Unable to do factory reset!!! HELP!!! - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hi all,
I'm trying to root but having problem. Then I decided to restore to factory reset via software and thru CWR but both failed....any suggestion?
Best Regards,
Jay

Sorry if I'm hijacking this thread, I am also having a similar problem. My tab has been rooted since I bought it, nearly a year ago. I have flashed loads of different roms and builds without any problem. Recently with the AOKP builds, my tab locks up randomly and I have to do a reboot by holding power for 15 secs. I can install a new rom etc, but it does not fix the issue.
I have since decided to do a factory reset, however in cwm when I choose this option it hangs and freezes the device...
I've tried the superwipe scripts, but because they are not for this device they do not work.
Any help would be greatly appreciated!

jaytee84 said:
Hi all,
I'm trying to root but having problem. Then I decided to restore to factory reset via software and thru CWR but both failed....any suggestion?
Best Regards,
Jay
Click to expand...
Click to collapse
What exactly fails? The factory reset in CWM won't format the SDcard partition, btw. Only stock recovery does that.
I would suggest to flash a stock system using odin (http://forum.xda-developers.com/showthread.php?t=1651794). That'll revert the system and recovery to stock and you can do a factory reset.

I have fixed my problem, I don't know if it will help the OP. But here is what I did.
Downloaded ODIN plus the stock 3.2 honeycome odin file for my model p7500 (Unzip it too ). booted my tab holding power and vol down. Once the samsung logo comes up, release power.
Press Vol UP to select "Download Mode". Open ODIN, connect usb cable pc --> tablet and press volume up on tab again, to confirm download mode.
ODIN will recognize the tab, select the file you just unzipped, and click start... once finished you should be back to stock, so you can re-root. Like I had too
Now I just hope that my device is fixed and wont freeze anymore

Localhorst86 said:
What exactly fails? The factory reset in CWM won't format the SDcard partition, btw. Only stock recovery does that.
I would suggest to flash a stock system using odin (http://forum.xda-developers.com/showthread.php?t=1651794). That'll revert the system and recovery to stock and you can do a factory reset.
Click to expand...
Click to collapse
CWM wont work...I tried rooting but it said "E:/ can't be mounted"
welshboy09 said:
I have fixed my problem, I don't know if it will help the OP. But here is what I did.
Downloaded ODIN plus the stock 3.2 honeycome odin file for my model p7500 (Unzip it too ). booted my tab holding power and vol down. Once the samsung logo comes up, release power.
Press Vol UP to select "Download Mode". Open ODIN, connect usb cable pc --> tablet and press volume up on tab again, to confirm download mode.
ODIN will recognize the tab, select the file you just unzipped, and click start... once finished you should be back to stock, so you can re-root. Like I had too
Now I just hope that my device is fixed and wont freeze anymore
Click to expand...
Click to collapse
I will try these method and see if it work! Thanks all!!

Fail....maybe because i encrypted my tablet? Anyone can help decrypt??

Ok i've tried everything and it wont...even decrypt wont work...any suggestions??? My tablet is just paper weight. I cant even sell it cus data cant be wiped.

jaytee84 said:
Ok i've tried everything and it wont...even decrypt wont work...any suggestions??? My tablet is just paper weight. I cant even sell it cus data cant be wiped.
Click to expand...
Click to collapse
Put the tab in download mode and Odin the stock tar.

+1. You will lose everything on your internal storage by the way, but its the best way to wipe any bad data or damage that has been done short of a hard brick.
Its quite refreshing actually I'm glad I did mine and it proved I didn't need half the junk that was on it lol!

@jaytee84: please tell your device's model my friend,and tell which firmware you are currently running

Related

[Q] Problems with factory reset...

Hi guys:
So I have made so mistakes with this phone. When I got it I thought it was a Samsung Galaxy S 4G...
1. Rooted it using SuperOnClickRoot
2. Almost bricked it triyng to install a CFW done for SGS4G.
Then I realized that it was not a SGS4G and came here looking for some information...
I did that: Return to stock JFD (2.1) using that guide:
http://rootzwiki.com/showthread.php?t=702&p=11409&viewfull=1
And now I am a little more happier because the phone turns on, now the recovery works... But... When it get turn on it boot loop endlessly.
I tried so many times to do the same thing and I don't have a chance to get it fixed. Tried to move an update.zip to the external sd card without luck, I was triying to install ClockworkRecoveryMod.
So now I come here... The phone is boot looping and when Its turning on a lot of line with colors appear...
I know this have solution, just I want to know how to approach it.
Thanks for reading!
Redo the flash back to stock But this time 1st go into recovery and delete the cache then go into the advanced and delete the dalvik.
Then shutdown the phone and re open but this time you want to be in download mode (hold down the volume down only (or could just be the up only)) and on button at the same time to get you there.
Then hook up the phone to your comp after you have Odin up and then reflash stock
Then root> then flash whatever you want from there
good luck
oka1 said:
Redo the flash back to stock But this time 1st go into recovery and delete the cache then go into the advanced and delete the dalvik.
Then shutdown the phone and re open but this time you want to be in download mode (hold down the volume down only (or could just be the up only)) and on button at the same time to get you there.
Then hook up the phone to your comp after you have Odin up and then reflash stock
Then root> then flash whatever you want from there
good luck
Click to expand...
Click to collapse
I just have stock recovery... I don't have Advance button...
I have done it in Download Mode, then connected to Odin (PC), box turn yellow saying COM4 and then selected PDA and PIT file in the guide and hit START.
Everything seems to run fine on ODIN and finalize saying PASS but the phone continue doing the problems I have said in my first post.

[Q] i9300 keep rebooting and never turn on

Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
I can wipe cache and partition but nothing change, it keeps rebooting.
I cant use odin because odin didn't see the phone,
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
I am looking for possibilities and solution for 2 days and I cant find any. Please help me.
bootloop
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
anshulmalviya said:
It seems you are stuck in a boot loop. Try clearing the cache & perform a full factory wipe. Then reboot your device.
Hope that helps.
Click to expand...
Click to collapse
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
atilim said:
Hi everyone.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
I cant use odin because odin didn't see the phone,
>>> Thats either PC or Drivers usually see basic faqs .
I think USB debugging wasn't on. But I cant find a way to open it without turning on.
>>> Totally irrelevant .
Click to expand...
Click to collapse
You are right, it was computer malfunction. I can use odin now.
I have a i9300 and it is stuck in rebooting.
Power key is ok.
I can get it to download mode or recovery mode.
>> in recovery mounts and storage FORMAT system data cache sdcard .
Boot to download mode flash stock firmware via Odin .
Click to expand...
Click to collapse
I both try 4.1.2 (with odin) and 4.3 (with octopus) but it keeps rebooting.
I also use octopus box to flash and repair efs.
atilim said:
thanks for answer. But I try that several times. Nothing changes.
Also I try partition wipe too. Sometimes I can see Samsung logo but I cant go further.
Click to expand...
Click to collapse
If you've cleared the partition structure then you've turned a possible soft brick into a hard brick, you'll need a new motherboard now.
Try flashing the rescue firmware, from the thread in general, but I wouldn't hold out any hope.
Sent from my GT-I9300 using Tapatalk
same problem but worse please help
HI guys i have exactly the same problem but my bootloop was caused by installing recovery through the cwm app and then rebooting to recovery through the app. i rebooted to recovery with an app before and it caused this aswell ...however back then my volume down button was working. i fixed it last time by going into download mode and flashing philz recovery however i cant enter download mode or recovery or boot into system.
PS: my phone doesnt boot into recovery it comes up with the samsung galaxy s3 gt 19300 logo then it comes up with the cwm recovery icon in the middle of my screen and 'clockwordmod recovery v6.0.6.4' at the bottom of the screen then restarts itself.
i dont know what to try i have looked around, didnt want to create a new thread just wanted to find out if anyone has any idea of what i can do except for buying a new volume down button thats my last resort apprently its £35 to fix
easy way to fill up you thanks meter guys as any sort of input and advice is extremely appreciated.
alphadavid99 you fried your lcd when you flashed cwm made for note in the other thread.
Hi i have the issue... I am able to get in Recovery and Download Mode.
While in recovery i had formatted the whole internal memory and tried flashing about three AOSP ROMs (Formatting each time before Flashing) but the only result was the endless boot up screen (not boot loop).
Then i tried flashing a sammy ROM and it worked...
Could someone tell me why am I able to flash Sammy ROM but not AOSP (such as ARCHIDROID & SLIMBEAN).
My Model is GT-i9300
Current Modem - XXUGMK6
Current ROM - S4 Revolution ROM (TM)
Thanks in advance for your time if someone has any suggestions

[Q] Stuck at Samsung splash screen - Need to backup data

The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
dinho10r said:
The phone was working fine until the battery was empty. I tried to charge it and turn it on, but it's stuck at the Samsung logo splash screen. Holding the power button only restarts the device, so to turn it off I'll have to take the battery out. I don't know how to fix this, and if a factory reset is the only option, I need to backup my data first which I currently don't know how to either (without accessing the OS).
I've got to the Android System Recovery 3e menu and tried clearing cache, which did not help. The option to do a factory reset is also there, but I need to backup my data first, and I don't even know if this will fix the problem.
I'm also able to enter download mode.
When connected to my PC it detects an unknown device named 'samsung_android", and it shows up in adb. I've tried doing a backup through adb, but it wanted me to unlock the screen to accept the backup, which I could not, because I'm stuck at the splash screen.
Is there anything I can do to save my data? Anything through adb? Install root (never done this before)?
Click to expand...
Click to collapse
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
cglegion said:
Hey mate, can you get into the recovery mode? Try flashing the TWRP recovery and boot by pressing power button + home button + volume up and find an option to mount your USB storage via USB cable and see if your phone's folder tree is available from the Windows Explorer and hopefully you can backup your data by then. Just make sure you have all the drivers ready.
Hope that helps.
Click to expand...
Click to collapse
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
dinho10r said:
Yeah, I can get into recovery mode. But how do I get the TWRP to my phone? Do I have to put it on my external memory card and then load it from there?
And I could only find it for a S2 Exhilarate SGH-i577 device. Does it matter if my phone is a S2 GT-I9100?
I've never rooted my phone earlier. Is a root necessary to flash a ROM?
Click to expand...
Click to collapse
Correct. Put the TWRP zip on your external and flash it normally via recovery mode such as CWM not the android 3e recovery. Or find an odin flashable zip for yoyr device.
I am very sure there is one for I9100 because I ran into the exact same problem before and managed to figure it out. You just have to search for it can't give you a link because I'm on mobile now.
You need to root your phone in order to install a new recovery such as TWRP/CWM or even flash new kernel and ROM.
Good luck.

[Q] Stuck in ODIN mode and can't get out

Hello
My situation goes as follows: I'm on a Cyanogenmod 11 nightly, as I flash a new ROM from time to time. So I know how to get into recovery and that kind of things. I've installed TWRP recovery, instead of the CWM one. I'm on a mac by the way.
As I was a little bit fast, I accidentally rebooted into download mode instead of recovery. Now my phone remains that way, only without the info in the top left (normally it says ODIN Mode and four other lines of information).
I tried to get the battery out and to drain the battery, both gave the same result: it booted in "downloading... do not turn off target !!"
I tried ODIN, Kies, Heimdall and adb trough terminal, and even the CM installer; none of these things seemed to recognize my phone.
I've been googling for over two hours now and I'm getting desperate. Is my phone ready for the bricks? I can't go to a shop tomorrow as it is the national holiday in Belgium. So still 32 hours of trying ahead of me...
Any ideas? If you guys have any additional questions, please ask.
Thanks in advance
R.
erdeebee said:
Hello
My situation goes as follows: I'm on a Cyanogenmod 11 nightly, as I flash a new ROM from time to time. So I know how to get into recovery and that kind of things. I've installed TWRP recovery, instead of the CWM one. I'm on a mac by the way.
As I was a little bit fast, I accidentally rebooted into download mode instead of recovery. Now my phone remains that way, only without the info in the top left (normally it says ODIN Mode and four other lines of information).
I tried to get the battery out and to drain the battery, both gave the same result: it booted in "downloading... do not turn off target !!"
I tried ODIN, Kies, Heimdall and adb trough terminal, and even the CM installer; none of these things seemed to recognize my phone.
I've been googling for over two hours now and I'm getting desperate. Is my phone ready for the bricks? I can't go to a shop tomorrow as it is the national holiday in Belgium. So still 32 hours of trying ahead of me...
Any ideas? If you guys have any additional questions, please ask.
Thanks in advance
R.
Click to expand...
Click to collapse
Try removing the external memory card, if you have one.. and try the hard reset method.. sometimes it may work...search in forum for hard reset methods... or you can connect the phone and continue with odin again to see anything happens...:good:
cooljay5 said:
Try removing the external memory card, if you have one.. and try the hard reset method.. sometimes it may work...search in forum for hard reset methods... or you can connect the phone and continue with odin again to see anything happens...:good:
Click to expand...
Click to collapse
Removing simcard and external storage didn't work, as well as putting another card in my phone. I'll try the hard reset and come back to you.
Thanks!
cooljay5 said:
Try removing the external memory card, if you have one.. and try the hard reset method.. sometimes it may work...search in forum for hard reset methods... or you can connect the phone and continue with odin again to see anything happens...:good:
Click to expand...
Click to collapse
Odin does nothing, I tried Kies methode, but it stopped after the download.
erdeebee said:
Odin does nothing
Click to expand...
Click to collapse
Have you tried the hard rester method?
Whilst in download mode hold power button for about 1 minute until it vibrates? Maybe your buttons are stuck.
Sent from S3 Mini
Using XDA App
LiamAtkins90 said:
Have you tried the hard rester method?
Whilst in download mode hold power button for about 1 minute until it vibrates? Maybe your buttons are stuck.
Sent from S3 Mini
Using XDA App
Click to expand...
Click to collapse
Hard reset as in tried to flash trough Kies, I can't do anything else, right?
I tried the pwoer button, but it just loops in download mode, without the information on the top left.
I do get it into download mode WITH the information, but than Kies simply says there's no phone attached.
erdeebee said:
Hard reset as in tried to flash trough Kies, I can't do anything else, right?
Click to expand...
Click to collapse
Are you familiar with the PC flashing tool Odin? It's specifically for Samsung devices.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Download and install Odin onto your PC it will flash a stock image onto your device (No root, Stock recovery)
http://www.sammobile.com
Head to Sammobile and download your ROM firmware specific to your device.
Run ODIN on your computer and connect your phone.
When it recognizes it, check "Auto Reboot" and "F.Reset Time".
Everything else should be left unchecked.
On your computer, unzip the ROM file you downloaded. It should give you something with the extension of
.tar.md5
Press "PDA" on ODIN and select this file.
Everything should be as shown here: http://gyazo.com/fea7a1c8b7a7b5bb287fb0a0c70056dc
Click Start and wait for it to do it's thing. It'll take quite a few minutes.
When it's finished, you're done.
If it hangs on boot ones it flashed, reboot to Stock Recovery and do a factory reset it should boot up fine now, (also 1st boot takes about 3 minutes.)
Let me know how it goes
EDIT: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Stock Firmware is on this page
Sent from S3 Mini
Using XDA App
LiamAtkins90 said:
Are you familiar with the PC flashing tool Odin? It's specifically for Samsung devices.
http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
Download and install Odin onto your PC it will flash a stock image onto your device (No root, Stock recovery)
http://www.sammobile.com
Head to Sammobile and download your ROM firmware specific to your device.
Run ODIN on your computer and connect your phone.
When it recognizes it, check "Auto Reboot" and "F.Reset Time".
Everything else should be left unchecked.
On your computer, unzip the ROM file you downloaded. It should give you something with the extension of
.tar.md5
Press "PDA" on ODIN and select this file.
Everything should be as shown here: http://gyazo.com/fea7a1c8b7a7b5bb287fb0a0c70056dc
Click Start and wait for it to do it's thing. It'll take quite a few minutes.
When it's finished, you're done.
If it hangs on boot ones it flashed, reboot to Stock Recovery and do a factory reset it should boot up fine now, (also 1st boot takes about 3 minutes.)
Let me know how it goes
EDIT: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Stock Firmware is on this page
Sent from S3 Mini
Using XDA App
Click to expand...
Click to collapse
As I'm on a mac, I tried jodin, but it doesn't seem to recognize my phone.
Sorry
Sent from S3 Mini
Using XDA App
So, my phone is bricked?
Last try: A windows computer and it worked. Don't know why it didn't work on my mac.
Awesome. I'm happy for you mate. Glad you got it fixed
Sent from S3 Mini
Using XDA App
No not at all.your phone not brickd.only one option is to flash your phone via odin on 4.3 available on sammobile.
Hot thanks?
Sent from my GT-I9300 using XDA Free mobile app

[Q] Is my phone fixable?

I have an S3 GT-I9300 and about a week ago it started refusing to turn on. It was fully charged, and I'd get LED indicators for messages, emails etc, but none of the buttons would switch on the screen, neither would unplugging the cable. The only way to fix it was to remove the battery, and after removing it one time, it refused to boot, sticking at the Samsung logo screen. Recovery mode wouldn't work, I tried resetting to factory settings, and wiping the phone, but it kept sticking (I think at cache), and wouldn't boot whatever I did.
I tried to update the firmware through Kies, which just froze at 94% every time. I also tried Odin, which again froze about the same point. So I tried following this guide, but when the phone restarted it tried looking for files on an SD card (which I don't have), so no luck. I tried repartitioning, but it keeps failing and if I try to flash the phone it now fails with "there is no PIT partition". I can't remember at which point it started happening, but although I can still get into download mode, switching the phone on any other way gives me a glitched screen something like this.
Is there any way at all to fix this phone at this point?
@edwards87: I'm confused about your description: no recovery mode, but factory reset? A root tool for rescue?
If you can boot into download mode, download actual firmware and Odin from sammobile.com (all new, delete old stuff) and try to flash it.
rp158 said:
@edwards87: I'm confused about your description: no recovery mode, but factory reset? A root tool for rescue?
If you can boot into download mode, download actual firmware and Odin from sammobile.com (all new, delete old stuff) and try to flash it.
Click to expand...
Click to collapse
I can get into download mode (power + home + vol down), but can no longer get into recovery mode (power + home + vol up). When I could get into recovery mode right at the start, none of the recovery options did anything because it said there were missing files or directories.
I've tried several firmwares from sammobile through different versions of Odin and they all froze at the same place towards the end. Now none of them go anywhere because there's no PIT partition.
Then my next step would be a 3part-firmware +PIT-file.
rp158 said:
Then my next step would be a 3part-firmware +PIT-file.
Click to expand...
Click to collapse
Finally found a 3-part firmware but I get the same problem - repartition operation failed.
@edwards87: sounds like broken internal storage. Can't help you, sorry.
I need a pit file for galaxy s3 i9300 16GB please help me

Categories

Resources