Related
I found this:
http://forum.xda-developers.com/showthread.php?t=1483193
Can someone do this pls
???????
Sent from my Dell Streak using XDA App
DISCLAIMER:This is not my work,. i am just reposting
Requirement:
1. decompiled Framework.jar with Baksmali manager
2. decompiled SystemUI.apk with APK Multi Tool
3. Some Basic understanding about editing xml file and smali code.
4. WinMerge or other comparison tool (to better editing and comparing with my sample file)
5. Backup the framework.jar and SystemUI.apk first!
Files to be edited:
in SystemUI.apk
res/anim/
res/layout/status_bar_latest_event.xml
res/values/public.xml
smali/com/android/systemui/statusbar/LatestItemContainer$1.smali
smali/com/android/systemui/statusbar/LatestItemContainer.smali
smali/com/android/systemui/statusbar/StatusBarService$7.smali (or depends on your numbering, could be $8 or larger)
smali/com/android/systemui/statusbar/StatusBarService.smali
in framework.jar:
smali/com/android/internal/statusbar/IStatusBarService$Stub$Proxy.smali
smali/com/android/internal/statusbar/IStatusBarService$Stub.smali
smali/com/android/internal/statusbar/IStatusBarService.smali
UPDATE: This is the additional guide for other device when editing StatusBarService.smali. See here:
1. HTC based
2. Samsung based
Alright, let's mod one by one
1. Editing SystemUI.apk
1.1 Editing res/anim
We are registering anim object here, so swipe animation can be done.
Create folder anim (if not exists yet) inside /res folder
Create 2 file named slide_out_left_basic.xml and slide_out_right_basic.xml inside res/anim folder
for slide_out_left_basic.xml, edit the file and fill with this
Code:
<?xml version="1.0" encoding="utf-8"?>
<translate android:duration="@android:integer/config_mediumAnimTime" android:fromXDelta="0.0" android:toXDelta="-100.0%p"
xmlns:android="http://schemas.android.com/apk/res/android" />
for slide_out_right_basic.xml, edit the file and fill with this
Code:
<?xml version="1.0" encoding="utf-8"?>
<translate android:duration="@android:integer/config_mediumAnimTime" android:fromXDelta="0.0" android:toXDelta="100.0%p"
xmlns:android="http://schemas.android.com/apk/res/android" />
Save both
1.2 Editing res/layout/status_bar_latest_event.xml
We are replacing LinearLayout object used in StatusBar with LatestItemContainer here, so notification can be removed. We handle the Styling first by editing this .xml first. Here are the steps:
Change the code from Original code to this (change the bold one)
Code:
<?xml version="1.0" encoding="utf-8"?>
<com.android.systemui.statusbar.LatestItemContainer androidrientation="vertical" android:layout_width="fill_parent" android:layout_height="65.0sp"
xmlns:android="http://schemas.android.com/apk/res/android">
<com.android.systemui.statusbar.LatestItemView android:id="@id/content" android:background="@android:drawable/status_bar_item_background" androidaddingRight="6.0sp" android:focusable="true" android:clickable="true" android:layout_width="fill_parent" android:layout_height="64.0sp" android:shadowColor="#ff000000" android:shadowDx="0.0" android:shadowDy="1.0" android:shadowRadius="2.0" />
<View android:background="@drawable/divider_horizontal_light_opaque" android:layout_width="fill_parent" android:layout_height="wrap_content" />
</com.android.systemui.statusbar.LatestItemContainer>
Save
1.3 Editing res/values/public.xml
This one is for registering anim file that we made on step 1.1 to be available publicly and to be recognized in .smali program. Here are the steps:
Add this code to the file like this before XML main body ends:
Code:
<resources>
.
.
.
<public type="anim" name="slide_out_left_basic" id="0x7f0c0000" />
<public type="anim" name="slide_out_right_basic" id="0x7f0c0001" />
</resources>
Please note that id should be unique for every line item so adjust the anim id accordingly. If you don't know how, just leave it, do a compile and decompile again and the id will be added automatically. Thanks to LeoMar for the tip!
Remember the Anim ID, save it for editing LatestItemContainer$1.smali
Save
1.4 Adding smali/com/android/systemui/statusbar/LatestItemContainer$1.smali and smali/com/android/systemui/statusbar/LatestItemContainer.smali
This is the class of LatestItemContainer that will be used to handle the notification list instead of LatestItemView. Here are the steps:
Please download from the attachment
insert the files inside to mentioned folder above
Inside LatestItemContainer$1.smali, there's an id that references the anim from step1.2. please edit it if you have different id for anim left or anim from previous step.
Code:
.line 53
:cond_0
const/high16 v1, 0x7f0c
and
Code:
.line 51
const v1, 0x7f0c0001
1.5 Add smali/com/android/systemui/statusbar/StatusBarService$7.smali (or depends on your existing framework numbering, could be $8 or larger)
This is additional function for StatusBarService to handle onClearNotification function. Here are the steps:
Extract the StatusBarService$7.smali from attachment
If StatusBarService$7.smali does not exist before, just place it inside, if not, skip this step.
If StatusBarService$7.smali exists, Please rename the file to StatusBarService$8.smali (or whatever higher number that is unused) and rename all the line inside the file from
Code:
StatusBarService$7
to
Code:
StatusBarService$8
1.6 Edit smali/com/android/systemui/statusbar/StatusBarService.smali
UPDATE: This is the additional guide for other device when editing StatusBarService.smali. See here:
1. Generic java readout
2. HTC based
3. Samsung based
This is the file that generate NotificationView. Please take care of the changes here more carefully because there might be some differences between vendors in this file. Here are the steps:
Open StatusBarService.smali and find this function
Code:
.method makeNotificationView(Lcom/android/internal/statusbar/StatusBarNotification;Landroid/view/ViewGroup[Landroid/view/View;
Find this code in the makeNotificationView function body:
Code:
invoke-virtual {v0, v1, v2, v3}, Landroid/view/LayoutInflater;->inflate(ILandroid/view/ViewGroup;Z)Landroid/view/View;
move-result-object v18
const v4, 0x7f0b0014
move-object/from16 v0, v18
move v1, v4
invoke-virtual {v0, v1}, Landroid/view/View;->findViewById(I)Landroid/view/View;
move-result-object v10
Insert the bold code below between the existing code:
Code:
invoke-virtual {v0, v1, v2, v3}, Landroid/view/LayoutInflater;->inflate(ILandroid/view/ViewGroup;Z)Landroid/view/View;
move-result-object v18
check-cast v18, Lcom/android/systemui/statusbar/LatestItemContainer;
.line 516
.local v18, row:Lcom/android/systemui/statusbar/LatestItemContainer;
move-object/from16 v0, v16
iget v0, v0, Landroid/app/Notification;->flags:I
move v4, v0
and-int/lit8 v4, v4, 0x2
if-nez v4, :cond_swno
move-object/from16 v0, v16
iget v0, v0, Landroid/app/Notification;->flags:I
move v4, v0
and-int/lit8 v4, v4, 0x20
if-nez v4, :cond_swno
new-instance v4, Lcom/android/systemui/statusbar/StatusBarService$7;
move-object v0, v4
move-object/from16 v1, p0
move-object/from16 v2, p1
invoke-direct {v0, v1, v2}, Lcom/android/systemui/statusbar/StatusBarService$7;-><init>(Lcom/android/systemui/statusbar/StatusBarService;Lcom/android/internal/statusbar/StatusBarNotificationV
move-object/from16 v0, v18
move-object v1, v4
invoke-virtual {v0, v1}, Lcom/android/systemui/statusbar/LatestItemContainer;->setOnSwipeCallback(Ljava/lang/RunnableV
.line 735
:cond_swno
const v4, 0x7f0b0014
move-object/from16 v0, v18
move v1, v4
invoke-virtual {v0, v1}, Lcom/android/systemui/statusbar/LatestItemContainer;->findViewById(I)Landroid/view/View;
move-result-object v10
Once again, change
Code:
StatusBarService$7
to
Code:
StatusBarService$8
line if you happened to have StatusBarService$8.smali as the result of renaming on the previous step.
IMPORTANT LOGIC TO BE UNDERSTOOD: This step tells the function to:
1. cast the already made View Object to LatestItemContainer instead of using LatestView class.
2. Filter if the Notification is removable or not
3. the LatestItemContainer object (v18) is assigned with onSwipeCallback(new StatusBarService$7)
Change the following (still on the same function body):
Code:
move v1, v4
invoke-virtual {v0, v1}, Landroid/view/View;->setDrawingCacheEnabled(Z)V
.line 542
const/4 v4, 0x3
to
Code:
move v1, v4
invoke-virtual {v0, v1}, Lcom/android/systemui/statusbar/LatestItemContainer;->setDrawingCacheEnabled(Z)V
.line 542
const/4 v4, 0x3
Please note:
StatusBarService.smali might be different between vendor, so please adapt with your .smali to implement the above coding.
2. Editing framework.jar
2.1 editing smali/com/android/internal/statusbar/IStatusBarService$Stub.smali
Here are the steps:
Add this code on variable declaration part inside the file
Code:
.field static final TRANSACTION_onClearAllNotifications:I = 0xb
.field static final TRANSACTION_onNotificationClear:I = 0xc
.field static final TRANSACTION_onNotificationClick:I = 0x9
.field static final TRANSACTION_onNotificationError:I = 0xa
If the 0xc is already used on another static value, you must change it so it remains unique.
Find this code:
Code:
.method public onTransact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
.registers 14
.parameter "code"
.parameter "data"
.parameter "reply"
.parameter "flags"
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.prologue
.line 39
sparse-switch p1, :sswitch_data_124
change to
Code:
.method public onTransact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
.registers 14
.parameter "code"
.parameter "data"
.parameter "reply"
.parameter "flags"
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.prologue
.line 39
sparse-switch p1, :sswitch_data_13e
Insert/replace this code (it is at the end of the file):
Code:
.line 176
const/4 v0, 0x1
goto/16 :goto_7
.line 39
:sswitch_data_124
.sparse-switch
0x1 -> :sswitch_f
0x2 -> :sswitch_1c
0x3 -> :sswitch_29
0x4 -> :sswitch_42
0x5 -> :sswitch_5f
0x6 -> :sswitch_7b
0x7 -> :sswitch_8d
0x8 -> :sswitch_c7
0x9 -> :sswitch_d5
0xa -> :sswitch_ef
0xb -> :sswitch_116
0x5f4e5446 -> :sswitch_8
.end sparse-switch
to
Code:
.line 176
const/4 v0, 0x1
goto/16 :goto_7
.end local v1 #_arg0:Ljava/lang/String;
.end local v2 #_arg1:Ljava/lang/String;
.end local v3 #_arg2:I
:sswitch_124
const-string v0, "com.android.internal.statusbar.IStatusBarService"
invoke-virtual {p2, v0}, Landroid/os/Parcel;->enforceInterface(Ljava/lang/StringV
.line 177
invoke-virtual {p2}, Landroid/os/Parcel;->readString()Ljava/lang/String;
move-result-object v1
.line 178
.restart local v1 #_arg0:Ljava/lang/String;
invoke-virtual {p2}, Landroid/os/Parcel;->readString()Ljava/lang/String;
move-result-object v2
.line 179
.restart local v2 #_arg1:Ljava/lang/String;
invoke-virtual {p2}, Landroid/os/Parcel;->readInt()I
move-result v3
.line 180
.restart local v3 #_arg2:I
invoke-virtual {p0, v1, v2, v3}, Lcom/android/internal/statusbar/IStatusBarService$Stub;->onNotificationClear(Ljava/lang/String;Ljava/lang/String;I)V
.line 181
invoke-virtual {p3}, Landroid/os/Parcel;->writeNoException()V
.line 182
const/4 v0, 0x1
goto/16 :goto_7
.line 39
:sswitch_data_13e
.sparse-switch
0x1 -> :sswitch_f
0x2 -> :sswitch_1c
0x3 -> :sswitch_29
0x4 -> :sswitch_42
0x5 -> :sswitch_5f
0x6 -> :sswitch_7b
0x7 -> :sswitch_8d
0x8 -> :sswitch_c7
0x9 -> :sswitch_d5
0xa -> :sswitch_ef
0xb -> :sswitch_116
0xc -> :sswitch_124
0x5f4e5446 -> :sswitch_8
.end sparse-switch
it's important to note this
Code:
0xc -> :sswitch_124
If you rename the static at the previous steps, please change the 0xc accordingly.
2.2 Editing smali/com/android/internal/statusbar/IStatusBarService$Stub$Proxy.smali
Here are the steps:
Insert these function code to the file:
Code:
.method public onNotificationClear(Ljava/lang/String;Ljava/lang/String;I)V
.registers 9
.parameter "pkg"
.parameter "tag"
.parameter "id"
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.prologue
.line 359
invoke-static {}, Landroid/os/Parcel;->obtain()Landroid/os/Parcel;
move-result-object v0
.line 360
.local v0, _data:Landroid/os/Parcel;
invoke-static {}, Landroid/os/Parcel;->obtain()Landroid/os/Parcel;
move-result-object v1
.line 362
.local v1, _reply:Landroid/os/Parcel;
:try_start_8
const-string v2, "com.android.internal.statusbar.IStatusBarService"
invoke-virtual {v0, v2}, Landroid/os/Parcel;->writeInterfaceToken(Ljava/lang/StringV
.line 363
invoke-virtual {v0, p1}, Landroid/os/Parcel;->writeString(Ljava/lang/StringV
.line 364
invoke-virtual {v0, p2}, Landroid/os/Parcel;->writeString(Ljava/lang/StringV
.line 365
invoke-virtual {v0, p3}, Landroid/os/Parcel;->writeInt(I)V
.line 366
iget-object v2, p0, Lcom/android/internal/statusbar/IStatusBarService$Stub$Proxy;->mRemote:Landroid/os/IBinder;
const/16 v3, 0xa
const/4 v4, 0x0
invoke-interface {v2, v3, v0, v1, v4}, Landroid/os/IBinder;->transact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
.line 367
invoke-virtual {v1}, Landroid/os/Parcel;->readException()V
:try_end_21
.catchall {:try_start_8 .. :try_end_21} :catchall_28
.line 370
invoke-virtual {v1}, Landroid/os/Parcel;->recycle()V
.line 371
invoke-virtual {v0}, Landroid/os/Parcel;->recycle()V
.line 373
return-void
.line 370
:catchall_28
move-exception v2
invoke-virtual {v1}, Landroid/os/Parcel;->recycle()V
.line 371
invoke-virtual {v0}, Landroid/os/Parcel;->recycle()V
throw v2
.end method
Please inspect the code for this part:
Code:
const/16 v3, 0xa
const/4 v4, 0x0
invoke-interface {v2, v3, v0, v1, v4}, Landroid/os/IBinder;->transact(ILandroid/os/Parcel;Landroid/os/Parcel;I)Z
The bold one must match on one of the switch case value at the end of IStatusBarService$Stub.smali,
in my phone actually the valid one is the TRANSACTION_onNotificationError (0xa) so if your NotificationError is not 0xa but 0xb for example, please change the bold one to 0xb
Save
2.3 editing smali/com/android/internal/statusbar/IStatusBarService.smali
Insert this function code to the file. Here are the steps:
Insert these function code to the file:
Code:
.method public abstract onNotificationClear(Ljava/lang/String;Ljava/lang/String;I)V
.annotation system Ldalvik/annotation/Throws;
value = {
Landroid/os/RemoteException;
}
.end annotation
.end method
Save
There you have it AFAIK, the files that you need to take care more than others are:
1. smali/com/android/systemui/statusbar/StatusBarService.smali
2. res/values/public.xml
The rest can be applied from the attachment below directly. Ok that's all, after you are done, compile both SystemUI.apk and Framework.jar.
How to Compile the right way?
1. SystemUI.apk ->
Compile with APK Multi Tool, press y and y twice with all the requested input,
delete modified file from keep folder, and after that continue compiling.
Copy from original APK the META-INF and AndroidManifest.xml to the unsignedSystemUI.apk
rename unsignedSystemUI.apk to signedSystemUI.apk
select Zipalign from APK Multi Tool to optimize apk.
Rename to SystemUI.apk (move the original one just in case)
2. framework.jar ->
Smali inside Baksmali Manager
Replace classes.dex inside framework.jar with the generated one.
and apply on your phone
mother of god... one hell of a reply!
crashDebug said:
mother of god... one hell of a reply!
Click to expand...
Click to collapse
?
Sent from my Dell Streak using XDA App
I think it would be great if someone could do this for those of us who don't understand coding.
It's much better in sony Ericsson forum as Xperia mini pro is my second phone
devs There are willing to help but here nobody wills to help.
I already tried this but compiling back was error
Sent from my Dell Streak using XDA App
Mo one ???
Sent from my SK17i using XDA App
This is how to disable signature checks using seo's code that has been around forever, now for the EVO LTE on ICS.
Gonna loosely quote SteelH's [How To] post opener:
This reference guide is to tell you what to edit to disable Signature Checks for the EVO 4G LTE in Services.jar. It is not an all-inclusive how-to on adb, decompiling/recompiling apks, etc. There are already several very good sources right here on XDA for that information.
Decompile Services.jar and look for \com\android\server\pm\PackageManagerService.smali
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
.locals 7
if-nez p0, :cond_8
if-nez p1, :cond_6
const/4 v6, 0x1
:goto_5
return v6
:cond_6
const/4 v6, -0x1
goto :goto_5
:cond_8
if-nez p1, :cond_c
const/4 v6, -0x2
goto :goto_5
:cond_c
new-instance v3, Ljava/util/HashSet;
invoke-direct {v3}, Ljava/util/HashSet;-><init>()V
move-object v0, p0
array-length v2, v0
const/4 v1, 0x0
:goto_14
if-ge v1, v2, :cond_1e
aget-object v5, v0, v1
invoke-virtual {v3, v5}, Ljava/util/HashSet;->add(Ljava/lang/Object;)Z
add-int/lit8 v1, v1, 0x1
goto :goto_14
:cond_1e
new-instance v4, Ljava/util/HashSet;
invoke-direct {v4}, Ljava/util/HashSet;-><init>()V
move-object v0, p1
array-length v2, v0
const/4 v1, 0x0
:goto_26
if-ge v1, v2, :cond_30
aget-object v5, v0, v1
invoke-virtual {v4, v5}, Ljava/util/HashSet;->add(Ljava/lang/Object;)Z
add-int/lit8 v1, v1, 0x1
goto :goto_26
:cond_30
invoke-virtual {v3, v4}, Ljava/util/HashSet;->equals(Ljava/lang/Object;)Z
move-result v6
if-eqz v6, :cond_38
const/4 v6, 0x0
goto :goto_5
:cond_38
const/4 v6, -0x3
goto :goto_5
.end method
Do a whole-sale .method change and replace the entire .method with this one:
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
.locals 7
const/4 v0, 0x0
return v0
.end method
p.s. you will notice that there is no .line numbers and the .registers are now .locals, that is because I use a different baksmali cmd than what is the norm. I use:
Code:
java -Xmx1024M -jar baksmali.jar -l -b -o smali/ classes.dex
notice the extra -l -b
the -l(thats a lower case L not and upper case i) changes the .registers to .locals and the -b removes the smali debugging stuff that is not needed. Most custom rom builders know about this edits but this is for the average user that would like to make edits on their own and want to make edits to system/apps.
One_Love
In what situation would this fix be applicable?
gpz1100 said:
In what situation would this fix be applicable?
Click to expand...
Click to collapse
This is for anyone that wants to edit a /system/app and not want to re-sign their rom so that the framework and system apps have the same signatures. As i stated in the OP this is already done by many rom devs but this is for anyone that wants to make their own rom/edits. If this edit isn't done and signatures dont match on /system/apps then there will be problems, like not working/showing up, that sorta thing.
one_love_420 said:
This is for anyone that wants to edit a /system/app and not want to re-sign their rom so that the framework and system apps have the same signatures. As i stated in the OP this is already done by many rom devs but this is for anyone that wants to make their own rom/edits. If this edit isn't done and signatures dont match on /system/apps then there will be problems, like not working/showing up, that sorta thing.
Click to expand...
Click to collapse
So sorry to seem dumb here but I have a oxed version so I can't decompile (which I dont know how to do anyway but I am sure there are tons of tutorials out there) But does anyone have this done for the stock services.jar?
When to do your baksmali lines?
There wrote class.dex so after editing?
If before there's no class.dex yet, only jar.
zhuhang said:
When to do your baksmali lines?
There wrote class.dex so after editing?
If before there's no class.dex yet, only jar.
Click to expand...
Click to collapse
You answered your own question... Decompile the .jar, make your smali edits, recompile .jar and voila its done.
Sent from my EVO using Xparent Blue Tapatalk 2
zhuhang said:
When to do your baksmali lines?
There wrote class.dex so after editing?
If before there's no class.dex yet, only jar.
Click to expand...
Click to collapse
I'm not quite sure what this says? But "I think" what you're asking is you have no classes.dex in the .jar.That would mean you are not deodexed. The .odex is the classes.dex. I hope this answered your question if not please re-word your post.
Sent from my EVO using Tapatalk 2
Dont think ive posted in this thread. but thank you one_love for this edit. has saved me many hours of my time trying to figure it out for this edit. Thank you!!
thx! worked on my device on jellybean 4.1.2, really helped me out. im making minor edits on settings.apk and signing the whole rom each time was extremly frustating.
also, this one
java -Xmx1024M -jar baksmali.jar -l -b -o smali/ classes.dex
Click to expand...
Click to collapse
is very helpfull, too
thx for great how to
one_love_420 said:
This is how to disable signature checks using seo's code that has been around forever, now for the EVO LTE on ICS.
Gonna loosely quote SteelH's [How To] post opener:
This reference guide is to tell you what to edit to disable Signature Checks for the EVO 4G LTE in Services.jar. It is not an all-inclusive how-to on adb, decompiling/recompiling apks, etc. There are already several very good sources right here on XDA for that information.
Decompile Services.jar and look for \com\android\server\pm\PackageManagerService.smali
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
.locals 7
if-nez p0, :cond_8
if-nez p1, :cond_6
const/4 v6, 0x1
:goto_5
return v6
:cond_6
const/4 v6, -0x1
goto :goto_5
:cond_8
if-nez p1, :cond_c
const/4 v6, -0x2
goto :goto_5
:cond_c
new-instance v3, Ljava/util/HashSet;
invoke-direct {v3}, Ljava/util/HashSet;-><init>()V
move-object v0, p0
array-length v2, v0
const/4 v1, 0x0
:goto_14
if-ge v1, v2, :cond_1e
aget-object v5, v0, v1
invoke-virtual {v3, v5}, Ljava/util/HashSet;->add(Ljava/lang/Object;)Z
add-int/lit8 v1, v1, 0x1
goto :goto_14
:cond_1e
new-instance v4, Ljava/util/HashSet;
invoke-direct {v4}, Ljava/util/HashSet;-><init>()V
move-object v0, p1
array-length v2, v0
const/4 v1, 0x0
:goto_26
if-ge v1, v2, :cond_30
aget-object v5, v0, v1
invoke-virtual {v4, v5}, Ljava/util/HashSet;->add(Ljava/lang/Object;)Z
add-int/lit8 v1, v1, 0x1
goto :goto_26
:cond_30
invoke-virtual {v3, v4}, Ljava/util/HashSet;->equals(Ljava/lang/Object;)Z
move-result v6
if-eqz v6, :cond_38
const/4 v6, 0x0
goto :goto_5
:cond_38
const/4 v6, -0x3
goto :goto_5
.end method
Do a whole-sale .method change and replace the entire .method with this one:
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
.locals 7
const/4 v0, 0x0
return v0
.end method
p.s. you will notice that there is no .line numbers and the .registers are now .locals, that is because I use a different baksmali cmd than what is the norm. I use:
Code:
java -Xmx1024M -jar baksmali.jar -l -b -o smali/ classes.dex
notice the extra -l -b
the -l(thats a lower case L not and upper case i) changes the .registers to .locals and the -b removes the smali debugging stuff that is not needed. Most custom rom builders know about this edits but this is for the average user that would like to make edits on their own and want to make edits to system/apps.
One_Love
Click to expand...
Click to collapse
Hi
I do this with my servicer.jar from CM9 .It s work good editet apk work , but i can t install app in data/app ant app ther don t work .
Thanks
Hey. Is it necessary to follow the last step to compile services.jar? I use Virtuous Ten Studio.
Dom3616 said:
Hey. Is it necessary to follow the last step to compile services.jar? I use Virtuous Ten Studio.
Click to expand...
Click to collapse
Nah, using vts to decompile change that one file and then build the project. Grab the new jar from binary. Push to your phone and enjoy.
Sent from my EVO using xda app-developers app
one_love_420 said:
This is how to disable signature checks using seo's code that has been around forever, now for the EVO LTE on ICS.
Gonna loosely quote SteelH's [How To] post opener:
This reference guide is to tell you what to edit to disable Signature Checks for the EVO 4G LTE in Services.jar. It is not an all-inclusive how-to on adb, decompiling/recompiling apks, etc. There are already several very good sources right here on XDA for that information.
Decompile Services.jar and look for \com\android\server\pm\PackageManagerService.smali
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
.locals 7
if-nez p0, :cond_8
if-nez p1, :cond_6
const/4 v6, 0x1
:goto_5
return v6
:cond_6
const/4 v6, -0x1
goto :goto_5
:cond_8
if-nez p1, :cond_c
const/4 v6, -0x2
goto :goto_5
:cond_c
new-instance v3, Ljava/util/HashSet;
invoke-direct {v3}, Ljava/util/HashSet;-><init>()V
move-object v0, p0
array-length v2, v0
const/4 v1, 0x0
:goto_14
if-ge v1, v2, :cond_1e
aget-object v5, v0, v1
invoke-virtual {v3, v5}, Ljava/util/HashSet;->add(Ljava/lang/Object;)Z
add-int/lit8 v1, v1, 0x1
goto :goto_14
:cond_1e
new-instance v4, Ljava/util/HashSet;
invoke-direct {v4}, Ljava/util/HashSet;-><init>()V
move-object v0, p1
array-length v2, v0
const/4 v1, 0x0
:goto_26
if-ge v1, v2, :cond_30
aget-object v5, v0, v1
invoke-virtual {v4, v5}, Ljava/util/HashSet;->add(Ljava/lang/Object;)Z
add-int/lit8 v1, v1, 0x1
goto :goto_26
:cond_30
invoke-virtual {v3, v4}, Ljava/util/HashSet;->equals(Ljava/lang/Object;)Z
move-result v6
if-eqz v6, :cond_38
const/4 v6, 0x0
goto :goto_5
:cond_38
const/4 v6, -0x3
goto :goto_5
.end method
Do a whole-sale .method change and replace the entire .method with this one:
Code:
.method static compareSignatures([Landroid/content/pm/Signature;[Landroid/content/pm/Signature;)I
.locals 7
const/4 v0, 0x0
return v0
.end method
p.s. you will notice that there is no .line numbers and the .registers are now .locals, that is because I use a different baksmali cmd than what is the norm. I use:
Code:
java -Xmx1024M -jar baksmali.jar -l -b -o smali/ classes.dex
notice the extra -l -b
the -l(thats a lower case L not and upper case i) changes the .registers to .locals and the -b removes the smali debugging stuff that is not needed. Most custom rom builders know about this edits but this is for the average user that would like to make edits on their own and want to make edits to system/apps.
One_Love
Click to expand...
Click to collapse
Done. But how to know it is working properly? I have copied to the phone and do not know, it works exactly as requested. Can not fault or whatever happened.
How to check it?
dedichthui said:
Done. But how to know it is working properly? I have copied to the phone and do not know, it works exactly as requested. Can not fault or whatever happened.
How to check it?
Click to expand...
Click to collapse
This mod work. I recompile and sign systemui.apk before but it blank when flash it. After made this disable signature check and flash again it work like a charmed.
Sent from my lolipop phone
hi
when i decompile Services.jar (g920p) 6.0.1 ican't find this path (\com\android\server\pm\PackageManagerService.smali)
how to disable signature verification on android marshmalow ?
I'm trying to get CRT-Off Animation working for my phone (Samsung Galaxy Young Duos: S6312; 4.1.2 JB), but it is not working.
I tried the following methods:
1. http://forum.xda-developers.com/showthread.php?t=2038675
2. http://forum.xda-developers.com/showthread.php?t=1725361 with following changes:
Black is the original code. Red is the code copied from the guide. Blue is the changes I made.
In com/android/server/PowerManagerService.smali:
Code:
[COLOR="Red"].method static synthetic access$[COLOR="Blue"]9999[/COLOR](Lcom/android/server/PowerManagerService;I)V
.registers 2
[COLOR="Blue"].param p0, "x0" # Lcom/android/server/PowerManagerService;
.param p1, "x1" # Z
[/COLOR]
.prologue
.line 110
invoke-direct {p0, p1}, Lcom/android/server/PowerManagerService;->nativeStartSurfaceFlingerAnimation(I)V
return-void
.end method[/COLOR]
Reason for changes(Correct me if I'm wrong):
access$9000 was already there.
.parameter is old code and won't compile.
In PowerManagerService$ScreenBrightnessAnimator.smali (There is no 'com/android/server/PowerManagerService$BrightnessState.smali' in my phone's service.jar):
Code:
.method private animateInternal(IZI)V
.registers 16
.param p1, "mask" # I
.param p2, "turningOff" # Z
.param p3, "delay" # I
.prologue
.line 3178
[COLOR="Red"]iget-object v4, p0, Lcom/android/server/[COLOR="Blue"]PowerManagerService$ScreenBrightnessAnimator[/COLOR];->this$0:Lcom/android/server/PowerManagerService;
const/16 v3, 0x11 # CRT-On and CRT-Off
#calls: Lcom/android/server/PowerManagerService;->nativeStartSurfaceFlingerAnimation(I)
invoke-static {v4, v3}, Lcom/android/server/PowerManagerService;->access$[COLOR="blue"]9999[/COLOR](Lcom/android/server/PowerManagerService;I)V
[/COLOR]
iget-object v7, p0, Lcom/android/server/PowerManagerService$ScreenBrightnessAnimator;->this$0:Lcom/android/server/PowerManagerService;
# getter for: Lcom/android/server/PowerManagerService;->mScreenBrightnessAnimator:Lcom/android/server/PowerManagerService$ScreenBrightnessAnimator;
invoke-static {v7}, Lcom/android/server/PowerManagerService;->access$7100(Lcom/android/server/PowerManagerService;)Lcom/android/server/PowerManagerService$ScreenBrightnessAnimator;
move-result-object v8
3. 'XBlast Tools' Module in XPOSED Framework. (Didn't work with this method also)
(For the first two mods,) After pushing services.jar (I push via CWM Recovery), on boot, phone optimises all apps. But after the phone starts, there is no CRT-Off animation.
Could anybody please help me?
I've attached the original services.jar file.
Howdy I have been compiling a list mods for the Verizon Note 4, but most should work across all variants!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is posted in the Samsung Galaxy Note 4 Unified Development Thread and can be viewed across all Note 4 Variants.
This is and will always be a work in progress, so feel free to contribute and please do!!!!
This thread assumes you know how to decompile and compile using APKTOOL.
Enjoy!!!
[Guide How-to] Verizon Note 4 Remove CD Installer & ASEC Note 4
This removes the annoying CD installer that pops up when you plug into your computer and your phone will go straight to MTP.
Enjoy!!
Remove CD Installer Download: http://d-h.st/Wm7
Just flash with TWRP
[Guide How-to] Verizon Note 4 Enable Native Call Recording Note 4
Smali edit for InCallUI.apk:
com/android/services/telephony/common/PhoneFeature.smali
Add the lines that are highlighted in RED
Code:
const-string v3, "CscFeature_VoiceCall_ConfigRecording"
invoke-virtual {v0, v3}, Lcom/sec/android/app/CscFeature;->getString(Ljava/lang/String;)Ljava/lang/String;
move-result-object v0
[COLOR="Red"]const-string v0, "RecordingAllowed"[/COLOR]
.line 1693
sget-object v3, Lcom/android/services/telephony/common/PhoneFeature;->mFeatureList:Ljava/util/HashMap;
const-string v6, "voice_call_recording"
const-string v7, "RecordingAllowed"
const-string v3, "CscFeature_VoiceCall_ConfigRecording"
invoke-virtual {v0, v3}, Lcom/sec/android/app/CscFeature;->getString(Ljava/lang/String;)Ljava/lang/String;
move-result-object v0
const-string v0, "RecordingAllowed"
.line 1693
sget-object v3, Lcom/android/services/telephony/common/PhoneFeature;->mFeatureList:Ljava/util/HashMap;
const-string v6, "voice_call_recording"
const-string v7, "RecordingAllowed"
For those not capable of doing smali edits just flash this via TWRP. Enable Call Recording
[Guide How-to] Remove Lockscreen Carrier Note 4
This removes the lockscreen carrier text.
Keyguard.apk smali edit:
smali/com/android/keyguard/CarrierText.smali:
Change if-nez to if-eqz in the indicated edit in BLUE:
Code:
.method private static concatenate(Ljava/lang/CharSequence;Ljava/lang/CharSequence;)Ljava/lang/CharSequence;
.locals 5
.param p0, "plmn" # Ljava/lang/CharSequence;
.param p1, "spn" # Ljava/lang/CharSequence;
.prologue
const/4 v2, 0x1
const/4 v3, 0x0
.line 310
invoke-static {p0}, Landroid/text/TextUtils;->isEmpty(Ljava/lang/CharSequence;)Z
move-result v4
[COLOR="Blue"]if-eqz[/COLOR] v4, :cond_1
move v0, v2
For those of you not capable of smali edit's, just flash this via TWRP Remove Lock Screen Carrier Text
[Guide How-to] Remove Safe Volume Warning Note 4
This removes the safe volume warning that pops up when you turn up the volume beyond a certain point
This mod requires modifying framework.jar
Edit smali/android/media/AudioService.smali:
Changes are in .method private checkSafeMediaVolume(III)Z
, new lines are in BLUE:
Code:
iget-object v6, p0, Landroid/media/AudioService;->mSafeMediaVolumeState:Ljava/lang/Integer;
invoke-virtual {v6}, Ljava/lang/Integer;->intValue()I
move-result v6
[COLOR="Blue"]goto :goto_td[/COLOR]
if-ne v6, v7, :cond_4
Code:
goto :goto_1
.line 6873
.end local v0 # "e":Ljava/lang/Exception;
.end local v1 # "pm":Landroid/os/PowerManager;
.end local v3 # "wl":Landroid/os/PowerManager$WakeLock;
[COLOR="Blue"]:goto_td[/COLOR]
:cond_4
monitor-exit v5
:try_end_3
.catchall {:try_start_3 .. :try_end_3} :catchall_0
goto :goto_0
.end method
For those not capable of smali edit's just flash this in TWRP Remove Safe Volume Warning
[Guide How-To] Enable Call & MSG Blocking Note 4
This enables call and msg blocking natively.
Simple CSC edit.
system/csc/feature.xml edit
Must be inserted BEFORE
</FeatureSet>
</SamsungMobileFeature>
(** please note that feature.xml can be overwritten so this may not stick if using a third party software like Xposed)
Code:
<CscFeature_Setting_EnableMenuBlockCallMsg>TRUE</CscFeature_Setting_EnableMenuBlockCallMsg>
For those of you not capable of this edit, just flash this with TWRP Native Call & Message Block
[Guide How-to] Replace Recents with Menu Note 4
Keylayout edits:
system/usr/keylayout/Generic.kl
Change key 254 from APP_SWITCH to MENU
key 254 MENU
Download: Generic.kl
Now Recent Apps capacitive key is Menu (single-press) and Search (long-press).
However, we have now lost access to recent apps via a hardware key.
[Guide How-to] VZW Note 4 4 Way Reboot Power Menu EPM Note 4
This will work with Odex or Deodexed Rom. To see the 4 way Menu you must hit restart on the Primary Menu!!!
First grab your Deodexed android.policy.jar from system/framework
Decompile it with APKTOOL. Look in smali\com\android\internal\policy\impl\
Find GlobalActions$SinglePressAction.smali and open with NotePad++
Look for this:
Code:
.class abstract Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.super Ljava/lang/Object;
.source "GlobalActions.java"
# interfaces
.implements Lcom/android/internal/policy/impl/GlobalActions$Action;
# annotations
.annotation system Ldalvik/annotation/EnclosingClass;
value = Lcom/android/internal/policy/impl/GlobalActions;
.end annotation
.annotation system Ldalvik/annotation/InnerClass;
accessFlags = 0x40a
name = "SinglePressAction"
.end annotation
# instance fields
.field public customAction:I
.field public isKnoxCustom:Z
.field private final mIcon:Landroid/graphics/drawable/Drawable;
.field private final mIconResId:I
.field mLayoutId:I
.field private final mMessage:Ljava/lang/CharSequence;
.field private final mMessageResId:I
# direct methods
.method protected constructor <init>(II)V
.locals 2
.param p1, "iconResId" # I
.param p2, "messageResId" # I
Add in the Red Text to look like this:
Code:
.class abstract Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.super Ljava/lang/Object;
.source "GlobalActions.java"
# interfaces
.implements Lcom/android/internal/policy/impl/GlobalActions$Action;
# annotations
.annotation system Ldalvik/annotation/EnclosingClass;
value = Lcom/android/internal/policy/impl/GlobalActions;
.end annotation
.annotation system Ldalvik/annotation/InnerClass;
accessFlags = 0x40a
name = "SinglePressAction"
.end annotation
[COLOR="Red"]# static fields
.field protected static rebootMode:I
.field protected static final rebootOptions:[Ljava/lang/String;[/COLOR]
# instance fields
.field public customAction:I
.field public isKnoxCustom:Z
.field private final mIcon:Landroid/graphics/drawable/Drawable;
.field private final mIconResId:I
.field mLayoutId:I
.field private final mMessage:Ljava/lang/CharSequence;
.field private final mMessageResId:I
# direct methods
[COLOR="Red"].method static constructor <clinit>()V
.locals 3
const/4 v0, 0x4
new-array v0, v0, [Ljava/lang/String;
const/4 v1, 0x0
const-string v2, "Reboot"
aput-object v2, v0, v1
const/4 v1, 0x1
const-string v2, "Hot Boot"
aput-object v2, v0, v1
const/4 v1, 0x2
const-string v2, "Download"
aput-object v2, v0, v1
const/4 v1, 0x3
const-string v2, "Recovery"
aput-object v2, v0, v1
sput-object v0, Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;->rebootOptions:[Ljava/lang/String;
return-void
.end method[/COLOR]
.method protected constructor <init>(II)V
.locals 2
.param p1, "iconResId" # I
.param p2, "messageResId" # I
Save file and look for GlobalActions.smali in the same folder.
Find this:
Code:
invoke-direct {v2, v0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$7;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
move-object/from16 v0, p0
iput-object v2, v0, Lcom/android/internal/policy/impl/GlobalActions;->mPowerOff:Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.line 1126
new-instance v3, Lcom/android/internal/policy/impl/GlobalActions$8;
const-string v2, "VZW"
sget-object v4, Lcom/android/internal/policy/impl/GlobalActions;->mSalesCode:Ljava/lang/String;
invoke-virtual {v2, v4}, Ljava/lang/String;->equals(Ljava/lang/Object;)Z
move-result v2
if-eqz v2, :cond_3
const v2, 0x1080b2d
:goto_2
const v4, 0x10401cf
move-object/from16 v0, p0
invoke-direct {v3, v0, v2, v4}, Lcom/android/internal/policy/impl/GlobalActions$8;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
move-object/from16 v0, p0
iput-object v3, v0, Lcom/android/internal/policy/impl/GlobalActions;->mRestart:Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.line 1164
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$9;
Change the red text to look like this:
Code:
invoke-direct {v2, v0, v3, v4}, Lcom/android/internal/policy/impl/GlobalActions$7;-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
move-object/from16 v0, p0
iput-object v2, v0, Lcom/android/internal/policy/impl/GlobalActions;->mPowerOff:Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.line 1126
new-instance v3, Lcom/android/internal/policy/impl/GlobalActions$[COLOR="Red"]99[/COLOR];
const-string v2, "VZW"
sget-object v4, Lcom/android/internal/policy/impl/GlobalActions;->mSalesCode:Ljava/lang/String;
invoke-virtual {v2, v4}, Ljava/lang/String;->equals(Ljava/lang/Object;)Z
move-result v2
if-eqz v2, :cond_3
const v2, 0x1080b2d
:goto_2
const v4, 0x10401cf
move-object/from16 v0, p0
invoke-direct {v3, v0, v2, v4}, Lcom/android/internal/policy/impl/GlobalActions$[COLOR="Red"]99[/COLOR];-><init>(Lcom/android/internal/policy/impl/GlobalActions;II)V
move-object/from16 v0, p0
iput-object v3, v0, Lcom/android/internal/policy/impl/GlobalActions;->mRestart:Lcom/android/internal/policy/impl/GlobalActions$SinglePressAction;
.line 1164
new-instance v2, Lcom/android/internal/policy/impl/GlobalActions$9;
Save file.
Add the 3 smali files in this zip to the same folder: Smali-Files-Zip
Now recompile. That's it.
For those of you not able to edit smali. Here is a zip flashable with TWRP. VZW Note 4 4 Way EPM Menu
To see the 4 way Menu you must hit restart on the Primary Menu!!!
Enjoy!!!
Framework Mods- Note 4 Native WiFi Tether, All Rotations, Safe Media Volume Disabled, Dreams enabled, Battery Critical Warnings lowered to 1%.
Here is the download: Framework Mods
Here is the download to return to stock: Stock Framework
Enjoy!!!
[Guide How-to] Remove NFC notification icon in status bar Note 4
First grab your Features.xml from /system/csc/
Open with Notepad++ and look for following text:
Code:
<!-- NFC -->
<CscFeature_NFC_SetSecureEventType>ISIS</CscFeature_NFC_SetSecureEventType>
<CscFeature_NFC_StatusBarIconType>Vzw</CscFeature_NFC_StatusBarIconType>
<CscFeature_SmartcardSvc_SetAccessControlType>GPAC, MODE1</CscFeature_SmartcardSvc_SetAccessControlType>
<CscFeature_SmartcardSvc_HideTerminalCapability>eSE</CscFeature_SmartcardSvc_HideTerminalCapability>
<CscFeature_NFC_CardModeRoutingTypeForUicc>ROUTE_ON_WHEN_SCREEN_UNLOCK</CscFeature_NFC_CardModeRoutingTypeForUicc>
<CscFeature_NFC_EnableSecurityPromptPopup>all</CscFeature_NFC_EnableSecurityPromptPopup>
<CscFeature_NFC_EnableInvalidTagPopup>true</CscFeature_NFC_EnableInvalidTagPopup>
<CscFeature_NFC_ConfigAdvancedSettings>Disable</CscFeature_NFC_ConfigAdvancedSettings>
<CscFeature_NFC_DefaultCardModeConfig>DH:UICC</CscFeature_NFC_DefaultCardModeConfig>
Change the red text to look like this:
Code:
<!-- NFC -->
<CscFeature_NFC_SetSecureEventType>ISIS</CscFeature_NFC_SetSecureEventType>
<CscFeature_NFC_StatusBarIconType>[COLOR="Red"]none[/COLOR]</CscFeature_NFC_StatusBarIconType>
<CscFeature_SmartcardSvc_SetAccessControlType>GPAC, MODE1</CscFeature_SmartcardSvc_SetAccessControlType>
<CscFeature_SmartcardSvc_HideTerminalCapability>eSE</CscFeature_SmartcardSvc_HideTerminalCapability>
<CscFeature_NFC_CardModeRoutingTypeForUicc>ROUTE_ON_WHEN_SCREEN_UNLOCK</CscFeature_NFC_CardModeRoutingTypeForUicc>
<CscFeature_NFC_EnableSecurityPromptPopup>all</CscFeature_NFC_EnableSecurityPromptPopup>
<CscFeature_NFC_EnableInvalidTagPopup>true</CscFeature_NFC_EnableInvalidTagPopup>
<CscFeature_NFC_ConfigAdvancedSettings>Disable</CscFeature_NFC_ConfigAdvancedSettings>
<CscFeature_NFC_DefaultCardModeConfig>DH:UICC</CscFeature_NFC_DefaultCardModeConfig>
Save file and copy back to /system/csc, reboot and boom its gone!!!
Enjoy!!
[Guide How-to] Enable Private Mode with a deodexed Rom and SecureStorage=false Note 4
First thing you need to do is grab PersonalPageService.apk from system/priv-app
Decompile with APKTOOL
Find PersonalPageService\smali\com\samsung\android\personalpage\service\util\SecureProperties.smali open with Notepad++
Find the follow code:
Code:
.method public constructor <init>(Landroid/content/Context;)V
.locals 2
.param p1, "context" # Landroid/content/Context;
.prologue
const/4 v1, 0x1
.line 61
invoke-direct {p0}, Ljava/lang/Object;-><init>()V
.line 54
const/4 v0, 0x0
iput-object v0, p0, Lcom/samsung/android/personalpage/service/util/SecureProperties;->mImpl:Lcom/samsung/android/personalpage/service/util/SecureProperties$PropertiesImpl;
.line 63
invoke-static {}, Landroid/os/Debug;->isProductShip()I
move-result v0
if-nez v0, :cond_3
.line 64
invoke-static {}, Lcom/sec/android/securestorage/SecureStorage;->isSupported()Z
move-result v0
if-nez v0, :cond_2
.line 65
const/4 v0, 0x0
sput-boolean v0, Lcom/samsung/android/personalpage/service/util/SecureProperties;->SUPPORT_SECURE_STORAGE_FEATURE:Z
.line 72
:goto_0
sget-boolean v0, Lcom/samsung/android/personalpage/service/util/SecureProperties;->SUPPORT_SECURE_STORAGE_FEATURE:Z
if-eqz v0, :cond_0
Replace the items in Red like this:
Code:
.method public constructor <init>(Landroid/content/Context;)V
.locals 2
.param p1, "context" # Landroid/content/Context;
.prologue
const/4 v1, 0x1
.line 61
invoke-direct {p0}, Ljava/lang/Object;-><init>()V
.line 54
const/4 v0, 0x0
iput-object v0, p0, Lcom/samsung/android/personalpage/service/util/SecureProperties;->mImpl:Lcom/samsung/android/personalpage/service/util/SecureProperties$PropertiesImpl;
.line 63
invoke-static {}, Landroid/os/Debug;->isProductShip()I
move-result v0
[COLOR="Red"]if-nez v0, :cond_0[/COLOR]
.line 64
invoke-static {}, Lcom/sec/android/securestorage/SecureStorage;->isSupported()Z
move-result v0
[COLOR="Red"]if-nez v0, :cond_0[/COLOR]
.line 65
const/4 v0, 0x0
sput-boolean v0, Lcom/samsung/android/personalpage/service/util/SecureProperties;->SUPPORT_SECURE_STORAGE_FEATURE:Z
.line 72
:goto_0
sget-boolean v0, Lcom/samsung/android/personalpage/service/util/SecureProperties;->SUPPORT_SECURE_STORAGE_FEATURE:Z
if-eqz v0, :cond_0
Save file and compile apk. Push to system/priv-app
For those not capable of changing smali files here is a flashable zip: PersonalPageService.apk
Enjoy!!!
[Guide How-To] Enable Lockscreen Rotation Note 4
First grab Keyguard.apk from system/priv-app
Decompile with APKTOOL.
Open smali file smali/com/android/keyguard/KeyguardViewManager.smali
Look for the following:
Code:
.method private shouldEnableScreenRotation()Z
.locals 3
.prologue
const/4 v1, 0x0
.line 249
iget-object v2, p0, Lcom/android/keyguard/KeyguardViewManager;->mContext:Landroid/content/Context;
invoke-virtual {v2}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v0
.line 250
.local v0, "res":Landroid/content/res/Resources;
const-string v2, "lockscreen.rot_override"
invoke-static {v2, v1}, Landroid/os/SystemProperties;->getBoolean(Ljava/lang/String;Z)Z
move-result v2
Replace the Red text to look like this:
Code:
Code:
.method private shouldEnableScreenRotation()Z
.locals 3
.prologue
[COLOR="Red"]const/4 v1, 0x1[/COLOR]
.line 249
iget-object v2, p0, Lcom/android/keyguard/KeyguardViewManager;->mContext:Landroid/content/Context;
invoke-virtual {v2}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v0
.line 250
.local v0, "res":Landroid/content/res/Resources;
const-string v2, "lockscreen.rot_override"
invoke-static {v2, v1}, Landroid/os/SystemProperties;->getBoolean(Ljava/lang/String;Z)Z
move-result v2
Compile and push to system/priv-app
For those that are unable to edit smali here is a flashable zip: LockSceen Rotation
Enjoy!!
[Guide How-to] Disable Screen Wake Plugged/Unplugged Note 4
First grab your services.jar from system/framework and decompile with APKTOOL
Find smali\com\android\server\power\PowerManagerService .smali and open PowerManagerService with Notepad++
Look for the following:
Code:
.method private shouldWakeUpWhenPluggedOrUnpluggedLocked(ZIZ)Z
.locals 4
.param p1, "wasPowered" # Z
.param p2, "oldPlugType" # I
.param p3, "dockedOnWirelessCharger" # Z
.prologue
const/4 v1, 0x1
const/4 v0, 0x0
.line 2216
iget-boolean v2, p0, Lcom/android/server/power/PowerManagerService;->mWakeUpWhenPluggedOrUnpluggedConfig:Z
if-nez v2, :cond_1
Change to Red text to look like this:
Code:
.method private shouldWakeUpWhenPluggedOrUnpluggedLocked(ZIZ)Z
.locals 4
.param p1, "wasPowered" # Z
.param p2, "oldPlugType" # I
.param p3, "dockedOnWirelessCharger" # Z
.prologue
[COLOR="Red"]const/4 v1, 0x0[/COLOR]
const/4 v0, 0x0
.line 2216
iget-boolean v2, p0, Lcom/android/server/power/PowerManagerService;->mWakeUpWhenPluggedOrUnpluggedConfig:Z
if-nez v2, :cond_1
That's it. Compile and push to system/framework
For those of you not capable of editing smali files here is a flashable zip: Disable Screen Wake Plug/unpluged
Enjoy!!!
[Guide How-to] Bluetooth Scan Dialog Removal
First grab your SecSettings.apk from system/priv-app and decompile with APKTOOL
Find smali/com/android/settings/Bluetooth/BluetoothScanDialog.smali
Look for the follow in .method private initialize()V method:
Code:
.line 79
new-instance v4, Lcom/android/settings/bluetooth/BluetoothScanDialog$3;
invoke-direct {v4, p0, v0}, Lcom/android/settings/bluetooth/BluetoothScanDialog$3;-><init>(Lcom/android/settings/bluetooth/BluetoothScanDialog;Landroid/app/AlertDialog;)V
invoke-virtual {v0, v4}, Landroid/app/Dialog;->setOnCancelListener(Landroid/content/DialogInterface$OnCancelListener;)V
.line 86
[COLOR="Red"]invoke-virtual {v0}, Landroid/app/Dialog;->show()V[/COLOR]
.line 87
return-void
.end method
Delete the text in Red, save file and compile. That's it. push to system/priv-app
Enjoy!!!
Flashlight Toggle & Battery Stats Toggle Mod Flashable-Settings-About Phone-Status-OFFICIAL Zip Updated 12-3-2014
Here is the flashable Flashlight Toggle Mod: VZW Flash Light Battery Stats Toggle Mod-Official Status
YOU MUST WAIT AT LEAST 5-10 MINS AFTER FLASHING FOR THE MOD TO WORK.
Some of you might also have to add "Flashlight" to your settings DB via SQLite. To see the toggle.
1) Download sqlite editor app. I got it from here.
2) Open the app and give it root permissions. It should populate a list.
3) Scroll and Tap the "Settings Storage"
4) Tap "Settings.db"
5) Tap "System"
6) Scroll down until you find "notification_panel_active_app_list", tap to highlight it. I noticed its a little hard to get it highlighted because it seems to want to highlight the one under it. So you might have to tap the one right above it to get it highlighted. Make sure its the notification_panel_active_app_list, and I also updated my notification_panel_active_app_list_reset NOT the notification_panel_default_active_app_list. I picked the wrong one the first time and it didnt work.
7) Once it is highlighted tap the phones menu button.
8) Tap "Edit Record"
9) You'll see a list of all the toggles that are currently enabled to show in notification area.
10) At the bottom of the list or anywhere else in the list add ; and the words Flashlight and Battery then another ;. So it will look like this at the end. ;TouchSensitivity;Flashlight;Battery; Then press Save.
11) Reboot and you should have a Flashlight and a Battery Stats toggle now. You can now use the edit feature and move it anywhere you want in the list of toggles.
This might also have a positive side effect of the following:
When you go to Settings-About Phone-Status it might say OFFICIAL!!!
Enjoy!!!
Enable Tab view in Settings
First grab your SecSettings.apk from system/priv-app
Decompile with APKTOOL and open res.values/bools with Notepad++
look for the following 2 lines:
Code:
<bool name="settings_list">false</bool>
<bool name="settings_grid">true</bool>
Change them to look like this:
Code:
<bool name="settings_list">[COLOR="Red"]true[/COLOR]</bool>
<bool name="settings_grid">[COLOR="Red"]false[/COLOR]</bool>
That's it. Compile and push to System/priv-app
Enjoy!!
How to enable Flashlight operation with Volume
First grab your SecSettings.apk from system/priv-app and decompile with APKTOOL.
Look in res/xml for display_settings_2014.xml and open with Notepad++
Add the following line in Red. When you are done look in settings-Display and you will see Torch Light options menu
Code:
<CheckBoxPreference android:title="@string/led_indicator_settings" android:key="key_simple_led_indicator_settings" android:summary="@string/led_indicator_settings_summary" android:widgetLayout="@touchwiz:layout/preference_widget_twcheckbox" />
[COLOR="Red"]<PreferenceScreen android:title="@string/torchlight_settings" android:key="torchlight" android:fragment="com.android.settings.torchlight.TorchlightSettings" />[/COLOR]
<ListPreference android:persistent="false" android:entries="@array/touch_key_light_entries" android:title="@string/touch_key_light" android:key="touch_key_light" android:summary="@string/touch_key_light_summary" android:widgetLayout="@layout/round_more_icon" android:entryValues="@array/touch_key_light_values" />
Compile and push to system/priv-app
That's it.
Enjoy!!!!
How to Enable add Apps Ops to Settings.
First grab SecSettings.apk from system/priv-app and decompile with APKTOOL
Get gridlist_settings_headers.xml from res/xml and edit with Notepad++
Look for:
Code:
<header android:icon="@drawable/ic_setting_grid_powersaving" android:id="@id/power_saving" android:title="@string/power_saving_mode_title_k" android:fragment="com.android.settings.powersavingmode.MenuPowerSavingModeSettings" />
and add right below it the following:
Code:
<header android:icon="@drawable/ic_settings_applicationpermissions" android:title="@string/app_ops_settings" android:fragment="com.android.settings.applications.AppOpsSummary" />
Save file and compile. That's it.
Push to system/priv-app
Enjoy!!!
Great post...
Will the Wi-Fi tether mod work with the ATT Variant?
thesilentnight said:
Great post...
Will the Wi-Fi tether mod work with the ATT Variant?
Click to expand...
Click to collapse
I have not seen the AT&T firmware. You must be rooted. If you are rooted and want to send me your framework-res.apk I can take a look for you.
Sadly as far as i know, root isnt yet available yet for the ATT variant....
thesilentnight said:
Sadly as far as i know, root isnt yet available yet for the ATT variant....
Click to expand...
Click to collapse
OMG, I'm sooo glad I could write what's written in my signature.
EMSpilot said:
...Here is the flashable Flashlight Toggle Mod...
Click to expand...
Click to collapse
You sir, ROCK!!! Very good work
the "Verizon Note 4 Enable Native Call Recording Note 4"
Will this work on N910G snapdragon variant ? also, does this enable automatic call recording ?
pratik_193 said:
the "Verizon Note 4 Enable Native Call Recording Note 4"
Will this work on N910G snapdragon variant ? also, does this enable automatic call recording ?
Click to expand...
Click to collapse
If you can send me your InCallUI.apk I can take a look. No automatic call recording. When you get a call or make a call you simply tap the call recording button once on the screen.
EMSpilot said:
If you can send me your InCallUI.apk I can take a look. No automatic call recording. When you get a call or make a call you simply tap the call recording button once on the screen.
Click to expand...
Click to collapse
Here it is..
Can you make a modded secphone something we had for note 3 ? link below
http://forum.xda-developers.com/showthread.php?t=2498449
CZ Eddie said:
OMG, I'm sooo glad I could write what's written in my signature.
Click to expand...
Click to collapse
Why is that?
thesilentnight said:
Sadly as far as i know, root isnt yet available yet for the ATT variant....
Click to expand...
Click to collapse
CZ Eddie said:
OMG, I'm sooo glad I could write what's written in my signature.
Click to expand...
Click to collapse
thesilentnight said:
Why is that?
Click to expand...
Click to collapse
My sig is pretty self explanatory in regards to your earlier statement.
I ditched my grandfathered unlimited data plan with AT&T in November 2014 because AT&T won't let anyone root their Galaxy phones.
Hello, T-Mobile!
Click to expand...
Click to collapse
pratik_193 said:
Here it is..
Can you make a modded secphone something we had for note 3 ? link below
http://forum.xda-developers.com/showthread.php?t=2498449
Click to expand...
Click to collapse
Hey @EMSpilot any luck ?
pratik_193 said:
Hey @EMSpilot any luck ?
Click to expand...
Click to collapse
Where did this InCallUI.apk come from? It won't build.
EMSpilot said:
Where did this InCallUI.apk come from? It won't build.
Click to expand...
Click to collapse
i got it from the current ROM i have a N910G snapdragon... you need anything else ?
Hmm, get a whole bunch of errors when trying to decompile SecSettings.apk. I can decompile other apks fine so don't think it's something with my setup.
Code:
W: Skipping "android" package group
W: Could not decode attr value, using undecoded value instead: ns=android, name=widgetLayout, value=0x02030015
Can't find framework resources for package of id: 2. You must install proper framework files, see project website for more info
Great post op!!
Did by any chance someone tried this in an international N4?
Awesome thread!
Subscribed!
Thanks contributors!
@EMSpilot
when i try to add the torchlight mod it makes all the checkboxes in the settings menu disappear.
any idea what the problem could be? the mod itself works perfect, but the checkboxes are pretty usefull as well.
thanks in advance :good:
Psycho_666 said:
@EMSpilot
when i try to add the torchlight mod it makes all the checkboxes in the settings menu disappear.
any idea what the problem could be? the mod itself works perfect, but the checkboxes are pretty usefull as well.
thanks in advance :good:
Click to expand...
Click to collapse
What Rom are you running? NJ5? or? The mods are based on NI2. If you are running NJ5 you have to decompile do the mod compile and push back to the phone.
I'm running an ANK5 rom.
but I don't understand how it has anything to do with the checkboxes.
it's pretty frustrating
Sent from my Note 4
Hello everyone, I have recently started doing modifications in the .smali world. I have already successfully modified my first application by converting the .apk to (almost) .java and then analyzing the method I needed to change. Then, going through the .smali code and modifying it there and compiling the .apk again.
This last one was a non-system apk, but I am currently working on a system apk, more explicitly OPSystemUI.apk.
Since it is odexed (.odex), I had to decompile this into a classes.dex and from there to (almost) .java to analyze the code.
Then, after decompiling the .dex to .smali, I found the function from the .java that I wanted to change.
Here is where the problem starts:
The function in .java I am modifying is (com\android\systemui\statusbar\policy\SignalController.class):
Code:
public int getCurrentIconId()
{
if (this.mCurrentState.connected) {
return getIcons().mSbIcons[this.mCurrentState.inetCondition][this.mCurrentState.level];
}
if (this.mCurrentState.enabled) {
return getIcons().mSbDiscState;
}
return getIcons().mSbNullState;
}
This same function in .smali is (SignalController.smali):
Code:
.method public getCurrentIconId()I
.registers 3
.prologue
.line 137
.local p0, "this":Lcom/android/systemui/statusbar/policy/SignalController;, "Lcom/android/systemui/statusbar/policy/SignalController<TT;TI;>;"
iget-object v0, p0, Lcom/android/systemui/statusbar/policy/SignalController;->mCurrentState:Lcom/android/systemui/statusbar/policy/SignalController$State;
iget-boolean v0, v0, Lcom/android/systemui/statusbar/policy/SignalController$State;->connected:Z
if-eqz v0, :cond_19
.line 138
invoke-virtual {p0}, Lcom/android/systemui/statusbar/policy/SignalController;->getIcons()Lcom/android/systemui/statusbar/policy/SignalController$IconGroup;
move-result-object v0
iget-object v0, v0, Lcom/android/systemui/statusbar/policy/SignalController$IconGroup;->mSbIcons:[[I
iget-object v1, p0, Lcom/android/systemui/statusbar/policy/SignalController;->mCurrentState:Lcom/android/systemui/statusbar/policy/SignalController$State;
iget v1, v1, Lcom/android/systemui/statusbar/policy/SignalController$State;->inetCondition:I
aget-object v0, v0, v1
iget-object v1, p0, Lcom/android/systemui/statusbar/policy/SignalController;->mCurrentState:Lcom/android/systemui/statusbar/policy/SignalController$State;
iget v1, v1, Lcom/android/systemui/statusbar/policy/SignalController$State;->level:I
aget v0, v0, v1
.line 142
:goto_18
return v0
.line 139
:cond_19
iget-object v0, p0, Lcom/android/systemui/statusbar/policy/SignalController;->mCurrentState:Lcom/android/systemui/statusbar/policy/SignalController$State;
iget-boolean v0, v0, Lcom/android/systemui/statusbar/policy/SignalController$State;->enabled:Z
if-eqz v0, :cond_26
.line 140
invoke-virtual {p0}, Lcom/android/systemui/statusbar/policy/SignalController;->getIcons()Lcom/android/systemui/statusbar/policy/SignalController$IconGroup;
move-result-object v0
iget v0, v0, Lcom/android/systemui/statusbar/policy/SignalController$IconGroup;->mSbDiscState:I
goto :goto_18
.line 142
:cond_26
invoke-virtual {p0}, Lcom/android/systemui/statusbar/policy/SignalController;->getIcons()Lcom/android/systemui/statusbar/policy/SignalController$IconGroup;
move-result-object v0
iget v0, v0, Lcom/android/systemui/statusbar/policy/SignalController$IconGroup;->mSbNullState:I
goto :goto_18
.end method
and I modify it by adding a logcat command in the beginning to see when this is executed, so it looks like so:
Code:
.method public getCurrentIconId()I
.registers 3
.prologue
.line 137
.local p0, "this":Lcom/android/systemui/statusbar/policy/SignalController;, "Lcom/android/systemui/statusbar/policy/SignalController<TT;TI;>;"
iget-object v0, p0, Lcom/android/systemui/statusbar/policy/SignalController;->mCurrentState:Lcom/android/systemui/statusbar/policy/SignalController$State;
iget-boolean v0, v0, Lcom/android/systemui/statusbar/policy/SignalController$State;->connected:Z
[COLOR="Red"] const-string v3, "getCurrentIconId SIM"
const-string v4, "Beginning of function SIM"
invoke-static {v3, v4}, Landroid/util/Log;->d(Ljava/lang/String;Ljava/lang/String;)I[/COLOR]
if-eqz v0, :cond_19
. . .
- If I try to recompile the .apk from this .smali code, without the .odex, it works perfect (so recompiling should not be the problem)
-However, if I add the logcat command, my phone does not execute OPSystemUI properly (the logcat command is just to modify in some way the code and see its result, it shouldn't change the apk behavior, right?)
Is my added code for logcat wrong? Else, what could it be? I am out of ideas
Overall, the final goal is to remove an icon from the statusbar (the NoSIM icon), and this was a start.
Try changing the .registers 3 to .registers 5
ANIKETultimate said:
Try changing the .registers 3 to .registers 5
Click to expand...
Click to collapse
Thanks for the suggestion!
I tried changing it to 5 and it still failed by looping in the keyguard (first encryption after starting the phone)
rauleeros said:
Thanks for the suggestion!
I tried changing it to 5 and it still failed by looping in the keyguard (first encryption after starting the phone)
Click to expand...
Click to collapse
Hmm. Try moving the lines just before the .local p0 line