Update is being pushed out slowly, but I figured out a way to forcibly do it in kies.
It simple. Do not plug in your phone while you are doing this.
First, make sure you update to the new version of kies. Then go to the menu bar> tools, then firmware upgrade and initialization.
Click until you get to the screen that asks you to input your S/N and Model name of your phone. Enter in these details. It's behind the battery.
Once you do this, a screen will pop up asking if you are sure you want to upgrade to CSC:LE5. AKA ice cream sandwich.
At this point, plug in your phone and it'll go through.
Your welcome.
EDIT: as of today, Monday June 25th 2012, at 11:00 AM, the update is officially available through KIES. If you don't see it now, a popup telling you to upgrade will appear by tomorrow.
EDIT 2: DO NOT UPDATE TO ICS. IT SUCKS. AND IT IS NOT NEARLY AS SMOOTH AS GINGERBREAD. If you hate android lag, the update will almost certianly piss you off. If you have questions about how its different, just ask. I already downgraded to gingerbread again. ICS = Not missed.
EDIT 3: (copy pasta from a post I made)
amaddux29 said:
Can you "downgrade" unrooted from Kies as easily as upgrading?
Click to expand...
Click to collapse
No. I assumed that the update through kies updated the bootloaders, so I found a stock 2.3.4 one click odin executable W/ Bootloaders in the development section and flashed that. Make sure you factory reset and clear cache in 3e recovery before you do so. New bootloaders can't take advantage of the Jig. I also didn't want to find out what flashing gingerbread on ICS bootloaders would do my phone.
I find 2.3.6 has battery issues, and I find 2.3.4 to be THE most stable release.
http://forum.xda-developers.com/showpost.php?p=20229527&postcount=46
The file you want from this page is the I777UCKH7-CL503881 Stock Binaries, and you want the odin3 one click download. It's one of the ones with the warning text in red.
To restore your phone to stock 2.3.4 once on ICS do the following:
1) Boot into 3e recovery (power + volume down + volume up)
-Wipe Cache
-Factory Restore
2) Pull battery
-boot into download mode (volume down + volume up, then connect phone to computer while buttons are simultaneously pressed)
3) Open the one click executable. Make sure it recognizes the phone
-It will say [COM8] or something. Just make sure its green.
4) Flash it. It will work. after you boot up into gingerbread, If the system freezes after the At&t logo just go back into 3e recovery and wipe cache + factory reset again. It will work. Trust me.
Note: ODIN is a very tricky piece of software. When you click flash, it will probably not work and say "failed" or something along those lines. Try it again. It will work. It took me almost 20 tries to get the flash to go through. Also try flashing it as soon as you plug in your phone (not even 2 seconds after it is recognized). That seems to work. Don't be worried if it never seems to go through.
Note: YOU ARE FLASHING BOOTLOADERS. PLEASE PLEASE PLEASE BE CAREFUL. If ODIN DOES NOT WORK OR YOUR COMPUTER SHUTS OFF HALFWAY THOUGH, OR ODIN QUITS, NEVER PULL THE BATTERY FROM YOUR PHONE. As long as you see a downloading sign on your phone, your phone is ALWAYS recoverable. Just open up the odin executable again, make sure your phone is recognized, and restart the process. If odin freezes halfway through the process, always restart odin, NEVER touch your phone. Your phone can always be written to while in the download state. This is how 99% of all bricking happens, because people always feel the need to turn off their phone in the middle of the process.
Cookies for the effort.
Already common knowledge for forcing OTA updates, at least to anyone that actually takes the time to read/search the forums.
BROKKANIC said:
Cookies for the effort.
Already common knowledge for forcing OTA updates, at least to anyone that actually takes the time to read/search the forums.
Click to expand...
Click to collapse
Except its not ota......
Nice trick by the way op
Thanks for the trick. One question - how long did it take for you (or for anyone else who decided to use this method)? It's been stuck at the 90% value for about 2 hours for me, and I'm beginning to get a little worried, since these things don't normally take so long (according to friends I've asked, anyhoo). Any help would be greatly appreciated.
Nawhdee said:
Thanks for the trick. One question - how long did it take for you (or for anyone else who decided to use this method)? It's been stuck at the 90% value for about 2 hours for me, and I'm beginning to get a little worried, since these things don't normally take so long (according to friends I've asked, anyhoo). Any help would be greatly appreciated.
Click to expand...
Click to collapse
Are you talking about 90% fnished downloading/extracting? or 90% putting it on the phone (with the green bar going across the phone)?
If it hasn't started putting it on the phone yet you should be fine to unplug it and start over. If you remove cable while it's actually putting in on the phone, you will have problems. not sure which kind though. maybe just a soft brick. you should be able to get back to download mode though.
jack man said:
Are you talking about 90% fnished downloading/extracting? or 90% putting it on the phone (with the green bar going across the phone)?
If it hasn't started putting it on the phone yet you should be fine to unplug it and start over. If you remove cable while it's actually putting in on the phone, you will have problems. not sure which kind though. maybe just a soft brick. you should be able to get back to download mode though.
Click to expand...
Click to collapse
I apologize for not being specific - 90% putting it on the phone, I presume, since that green bar you mentioned is there (with the "Downloading..." underscored with a "Do not turn off target !!").
Assuming this is beyond the norm, do you think I have no choice but to risk the soft brick?
EDIT: Oops, it's actually a blue bar. My bad. So it's safe to disengage then?
Nawhdee said:
I apologize for not being specific - 90% putting it on the phone, I presume, since that green bar you mentioned is there (with the "Downloading..." underscored with a "Do not turn off target !!").
Assuming this is beyond the norm, do you think I have no choice but to risk the soft brick?
Click to expand...
Click to collapse
Yeah, if it's been at that point for that long, you will have to risk it. do you have a jig? if you don't, invest in one. they are worth having around.
Let us know if it works out. I'm crossing my fingers for you.
BobbyBlue said:
Update is being pushed out slowly, but I figured out a way to forcibly do it in kies.
It simple. Do not plug in your phone while you are doing this.
First, make sure you update to the new version of kies. Then go to the menu bar> tools, then firmware upgrade and initialization.
Click until you get to the screen that asks you to input your S/N and Model name of your phone. Enter in these details. It's behind the battery.
Once you do this, a screen will pop up asking if you are sure you want to upgrade to CSC:LE5. AKA ice cream sandwich.
At this point, plug in your phone and it'll go through.
Your welcome.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA
jack man said:
Yeah, if it's been at that point for that long, you will have to risk it. do you have a jig? if you don't, invest in one. they are worth having around.
Let us know if it works out. I'm crossing my fingers for you.
Click to expand...
Click to collapse
No, I don't...I'll be sure to purchase one as soon as possible.
As for the phone, I shut down my computer and unplugged it - received a "Firmware upgrade encountered an issue" screen. At the moment, I'm looking around for a fix. This seems to be a soft brick, though, so I'm optimistic. If there is anything you could suggest for me, it'd be greatly appreciated.
jack man has posted those instructions two days ago
Look Here
Nawhdee said:
No, I don't...I'll be sure to purchase one as soon as possible.
As for the phone, I shut down my computer and unplugged it - received a "Firmware upgrade encountered an issue" screen. At the moment, I'm looking around for a fix. This seems to be a soft brick, though, so I'm optimistic. If there is anything you could suggest for me, it'd be greatly appreciated.
Click to expand...
Click to collapse
see if this works: hold down both volume keys at the same time. then, while holding them, plug in your usb cable. hold the keys until you see a screen with green text. you will then hit the vol up key o get to download mode. then you could start the whole process over again through KIES.
I'm not sure what I'm doing wrong but when I enter the imei into the s/n blank it tells me it's not a valid serial number. I've tried entering the actual s/n and I get a weird message in what looks like Chinese. Any other suggestions?
Sent from my SAMSUNG-SGH-I777 using XDA
dnf007 said:
I'm not sure what I'm doing wrong but when I enter the imei into the s/n blank it tells me it's not a valid serial number. I've tried entering the actual s/n and I get a weird message in what looks like Chinese. Any other suggestions?
Sent from my SAMSUNG-SGH-I777 using XDA
Click to expand...
Click to collapse
Yeah, the IMEI won't work anyway.
That weird message was coming up the day that Samsung said their servers would be down (yesterday). They may have figured out that people were getting the "recovery" firmware that way and disabled it. Who knows.
So any word if that method will work now?
Sent from my SAMSUNG-SGH-I777 using XDA
I tried this method but now my phone only shows the "firmware upgrade encountered an issue error." I tried doing the recovery process on kies and tried to install the firmware again but to no avail. Does anyone have an idea how to work around this?
adypac said:
I tried this method but now my phone only shows the "firmware upgrade encountered an issue error." I tried doing the recovery process on kies and tried to install the firmware again but to no avail. Does anyone have an idea how to work around this?
Click to expand...
Click to collapse
You could try the one-click downloader in the Download Repository. The link is there, but the file is still uploading to dropbox. You'll get a 404 error until the upload is complete. Dropbox is really slow uploading things. Link to the Download Repository is in my signature.
Kies is crap
I've been trying and trying to download from Kies but when I plug in my phone it says I'm up to date and when I try to do the manual update it tells me my serial number is wrong and to try again...any suggestions?
dnf007 said:
...any suggestions?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1650948
go back to GB
Hi,
I followed the process and successfully updated to ics, but the phone is hanging frequently. Can I go back to GB? If so how. Please help. I did this on officially unlocked att galaxy s2. Also the tethering also not working properly. I am using this phone in India.
Thanks
urgent pls help
I am loosing the network on and off pls help what is the process to go back to GB
Related
I have never bricked it before, and I cannot go into download mode... I tried the the Vol up and vol down, didn't work, so I have been using ADB and just ****ed something up....
Now I need to know a way how I can revert back to stock, please and thank you, I will forever owe you one.
EDIT: Okay there is some confusion, to simplify it I will take it step by step:
I replaced an APK file from my system/apps and ever since it has been force closing process.android.acore, so I tried reflashing to stock, it froze while doing so now I have a picture of a caution sign, a phone and a computer coming up on my Vibrant, it will not start up.
It is hardware locked because I have never been able to access download mode via hardware keys(I have always been using ADB).
Is there any way I can reinstall stock? Or is my vibrant now destroyed?
what exactly were you doing when your phone stopped working? "just ****ed something up" makes it hard to pinpoint problems...
I don't know I replaced my phone.apk with another one then ever since then it keeps saying process.android.acore has stopped working. It wouldn't stop showing up so I tried to reflash with Odin to stock but it froze and now it is bricked.
bumping a little bit, I have never bricked it before so I have 0 experience.
What do you mean by froze? On what screen? How far can you get into booting?
bigragu said:
What do you mean by froze? On what screen? How far can you get into booting?
Click to expand...
Click to collapse
Alright let me start over with more detail:
I tried to replace the dialer so I replaced the phone.apk and then process.android.acore kept force closing so then I tried reflashing with stock, during that I don't know what happened but I think my phone froze, so then it shut off and turned back on, I only found a screen with a computer on it... I am assuming it is bricked.... I also know it is hardware locked because I tried going into debug mode with vol up and vol down, how can I unbrick it?
Try moving the stock rom into the phones internal memory via adb. And flash it after a wipe.
I am Also having this same problem
I Flashed my Vibrant through Rom Manager to Froyo 2.2 from eugene373 and sombionix.
After flashing to both ROMS for Froyo I wanted to revert back to 2.1.
I tried to put sombionix 1.3 eclair ROM back on to my phone using clockwork mod.
The flash was not successful it stopped in the middle but the phone came on with a Force close error of an android process.
I tried to reboot through adb reboot recovery with usb debugging enabled.
The phone shut down like it would reboot into recovery mode and now it gets stuck on boot at the samsung vibrant screen.
I tried to use ODIN to flash back to the stock Rom but the phone is recognized in ODIN but will not flash.
ODIN sees the phone but will not get past flash analysis. (Sat for 8 Hours)
I believe this is the definition of bricked. Please Help!!!!!
sheek360 said:
Try moving the stock rom into the phones internal memory via adb. And flash it after a wipe.
Click to expand...
Click to collapse
It isn't even being read by my computer... nothing...
sympala said:
I Flashed my Vibrant through Rom Manager to Froyo 2.2 from eugene373 and sombionix.
After flashing to both ROMS for Froyo I wanted to revert back to 2.1.
I tried to put sombionix 1.3 eclair ROM back on to my phone using clockwork mod.
The flash was not successful it stopped in the middle but the phone came on with a Force close error of an android process.
I tried to reboot through adb reboot recovery with usb debugging enabled.
The phone shut down like it would reboot into recovery mode and now it gets stuck on boot at the samsung vibrant screen.
I tried to use ODIN to flash back to the stock Rom but the phone is recognized in ODIN but will not flash.
ODIN sees the phone but will not get past flash analysis. (Sat for 8 Hours)
I believe this is the definition of bricked. Please Help!!!!!
Click to expand...
Click to collapse
Excuse me sir, make your own thread, don't jack mine...
Smokexz said:
It isn't even being read by my computer... nothing...
Excuse me sir, make your own thread, don't jack mine...
Click to expand...
Click to collapse
lol Sorry Smokexz didn't mean to jack your thread just trying to consolidate phone bricked threads. I will create my own NO PROBLEM.
sympala said:
lol Sorry Smokexz didn't mean to jack your thread just trying to consolidate phone bricked threads. I will create my own NO PROBLEM.
Click to expand...
Click to collapse
Thanks, regardless both our situations are bad .
Please? I really need help with this.
Smokexz said:
Please? I really need help with this.
Click to expand...
Click to collapse
If there is an answer, which I am not sure that there is, it would be here: http://forum.xda-developers.com/showthread.php?t=782739. You may have already seen it, but if not it gives many different processes to try. Good luck!
hourst2 said:
If there is an answer, which I am not sure that there is, it would be here: http://forum.xda-developers.com/showthread.php?t=782739. You may have already seen it, but if not it gives many different processes to try. Good luck!
Click to expand...
Click to collapse
Yep, I'm screwed thanks for the help though.
Can you get the phone in download mode?
Did you try this:
Pull battery
hold the volume up and down
reinsert the battery whiles still holding down the volume up n down
plug in usb cord
it should put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
I am not sure if you can get in DL mode and it just wont let you do anything, but if you have already tried this my apologies.
gthmcty1 said:
Can you get the phone in download mode?
Did you try this:
Pull battery
hold the volume up and down
...
Click to expand...
Click to collapse
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Alright thanks
Sent from my Motorola_i1 using Tapatalk
gravis86 said:
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Click to expand...
Click to collapse
Your a dumb ass, His thing actually does work.. I was "hardware locked" like 5 times That DOES work, you sir are a DUMB ASS < Had to say it again
(Make sure that your USB is plugged into your computer & not your phone)
Remove the back cover & remove the battery along with your sim & micro SD
Hold the VOL Up & VOL Down
(Keep holding those buttons) Now insert the battery
Plug the usb into your phone.
It will put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
^^Do that
gravis86 said:
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Click to expand...
Click to collapse
Wow you come in and try to offer up help and you get some one that feels the need to police the "suggestions"........ Have a coke and a smile my friend...and relax!
gthmcty1 said:
Wow you come in and try to offer up help and you get some one that feels the need to police the "suggestions"........ Have a coke and a smile my friend...and relax!
Click to expand...
Click to collapse
Not to mention that what that guy said actually works...
Some people just make me laugh
(Make sure that your USB is plugged into your computer & not your phone)
Remove the back cover & remove the battery along with your sim & micro SD
Hold the VOL Up & VOL Down
(Keep holding those buttons) Now insert the battery
Plug the usb into your phone.
It will put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
^^Do that
so she bought a new phone without even powering it on.. she came to my house and later said it was stuck on a boot up image that read team whiskey, im no phone buff so i have no idea what going on. i put out a help post on craigslist and i was referred here for help..
so please let me know whats going on with this
BTW its a samsung vibrant
Awesome. At least she made the right choice in purchasing the phone from someone who used the right ROM.
What you're going to need to do is either get the phone into Recovery Mode or ODIN back to stock.
I'm guessing you will need to ODIN back to stock as it's stuck on the boot screen. Do a search in the Development forum and look for the latest ODIN package where it includes the ODIN program and the necessary files to bring the phone back to stock (.tar, .pit, etc.)
There are walkthroughs on how to run the program as well.
If it says Team Whiskey then it probably has the newest Bionix ROM. One of the best to have on it. If it is the first boot after the cache is cleared it can take 10 minutes for it's first boot to rebuild the cache. If it is the first boot after the ROM was flashed you should wait a full ten minutes for the ROM to complete its initial setup and then reboot it. Since you don't know I would wait anyhow, it can not hurt. DON'T TOUCH THE PHONE DURING THESE INITIAL TEN MINUTES OR IT WILL BE BUGGY.
Get more info from the source here --> http://teamwhiskey.com/
What is likely that specific ROM here --> http://board.teamwhiskey.com/viewtopic.php?f=3&t=1126
The Vibrant Guide: Must read for any new owner --> http://forum.xda-developers.com/showthread.php?t=771111
How to get back to stock if you so choose (So not worth it) can be found in the guide above.
T313C0mun1s7 said:
If it says Team Whiskey then it probably has the newest Bionix ROM. One of the best to have on it. If it is the first boot after the cache is cleared it can take 10 minutes for it's first boot to rebuild the cache. If it is the first boot after the ROM was flashed you should wait a full ten minutes for the ROM to complete its initial setup and then reboot it. Since you don't know I would wait anyhow, it can not hurt. DON'T TOUCH THE PHONE DURING THESE INITIAL TEN MINUTES OR IT WILL BE BUGGY.
Get more info from the source here --> http://teamwhiskey.com/
What is likely that specific ROM here --> http://board.teamwhiskey.com/viewtopic.php?f=3&t=1126
The Vibrant Guide: Must read for any new owner --> http://forum.xda-developers.com/showthread.php?t=771111
How to get back to stock if you so choose (So not worth it) can be found in the guide above.
Click to expand...
Click to collapse
However, if its stuck at boot as the OP stated, then Odin to stock is probably going to be his best bet. The third link that was posted by T313C0mun1s7 is the place to start.
You have some work to do OP, you're best bet is to Odin back to stock, and you will find the resources needed in the Vibrant Bible linked above. Good luck.
Bottom line Franky is this:
It's not un-fixable. The posters here are correct in that if you can see the logo you're seeing, then it's more than likely fully recoverable and can be a great phone. The post here that has provided you links is a very good one. Best thing you can do is read all the "noob" guides/FAQ/bible threads that are stickied to the top of most of the categories in the Vibrant section. They contain a TON of useful info. If you can use a PC and have the correct USB cable, you can get it done.
And if you do get it back up and running, and she got a deal on it, she might not be so stupid after all!
A quick background for you on terms and what's what since you are not familar with the phone
The Vibrant was originally sold with a software operating system Android 2.1 The version of that system was JFD which, the letters are code for version and release date. So, when you read all the numbers/letters they are talking about newer versions... the latest and greatest.
I would 1st try turning on the phone and let it sit for 10-15 min and see if the previous person did not complete the installation process. If it goes to the home screen, then you are good to go. If not, then you will need to Odin back to stock.
If you can see a logo, the the phone will respond to software via Odin. Odin is a software you load on your desktop computer , it opens a menu that kinda looks like an custom excel sheet. In the upper left corner when you plug in the phone to connect to the desktop with Odin already open,it will say com 0 , com8 or something what it reads out is less important what is important is it recognizes the phone. From there the noob guide will explain everything else.
This is a super phone, especially because you can modify it so easily and it is REAL hard to permanently brick (permanently break). Read the bible and members S15274N noob guide......... his sticky in general is pretty complete and very easy to understand. If you get stuck come back to the forum and we will help you solve. Good luck
In the Noob guide it will have the drivers Odin and the other utilities you will need.
odin back to stock
http://forum.xda-developers.com/showthread.php?t=803492
How much did she pay for it? If it was like $500 +, then yea, that was really stupid but if she got it for under $150 because it was supposedly "broken", then she had unintentionally made a smart buy. The seller would've been the stupid one for not researching on how to revive their Vibrant.
Send me a PM and I'll be glad to help!!
Sent from my SGH-T959 using XDA App
Awesome Title . LMAO XD
AgentFour20 said:
Awesome Title . LMAO XD
Click to expand...
Click to collapse
Ya, I was going to offer a solution to the problem posted in the title, but I guess I'll be nice today
dude last time my gf fup she became my ex . . .
MWBehr said:
Ya, I was going to offer a solution to the problem posted in the title, but I guess I'll be nice today
Click to expand...
Click to collapse
lol
10 char
AgentFour20 said:
Awesome Title . LMAO XD
Click to expand...
Click to collapse
I thought this was a want ad....
-bZj
thanks to all you guys
but i think this phone has taken a turn for the worse,
i was away for the day visiting my son, so i was not able to try and repair the phone..
well i came home to see this dumb bi**ch standing with the phone..
apparently she had her brother try and repair it and now it wont even show the team whiskey logo. all it does is show the vibrant/samsung image then it shuts off and repeat over and over
if anyone here is near anaheim california i'd gladly appreciate any help from you
This phone is really resilient, and if you're still getting images on the screen, you can still fix it. The trick is to get it into download mode, which can be hit or miss, and may take several tries. There are different methods posted around the internet, but for mine, I hold the vol+ and vol- and then plug in the usb cable connected to the computer. If it goes into download mode, then you're home free. Once you Odin it back to stock, you can go anywhere from there.
vnamee said:
This phone is really resilient, and if you're still getting images on the screen, you can still fix it. The trick is to get it into download mode, which can be hit or miss, and may take several tries. There are different methods posted around the internet, but for mine, I hold the vol+ and vol- and then plug in the usb cable connected to the computer. If it goes into download mode, then you're home free. Once you Odin it back to stock, you can go anywhere from there.
Click to expand...
Click to collapse
i followed those steps and as soon as i plugged the USB an image like this one popped up
i tried to attach a link but couldn't due to spam
but i was a triangle reading download.... do not turn off target
I
franky414 said:
i followed those steps and as soon as i plugged the USB an image like this one popped up
i tried to attach a link but couldn't due to spam
but i was a triangle reading download.... do not turn off target
Click to expand...
Click to collapse
You're good to go. Use odin and install the rom.
Sent from my SGH-T959 using XDA App
franky414 said:
i followed those steps and as soon as i plugged the USB an image like this one popped up
i tried to attach a link but couldn't due to spam
but i was a triangle reading download.... do not turn off target
Click to expand...
Click to collapse
That's good! The phone is fixable. (However i don't believe your story even a little). But if I'm wrong. Follow the advice given and you will be OK.
Sent from my SGH-T959 using XDA App
thaks guys, i'm downloading odin from a a link provided above
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
What file did you flash?
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
crazy25000 said:
What file did you flash?
Click to expand...
Click to collapse
Stupidly, I believed I Odin-ed a file named "T959UVJI6.rar". Which if I remember right, is a custom kernel. I never really understood the whole kernel ordeal. I used to have a motorola milestone, which, I would do all all sorts of things to with no problem. But, that never included kernels. And for the most part, it didn't have any hardware key lock.
I, think, I need to do the jig mod-y thingy.
mdi2001 said:
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I'm not sure how, because, apparently, my samsung's 3 keys are locked. I have tried so many times, but, it never works. Sadly.
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
s15274n said:
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
Click to expand...
Click to collapse
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
^ ironically it was the JI6 update that alleviated a lot of the "hardware locked" Vibrants.
Have you tryed making a JIG? It helps if you can't get into download mode
supaduparimy said:
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Click to expand...
Click to collapse
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
brisseau said:
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
Click to expand...
Click to collapse
Sadly, my samsung, was one of the newer models, that released with the combination lock. And so, no matter how much i have tried, it never worked.
I tried every technique I have seen. Nothing.
xXcybersniperXx said:
Have you tryed making a JIG? It helps if you can't get into download mode
Click to expand...
Click to collapse
Yes, I have, actually. I found it really hard though. Mainly because the wires were way too small. But, the reason I gave up, is because the resistor is larger then the wire, and so, needed very precise soldering. I could've used the back, but, all usbs are different; and the ones i had, were very much different then all the demonstrations videos i watched.
PS I am actually buying a stick online.
(I can't post link)
As my last resource, to something I must get done, I will pay whatever...
younix258 said:
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
Click to expand...
Click to collapse
Yes... yes...
Yeah, but from what I remember, that software, just forced the samsung into download or recovery mode. From there, then the person would just mod a file to change that. But, my phone wont even do as the force says.... in the first place... It has always, just stayed in the continuous boot phase...
If you have skype or any chat program, I can help you easily.
crazy25000 said:
If you have skype or any chat program, I can help you easily.
Click to expand...
Click to collapse
The reason I am in dire need for this android to work, is because, I have no other way of flourishing in life. It was the one thing that kept everything in balance. Stupid moto, now it physically dies
On another hand, I have a iPod Touch 1G, lol.
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Oxirane said:
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Click to expand...
Click to collapse
I wish there was a physical jig seller in Vancouver (where I live).
The button combos don't work on my phone. Sadly. It was the newly made models with the button combo block.
If it helps, before, when I could go into that option, I did it by using a toolkit and making it put me to recovery/download mode.
UPDATE! I had someone help me fix it, but he failed too. It now just hangs on the boot show thingy. (rather then flashing). Oddly, my cell can still access the computer, which I think is a good thing. As in, when I plug it while the screen stays put, my computers makes a sound. What could this mean? CMD to download mode?
As for boot loader, I highly doubt it. Since, I have had no reason to look-up what they are. ehhe.
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
supaduparimy said:
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
Click to expand...
Click to collapse
Are you using the Tmobile US vibrant or the bell/virgin canada vibrant?
SGH-T959 or I9000m?
If you have an I9000m you are in the wrong forum.
Oxirane said:
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Nononon, it is stuck on the galaxy text boot screen thingy. In other words, just like before, but this time it isnt flashing continuously. If it was the big yellow thingy, oh thank god... i wish.
As for that someone putting me in hardware lock, from my understanding, the only way to unbrick a locked device is through a jig. That being said, I searched up where I live for anyone with a jig, and to my luck, only one group had it. So I went there, and bam, it can now somewhat access the computer.
NOTE: I am going to receive a built jig in the mail in a few days.
From what I know, having a locked device, means, a jig is a must.
As for ADB, I am looking all over for instructions how to use that, but, I can't really find any through ones.
I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin.
I am really unfamiler with this samsung galaxy.
I did everything possible with ,y Motorola Milestone.
Awoooooo!!!! BAYWOLF's program Rules
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
dseldown said:
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
Click to expand...
Click to collapse
Ahha, thank you for the suggestion, but, that wont do. It was my original fix, towards getting into recovery/download mode. But, for some sad reason, it doesn't work for bricked devices. In simple, it just says device is not find. Ironicly, the computer makes a sound with the cell is plugged in, but, thats about it apparently.
Oh yes, the cell has to have USB debugging activated. But, since I have a bricked, it can't go within the phone to find it.
NOTE: it has always been in debugging mode.
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
dr_rp1234 said:
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
Click to expand...
Click to collapse
OK first, the stock images are 2.1 eclair not 2.2 froyo. Are you sure you have the right files? Are you sure your phone is a t959(3g, no front camera)and not t959v(4g, has front camera). Second, it sounds like a hard brick, if all else fails go to www.mobiletechvideos.com and check out the unbrickable mod and JTAG repair.
If you get your phone in DL mode and you have the correct Odin images, check the repartition box as well as others and run it.
Good luck
sent from my magic box to yours
Remove battery and sim and microsd. Leave out and press and hold power for 30 seconds or so. Leave battery out for a few minutes.
Put battery in and if you are on GB bootloader hold volume up and plug in USB. Might get you to download mode.
I did that with a friends phone about a year ago and got lucky. Odin recognized it. I read that somewhere here on XDA. May be a shot in the dark... but when you get desperate any new ideas to try can be a relief right?
Good luck to you.
After I messed with bootloaders and then tried to get back to stock with Kies I had this problem.
iTz KeeFy said:
You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Click to expand...
Click to collapse
I called Samsung and told them that I was just trying to upgrade to 2.2 with their software and they replaced my PCB (printed circuit board) for no cost (including shipping). I have no idea if they tried to figure out if I had really used Kies (if they could even figure it out with the state my phone was in) or if they just replaced the PCB blindly. Worth a shot, I'd say!
Thanks for your concern.
Zeferden said:
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Click to expand...
Click to collapse
Thanks for your concern.
But it did not work for me.
thanks
iTz KeeFy said:
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Thanks for your concern
Its T mobile vibrant T959.
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
dr_rp1234 said:
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
Click to expand...
Click to collapse
Sorry to say this but your phone is hard bricked, as in nothing can save it but a JTAG or warranty service. You can try to call Samsung and say you hard bricked your phone cause of kies, it worked for another.
Sent from Mount Olympus via Hermes.
you can try this, it works for many user
http://forum.xda-developers.com/showthread.php?p=17858853#post17858853
HELP!
I need help with my Samsung galaxy SGH-T959 Vibrant I got bricked so I was fixing it with odin until my phone fell and it disconnected and red letters and numbers came out. when I try turning my phone on it doesn't until I press the buttons to go to download mode those red numbers come out and I can't do anything. Please Help
When you pulled the battery, after it hung up with Odin, you corrupted the primary Bootloader, because it wasn't completely written in......Last weak possible option is to try every rocker/battery/cable sequence ETC, to get Odin to handshake with the phone!!.....If there's still no sign of life after doing that....Your only option will be to have it JTAG,d in order to rewrite the primary bootloader file back in it.....it'll never power on unless the primary bootloader executes properly!!....you can corrupt the 2ndary BL and the phone will only be soft bricked, but a primary BL corruption is phone DEATH!!....Only place I know of that's reliable is: mobiletechvideos.com....send it to them, they'll rewrite the primary BL back in it and I think 2.1 or 2.2 for you and mail the phone back to you!!....Good luck let us know if you got it powered on with any combination, as that could save another Bricker from having to send it out!!
Randomness Guy........Start your own thread in the troubleshooting forum, AND QUIT TRYING TO HIJACK THIS THREAD!!
as
surenzxx said:
I recently installed CyanogenMod with the Unlock Bootloader for noobs and I noticed the internal SD wasn't mounted. So I tried to flash an ICS ROM to see if it would work but it didn't. I was stuck at the boot screen. I tried restoring an ICS CWM backup and a JB backup but it didn't work. Currently, I have a flashed JB backup with a messed up touchscreen (because of the way I unlocked the boot-loader). It won't boot and I don't know how I can install the stock ROM. I really just want my phone to work at this point. I don't know if there's any way to use the offline method to flash a .kdz since I can't access android. I tried hard resetting, but when I do it starts up Clock Work Mod which I believe happens because of the way I unlocked boot-loader.
I'm trying to use this guide to fix it using SW upgrade. I did find a .bin and .fls which i'm downloading right now.
If anyone could help or give some advice that would be great. I really just want to use my phone, I don't care about flashing a custom ROM right now. As long as my phone works, I'll be happy.
Click to expand...
Click to collapse
Let me know if this works for you! Also you can do the offline fix just as long as you can get into S/W Upgrade mode. But I am curious to see if you can use the bin/fls files tool that you mentioned to get your phone working again.
as
surenzxx said:
Thanks for the reply! I'm planning on trying this method out tomorrow and ,if you don't mind, could you please elaborate on how I can do the offline fix with S/W Upgrade mode? I'll check back on the forum tomorrow!
Click to expand...
Click to collapse
Well just get your phone into S/W Upgrade mode and follow this tutorial. Getting into S/W Upgrade:
1. Get stock ROM here.
2. Turn off your phone
3. Press and hold the vol + button while inserting USB to computer
4. Keep holding the vol + until you see the S/W upgrade mode
5. Flash ROM with tutorial mentioned above.
Good Luck!
as
surenzxx said:
Isn't that just an infobank of all the KDZs? I'm pretty new, but can you flash a kdz with the offline method? To clarify, I was asking how to flash the kdz with the offline method in S/W upgrade mode. So ROMs/KDZs are essentially the same, right?
Edit: I read everything over again and realized what KDZs really are. I'm just wondering now if I could just hard reset in some other way because the LG Update Tool doesn't recognize my phone even though I see all the drivers. It's stuck at 15%.
Edit 2: I tried the method I suggested and it resulted with "Magic number does not concide".
So I'm stuck here with a phone that is stuck in bootloop, and has CWM installed. Can anyone help?
Click to expand...
Click to collapse
alright, this is all from memory but the offline flash didnt work as well for me when stuck in weird bootloops.
Step one-going back to online flash---->
A---
the easiest way i found was to go to C:/windows/system32/drivers/ect/hosts
right click>open with notepad
there should be two lines at the bottom
"127.0.0.1 csmg.lgmobile.com
127.0.0.1 csmgdl.lgmobile.com"
i would cut them out and paste them in a text doc in the same folder for reference later...
but either way you should remove them from the hosts file and save
B----
Make sure your small server is closed! once you minimize it it should go down to your status bar (shttps)
Step two-LGMS---->
make sure you have LG mobile support installed or install it.
open lg mobile support
install needed drivers for your phone
power your phone off/remove the battery
put battery back in
connect it to your computer holding down the volume up button
S/W UPDATE mode should pop up, if it doesn't preform and hardreset and try again til it works (it will)
then in the top right corner there should be a button or two click them both until you see
"restore update" or Update restore or something to that effect
select that
and let it ride man
i got my phone ****ed many times and just had to keep redoing this until it worked. if your bootloader is truely unlocked you can probably go through all that again and get CM10 working, i did but im still working through kinks.....
GOOD LUCK feel free to ask any more Q's about this process if you run into any problems
as
surenzxx said:
Hello! Sorry for the late reply. Before I start, do you mean LG Mobile Support form when I unlocked the boot-loader, if not could you provide a link to it? And by the way, when I tried hard resetting, the phone sent me back to CWM, any ideas why?
I was reading the CM10.2 notes yesterday and I realized there isn't supposed to be an internal SD card showing up when you plug in your phone to your PC. So I did tried fixing what wasn't broke.
Anyway, thanks for the info!
Click to expand...
Click to collapse
that could work, but i just downloaded the LG Mobile Support that i found from a google search. im pretty sure it was just from lg's website
GOOD LUCK
was your phone off before you hit the vol up and home, then clicked power for three-five seconds?
CROSSFREEZE said:
that could work, but i just downloaded the LG Mobile Support that i found from a google search. im pretty sure it was just from lg's website
GOOD LUCK
was your phone off before you hit the vol up and home, then clicked power for three-five seconds?
Click to expand...
Click to collapse
Such a late reply, sorry! I did nothing. Before you replied I flashed CM10.2 but never bothered to boot up my phone. Preparing to connect my phone to my comp, I couldn't start CWM so I figured " I'll just leave my phone plugged in for a few hours." Two hours later, my phone has a blank screen, i'm thinking "This shouldn't be blank? What the hell?." I pressed the power button and was greeted with Cid. I screamed out loud: "**** yeah!"
If people have the same problem as me all I did was: Reflash my my phone with 10.1, stock, 10.1 again, and then 10.2. I did that, only that.
What's funny is that I never checked to see if my phone was working after I flashed CM10.2. :silly:
Can't wait for Kit-Kat. Thank you for keeping up with my post, CROSSFREEZE I appreciate it!
Edit: I might submit a really specific and simplified version of the "Unlock Bootloader for Noobs P769" for the take of contributing.
surenzxx said:
Edit: I might submit a really specific and simplified version of the "Unlock Bootloader for Noobs P769" for the take of contributing.
Click to expand...
Click to collapse
love that idea, theres al;ot of reading i skimmed it and watched the video and after skippiing half the steps it worked for me but there was alot of messed up stuff to fix