[Q] how to restore HTC Evo 3d to original firmware without locking the bootloader? - HTC EVO 3D

hello everyone
I recently installed KingCobra3D ICS 1.2 ROM on my EVO 3D, and it was running well until all of a sudden it started having many issues of turning off while the screen is sleeping (it wont turn back on until I do a battery pull), rebooting, and wont turn on until I do multiple battery pulls. First I thought it was the kernel, so I reflashed the kernel along with the ROM many times, and it still does those issues. My question is, how dp I go back to the original stock Gingerbread firmware without relocking the bootloader? I flashed the ICS ROM, not firmware.
EDIT: I tried restoring my backup from the recovery, but the phone didn't boot after that
any help is greatly appreciated. thanks
extra helpful info:
ROGERS HTC Evo 3D
GSM, Carrier Unlocked
unlocked bootloader via HTCDev method, S-ON, H-BOOT-1.49.0008

madmajd said:
hello everyone
I recently installed KingCobra3D ICS 1.2 ROM on my EVO 3D, and it was running well until all of a sudden it started having many issues of turning off while the screen is sleeping (it wont turn back on until I do a battery pull), rebooting, and wont turn on until I do multiple battery pulls. First I thought it was the kernel, so I reflashed the kernel along with the ROM many times, and it still does those issues. My question is, how dp I go back to the original stock Gingerbread firmware without relocking the bootloader? I flashed the ICS ROM, not firmware.
EDIT: I tried restoring my backup from the recovery, but the phone didn't boot after that
any help is greatly appreciated. thanks
extra helpful info:
ROGERS HTC Evo 3D
GSM, Carrier Unlocked
unlocked bootloader via HTCDev method, S-ON, H-BOOT-1.49.0008
Click to expand...
Click to collapse
Hello madmajd,
S-ON as your phone is you can not flash boot.img(kernel) from the recovery.
Extract boot.img from your gingerbread rom.zip and flash-it from fastboot
Code:
fastboot flash boot boot.img
reboot in recovery, do a full wipe
and flash your rom
sincerely,

fxjumper said:
Hello madmajd,
S-ON as your phone is you can not flash boot.img(kernel) from the recovery.
Extract boot.img from your gingerbread rom.zip and flash-it from fastboot
Code:
fastboot flash boot boot.img
reboot in recovery, do a full wipe
and flash your rom
sincerely,
Click to expand...
Click to collapse
While its true YOU CAN flash the kernel that way its not needed with HTC Unlock...
If u enter your recovery via fastboot command prompt ( fastboot boot your recoveryfilename.img), roms And KERNELS WILL flash like normal from the recovery. Here's some extra info I pm'd to another gsm user...
mpgrimm2 said:
Some key points:
- The ICS /ICS Leaked roms (3.6/4.0) typically have trouble booting the stock kernel on several HTC Unlocked phones. This doesn't seem to occur on S-off phones. (Boot loops are usually a sign of a kernel issue).
- I am on a Sprint CDMA EVO3D & have no idea how to s-off your gsm version/downgrade the bootloader.
- I do have an HTC Unlocked guide in my signature that covers many of the basics for the CDMA version. It's the same process/steps for gsm, but the files used need to be gsm specific from the gsm threads (recovery, kernel, roms, etc).
- If u decide to run an Ruu (exe or zip), you must be locked/relocked & run the same or higher firmware version as currently installed. The exe will work with the phone booted to android or with the bootloader in "fastboot usb". The zip must be renamed exactly PG86IMG.zip and put directly on the root of the sdcard & boot into the bootloader.
- If the phone boots to the bootloader, you can use fastboot command prompt to " unlock" the phone again with your unlock code. Then fastboot flash the recovery again (4ext or Cwm 4.0.1.4 gsm versions recommended), then fastboot boot the recovery, run a superwipe (or format system, data & cache), & flash a gingerbread Rom or one of your nand backups.
- The correct HTC unlocked flashing process (ICS or GB) is to enter recovery via fastboot command prompt, format/superwipe, & flash the Rom (and/or kernel) as you normally would. (4ext Recovery is a solid workaround to using fastboot commands)
Click to expand...
Click to collapse
Sent from my PG86100 using Tapatalk

Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?

wbpo5l said:
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
Click to expand...
Click to collapse
Doing what?
You might want to consider upgrading your firmware and getting S-OFF status. I have a guide here that can help.
ramjet73

Too late!
Ok so I followed someone's note to me that said I needed to relock the phone first. So following the instructions for relocking I did the "fastboot oem lock" and now I am "Relocked" but the phone only boots now to Bootloader/Fastboot.
What do I do now?
All I really want to do at this point is get the phone back working. I don't care about root as this phone is going to someone else.
Thanks

wbpo5l said:
What do I do now?
All I really want to do at this point is get the phone back working. I don't care about root as this phone is going to someone else.
Thanks
Click to expand...
Click to collapse
Just do step1 of the guide I linked in my previous post and you will be back to stock.
ramjet73

wbpo5l said:
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
Click to expand...
Click to collapse
Hi
I think you need to downgrade to HBOOT 1.49.007 Because versions 1.50.00 and above have a restart issue with custom ROMS
The bad new is that you must spend your HTC EVO 3D S-OFF
I followed this thread to downgrade
http://forum.xda-developers.com/showthread.php?t=17434661
Follow this thread to return to 1.49.007 version of hboot
http://forum.xda-developers.com/showthread.php?t=1906172
If you really want to s-on your phone after this downgrade, you can enter
fastboot oem writesecureflag 3
in fastboot mode, but i don't recommend it
Pay attention to these manipulations and does not hesitate to completely read all the tutorials and all comments.
goodbye,

fxjumper said:
Hi
I think you need to downgrade to HBOOT 1.49.007 Because versions 1.50.00 and above have a restart issue with custom ROMS
The bad new is that you must spend your HTC EVO 3D S-OFF
Click to expand...
Click to collapse
I know he didn't say that, but I think the hboot 1.5 indicates that he has a CDMA model.
ramjet73

Thank you
ramjet73 said:
I know he didn't say that, but I think the hboot 1.5 indicates that he has a CDMA model.
ramjet73
Click to expand...
Click to collapse
ok

Thank you everyone for your help.
Was able to re-lock it and find and install through the correct RUU.exe.
Now my wife has a phone again.

Related

[Q] Stuck in bootloop...

Hi,
i unlocked my Evo 3d the HTCdev.com way, al working fine and in tried to flash a new rom through CWM recovery (LeeDrOiD_3D_V5.3.0)
Now my unit is staying in a bootloop, the white HTC screens pops up for a few seconds and boots throught to the LeeDrOid bootscreen, you hear the sound for a second and it reboots again.
I Already tried to flash the boot.img extracted from the LeeDrOid manually, but it stays the same.
Did i overlooked something? Did i brick my unit? I dont know...
The following numbers pop up when i boot in the bootloader:
***Unlocked****
SHOOTER-U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio: 11.25.3504.06
What to do? Or do i have a fancy paperweight now?
I think its because you are trying to flash a gingerbread rom. AFAIK its not possible to boot GB on 1.53 hboot. I would suggest trying an ICS rom
So i installed Yoda's ICS v5.1 and now the unit only boots till the white HTC screen and reboots on and on...
maybe if you list the things you tried i could help you more.
factory reset and wipe cache+delvik cache before installing rom?
manually flashed boot.img?
i would suggest getting s-off to save yourself all the hassle
How do i install S-OFF when i cannot fully boot the unit?
Yes, i tried to install Boot.img manually through ABD, but issue still persists.
S-off isnt something to install. I'd recommend you run an RUU and get beck to stock. After that look in the gsm development section you will find a thread for s-offing your phone. It involves the wire trick.
Sent from my HTC EVO 3D X515m
Which RUU should i download, which one do you recommend? And i can do this while connected with Fastboot, isnt it?
http://www.filefactory.com/file/c0a...00_10.13.9020.08_2M_release_203403_signed.exe
Sent from my HTC EVO 3D X515m
I had the very same issue, see my post here for some help http://forum.xda-developers.com/showthread.php?t=1897719
I think your hboot is the key; if your unlocked through HTC while on a GB rom then you are limited to GB roms, if you want ICS, you need to re lock, ruu the stock ICS rom, then unlock, then install the custom ICS rom.
I'm no expert but that seemed to fix my issue, i did take the extra step and get S-off, so i truly get full control of my phone.
His hboot is 1.53 which means he did update to ics. Relocking his bootloader and running an RUU should get him to boot into stock rom. Then maybe he can s-off.
There are so many people with 1.53 hboot having problems with every single rom. I didnt take the ota for this exact reason. Revolutionary hboot hasnt given me trouble with any rom.
Sent from my HTC EVO 3D X515m
EM|NEM said:
His hboot is 1.53 which means he did update to ics. Relocking his bootloader and running an RUU should get him to boot into stock rom. Then maybe he can s-off.
There are so many people with 1.53 hboot having problems with every single rom. I didnt take the ota for this exact reason. Revolutionary hboot hasnt given me trouble with any rom.
Click to expand...
Click to collapse
I just checked the unlimited.io (JBear) website and their modified bootloader for the Evo 3D GSM on ICS is 1.53.5353 so it seems like they support the wire trick with the ICS update, but I agree that it would be better to start by flashing the ICS RUU.exe then HTC unlock and root before doing JuopunutBear.
ramjet73
Phone boot loops
guys please i need your help.
my phone always restarts after booting. its HTC EVO 3D GSM WITH HBOOT 1.53.0007
i have already rooted the phone but its on S-ON.
USB DEBUGGING is not turned on and i don't have recovery installed.
am completely lost cos am new on this. My phone has been out of service for almost 5 months now please someone should
help me cos am going crazy here.

Need Help with Upgrading to ICS

Hey guys,
So the last time I flashed ROMs was before the ICS update rolled out for the EVO3D. I want to start playing with the new ICS roms, but I'm not quite sure on how to proceed. I was hoping for some instruction. Here's what I have:
JBear Hboot (so S-OFF)
HBOOT - 1.50.5050
RADIO - 1.06.00.1216 (also S-OFF)
Any help would be much appreciated. Thank you
In my impatience, I flashed a stock ICS RUU.exe. I now have HBOOT 1.58 (but not JBear - I believe it is still S-OFF). However, when I try to access Recovery, I get an image of a black phone with a red triangle with an exclamation mark inside of it. Help!
your recovery is wiped. flash it again.
btw what does your bootloader say? s-off? if you're s-on then unlock bootloader then flash recovery
erjune said:
In my impatience, I flashed a stock ICS RUU.exe. I now have HBOOT 1.58 (but not JBear - I believe it is still S-OFF). However, when I try to access Recovery, I get an image of a black phone with a red triangle with an exclamation mark inside of it. Help!
Click to expand...
Click to collapse
You're fine. Since you are S-OFF you just need to download and flash a custom bootloader and then reflash your recovery via the "fastboot flash recovery recovery.img" command, then you can flash or restore a rooted ROM.
The stock 1.58 bootloader you have now won't let you run that fastboot command without doing the htc unlock, and the custom bootloader is a better choice. Once you unlock the bootloader, it will show "***RELOCKED***" instead of "***LOCKED***" if you return to stock, and that flags to HTC/Sprint that your phone has been unlocked. You could also flash a custom recovery using a PG86IMG.zip file if that's easier.
BTW, the next time you start a thread with a question it should be in the Q&A forum.
ramjet73
Thanks for the help, ramjet (and for your post on how to change hboot when S-OFF)! I thought I did post this in Q/A - sorry! If a mod could move this thread there, that would be great.
I think my problems should be solved, but I'll post again if I run into any problems. Thanks again

Recovery Problem

Thanks for taking the time. I've been working at fixing this for hours now, and to no avail. I was following the instructions found here (http://forum.xda-developers.com/showthread.php?t=1808332&highlight=reboot) ...but the short of it was I was upgrading my Hboot so that I could flash a JB ROM. Here's where the problem is, I have no recovery. When I try to access my 4EXT from fastboot, it shows a picture of a phone lying down with the app update symbol (an arrow pointing down with two or three, cant remember right now, around it) over it. Then after a short while it is replaced by a picture of a phone with an exclamation in a triangle. When I try to load a new recovery with SDK it says FAILED (remote: not allowed). I also tried loading back to Hboot 1.50, still nothing. If it matters, my phone came with 1.50.
I greatly appreciate any advice. Here's my current setup.
CDMA Evo 3d
Hboot 1.58 locked S-OFF
Radio 1.09.00.0706
Software 2.89.651.2 710RD
I would download the zip from here: http://forum.xda-developers.com/showthread.php?t=1889438
Then lock the bootloader in fastboot using fastboot oem lock. Run the ruu.exe to put your phone at stock (you'll still be s-off). Hopefully phone will boot.
You would then flash whichever hboot and recovery you want and flash a ROM.
No worries, all the stock hboots (if not unlocked using htcdev) won't allow you to use fast boot to flash recovery/boot partition even though you are s-off.
You can use a custom hboot like revolutionary / juopunutbears / eng hboot to use those commands. To flash another hboot, and just download the respective PG86IMG.zip and put it on the root of sdcard.
OR
If you current ROM is rooted, go to 4ext.net and download the free version and use it to install 4ext recovery on your phone or use flash image gui by joeykrim to flash recovery.
Those two apps will work on any hboot but your ROM should be rooted.
Hope this helps...
How did I know Coal would come to my rescue. Well after more work, and your great advice, I got it working again. The trick was I needed a JBear Hboot zip. Thanks again Coal, you are a legend.
Edit: Thanks mnomaanw, we posted that at the same time hahaha.

[Q] htc evo 3d gsm boot loop

Hello all,
I'm Beginner with htc, i have problem with boot loop, i have done lot of search in the internet and i applied many procedures but i couldn't resolve the problem.
My phone is :
HTC EVO 3D GSM
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.02.02
eMMC-boot
Can i have your helps please?
Thank you very much
Best regards,
On hboot 1.53 s-on you can only flash sense based roms. This means ics only, no jelly bean, because jb is based on cyanogenmod. If you have 4ext recovery, go into it, and in the Tools section, activate Smartflash. That way you will not have any more boot loops on ics sense roms, but the rest are still unavailable to you... i suggest you revert to stock ruu, go to unlimited.io and get s-off, then downgrade hboot to 1.49, for everything to work. There are a lot of tutorials around here for that
Sent from my Evo 3D GSM using xda premium
aagrou said:
Hello all,
I'm Beginner with htc, i have problem with boot loop, i have done lot of search in the internet and i applied many procedures but i couldn't resolve the problem.
My phone is :
HTC EVO 3D GSM
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.02.02
eMMC-boot
Can i have your helps please?
Thank you very much
Best regards,
Click to expand...
Click to collapse
What abaout your bootloader is it LOCKED or UNLOCKED ? Do u have custom rom or original stock ICS rom?
Dadovvv said:
What abaout your bootloader is it LOCKED or UNLOCKED ? Do u have custom rom or original stock ICS rom?
Click to expand...
Click to collapse
thank you for your replays,
my phone is unloked, i don't know each rom or ruu i can use i downloaded a lot of rom and ice, i had installed them by 4rex and fasboot but doesn't work.
I can't switch my phone to s-off.
thank you very much for all helps,
best regrades,
I really suggest you to S-OFF and for that, here's a small tutorial: Go to 4EXT, Wipe everything except SD Card. Then reboot into bootloader. In bootloader click the power button to activate fastboot and connect your phone to pc. In a command prompt, while the phone is connected (in hboot fastboot, very important) write "fastboot oem lock". After you have done so, find the RUU file to fit your phone (http://androidfiles.org/ruu/?dir=Shooter search for the one to fit your radios). After the ruu has completed, root your phone again, and then get S-OFF from unlimited.io. Then everything will work nicely
posedatull said:
I really suggest you to S-OFF and for that, here's a small tutorial: Go to 4EXT, Wipe everything except SD Card. Then reboot into bootloader. In bootloader click the power button to activate fastboot and connect your phone to pc. In a command prompt, while the phone is connected (in hboot fastboot, very important) write "fastboot oem lock". After you have done so, find the RUU file to fit your phone (http://androidfiles.org/ruu/?dir=Shooter search for the one to fit your radios). After the ruu has completed, root your phone again, and then get S-OFF from unlimited.io. Then everything will work nicely
Click to expand...
Click to collapse
when the RUU has completed just unlock bootloader again and u are ready to go with wire trick ,,no need to root (root does not require more for wire trick)
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Dadovvv said:
when the RUU has completed just unlock bootloader again and u are ready to go with wire trick ,,no need to root (root does not require more for wire trick)
Click to expand...
Click to collapse
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_264110_signed.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262715_signed.exe
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
posedatull said:
I really suggest you to S-OFF and for that, here's a small tutorial: Go to 4EXT, Wipe everything except SD Card. Then reboot into bootloader. In bootloader click the power button to activate fastboot and connect your phone to pc. In a command prompt, while the phone is connected (in hboot fastboot, very important) write "fastboot oem lock". After you have done so, find the RUU file to fit your phone (http://androidfiles.org/ruu/?dir=Shooter search for the one to fit your radios). After the ruu has completed, root your phone again, and then get S-OFF from unlimited.io. Then everything will work nicely
Click to expand...
Click to collapse
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Rad io_11.77.3504.00U_11.25.3504.06_M_release_264110_s igned.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262714_sig ned.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262715_sig ned.exe
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Thank you, this has been very helpful!
posedatull said:
On hboot 1.53 s-on you can only flash sense based roms. This means ics only, no jelly bean, because jb is based on cyanogenmod. If you have 4ext recovery, go into it, and in the Tools section, activate Smartflash. That way you will not have any more boot loops on ics sense roms, but the rest are still unavailable to you... i suggest you revert to stock ruu, go to unlimited.io and get s-off, then downgrade hboot to 1.49, for everything to work. There are a lot of tutorials around here for that
Sent from my Evo 3D GSM using xda premium
Click to expand...
Click to collapse
aagrou said:
Thank you all,
I have done this yesterday but doesn't work for my phone, i have use all ruu.exe that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
Please, can you send me a link for any ruu works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Click to expand...
Click to collapse
I think you can enter the fastboot mode in the phone, connect it to your pc, use "fastboot oem readcid", the cid can tell what ruu to choose.
radiowave21 said:
I think you can enter the fastboot mode in the phone, connect it to your pc, use "fastboot oem readcid", the cid can tell what ruu to choose.
Click to expand...
Click to collapse
Hello, my cid: VODAP304:
but i don't no wich ruu work with my phone.
thank you,

[Q] Evo 3D that hates me!!! ROOT s-OFF and unlock bootloader cant select yes

[Q] Evo 3D that hates me!!! ROOT s-OFF and unlock bootloader cant select yes
Hi all, im a newbie to android rooting etc, so please be patient if I dont understand... XD
I will try to give a backround with a very detailed discription for those who might have the same problem, a similar problem or for those trying to help...
so I bought this beast in Feb with stock software on: this was my 1st root, s-off attempt :
http://forum.xda-developers.com/showthread.php?t=2130585
1st attempt quote from post
Hi there,
Developers, gonna be developers and android noobs
I got a small issue with mu EVO 3d GSM...
Firstly Id like to apologize if this has been asked...
Problem: I need to get past BOOTLOADER BLOCK !!!
Before you carry on reading -
Bought this phone online, from China, Original HTC!!! but with 1 or 2 chinese apps installed, Android 2.3.4...
This was standard when I first entered bootloader (out of the box)
***LOCKED***
SHOOTER_U PVT SHIP S-OFF RH
HBOOT-1.49.0012
RADIO-10.13.9020.08_2M
eMMC-boot
What is suprising is it needed to say Locked and s-on...
So I wanted to root and s-off...
Tried Revolutionary... Everything ran well, after 2nd reboot into bootloader, error - Communications between phone and PC has been interrupted
After that I retried and it said - 'Your device is already s-off' then it wanted to download and install CWM Recovery 4.0.142 Revolutionary...
HTCDEV - Step 13 didnt happen, it just stayed on the normal bootloader screen (in Fastboot USB)
Flashed a earlier version of HBOOT (1.49.007) before Revolutionary ROOT method(revolutionary didnt support HBOOT 1.49.0012), i noticed everytime i 'completed' revolutionary method with error, my HBOOT changed to 1.49.1107 for some reason, IDK
Now my bootloader setup is:
***Revolutionary***
SHOOTER_U PVT SHIP S-OFF RH
HBOOT-1.49.1107
RADIO-10.13.9020.08_2M
eMMC-boot
In CWM Recovery - I flashed SU.zip, it removed /bin and /xbin, and wanted to start copying or rooting file and then showed an error msg 'installation aborted', booted into ROM and SU app requested SU access???
BTW... downloaded and tried 3 RUU's all 3 for 3d of course and all 3 gave the same error - MODEL ID ERROR (i need the correct model) and in fastboot...
Use same Rev code : fastboot flash unlocktoken Unlcok_code.bin
Half the time it is done successfully but with no disclaimer screen (stays on fastboot) and changes hboot to 1107
OR
Gives error (Remote : Partition no avaiblable) or (Remote : not allowed)
Try fastboot oem lock, Doesnt lock and same result as mentioned above and every now and then it says loading custom splash sceen failed, htc disclaimer screen???
If anyone has had this problem or similar, please help, I would really appreciate it
Thnks in advance!!!
END
Now, Ive got a similar problem,
HBoot
1.58.5858 Jpbear
Unlocked
So I flashed the RUU_Shooter_U_TWM_TW_1.23.921.5_Radio_10.55.9020.00_10.13.9020.29_M_release_207920_signed.exe, it was the closest I could find with HBoot 1.49.0012 and gb 2.3.4...
Okay, np it flashed it with no problems... but little did I know, I lost root, bootloader relocked with disclaimer screen and lost s-off... Im buggered
So after messing around including almost bricking my phone, flashing new hboots, trying htcdev unlock with rogers, EMEA and sprint, no luck...
The only result is it showing the disclaimer screen (as mentioned in 1st boot attempt) that i cant select yes...
I tried flashing recovery, however when I flash recovery, it either hangs with HTC screen for a min or two then reboots or just hangs there forever...
Somewhere along the line I tried booting into Android and it jut boot in fastboot, for some unknown reason it also didnt pickup the PG86IMG.zip file I had on, it actually didnt pickup and PG86IMG files???
I also came across writesecureflag 3 in fastboot, gave it a try and it gave me a ***security warning***...
After that, I coud flash a PG86IMG but when I tried the htcdev unlock, I select ye, no response, removed battery and it said ***unlocked***, but when I flash a recovery, it flashes recovery in cmd but cant boot into it or it just doesnt flash onto the phone???
Somehow in between all of this I could get past the "yes" in unlock bootloader which was pure luck of the joy of the moment made me forget what I did before, I also tried flashing these RUU's
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262715_signed(1)
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_264110_signed
When booted in TWN-TW RUU, I could install Rom manager and flash CWM through that but through fastboot, it didnt boot through it
fastboot flash recovery recovery.img
fastboot boot recovery.img
RESULT: hangs on htc screen for a min or 2 then reboot into OS
Now im currrently on Asia ICS, hboot jbear 1.58.5858, htc recovery...
And in want of root, s-off, and most important able to Unlock Bootloader by selecting yes with a response,
please ANY help would be of use
thnx in advance
Its not much but will have a small paypal reward for those who helped (btw it will prob help others aswel)
[TAGS] : root issue, s-off problem, unlock bootloader cant select yes, evo 3d hboot not detecting PG86IMG, evo 3d bootloop
wow, you got a used or refurbished 3d which was already s-off. if you had posted before doing anything ,all you needed to do was flash a recovery and flash su zip. When you have s-off with custom hboot, like you had, you cannot unlock through htcdev and you don't have to. S-off with custom hboot means you can already flash any hboot ,recovery,Rom ,kernel or any mods.
You never needed HTC dev unlock.
you said.you are s-on with jbear.hboot? I.don't think.that's possible ,.check again if it's s-off or s-on . If it's s-on then it cannot be jbear.
You never lost s-off when you ran the RUU, you lost s-off by running the write secureflag command . It was your luck you were on stock.hboot , if you were on custom one,your evo 3d was dead for sure. Now flash the RUU that is made for your phone. then follow instructions from unlimited.io or ramjet73's thread , flash recovery then su zip. If you want another Rom you can directly flash that Rom without su.
Again, you never needed the htcdev. But now you will need it for the wire trick.
Thnx for responding, u made my day xD
mnomaanw said:
wow, you got a used or refurbished 3d which was already s-off. if you had posted before doing anything ,all you needed to do was flash a recovery and flash su zip. When you have s-off with custom hboot, like you had, you cannot unlock through htcdev and you don't have to. S-off with custom hboot means you can already flash any hboot ,recovery,Rom ,kernel or any mods.
You never needed HTC dev unlock.
you said.you are s-on with jbear.hboot? I.don't think.that's possible ,.check again if it's s-off or s-on . If it's s-on then it cannot be jbear.
You never lost s-off when you ran the RUU, you lost s-off by running the write secureflag command . It was your luck you were on stock.hboot , if you were on custom one,your evo 3d was dead for sure. Now flash the RUU that is made for your phone. then follow instructions from unlimited.io or ramjet73's thread , flash recovery then su zip. If you want another Rom you can directly flash that Rom without su.
Again, you never needed the htcdev. But now you will need it for the wire trick.
Click to expand...
Click to collapse
So, okay, I messed around abit more, not as if I could do any further damage besides bricking LOL
So this is my position and will leave it till next response...
***Relocked*** (can unlock, relock np because of s-on, if s-off, I cant, it just hangs after selecting yes, no response)
HBoot 1.49.0012
I have fastboot and OS access,
cant flash recovery or zip, etc, can change cid
Hboot doesnt read PG86IMG.zip files at all,
Goes through PG86... list, hangs 2 sec on PG86IMG.zip, says checking or parsing PG86IMG.zip for less than a sec then 'cancels', goes to hboot screen
Rev tool does not work
1st attempt - (1st line)Zerging root...
result- Cannot aquire root
for 2nd consecutive to 3,4,5,etc attempt
- goes to 2nd line in rev tool,
result gives error Communications with phone stopped,
When flashing recovery, it flashes perfectly, when fastboot boot recovery.img or hboot>recovery, hangs for a while then reboots
So flashing files through fastboot is a no go (generally gives error > remote:not allowed)
Thus conclusion, im considering the downgrade/unbrick method but It doesnt pickup and PG86IMG files (check exact speeling p.s. have done this alot)
I did a day ago aquire root, 4ext recovery but wanted unlock boot loader, so s-on, the only way to unlock, then got myself to this delema, stupid I know :silly:
So if you have any tricks up your sleeve, let me know please and thnx

Categories

Resources