I am noob in s2 kitchen, I want install this rom..
I'm on Androidhouse 2.3.6, and kernel: [email protected] #101, baseband I9100XXKP1, ROM version: TurkbeyRom v30
Tutorial or help me pleasse
here are the steps for the instalation mate..you find them in the faq on the resurrection remix thread with all the files you need..hope this is enough
The steps on the OP are very clear but apparently some users miss some things or can't get a properly installation so, here are the extended steps (personally i'm always use this method):
Reboot into recovery
Wipe Data / Factory Reset
Wipe Cache Partition
Install the Main ROM
In recovery go to Advanced
Wipe Dalvik Cache
Fix Permissions
Wipe Cache Partition
Reboot
If at the first boot you can't do the configuration of the google account, skip this step and continue
When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
This is the moment for install all the extras like themes, fix's, kernels, etc.
Enjoy!!!
ionutz1708 said:
here are the steps for the instalation mate..you find them in the faq on the resurrection remix thread with all the files you need..hope this is enough
The steps on the OP are very clear but apparently some users miss some things or can't get a properly installation so, here are the extended steps (personally i'm always use this method):
Reboot into recovery
Wipe Data / Factory Reset
Wipe Cache Partition
Install the Main ROM
In recovery go to Advanced
Wipe Dalvik Cache
Fix Permissions
Wipe Cache Partition
Reboot
If at the first boot you can't do the configuration of the google account, skip this step and continue
When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
This is the moment for install all the extras like themes, fix's, kernels, etc.
Enjoy!!!
Click to expand...
Click to collapse
Thanks, but I am on 2.3.6, how install recovery? only flash android 4 zip? and what kernel?
i think you need to read this to know exactly what you have to do http://forum.xda-developers.com/showthread.php?t=1075278 ..if you have any question i'll be glad to try to help you
Here are best videos you will ever see for galaxy s2 rooting, CWM installation, and ICS installation:
--rooting your galaxy S2 the easiest and safest way: (If not already rooted)
http://galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2/
-- Install CWM
http://galaxys2root.com/galaxy-s2-r...ckworkmod-recovery-on-rooted-galaxy-s2-i9100/
--Install ICS Resurrection:
http://galaxys2root.com/galaxy-s2-hacks/how-to-install-rom-on-galaxy-s2/
You will notice that all files needed are listed below video except the last one which you can download from here:
http://forum.xda-developers.com/showthread.php?t=1436854
Remember always to take a backup before flashing any rom.
Good Luck.
Related
Just install the Resurrection Remix ics v1.9.1[4.0.4] ROM onto my ICS 4.0.3 (using DXLP9) and found that my Vibration is gone and cant work.
Advise from the maker of the ROM suggest me to wipe the data and i have tried but no help.
Anyone here has similar issue and can help or any seniors here can advise?
Thanks....
mrlow81 said:
Just install the Resurrection Remix ics v1.9.1[4.0.4] ROM onto my ICS 4.0.3 (using DXLP9) and found that my Vibration is gone and cant work.
Advise from the maker of the ROM suggest me to wipe the data and i have tried but no help.
Anyone here has similar issue and can help or any seniors here can advise?
Thanks....
Click to expand...
Click to collapse
Did you use the extended steps?
1.Reboot into recovery
2.Wipe Data / Factory Reset
3.Wipe Cache Partition
4.Install the Main ROM
5.In recovery go to Advanced
6.Wipe Dalvik Cache
7.Fix Permissions
8.Wipe Cache Partition
9.Reboot
10.If at the first boot you can't do the configuration of the google account, skip this step and continue
11.When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
12.When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
13.This is the moment for install all the extras like themes, fix's, kernels, etc.
14.Enjoy!!!
Did you make sure that the vibrate option is enabled for the feature you are trying to use? for example, you need to check vibrate and ring box under settings--> sound menu.
It work!! thanks for the advise...
Hi all,
for now I'm still on a GS2, but I am considering buying a GNote your rom and I like a lot. So I plan to install it on my S2 to go to.
A question: I am in CM9 for now, with your rom (which is based on CM9) can I do the update with the available Nightly of CM9 ?
Or maybe I did not understand (which should not wonder ) and it can not work like that?
Thank you in advance for the answer.
If you are on PARANOIDANDROID v1.0 and update to a nightly from CM9. You will then be on CM9 not PARANOIDANDROID.
Even tho it is based on CM9 it is two different things.
Updates that get put in to CM9 nightlys will be put in to PARANOIDANDROID when they want and their rom will be updated, so will there thread and the OTA updater.
To sum up, if you flash a CM9 Nightly then you will lose your PARANOIDANDROID rom.
Also make sure you use the extended steps to install a new rom.
The steps on the OP are very clear but apparently some users miss some things or can't get a properly installation so, here are the extended steps (personally i'm always use this method):
1.Reboot into recovery
2.Wipe Data / Factory Reset
3.Wipe Cache Partition
4.Install the Main ROM
5.In recovery go to Advanced
6.Wipe Dalvik Cache
7.Fix Permissions
8.Wipe Cache Partition
9.Reboot
10.If at the first boot you can't do the configuration of the google account, skip this step and continue
11.When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
12.When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
13.This is the moment for install all the extras like themes, fix's, kernels, etc.
14.Enjoy!!!
Thank's all.
Still Confused....
dwightvanbentem said:
Also make sure you use the extended steps to install a new rom.
The steps on the OP are very clear but apparently some users miss some things or can't get a properly installation so, here are the extended steps (personally i'm always use this method):
1.Reboot into recovery
2.Wipe Data / Factory Reset
3.Wipe Cache Partition
4.Install the Main ROM
5.In recovery go to Advanced
6.Wipe Dalvik Cache
7.Fix Permissions
8.Wipe Cache Partition
9.Reboot
10.If at the first boot you can't do the configuration of the google account, skip this step and continue
11.When you boot into the system, it's probably that you don't have data enabled (3g, H+) just reboot
12.When you boot again into the system the data will be enable and you can do the configuration of Google Account (if you don't do this before)
13.This is the moment for install all the extras like themes, fix's, kernels, etc.
14.Enjoy!!!
Click to expand...
Click to collapse
I have rooted my GT N7000 with Stock ICS ROM from SAMSUNG [India]
BaseBand Version : N7000DDLP4
Kernel : 3.0.15-N7000DDLP8
How do I go about?
Do I need to first downgrade it to GB Stock India
N7000DDLC1---------2.3.6---------2012 March---------N7000ODDLC1-----------India--------------------------------------
OR
Do I downgrade it to SGN_XX_OXA_KJ1_FACTORYFS ???
please guide what to do...
Issue installing
http://forum.xda-developers.com/showthread.php?t=1729331&fb_source=message
Can someone help me. Tried to post a question in that post itself but need to have 10 comments or something.
Anyways, followed the following instruction which said to (i think)
boot into cwm
wipe data/factory reset
wipe cache partition
wipe dalvik cache
then i tried to install the file that i get from mediafire using install zip from sdcard
Find the file (in the download folder is where i saved it) but as soon as it starts to install it, stops ..calling out to an error (something 7)
Could someone see if i did it correctly or there is some other issue?
Currently running broodrom rc5
Hi,
not wanting to write a long story about why and what I'll try to get straight to the point.
I've been trying to get a Cyanogenmod on my LG Optimus 2x/Speed/P990. Most of the (german) how-to's didn't work, until I found a toolkit named "AIO Toolkit for P990/SU 660" by SpyrosK, which did finally install a CWM-based recovery (v6.0.2.5).
Following the steps of the how-to's I found I tried installing various Roms, all of the available Cyanogenmod Roms from their homepage, and another I found somewhere else.
All ended with the same, the phone doesn't boot into the rom, but into the Stock 4.0.4 ICS
I'm installing in the following order:
-wipe data/factory reset
-wipe cache partition
-advances > wipe dalvik cache
-install zip from sdcard
-choose zip from external sdcard
-e.g. cm-7.2.0-p990.zip
-yes
-reboot system now
It always sends me back into stock 4.0.4
Did I mess up something in the CWM-order?
If you need any additional data, please let me know
Ask in the Optimus 2X forums, they can help you better.
I've recently downloaded the Stable version of CM and I don't know how to install it, after installing it will I lose my data? App game datas?
Thanks a lot
True. When you install a new rom you should wipe data. Otherwise it crashes on startup. You can back up the data that
duykhanh187 said:
True. When you install a new rom you should wipe data. Otherwise it crashes on startup. You can back up the data that
Click to expand...
Click to collapse
So how do I install it?
I've looked into the other installation guides but those are for CM10.2 (Andorid 4.3) so I think its different installation method from 10.1, but I cant find a tutorial
C'mon...Read the first page of the CM10 thread & follow the installation instructions. Doesn't take a MENSA member to get it done
If you have used titanium backup root hayz to backup game data. Want to install a new ROM to install it into RECOVERY. If the rom you download it tails. ZIP Remember to wipe data + cache + dakvil before.
My device GT-i9100G
note: im always start all my flash from stock ROM (meaning stock JB 4.1.2)
my usual method, all can be done in the phone, no need odin if youre already stock;
-download all related file, CM10.1.3, CM GApps, Blazing kernel v8 (if you dont want your binary counter to change)...put them in external SD
-boot into recovery, select apply update from external storage, select file blazing kernel v8, let it finish and reboot normally
-then reboot into recovery again and install your Cm10.1.3 and GApps by navigating to your external SD (sorry cant remember the path)
-after finish installing both above file, let it reboot...if bootloop, reboot back into recovery and wipe data, cache and dalvik, and then reboot
now your CM10.1.3 is ready~
-hit thanks if my post helps you-
First of all, this is my first post on this forum, so I'd like to say hello to everybody.
I made a bit of a mess with my father's phone (it was mine before he had it, so it was already modded), and the explanation will be somewhat long because I tried everything before coming here for help.
This phone had Android 5.1.1 Lollipop, installed through the official Cyanogenmod 12.1 Nightlies. It was working perfectly, but I wanted to install more Gapps on the /system partition and switch some of the original Cyanogenmod apps with the corresponding Google apps. I used Deltadroid's modular Gapps (Thread here: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368) to install everything I needed on the /system partition, but I only did a factory reset+cache wipe instead of wiping the /system partition too and starting from scratch, because I couldn't find the option to wipe the /system partition in the "stock" Cyanogen Recovery. Now the phone will boot, enter recovery mode and even get to the setup screen, but as soon as the Google Play Services are needed, they crash and the setup won't go on. I tried installing the CWM but the signature check fails every time, I tried using ADB but I'm no expert and I don't know how to make it work, I tried reinstalling the ROM and wiping /data and /cache once again to no avail, I tried basically everything but it seems the only thing that can be done is wiping the /system partition and reinstalling both the ROM, the Gapps and the add-ons.
The problem is, I have no idea how to wipe the /system partition, so I was wondering if anyone here could help.
Thanks in advance.
Hi @Valtekken
You just need to have a "signed" .zip to flash through that recovery. Try the philz 6.48.4 attached here. I have heard of a few people not being able to flash this one, if it doesn't install, use the other one first, reboot to recovery, and then flash 6.48.4. So -
1. Flash the philz recovery
2. Reboot to recovery, not system
2a. (Flash the other one, reboot to recovery [if you used XWMS3 first])
3. Do your wipes(you should only need to wipe /system if you want to keep your data, but I always recommend a clean install if possible - /data, /cache, and dalvik/art cache as well)
4. Install the new CM12.1 and gapps
BTW the gapps you can flash will depend on whether or not you have repartitioned. If you have stock /system partition just install a pico or minimal gapps
noppy22 said:
Hi @Valtekken
You just need to have a "signed" .zip to flash through that recovery. Try the philz 6.48.4 attached here. I have heard of a few people not being able to flash this one, if it doesn't install, use the other one first, reboot to recovery, and then flash 6.48.4. So -
1. Flash the philz recovery
2. Reboot to recovery, not system
2a. (Flash the other one, reboot to recovery [if you used XWMS3 first])
3. Do your wipes(you should only need to wipe /system if you want to keep your data, but I always recommend a clean install if possible - /data, /cache, and dalvik/art cache as well)
4. Install the new CM12.1 and gapps
BTW the gapps you can flash will depend on whether or not you have repartitioned. If you have stock /system partition just install a pico or minimal gapps
Click to expand...
Click to collapse
First of all, thank you for answering!
I tried many "-signed" .zips, but none of them worked, so I'll assume I used non-compatible ones. There was space for the Gapps on the /system partition, mainly because I made sure of getting only the Gapps and the few addons I needed, so the MB count was very low.
I'll try your recovery right now and let you know in a moment, hopefully this solves the problem and I can have the phone working again.
Managed to install the recovery, format the /system, /data and /cache partitions, install the rom, the Gapps and the add-ons. It worked, but the phone still gives me an "Unfortunately, Google Play Services has stopped". How can I get the apps to work? What could the problem be?
I solved the problem, finally...I changed the Gapps package (I used TK's Gapps) and managed to install it and make everything work.
Thanks for all your help! I think the thread can be closed now.