only have a full stock flashed via odin, or my Omega 46.1, wich I have a full backup.
Another solution could be find a .tar rooted and with the MODS flashable via Odin, but I really wanted to understand what's happening with my recovery.
Thank you all and congrats for the great work with the forum.
In cwm format..
Data
System
Cache
Then go to advanced and wipe dalvik cache
Then flash the rom.
Your cwm is upto date?
andrewwright said:
In cwm format..
Data
System
Cache
Then go to advanced and wipe dalvik cache
Then flash the rom.
Your cwm is upto date?
Click to expand...
Click to collapse
Sorry.
Forgot to include in the original post... I tried that too. Formatted everything
Got the 6.0.6.3
I also tried with the last Philz recovery.
And with previous versions of both too.
Have you tried to go bk to stock,root that firmware then install cwm then flash custom rom? Clean slate start.
Your problem may be a bad file download .
andrewwright said:
Have you tried to go bk to stock,root that firmware then install cwm then flash custom rom? Clean slate start.
Click to expand...
Click to collapse
Yes... didn't work...
JJEgan said:
Your problem may be a bad file download .
Click to expand...
Click to collapse
I'll try to download again, although it's not likely that several files are bad. I tried with so many different roms...
I bought another micro sd of 64gb. Maybe the one I'm using is ruining the files...
There can't be a so huge bug in philz recovery
Try install from internal sdcard, a simple 'Factory Reset before New Rom' no need to mega wipe anything.
Striatum_bdr said:
There can't be a so huge bug in philz recovery
Try install from internal sdcard, a simple 'Factory Reset before New Rom' no need to mega wipe anything.
Click to expand...
Click to collapse
Of course. And I tried with different versions of Philz' and also CWM. It can't be a bug in recovery.
Re-downloaded the revolution 29.0 and the Roalex XXELK4 rooted, copyed directly to internal and flashed... Same problem. Stuck at Samsung logo in boot. I'm begining to think my phone is screwed up. But this is so strange. I can restore my backup with no problems, and also can flash with Odin.
Is there a way to flash a .ZIP ROM in Odin?
Does not make any sense .
What model phone do you have ???
What model firmware are you flashing .
What about basic stock custom roms flashed via CWM ??
Have you booted to Philz recovery mounts and storage format sd card cache system and data then flash rom ??
Agree it is strange Deviating a little from your problem but have you tried flashing anything with TWRP recovery see if the problem persists with that.
JJEgan said:
Does not make any sense .
What model phone do you have ???
What model firmware are you flashing .
What about basic stock custom roms flashed via CWM ??
Have you booted to Philz recovery mounts and storage format sd card cache system and data then flash rom ??
Click to expand...
Click to collapse
I know it doesn't. That's why I'm going crazy.
I uploaded the screenshots with my system specs.
The model is correct, international i9300. Tried to download from the site and also directly from rommanager.
The firmwares I'm trying to flash are stock, but rooted by Roalex. I couldn't find a pure stock .zip for testing with CWM. The firmware I'm using is UBEMH5 from sammobile, wich I flashed via Odin.
Yes... Tried and formatted everything, several times, mounted, unmounted, every possible order...
Almost giving up. :crying:
tallman43 said:
Agree it is strange Deviating a little from your problem but have you tried flashing anything with TWRP recovery see if the problem persists with that.
Click to expand...
Click to collapse
I never used TWRP. Can I flash the same ROM file .zip with it or it requires it's own rom file type?
I'm gonna be out of the country for two days. When I come back I'll give it a try.
Thank you all so far.
ivansaab said:
I never used TWRP. Can I flash the same ROM file .zip with it or it requires it's own rom file type?
I'm gonna be out of the country for two days. When I come back I'll give it a try.
Thank you all so far.
Click to expand...
Click to collapse
It's been a while since i used it last time was when I had a S2 and I used it all the time:good: You can flash any rom with it that cwm can flash (as far as I know) but it had a little trouble restoring backups made with cwm but I think that got fixed.But you can make backups and loads of other things with it I recommend people to try it at least once This won't fix your cwm problem but would be interesting to see if it works
If twrp doesn't work on stock Flash googy Max dualboot kernel and keep stock as primary rom and custom as second rom. Then you have best of both world's :thumbup: also take the pic down with your emei showing :banghead: never ever show this!
What i would do in this situation is .
In recovery format cache system sd card preload .
Flash stock rom via Odin.
Check phone works ok .
Then root / flash philz recovery .
Put custom rom on sd card boot to recovery factory reset .
Then install custom rom watching setup to spot a failure point .
Wait for rom to load 10 mins fails then remove batter replace and factory reset .
Problem solved
Hi folks.
Think I figured out what's going on.
Via TWRP it says the files were corrupted, although the file sizes were identical.
I MD5 checked the files in my computer and they're ok, but when checked already inside my phone or SD they're not.
Instead of copying the files via USB cable I removed the SD card and inserted directly in my laptop slot and copyed the files. MD5 checked and they're ok...
After I tryed again copy via USB and the files were corrupted again.
I think my desktop USB or maybe the Samsung drivers are doing that.
Well, problem solved. I hope this helps other people in future problems.
Thank you all for your help and support. Keep on with the great work.
Mark solved then for other users .