Hello my name is Angel and I just bought a Galaxy Ace But my problem is that you wanted to install a ROM with the factory recovery and when I gave him to Phone and Reboot is in the brand and model is not happening and you try to install the CWM but it says failed to read and now and I can not flash anything because he says Error 7 aborted What do I change the phone company or there is a solution
PD: Try putting on a Stock Rom worse nor can
Angel_Alonso said:
Hello my name is Angel and I just bought a Galaxy Ace But my problem is that you wanted to install a ROM with the factory recovery and when I gave him to Phone and Reboot is in the brand and model is not happening and you try to install the CWM but it says failed to read and now and I can not flash anything because he says Error 7 aborted What do I change the phone company or there is a solution
PD: Try putting on a Stock Rom worse nor can
Click to expand...
Click to collapse
you cannot flash a rom with stock recovery , you need cwm recovery
ok so is your phone model GT S5830 ?
Dragonoid said:
you cannot flash a rom with stock recovery , you need cwm recovery
ok so is your phone model GT S5830 ?
Click to expand...
Click to collapse
I try to do with Odin but I can not put the steps in emergency mode and try flashing the CWM but when I go to I get the Recovery Recovery Stock and if my phone is GT model S5830
1. What the hell do you want to tell us? You wrote everything in one confusing sentence! Who is "you"??? I didnt do anything with your phone ^^
2. Follow these instructions: http://forum.xda-developers.com/showthread.php?t=1034145
You'll have to flash Gingerbread with Odin before flashing custom ROMs! Just read the thread...
edit: too late
Angel_Alonso said:
I try to do with Odin but I can not put the steps in emergency mode and try flashing the CWM but when I go to I get the Recovery Recovery Stock and if my phone is GT model S5830
Click to expand...
Click to collapse
PLEASE answer these questions to the point yes or no should b the answers
1. do u have gingerbread on your phone ?
2. have you flashed cwm recovery ?
3. is your phone rooted?
Dragonoid said:
PLEASE answer these questions to the point yes or no should b the answers
1. do u have gingerbread on your phone ?
2. have you flashed cwm recovery ?
3. is your phone rooted?
Click to expand...
Click to collapse
1. Yes
2. No
3. Yes
Angel_Alonso said:
1. Yes
2. No
3. Yes
Click to expand...
Click to collapse
Then install CWMv5
This was sent from a Galaxy Ace. Problem?
follow this tutorial http://www.youtube.com/watch?v=BY7QNPfxzZ8 and flash cwm5 on your phone
and then download your preferred rom etc ..see if this thread helps you. read it fully ......
that guy was in the same situation as you :
http://forum.xda-developers.com/showthread.php?t=1670771
and ask if u have any more queries
One question, are you able to go to stock recovery? Can you access the option "install zip from sdcard"?
Sent from my Galaxy S IV
What is your stock rom? Gingerbread or froyo?
sent from my HENPON using APEDA PREMIUM APP
MODEL : GT-S5830 S.G.ACE
ROM : MIRACLE V4
CPU : 844MHZ
Related
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
XCQT said:
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
Click to expand...
Click to collapse
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Jokesy said:
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Click to expand...
Click to collapse
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
XCQT said:
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
Click to expand...
Click to collapse
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
XCQT said:
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Jokesy said:
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thank you so much. Got it up and running
CWM not getting installed
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Jay_7 said:
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Click to expand...
Click to collapse
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
TheATHEiST said:
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
Click to expand...
Click to collapse
M sorry bt i got that so what can i do to install the latest CWM ???
Jay_7 said:
M sorry bt i got that so what can i do to install the latest CWM ???
Click to expand...
Click to collapse
It doesnt matter, you have no reason to have latest, they are just updates to support more devices.
Just flash custom kernel, like latest Siyah, the kernels contain CWM.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
for step 1, we are installing a temp CWM for flashing kernel in step 2?
phone stuck in restarting when flashing cwm
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Flash siyah v6.
Sent from the little guy
gastonw said:
Flash siyah v6.
Sent from the little guy
Click to expand...
Click to collapse
Is this for me?...sorry...I didn't catch you.......Can you please elaborate or any link for my phone model and download links
---------- Post added at 07:52 AM ---------- Previous post was at 07:12 AM ----------
sunyreza said:
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Click to expand...
Click to collapse
can anybody help with details.........my phone is likely dead man.........
Yes it was meant for you, flash siyah v6 .tar version via Odin.
Sent from...this is not even my S2
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
tissaoui said:
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
Click to expand...
Click to collapse
I assume you are talking about PhilZ recovery........
If all you want is a custom recovery on a stock firmware then you have to match the recovery to the firmware build......
And you *do* realise that the leak/test firmware is not as stable as release firmwares don't you?
http://i.imgur.com/rVnFwJM.jpg
Respected Everybody,
I have a big problem. I just cann`t get out of "ODIN MODE " . After Flashing a custom rom (ICS AOKP 4.0.4), but i failed now when i boot up nothing comes up after the samsung logo. my phone is rooted , had ICS 4.0.4 on it and is an samsung galaxy s2 I9100.
Now it Says :
ODIN MODE (in red)
PRODUCT NAME : GT i9100
CUSTOM BINARY DOWNLOAD : YES (1 counts)
current binary : custom
" Downloading .............
Do not turn off target !! "
It is recognized by my PC via Odin ( <ID:0/004>Added!!).
Please help to get out of this problem. Anxiously waiting for help. Please Guide me.
As per your description, possible solutions as follows.
1. Boot your phone in recovery mode (Power+Home+Vol Up). Wipe Data/Factory Reset. Wipe Cache. Reboot
2. In download mode, flash stock ROM using different USB port with no internet connected.
This might solve your program.
Hit thanks if it helped you.
Please Help
mihirjoe said:
As per your description, possible solutions as follows.
1. Boot your phone in recovery mode (Power+Home+Vol Up). Wipe Data/Factory Reset. Wipe Cache. Reboot
2. In download mode, flash stock ROM using different USB port with no internet connected.
This might solve your program.
Hit thanks if it helped you.
Click to expand...
Click to collapse
Thanks Sir.
But I just cann`t go into recovery mode. Whenever I try to do so , nothing happen. It hangs on Samsung logo again.
I only access Odin Mode (Power+Home+ Vol Down). What should i do. Please Help me.
Micheal86 said:
Thanks Sir.
But I just cann`t go into recovery mode. Whenever I try to do so , nothing happen. It hangs on Samsung logo again.
I only access Odin Mode (Power+Home+ Vol Down). What should i do. Please Help me.
Click to expand...
Click to collapse
Your phone has entered a forced download mode.
You might have to flash a stock firmware to boot your phone properly
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
Your phone has entered a forced download mode.
You might have to flash a stock firmware to boot your phone properly
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Sir,
I follow you. Every thing was fine (according to ODIN Message). But now it hangs on samsung bootanimation logo screen. Every time I try It remains the same. Now please tell me what should I do ? Please Guide me.
Micheal86 said:
Thanks Sir,
I follow you. Every thing was fine (according to ODIN Message). But now it hangs on samsung bootanimation logo screen. Every time I try It remains the same. Now please tell me what should I do ? Please Guide me.
Click to expand...
Click to collapse
Now boot to recovery mode and perform a Factory Data Reset
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
Now boot to recovery mode and perform a Factory Data Reset
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Micheal86 said:
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Click to expand...
Click to collapse
Turn off your phone, push up on volume+homebutton then hold power! And then you're in recovery!
Micheal86 said:
Thanks Sir.
But, It will be very helpful for me ,if you please guide me to boot to recovery mode.
Click to expand...
Click to collapse
to boot to recovery mode.
1)turn off ur phone first
2) then hold the three button combo(Vol up + Home + Pwr button) simultaneously, hold until u see recovery then release.
3) in recovery u have the option ' Wipe Data/factory reset, hit the same and in the next screen select 'yes' to perform the wipe.
4) after finishing the same, again in recovery select ' reboot system' and wait for ur phone to reboot
Please Help
Sun90 said:
to boot to recovery mode.
1)turn off ur phone first
2) then hold the three button combo(Vol up + Home + Pwr button) simultaneously, hold until u see recovery then release.
3) in recovery u have the option ' Wipe Data/factory reset, hit the same and in the next screen select 'yes' to perform the wipe.
4) after finishing the same, again in recovery select ' reboot system' and wait for ur phone to reboot
Click to expand...
Click to collapse
Thanks.
After doing everything will my beauty lost it`s rooted feature ? If so, then what should I do to root it again ? Is it the same before ? But the only difference is then it was ICS and now this will be GB (as I download the GB stock rom).
Now it will be :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
Would you be kindly enough to guide me to root it again, so that after rooting I will be able to flash an ICS AOKP custom rom ?
BTW , it will be fine if the CF - ROOT version is 5 or higher.
Please Help
Adarzannh said:
Turn off your phone, push up on volume+homebutton then hold power! And then you're in recovery!
Click to expand...
Click to collapse
Thanks Sir.
I will try it.
Micheal86 said:
Thanks.
After doing everything will my beauty lost it`s rooted feature ? If so, then what should I do to root it again ? Is it the same before ? But the only difference is then it was ICS and now this will be GB (as I download the GB stock rom).
Now it will be :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
Would you be kindly enough to guide me to root it again, so that after rooting I will be able to flash an ICS AOKP custom rom ?
BTW , it will be fine if the CF - ROOT version is 5 or higher.
Click to expand...
Click to collapse
Yes, you will lose root access.
You can download CF-ROOT kernel XWKF3 here: download.chainfire.eu/24/CF-Root/SGS2/CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip
You need to first flash a stock based ICS ROM (at least), before flashing any AOKP based Rom
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
Yes, you will lose root access.
You can download CF-ROOT kernel XWKF3 here: download.chainfire.eu/24/CF-Root/SGS2/CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.zip
You need to first flash a stock based ICS ROM (at least), before flashing any AOKP based Rom
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Many, many thanks Sir,
for your most valuable advice, which you have given from the very beginning.
One thing, by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
Sir, Should I flash This One First ?
How do I install CWM v.6 (as I have read that it is much better than v.4 or v.5) after flashing the ICS AOKP ?
Please Help
Thank you all for helping me a lot.
Now I just want to know that after flashing GB 2.3.3 ( KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2) Why I can not root my device ?
Whenever I try to root it, after flashing the Kernel (CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4), it always says:
Checking Device Connection...
Device Connected!
Restarting ADB Server...
Checking ROOT Access...
Superuser Request Has Been DENIED! Aborting...
Why it is happening and how to solve it ?
Micheal86 said:
Thank you all for helping me a lot.
Now I just want to know that after flashing GB 2.3.3 ( KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2) Why I can not root my device ?
Whenever I try to root it, after flashing the Kernel (CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4), it always says:
Checking Device Connection...
Device Connected!
Restarting ADB Server...
Checking ROOT Access...
Superuser Request Has Been DENIED! Aborting...
Why it is happening and how to solve it ?
Click to expand...
Click to collapse
after flashing that GB firmware, do a factory reset, after that try rooting ur phone and see
Please Help
Sun90 said:
after flashing that GB firmware, do a factory reset, after that try rooting ur phone and see
Click to expand...
Click to collapse
Thanks for your reply.
I just want to share something with you.
I have read somewhere in this forum that never do a factory reset with the stock rom (because of it`s kernel). First anyone have to change the kernel of the stock rom with siyah or dorimanx or darknight and then do anything you want.
According to that I have just tried to do that, but don`t know why I cann`t. Whenever I try to do that it always says "no signature validation",or something like that. I use CWM v.4.
Do I change the CWM to v.5 or v.6 by flashing ? I just don`t want to use CWM v.4.
BTW, now I am in :
Android Version
2.3.3
Baseband Version
I9100DDKE4
KERNEL VERSION
2.6.35.7 - I9100XWKF3 - CL276555 [email protected] #2
BUILD NUMBER
GINGERBREAD XWKF3
It` rooted. Do I flash any ICS rom in it ? If so, please help me to do that.
Please guide me.
Micheal86 said:
1.
I have read somewhere in this forum that never do a factory reset with the stock rom (because of it`s kernel). First anyone have to change the kernel of the stock rom with siyah or dorimanx or darknight and then do anything you want.
2.
According to that I have just tried to do that, but don`t know why I cann`t. Whenever I try to do that it always says "no signature validation",or something like that. I use CWM v.4.
3.
Do I change the CWM to v.5 or v.6 by flashing ? I just don`t want to use CWM v.4.
4.
BTW, now , It` rooted. Do I flash any ICS rom in it ? If so, please help me to do that.
Please guide me.
Click to expand...
Click to collapse
1.
You are reading it WRONG!
What you read is only applicable to stock ICS 4.0.4 firmware. Nothing more!
Therefore in your case it is not applicable.
Those kernels you listed are ICS kernels, if you flash them on your phone, your device simply won't boot.
2. The reason why you couldn't flash those kernels is because they required minimum of CWM version 5.
3. You can change it by simply flashing Siyah kernel meant for gingerbread which comes with CWM version 5.
Like i said earlier, don't flash ICS kernel on Gingerbread, except an expert advise you on something.
4. If you want to flash an ICS ROM, it's very simple.
- First, you need to download Siyah kernel (for GT I9100, zip version) for gingerbread here : www.gokhanmoral.com/gm/2012/01/13/siyahkernel-v2-6-7/
- Flash the Siyah kernel via CWM recovery
- Download any stock based ICS ROM of your choice. When you are done, let me know.
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
1.
You are reading it WRONG!
What you read is only applicable to stock ICS 4.0.4 firmware. Nothing more!
Therefore in your case it is not applicable.
Those kernels you listed are ICS kernels, if you flash them on your phone, your device simply won't boot.
2. The reason why you couldn't flash those kernels is because they required minimum of CWM version 5.
3. You can change it by simply flashing Siyah kernel meant for gingerbread which comes with CWM version 5.
Like i said earlier, don't flash ICS kernel on Gingerbread, except an expert advise you on something.
4. If you want to flash an ICS ROM, it's very simple.
- First, you need to download Siyah kernel (for GT I9100, zip version) for gingerbread here : www.gokhanmoral.com/gm/2012/01/13/siyahkernel-v2-6-7/
- Flash the Siyah kernel via CWM recovery
- Download any stock based ICS ROM of your choice. When you are done, let me know.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Many,many thanks Sir, for your most valuable advice.
At first I`m really very sorry for my mistake.
I have just downloaded the recommended kernel (with link).
And I have downloaded three stock/stock based based ICS roms.
1. XWLPG.SalmanRom_v4
2. Omega_ICS_v15_Black_Blue_XWLPG
3. by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
(Though this one had the previous booting problem).
Now sir, please guide me.
Micheal86 said:
Many,many thanks Sir, for your most valuable advice.
At first I`m really very sorry for my mistake.
I have just downloaded the recommended kernel (with link).
And I have downloaded three stock/stock based based ICS roms.
1. XWLPG.SalmanRom_v4
2. Omega_ICS_v15_Black_Blue_XWLPG
3. by using "Check Fus Downloader 2.1 (by respected luffar joh), I have got a firmware for my region.
The details of the firmware is :
Product Code: GT-I9100LKAINU
Latest firmware: I9100XWLP7/I9100ODDLP9/I9100DDLPA/I9100XWLP7
Modified: 4/5/2012 6:15:29 PM
Filename: GT-I9100_INU_1_20120405181515_xrqgd7x460.zip.enc2.
(Though this one had the previous booting problem).
Now sir, please guide me.
Click to expand...
Click to collapse
1. People who ask questions hardly make mistakes. This is the reason why you haven't yet made any mistake.
2. The third ICS firmware you posted can only be flashed via Odin. I'll say, just keep it somewhere. You won't need it for now.
3. Have you flashed the Siyah kernel yet?
If yes, please post your present and kernel details
Sent from my GT-I9100 using Tapatalk 2
Please Help
Jokesy said:
1. People who ask questions hardly make mistakes. This is the reason why you haven't yet made any mistake.
2. The third ICS firmware you posted can only be flashed via Odin. I'll say, just keep it somewhere. You won't need it for now.
3. Have you flashed the Siyah kernel yet?
If yes, please post your present and kernel details
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Sir, I have just try to flash the kernel, but I cann`t.
It says :
"E: signature verification failed
Installation aborted".
Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Rash732 said:
Hello
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/2012/06/install-new-android-236-xxjw4-value.html
Now i am trying to flash my phone through odin but when its finshed it my phone shows some erorrs in red coloures i also wipe factory and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?
Click to expand...
Click to collapse
first flashed a karnel then try
Sent from my Micromax A68 using xda premium
country
premsrj said:
Go to the bootloader and try to install the CM10.1 again. Then see if it boots. If it does, good.. Check the forums for the correct method to install a factory image. Oh and make sure you are flashing the correct kernel too.
Click to expand...
Click to collapse
THANKS
yh i installed cm10 again n its booting up well n working again
i wana make sure can i download any stock rom of this device countries doesn,t matter for example i am in united kindom can i choose india or etc it will works ?
And one more question , can i flash my device through odin to direct with gingerbread 2.3.6 or should flash with lower rom like 2,21 etc ...
hi
Sent from my GT-I9000 using xda app-developers app
thank you man
I have a Samsung Galaxy Ace S5830i. I had no problem with rooting it, and am able to use Superuser and other root apps perfectly, but when i try to flash CWM on it, either from the ROMManager app, or from a zip file, it only displays CWM immediately after i flash it, but then the moment i press Reboot Now,and go back to the Recovery, i notice that it has reverted to the stock recovery. I have tried many different CWM recovery files, but it always works only for that one time, and then reverts to stock after reboot. I am using a stock ROM since i cannot flash Cyanogenmod until i get CWM to 'stick'. What do i do?
danny2104 said:
I have a Samsung Galaxy Ace S5830i. I had no problem with rooting it, and am able to use Superuser and other root apps perfectly, but when i try to flash CWM on it, either from the ROMManager app, or from a zip file, it only displays CWM immediately after i flash it, but then the moment i press Reboot Now,and go back to the Recovery, i notice that it has reverted to the stock recovery. I have tried many different CWM recovery files, but it always works only for that one time, and then reverts to stock after reboot. I am using a stock ROM since i cannot flash Cyanogenmod until i get CWM to 'stick'. What do i do?
Click to expand...
Click to collapse
its normal .......
we also use this cwm recovery [ it is known as temporary recovery ]
use it for flashing roms......no problem......
or
u can flash hell fusions kernel which include cwm as default recovery..........
also u can install rafeal's kernel which ve 3 variants [ cwm , rz , stock recovery] , choose acc. to ur need.....
abhi922 said:
also u can install rafeal's kernel which ve 3 variants [ cwm , rz , stock recovery] , choose acc. to ur need.....
Click to expand...
Click to collapse
NOOB. CWM and RZR need partitions in EXT4.
daxanh said:
NOOB. CWM and RZR need partitions in EXT4.
Click to expand...
Click to collapse
u should need to know how to respect others...........so ultimately u r a noob here who even dont know how to talk.......
Flashed Successfully
abhi922 said:
u should need to know how to respect others...........so ultimately u r a noob here who even dont know how to talk.......
Click to expand...
Click to collapse
I ended up using Simplicity v5 with Hell Fusion's Kernel. Thanks for the ROM Abhi922!
This basically solved my issue. Thanks for all your help guys!
We know who's noob
U daxanh
Starts a rom and discontinues it just after an update within two or three days
Sorry guys I killed my ace I think he would have committed a suicide cos ur a bad developer
Ohh I got a new one
Then starts a rom I think miui and discontinues it also after a update
Sorry guys I can't continue it
don't know why
Spamming the development section
Sorry for the flaming but he started not on me but on a great developer who's rom is the best here (sorry for claiming that too)
Sent from my GT-S5830i using xda premium
daxanh said:
NOOB. CWM and RZR need partitions in EXT4.
Click to expand...
Click to collapse
There is a better word. Newbie......try using that from now on please. And its a valid question asked at the wrong place...thats about it.
sent from GT S5830i. Running on Fraudcom Chipset.
Hi guys
I read about the model GT-S5839i is the same as GT-S5830i is true ?
Is possible change android to version 4.4.4 ? or bether then 2.3.6 ?
I try this procedure :
http://forum.xda-developers.com/galaxy-ace/s5830i-general/cm11-cooperve5830i-thread-cynogenmod-11-t2808268
but writing me this rom is for GT-S5830i and you have GT-S5839i
Than you for answer.
I think yes it will work in s5839i also
amolgosavi said:
I think yes it will work in s5839i also
Click to expand...
Click to collapse
How I change android ? any instruction or link ?
Go to that thread and follow instruction
I try this procedure :
http://forum.xda-developers.com/galaxy-ace/s5830i-general/cm11-cooperve5830i-thread-cynogenmod-11-t2808268
but writing me this rom is for GT-S5830i and you have GT-S5839i
I use CLOCKWORKMOD RECOVERY 6.0.1.2.
Please help ?
PS 5 hours i read and try find solution in XDA
DelBossco said:
I try this procedure :
http://forum.xda-developers.com/gal...1-cooperve5830i-thread-cynogenmod-11-t2808268
but writing me this rom is for GT-S5830i and you have GT-S5839i
I use CLOCKWORKMOD RECOVERY 6.0.1.2.
Please help ?
PS 5 hours i read and try find solution in XDA
Click to expand...
Click to collapse
I have a s5839i and cm11 is working fine. Replace s5839i to s5830i in build.prop or just flash cm7 then cm11
Also wrong section, please post in question&answer next time.
Cakawuete said:
I have a s5839i and cm11 is working fine. Replace s5839i to s5830i in build.prop or just flash cm7 then cm11
Also wrong section, please post in question&answer next time.
Click to expand...
Click to collapse
How i replace s5839i to s5830i in build.prop ?
For you is noob question but i need detailed description:
thank you so much
PS Sorry for wrong section ...
CLOCKWORKMOD RECOVERY 6.0.1.2 writing error message : "This package is for "cooperve,GT-S5830i,gt-s5830i" devices; this is a "GT-S5839i""
Edit file system\build.prop in zip file ? and change GT-S5830i to GT-S5839i ?
ro.product.model=GT-S5839i same result "This package is for "cooperve,GT-S5830i,gt-s5830i" devices; this is a "GT-S5839i""
I use this file cm-11-20140725-NIGHTLY-cooperve.zip
DelBossco said:
ro.product.model=GT-S5839i same result "This package is for "cooperve,GT-S5830i,gt-s5830i" devices; this is a "GT-S5839i""
I use this file cm-11-20140725-NIGHTLY-cooperve.zip
Click to expand...
Click to collapse
First flash any cm7 rom..u have to make ext4 system for that use multiformater then choose ext4..then flash biel cm7 kernel and then any cm7 rom..then boot..after that go to cwm and flash cm11 kernel and then reboot to recovery and then wipe everything and flash cm11..and use 19-07-2014 cm11 rom..
amolgosavi said:
First flash any cm7 rom..u have to make ext4 system for that use multiformater then choose ext4..then flash biel cm7 kernel and then any cm7 rom..then boot..after that go to cwm and flash cm11 kernel and then reboot to recovery and then wipe everything and flash cm11..and use 19-07-2014 cm11 rom..
Click to expand...
Click to collapse
Why use 19-07 ? The last (25-07) works better.
You can find cm7 here and cm7 specific kernel here. Flashing instructions are rovided in these threads.
Then flash cm11 kernel, reboot recovery (make sure it's 6.0.x.x version), mount /system and flash cm11 which you can find here.
Cakawuete said:
Why use 19-07 ? The last (25-07) works better.
You can find cm7 here and cm7 specific kernel here. Flashing instructions are rovided in these threads.
Then flash cm11 kernel, reboot recovery (make sure it's 6.0.x.x version), mount /system and flash cm11 which you can find here.
Click to expand...
Click to collapse
Becouse 25-07 build is mtd build..