Hello xda's !
So, i have galaxy ace and CM7.2 Miracle v4 Rom
But i have a problem too, i plugged in usb, there no reaction.
Same for charging battery !
Can someone help me ?
How?
More details pls
How old is the battery and phone?
Be Kind everyone you meet is fighting a hard battle
if it is pluged in to pc you need the drivers for usb connection asfor the battery I don't know
jumbobombo said:
How?
More details pls
How old is the battery and phone?
Be Kind everyone you meet is fighting a hard battle
Click to expand...
Click to collapse
Just 2 months
You need a new wire and USB drivers on ur pc...
Remove battery, re-insert and try charging then..Use a different usb cable if possible.
Xr01d_GT said:
Remove battery, re-insert and try charging then..Use a different usb cable if possible.
Click to expand...
Click to collapse
Thank you !
WORK
and sorry for the inconvenient ^^
Kigsuha said:
Thank you !
WORK
and sorry for the inconvenient ^^
Click to expand...
Click to collapse
Nice, not a problem.
Lol... You have no idea what all stuff was going on in my mind about your problem
Be Kind everyone you meet is fighting a hard battle
jumbobombo said:
Lol... You have no idea what all stuff was going on in my mind about your problem
Be Kind everyone you meet is fighting a hard battle
Click to expand...
Click to collapse
XDA addiction
Related
hi guys my mobile when i make power off it make restart instead of power off any on help me pleeaaaaase !!!!!!!!!!!!!!!!!
MI619DO said:
hi guys my mobile when i make power off it make restart instead of power off any on help me pleeaaaaase !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
No water damage?
MI619DO said:
hi guys my mobile when i make power off it make restart instead of power off any on help me pleeaaaaase !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Sounds like a kernel issue.
What rom/kernel you using?
PS. For future help topics you should give the basic info about your setup like device, kernel , rom etc as it saves people then having to ask you and waste time.
TheATHEiST said:
Sounds like a kernel issue.
What rom/kernel you using?
PS. For future help topics you should give the basic info about your setup like device, kernel , rom etc as it saves people then having to ask you and waste time.
Click to expand...
Click to collapse
i install many roms like cm10 and omega and alliance with phliz kernel and dorimanx and this problem goes up .... after this problem i flashed my phone by odin (original ICS) and the problem still work
gastonw said:
No water damage?
Click to expand...
Click to collapse
water damage make this sucks??
MI619DO said:
water damage make this sucks??
Click to expand...
Click to collapse
Maybe power button is making a short circuit. If it gets heated right next to the rear camera pull the battery and send it to Service center.
Hi guys.
My Xperia Active running CM9( free xperia project), Now, it cant be charge with some charger or computer usb port( work normally before) . I wondering is this problem from rom/kenel or harware? and how to fix it?
thanks for reading.
hw issue.
big.brother said:
Hi guys.
My Xperia Active running CM9( free xperia project), Now, it cant be charge with some charger or computer usb port( work normally before) . I wondering is this problem from rom/kenel or harware? and how to fix it?
thanks for reading.
Click to expand...
Click to collapse
first change rom/kernel., if nothing Is fixed then try anther cble.
if still no results then its usb port problem
contact customer care.
prantoroy said:
first change rom/kernel., if nothing Is fixed then try anther cble.
if still no results then its usb port problem
contact customer care.
Click to expand...
Click to collapse
thanks man, i have removed the memory card and everything work normally. I never think about this before.
big.brother said:
thanks man, i have removed the memory card and everything work normally. I never think about this before.
Click to expand...
Click to collapse
press thanks?
Hi everyone, hoping for some help.
My galaxy s2 wont power on at all.... I have tried plugging USB into the PC and pressing Vol Up but nothing - this happened after replacing the USB charge port. The power flex cable accidentally ripped off.
I plug it into my laptop and it starts installing the driver but then fails. Anyone experienced this before?
Detach battery, leave it in 5 minute and attach again , power on. I face this problem before(but the cause is not same to you ) and my phone power on after i do those steps. Hope your phone will work again.
Or you could wait for KeithHarris39 who knows what he's talking about with this stuff to read your thread (he's posted to Q&A in the last hour or two, so he's probably around somewhere) & he'll actually give you some idea of what might have gone wrong/what you can do about it.
MistahBungle said:
Or you could wait for KeithHarris39 who knows what he's talking about with this stuff to read your thread (he's posted to Q&A in the last hour or two, so he's probably around somewhere) & he'll actually give you some idea of what might have gone wrong/what you can do about it.
Click to expand...
Click to collapse
i cant send u a pm ...tried it says u dont want to get disturbed..
^^^
Why would you want to send me a PM ? I have the PM system turned off by design.
MistahBungle said:
^^^
Why would you want to send me a PM ? I have the PM system turned off by design.
Click to expand...
Click to collapse
something worth ur interest...
If you are describing the flex cable that is/was attached to the USB charger board.....then the 'inadvertent detachment' is likely the cause of your issues......
First, the damage that *has* taken place is likely to have caused a lack of charge reaching the battery....which is likely the reason the phone won't boot....dead battery and no way to charge it.
Second, it's likely the PC isn't installing the drivers as the damage caused is probably stopping the PC recognising the phone for what it is.....we all know PC's are dumb, if they're not told exactly how to do something, they just sit there scratching their metaphorical heads....lol
Repairing this part is *highly unlikely* to succeed........the only option....get another replacement.... the only saving grace......they're not that expensive......
Sent from my GT-I9100 using Tapatalk
I very much doubt you have anything to say to me in PM that would be 'worth my interest'. However, if you still believe that to be the case, this thread is as good a place as any to say it.
doctor_droid said:
something worth ur interest...
Click to expand...
Click to collapse
Maybe its the winner of the next Melbourne Cup..........
MistahBungle said:
I very much doubt you have anything to say to me in PM that would be 'worth my interest'. However, if you still believe that to be the case, this thread is as good a place as any to say it.
Click to expand...
Click to collapse
just wanted to ask u whether u would be interested for getting a RC title..if yes then would have nominated u to the committee .
u really thought i would ask u for investing money
Thankyou for the offer, that's very kind of you to think of me that way & I do appreciate it But no, I'd rather not, thanks.
Why not ? You might be a gambling guru for all we know
doctor_droid said:
just wanted to ask u whether u would be interested for getting a RC title..if yes then would have nominated u to the committee .
u really thought i would ask u for investing money
Click to expand...
Click to collapse
MistahBungle said:
Thankyou for the offer, that's very kind of you to think of me that way & I do appreciate it But no, I'd rather not, thanks.
Why not ? You might be a gambling guru for all we know
Click to expand...
Click to collapse
k mate ..its ur decision c ya around here itself till my s2 lives...
keithross39 said:
If you are describing the flex cable that is/was attached to the USB charger board.....then the 'inadvertent detachment' is likely the cause of your issues......
First, the damage that *has* taken place is likely to have caused a lack of charge reaching the battery....which is likely the reason the phone won't boot....dead battery and no way to charge it.
Second, it's likely the PC isn't installing the drivers as the damage caused is probably stopping the PC recognising the phone for what it is.....we all know PC's are dumb, if they're not told exactly how to do something, they just sit there scratching their metaphorical heads....lol
Repairing this part is *highly unlikely* to succeed........the only option....get another replacement.... the only saving grace......they're not that expensive......
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thought as much but only just got back on here. Thanks for your time. Already ordered the bits that all arrived today ( except I missed the bloody posty )
So I will let you know how my soldering skills hold up after years of being dormant! The board itself seems fine... just kicking myself for giving it that little pull and forgetting that the power button is stuck on. Doh!! The phone is my old one and now belongs to the Mrs... wasn't too happy with me lol. So much so, and I'm sorry to say she switched to the dark side.. iPhone.
Now I think I'll see what ROMs are good for the s4... easy rooted it from day one but now I feel ready for a change. First android I've never completely changed
Sent from my GT-I9505 using XDA Premium 4 mobile app
Ok so I reattached the parts.. but still won't boot up. I plug it into the laptop and connect to Odin.. the id:com turns blue and unknown upload mode is on screen... but it just hangs and does nothing any ideas?
Sent from my GT-I9505 using XDA Premium 4 mobile app
I am have used RR rom with dark kernel by movez for few days it have charged b/w 1600-1900 amp but the next day it does charge b/w 400-500amps..
I thought it was kernel fault then flashed viper OS but same result
Then flashed Xiaomi.eu and epic rom then same result charging speed is between 500-800 amps...
Then flashed fastboot rom charging speed does not charge more than 1000 amps
Should I need to change charger and cable ,can I buy another stock cable and use ,!! Does it solve the problem ??
Need a permanent solution
Someone help me
Thanks in advance:highfive:
???????
Which method you are using to measure current ? Probably usb port on your phone/charging cable has rust accumulated or phone's USB port is faulty. Try cleaning it and check with different cable/charger. If still problem, change usb port on phone.
kashinath said:
Which method you are using to measure current ? Probably usb port on your phone/charging cable has rust accumulated or phone's USB port is faulty. Try cleaning it and check with different cable/charger. If still problem, change usb port on phone.
Click to expand...
Click to collapse
My charger and cable perfectly works with my Galaxy j7 and charges faster
But will try to buy new charger
Try viper os I'm sure you will never face this issue
rahuldholpuria said:
Try viper os I'm sure you will never face this issue
Click to expand...
Click to collapse
Facing same issue on viper os as I already mentioned in OP
Nexus-exprerience is working fine for me in b/w 1.5amp
Need a permanent fix any help is appreciated:good:
Try to reflas miui again
agriculture said:
Facing same issue on viper os as I already mentioned in OP
Nexus-exprerience is working fine for me in b/w 1.5amp
Need a permanent fix any help is appreciated:good:
Click to expand...
Click to collapse
Try to reflash miui again then flash any rom
rahuldholpuria said:
Try to reflash miui again then flash any rom
Click to expand...
Click to collapse
Tried, issue persists
Have you tried with another fast charger
agriculture said:
Tried, issue persists
Click to expand...
Click to collapse
Have you tried with another fast charger if no
Then try it
Okk
Probably because your charging port is dead... It happened to me but I replace the charging port with a new one and everithing is fine now
Snap239 said:
Probably because your charging port is dead... It happened to me but I replace the charging port with a new one and everithing is fine now
Click to expand...
Click to collapse
Yes brother it seems same issue for me , what will be the cost for changing Charing port !?
agriculture said:
Yes brother it seems same issue for me , what will be the cost for changing Charing port !?
Click to expand...
Click to collapse
www.aliexpress (DOT) com/item//32755867272.html
I bought this part, waiting for it to arrive now. Same issue as you.
Benjimaestro said:
www.aliexpress (DOT) com/item//32755867272.html
I bought this part, waiting for it to arrive now. Same issue as you.
Click to expand...
Click to collapse
Can you show screen shot of the product -or product name which you ordered
agriculture said:
Can you show screen shot of the product -or product name which you ordered
Click to expand...
Click to collapse
https://i.imgur.com/maprhCK.png
How's that?
It takes my phone also a long time to charge up I have used different chargers do I also have to replace the port?
Flash agni kernel
And btw don't look at the charging current as soon as you connect
Torn off screen for 2 min or so and then check
ilvmyname said:
Flash agni kernel
And btw don't look at the charging current as soon as you connect
Torn off screen for 2 min or so and then check
Click to expand...
Click to collapse
Tried with agni kernel same issue for me
agriculture said:
Tried with agni kernel same issue for me
Click to expand...
Click to collapse
Change rom and try
ilvmyname said:
Change rom and try
Click to expand...
Click to collapse
No use brother, I figured it out its my charger problem
Ordered new one :good:
hello to all, someone by chance knows what kind of cable to buy that allows you to use Lotg and charging together? I tried it with a Y cable but nothing...:crying:
Alexkungfu said:
hello to all, someone by chance knows what kind of cable to buy that allows you to use Lotg and charging together? I tried it with a Y cable but nothing...:crying:
Click to expand...
Click to collapse
I want to know too
Alexkungfu said:
hello to all, someone by chance knows what kind of cable to buy that allows you to use Lotg and charging together? I tried it with a Y cable but nothing...:crying:
Click to expand...
Click to collapse
wagner2029 said:
I want to know too
Click to expand...
Click to collapse
Sorry for the bump but I want to know too ^_^
Did any of you got it working? I couldn't get it to work.
msacco4 said:
Sorry for the bump but I want to know too ^_^
Did any of you got it working? I couldn't get it to work.
Click to expand...
Click to collapse
doesn't work, I tried a few and none worked.
you must use one function at a time , both at the same time do not work