Related
I got the monaco leather case for the 8125 from Extreme PDA:
http://www.extremepda.com/page/XPDA/PROD/cingular_8125_accessories/CING8125FLIPCASE
Even though a lot of people said they liked it and it seemed to be the most ideal for constant use, the bottom line is after a week I can't stand having it on my 8125. Here's what I realized:
- Even though it allows the keyboard to slide out, actually holding the device with the case flip behind it makes it tough to type comfortably.
- Folding back the flip every time I get a phone call and securing it in place is not practical.
- The cover inadvertantly causes the phone to either ignore or answer calls by applying pressure on the dial/hangup buttons. While this isn't an issue if the device is in standy, on an incoming call it is. Locking the device is useless because on an incoming call, the phone buttons are unlocked even if the device itself is locked.
After a week of this I finally gave up and took the 8125 out of the leather case. I am worried about it getting dropped/scratched but I just can't find a solution that's practical enough. How are the rest of you dealing with these issues?
yeah most people forget that it's a phone too and not just a pda. so having it in a case like that just makes it more work to answer calls and use the device.
I'm using the Mobile Glove Executice Black Tie Series holder. its a better design than the free case that comes with the 8125. The flap has a magnet in it so it closes really good. I bought it at a mall stand for $30 http://www.mobileglove.com/mobileglove.html it's design for the Treo 650 and similar handheld devices. it fits perfect
I purchased this case and am very happy with it. I don't experience any of the issues described by devGOD. http://cgi.ebay.com/Deluxe-Leather-...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've bought items from this person for other PDAs and highly recommend him. He also has some other cases for the 8125 available.
Geoffrey
Leather Cases
Hi there. The case listed above was my third case for the 8125. So far I like it the most. This is why I am still looking for a case. Taking it off and putting it on the belt clip is somewhat of a hassle because of the placement of the snap that keeps the thing closed. It gets in the way and it's making it hard to grab the phone in time to answer the ring. Also, using the keyboard is a little akward while it's in the case. Just take it out when at home but when out and about it gets a little tedious.
My next purchase might be the holster but at $30 it's a bit pricy.
Case to consider: Krusell Cabriolet
Here is what fit the bill for me.
http://sfplanet.com/product/87182
Use the phone/screen without any flaps. If you need to use the keyboard, it slides out easily. However, you can shake it upside down and it will stay put.
Krusell offers many choices for additional adaptors to fit your lifestyle. I bought and use their: Carabiner & Swivel Lanyard. I do like the belt clip one it came with - it is the easiest to remove that I've tried, but I don't like extra baggage around the waist.
Here is a link to a website that reviewed 8 cases.
http://www.4winmobile.com/htc-wizard-7-case-shootout-review-conclusion-vt1707.html
I'll look at one of those "deluxe leather cases" on ebay next. Just got a black metal PDAair case off ebay, trying it out. It's ok so far, not sure if it's a keeper. I'm used to having a metal case on my PDA, but I don't usually carry my PDA on my belt, so I'm not sure if I'll stick with it or go leather. I actually started to like the OEM pouch while I used it, but I want constant protection.
Has anyone tried the following case?
http://cgi.ebay.com/T-Mobile-MDA-PD...8QQihZ015QQcategoryZ15036QQrdZ1QQcmdZViewItem
out of my research, i'm beginning to believe that the case that offers the most protection, AND easy usage without much dabbling every time the phone rings seems to be:
http://cgi.ebay.com/Deluxe-Leather-...4QQihZ010QQcategoryZ15036QQrdZ1QQcmdZViewItem
can anybody post saying otherwise? I'm curious to see if anybody has tried it.
I wish those had black stitching, but that case is most likely my next canidate if I try another one.
My black pdair metal case is doing ok, though I had my first drop today, the stupid stud unscrewed from the back of the case. I was kind of worried about that when I got it, the screw was awfully shallow.
The best case is no case
Hi there:
I read the 8 case review and, after doing so, I purchased the Noreve model. It is a beautiful case. The problem is, for me, that I use my 8125 primarily as a phone, and then as a PDA. I also use it a fair amount with a GPS device. For the phone, I find it most useful OUT of the case. Or, sometimes, when it is in my car holder, it is also out of the case. When using GPS, it is out of the case (but secure).
The Noreve is beautifully made, but the 8125 inside of it is like a brick. I find it 'geeky' to use the case with the phone. In fairness, what I like about the Noreve is that the case folds BEHIND the unit when you are talking and therefore does not hang down like a big dog's tongue. You can also use the keyboard in the Noreve, but the device is not that securely inside of it.
The case I use almost everyday is a case I found on eBay. I prefer the horizontal case, although I believe there is a vertical model. It covers the device well enough, has holes for you to push the device out of the case while on your belt when the phone rings, and then allows you to easily slide the phone back in. The belt is secure, and it is fairly light weight. I used to carry my old iPaq in my suit pocket. The 8125 is just too heavy; it works much better on the waist.
It is cheap but durable and it works!
http://cgi.ebay.ca/Cingular-8125-Po...2766581QQihZ014QQcategoryZ15036QQcmdZViewItem
Oh, BTW, that deluxe case is the same case Brando has.
http://shop.brando.com.hk/bwdopod838leathercase.php
i ordered mine tonight. Given the insane amount of research ive done, i'm definitely sure this one is going to be the one with the least amount of risk to try. I'll let you guys know when all is said and done.
Lex, I know what you mean about spending insanely long hours researching cases, as I just went through it. In a fashion uncharacteric of the way I usually work, I ended up buying four cases: Sena Form-fit, Krusell Cabriolet, Krusell Handit, and Piel Frama. The latter is the model with the strap that allows using the keyboard without removal from the case.
I read the 8-case review over and over, and still couldn't decide. The Krusells were cheap, so I bought two on Ebay for a total of $40. I found the Piel Frama on Ebay for $50. I decided to keep the Piel Frama and Handit. Here are some observations:
Sena Form-fit: Very well-made, but has one big flaw: The magnetic closure, which otherwise I like very much, causes the device to fall out if the case is inverted on the clip. In the first week the MDA fell out twice with no damage, so I sold the case. Also, the belt clip was backordered for a month, and I don't know if that has been rectified.
Krusell Cabriolet: Okay, but leaves screen pointing outward and unprotected; same for top. With the swivel clip I was worried it would fall out like with the Sena issue above. I was nervous using it, so I returned it.
Krusell Handit: Nice, inexpensive, well-designed, and no big flaws. I'm keeping it. I would recommend this one for an expensive case that works very well and looks good, but the keyboard is not accessible without removing the device. The swivel belt clip sticks out a bit and flops around on your belt, which is a minor irritant.
Piel Frama: Well-made, very nice looking and stylish, and another keeper. This will be my main case, but it has some flaws, too:
1. The card slots are directly over the screen (no problems so far). A moderate blow might cause the cards to touch the screen, but I'm not sure if that's a real concern.
2. The flip tends to trip the top-front buttons, but I usually put my device in standby before closing the flip, so this isn't usually a problem.
3. Earpiece connector is difficult to negotiate. The hole doesn't line up precisely and the flip is hard to snap when it is inserted. This isn't a major problem.
Virtues include accessibility to the keyboard by just removing a small strap. Best looking case I've seen.
I've decided there is no perfect case, and the only way to determine which is best for you is spend two weeks researching like I did. The 8-case review previously cited is a good start, and if you want a Krusell or Piel Frama keep an eye out on Ebay. The Piel Framas are hard to find, and from the manufacturers site in Europe they are $75, but show up on Ebay from time to time. I was emailed last week with an offer for one like mine from an Ebay seller for only $46 shipped, so if anyone wants a Piel Frama with the strap, let me know. It may still be available.[/b]
Did anybody here buy the holster from the tmobile store that they have that the g1 supposedbly fits in?
its around 24$ i think.
It was closed by sort of 2 clip things.
i'm primarily looking for a horizntal belt holster...
any ideas?
i have the body glove, it is in that price range. love it if thats what your asking
Theres a magnetic one, that fits a sidekick, it's what i use.
Body Glove
I have the Body Glove also and it's great. Perfect for the person (like me) who is rough on phones. And it looks good too.
I purchased the crystal gel case from boxwave It covers the G1 completely and offers excellent protection for when you drop the phone. I also bought the niteize side belt case. It clips on your belt and the elastic allows it to expand enough for the phone with the gel case on it to fit.This case closes with velcro so there are no magnets to create problems.
I got the one from the T-Mobile store last week but it's not the up and down one. But I have to admit was worth the money (even though I didn't end up paying for it love the gf) The one I got sits sideways but very nice and fits the phone well. Was a little snug at first but about 2 days later the phone just slides in to the case very nice.
Chedderknight said:
Theres a magnetic one, that fits a sidekick, it's what i use.
Click to expand...
Click to collapse
I talked to a TMO rep at the store and said no accessories for G1 should have any magnets due to the compass feature. He advised that if you are going to use an aftermarket case, to make sure it doesn't have any magnets. The case TMO sells are magnet free for the G1.
As for the holster, I have it and though it fits the phone snug, be careful as the screen is facing out so make sure you have a screen protector.
I just bought my G1 last 2 weekends ago with a tmobile store belt clip, fits perfectly, sturdy rotating clip for horizontal or vertical placement, gets annoying having to take it out to text or open keyboard but otherwise perfect...24$
the pleather tmo horizontal case with attached clip. it's soft but not screen friendly soft on the inside so the screen protector is a must. great product though.
One warning. If you have a tendency to forget to snap the buttons, make sure you're using a hard or jelly shell to make the phone fit snugly. the basic stretchy straps on the sides are just barely too long to make the phone 100% secure IMHO without it.
i personally like this one.
http://www.fommy.com/view-full-page.asp?divid=T-Mobile&model=T-Mobile+G1&cat=Cases&skuno=82922
you can use it with the screen either facing out for in for screen protection.
I bought this one by Seidio. I had one just like it for my Blackberry 8820 and loved it. I love this one too.
http://www.g1depot.com/seidio-spring-holster/4A24A4902.htm
Buy a bodyglove that has a belt clip for your g1 phone. You won't need to buy a suction cup or dash holder for your g1.
I clip it to my rear view mirror after pushing back the rear view mirror tab. Then I close the tab. Stays in place and very sturdy. It's even easier to see since it is under the rear view mirror and safer too!
I also can use the belt clip to hang the phone off my laptop. I don't clip it, just use the space between the glove and clip to hang it.
Also, the rubbery glove protects your phone if you drop it.
Getting my TP2 tomorrow, but really wondering about this...
Seeing pictures of the leather 'case' that comes with the TP2 elsewhere than in the US, is it the same case without belt clip in the T-Mo US TP2?
If it is, I want to be ready when I pick up my phone to get a belt clip equipped case as well.
Yeah man... the US tp2 comes with a gay looking leather case that has no belt clip. It looks like you have a man purse imo
yeah a man purse that slides into your pocket
You guys weren't lying -- that thing is pathetic. I don't know what the heck HTC was thinking when they packaged that.
The T-Mobile guy was also full of crap when he said they had one with a belt clip. Looks like I'll be doing some shopping online.
Thanks for the heads up on that one!
yes the cases htc give are always junk. i like the bodyguardz skin cases simply because the phone is already kinda thick and it does protect the phone. kinda of a pain to put on but after my 4th attempt throughout the years i think i did my best on the touch pro 2.
nko, does the screen protector part feel rubbery and make the touch screen a little less sensitive? I know it is like that with the Zagg on my friend's iPhone.
Got this hard thick rubberized case at the tmo store. It comes with a snap in/out belt clip if wanted. Seems to fit tp2 very well, and leaves accessible all need openings.
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
i am still using the case my dash came with for my tp2, it fits.
I just bought me a $5 case with belt clip. I just have to cut a hole for the ear jack. I'm not spending $10+ for a case
freakingwilly said:
I just used the belt clip that came with my Wing. Fits like a glove!
Hand me downs FTW!
Click to expand...
Click to collapse
Yeah, I think I'm just gonna use the belt clip case that came with my Hermes. It's just a little longer but it fits for now.
Has anyone installed a full body screen protector like the bodyguardz ones? I saw this one on ebay: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370244520409&ssPageName=STRK:MEWAX:IT
But I bought this for the time being: http://cgi.ebay.com/for-HTC-TOUCH-P...ries?hash=item4399b91c94&_trksid=p3286.c0.m14 (from what I've heard, these pop off easily)
This is a very delicate process for me. It's a balance between too bulky and too little protection. I want it to be able to survive it's first dreaded drop without cracking the case. I may just try to use both of them at the same time. When I'm doing physical work, I'll put the rubber case on, and when I'm at the desk, just have it out with the clear protector. I just wonder if you can clip on the rubber housing over the clear protector. The perfect thing for me would be to just have a rubber skin that slides over the whole body of the phone because I don't slide the keyboard out much anyway. That way it could be protected when I'm on the move and I can easily take it off when not.
I also bought one of those generic belt clip holders for $5: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310161485996&ssPageName=STRK:MEWAX:IT I had one before and their alright. The loops on the back will secure the phone to you if you're moving around but the clip may sag overtime though. I know I'll be replacing it eventually. The HTC OEM cases are much better, but no loops. There's never a perfect solution.
BTW: Does anyone know if the rubber case from the Touch HD will fit?
^^Just ordered one of those this afternoon. Looks similar to one I had before but can't beat $5 and then about $.50 in cashback haha
Let's talk about the Spigen Snap On Case today... For those of you looking to buy this beautifully marketed case I would rethink your decision, but let me tell you exactly why first.
I purchased the case for my gf about two weeks ago and when it came in the mail I was stunned by how nice it looked and felt. The backing is smooth but has a slight texture to it, the case felt sturdy, and just like in the name snapped right on the phone perfectly. The only thing that bothered me was that it didn't fully cover the top and bottom.
So here we are two weeks later and the case has only had to endure 3 slight drops from about knee to hip height...
It's cracked on two corners with the corner closest to the camera button almost ripped all the way off and the corner closest to the power button poking your ear when the phone is in use. I've never seen a case that cost me $15+ break so easily, it's flaw is in it's sturdyness which is what seemed so attractive when I first inspected it and also in the corners which are the ends to the case. I believe if it fully encased the phone it would have faired a lot better.
So there you have it folks. My suggestion? Go with a TPU case, tried and tested these cases look, feel, and work beautifully. My only regret is that i could have gotten 2 TPU cases for the price i got the Spigen Snap On Case for.
Had this case also. Break within two days. The thin plastic strip above the volume buttons. Went with Otter Box Commuter. Just got it yesterday but so far really like it. Smaller and more compact then the defender.
starting this because i know there are some of us out there who require such a case. Thought we could save each other some time and/or grief and report what's available, what's shipping, what ad hoc solutions we've found, etc.
here's what i've found so far:
i-blason: liked it on N5. ships nov. 25
http://www.amazon.com/i-Blason-Kick...=1415220229&sr=8-2&keywords=nexus+6+belt+case
fosmon: never heard of them. looks like i-blason. ships dec. 1
http://www.amazon.com/Fosmon-STURDY...=1415220229&sr=8-7&keywords=nexus+6+belt+case
cellbee: never heard of them either. looks similar to the generic belt cases sold at verizon typically. ships nov. 25
http://www.amazon.com/dp/B00P1F0AX6?psc=1
supcase: i'll throw this one in here because it claims to be a belt case, but i see no evidence of this from either the pics or the description. ships nov. 29
http://www.amazon.com/SUPCASE-Full-...=1415220229&sr=8-1&keywords=nexus+6+belt+case
apparently this one is now shipping. first one to ship i believe
http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS
Good thread! I just pulled for the Moko. Not only is it supposed to be here Wed, it's a bit cheaper. I use a Steelie in the car and I don't like having the magnet on the phone and in my pocket so instead of having two cases I will just put the Steelie mount on the belt case clip and use it while in the car. For day-to-day I'll use the Moko and not have to worry about switching cases. I hope this works with Qi too.
The Steelie works great in the car as a mount. For the Moto X 2013 I can leave the case with the magnet on and NFC tap-to-pay works. With the OnePlus One, the magnet works great and NFC works but tap-to-pay will not work with the magnet in place. That means if I want to tap-to-pay I have to use a case without the Steelie. I think this Moko arrangement will work a lot better since I won't have to keep changing cases.
Just ordered the case from amazon referred to above.. For 6 bucks, free shipping with prime, and expedited delivery, it's worth giving it a shot. Seems to come in two parts, a protective case plus a seperate belt clip holster for sliding the device in and out of.
indianajonze said:
supcase: i'll throw this one in here because it claims to be a belt case, but i see no evidence of this from either the pics or the description. ships nov. 29
Click to expand...
Click to collapse
from the pics it looks to have a belt clip... the only thing im not to fancy on is the built in screen protector and its added size... everything else looks good IMHO
Seidio Convert
This case is not available or even announced yet, but I'm guessing it's probably in the works right now. In my opinion, Seidio makes the most rugged case for Nexus phones, called the Convert, which comes with a holster/belt clip. I had one for my N4, which got stolen :crying:, and currently have it on my N5 (pic below). If Otterbox had made their Defender case for my Nexuses, I probably would have gotten that instead. The Convert has no built in screen protector and is kind of pricey, but has major protection.
Seidio Convert for Nexus 5:
http://www.seidioonline.com/lg-google-nexus-5-convert-value-pack-black-p/bd5-hkr4lgn5.htm
seidio is mia. i ve emailed them a dozen times with nothing more than "we're looking into it". can't wait. got the moko case and it looks like a winner, esp for $2
I ordered the moko for 2 dolla. Mainly just for when I'm at work. I ordered a dbrand skin for the back too. Hopefully it won't interfere with the case fitting. If it does...the case was 2 dollars. Lol.
actually...that moko case is a damn fine case. looks like it will do everything i need it to do. of course, i don't have the fn nexus 6 yet to test it in the field, but it looks like it'll do the job just fine. best $2 case EVER...
I would love seidio to make a case for the nexus 6 but all I got was the generic response too. " we are looking in to it". Its too bad because I love their spring clip on their holsters. I looked into moko and unicorn beetle but didn't like the release of either if them. The spring clip from seidio is the best.
received the i-blason case today. i thought it was identical to the moko case but there are several key differences to note:
1. rubber section is far thicker and of a better quality than the moko. the moko was driving me crazy with the amount of dust it was attracting. this one is a much harder/more durable rubber. it's MUCH better
2. having said that, because its thicker, the buttons are a bit harder to press, particularly the power. works perfectly mind you, just takes a bit more effort to press
3. the hard shell is slicker than the moko. hopefully this will wear off soon as its fairly slippery as it stands now
4. the belt clip section is a clip in rather than a slide in. only got it tonight so i have yet to try it in the field. seems secure enough, though not as secure as the slide in of the moko. the advantage here though is i can take this out of the clip MUCH faster than the moko
5. if you have the moko, you can use this on the moko slide in belt clip if you prefer. i'm going to try the clip in holster for a bit to see how i like it
overall, a very solid alternative to the moko, particularly if you were getting annoyed by the cheap rubber collecting dirt
I got the SupCase Unicorn Beetle from amazon on sell for $12 taxes n shipped yesterday, actually received my nexus yesterday too. I got that price because the case wasn't out yet when I ordered it so it had them listed for $7.99 at the time.
So far I am very impressed with the quality. The built in screen protector is actually useful and doesn't hinder the screen at all. I did notice a bit of glare under certain lighting but nothing too annoying.
It does come with a belt clip and its a bit different from what I had on my note 2 but so far its functional and very sturdy product. Highly recommend.
well seidio finally has a nexus 6 page now. still coming soon and notify me crap, but its a start i guess
http://www.seidioonline.com/Google-Nexus-6-s/9492.htm
indianajonze said:
well seidio finally has a nexus 6 page now. still coming soon and notify me crap, but its a start i guess
http://www.seidioonline.com/Google-Nexus-6-s/9492.htm
Click to expand...
Click to collapse
i really hope for a Seidio Dilex and holster combo!
Combination
I like to show off my Nexus and I have had too many bad experiences with belt clips with single clips. My combo is this Spigen case http://www.amazon.com/gp/product/B00OH4I7UU/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5 and this holster http://www.amazon.com/Nexus-Holster-Pouch-Protector-Cover/dp/B00OX3Z89S/ref=sr_1_7?ie=UTF8&qid=1419472114&sr=8-7&keywords=case+for+belt+nexus+6
G1Master said:
I got the SupCase Unicorn Beetle from amazon on sell for $12 taxes n shipped yesterday, actually received my nexus yesterday too. I got that price because the case wasn't out yet when I ordered it so it had them listed for $7.99 at the time.
So far I am very impressed with the quality. The built in screen protector is actually useful and doesn't hinder the screen at all. I did notice a bit of glare under certain lighting but nothing too annoying.
It does come with a belt clip and its a bit different from what I had on my note 2 but so far its functional and very sturdy product. Highly recommend.
Click to expand...
Click to collapse
Just ordered one. Cannot wait for it to arrive. I have had a UAG case on it since day one and I cannot take photos with the flash on. It leaves a smoky affect in the photos. How are photos with the flash on with the supcase?
seidio cases are shipping. black surface case/clip combo anyway. all other colors are coming soon still. just ordered mine
http://www.seidioonline.com/motorola-nexus-6-surface-kickstand-combo-black-p/bd2-hr3mtn6k-bk.htm
indianajonze said:
seidio cases are shipping. black surface case/clip combo anyway. all other colors are coming soon still. just ordered mine
http://www.seidioonline.com/motorola-nexus-6-surface-kickstand-combo-black-p/bd2-hr3mtn6k-bk.htm
Click to expand...
Click to collapse
Please, if you have any other cases laying around, let us know if the holster would work with the Surface holster. On past phones, I know I could get other cases (not all) to work with Surface and Dilex holsters. I have the Supcase hybrid case now. If Amazon were selling the holster, Id buy it in a heartbeat to test, because I know I could easily return it to Amazon.
I got my Unicorn Beetle Pro this past monday and I'm impressed with the quality. The only real complaint that I have about it is that they didnt flatten out the back of the case so that the phone lays flat on a table or something. Most annoying thing ever to lay your phone on the desk and try to do something on it only to have it start wobbling away.
crackberry.com has the seidio active case for 31.95, ships 1/22, use coupon code JB15 for 10% off NOTE. The cases and holsters are sold seperately, great if you just want the holster, or just the case.
http://shop.crackberry.com/nexus-6-cases-browse.htm