My UK version phone.
GSM patch doesn't (?) help.
Always bootloop or stack at "Welcome to Motorola" after 'four-corners-trick'.
Always have to flash factory with only working rescue from Zergrush.
Sent from my XT910 using XDA
What's your based Rom (2.3.5 or 2.3.6)?
You use Bootstrap?
What wipes did you set in CWM, before you install an Rom?
What Roms have you tried till now?
Gesendet von meinem XT910 mit Tapatalk 2
Are you flashing "For GSM only!!11!" ROMS?
I don't think CDMA ROMS work on a GSM phone, unless you're on ICS leak. Then they're global.
Giblet535 said:
Are you flashing "For GSM only!!11!" ROMS?
I don't think CDMA ROMS work on a GSM phone, unless you're on ICS leak. Then they're global.
Click to expand...
Click to collapse
It should work if applied the Cdma > Gsm patch but need to be 2.3.6 version.
Enviado de meu XT910 usando o Tapatalk 2
I am now building a GSM Patch for the leak based roms. I already could boot successfully the Black Widoe ICS Leak on the GSM retail leak. Still editing the patch to make it work.
My base is 2.3.6 and I use bootstrap.
Sent from my XT910 using XDA
I have a razr from uk. I have this probleme too. You need change your rom 2.3.6 to firmware .20
Just use button search to find before open a new thread
Sent from my XT910 using XDA
I don't have to apply any GSM patch and I'm running the cm9 variant and it works well enough for me. And no motorola bloatware. Loving some ics. Not long till our official upgrade.
Sent from my XT910 using xda premium
Sexywacko said:
I don't have to apply any GSM patch and I'm running the cm9 variant and it works well enough for me. And no motorola bloatware. Loving some ics. Not long till our official upgrade.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
you don't need the gsm patch because you are running the cm9 from j.y.daddy, which IS GSM version. Or you have a cdma device and in that case you don't need a patch. And the othet thing is, that you are probably using the GB-based cm9. I am building a patch for the LEAK-BASED ICS CDMA custom roms to make it work on GSM devices.
Gesendet von meinem XT910 mit Tapatalk 2
I searched before posting.
Returned useless results.
Opened new thread.
I've answer you via PM. You didn't get it?
Gesendet von meinem XT910 mit Tapatalk 2
mass.w said:
I searched before posting.
Returned useless results.
Opened new thread.
Click to expand...
Click to collapse
If you want us to help please post which rom you want to run. the only one which really needs the 4-corner-trick to set up on GSM is eclipse. most problems are already reported in the roms threads. So I really don't think that you would only get useless results if you would do serious research.
And if you get the same issue on every Rom you try, read the instructions again carefully, then you will find a solution. Otherwise tell us exactly what doesn't work.
Gesendet von meinem XT910 mit Tapatalk 2
Related
Hey guys,
i've a question and i think this one is very important...
There are several ICS leaks out there and evereyone of them seems to be based on another ICS kernel version...
My question is:
After i've installed any of that leaks, will i be able to flash the hopefully soon arriving OFFICIAL 'Q2'-ICS (Retail) Upgrade?
i'll flash the leak posted by Spryte.
Sh4itan said:
Hey guys,
i've a question and i think this one is very important...
There are several ICS leaks out there and evereyone of them seems to be based on another ICS kernel version...
My question is:
After i've installed any of that leaks, will i be able to flash the hopefully soon arriving OFFICIAL 'Q2'-ICS (Retail) Upgrade?
i'll flash the leak posted by Spryte.
Click to expand...
Click to collapse
We will be able to flash the fastboot files over the leak. No problem.
"shaitan"???
Gesendet von meinem XT910 mit Tapatalk 2
dtrail1 said:
We will be able to flash the fastboot files over the leak. No problem.
"shaitan"???
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
I hope so
I'll give this leak a chance to impress me
jeah, 'shaitan'... problem?
PS: and you are sure it's possible to change to the official ics??
Do you have a link to the cheesecake app
Sent from my DROID RAZR using xda premium
spryte said:
If you uprade to "my" ICS leak and still have root, you can look for updates via cheesecake, which should bring you directly onto the upgrade path again (I don't have root any more, so I have to wait)
Click to expand...
Click to collapse
I didnt think cheesecake worked on ics.
Sent from my DROID RAZR using xda premium
delete this, thanks
Hi thanks this Rom...is this a GB edition, isn't it..?
o16v said:
Hi thanks this Rom...is this a GB edition, isn't it..?
Click to expand...
Click to collapse
Yes gb 2.3.6, waiting for ics ota, don't like to beta test leaks
R3Ds Themes
This is for gsm or cdma
Sent from my XT910 using xda premium
mujju85 said:
This is for gsm or cdma
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is for CDMA only 'cause tread starter said that it should be installed only via Safestrap, whilest GSM RAZRs have Bootstrap instead. Safestrap is only for CDMA XT912, don't even try to flash this ROM! BTW there's at least one person from Russia who has bricked his GSM XT910 by flashing this stuff.
You can't really brick an Device with an locked Bootloader
Just charge your battery and have your Fastboot Files and RSD ready!
But maybe GSM could try it with the Frasertag GSM Patch for Eclipse (GB).
If I wouldn't stuck on an Leak I would already have give it an try
Gesendet von meinem XT910 mit Tapatalk 2
@fkfmfz
Could you please describe the way you have put Motorola services in this ROM? I think other great ROMs such as MIUI and Gummy should have these services working, especially Motocast and camera related software.
@HSD-Pilot
Good morning, friend!
In fact we have no extra details regarding that person's steps but anyhow - I've just warned all who isn't attentive enough.
Rom running fast and rock solid. Thanks for doing this sir. Is there any way to remove the quick settings from the pull down menu in the theme? I'm odd in that I like that area of the pulldoen clean Anyway thanks again for the rom.
Sent from my DROID RAZR MAXX
*edit to clarify
Hey guys can anyone point me to the stock 4.0.4 file for RSD. I'm trying to upgrade to JB but when i try flashing the zip it fails. I'm assuming i have to start fresh. I'm stock rooted with no recovery but it still fails to flash. Or is there a ota jb download i can use through RSD to get straight to the point?
XT912 verizon 4.0.4
Thanks
Sent from my DROID RAZR using xda app-developers app
Aw: .211 rsd
http://sbf.droid-developers.org/cdma_spyder/list.php
Gesendet von meinem XT910 mit Tapatalk 2
will it brick my device if i use the 4.0.4 RSD file on my droid razr running 4.1.2 cause i REALLY need to get back to stock....there isnt one for 4.1.2 :crying:
need JB file for RSD
HSD-Pilot said:
http://sbf.droid-developers.org/cdma_spyder/list.php
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Thanks well I made it to JB but now I have to redo it because my wifi isnt working. any suggestions
Aw: .211 rsd
http://www.droidrzr.com/index.php?/...ndows-+-Mac-+-Linux-(All-In-One!)#entry219194
I'm not that confirmed with the XT912, but this should bring you back on the road
Gesendet von meinem XT910 mit Tapatalk 2
still having issues
HSD-Pilot said:
http://www.droidrzr.com/index.php?/...ndows-+-Mac-+-Linux-(All-In-One!)#entry219194
I'm not that confirmed with the XT912, but this should bring you back on the road
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
That looks like what I need but but my computer is being retarted I cant seem to download any batakang ro third party sites? any Ideas
Hey guy
I wanna know is there any way to restore my CID from AP fastboot, without root permission?
My (GSM) device bricked after OTA, and only the o2 JB fastboot from RSD lite bring it back to life.
But my cid is deleted.. And i wanna restore it to boot up normally and able to use USB mass storage..
Any solution?
Regards,
If i remember right, you got an Latam Razr (AmericanMovil)?
You're currently running an EU Rom, so you can't restore your Cid. You have to wait for an Latam JB Version.
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
If i remember right, you got an Latam Razr (AmericanMovil)?
You're currently running an EU Rom, so you can't restore your Cid. You have to wait for an Latam JB Version.
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
cool..
wait for rom or wait for method to root JB.. nice
Thanks for answer.
I used to have a SE Xperia X8 in the past.
When I started unlocking it I found out that in order to flash a ROM, you sould be rooted, same here with my xt910.
Although in order to flash a kernel you sould have first unlocked your bootloader. The kernel flashing was done with a PC program (.exe) called Flashtool. (You could also change the baseband version using flashtool, which I don't know what it is...)
So, how does it work with xt910?? I've red something about CID, which again, I don't even know what it is ( ), and nothing about bootloader or something.
I would really need some help here!
Thanks!
This device's bootloader hasn't been unlocked yet. And probably never will, if you are looking to flash Roms install safestrap or bootmenumanager, and then read the OPs that should do, you can check some vídeo tutorials at youtube also...
Sent from my XT910 using xda premium
Steven87 said:
This device's bootloader hasn't been unlocked yet. And probably never will, if you are looking to flash Roms install safestrap or bootmenumanager, and then read the OPs that should do, you can check some vídeo tutorials at youtube also...
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
And what about kernels? They are all flashed via recovery?? What a "kexec" is? A kernel, right?
Every kexec ROM brings their own kernel. Kexec bypasses the bootloader lock and loads the kernel con top of the stock one, the only kernel you can flash in recovery is jbx, bit you have to install a kexec ROM first... Check the tutorials con youtube, they are very good...
Sent from my XT910 using xda premium
maxnaxos said:
And what about kernels? They are all flashed via recovery?? What a "kexec" is? A kernel, right?
Click to expand...
Click to collapse
Check the dev section. There you can find my JBX-Keenwl. It currently works only with 4.2.2 roms. But I am working on 4.3 now.
Steven87 said:
Every kexec ROM brings their own kernel. Kexec bypasses the bootloader lock and loads the kernel con top of the stock one, the only kernel you can flash in recovery is jbx, bit you have to install a kexec ROM first... Check the tutorials con youtube, they are very good...
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Thanks a lot!
Two last questions:
1) If I flash jbx, then can I normally run the stock 4.0.4 rom from ss? And if not, is there any way to get to my previous kernel?
2) What CID is all about??
Sent from my XT910 using XDA Premium HD app
http://forum.xda-developers.com/showthread.php?t=2325764
see he re for how to BMM (which you can flash kernels/basebands and more)
CID is a customer ID for keeping you to flash a firmware form other region
With BMM you can backup, erase and restore your CID
maxnaxos said:
Thanks a lot!
Two last questions:
1) If I flash jbx, then can I normally run the stock 4.0.4 rom from ss? And if not, is there any way to get to my previous kernel?
2) What CID is all about??
Sent from my XT910 using XDA Premium HD app
Click to expand...
Click to collapse
There is NO need to play with the CID anymore! But if you think you have to do it anyways, please keep multiple backups of your CID on save place (computer, USB stick...).
Without the backup you will be stuck with bmm/bp tools boot which busts your warranty for sure.
Gesendet von meinem XT910 mit Tapatalk 4
dtrail1 said:
Check the dev section. There you can find my JBX-Keenwl. It currently works only with 4.2.2 roms. But I am working on 4.3 now.
Click to expand...
Click to collapse
Looking forward to seeing a 4.3 build of your JBX.... was running 0.8.1 on Paranoidandroid rom 3.69 and it was awesome!!!!!!!!
$H0RTY 140 said:
Looking forward to seeing a 4.3 build of your JBX.... was running 0.8.1 on Paranoidandroid rom 3.69 and it was awesome!!!!!!!!
Click to expand...
Click to collapse
Thx. Check 8.2 until I can release 4. 3 kernel
Gesendet von meinem XT910 mit Tapatalk 4