I downloaded and installed max payne on my mediapad but when I start game I cant see touch buttons (fire, bullet time, pause,etc.) so I can only move...how to fix this problem?
I have same problem :/
It looks like this http://dl.dropbox.com/u/32486460/Screenshot_2012-06-14-16-45-21.png
I hope it will be fixed in future update
I have the exact same problem except I'm using a i717 and a dual action logitech controller. The only time you can shoot is when you unplug and replug the controller, then the touch pad shows up. Press the trigger and it'll work but as soon as you hit any other key, it stops working again. So did you find a solution yet?
Related
I use the app while running an emulator and suddenly the phone just slows down to a crawl it drops from 50fps to 2fps and if u wait the problem goes away but u can't use the controller anymore. Then I turn off Bluetooth but when I trie to turn it back on it just hangs on turning on. Anyone else having this issue?
Sent from my X10i using XDA App
I was having the same problem.i needed to restart phone after it disconnected each time. It doesn't seem fully compatible with our phones yet i think it was on version 0.1 so ill give it a while for next version and give that a go. Even when i could get the controller connected to the phone and mapped the keys in an emulator the it wouldn't work during actual game play. i could browse through the launcher with it thou, which was err... different?
I have a Lenovo IdeaTab S6000 and I recently purchased the Red Samurai/GameStop V2 branded Bluetooth controller and I'm finding that when I connect the controller, a mouse cursor appears on screen that can be semi-controlled via the analog sticks. This essentially causes none of the compatible games for the controller to improperly function. Within my tablets setting menu is an option to change a mouse's cursor speed (something not present on my HTC One, which the controller works perfectly on) and I was wondering if this option could be a factor in the overall problem and if disabling this option is possible. I have spent the past two days trying to remedie this problem and have had no luck so any kind of support would be greatly appreciated.
Also, this being my first post, I apologize in advance if this was posted in the wrong area.
widower said:
I have a Lenovo IdeaTab S6000 and I recently purchased the Red Samurai/GameStop V2 branded Bluetooth controller and I'm finding that when I connect the controller, a mouse cursor appears on screen that can be semi-controlled via the analog sticks. This essentially causes none of the compatible games for the controller to improperly function. Within my tablets setting menu is an option to change a mouse's cursor speed (something not present on my HTC One, which the controller works perfectly on) and I was wondering if this option could be a factor in the overall problem and if disabling this option is possible. I have spent the past two days trying to remedie this problem and have had no luck so any kind of support would be greatly appreciated.
Also, this being my first post, I apologize in advance if this was posted in the wrong area.
Click to expand...
Click to collapse
I too would like some help with this. Exact same scenario.
ixiduffixi said:
I too would like some help with this. Exact same scenario.
Click to expand...
Click to collapse
Necroposting, but I figured I'd add to the conversation:
The only gamepad that I've gotten to work with this device (as a gamepad) is the Moga Hero. Connecting was always finicky at best and would require a full reboot, and immediately connect when it powers up. Otherwise it wouldn't pair at all.
I've tried the Red Samurai v2, the Nyko Playpad, and most recently the Mad Catz C.T.R.L.R. Invariably, the mouse mode works and works very well, but the gamepad mode always does what was written above.
In trying the xbox 360 gamepad, it blinks but doesn't connect.
As a lark, I purchased a Asus MeMo 7" HD tablet which has the same MediaTek chipset (8125) and the same exact problem exists with that device too (mouse mode works, no gamepad). Both the Memo and the Lenovo tabs are on the same version of Android (4.2.2) and the same kernel (3.4.5) on the stock rom. I assume it's Mediatek's fault, in which case HID gamepads are a no go on these devices.
Unless someone has other information, which would be much appreciated.
Oh, wanted to add something: when the C.T.R.L.R. connects in gamepad mode, you get only a cursor. When I connect my bluetooth keyboard, the multimedia controls start working. Not sure why that is.
I have a problem with the mapping stuff, ok so i installed bluez ime cuz it didnt work with ipega game center app. And now i start it off by entering joystick mode and connecting it via bluetooth to my LF Optimus f6 lte(4.1.2 version android) and it responds ok. But the button mapping is all wrong, for instance i press Y button it maps it as L1 and as far as L1 goes it doesnt respond. Nor does r1 respond. I have the problem with the epsxe emulator aswell. Joystick mode is ****ed up in general. So i hook it up in icade mode and i manage to map it somehow, and now my characters start running into the wall my themselves, it happens in every game. the characters just walk on their own in 1 direction, its annoying. Im hoping someone can share some knowledge on the topic and provide me with a solution? Be that teaching me how to use joystick mode(if im doing something wrong) or fixing the issues in icade mode with characters running into wall. Doesnt matter which, id just like to start using the controller on emulator and im hoping for correct mapping.
I was using my wireless Logitech desktop set but I noticed some lag after not using it for some seconds. When I keep using the mouse or keyboard there is no problem and everything works fine. But when I stop typing or stop mousing for longer than three seconds, the tablet doesn't recognize any input anymore. When I move the mouse or use the keyboard, nothing happens, but after two seconds any input is recognized again.
So I have to keep typing or else I have to wait some seconds to let the tablet recognize any input. This is unworkable.
I tested it with two desktop sets with two different Unifying receivers. When I use a corded mouse or keyboard, everything's fine. It seems to me that there is some sort of logitech standby mode which the tablet can't handle or something.
What can I do abaout this?
Added logcat of connecting usb, a freeze moment, and the disconnection. But I see nothing wrong there...
http://pastebin.com/fisK3hQ0
I bought an other Logitech Wireless mouse (standard receiver, no Unify) and that one works perfectly. So it looks like it has something to do with Unify, not wireless in particular.
Anyone?!
The Shield tablet has the same issue:
https://forums.geforce.com/default/...quot-delayed-input-after-inactivity/?offset=2
Maybe it has something to do with the Tegra K1?
farris said:
The Shield tablet has the same issue:
https://forums.geforce.com/default/...quot-delayed-input-after-inactivity/?offset=2
Maybe it has something to do with the Tegra K1?
Click to expand...
Click to collapse
It is really annoying. My Shield Tablet is fantastic, except for this issue with the keyboard/mouse. Sad panda.
scotte9999 said:
It is really annoying. My Shield Tablet is fantastic, except for this issue with the keyboard/mouse. Sad panda.
Click to expand...
Click to collapse
And no solutions yet. Maybe a different kernel will work, but I like to keep my N9 stock (the first months hehehe)
Any solution?
Has there been any solution to this issue yet? I too am having the same problem.
Work Around
I have a work around that seems to fix this issue. For this to work you will need to be root. Also note that this solution will cause all USB devices to remain on at all times and will not survive a reboot. My experience is mostly with linux and very little with android. I expect someone should be able to modify the following script fairly easily for a more permanent solution.
Open your favorite terminal emulator and type the following four commands pressing enter after each:
su
for i in /sys/bus/usb/devices/*/power/control;
do echo on > $i;
done
This script toggles the power control setting for all usb devices from the auto state to always on. Hope this helps!
I have a slight lag with my logitech controller through USB OTG. It's just a split second lag, but it's there right from when you plug it in. Makes it unusable for gaming. No issues whatsoever with my Logitech bluetooth keyboard however.
I have a X10 MAX kingnovel android 9 tv box basically a generic s905x3 soc with 4gb ram and 32gb rom, any way specs aside it will not use the enter key and enter is set in keylayout to 28 key so no idea what i can do here and the question mark key is not working either backspace works fine and esc does not, it is a wireless usb microsoft wireless 3000 v2.0 model keyboard it won't detect as a hardware keyboard in settings for the keyboards to be chosen but it does function half functions any way without the enter it's what i deem half functional? It also forces me to use a on screen keyboard because of that to use enter with a mouse very very irritating.
It is rooted just checked that and also the other issue the mad catz mojo ctrl controller does not also work on bluetooth it causes bluetooth to lock up when paired and does not function if i switch it to the usb adaptor wchich is wifi i think? that works fine then but in say gta san andreas the pad is perfect yet use it in max payne also a rockstar game it won't work with the fire button or bullet time buttons all the turning and change weapon funtions are fine, dead trigger 2 maps alright to.
What i know as well is if i search in the browser address bar in some browsers and try the regular enter key on the keyboard it does not work yet using enter on the numpad will but not when using the main search bar in a google search only in the address bar any ideas how to resolve these issues please anyone thanks in advance