hello all
I am having i9100G
whenever i try to flash the firmware with odin it fails at Boot.bin
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/157> Odin v.3 engine (ID:157)..
<ID:0/157> File analysis..
<ID:0/157> SetupConnection..
<ID:0/157> Initialzation..
<ID:0/157> Get PIT for mapping..
<ID:0/157> Firmware update start..
<ID:0/157> zImage
<ID:0/157> boot.bin
<ID:0/157>
<ID:0/157> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried many diffrent firmware but only boot.bin fails all the time.
what might be the resion i also triend repartition with PIT omap4_all_20110627_emmc.pit
but still same.
also phone doesnt come in recovery.
Download mode is ok.
tasz said:
hello all
I am having i9100G
whenever i try to flash the firmware with odin it fails at Boot.bin
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/157> Odin v.3 engine (ID:157)..
<ID:0/157> File analysis..
<ID:0/157> SetupConnection..
<ID:0/157> Initialzation..
<ID:0/157> Get PIT for mapping..
<ID:0/157> Firmware update start..
<ID:0/157> zImage
<ID:0/157> boot.bin
<ID:0/157>
<ID:0/157> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried many diffrent firmware but only boot.bin fails all the time.
what might be the resion i also triend repartition with PIT omap4_all_20110627_emmc.pit
but still same.
also phone doesnt come in recovery.
Download mode is ok.
Click to expand...
Click to collapse
what firmware did u flash anyway?
and why did u tick repartion and pit?
I triend XXKG2
also I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5
also i tried to repair with Riff jtag.
but still same phone fail to flash boot.bin
i checked with Riff jtag too there is no bad section in IC.
also i didnt got any full dump for this model of riff flash file.
tasz said:
I triend XXKG2
also I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5
also i tried to repair with Riff jtag.
but still same phone fail to flash boot.bin
i checked with Riff jtag too there is no bad section in IC.
also i didnt got any full dump for this model of riff flash file.
Click to expand...
Click to collapse
Do you know that ur md5 file its for I9100 not for I9100G?
now i am downloading
I9100G_4.0.3_rom_ZCLP5_ICS.rar
n making try
i also notice right now that Modem.bin also fail on MODEM_I9100XXKG2_REV_02_CL1037208.tar.md5
tasz said:
now i am downloading
I9100G_4.0.3_rom_ZCLP5_ICS.rar
n making try
i also notice right now that Modem.bin also fail on MODEM_I9100XXKG2_REV_02_CL1037208.tar.md5
Click to expand...
Click to collapse
What u wanna do anyway? To flash stock firmware? Or what? And ur modem also for i9100. Not for i9100g carefull man. U may got ur phone brick
Sent from my GT-I9100G
this time i tried another rom
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100G_APBOOT_I9100GZCLP5_CL440504_REVr07_user_low_ship.tar.md5 is valid.
<OSM> I9100G_CODE_I9100GZCLP5_CL440504_REVr07_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100GZCLP5_REV_00_CL1130849.tar.md5 is valid.
<OSM> GT-I9100G-MULTI-CSC-OZHLP5.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> MLO
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
but now i can goto cloclwork with this GT-I9100G_ICS_ClockworkMod-Recovery_5.5.0.4.tar
Nazz Mid said:
What u wanna do anyway? To flash stock firmware? Or what? And ur modem also for i9100. Not for i9100g carefull man. U may got ur phone brick
Sent from my GT-I9100G
Click to expand...
Click to collapse
I want fully flash this phone it came to me in dead condition but now i can use recovery mode but still no mount SD says
"E:unable to write to ums lunfile (No such fule or dir)"
tasz said:
I want fully flash this phone it came to me in dead condition but now i can use recovery mode but still no mount SD says
"E:unable to write to ums lunfile (No such fule or dir)"
Click to expand...
Click to collapse
Man dont whine about the sd card issue... whenevr u want to flash something just copy it to internal sd card and u will have no problem...
And please this is for everyone..
Just search on google or xda forums before you flash something (most important for the ones flashing first time).... y'all flash i9100 things on i9100G and then when you are screwed you start a new thread on xda...it is already too much crowded here... join the facebook i9100G group if you ve some noob questions that you didnt(i dont know why) search about before.....
Thank you : phew:
If my post helped, press the thanks button
tasz said:
I want fully flash this phone it came to me in dead condition but now i can use recovery mode but still no mount SD says
"E:unable to write to ums lunfile (No such fule or dir)"
Click to expand...
Click to collapse
Owh man. U can just browsing.stock firmware for i9100g at sammobile.com. Search your country and over there or u can just search stock firmware at this forum. Search for i9100g not the non g version.
You can search youtube also if u dont know how to flash using odin.
There are lots of tutorial here.. Just need to be search.
incarnation95 said:
Man dont whine about the sd card issue... whenevr u want to flash something just copy it to internal sd card and u will have no problem...
And please this is for everyone..
Just search on google or xda forums before you flash something (most important for the ones flashing first time).... y'all flash i9100 things on i9100G and then when you are screwed you start a new thread on xda...it is already too much crowded here... join the facebook i9100G group if you ve some noob questions that you didnt(i dont know why) search about before.....
Thank you : phew:
If my post helped, press the thanks button
Click to expand...
Click to collapse
Lol man. That way to directly.
Sent from my GT-I9100G
Nazz Mid said:
Owh man. U can just browsing.stock firmware for i9100g at sammobile.com. Search your country and over there or u can just search stock firmware at this forum. Search for i9100g not the non g version.
You can search youtube also if u dont know how to flash using odin.
There are lots of tutorial here.. Just need to be search.
Lol man. That way to directly.
Sent from my GT-I9100G
Click to expand...
Click to collapse
Is this a Chinese i9100G? If yes, the bootloader is locked.
<ID:0/018> Added!!
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> zImage
<ID:0/018> NAND Write Start!!
<ID:0/018> RQT_CLOSE !!
<ID:0/018> RES OK !!
<ID:0/018> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Removed!!
I get this message, after that the phone doesn't boot. It stays at the start screen with the yellow triangle. What to do now?
PeterFdeVries said:
<ID:0/018> Added!!
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> zImage
<ID:0/018> NAND Write Start!!
<ID:0/018> RQT_CLOSE !!
<ID:0/018> RES OK !!
<ID:0/018> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/018> Removed!!
I get this message, after that the phone doesn't boot. It stays at the start screen with the yellow triangle. What to do now?
Click to expand...
Click to collapse
Try go to cwm n wipe data/factory reset..or try reflash it again..
Sent from my GT-I9100G using Tapatalk 2
Please give I9100G odin , pit and drivers link.
fauzi_91 said:
Try go to cwm n wipe data/factory reset..or try reflash it again..
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
Can't go to CMW to wipe. I only get this screen, no matter what way I try to start the phone (except for using the volume down+home button+powerbutton, than I get into the ROM download mode, but no matter what kernel or ROM I use with Odin it gives me no other than the yellow triangle).
PeterFdeVries said:
Can't go to CMW to wipe. I only get this screen, no matter what way I try to start the phone (except for using the volume down+home button+powerbutton, than I get into the ROM download mode, but no matter what kernel or ROM I use with Odin it gives me no other than the yellow triangle).
Click to expand...
Click to collapse
Man. Did i know that is non G version? Did u flash I9100G firmware in that phone? U should search for i9100 firmware. Not i9100g.
Sent from my GT-I9100G
wow...owner of G user flashing non G software.
and Non G flashing G software.
guys please be careful. you are going to end up hard bricking your phone if you are not careful and dont read
ZCLP5 is a Chinese rom...if your phone is not a Chinese one you can't flash it via Odin........
Well..you can flash DXLP6....
Moved to Q&A
Related
<ID:0/040> Removed!!
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9100GZCKH4_CL484595_REVr07_user_low_ship.t ar.md5 is valid.
<OSM> CODE_I9100GZCKH4_CL484595_REVr07_user_low_ship.tar .md5 is valid.
<OSM> MODEM_I9100GZCKH4_REV_00_CL1050825.tar.md5 is valid.
<OSM> GT-I9100G-CSC-MULTI-OZHKH4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Set PIT file..
<ID:0/040> DO NOT TURN OFF TARGET!!
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any solution ?
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
darkshadow1997 said:
hey quickgsm
are you using a Chinese version of i9100g.because flashing chinese firmware with odin will only work for chinese i9100g not i9100g of any other country.post details about your i9100g.
Click to expand...
Click to collapse
i try to flash by many firmware if i use I9100GXXLPN_I9100GXEFLPN_XEF_2 or I9100GXXLPN_XEFLPN_France_Android_4.0.3 flash working 100% but phone stuck on samsung logo and if i use this firmware I9100GZCKH4 i jet error :
<ID:0/040> Firmware update start..
<ID:0/040> MLO
<ID:0/040> NAND Write Start!!
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS : my I9100G from france
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
ad_ek said:
why did you tick repartition for? un-tick taht option
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
omg why did you tick all????
only tick PDA file and put in the firmware
Click to expand...
Click to collapse
same issue if i don't tick repartition
quickgsm said:
same issue if i don't tick repartition
Click to expand...
Click to collapse
only tick the pda
nothing else
n try to flash a gb firmware firstly and thn try to flash ics
Devices-
Samsung galaxy s2 i9100g (Cm9-Nightly build)
sony walkman 8 ( Cm9 Stable )
Blackberry 9300 cracked for bbm
Press thnks if i tried to help
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
ad_ek said:
im not sure which guide you are following. but the normal procedure to flash firmware with odin is only using ODIN is to only tick the PDA option. and insert the firmware file which you have downloaded.. im trying to
help you ...but if you are getting mad...its ok. you can find your way.
Click to expand...
Click to collapse
yup your right ad_ek ..just use the pda option and dont touch other thing...can your phone boot to eg: recovery or download mode?use pit only when your phone is in soft brick state..if fail again try reboot your pc/change usb port and try again
Wonder why OP tick so many for what. Just tick PDA.. that it. Don't touch other things.
PIT only required if your phone is softbrick.
Chinese ROM
Looks like you have a Chinese phone with the locked bootloader, go back to stock for now.
-delete-
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
In my case it is only one file .tar.md5 can fix soft brick ?!!
i think it's better to flash a 3 part, since sometimes in a soft brick, a single files doesn't work , but a 3 file can fix soft brick
Click to expand...
Click to collapse
Sorry, but just flash the tar.md5 file as pda in odin. I really suggest not to think but to follow the instructions given.
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
Try to find the stock kernel for the chinese ICS...last time i had this situation i was able to flash the kernel even i could not get in download mode.
Don't panic. I am sure that the ppl around will help you so that you don't come out with an expensive paperweight
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPN_I9100GXXLPN_I9100GXEFLPN_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> MLO
<ID:0/010> NAND Write Start!!
<ID:0/010> Sbl.bin
<ID:0/010> param.lfs
<ID:0/010> factoryfs.img
<ID:0/010> zImage
<ID:0/010> modem.bin
<ID:0/010> cache.img
<ID:0/010> hidden.img
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Removed!!
phone still show Samsung galaxy S2 GT-I9100G can help me to fix it ?
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
antonio1475 said:
Which is your problem right now?
Yesterday I was flashing with Odin v1.85 and it was a total mess. I had NAND Write error like you had. I downloaded Odin v1.7 and I got my S2 back alive.
But with your last log, it flashed, so I don't understand what's your problem. Doesn't boot?
Click to expand...
Click to collapse
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
quickgsm said:
i am not able to go to recovery mood ! phone show Samsung galaxy S2 GT-I9100G
Click to expand...
Click to collapse
It just keeps in the first boot screen with/without a yellow triangle and the name Samsung and the model in white letters?
Please be a little more clear and descriptive so we can be sure what you are talking about
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
quickgsm said:
my problem :
the phone got stuck at boot up screen after the update showing the message Samsung Galaxy S2 GT-I9100G. Please provide the solution for this.
Click to expand...
Click to collapse
OK. So download a stock firmware for your model, which I guess you already have by the first post, and download Odin v1.7 (http://www.mediafire.com/?jyyux6yxem8uojn).
Use Odin v1.7 to flash just PDA (the CODE file). If doesn't boot (if it says error flashing let me know), try changing USB port (remember to reboot the device in download mode each time you want to flash with Odin).
If not, add the other files but without PIT. Finally if it doesn't boot, try with PIT too.
Let me know your progress. Best luck
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
so you tried to flash a pit file?
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
sleepingsword said:
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
Click to expand...
Click to collapse
I just manged to help others over this soft brick problem, by flashing one of Darkys roms !!
Just find your country/region dl it and flash following his instructions
http://www.darkyrom.com/index.php?forum/#rom-darkyrom-iii-i9300.122
---------- Post added at 09:11 AM ---------- Previous post was at 09:07 AM ----------
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Sammy rom wont solve the problem - Darkyrom will :laugh:
Glebun said:
so you tried to flash a pit file?
Click to expand...
Click to collapse
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
sleepingsword said:
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
Click to expand...
Click to collapse
Are you blind ??
Stock wont do, Darky will!
Get CWM again do this>
*Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Now you successfully installed CWM + Super User + CWM Manager.
spoonymoon said:
Are you blind ??
Stock wont do, Darky will!
Click to expand...
Click to collapse
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
sleepingsword said:
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
Click to expand...
Click to collapse
Look one post above
spoonymoon said:
Look one post above
Click to expand...
Click to collapse
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
sleepingsword said:
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
Click to expand...
Click to collapse
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whitout reparation) thats all
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
spoonymoon said:
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whiteout reparation) thats all
Link>http://speedy.sh/kcqvD/
Click to expand...
Click to collapse
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
sleepingsword said:
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
spoonymoon said:
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
Click to expand...
Click to collapse
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
EDIT:
tried this PIT file: GT-I9300_mx_20120329
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sleepingsword said:
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
Click to expand...
Click to collapse
Try Odin v.3.07
dont work
Not sure but think , its possible a corrupted emmc !
But flashing a wrong pit file could make things even worse - lets investigate a bit more ?
Try latest odin 3.07
Btw: its a long shot but try flashing whitout external sd - remove it first
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Damm sorry to hear br0
And you're welcome
TRY THIS COULD WORK
http://www.androidauthority.com/galaxy-s3-gt-i9300-clockworkmod-recovery-6-0-1-0-install-103347/
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
painterceessie said:
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
Click to expand...
Click to collapse
with what excuse did they tell you no warrenty?
even if you flashed it they cant say no warrenty, a ok phone dosent burn emmc because of a flash, actually in eu theres a eu statement proven at court that says they cant say so, ill find the page for you, print that and throw that in their faces!
Searching is not really painful....have you tried it?
Follow the screenshots and use the Odin version included.
hey,
so my friend brought me his S3, never rooted or tampered with. He just said the phone went into boot and never recovered. I can go in download mode but not recovery (my initial plan was to wipe cache).
he would kind of want his data intact but I don't know how viable that is by now..
Any advice?
Thank you
Posklapenzi said:
hey,
so my friend brought me his S3, never rooted or tampered with. He just said the phone went into boot and never recovered. I can go in download mode but not recovery (my initial plan was to wipe cache).
he would kind of want his data intact but I don't know how viable that is by now..
Any advice?
Thank you
Click to expand...
Click to collapse
Try flashing a custom recovery like twrp or philz touch. But it actually sounds like a soft brick. worst case scenario you would have to flash a new firmware/
this is the last one http://forum.xda-developers.com/showthread.php?t=1835931
Posklapenzi said:
hey,
so my friend brought me his S3, never rooted or tampered with. He just said the phone went into boot and never recovered. I can go in download mode but not recovery (my initial plan was to wipe cache).
he would kind of want his data intact but I don't know how viable that is by now..
Any advice?
Thank you
Click to expand...
Click to collapse
The phone's own recovery mode is not much flexible as other third-part recoveries. So I guess you have to install CWM recovery and wipe dalvik cache from there before booting. Try installing CWM recovery via Odin and then wipe dalvik cache. And don't worry, installing custom recovery won't root your phone.
If the stock recovery can, wipe the cache and dalvik cache
Sent from my GT-I9300 using Tapatalk
It appears I can't flash any recovery:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Report from Odin. Could I flash a stock firmware tho?
Can't mount stock rom either. I tried ticking repartition too, this is what comes out:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMG4_I9300DBTEMG3_I9300XXEMG4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1949)
<OSM> All threads completed. (succeed 0 / failed 1)
Bump.. Please help someone.
Make sure you have the latest odin and the correct drivers and also make sure kies is not open
Sent from my SAMSUNG GT-N7105 using XDA Premium 4 mobile app
Posklapenzi said:
It appears I can't flash any recovery:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Report from Odin. Could I flash a stock firmware tho?
Click to expand...
Click to collapse
Try to flash PIT partition via odin( be careful you must have the PIT file sweatable for your model )
abidifethi said:
Try to flash PIT partition via odin( be careful you must have the PIT file sweatable for your model )
Click to expand...
Click to collapse
How can I know what that is? I can't boot the phone to see the exact model? Says I9300GSMH on the back behind the battery so I should assume that's accurate?
Posklapenzi said:
How can I know what that is? I can't boot the phone to see the exact model? Says I9300GSMH on the back behind the battery so I should assume that's accurate?
Click to expand...
Click to collapse
http://widefide.com/mobile/galaxy-s3-boot-problem-solution
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
KizzleKat said:
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
Click to expand...
Click to collapse
Get the official firmware needed on Sammobile.com, you need an account on there. Don't worry it's free. Flash it as PDA on Odin. Make sure your phone is in download mode (volume up+volume down+power). If it boots, the boot animation might start looping. From theres you can access recovery (volume up+power+home). In recovery you wipe data and wipe cache and select reboot. It should work.
Sent from my GT-I8190N using Tapatalk
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Galaxy_Ace_Love said:
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Click to expand...
Click to collapse
Odin 3.07 supports one file package
Humm...
iamareebjamal said:
Odin 3.07 supports one file package
Click to expand...
Click to collapse
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
KizzleKat said:
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
Click to expand...
Click to collapse
Format the data
Put the pit file and tick Repartition. And then flash with Odin.
And you have to use Cooperve pit, not Totoro, it's for SGY
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
KizzleKat said:
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
Click to expand...
Click to collapse
Follow these Guidehttp://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using Tapatalk 2
I am trying to flash phone back to stock ROM due to my phone only booting in Odin mode, but I keep getting FAIL! flash attempts in Odin. The failure occurs at the message line FAIL! (Auth). I have tried flashing VRUAMDK_NoWipe.tar and CF-Auto-Root-jflte-jfltexx-gti9505.
Portisface said:
I am trying to flash phone back to stock ROM due to my phone only booting in Odin mode, but I keep getting FAIL! flash attempts in Odin. The failure occurs at the message line FAIL! (Auth). I have tried flashing VRUAMDK_NoWipe.tar and CF-Auto-Root-jflte-jfltexx-gti9505.
Click to expand...
Click to collapse
Were you originally on MDK? If so, have you checked MD5?
riker147 said:
Were you originally on MDK? If so, have you checked MD5?
Click to expand...
Click to collapse
Sorry the full filename is VRUAMDK_NoWipe.tar.md5. Is that what you're talking about?
Portisface said:
Sorry the full filename is VRUAMDK_NoWipe.tar.md5. Is that what you're talking about?
Click to expand...
Click to collapse
No. What build were you on before your problems?
riker147 said:
No. What build were you on before your problems?
Click to expand...
Click to collapse
I don't remember other than I was at 4.3. I had my phone rooted using SuperSU and I tried unrooting so I could download the latest OTA. I was still getting errors to install updates after disabling SuperSU and was getting sick of my phone constantly trying to update so I decided to try to revert back to stock. I downloaded Odin and the TAR file I mentioned and followed the instructions to restore back to stock ROM. I received that error and found in another forum that someone got it to work using CF-Auto-Root-jflte-jfltexx-gti9505. I tried that to and same issue. I can't find any other solutions.
Portisface said:
I don't remember other than I was at 4.3. I had my phone rooted using SuperSU and I tried unrooting so I could download the latest OTA. I was still getting errors to install updates after disabling SuperSU and was getting sick of my phone constantly trying to update so I decided to try to revert back to stock. I downloaded Odin and the TAR file I mentioned and followed the instructions to restore back to stock ROM. I received that error and found in another forum that someone got it to work using CF-Auto-Root-jflte-jfltexx-gti9505. I tried that to and same issue. I can't find any other solutions.
Click to expand...
Click to collapse
You need to find what build you were on because you can't flash an older build. You can only flash your original build or newer. If you want the latest OTA, (Kit Kat), you need to download the .tar file for that.
riker147 said:
You need to find what build you were on because you can't flash an older build. You can only flash your original build or newer. If you want the latest OTA, (Kit Kat), you need to download the .tar file for that.
Click to expand...
Click to collapse
I am currently downloading Kit Kat. However, I was trying to flash it one more time to copy and paste the message lines here and now the error is "There is no PIT partition." I have already downloaded the PIT for my phone. I am I gonna have to use that now?
Portisface said:
I am currently downloading Kit Kat. However, I was trying to flash it one more time to copy and paste the message lines here and now the error is "There is no PIT partition." I have already downloaded the PIT for my phone. I am I gonna have to use that now?
Click to expand...
Click to collapse
I think you might me be over complicating things. If you're going with NC5 (Kit Kat) and you can use Odin, I think all you're going to need is the .tar file.
riker147 said:
I think you might me be over complicating things. If you're going with NC5 (Kit Kat) and you can use Odin, I think all you're going to need is the .tar file.
Click to expand...
Click to collapse
So the "no PIT partition" message isn't a problem?
Hi,
I've been trying to revert to stock rom just like the OP. As you'll see my adventure ends at aboot.mbn. I downloaded the latest build (SCH-I545_MDK_562219_Stock_Restore.tar.md5) according the tutorial I'm using. I'm using the latest version of Odin3 1.85 (also according to the tutorial. Also, I'm using the Samsung Galaxy S4 VZW (SCH-1545) phone. Any and all help will be appreciated!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
gotshot87 said:
Hi,
I've been trying to revert to stock rom just like the OP. As you'll see my adventure ends at aboot.mbn. I downloaded the latest build (SCH-I545_MDK_562219_Stock_Restore.tar.md5) according the tutorial I'm using. I'm using the latest version of Odin3 1.85 (also according to the tutorial. Also, I'm using the Samsung Galaxy S4 VZW (SCH-1545) phone. Any and all help will be appreciated!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi guys,
1st thing thank you for the informations and knowledge i have learned here at XDA.
I have the same problem . I have done all i believe i can from all the research i have done and come acrossed. Hands up in the air and i surrender.
Need some help
If anybody could please fhank you so much...
It looks like you are trying to unlock the wrong baseband version.
The only Verizon Samsung Galaxy S4 (SCH-I545), aka jfltevzw, that has an unlockable bootloader is the one that has the baseband version "I545VRUAMDK".
And once the baseband is updated to a newer one, it cannot be downgraded.
Sent from my SCH-I535 using XDA Free mobile app